예제 #1
0
파일: ct.c 프로젝트: 2asoft/freebsd
/**************************************************
 * ### SCSI PHASE SEQUENCER ###
 **************************************************/
static int
ct_reselected(struct ct_softc *ct, u_int8_t scsi_status)
{
	struct scsi_low_softc *slp = &ct->sc_sclow;
	struct ct_bus_access_handle *chp = &ct->sc_ch;
	struct targ_info *ti;
	u_int sid;
	u_int8_t regv;

	ct->sc_atten = 0;
	ct->sc_satgo &= ~CT_SAT_GOING;
	regv = ct_cr_read_1(chp, wd3s_sid);
	if ((regv & SIDR_VALID) == 0)
		return EJUSTRETURN;

	sid = regv & SIDR_IDM;
	if ((ti = scsi_low_reselected(slp, sid)) == NULL)
		return EJUSTRETURN;

	ct_target_nexus_establish(ct, 0, SCSI_LOW_READ);
	if (scsi_status != BSR_AFM_RESEL)
		return EJUSTRETURN;

	SCSI_LOW_SETUP_PHASE(ti, PH_MSGIN);
	regv = ct_cr_read_1(chp, wd3s_data);
	if (scsi_low_msgin(slp, ti, (u_int) regv) == 0)
	{
		if (scsi_low_is_msgout_continue(ti, 0) != 0)
		{
			/* XXX: scsi_low_attetion */
			scsi_low_attention(slp);
		}
	}

	if (ct->sc_atten != 0)
	{
		ct_attention(ct);
	}

	ct_cr_write_1(chp, wd3s_cmd, WD3S_NEGATE_ACK);
	return EJUSTRETURN;
}
예제 #2
0
int
stgintr(void *arg)
{
	struct stg_softc *sc = arg;
	struct scsi_low_softc *slp = &sc->sc_sclow;
	bus_space_tag_t iot = sc->sc_iot;
	bus_space_handle_t ioh = sc->sc_ioh;
	struct targ_info *ti;
	struct buf *bp;
	u_int derror, flags;
	int len;
	u_int8_t status, astatus, regv;

	/*******************************************
	 * interrupt check
	 *******************************************/
	if (slp->sl_flags & HW_INACTIVE)
		return 0;

	astatus = bus_space_read_1(iot, ioh, tmc_astat);
	status = bus_space_read_1(iot, ioh, tmc_bstat);

	if ((astatus & ASTAT_STATMASK) == 0 || astatus == (u_int8_t) -1)
		return 0;

	bus_space_write_1(iot, ioh, tmc_ictl, 0);
	if (astatus & ASTAT_SCSIRST)
	{
		bus_space_write_1(iot, ioh, tmc_fctl,
				  sc->sc_fcRinit | FCTL_CLRFIFO);
		bus_space_write_1(iot, ioh, tmc_fctl, sc->sc_fcRinit);
		bus_space_write_1(iot, ioh, tmc_ictl, 0);

		scsi_low_restart(slp, SCSI_LOW_RESTART_SOFT, 
				 "bus reset (power off?)");
		return 1;
	}

	/*******************************************
	 * debug section
	 *******************************************/
#ifdef	STG_DEBUG
	if (stg_debug)
	{
		scsi_low_print(slp, NULL);
		kprintf("%s: st %x ist %x\n\n", slp->sl_xname,
		       status, astatus);
#ifdef	DDB
		if (stg_debug > 1)
			SCSI_LOW_DEBUGGER("stg");
#endif	/* DDB */
	}
#endif	/* STG_DEBUG */

	/*******************************************
	 * reselection & nexus
	 *******************************************/
	if ((status & RESEL_PHASE_MASK)== PHASE_RESELECTED)
	{
		if (stg_reselected(sc) == EJUSTRETURN)
			goto out;
	}

	if ((ti = slp->sl_Tnexus) == NULL)
		return 0;

	derror = 0;
	if ((astatus & ASTAT_PARERR) != 0 && ti->ti_phase != PH_ARBSTART &&
	    (sc->sc_fcRinit & FCTL_PARENB) != 0)
	{
		slp->sl_error |= PARITYERR;
		derror = SCSI_LOW_DATA_PE;
		if ((status & PHASE_MASK) == MESSAGE_IN_PHASE)
			scsi_low_assert_msg(slp, ti, SCSI_LOW_MSG_PARITY, 0);
		else
			scsi_low_assert_msg(slp, ti, SCSI_LOW_MSG_ERROR, 1);
	}

