////////////////////////////////////////////////////////////////////////////////
// Program main
////////////////////////////////////////////////////////////////////////////////
int
main(int argc, char** argv)
{
if (cutCheckCmdLineFlag(argc, (const char **)argv, "qatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
g_bQAReadback = true;
g_bFBODisplay = false;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "glverify"))
{
g_bOpenGLQA = true;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "fbo"))
{
g_bFBODisplay = true;
}
if (g_bQAReadback) {
runAutoTest(argc, argv);
} else {
runGraphicsTest(argc, argv);
}
cutilExit(argc, argv);
}
////////////////////////////////////////////////////////////////////////////////
// Program main
////////////////////////////////////////////////////////////////////////////////
int
main(int argc, char **argv)
{
pArgc = &argc;
pArgv = argv;
// parse arguments
char *filename;
printf("Starting bicubicTexture\n");
if (checkCmdLineFlag(argc, (const char **) argv, "help"))
{
printHelp();
exit(EXIT_SUCCESS);
}
if (checkCmdLineFlag(argc, (const char **) argv, "mode"))
{
g_FilterMode = (eFilterMode)getCmdLineArgumentInt(argc, (const char **) argv, "mode");
if (g_FilterMode < MODE_NEAREST && g_FilterMode > MODE_CATMULL_ROM)
{
printf("Invalid Mode setting %d\n", g_FilterMode);
exit(EXIT_FAILURE);
}
}
if (getCmdLineArgumentString(argc, (const char **) argv, "file", &filename))
{
dumpFilename = filename;
fpsLimit = frameCheckNumber;
// Running CUDA kernel (bicubicFiltering) without visualization (QA Testing/Verification)
runAutoTest(argc, argv, (const char *)dumpFilename, g_FilterMode);
}
else
{
// This runs the CUDA kernel (bicubicFiltering) + OpenGL visualization
initialize(argc, argv);
glutMainLoop();
sdkDeleteTimer(&timer);
// cudaDeviceReset causes the driver to clean up all state. While
// not mandatory in normal operation, it is good practice. It is also
// needed to ensure correct operation when the application is being
// profiled. Calling cudaDeviceReset causes all profile data to be
// flushed before the application exits
cudaDeviceReset();
exit(EXIT_SUCCESS);
}
exit(EXIT_SUCCESS);
}
////////////////////////////////////////////////////////////////////////////////
// Program main
////////////////////////////////////////////////////////////////////////////////
int
main(int argc, char **argv)
{
pArgc = &argc;
pArgv = argv;
char *ref_file = NULL;
printf("%s Starting...\n\n", sSDKsample);
if (checkCmdLineFlag(argc, (const char **)argv, "file"))
{
fpsLimit = frameCheckNumber;
getCmdLineArgumentString(argc, (const char **)argv, "file", &ref_file);
}
if (ref_file)
{
chooseCudaDevice(argc, argv, false);
loadVolumeData(argv[0]);
runAutoTest(ref_file, argv[0]);
}
else
{
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL(&argc, argv);
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
chooseCudaDevice(argc, argv, true);
// OpenGL buffers
initGLBuffers();
loadVolumeData(argv[0]);
}
printf("Press space to toggle animation\n"
"Press '+' and '-' to change displayed slice\n");
#if defined (__APPLE__) || defined(MACOSX)
atexit(cleanup);
#else
glutCloseFunc(cleanup);
#endif
glutMainLoop();
exit(EXIT_SUCCESS);
}
////////////////////////////////////////////////////////////////////////////////
// Program main
////////////////////////////////////////////////////////////////////////////////
int
main(int argc, char **argv)
{
pArgc = &argc;
pArgv = argv;
// parse arguments
char *filename;
#if defined(__linux__)
setenv ("DISPLAY", ":0", 0);
#endif
printf("Starting bicubicTexture\n");
if (checkCmdLineFlag(argc, (const char **) argv, "help"))
{
printHelp();
exit(EXIT_SUCCESS);
}
if (checkCmdLineFlag(argc, (const char **) argv, "mode"))
{
g_FilterMode = (eFilterMode)getCmdLineArgumentInt(argc, (const char **) argv, "mode");
if (g_FilterMode < 0 || g_FilterMode >= NUM_MODES)
{
printf("Invalid Mode setting %d\n", g_FilterMode);
exit(EXIT_FAILURE);
}
}
if (getCmdLineArgumentString(argc, (const char **) argv, "file", &filename))
{
dumpFilename = filename;
fpsLimit = frameCheckNumber;
// Running CUDA kernel (bicubicFiltering) without visualization (QA Testing/Verification)
runAutoTest(argc, argv, (const char *)dumpFilename, g_FilterMode);
}
else
{
// This runs the CUDA kernel (bicubicFiltering) + OpenGL visualization
initialize(argc, argv);
glutMainLoop();
}
exit(EXIT_SUCCESS);
}
////////////////////////////////////////////////////////////////////////////////
// Program main
