/* PC hardware initialisation */
static void s390_init(ram_addr_t my_ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env = NULL;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
ram_addr_t kernel_size = 0;
ram_addr_t initrd_offset;
ram_addr_t initrd_size = 0;
int shift = 0;
uint8_t *storage_keys;
void *virtio_region;
target_phys_addr_t virtio_region_len;
target_phys_addr_t virtio_region_start;
int i;
/* s390x ram size detection needs a 16bit multiplier + an increment. So
guests > 64GB can be specified in 2MB steps etc. */
while ((my_ram_size >> (20 + shift)) > 65535) {
shift++;
}
my_ram_size = my_ram_size >> (20 + shift) << (20 + shift);
/* lets propagate the changed ram size into the global variable. */
ram_size = my_ram_size;
/* get a BUS */
s390_bus = s390_virtio_bus_init(&my_ram_size);
/* allocate RAM */
memory_region_init_ram(ram, "s390.ram", my_ram_size);
vmstate_register_ram_global(ram);
memory_region_add_subregion(sysmem, 0, ram);
/* clear virtio region */
virtio_region_len = my_ram_size - ram_size;
virtio_region_start = ram_size;
virtio_region = cpu_physical_memory_map(virtio_region_start,
&virtio_region_len, true);
memset(virtio_region, 0, virtio_region_len);
cpu_physical_memory_unmap(virtio_region, virtio_region_len, 1,
virtio_region_len);
/* allocate storage keys */
storage_keys = g_malloc0(my_ram_size / TARGET_PAGE_SIZE);
/* init CPUs */
if (cpu_model == NULL) {
cpu_model = "host";
}
ipi_states = g_malloc(sizeof(CPUState *) * smp_cpus);
for (i = 0; i < smp_cpus; i++) {
CPUState *tmp_env;
tmp_env = cpu_init(cpu_model);
if (!env) {
env = tmp_env;
}
ipi_states[i] = tmp_env;
tmp_env->halted = 1;
tmp_env->exception_index = EXCP_HLT;
tmp_env->storage_keys = storage_keys;
}
/* One CPU has to run */
s390_add_running_cpu(env);
if (kernel_filename) {
kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, NULL,
NULL, 1, ELF_MACHINE, 0);
if (kernel_size == -1UL) {
kernel_size = load_image_targphys(kernel_filename, 0, ram_size);
}
/*
* we can not rely on the ELF entry point, since up to 3.2 this
* value was 0x800 (the SALIPL loader) and it wont work. For
* all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine.
*/
env->psw.addr = KERN_IMAGE_START;
env->psw.mask = 0x0000000180000000ULL;
} else {
ram_addr_t bios_size = 0;
char *bios_filename;
/* Load zipl bootloader */
if (bios_name == NULL) {
bios_name = ZIPL_FILENAME;
}
bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
bios_size = load_image_targphys(bios_filename, ZIPL_LOAD_ADDR, 4096);
g_free(bios_filename);
if ((long)bios_size < 0) {
hw_error("could not load bootloader '%s'\n", bios_name);
}
if (bios_size > 4096) {
hw_error("stage1 bootloader is > 4k\n");
}
env->psw.addr = ZIPL_START;
env->psw.mask = 0x0000000180000000ULL;
}
if (initrd_filename) {
initrd_offset = INITRD_START;
while (kernel_size + 0x100000 > initrd_offset) {
initrd_offset += 0x100000;
}
initrd_size = load_image_targphys(initrd_filename, initrd_offset,
ram_size - initrd_offset);
/* we have to overwrite values in the kernel image, which are "rom" */
memcpy(rom_ptr(INITRD_PARM_START), &initrd_offset, 8);
memcpy(rom_ptr(INITRD_PARM_SIZE), &initrd_size, 8);
}
if (kernel_cmdline) {
/* we have to overwrite values in the kernel image, which are "rom" */
memcpy(rom_ptr(KERN_PARM_AREA), kernel_cmdline,
strlen(kernel_cmdline) + 1);
}
/* Create VirtIO network adapters */
for(i = 0; i < nb_nics; i++) {
NICInfo *nd = &nd_table[i];
DeviceState *dev;
if (!nd->model) {
nd->model = g_strdup("virtio");
}
if (strcmp(nd->model, "virtio")) {
fprintf(stderr, "S390 only supports VirtIO nics\n");
exit(1);
}
dev = qdev_create((BusState *)s390_bus, "virtio-net-s390");