	/*******************************************
	 * aribitration & selection
	 *******************************************/
	switch (ti->ti_phase)
	{
	case PH_ARBSTART:
		if ((astatus & ASTAT_ARBIT) == 0)
		{
#ifdef	STG_STATICS
			stg_statics.arbit_fail_0 ++;
#endif	/* STG_STATICS */
			goto arb_fail;
		}

		status = bus_space_read_1(iot, ioh, tmc_bstat);
		if ((status & BSTAT_IO) != 0)
		{
			/* XXX:
			 * Selection vs Reselection conflicts.
			 */
#ifdef	STG_STATICS
			stg_statics.arbit_fail_1 ++;
#endif	/* STG_STATICS */
arb_fail:
			bus_space_write_1(iot, ioh, tmc_fctl, sc->sc_fcRinit);
			stghw_bcr_write_1(sc, BCTL_BUSFREE);
			scsi_low_arbit_fail(slp, slp->sl_Qnexus);
			goto out;
		}

		/*
		 * selection assert start.
		 */
		SCSI_LOW_SETUP_PHASE(ti, PH_SELSTART);
		scsi_low_arbit_win(slp);

		crit_enter();
		bus_space_write_1(iot, ioh, tmc_scsiid,
				  sc->sc_idbit | (1 << ti->ti_id));
		stghw_bcr_write_1(sc, sc->sc_imsg | sc->sc_busc | BCTL_SEL);
		bus_space_write_1(iot, ioh, tmc_fctl, sc->sc_fcWinit);
		if ((stg_io_control & STG_WAIT_FOR_SELECT) != 0)
		{
			/* selection abort delay 200 + 100 micro sec */
			if (stghw_select_targ_wait(sc, 300) == 0)
			{
				SCSI_LOW_SETUP_PHASE(ti, PH_SELECTED);
				stg_selection_done_and_expect_msgout(sc);
			}	
		}
		crit_exit();
		goto out;

	case PH_SELSTART:
		if ((status & BSTAT_BSY) == 0)
		{
			/* selection timeout delay 250 ms */
			if (stghw_select_targ_wait(sc, 250 * 1000) != 0)
			{
				stg_disconnected(sc, ti);
				goto out;
			}
		}

		SCSI_LOW_SETUP_PHASE(ti, PH_SELECTED);
		stg_selection_done_and_expect_msgout(sc);
		goto out;

	case PH_SELECTED:
		if ((status & BSTAT_REQ) == 0)
			goto out;
		stg_target_nexus_establish(sc);
		break;

	case PH_RESEL:
		if ((status & BSTAT_REQ) == 0)
			goto out;

		/* clear a busy line */
		bus_space_write_1(iot, ioh, tmc_fctl, sc->sc_fcRinit);
		stghw_bcr_write_1(sc, sc->sc_busc);
		stg_target_nexus_establish(sc);
		if ((status & PHASE_MASK) != MESSAGE_IN_PHASE)
		{
			kprintf("%s: unexpected phase after reselect\n",
			       slp->sl_xname);
			slp->sl_error |= FATALIO;
			scsi_low_assert_msg(slp, ti, SCSI_LOW_MSG_ABORT, 1);
			goto out;
		}
		break;
	}

	/*******************************************
	 * data phase
	 *******************************************/
	if ((slp->sl_flags & HW_PDMASTART) && STG_IS_PHASE_DATA(status) == 0)
	{
		if (slp->sl_scp.scp_direction == SCSI_LOW_READ)
			stg_pio_read(sc, ti, 0);

		stg_pdma_end(sc, ti);
	}

	/*******************************************
	 * scsi seq
	 *******************************************/
	switch (status & PHASE_MASK)
	{
	case COMMAND_PHASE:
		if (stg_expect_signal(sc, COMMAND_PHASE, BSTAT_REQ) <= 0)
			break;

