void timer_pwr_off_hdlr()
{
	if(timer_pwr_idx>0){
		timer_pwr_cnt++;

		//if(timer_pwr_cnt>=(timer_tab[timer_pwr_idx]/*2*60*/)){
		if(timer_pwr_cnt>=(timer_tab[timer_pwr_idx]*2*60)){
			
			timer_pwr_idx =0;
			timer_pwr_cnt =0;
       		set_brightness_all_on();
			work_mode = IDLE_MODE;
			put_msg_fifo(MSG_SYS_POWERON);		
		}	
	}
}
예제 #2
0
void radio_chip_set_freq(u8 mode,bool disp_pro)
{
    xd_u8 freq_step =0;

    set_brightness_all_on();

    freq_step = Current_Band.Tune_Step;
	
    if (mode == FM_FRE_INC)
    {
        frequency=frequency+freq_step;
		
	 if (frequency > REG_MAX_FREQ)
	     frequency = REG_MIN_FREQ;		
    }
    else if (mode == FM_FRE_DEC)
    {
        frequency=frequency-freq_step;
		
	 if (frequency < REG_MIN_FREQ)
	      frequency =REG_MAX_FREQ;		
    }
    else{
		
	    if (frequency > REG_MAX_FREQ)
	        frequency = REG_MAX_FREQ;
		
	    if (frequency < REG_MIN_FREQ)
	        frequency =REG_MIN_FREQ;
    }
	
    set_freq(frequency);
	
    if(disp_pro)	
	Disp_Con(DISP_FREQ);			

#if 1//def SAVE_BAND_FREQ_INFO
#ifdef FM_UART_ENABLE
    printf("------->- set_radio_freq    fre:%4u   \r\n",frequency);
#endif
    save_radio_freq(frequency,cur_sw_fm_band*2+MEM_FREQ_BASE);
#endif
    set_sys_vol(my_music_vol);	

}
예제 #3
0
/*----------------------------------------------------------------------------*/
void ap_handle_hotkey(u8 key)
{
    u8 res;
    switch (key)
    {
    case MSG_POWER_DOWN:

		if(sys_pwr_flag==0){
			sys_pwr_flag =1;
			sys_mute_flag =1;
        		dac_mute_control(sys_mute_flag,1);					//调节音量时,自动UNMUTE
			work_mode =  IDLE_MODE;		
	        	put_msg_lifo(MSG_CHANGE_WORK_MODE);
		}
		else{

			sys_mute_flag =0;
        		//dac_mute_control(sys_mute_flag,1);					//调节音量时,自动UNMUTE
			sys_pwr_flag =0;
			//work_mode =  IDLE_MODE;
		}



		break;
		
    case MSG_MUTE_UNMUTE:

		sys_mute_flag=~sys_mute_flag;
		//dac_mute_toggle();		
        	dac_mute_control(sys_mute_flag,1);					//调节音量时,自动UNMUTE

		break;		    
#if 1   
    case MSG_MUSIC_PREV_FILE:												//选择上一个文件进行播放
    case MSG_MUSIC_FR:											//启动快退
	      	if ((disp_scenario == DISP_RTC_SCEN)&&(rtc_setting_flag!=0))
            	{
                	rtc_set_cnt=30;
                	curr_time_minus();
                	write_rtc(&curr_time);
                	//write_next_alm_sec();
                	disp_port(MENU_RTC);
            	}
    		break;
    case MSG_MUSIC_NEXT_FILE:												//选择下一个文件进行播放
    case MSG_MUSIC_FF:											//启动快退

	      	if ((disp_scenario == DISP_RTC_SCEN)&&(rtc_setting_flag!=0))
            	{
                	rtc_set_cnt=30;
                	curr_time_plus();
                	write_rtc(&curr_time);
                	//write_next_alm_sec();
                	disp_port(MENU_RTC);
            	}
		break;
    case MSG_NEXT_WORKMODE:
		
		//set_brightness_all_on();
		if(work_mode==FM_RADIO_MODE)break;
		
		if(rtc_setting_flag!=0){

			rtc_coordinate++;
                	rtc_set_cnt=30;

			if(rtc_coordinate>4){
				rtc_coordinate = 3;
				rtc_setting_flag = 0x00;
			}
			break;
		}
		
		if(disp_scenario == DISP_NORMAL){

			    	input_number_en = 0;									//允许数字输入功能
				disp_scenario = DISP_RTC_SCEN;
				rtc_disp_hdlr();
		}
		else{

			if(device_online==0)break;
		    	input_number_en = 1;									//允许数字输入功能
			disp_scenario = DISP_NORMAL;
	              disp_port(MENU_MUSIC_MAIN);
		}
		break;    
		
    case MSG_TIME_SETTING:
	       //set_brightness_all_on();
		if(disp_scenario == DISP_RTC_SCEN){

	             	rtc_set_cnt=30;				
			rtc_setting_flag = 0x01;
			rtc_coordinate = 3;
		}
	break;
    case MSG_USB_DISK_OUT:
    case MSG_SDMMC_OUT:
        if((RECODE_WORKING == encode_status)||(RECODE_PAUSE == encode_status))
        {	
        