qdev_set_nic_properties(dev, nd);
qdev_init_nofail(dev);
}
/* Create VirtIO disk drives */
for(i = 0; i < MAX_BLK_DEVS; i++) {
DriveInfo *dinfo;
DeviceState *dev;
dinfo = drive_get(IF_IDE, 0, i);
if (!dinfo) {
continue;
}
dev = qdev_create((BusState *)s390_bus, "virtio-blk-s390");
qdev_prop_set_drive_nofail(dev, "drive", dinfo->bdrv);
qdev_init_nofail(dev);
}
}
static uint64_t sun4u_load_kernel(const char *kernel_filename,
const char *initrd_filename,
ram_addr_t RAM_size, uint64_t *initrd_size,
uint64_t *initrd_addr, uint64_t *kernel_addr,
uint64_t *kernel_entry)
{
int linux_boot;
unsigned int i;
long kernel_size;
uint8_t *ptr;
uint64_t kernel_top;
linux_boot = (kernel_filename != NULL);
kernel_size = 0;
if (linux_boot) {
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_size = load_elf(kernel_filename, NULL, NULL, kernel_entry,
kernel_addr, &kernel_top, 1, ELF_MACHINE, 0);
if (kernel_size < 0) {
*kernel_addr = KERNEL_LOAD_ADDR;
*kernel_entry = KERNEL_LOAD_ADDR;
kernel_size = load_aout(kernel_filename, KERNEL_LOAD_ADDR,
RAM_size - KERNEL_LOAD_ADDR, bswap_needed,
TARGET_PAGE_SIZE);
}
if (kernel_size < 0) {
kernel_size = load_image_targphys(kernel_filename,
KERNEL_LOAD_ADDR,
RAM_size - KERNEL_LOAD_ADDR);
}
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
/* load initrd above kernel */
*initrd_size = 0;
if (initrd_filename) {
*initrd_addr = TARGET_PAGE_ALIGN(kernel_top);
*initrd_size = load_image_targphys(initrd_filename,
*initrd_addr,
RAM_size - *initrd_addr);
if ((int)*initrd_size < 0) {
fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
}
if (*initrd_size > 0) {
for (i = 0; i < 64 * TARGET_PAGE_SIZE; i += TARGET_PAGE_SIZE) {
ptr = rom_ptr(*kernel_addr + i);
if (ldl_p(ptr + 8) == 0x48647253) { /* HdrS */
stl_p(ptr + 24, *initrd_addr + *kernel_addr);
stl_p(ptr + 28, *initrd_size);
break;
}
}
}
}
return kernel_size;
}
static void s390_ipl_realize(DeviceState *dev, Error **errp)
{
S390IPLState *ipl = S390_IPL(dev);
uint64_t pentry = KERN_IMAGE_START;
int kernel_size;
Error *err = NULL;
int bios_size;
char *bios_filename;
/*
* Always load the bios if it was enforced,
* even if an external kernel has been defined.
*/
if (!ipl->kernel || ipl->enforce_bios) {
uint64_t fwbase = (MIN(ram_size, 0x80000000U) - 0x200000) & ~0xffffUL;
if (bios_name == NULL) {
bios_name = ipl->firmware;
}
bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (bios_filename == NULL) {
error_setg(&err, "could not find stage1 bootloader");
goto error;
}
bios_size = load_elf(bios_filename, bios_translate_addr, &fwbase,
&ipl->bios_start_addr, NULL, NULL, 1,
EM_S390, 0, 0);
if (bios_size > 0) {
/* Adjust ELF start address to final location */
ipl->bios_start_addr += fwbase;
} else {
/* Try to load non-ELF file */
bios_size = load_image_targphys(bios_filename, ZIPL_IMAGE_START,
4096);
ipl->bios_start_addr = ZIPL_IMAGE_START;
}
g_free(bios_filename);
if (bios_size == -1) {
error_setg(&err, "could not load bootloader '%s'", bios_name);
goto error;
}
/* default boot target is the bios */
ipl->start_addr = ipl->bios_start_addr;
}
if (ipl->kernel) {
kernel_size = load_elf(ipl->kernel, NULL, NULL, &pentry, NULL,
NULL, 1, EM_S390, 0, 0);
if (kernel_size < 0) {
kernel_size = load_image_targphys(ipl->kernel, 0, ram_size);
}
if (kernel_size < 0) {
error_setg(&err, "could not load kernel '%s'", ipl->kernel);
goto error;
}
/*
* Is it a Linux kernel (starting at 0x10000)? If yes, we fill in the
* kernel parameters here as well. Note: For old kernels (up to 3.2)
* we can not rely on the ELF entry point - it was 0x800 (the SALIPL
* loader) and it won't work. For this case we force it to 0x10000, too.