		SCSI_LOW_SETUP_PHASE(ti, PH_CMD);
		if (scsi_low_cmd(slp, ti) != 0)
		{
			scsi_low_attention(slp);
		}

		if (stg_xfer(sc, slp->sl_scp.scp_cmd, slp->sl_scp.scp_cmdlen,
			     COMMAND_PHASE, 0) != 0)
		{
			kprintf("%s: CMDOUT short\n", slp->sl_xname);
		}
		break;

	case DATA_OUT_PHASE:
		SCSI_LOW_SETUP_PHASE(ti, PH_DATA);
		if (scsi_low_data(slp, ti, &bp, SCSI_LOW_WRITE) != 0)
		{
			scsi_low_attention(slp);
		}

		if ((sc->sc_icinit & ICTL_FIFO) != 0)
			stg_pio_write(sc, ti, sc->sc_wthold);
		else
			stg_pio_write(sc, ti, 0);
		break;

	case DATA_IN_PHASE:
		SCSI_LOW_SETUP_PHASE(ti, PH_DATA);
		if (scsi_low_data(slp, ti, &bp, SCSI_LOW_READ) != 0)
		{
			scsi_low_attention(slp);
		}

		if ((sc->sc_icinit & ICTL_FIFO) != 0)
			stg_pio_read(sc, ti, sc->sc_rthold);
		else
			stg_pio_read(sc, ti, 0);
		break;

	case STATUS_PHASE:
		regv = stg_expect_signal(sc, STATUS_PHASE, BSTAT_REQ);
		if (regv <= 0)
			break;

		SCSI_LOW_SETUP_PHASE(ti, PH_STAT);
		regv = bus_space_read_1(iot, ioh, tmc_sdna);
		if (scsi_low_statusin(slp, ti, regv | derror) != 0)
		{
			scsi_low_attention(slp);
		}
		if (regv != bus_space_read_1(iot, ioh, tmc_rdata))
		{
			kprintf("%s: STATIN: data mismatch\n", slp->sl_xname);
		}
		stg_negate_signal(sc, BSTAT_ACK, "statin<ACK>");
		break;

	case MESSAGE_OUT_PHASE:
		if (stg_expect_signal(sc, MESSAGE_OUT_PHASE, BSTAT_REQ) <= 0)
			break;

		SCSI_LOW_SETUP_PHASE(ti, PH_MSGOUT);
		flags = (ti->ti_ophase != ti->ti_phase) ? 
				SCSI_LOW_MSGOUT_INIT : 0;
		len = scsi_low_msgout(slp, ti, flags);

		if (len > 1 && slp->sl_atten == 0)
		{
			scsi_low_attention(slp);
		}

		if (stg_xfer(sc, ti->ti_msgoutstr, len, MESSAGE_OUT_PHASE,
			     slp->sl_clear_atten) != 0)
		{
			kprintf("%s: MSGOUT short\n", slp->sl_xname);
		}
		else
		{
			if (slp->sl_msgphase >= MSGPH_ABORT) 
			{
				stg_disconnected(sc, ti);
			}
		}
		break;

	case MESSAGE_IN_PHASE:
		/* confirm phase and req signal */
		if (stg_expect_signal(sc, MESSAGE_IN_PHASE, BSTAT_REQ) <= 0)
			break;

		SCSI_LOW_SETUP_PHASE(ti, PH_MSGIN);

		/* read data with NOACK */
		regv = bus_space_read_1(iot, ioh, tmc_sdna);

		if (scsi_low_msgin(slp, ti, derror | regv) == 0)
		{
			if (scsi_low_is_msgout_continue(ti, 0) != 0)
			{
				scsi_low_attention(slp);
			}
		}

		/* read data with ACK */
		if (regv != bus_space_read_1(iot, ioh, tmc_rdata))
		{
			kprintf("%s: MSGIN: data mismatch\n", slp->sl_xname);
		}

		/* wait for the ack negated */
		stg_negate_signal(sc, BSTAT_ACK, "msgin<ACK>");

		if (slp->sl_msgphase != 0 && slp->sl_msgphase < MSGPH_ABORT)
		{
			stg_disconnected(sc, ti);
		}
		break;

	case BUSFREE_PHASE:
		kprintf("%s: unexpected disconnect\n", slp->sl_xname);
		stg_disconnected(sc, ti);
		break;

	default:
		slp->sl_error |= FATALIO;
		kprintf("%s: unknown phase bus %x intr %x\n",
			slp->sl_xname, status, astatus);
		break;
	}

out:
	bus_space_write_1(iot, ioh, tmc_ictl, sc->sc_icinit);
	return 1;
}
예제 #3
0
파일: ct.c 프로젝트: 2asoft/freebsd
static int
ct_poll(void *arg)
{
	struct ct_softc *ct = arg;
	struct scsi_low_softc *slp = &ct->sc_sclow;
	struct ct_bus_access_handle *chp = &ct->sc_ch;
	struct targ_info *ti;
	struct buf *bp;
	u_int derror, flags;
	int len, satgo, error;
	u_int8_t scsi_status, regv;

again:
	if (slp->sl_flags & HW_INACTIVE)
		return 0;

