C++ (Cpp) s5p_i2c_hdmiphy_set_platdata 예제들

예제 #1

파일: mach-origen.c 프로젝트: Jackeagle/android_kernel_sony_c2305

static void __init origen_machine_init(void)
{
	origen_power_init();

	s3c_i2c0_set_platdata(NULL);
	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));

	/*
	 * Since sdhci instance 2 can contain a bootable media,
	 * sdhci instance 0 is registered after instance 2.
	 */
	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);

	origen_ehci_init();
	origen_ohci_init();
	clk_xusbxti.rate = 24000000;

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);

	s5p_fimd0_set_platdata(&origen_lcd_pdata);

	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));

	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);

	origen_bt_setup();
}

예제 #2

파일: mach-universal_c210.c 프로젝트: Afek/linux

static void __init universal_machine_init(void)
{
	universal_sdhci_init();
	s5p_tv_setup();

	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));

	universal_tsp_init();
	s3c_i2c3_set_platdata(NULL);
	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));

	s3c_i2c5_set_platdata(NULL);
	s5p_i2c_hdmiphy_set_platdata(NULL);
	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));

#ifdef CONFIG_DRM_EXYNOS
	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
	exynos4_fimd0_gpio_setup_24bpp();
#else
	s5p_fimd0_set_platdata(&universal_lcd_pdata);
#endif

	universal_touchkey_init();
	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
			ARRAY_SIZE(i2c_gpio12_devs));

	s3c_hsotg_set_platdata(&universal_hsotg_pdata);
	universal_camera_init();

	/* Last */
	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}

예제 #3

파일: mach-universal_c210.c 프로젝트: dana/linux

static void __init universal_machine_init(void)
{
	universal_sdhci_init();
	s5p_tv_setup();

	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));

	universal_tsp_init();
	s3c_i2c3_set_platdata(NULL);
	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));

	s3c_i2c5_set_platdata(NULL);
	s5p_i2c_hdmiphy_set_platdata(NULL);
	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));

	s5p_fimd0_set_platdata(&universal_lcd_pdata);

	universal_touchkey_init();
	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
			ARRAY_SIZE(i2c_gpio12_devs));

	universal_camera_init();

	/* Last */
	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}

예제 #4

파일: mach-smdkv310.c 프로젝트: 250bpm/linux

static void __init smdkv310_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkv310_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);

	samsung_keypad_set_platdata(&smdkv310_keypad_data);

	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
#ifdef CONFIG_DRM_EXYNOS
	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
	exynos4_fimd0_gpio_setup_24bpp();
#else
	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
#endif

	smdkv310_ehci_init();
	smdkv310_ohci_init();
	clk_xusbxti.rate = 24000000;

	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}

예제 #5

파일: mach-smdkv310.c 프로젝트: DamonDeng/linux

static void __init smdkv310_machine_init(void)
{
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	smdkv310_smsc911x_init();

	s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
	s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
	s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);

	samsung_keypad_set_platdata(&smdkv310_keypad_data);

	samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);

	smdkv310_ehci_init();
	smdkv310_ohci_init();
	clk_xusbxti.rate = 24000000;

	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
}

예제 #6

파일: board-manta-display.c 프로젝트: Khaon/android_kernel_samsung_manta

void __init exynos5_manta_display_init(void)
{
	struct resource *res;

	/* LCD_EN , XMMC2CDN => GPC2_2 */
	gpio_request_one(GPIO_LCD_EN, GPIOF_OUT_INIT_LOW, "LCD_EN");
	/* LED_BACKLIGHT_RESET: XCI1RGB_5 => GPG0_5 */
	gpio_request_one(GPIO_LED_BL_RST, GPIOF_OUT_INIT_LOW, "LED_BL_RST");
	s5p_gpio_set_pd_cfg(GPIO_LED_BL_RST, S5P_GPIO_PD_PREV_STATE);
	s5p_gpio_set_pd_pull(GPIO_LED_BL_RST, S5P_GPIO_PD_UPDOWN_DISABLE);

	gpio_request_one(GPIO_LCD_PWM_IN_18V, GPIOF_OUT_INIT_LOW, "PWM_IN_18V");
	s5p_gpio_set_pd_cfg(GPIO_LCD_PWM_IN_18V, S5P_GPIO_PD_INPUT);
	s5p_gpio_set_pd_pull(GPIO_LCD_PWM_IN_18V, S5P_GPIO_PD_UP_ENABLE);
	gpio_free(GPIO_LCD_PWM_IN_18V);