*/
if (pentry == KERN_IMAGE_START || pentry == 0x800) {
ipl->start_addr = KERN_IMAGE_START;
/* Overwrite parameters in the kernel image, which are "rom" */
strcpy(rom_ptr(KERN_PARM_AREA), ipl->cmdline);
} else {
ipl->start_addr = pentry;
}
if (ipl->initrd) {
ram_addr_t initrd_offset;
int initrd_size;
initrd_offset = INITRD_START;
while (kernel_size + 0x100000 > initrd_offset) {
initrd_offset += 0x100000;
}
initrd_size = load_image_targphys(ipl->initrd, initrd_offset,
ram_size - initrd_offset);
if (initrd_size == -1) {
error_setg(&err, "could not load initrd '%s'", ipl->initrd);
goto error;
}
/*
* we have to overwrite values in the kernel image,
* which are "rom"
*/
stq_p(rom_ptr(INITRD_PARM_START), initrd_offset);
stq_p(rom_ptr(INITRD_PARM_SIZE), initrd_size);
}
}
/*
* Don't ever use the migrated values, they could come from a different
* BIOS and therefore don't work. But still migrate the values, so
* QEMUs relying on it don't break.
*/
ipl->compat_start_addr = ipl->start_addr;
ipl->compat_bios_start_addr = ipl->bios_start_addr;
qemu_register_reset(qdev_reset_all_fn, dev);
error:
error_propagate(errp, err);
}
static unsigned long sun4m_load_kernel(const char *kernel_filename,
const char *initrd_filename,
ram_addr_t RAM_size)
{
int linux_boot;
unsigned int i;
long initrd_size, kernel_size;
uint8_t *ptr;
linux_boot = (kernel_filename != NULL);
kernel_size = 0;
if (linux_boot) {
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_size = load_elf(kernel_filename, translate_kernel_address, NULL,
NULL, NULL, NULL, 1, ELF_MACHINE, 0);
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, KERNEL_LOAD_ADDR,
RAM_size - KERNEL_LOAD_ADDR, bswap_needed,
TARGET_PAGE_SIZE);
if (kernel_size < 0)
kernel_size = load_image_targphys(kernel_filename,
KERNEL_LOAD_ADDR,
RAM_size - KERNEL_LOAD_ADDR);
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
/* load initrd */
initrd_size = 0;
if (initrd_filename) {
initrd_size = load_image_targphys(initrd_filename,
INITRD_LOAD_ADDR,
RAM_size - INITRD_LOAD_ADDR);
if (initrd_size < 0) {
fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
}
if (initrd_size > 0) {
for (i = 0; i < 64 * TARGET_PAGE_SIZE; i += TARGET_PAGE_SIZE) {
ptr = rom_ptr(KERNEL_LOAD_ADDR + i);
if (ldl_p(ptr) == 0x48647253) { // HdrS
stl_p(ptr + 16, INITRD_LOAD_ADDR);
stl_p(ptr + 20, initrd_size);
break;
}
}
}
}
return kernel_size;
}
/* CPUClass::reset() */
static void arm_cpu_reset(CPUState *s)
{
ARMCPU *cpu = ARM_CPU(s);
ARMCPUClass *acc = ARM_CPU_GET_CLASS(cpu);
CPUARMState *env = &cpu->env;
acc->parent_reset(s);
memset(env, 0, offsetof(CPUARMState, features));
g_hash_table_foreach(cpu->cp_regs, cp_reg_reset, cpu);
g_hash_table_foreach(cpu->cp_regs, cp_reg_check_reset, cpu);