////////////////////////////////////////////////////////////////////////////////
int main(int argc, char** argv)
{
// check for command line arguments
if (argc > 1) {
if (cutCheckCmdLineFlag(argc, (const char **)argv, "qatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
g_bQAReadback = true;
animate = false;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "glverify")) {
g_bOpenGLQA = true;
animate = false;
fpsLimit = frameCheckNumber;
}
}
if (g_bQAReadback)
{
// Automated testing
runAutoTest(argc, argv);
}
else
{
printf("[%s]\n\n"
"Left mouse button - rotate\n"
"Middle mouse button - pan\n"
"Left + middle mouse button - zoom\n"
"'w' key - toggle wireframe\n", sSDKsample);
runGraphicsTest(argc, argv);
}
cutilExit(argc, argv);
}
int main(int argc, char **argv)
{
char *dump_file = NULL;
#if defined(__linux__)
setenv ("DISPLAY", ":0", 0);
#endif
pArgc = &argc;
pArgv = argv;
printf("%s Starting...\n\n", sSDKsample);
if (checkCmdLineFlag(argc, (const char **)argv, "file"))
{
getCmdLineArgumentString(argc, (const char **)argv,
"file", (char **) &dump_file);
int kernel = 1;
if (checkCmdLineFlag(argc, (const char **)argv, "kernel"))
{
kernel = getCmdLineArgumentInt(argc, (const char **)argv, "kernel");
}
runAutoTest(argc, argv, dump_file, kernel);
}
else
{
printf("[%s]\n", sSDKsample);
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
if (checkCmdLineFlag(argc, (const char **)argv, "device"))
{
printf("[%s]\n", argv[0]);
printf(" Does not explicitly support -device=n in OpenGL mode\n");
printf(" To use -device=n, the sample must be running w/o OpenGL\n\n");
printf(" > %s -device=n -qatest\n", argv[0]);
printf("exiting...\n");
exit(EXIT_SUCCESS);
}
// First load the image, so we know what the size of the image (imageW and imageH)
printf("Allocating host and CUDA memory and loading image file...\n");
const char *image_path = sdkFindFilePath("portrait_noise.bmp", argv[0]);
if (image_path == NULL)
{
printf("imageDenoisingGL was unable to find and load image file <portrait_noise.bmp>.\nExiting...\n");
exit(EXIT_FAILURE);
}
LoadBMPFile(&h_Src, &imageW, &imageH, image_path);
printf("Data init done.\n");
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL(&argc, argv);
cudaGLSetGLDevice(gpuGetMaxGflopsDeviceId());
checkCudaErrors(CUDA_MallocArray(&h_Src, imageW, imageH));
initOpenGLBuffers();
}
printf("Starting GLUT main loop...\n");
printf("Press [1] to view noisy image\n");
printf("Press [2] to view image restored with knn filter\n");
printf("Press [3] to view image restored with nlm filter\n");
printf("Press [4] to view image restored with modified nlm filter\n");
printf("Press [*] to view smooth/edgy areas [RED/BLUE] Ct's when a filter is active\n");
printf("Press [f] to print frame rate\n");
printf("Press [?] to print Noise and Lerp Ct's\n");
printf("Press [q] to exit\n");
sdkCreateTimer(&timer);
sdkStartTimer(&timer);
glutMainLoop();
}
int main(int argc, char** argv)
{
printf("[%s]\n", sSDKsample);
if (argc > 1) {
if (cutCheckCmdLineFlag(argc, (const char **)argv, "help")) {
printHelp();
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "qatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
g_bQAReadback = true;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "glverify"))
{
g_bOpenGLQA = true;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "fbo")) {
g_bFBODisplay = true;
fpsLimit = frameCheckNumber;
}
}
if (g_bQAReadback)
{
runAutoTest(argc, argv);
}
else
{
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL( &argc, argv );
// use command-line specified CUDA device if possible, otherwise search for capable device
if( cutCheckCmdLineFlag(argc, (const char**)argv, "device") ) {
cutilGLDeviceInit(argc, argv);
int device;
cudaGetDevice( &device );
if( checkCUDAProfile( device ) == false ) {
cudaThreadExit();
cutilExit(argc, argv);
}
} else {
//cudaGLSetGLDevice (cutGetMaxGflopsDeviceId() );
int dev = findCapableDevice(argc, argv);
if( dev != -1 )
cudaGLSetGLDevice( dev );
else {
cudaThreadExit();
cutilExit(argc, argv);
}
}
cutilCheckError(cutCreateTimer(&timer));
cutilCheckError(cutResetTimer(timer));
glutDisplayFunc(display);
glutKeyboardFunc(keyboard);
glutReshapeFunc(reshape);
glutIdleFunc(idle);
if (g_bOpenGLQA) {
loadDefaultImage( argc, argv );
}
if (argc > 1) {
char *filename;
if (cutGetCmdLineArgumentstr(argc, (const char **)argv, "file", &filename)) {
initializeData(filename, argc, argv);
}
} else {
loadDefaultImage( argc, argv );
}
// If code is not printing the USage, then we execute this path.