	/**************************************************
	 * Get status & bus phase
	 **************************************************/
	if ((ct_stat_read_1(chp) & STR_INT) == 0)
		return 0;

	scsi_status = ct_cr_read_1(chp, wd3s_stat);
	if (scsi_status == ((u_int8_t) -1))
		return 1;

	/**************************************************
	 * Check reselection, or nexus
	 **************************************************/
	if (scsi_status == BSR_RESEL || scsi_status == BSR_AFM_RESEL)
	{
		if (ct_reselected(ct, scsi_status) == EJUSTRETURN)
			return 1;
	}

	if ((ti = slp->sl_Tnexus) == NULL)
		return 1;

	/**************************************************
	 * Debug section
	 **************************************************/
#ifdef	CT_DEBUG
	if (ct_debug > 0)
	{
		scsi_low_print(slp, NULL);
		device_printf(slp->sl_dev, "scsi_status 0x%x\n\n", 
		       (u_int) scsi_status);
#ifdef	KDB
		if (ct_debug > 1)
			kdb_enter(KDB_WHY_CAM, "ct");
#endif	/* KDB */
	}
#endif	/* CT_DEBUG */

	/**************************************************
	 * Internal scsi phase
	 **************************************************/
	satgo = ct->sc_satgo;
	ct->sc_satgo &= ~CT_SAT_GOING;

	switch (ti->ti_phase)
	{
	case PH_SELSTART:
		if ((satgo & CT_SAT_GOING) == 0)
		{
			if (scsi_status != BSR_SELECTED)
			{
				ct_phase_error(ct, scsi_status);
				return 1;
			}
			scsi_low_arbit_win(slp);
			SCSI_LOW_SETUP_PHASE(ti, PH_SELECTED);
			return 1;
		}
		else
		{
			scsi_low_arbit_win(slp);
			SCSI_LOW_SETUP_PHASE(ti, PH_MSGOUT); /* XXX */
		}
		break;

	case PH_RESEL:
	    	if ((scsi_status & BSR_PHVALID) == 0 ||
		    (scsi_status & BSR_PM) != BSR_MSGIN)
		{
			scsi_low_restart(slp, SCSI_LOW_RESTART_HARD, 
				 "phase miss after reselect");
			return 1;
		}
		break;

	default:
		if (slp->sl_flags & HW_PDMASTART)
		{
			slp->sl_flags &= ~HW_PDMASTART;
			if (ct->sc_dma & CT_DMA_DMASTART)
			{
				(*ct->ct_dma_xfer_stop) (ct);
				ct->sc_dma &= ~CT_DMA_DMASTART;
			}
			else if (ct->sc_dma & CT_DMA_PIOSTART)
			{
				(*ct->ct_pio_xfer_stop) (ct);
				ct->sc_dma &= ~CT_DMA_PIOSTART;
			}
			else
			{
				scsi_low_data_finish(slp);
			}
		}
		break;
	}

	/**************************************************
	 * parse scsi phase
	 **************************************************/
	if (scsi_status & BSR_PHVALID)
	{
		/**************************************************
		 * Normal SCSI phase.
		 **************************************************/
		if ((scsi_status & BSR_CM) == BSR_CMDABT)
		{
			ct_phase_error(ct, scsi_status);
			return 1;
		}

		switch (scsi_status & BSR_PM)
		{
		case BSR_DATAOUT:
			SCSI_LOW_SETUP_PHASE(ti, PH_DATA);
			if (scsi_low_data(slp, ti, &bp, SCSI_LOW_WRITE) != 0)
			{
				ct_attention(ct);
			}
			goto common_data_phase;

		case BSR_DATAIN:
			SCSI_LOW_SETUP_PHASE(ti, PH_DATA);
			if (scsi_low_data(slp, ti, &bp, SCSI_LOW_READ) != 0)
			{
				ct_attention(ct);
			}

common_data_phase:
			if (slp->sl_scp.scp_datalen > 0)
			{
				slp->sl_flags |= HW_PDMASTART;
				if ((ct->sc_xmode & CT_XMODE_PIO) != 0)
				{
					error = (*ct->ct_pio_xfer_start) (ct);
					if (error == 0)
					{
						ct->sc_dma |= CT_DMA_PIOSTART;
						return 1;
					}
				}