env->vfp.xregs[ARM_VFP_FPSID] = cpu->reset_fpsid;
env->vfp.xregs[ARM_VFP_MVFR0] = cpu->mvfr0;
env->vfp.xregs[ARM_VFP_MVFR1] = cpu->mvfr1;
env->vfp.xregs[ARM_VFP_MVFR2] = cpu->mvfr2;
cpu->powered_off = cpu->start_powered_off;
s->halted = cpu->start_powered_off;
if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q';
}
if (arm_feature(env, ARM_FEATURE_AARCH64)) {
/* 64 bit CPUs always start in 64 bit mode */
env->aarch64 = 1;
#if defined(CONFIG_USER_ONLY)
env->pstate = PSTATE_MODE_EL0t;
/* Userspace expects access to DC ZVA, CTL_EL0 and the cache ops */
env->cp15.sctlr_el[1] |= SCTLR_UCT | SCTLR_UCI | SCTLR_DZE;
/* and to the FP/Neon instructions */
env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 2, 3);
#else
/* Reset into the highest available EL */
if (arm_feature(env, ARM_FEATURE_EL3)) {
env->pstate = PSTATE_MODE_EL3h;
} else if (arm_feature(env, ARM_FEATURE_EL2)) {
env->pstate = PSTATE_MODE_EL2h;
} else {
env->pstate = PSTATE_MODE_EL1h;
}
env->pc = cpu->rvbar;
#endif
} else {
#if defined(CONFIG_USER_ONLY)
/* Userspace expects access to cp10 and cp11 for FP/Neon */
env->cp15.cpacr_el1 = deposit64(env->cp15.cpacr_el1, 20, 4, 0xf);
#endif
}
#if defined(CONFIG_USER_ONLY)
env->uncached_cpsr = ARM_CPU_MODE_USR;
/* For user mode we must enable access to coprocessors */
env->vfp.xregs[ARM_VFP_FPEXC] = 1 << 30;
if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
env->cp15.c15_cpar = 3;
} else if (arm_feature(env, ARM_FEATURE_XSCALE)) {
env->cp15.c15_cpar = 1;
}
#else
/* SVC mode with interrupts disabled. */
env->uncached_cpsr = ARM_CPU_MODE_SVC;
env->daif = PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F;
/* On ARMv7-M the CPSR_I is the value of the PRIMASK register, and is
* clear at reset. Initial SP and PC are loaded from ROM.
*/
if (IS_M(env)) {
uint32_t initial_msp; /* Loaded from 0x0 */
uint32_t initial_pc; /* Loaded from 0x4 */
uint8_t *rom;
env->daif &= ~PSTATE_I;
rom = rom_ptr(0);
if (rom) {
/* Address zero is covered by ROM which hasn't yet been
* copied into physical memory.
*/
initial_msp = ldl_p(rom);
initial_pc = ldl_p(rom + 4);
} else {
/* Address zero not covered by a ROM blob, or the ROM blob
* is in non-modifiable memory and this is a second reset after
* it got copied into memory. In the latter case, rom_ptr
* will return a NULL pointer and we should use ldl_phys instead.
*/
initial_msp = ldl_phys(s->as, 0);
initial_pc = ldl_phys(s->as, 4);
}
env->regs[13] = initial_msp & 0xFFFFFFFC;
env->regs[15] = initial_pc & ~1;
env->thumb = initial_pc & 1;
}
/* AArch32 has a hard highvec setting of 0xFFFF0000. If we are currently
* executing as AArch32 then check if highvecs are enabled and
* adjust the PC accordingly.