if (!bQuit) {
if (g_bOpenGLQA) {
g_CheckRender = new CheckBackBuffer(wWidth, wHeight, 4);
g_CheckRender->setPixelFormat(GL_BGRA);
g_CheckRender->setExecPath(argv[0]);
g_CheckRender->EnableQAReadback(true);
}
printf("I: display image\n");
printf("T: display Sobel edge detection (computed with tex)\n");
printf("S: display Sobel edge detection (computed with tex+shared memory)\n");
printf("Use the '-' and '=' keys to change the brightness.\n");
printf("b: switch block filter operation (mean/Sobel)\n");
printf("p: swtich point filter operation (threshold on/off)\n");
fflush(stdout);
atexit(cleanup);
glutMainLoop();
}
}
cudaThreadExit();
cutilExit(argc, argv);
}
////////////////////////////////////////////////////////////////////////////////
// Program main
////////////////////////////////////////////////////////////////////////////////
int
main( int argc, char** argv)
{
pArgc = &argc;
pArgv = argv;
shrQAStart(argc, argv);
// start logs
shrSetLogFileName ("boxFilter.txt");
shrLog("%s Starting...\n\n", argv[0]);
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
if (argc > 1) {
cutGetCmdLineArgumenti( argc, (const char**) argv, "threads", &nthreads );
cutGetCmdLineArgumenti( argc, (const char**) argv, "radius", &filter_radius);
if (cutCheckCmdLineFlag(argc, (const char **)argv, "glverify"))
{
g_bOpenGLQA = true;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "fbo")) {
g_bFBODisplay = true;
}
}
// load image to process
loadImageData(argc, argv);
if (cutCheckCmdLineFlag(argc, (const char **)argv, "qatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
// Running CUDA kernel (boxFilter) without visualization (QA Testing/Verification)
runAutoTest(argc, argv);
shrQAFinishExit(argc, (const char **)argv, (g_TotalErrors == 0 ? QA_PASSED : QA_FAILED));
}
else if (cutCheckCmdLineFlag(argc, (const char **)argv, "benchmark"))
{
// Running CUDA kernels (boxfilter) in Benchmarking mode
runBenchmark(argc, argv);
shrQAFinishExit(argc, (const char **)argv, (g_TotalErrors == 0 ? QA_PASSED : QA_FAILED));
}
else
{
// Running CUDA kernels (boxFilter) with OpenGL visualization
if (g_bFBODisplay) shrLog("[FBO Display] ");
if (g_bOpenGLQA) shrLog("[OpenGL Readback Comparisons] ");
shrLog("\n");
if ( cutCheckCmdLineFlag(argc, (const char **)argv, "device")) {
printf(" This SDK does not explicitly support -device=n when running with OpenGL.\n");
printf(" When specifying -device=n (n=0,1,2,....) the sample must not use OpenGL.\n");
printf(" See details below to run without OpenGL:\n\n");
printf(" > %s -device=n -qatest\n\n", argv[0]);
printf("exiting...\n");
shrQAFinishExit(argc, (const char **)argv, QA_WAIVED);
}
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL( &argc, argv );
int dev = findCapableDevice(argc, argv);
if( dev != -1 ) {
cudaGLSetGLDevice( dev );
} else {
cutilDeviceReset();
shrQAFinishExit(argc, (const char **)argv, QA_WAIVED);
}
// Now we can create a CUDA context and bind it to the OpenGL context
initCuda();
initGLResources();
if (g_bOpenGLQA) {
if (g_bFBODisplay) {
g_CheckRender = new CheckFBO(width, height, 4, g_FrameBufferObject);
} else {
g_CheckRender = new CheckBackBuffer(width, height, 4);
}
g_CheckRender->setPixelFormat(GL_RGBA);
g_CheckRender->setExecPath(argv[0]);
g_CheckRender->EnableQAReadback(true);
}
}
// sets the callback function so it will call cleanup upon exit
atexit(cleanup);
shrLog("Running Standard Demonstration with GLUT loop...\n\n");
shrLog("Press '+' and '-' to change filter width\n"