#ifdef AUTO_PLAY_RADIO_REC_FILE
		auto_play_radio_rec=0;
#endif
		rec_device_out = 1;
		api_stop_encode();
            	if(work_mode == FM_RADIO_MODE){
			main_menu = MENU_FM_MAIN;//
			disp_port(MENU_FM_MAIN);
            		break;
	     	}
        } 
#ifndef LCD_BACK_LIGHT_DUMMY						
        set_brightness_all_on();
#endif
        if((!device_check()) && (REC_MIC_MODE == work_mode))
        {
             put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
             break;   
        }

	    if(MUSIC_MODE != work_mode)
			break;
        //put_msg_lifo(MSG_DEVICE_REMOVED);
        disk_remove_deal_for_music();
        break;
#endif
#if USB_DEVICE_ENABLE
    case MSG_USB_PC_IN:
        break_encode();
        set_brightness_all_on();
        device_check();
        work_mode = USB_DEVICE_MODE;
        put_msg_lifo(MSG_CHANGE_WORK_MODE);
        break;

    case MSG_USB_PC_OUT:
        set_brightness_all_on();
        break;
#endif

    case MSG_SDMMC_IN :
#ifndef LCD_BACK_LIGHT_DUMMY						
        set_brightness_all_on();
#endif
	 device_check();
        if((RECODE_WORKING == encode_status)||(RECODE_PAUSE == encode_status))
        {	
            break;
        } 
        
        break_encode();

	disp_scenario = DISP_NORMAL;

#if USB_DEVICE_ENABLE
        if (work_mode == USB_DEVICE_MODE)
            break;
#endif

		given_device = read_info(MEM_ACTIVE_DEV);

		if(given_device != DEVICE_SDMMC0_REC)
		//	given_device = DEVICE_SDMMC0_REC;
		//else
			given_device = DEVICE_SDMMC0;

        given_file_method = PLAY_BREAK_POINT;
        put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
        break;

    case MSG_USB_DISK_IN  :
#ifndef LCD_BACK_LIGHT_DUMMY						
        set_brightness_all_on();
#endif
		device_check();
        if((RECODE_WORKING == encode_status)||(RECODE_PAUSE == encode_status))
        {
            break;
        }
        break_encode();

	disp_scenario = DISP_NORMAL;
	   
		given_device = read_info(MEM_ACTIVE_DEV);

		if(given_device != DEVICE_UDISK_REC)
		//	given_device = DEVICE_UDISK_REC;
		//else
	    	given_device = DEVICE_UDISK;

        given_file_method = PLAY_BREAK_POINT;      
        put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
        break;
		
#if 0
    case MSG_NEXT_WORKMODE:

#if 0//def K820_LHD_820_REC_V001
	    if(MUSIC_MODE != work_mode)
			break;
	 if(device_check()>0){
	 
	        given_device = DEVICE_AUTO_NEXT;
	        given_file_method = PLAY_BREAK_POINT;
	        put_msg_lifo(MSG_MUSIC_SELECT_NEW_DEVICE);
	        backup_music_point();
	 }
	 else{
    		//flashled(3);
              work_mode =IDLE_MODE;
        	put_msg_lifo(MSG_CHANGE_WORK_MODE);		
	 }
	break;

#endif

	break_encode();
        work_mode++;
        if (work_mode > MAX_WORK_MODE)
            work_mode = MUSIC_MODE;

        put_msg_lifo(MSG_CHANGE_WORK_MODE);
        break;
#endif		
#if 1
    case MSG_VOL_UP:
        if(vol_change_en==0)
            break;
        dac_mute_control(0,1);					//调节音量时,自动UNMUTE
        main_vol_set(0, CHANGE_VOL_INC);
        //write_info(MEM_VOL, main_vol_set(0, CHANGE_VOL_INC));
        disp_port(MENU_MAIN_VOL);
        break;

    case MSG_VOL_DOWN:
        if(vol_change_en==0)
            break;
        dac_mute_control(0,1);					//调节音量时,自动UNMUTE
        main_vol_set(0, CHANGE_VOL_DEC);
        //write_info(MEM_VOL, main_vol_set(0, CHANGE_VOL_DEC));
        disp_port(MENU_MAIN_VOL);
        break;
#endif
    case MSG_0:
    case MSG_1:
    case MSG_2:
    case MSG_3:
    case MSG_4:
    case MSG_5:
    case MSG_6:
    case MSG_7:
    case MSG_8:
    case MSG_9:
        if (!input_number_en)
            break;
		
	 if((input_number)>6553){
		input_number = 0x0000;			
	 }
        if (input_number > 9999)
            input_number = 0;

           input_number = input_number * 10 + key;
        disp_port(MENU_INPUT_NUMBER);
        break;
//2  REC FSM BEGIN
    case MSG_REC_KEY:	  //录音开始和结束

	  if(work_mode ==IDLE_MODE)
	  	break;
	  	
        if(RECODE_PLAY >= encode_status)
        {
            put_msg_lifo(MSG_REC_FIND);
#ifdef AUTO_PLAY_RADIO_REC_FILE
	    if(work_mode == FM_RADIO_MODE){
		auto_play_radio_rec=1;
	    }
#endif
			