*/
if (A32_BANKED_CURRENT_REG_GET(env, sctlr) & SCTLR_V) {
env->regs[15] = 0xFFFF0000;
}
env->vfp.xregs[ARM_VFP_FPEXC] = 0;
#endif
set_flush_to_zero(1, &env->vfp.standard_fp_status);
set_flush_inputs_to_zero(1, &env->vfp.standard_fp_status);
set_default_nan_mode(1, &env->vfp.standard_fp_status);
set_float_detect_tininess(float_tininess_before_rounding,
&env->vfp.fp_status);
set_float_detect_tininess(float_tininess_before_rounding,
&env->vfp.standard_fp_status);
tlb_flush(s, 1);
#ifndef CONFIG_USER_ONLY
if (kvm_enabled()) {
kvm_arm_reset_vcpu(cpu);
}
#endif
hw_breakpoint_update_all(cpu);
hw_watchpoint_update_all(cpu);
}
/* CPUClass::reset() */
static void arm_cpu_reset(CPUState *s)
{
ARMCPU *cpu = ARM_CPU(s);
ARMCPUClass *acc = ARM_CPU_GET_CLASS(cpu);
CPUARMState *env = &cpu->env;
acc->parent_reset(s);
memset(env, 0, offsetof(CPUARMState, features));
g_hash_table_foreach(cpu->cp_regs, cp_reg_reset, cpu);
env->vfp.xregs[ARM_VFP_FPSID] = cpu->reset_fpsid;
env->vfp.xregs[ARM_VFP_MVFR0] = cpu->mvfr0;
env->vfp.xregs[ARM_VFP_MVFR1] = cpu->mvfr1;
env->vfp.xregs[ARM_VFP_MVFR2] = cpu->mvfr2;
if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q';
}
if (arm_feature(env, ARM_FEATURE_AARCH64)) {
/* 64 bit CPUs always start in 64 bit mode */
env->aarch64 = 1;
#if defined(CONFIG_USER_ONLY)
env->pstate = PSTATE_MODE_EL0t;
/* Userspace expects access to CTL_EL0 and the cache ops */
env->cp15.c1_sys |= SCTLR_UCT | SCTLR_UCI;
/* and to the FP/Neon instructions */
env->cp15.c1_coproc = deposit64(env->cp15.c1_coproc, 20, 2, 3);
#else
env->pstate = PSTATE_MODE_EL1h;
env->pc = cpu->rvbar;
#endif
} else {
#if defined(CONFIG_USER_ONLY)
/* Userspace expects access to cp10 and cp11 for FP/Neon */
env->cp15.c1_coproc = deposit64(env->cp15.c1_coproc, 20, 4, 0xf);
#endif
}
#if defined(CONFIG_USER_ONLY)
env->uncached_cpsr = ARM_CPU_MODE_USR;
/* For user mode we must enable access to coprocessors */
env->vfp.xregs[ARM_VFP_FPEXC] = 1 << 30;
if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
env->cp15.c15_cpar = 3;
} else if (arm_feature(env, ARM_FEATURE_XSCALE)) {
env->cp15.c15_cpar = 1;
}
#else
/* SVC mode with interrupts disabled. */
env->uncached_cpsr = ARM_CPU_MODE_SVC;
env->daif = PSTATE_D | PSTATE_A | PSTATE_I | PSTATE_F;
/* On ARMv7-M the CPSR_I is the value of the PRIMASK register, and is
clear at reset. Initial SP and PC are loaded from ROM. */
if (IS_M(env)) {
uint32_t pc;
uint8_t *rom;
env->daif &= ~PSTATE_I;
rom = rom_ptr(0);
if (rom) {
/* We should really use ldl_phys here, in case the guest
modified flash and reset itself. However images
loaded via -kernel have not been copied yet, so load the
values directly from there. */
env->regs[13] = ldl_p(rom) & 0xFFFFFFFC;
pc = ldl_p(rom + 4);
env->thumb = pc & 1;
env->regs[15] = pc & ~1;
}
}
if (env->cp15.c1_sys & SCTLR_V) {
env->regs[15] = 0xFFFF0000;
}
env->vfp.xregs[ARM_VFP_FPEXC] = 0;
#endif
set_flush_to_zero(1, &env->vfp.standard_fp_status);
set_flush_inputs_to_zero(1, &env->vfp.standard_fp_status);
set_default_nan_mode(1, &env->vfp.standard_fp_status);
set_float_detect_tininess(float_tininess_before_rounding,
&env->vfp.fp_status);
set_float_detect_tininess(float_tininess_before_rounding,
&env->vfp.standard_fp_status);
tlb_flush(s, 1);
/* Reset is a state change for some CPUARMState fields which we
* bake assumptions about into translated code, so we need to
* tb_flush().