"Press ']' and '[' to change number of iterations\n\n");
// Main OpenGL loop that will run visualization for every vsync
glutMainLoop();
cutilDeviceReset();
shrQAFinishExit(argc, (const char **)argv, (g_TotalErrors == 0 ? QA_PASSED : QA_FAILED));
}
int main(int argc, char **argv)
{
pArgc = &argc;
pArgv = argv;
#if defined(__linux__)
setenv ("DISPLAY", ":0", 0);
#endif
printf("%s Starting...\n\n", sSDKsample);
if (checkCmdLineFlag(argc, (const char **)argv, "help"))
{
printf("\nUsage: SobelFilter <options>\n");
printf("\t\t-mode=n (0=original, 1=texture, 2=smem + texture)\n");
printf("\t\t-file=ref_orig.pgm (ref_tex.pgm, ref_shared.pgm)\n\n");
exit(EXIT_SUCCESS);
}
if (checkCmdLineFlag(argc, (const char **)argv, "file"))
{
g_bQAReadback = true;
runAutoTest(argc, argv);
}
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
if (checkCmdLineFlag(argc, (const char **)argv, "device"))
{
printf(" This SDK does not explicitly support -device=n when running with OpenGL.\n");
printf(" When specifying -device=n (n=0,1,2,....) the sample must not use OpenGL.\n");
printf(" See details below to run without OpenGL:\n\n");
printf(" > %s -device=n\n\n", argv[0]);
printf("exiting...\n");
exit(EXIT_SUCCESS);
}
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL(&argc, argv);
cudaGLSetGLDevice(gpuGetMaxGflopsDeviceId());
sdkCreateTimer(&timer);
sdkResetTimer(&timer);
glutDisplayFunc(display);
glutKeyboardFunc(keyboard);
glutReshapeFunc(reshape);
loadDefaultImage(argv[0]);
// If code is not printing the USage, then we execute this path.
printf("I: display Image (no filtering)\n");
printf("T: display Sobel Edge Detection (Using Texture)\n");
printf("S: display Sobel Edge Detection (Using SMEM+Texture)\n");
printf("Use the '-' and '=' keys to change the brightness.\n");
fflush(stdout);
#if defined (__APPLE__) || defined(MACOSX)
atexit(cleanup);
#else
glutCloseFunc(cleanup);
#endif
glutTimerFunc(REFRESH_DELAY, timerEvent,0);
glutMainLoop();
}
////////////////////////////////////////////////////////////////////////////////
// Program main
////////////////////////////////////////////////////////////////////////////////
int main( int argc, char** argv)
{
shrQAStart(argc, argv);
// start logs
shrSetLogFileName ("bilateralFilter.txt");
shrLog("%s Starting...\n\n", argv[0]);
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
cutGetCmdLineArgumenti( argc, (const char**) argv, "threads", &nthreads );
cutGetCmdLineArgumenti( argc, (const char**) argv, "radius", &filter_radius);
// load image to process
loadImageData(argc, argv);
if (cutCheckCmdLineFlag(argc, (const char **)argv, "qatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
// Running CUDA kernel (bilateralFilter) without visualization (QA Testing/Verification)
runAutoTest(argc, argv);
shrQAFinishExit(argc, (const char **)argv, (g_TotalErrors == 0 ? QA_PASSED : QA_FAILED));
}
else if (cutCheckCmdLineFlag(argc, (const char **)argv, "benchmark"))
{
// Running CUDA kernel (bilateralFilter) in Benchmarking Mode
runBenchmark(argc, argv);
shrQAFinishExit(argc, (const char **)argv, (g_TotalErrors == 0 ? QA_PASSED : QA_FAILED));
}
else
{
// Running CUDA kernel (bilateralFilter) in CUDA + OpenGL Visualization Mode
if ( cutCheckCmdLineFlag(argc, (const char **)argv, "device")) {
printf("[%s]\n", argv[0]);
printf(" Does not explicitly support -device=n in OpenGL mode\n");
printf(" To use -device=n, the sample must be running w/o OpenGL\n\n");
printf(" > %s -device=n -qatest\n", argv[0]);
printf("exiting...\n");
