static void rt2x00usb_watchdog_tx_dma(struct data_queue *queue)
{
rt2x00_warn(queue->rt2x00dev, "TX queue %d DMA timed out, invoke forced forced reset\n",
queue->qid);
rt2x00queue_flush_queue(queue, true);
}
static inline bool rt2800usb_entry_txstatus_timeout(struct queue_entry *entry)
{
bool tout;
if (!test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
return false;
tout = time_after(jiffies, entry->last_action + msecs_to_jiffies(100));
if (unlikely(tout))
rt2x00_warn(entry->queue->rt2x00dev,
"TX status timeout for entry %d in queue %d\n",
entry->entry_idx, entry->queue->qid);
return tout;
}
static bool rt2x00usb_kick_tx_entry(struct queue_entry *entry, void *data)
{
struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
struct usb_device *usb_dev = to_usb_device_intf(rt2x00dev->dev);
struct queue_entry_priv_usb *entry_priv = entry->priv_data;
u32 length;
int status;
if (!test_and_clear_bit(ENTRY_DATA_PENDING, &entry->flags) ||
test_bit(ENTRY_DATA_STATUS_PENDING, &entry->flags))
return false;
/*
* USB devices require certain padding at the end of each frame
* and urb. Those paddings are not included in skbs. Pass entry
* to the driver to determine what the overall length should be.
*/
length = rt2x00dev->ops->lib->get_tx_data_len(entry);
status = skb_padto(entry->skb, length);
if (unlikely(status)) {
/* TODO: report something more appropriate than IO_FAILED. */
rt2x00_warn(rt2x00dev, "TX SKB padding error, out of memory\n");
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
rt2x00lib_dmadone(entry);
return false;
}
usb_fill_bulk_urb(entry_priv->urb, usb_dev,
usb_sndbulkpipe(usb_dev, entry->queue->usb_endpoint),
entry->skb->data, length,
rt2x00usb_interrupt_txdone, entry);
usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor);
status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC);
if (status) {
usb_unanchor_urb(entry_priv->urb);
if (status == -ENODEV)
clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags);
set_bit(ENTRY_DATA_IO_FAILED, &entry->flags);
rt2x00lib_dmadone(entry);
}
return false;
}
static void rt2800pci_txstatus_interrupt(struct rt2x00_dev *rt2x00dev)
{
u32 status;
int i;
/*
* The TX_FIFO_STATUS interrupt needs special care. We should
* read TX_STA_FIFO but we should do it immediately as otherwise
* the register can overflow and we would lose status reports.
*
* Hence, read the TX_STA_FIFO register and copy all tx status
* reports into a kernel FIFO which is handled in the txstatus
* tasklet. We use a tasklet to process the tx status reports
* because we can schedule the tasklet multiple times (when the
* interrupt fires again during tx status processing).
*
* Furthermore we don't disable the TX_FIFO_STATUS
* interrupt here but leave it enabled so that the TX_STA_FIFO
* can also be read while the tx status tasklet gets executed.
*
* Since we have only one producer and one consumer we don't
* need to lock the kfifo.
*/
for (i = 0; i < rt2x00dev->ops->tx->entry_num; i++) {
rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status);
if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID))
break;
if (!kfifo_put(&rt2x00dev->txstatus_fifo, &status)) {
rt2x00_warn(rt2x00dev, "TX status FIFO overrun, drop tx status report\n");
break;
}
}
/* Schedule the tasklet for processing the tx status. */
tasklet_schedule(&rt2x00dev->txstatus_tasklet);
}
static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
struct data_queue *queue,
struct sk_buff *frag_skb)
{
struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(frag_skb);
struct ieee80211_tx_info *rts_info;
struct sk_buff *skb;
unsigned int data_length;
int retval = 0;
if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
data_length = sizeof(struct ieee80211_cts);
else
data_length = sizeof(struct ieee80211_rts);
skb = dev_alloc_skb(data_length + rt2x00dev->hw->extra_tx_headroom);
if (unlikely(!skb)) {
rt2x00_warn(rt2x00dev, "Failed to create RTS/CTS frame\n");
return -ENOMEM;
}
skb_reserve(skb, rt2x00dev->hw->extra_tx_headroom);
skb_put(skb, data_length);
/*
* Copy TX information over from original frame to
* RTS/CTS frame. Note that we set the no encryption flag
* since we don't want this frame to be encrypted.