				if ((ct->sc_xmode & CT_XMODE_DMA) != 0)
				{
					error = (*ct->ct_dma_xfer_start) (ct);
					if (error == 0)
					{
						ct->sc_dma |= CT_DMA_DMASTART;
						return 1;
					}
				}
			}
			else
			{	
				if (slp->sl_scp.scp_direction == SCSI_LOW_READ)
				{
					if (!(slp->sl_flags & HW_READ_PADDING))
					{
						device_printf(slp->sl_dev,
						    "read padding required\n");
						return 1;
					}
				}
				else
				{
					if (!(slp->sl_flags & HW_WRITE_PADDING))
					{
						device_printf(slp->sl_dev,
						    "write padding required\n");
						return 1;
					}
				}
				slp->sl_flags |= HW_PDMASTART;
			}

			ct_io_xfer(ct);
			return 1;

		case BSR_CMDOUT:
			SCSI_LOW_SETUP_PHASE(ti, PH_CMD);
			if (scsi_low_cmd(slp, ti) != 0)
			{
				ct_attention(ct);
			}

			if (ct_xfer(ct, slp->sl_scp.scp_cmd,
				    slp->sl_scp.scp_cmdlen,
				    SCSI_LOW_WRITE, &derror) != 0)
			{
				device_printf(slp->sl_dev,
				    "scsi cmd xfer short\n");
			}
			return 1;

		case BSR_STATIN:
			SCSI_LOW_SETUP_PHASE(ti, PH_STAT);
			if ((ct_io_control & CT_USE_CCSEQ) != 0)
			{
				if (scsi_low_is_msgout_continue(ti, 0) != 0 ||
				    ct->sc_atten != 0)
				{
					ct_xfer(ct, &regv, 1, SCSI_LOW_READ,
						&derror);
					scsi_low_statusin(slp, ti,
						  	  regv | derror);
				}
				else
				{
					ct->sc_satgo |= CT_SAT_GOING;
					cthw_set_count(chp, 0);
					cthw_phase_bypass(ct, 0x41);
				}
			}
			else
			{
				ct_xfer(ct, &regv, 1, SCSI_LOW_READ, &derror);
				scsi_low_statusin(slp, ti, regv | derror);
			}
			return 1;

		case BSR_UNSPINFO0:
		case BSR_UNSPINFO1:
			device_printf(slp->sl_dev, "illegal bus phase (0x%x)\n",
				(u_int) scsi_status);
			scsi_low_print(slp, ti);
			return 1;

		case BSR_MSGOUT:
			SCSI_LOW_SETUP_PHASE(ti, PH_MSGOUT);
			flags = SCSI_LOW_MSGOUT_UNIFY;
		        if (ti->ti_ophase != ti->ti_phase)
				flags |= SCSI_LOW_MSGOUT_INIT;
			len = scsi_low_msgout(slp, ti, flags);

			if (len > 1 && slp->sl_atten == 0)
			{
				ct_attention(ct);
			}

			if (ct_xfer(ct, ti->ti_msgoutstr, len, 
				    SCSI_LOW_WRITE, &derror) != 0)
			{
				device_printf(slp->sl_dev,
				    "scsi msgout xfer short\n");
			}
			SCSI_LOW_DEASSERT_ATN(slp);
			ct->sc_atten = 0;
			return 1;

		case BSR_MSGIN:/* msg in */
			SCSI_LOW_SETUP_PHASE(ti, PH_MSGIN);

			ct_xfer(ct, &regv, 1, SCSI_LOW_READ, &derror);
			if (scsi_low_msgin(slp, ti, regv | derror) == 0)
			{
				if (scsi_low_is_msgout_continue(ti, 0) != 0)
				{
					/* XXX: scsi_low_attetion */
					scsi_low_attention(slp);
				}
			}

			if ((ct_io_control & CT_FAST_INTR) != 0)
			{
				if (ct_catch_intr(ct) == 0)
					goto again;
			}
			return 1;
		}
	}
	else
	{
		/**************************************************
		 * Special SCSI phase
		 **************************************************/
		switch (scsi_status)
		{
		case BSR_SATSDP: /* SAT with save data pointer */
			SCSI_LOW_SETUP_PHASE(ti, PH_MSGIN);
			ct->sc_satgo |= CT_SAT_GOING;
			scsi_low_msgin(slp, ti, MSG_SAVESP);
			cthw_phase_bypass(ct, 0x41);
			return 1;

		case BSR_SATFIN: /* SAT COMPLETE */
			/*
			 * emulate statusin => msgin
			 */
			SCSI_LOW_SETUP_PHASE(ti, PH_STAT);
			scsi_low_statusin(slp, ti, ct_cr_read_1(chp, wd3s_lun));