exit(0);
}
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL( argc, argv );
if ( cutCheckCmdLineFlag(argc, (const char **)argv, "device")) {
cutilGLDeviceInit(argc, argv);
} else {
cudaGLSetGLDevice (cutGetMaxGflopsDeviceId() );
}
initCuda();
initOpenGL();
}
atexit(cleanup);
printf("Running Standard Demonstration with GLUT loop...\n\n");
printf("Press '+' and '-' to change number of iterations\n"
"Press LEFT and RIGHT change euclidean delta\n"
"Press UP and DOWN to change gaussian delta\n"
"Press '1' to show original image\n"
"Press '2' to show result\n\n");
glutMainLoop();
cutilDeviceReset();
shrQAFinishExit(argc, (const char **)argv, (g_TotalErrors == 0 ? QA_PASSED : QA_FAILED));
}
int main(int argc, char** argv)
{
pArgc = &argc;
pArgv = argv;
shrQAStart(argc, argv);
if (argc > 1) {
if (cutCheckCmdLineFlag(argc, (const char **)argv, "help")) {
printHelp();
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "qatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
g_bQAReadback = true;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "glverify"))
{
g_bOpenGLQA = true;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "fbo")) {
g_bFBODisplay = true;
fpsLimit = frameCheckNumber;
}
}
if (g_bQAReadback)
{
runAutoTest(argc, argv);
}
else
{
if ( cutCheckCmdLineFlag(argc, (const char **)argv, "device")) {
printf(" This SDK does not explicitly support -device=n when running with OpenGL.\n");
printf(" When specifying -device=n (n=0,1,2,....) the sample must not use OpenGL.\n");
printf(" See details below to run without OpenGL:\n\n");
printf(" > %s -device=n -qatest\n\n", argv[0]);
printf("exiting...\n");
shrQAFinishExit(argc, (const char **)argv, QA_PASSED);
}
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL( &argc, argv );
//cudaGLSetGLDevice (cutGetMaxGflopsDeviceId() );
int dev = findCapableDevice(argc, argv);
if( dev != -1 ) {
cudaGLSetGLDevice( dev );
} else {
shrQAFinishExit2(g_bQAReadback, *pArgc, (const char **)pArgv, QA_PASSED);
}
cutilCheckError(cutCreateTimer(&timer));
cutilCheckError(cutResetTimer(timer));
glutDisplayFunc(display);
glutKeyboardFunc(keyboard);
glutReshapeFunc(reshape);
if (g_bOpenGLQA) {
loadDefaultImage( argc, argv );
}
if (argc > 1) {
char *filename;
if (cutGetCmdLineArgumentstr(argc, (const char **)argv, "file", &filename)) {
initializeData(filename, argc, argv);
}
} else {
loadDefaultImage( argc, argv );
}
// If code is not printing the USage, then we execute this path.
if (!bQuit) {
if (g_bOpenGLQA) {
g_CheckRender = new CheckBackBuffer(wWidth, wHeight, 4);
g_CheckRender->setPixelFormat(GL_BGRA);
g_CheckRender->setExecPath(argv[0]);
g_CheckRender->EnableQAReadback(true);
}
printf("I: display Image (no filtering)\n");
printf("T: display Sobel Edge Detection (Using Texture)\n");
printf("S: display Sobel Edge Detection (Using SMEM+Texture)\n");
printf("Use the '-' and '=' keys to change the brightness.\n");
printf("b: switch block filter operation (mean/Sobel)\n");
printf("p: switch point filter operation (threshold on/off)\n");
fflush(stdout);
atexit(cleanup);
glutTimerFunc(REFRESH_DELAY, timerEvent,0);
glutMainLoop();
}
}
cutilDeviceReset();
shrQAFinishExit(argc, (const char **)argv, QA_PASSED);
}
int main()
{
int Status;
init_platform();
xil_printf("NetFPGA-SUME ddr3B Acceptance Test\r\n");
/*
* Setup Iic Instance
*/
Status = IicInit(&IicInstance);
if (Status != XST_SUCCESS) {
xil_printf("I2C Initialization FAILED\n\r");
return XST_FAILURE;
}
/*
* Setup the Interrupt System.