*/
tb_flush(env);
#ifndef CONFIG_USER_ONLY
if (kvm_enabled()) {
kvm_arm_reset_vcpu(cpu);
}
#endif
}
/* CPUClass::reset() */
static void arm_cpu_reset(CPUState *s)
{
ARMCPU *cpu = ARM_CPU(s);
ARMCPUClass *acc = ARM_CPU_GET_CLASS(cpu);
CPUARMState *env = &cpu->env;
acc->parent_reset(s);
memset(env, 0, offsetof(CPUARMState, breakpoints));
g_hash_table_foreach(cpu->cp_regs, cp_reg_reset, cpu);
env->vfp.xregs[ARM_VFP_FPSID] = cpu->reset_fpsid;
env->vfp.xregs[ARM_VFP_MVFR0] = cpu->mvfr0;
env->vfp.xregs[ARM_VFP_MVFR1] = cpu->mvfr1;
if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
env->iwmmxt.cregs[ARM_IWMMXT_wCID] = 0x69051000 | 'Q';
}
#if defined(CONFIG_USER_ONLY)
env->uncached_cpsr = ARM_CPU_MODE_USR;
/* For user mode we must enable access to coprocessors */
env->vfp.xregs[ARM_VFP_FPEXC] = 1 << 30;
if (arm_feature(env, ARM_FEATURE_IWMMXT)) {
env->cp15.c15_cpar = 3;
} else if (arm_feature(env, ARM_FEATURE_XSCALE)) {
env->cp15.c15_cpar = 1;
}
#else
/* SVC mode with interrupts disabled. */
env->uncached_cpsr = ARM_CPU_MODE_SVC | CPSR_A | CPSR_F | CPSR_I;
/* On ARMv7-M the CPSR_I is the value of the PRIMASK register, and is
clear at reset. Initial SP and PC are loaded from ROM. */
if (IS_M(env)) {
uint32_t pc;
uint8_t *rom;
env->uncached_cpsr &= ~CPSR_I;
rom = rom_ptr(0);
if (rom) {
/* We should really use ldl_phys here, in case the guest
modified flash and reset itself. However images
loaded via -kernel have not been copied yet, so load the
values directly from there. */
env->regs[13] = ldl_p(rom);
pc = ldl_p(rom + 4);
env->thumb = pc & 1;
env->regs[15] = pc & ~1;
}
}
env->vfp.xregs[ARM_VFP_FPEXC] = 0;
#endif
set_flush_to_zero(1, &env->vfp.standard_fp_status);
set_flush_inputs_to_zero(1, &env->vfp.standard_fp_status);
set_default_nan_mode(1, &env->vfp.standard_fp_status);
set_float_detect_tininess(float_tininess_before_rounding,
&env->vfp.fp_status);
set_float_detect_tininess(float_tininess_before_rounding,
&env->vfp.standard_fp_status);
tlb_flush(env, 1);
/* Reset is a state change for some CPUARMState fields which we
* bake assumptions about into translated code, so we need to
* tb_flush().
*/
tb_flush(env);
}
static int s390_ipl_init(SysBusDevice *dev)
{
S390IPLState *ipl = S390_IPL(dev);
ram_addr_t kernel_size = 0;
if (!ipl->kernel) {
ram_addr_t bios_size = 0;
char *bios_filename;
/* Load zipl bootloader */
if (bios_name == NULL) {
bios_name = ipl->firmware;
}
bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
bios_size = load_elf(bios_filename, NULL, NULL, &ipl->start_addr, NULL,
NULL, 1, ELF_MACHINE, 0);
if (bios_size == -1UL) {
bios_size = load_image_targphys(bios_filename, ZIPL_IMAGE_START,
4096);
ipl->start_addr = ZIPL_IMAGE_START;
if (bios_size > 4096) {
hw_error("stage1 bootloader is > 4k\n");
}
}
g_free(bios_filename);
if ((long)bios_size < 0) {
hw_error("could not load bootloader '%s'\n", bios_name);
}
return 0;
} else {
kernel_size = load_elf(ipl->kernel, NULL, NULL, NULL, NULL,
NULL, 1, ELF_MACHINE, 0);
if (kernel_size == -1UL) {
kernel_size = load_image_targphys(ipl->kernel, 0, ram_size);
}
if (kernel_size == -1UL) {
fprintf(stderr, "could not load kernel '%s'\n", ipl->kernel);
return -1;
}
/* we have to overwrite values in the kernel image, which are "rom" */
strcpy(rom_ptr(KERN_PARM_AREA), ipl->cmdline);
/*
* we can not rely on the ELF entry point, since up to 3.2 this
* value was 0x800 (the SALIPL loader) and it wont work. For
* all (Linux) cases 0x10000 (KERN_IMAGE_START) should be fine.