* RTS frames should be acked, while CTS-to-self frames
* should not. The ready for TX flag is cleared to prevent
* it being automatically send when the descriptor is
* written to the hardware.
*/
memcpy(skb->cb, frag_skb->cb, sizeof(skb->cb));
rts_info = IEEE80211_SKB_CB(skb);
rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_RTS_CTS;
rts_info->control.rates[0].flags &= ~IEEE80211_TX_RC_USE_CTS_PROTECT;
if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
rts_info->flags |= IEEE80211_TX_CTL_NO_ACK;
else
rts_info->flags &= ~IEEE80211_TX_CTL_NO_ACK;
/* Disable hardware encryption */
rts_info->control.hw_key = NULL;
/*
* RTS/CTS frame should use the length of the frame plus any
* encryption overhead that will be added by the hardware.
*/
data_length += rt2x00crypto_tx_overhead(rt2x00dev, skb);
if (tx_info->control.rates[0].flags & IEEE80211_TX_RC_USE_CTS_PROTECT)
ieee80211_ctstoself_get(rt2x00dev->hw, tx_info->control.vif,
frag_skb->data, data_length, tx_info,
(struct ieee80211_cts *)(skb->data));
else
ieee80211_rts_get(rt2x00dev->hw, tx_info->control.vif,
frag_skb->data, data_length, tx_info,
(struct ieee80211_rts *)(skb->data));
retval = rt2x00queue_write_tx_frame(queue, skb, NULL, true);
if (retval) {
dev_kfree_skb_any(skb);
rt2x00_warn(rt2x00dev, "Failed to send RTS/CTS frame\n");
}
return retval;
}
static bool rt2800pci_txdone(struct rt2x00_dev *rt2x00dev)
{
struct data_queue *queue;
u32 status;
u8 qid;
int max_tx_done = 16;
while (kfifo_get(&rt2x00dev->txstatus_fifo, &status)) {
qid = rt2x00_get_field32(status, TX_STA_FIFO_PID_QUEUE);
if (unlikely(qid >= QID_RX)) {
/*
* Unknown queue, this shouldn't happen. Just drop
* this tx status.
*/
rt2x00_warn(rt2x00dev, "Got TX status report with unexpected pid %u, dropping\n",
qid);
break;
}
queue = rt2x00queue_get_tx_queue(rt2x00dev, qid);
if (unlikely(queue == NULL)) {
/*
* The queue is NULL, this shouldn't happen. Stop
* processing here and drop the tx status
*/
rt2x00_warn(rt2x00dev, "Got TX status for an unavailable queue %u, dropping\n",
qid);
break;
}
if (unlikely(rt2x00queue_empty(queue))) {
/*
* The queue is empty. Stop processing here
* and drop the tx status.
*/
rt2x00_warn(rt2x00dev, "Got TX status for an empty queue %u, dropping\n",
qid);
break;
}
/*
* Let's associate this tx status with the first
* matching frame.
*/
if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
Q_INDEX, &status,
rt2800pci_txdone_find_entry)) {
/*
* We cannot match the tx status to any frame, so just
* use the first one.
*/
if (!rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
Q_INDEX, &status,
rt2800pci_txdone_match_first)) {
rt2x00_warn(rt2x00dev, "No frame found for TX status on queue %u, dropping\n",
qid);
break;
}
}
/*
* Release all frames with a valid tx status.
*/
rt2x00queue_for_each_entry(queue, Q_INDEX_DONE,
Q_INDEX, NULL,
rt2800pci_txdone_release_entries);
if (--max_tx_done == 0)
break;
}
return !max_tx_done;
}