*/
Status = SetupInterruptSystem(&IicInstance);
if (Status != XST_SUCCESS) {
xil_printf("SetupInterruptSystem FAILED\n\r");
return XST_FAILURE;
}
/*
* Enable Iic Bus
*/
Status = IicInitPost(&IicInstance);
if (Status != XST_SUCCESS) {
xil_printf("I2C Initialization FAILED\n\r");
return XST_FAILURE;
}
Status = ddr3Test_Init();
if (Status != XST_SUCCESS) {
xil_printf("I2C Initialization FAILED\n\r");
return XST_FAILURE;
}
while(1) {
xil_printf("============ NetFPGA-SUME ============\n\r");
xil_printf("a: Auto Test \r\n");
xil_printf("m: Manual Test \r\n");
xil_printf("Select: ");
char cmd = XUartLite_RecvByte(XPAR_AXI_UARTLITE_0_BASEADDR);
xil_printf("%c\r\n", cmd);
switch (cmd) {
case 'a':
runAutoTest();
break;
case 'm':
runManualTest();
break;
default:
break;
}
xil_printf("\r\n");
}
return 0;
}
int main(int argc, char **argv)
{
pArgc = &argc;
pArgv = argv;
printf("%s Starting...\n\n", argv[0]);
if (checkCmdLineFlag(argc, (const char **)argv, "help"))
{
printf("\nUsage: FunctionPointers (SobelFilter) <options>\n");
printf("\t\t-mode=n (0=original, 1=texture, 2=smem + texture)\n");
printf("\t\t-file=ref_orig.pgm (ref_tex.pgm, ref_shared.pgm)\n\n");
exit(EXIT_WAIVED);
}
if (checkCmdLineFlag(argc, (const char **)argv, "file"))
{
g_bQAReadback = true;
runAutoTest(argc, argv);
}
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
if (checkCmdLineFlag(argc, (const char **)argv, "device"))
{
printf(" This SDK does not explicitly support -device=n when running with OpenGL.\n");
printf(" When specifying -device=n (n=0,1,2,....) the sample must not use OpenGL.\n");
printf(" See details below to run without OpenGL:\n\n");
printf(" > %s -device=n\n\n", argv[0]);
printf("exiting...\n");
exit(EXIT_WAIVED);
}
if (!g_bQAReadback)
{
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL(&argc, argv);
int dev = findCapableDevice(argc, argv);
checkDeviceMeetComputeSpec(argc, argv);
if (dev != -1)
{
cudaGLSetGLDevice(dev);
}
else
{
exit(EXIT_WAIVED);
}
sdkCreateTimer(&timer);
sdkResetTimer(&timer);
glutDisplayFunc(display);
glutKeyboardFunc(keyboard);
glutReshapeFunc(reshape);
loadDefaultImage(argv[0]);
// If code is not printing the USage, then we execute this path.
printf("I: display Image (no filtering)\n");
printf("T: display Sobel Edge Detection (Using Texture)\n");
printf("S: display Sobel Edge Detection (Using SMEM+Texture)\n");
printf("Use the '-' and '=' keys to change the brightness.\n");
printf("b: switch block filter operation (Mean/Sobel)\n");
printf("p: switch point filter operation (Threshold ON/OFF)\n");
fflush(stdout);
atexit(cleanup);
glutTimerFunc(REFRESH_DELAY, timerEvent,0);
glutMainLoop();
}
cudaDeviceReset();
exit(EXIT_SUCCESS);
}
int main(int argc, char** argv)
{
// EDISON //////////////////////////////////////////////////////////////////
sigmaS = 7.0f;
sigmaR = 6.5f;
edison.minRegion = 20.0f;
cutLoadPPMub("image.ppm", &edison.inputImage_, &width, &height);
edison.meanShift();
cutSavePPMub("segmimage.ppm", edison.segmImage_, width, height);
cutSavePPMub("filtimage.ppm", edison.filtImage_, width, height);
unsigned char data[height * width];
memset(data, 0, height * width * sizeof(unsigned char));
for(int i = 0; i < edison.numBoundaries_; i++) {
data[edison.boundaries_[i]] = 255;
}
cutSavePGMub("bndyimage.pgm", data, width, height);
//return 0;
// EDISON //////////////////////////////////////////////////////////////////
if (argc > 1) {
if (cutCheckCmdLineFlag(argc, (const char **)argv, "help")) {
printHelp();
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "qatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
g_bQAReadback = true;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "glverify"))
{
g_bOpenGLQA = true;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "fbo")) {
g_bFBODisplay = true;
fpsLimit = frameCheckNumber;
}
}
if (g_bQAReadback) {
runAutoTest(argc, argv);
} else {
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL( argc, argv );
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
if( cutCheckCmdLineFlag(argc, (const char**)argv, "device") ) {
cutilGLDeviceInit(argc, argv);
} else {
cudaGLSetGLDevice (cutGetMaxGflopsDeviceId() );
}
int device;
struct cudaDeviceProp prop;
cudaGetDevice( &device );
cudaGetDeviceProperties( &prop, device );
if(!strncmp( "Tesla", prop.name, 5 )) {
printf("This sample needs a card capable of OpenGL and display.\n");
printf("Please choose a different device with the -device=x argument.\n");
cudaThreadExit();
cutilExit(argc, argv);
}
cutilCheckError(cutCreateTimer(&timer));
cutilCheckError(cutResetTimer(timer));
glutDisplayFunc(display);
glutKeyboardFunc(keyboard);
glutReshapeFunc(reshape);
glutIdleFunc(idle);
if (g_bOpenGLQA) {
loadDefaultImage( argv[0] );
}
if (argc > 1) {
char *filename;
if (cutGetCmdLineArgumentstr(argc, (const char **)argv, "file", &filename)) {
initializeData(filename);
}
} else {
loadDefaultImage( argv[0]);
}
// If code is not printing the USage, then we execute this path.