*/
ipl->start_addr = KERN_IMAGE_START;
}
if (ipl->initrd) {
ram_addr_t initrd_offset, initrd_size;
initrd_offset = INITRD_START;
while (kernel_size + 0x100000 > initrd_offset) {
initrd_offset += 0x100000;
}
initrd_size = load_image_targphys(ipl->initrd, initrd_offset,
ram_size - initrd_offset);
if (initrd_size == -1UL) {
fprintf(stderr, "qemu: could not load initrd '%s'\n", ipl->initrd);
exit(1);
}
/* we have to overwrite values in the kernel image, which are "rom" */
stq_p(rom_ptr(INITRD_PARM_START), initrd_offset);
stq_p(rom_ptr(INITRD_PARM_SIZE), initrd_size);
}
return 0;
}
static int s390_ipl_init(SysBusDevice *dev)
{
S390IPLState *ipl = S390_IPL(dev);
int kernel_size;
if (!ipl->kernel) {
int bios_size;
char *bios_filename;
/* Load zipl bootloader */
if (bios_name == NULL) {
bios_name = ipl->firmware;
}
bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (bios_filename == NULL) {
hw_error("could not find stage1 bootloader\n");
}
bios_size = load_elf(bios_filename, NULL, NULL, &ipl->start_addr, NULL,
NULL, 1, ELF_MACHINE, 0);
if (bios_size < 0) {
bios_size = load_image_targphys(bios_filename, ZIPL_IMAGE_START,
4096);
ipl->start_addr = ZIPL_IMAGE_START;
if (bios_size > 4096) {
hw_error("stage1 bootloader is > 4k\n");
}
}
g_free(bios_filename);
if (bios_size == -1) {
hw_error("could not load bootloader '%s'\n", bios_name);
}
return 0;
} else {
uint64_t pentry = KERN_IMAGE_START;
kernel_size = load_elf(ipl->kernel, NULL, NULL, &pentry, NULL,
NULL, 1, ELF_MACHINE, 0);
if (kernel_size < 0) {
kernel_size = load_image_targphys(ipl->kernel, 0, ram_size);
}
if (kernel_size < 0) {
fprintf(stderr, "could not load kernel '%s'\n", ipl->kernel);
return -1;
}
/*
* Is it a Linux kernel (starting at 0x10000)? If yes, we fill in the
* kernel parameters here as well. Note: For old kernels (up to 3.2)
* we can not rely on the ELF entry point - it was 0x800 (the SALIPL
* loader) and it won't work. For this case we force it to 0x10000, too.
*/
if (pentry == KERN_IMAGE_START || pentry == 0x800) {
ipl->start_addr = KERN_IMAGE_START;
/* Overwrite parameters in the kernel image, which are "rom" */
strcpy(rom_ptr(KERN_PARM_AREA), ipl->cmdline);
} else {
ipl->start_addr = pentry;
}
}
if (ipl->initrd) {
ram_addr_t initrd_offset;
int initrd_size;
initrd_offset = INITRD_START;
while (kernel_size + 0x100000 > initrd_offset) {
initrd_offset += 0x100000;
}
initrd_size = load_image_targphys(ipl->initrd, initrd_offset,
ram_size - initrd_offset);
if (initrd_size == -1) {
fprintf(stderr, "qemu: could not load initrd '%s'\n", ipl->initrd);
exit(1);
}
/* we have to overwrite values in the kernel image, which are "rom" */
stq_p(rom_ptr(INITRD_PARM_START), initrd_offset);
stq_p(rom_ptr(INITRD_PARM_SIZE), initrd_size);
}
return 0;
}