			SCSI_LOW_SETUP_PHASE(ti, PH_MSGIN);
			scsi_low_msgin(slp, ti, MSG_COMP);

			scsi_low_disconnected(slp, ti);
			return 1;

		case BSR_ACKREQ: /* negate ACK */
			if (ct->sc_atten != 0)
			{
				ct_attention(ct);
			}

			ct_cr_write_1(chp, wd3s_cmd, WD3S_NEGATE_ACK);
			if ((ct_io_control & CT_FAST_INTR) != 0)
			{
				/* XXX:
				 * Should clear a pending interrupt and
				 * sync with a next interrupt!
				 */
				ct_catch_intr(ct);
			}
			return 1;

		case BSR_DISC: /* disconnect */
			if (slp->sl_msgphase == MSGPH_NULL &&
			    (satgo & CT_SAT_GOING) != 0)
			{
				/*
				 * emulate disconnect msg
				 */
				SCSI_LOW_SETUP_PHASE(ti, PH_MSGIN);
				scsi_low_msgin(slp, ti, MSG_DISCON);
			}	
			scsi_low_disconnected(slp, ti);
			return 1;

		default:
			break;
		}
	}

	ct_phase_error(ct, scsi_status);
	return 1;
}
예제 #4
0
파일: ct.c 프로젝트: 2asoft/freebsd
static int
ct_start_selection(struct ct_softc *ct, struct slccb *cb)
{
	struct scsi_low_softc *slp = &ct->sc_sclow;
	struct ct_bus_access_handle *chp = &ct->sc_ch;

	struct targ_info *ti = slp->sl_Tnexus;
	struct lun_info *li = slp->sl_Lnexus;
	int s, satok;
	u_int8_t cmd;

	ct->sc_tmaxcnt = cb->ccb_tcmax * 1000 * 1000;
	ct->sc_atten = 0;
	satok = 0;

	if (scsi_low_is_disconnect_ok(cb) != 0)
	{	
		if (ct->sc_chiprev >= CT_WD33C93_A)
			satok = 1;
		else if (cthw_cmdlevel[slp->sl_scp.scp_cmd[0]] != 0)
			satok = 1;
	}

	if (satok != 0 &&
	    scsi_low_is_msgout_continue(ti, SCSI_LOW_MSG_IDENTIFY) == 0)
	{
		cmd = WD3S_SELECT_ATN_TFR;
		ct->sc_satgo = CT_SAT_GOING;
	}
	else
	{
		cmd = WD3S_SELECT_ATN;
		ct->sc_satgo = 0;
	}

	if ((ct_stat_read_1(chp) & (STR_BSY | STR_INT | STR_CIP)) != 0)
		return SCSI_LOW_START_FAIL;

	if ((ct->sc_satgo & CT_SAT_GOING) != 0)
	{
		(void) scsi_low_msgout(slp, ti, SCSI_LOW_MSGOUT_INIT);
		scsi_low_cmd(slp, ti);
		ct_cr_write_1(chp, wd3s_oid, slp->sl_scp.scp_cmdlen);
		ct_write_cmds(chp, slp->sl_scp.scp_cmd, slp->sl_scp.scp_cmdlen);
	}
	else
	{
		/* anyway attention assert */
		SCSI_LOW_ASSERT_ATN(slp);
	}

	ct_target_nexus_establish(ct, li->li_lun, slp->sl_scp.scp_direction);

	s = splhigh();
	if ((ct_stat_read_1(chp) & (STR_BSY | STR_INT | STR_CIP)) == 0)
	{
		/* XXX: 
		 * Reload a lun again here.
		 */
		ct_cr_write_1(chp, wd3s_lun, li->li_lun);
		ct_cr_write_1(chp, wd3s_cmd, cmd);
		if ((ct_stat_read_1(chp) & STR_LCI) == 0)
		{
			splx(s);
			SCSI_LOW_SETUP_PHASE(ti, PH_SELSTART);
			return SCSI_LOW_START_OK;
		}
	}
	splx(s);
	return SCSI_LOW_START_FAIL;
}