if (!bQuit) {
if (g_bOpenGLQA) {
g_CheckRender = new CheckBackBuffer(wWidth, wHeight, 4);
g_CheckRender->setPixelFormat(GL_BGRA);
g_CheckRender->setExecPath(argv[0]);
g_CheckRender->EnableQAReadback(true);
}
printf("I: display image\n");
printf("T: display Sobel edge detection (computed with tex)\n");
printf("S: display Sobel edge detection (computed with tex+shared memory)\n");
printf("Use the '-' and '=' keys to change the brightness.\n");
fflush(stdout);
atexit(cleanup);
glutMainLoop();
}
}
cudaThreadExit();
cutilExit(argc, argv);
}
int main(int argc, char **argv)
{
shrQAStart(argc, argv);
if (argc > 1) {
if (cutCheckCmdLineFlag(argc, (const char **)argv, "qatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
g_bQAReadback = true;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "glverify"))
{
g_bOpenGLQA = true;
g_bFBODisplay = false;
fpsLimit = frameCheckNumber;
}
if (cutCheckCmdLineFlag(argc, (const char **)argv, "fbo")) {
g_bFBODisplay = true;
fpsLimit = frameCheckNumber;
}
}
if (g_bQAReadback) {
runAutoTest(argc, argv);
} else {
printf("[%s] ", sSDKsample);
if (g_bFBODisplay) printf("[FBO Display] ");
if (g_bOpenGLQA) printf("[OpenGL Readback Comparisons] ");
printf("\n");
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
if ( cutCheckCmdLineFlag(argc, (const char **)argv, "device")) {
printf("[%s]\n", argv[0]);
printf(" Does not explicitly support -device=n in OpenGL mode\n");
printf(" To use -device=n, the sample must be running w/o OpenGL\n\n");
printf(" > %s -device=n -qatest\n", argv[0]);
printf("exiting...\n");
exit(0);
}
// First load the image, so we know what the size of the image (imageW and imageH)
printf("Allocating host and CUDA memory and loading image file...\n");
const char *image_path = cutFindFilePath("portrait_noise.bmp", argv[0]);
if (image_path == NULL) {
printf( "imageDenoisingGL was unable to find and load image file <portrait_noise.bmp>.\nExiting...\n");
shrQAFinishExit(argc, (const char **)argv, QA_FAILED);
}
LoadBMPFile(&h_Src, &imageW, &imageH, image_path);
printf("Data init done.\n");
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL( &argc, argv );
cudaGLSetGLDevice( cutGetMaxGflopsDeviceId() );
cutilSafeCall( CUDA_MallocArray(&h_Src, imageW, imageH) );
initOpenGLBuffers();
// Creating the Auto-Validation Code
if (g_bOpenGLQA) {
if (g_bFBODisplay) {
g_CheckRender = new CheckFBO(imageW, imageH, 4);
} else {
g_CheckRender = new CheckBackBuffer(imageW, imageH, 4);
}
g_CheckRender->setPixelFormat(GL_RGBA);
g_CheckRender->setExecPath(argv[0]);
g_CheckRender->EnableQAReadback(g_bOpenGLQA);
}
}
printf("Starting GLUT main loop...\n");
printf("Press [1] to view noisy image\n");
printf("Press [2] to view image restored with knn filter\n");
printf("Press [3] to view image restored with nlm filter\n");
printf("Press [4] to view image restored with modified nlm filter\n");
printf("Press [ ] to view smooth/edgy areas [RED/BLUE] Ct's\n");
printf("Press [f] to print frame rate\n");
printf("Press [?] to print Noise and Lerp Ct's\n");
printf("Press [q] to exit\n");
glutDisplayFunc(displayFunc);
glutKeyboardFunc(shutDown);
cutilCheckError( cutCreateTimer(&hTimer) );
cutilCheckError( cutStartTimer(hTimer) );
glutTimerFunc(REFRESH_DELAY, timerEvent,0);