	gpio_request_one(GPIO_APS_EN_18V, GPIOF_OUT_INIT_LOW, "APS_EN_18V");
	s5p_gpio_set_pd_cfg(GPIO_APS_EN_18V, S5P_GPIO_PD_INPUT);
	s5p_gpio_set_pd_pull(GPIO_APS_EN_18V, S5P_GPIO_PD_UP_ENABLE);
	gpio_export(GPIO_APS_EN_18V, true);

	samsung_bl_set(&manta_bl_gpio_info, &manta_bl_data);
	s5p_fimd1_set_platdata(&manta_lcd1_pdata);
	dev_set_name(&s5p_device_fimd1.dev, "exynos5-fb.1");
	clk_add_alias("lcd", "exynos5-fb.1", "fimd", &s5p_device_fimd1.dev);
	s5p_dp_set_platdata(&manta_dp_data);

	gpio_request_one(GPIO_HDMI_HPD, GPIOF_IN, "HDMI_HPD");
	/* HDMI Companion DC/DC converter and HPD circuitry */
	gpio_request_one(GPIO_HDMI_DCDC_EN, GPIOF_OUT_INIT_HIGH, "HDMI_DCDC_EN");
	/* HDMI Companion level shifters and LDO */
	gpio_request_one(GPIO_HDMI_LS_EN, GPIOF_OUT_INIT_HIGH, "HDMI_LS_EN");

	s5p_hdmi_set_platdata(&hdmi_platdata);
	dev_set_name(&s5p_device_hdmi.dev, "exynos5-hdmi");
	clk_add_alias("hdmi", "s5p-hdmi", "hdmi", &s5p_device_hdmi.dev);
	platform_set_sysmmu(&SYSMMU_PLATDEV(tv).dev, &s5p_device_mixer.dev);
	s5p_i2c_hdmiphy_set_platdata(NULL);

	platform_add_devices(manta_display_devices,
			     ARRAY_SIZE(manta_display_devices));

	exynos5_fimd1_setup_clock(&s5p_device_fimd1.dev,
				"sclk_fimd", "sclk_vpll", 268 * MHZ);

	res = platform_get_resource(&s5p_device_fimd1, IORESOURCE_MEM, 1);
	if (res) {
		res->start = manta_bootloader_fb_start;
		res->end = res->start + manta_bootloader_fb_size - 1;
		pr_info("bootloader fb located at %8X-%8X\n", res->start,
				res->end);
	} else {
		pr_err("failed to find bootloader fb resource\n");
	}
}

예제 #7

파일: mach-origen.c 프로젝트: 0x000000FF/Linux4Edison

static void __init origen_machine_init(void)
{
	origen_power_init();

	s3c_i2c0_set_platdata(NULL);
	i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));

	/*
	 * Since sdhci instance 2 can contain a bootable media,
	 * sdhci instance 0 is registered after instance 2.
	 */
	s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
	s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);

	origen_ehci_init();
	origen_ohci_init();
	s3c_hsotg_set_platdata(&origen_hsotg_pdata);

	s5p_tv_setup();
	s5p_i2c_hdmiphy_set_platdata(NULL);
	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);

#ifdef CONFIG_DRM_EXYNOS_FIMD
	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
	exynos4_fimd0_gpio_setup_24bpp();
#else
	s5p_fimd0_set_platdata(&origen_lcd_pdata);
#endif

	platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));

	pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
	samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);

	origen_bt_setup();
}

예제 #8

파일: mach-universal_c210.c 프로젝트: 5victor/linux

static void __init universal_machine_init(void)
{
	universal_sdhci_init();
	s5p_tv_setup();

	s3c_i2c0_set_platdata(&universal_i2c0_platdata);
	i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));

	universal_tsp_init();
	s3c_i2c3_set_platdata(NULL);
	i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));

	s3c_i2c5_set_platdata(NULL);
	s5p_i2c_hdmiphy_set_platdata(NULL);
	i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));

	s5p_fimd0_set_platdata(&universal_lcd_pdata);

	universal_touchkey_init();
	i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
			ARRAY_SIZE(i2c_gpio12_devs));

	universal_camera_init();

	/* Last */
	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));

	s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev;
	s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev;

	s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
}