glutMainLoop();
cutilDeviceReset();
shrQAFinishExit(argc, (const char **)argv, QA_PASSED);
}
////////////////////////////////////////////////////////////////////////////////
// Program main
////////////////////////////////////////////////////////////////////////////////
int
main( int argc, char** argv)
{
// use command-line specified CUDA device, otherwise use device with highest Gflops/s
if (!cutCheckCmdLineFlag(argc, (const char **)argv, "noqatest") ||
cutCheckCmdLineFlag(argc, (const char **)argv, "noprompt"))
{
g_bQAReadback = true;
fpsLimit = frameCheckNumber;
}
if (argc > 1) {
if (cutCheckCmdLineFlag(argc, (const char **)argv, "glverify")) {
g_bOpenGLQA = true;
fpsLimit = frameCheckNumber;
}
}
printf("[%s] ", sSDKsample);
if (g_bQAReadback) printf("(Automated Testing)\n");
if (g_bOpenGLQA) printf("(OpenGL Readback)\n");
// Get the path of the filename
char *filename;
if (cutGetCmdLineArgumentstr(argc, (const char**) argv, "image", &filename)) {
image_filename = filename;
}
// load image
char* image_path = cutFindFilePath(image_filename, argv[0]);
if (image_path == 0) {
fprintf(stderr, "Error finding image file '%s'\n", image_filename);
cudaThreadExit();
exit(EXIT_FAILURE);
}
cutilCheckError( cutLoadPPM4ub(image_path, (unsigned char **) &h_img, &width, &height));
if (!h_img) {
printf("Error opening file '%s'\n", image_path);
cudaThreadExit();
exit(-1);
}
printf("Loaded '%s', %d x %d pixels\n", image_path, width, height);
cutGetCmdLineArgumenti(argc, (const char**) argv, "threads", &nthreads);
cutGetCmdLineArgumentf(argc, (const char**) argv, "sigma", &sigma);
runBenchmark = cutCheckCmdLineFlag(argc, (const char**) argv, "bench");
int device;
struct cudaDeviceProp prop;
cudaGetDevice( &device );
cudaGetDeviceProperties( &prop, device );
if( !strncmp( "Tesla", prop.name, 5 ) ) {
printf("Tesla card detected, running the test in benchmark mode (no OpenGL display)\n");
// runBenchmark = CUTTrue;
g_bQAReadback = true;
}
// Benchmark or AutoTest mode detected, no OpenGL
if (runBenchmark == CUTTrue || g_bQAReadback) {
if( cutCheckCmdLineFlag( argc, (const char **)argv, "device" ) )
cutilDeviceInit( argc, argv );
else
cudaSetDevice( cutGetMaxGflopsDeviceId() );
} else {
// First initialize OpenGL context, so we can properly set the GL for CUDA.
// This is necessary in order to achieve optimal performance with OpenGL/CUDA interop.
initGL(argc, argv);
if( cutCheckCmdLineFlag( argc, (const char **)argv, "device" ) )
cutilGLDeviceInit( argc, argv );
else
cudaGLSetGLDevice( cutGetMaxGflopsDeviceId() );
}
initCudaBuffers();
if (g_bOpenGLQA) {
g_CheckRender = new CheckBackBuffer(width, height, 4);
g_CheckRender->setPixelFormat(GL_RGBA);
g_CheckRender->setExecPath(argv[0]);
g_CheckRender->EnableQAReadback(true);
}
if (g_bQAReadback) {
// This is the automated testing path
g_CheckRender = new CheckBackBuffer(width, height, 4, false);
g_CheckRender->setPixelFormat(GL_RGBA);
g_CheckRender->setExecPath(argv[0]);
g_CheckRender->EnableQAReadback(true);
runAutoTest(argc, argv);
cleanup();
cudaThreadExit();
cutilExit(argc, argv);
}
if (runBenchmark) {
benchmark(100);
cleanup();
cudaThreadExit();
exit(0);
}
initGLBuffers();
atexit(cleanup);
glutMainLoop();
cudaThreadExit();
cutilExit(argc, argv);
}