        }
        else
        {
#ifdef AUTO_PLAY_RADIO_REC_FILE
		//auto_play_radio_rec=0;
#endif
            put_msg_lifo(MSG_REC_STOP);
        }
        break;

	case MSG_MUSIC_PP:      //录音暂停和继续录音
	//case MSG_REC_PP:      //录音暂停和继续录音

        if(RECODE_WORKING == encode_status)
        {
            put_msg_lifo(MSG_REC_PAUSE);
        }
        else if(RECODE_PAUSE == encode_status)
        {

            put_msg_lifo(MSG_REC_CONTINUE);
        }
        break;

    case MSG_ENCODE_END:   //设备写err  或 设备满
		if(rec_device_out)		//录音时活动设备拔出,在设备拔出那里处理,在此不做处理
		{
			rec_device_out =0;
			break;
		}

        api_stop_encode();		//停止录音
		put_msg_lifo(MSG_REC_PLAY);
		break;

	 case MSG_ENCODE_FAT_FULL:  //建文件时
		api_stop_encode();		//停止录音
        if((!device_check())&& (REC_MIC_MODE == work_mode))
        {
             put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
             break;   
        }
       // break_encode();

        disp_port(main_menu);
        break;
////////////////录音涉及的各种状态
    case MSG_REC_FIND:
//        if(RECODE_PLAY >= encode_status)
//        {
//            break;
//        }
	if(get_device_online_status()==0){
		disp_port(MENU_NODEVICE);
		break;
	}	
        encode_status = RECODE_INIT;
        if(MUSIC_MODE == work_mode)
        {
            encode_device = device_active;	 //设置录音存储设备
            work_mode = REC_MIC_MODE;
            put_msg_lifo(MSG_CHANGE_WORK_MODE);
            break;
        }
	 else if(REC_MIC_MODE == work_mode){
		given_device = encode_device;
	 }
	 else //if((MUSIC_MODE != work_mode))
        {
            if (given_device == NO_DEVICE)
            {
                given_device = read_info(MEM_ACTIVE_DEV);
            }
        }
       // if( ((given_device & (~VIRTUAL_DEVICE))  != DEVICE_SDMMC0) && ((given_device & (~VIRTUAL_DEVICE)) != DEVICE_UDISK))
        {
            //given_device = DEVICE_SDMMC0;
        }
        SYSTEM_CLK_DIV2();

        put_msg_lifo(MSG_MUSIC_SELECT_NEW_DEVICE);
        break;
    case MSG_REC_START:		//开始录音

	 rec_device_out = 0;
	 rec_sys_set(0);  //0:24M   1:48M
        init_rec_name();
        device_active |= VIRTUAL_DEVICE;
        encode_device = device_active;	 //设置录音存储设备
        write_file_info(0);
        SYSTEM_CLK_DIV2();

        set_rec_channel(encode_channel); //设置录音通道
        set_rec_vol(encode_vol);		 //设置录音音量
        if(REC_MIC == encode_channel)
        {
            set_rec_track(TRACK_LEFT);
        }
        else
        {
            set_rec_track(TRACK_ALL);
        }
        /**/
        
        CLKGAT |= MP3CLK;// | SPIURCLK;
        CLKCON0 |= DACCLK;
        if(DEVICE_SDMMC0 == (device_active & (~VIRTUAL_DEVICE)))
        {
            CLKGAT |= USBCLK;
        }
        else if(DEVICE_UDISK == (device_active & (~VIRTUAL_DEVICE)))
        {
            CLKGAT |= SDCLK;
        }

        if(1 != start_encode(IS_MP3))			 //开始录音
		{
			put_msg_lifo(MSG_ENCODE_FAT_FULL);
			break;
		}
        /*
        if(REC_MIC_MODE == work_mode)
        {
    		while(!((cmd_ctl_rec(REC_NO_OPT,0)) &  FRIST_ADC_PACKET)) //采数据前的处理
    		{
    
    		}
            delay_10ms(50);//抛弃半秒的数据
        }
		cmd_ctl_rec(ENABLE_REC_DATA,ENABLE_REC_BIT);
        */
        encode_status = RECODE_WORKING;
#if FM_MODULE 
	//	if(FM_RADIO_MODE != work_mode)
#endif
		{
		 	main_menu = MENU_RECWORKING;//
		}
		disp_port(main_menu);
        break;
    case MSG_REC_STOP:      //停止录音
        api_stop_encode();		//停止录音
        if(work_mode==REC_MIC_MODE){
	 	put_msg_lifo(MSG_REC_PLAY);
        }
#ifdef REC_PLAY_KEY_BREAK_POINT
	rec_pley_bp_flag=0;
#endif		
        break;
    case MSG_REC_PAUSE:     //暂停录音
		encode_status = RECODE_PAUSE;
	
#if FM_MODULE 
		if(FM_RADIO_MODE == work_mode)
			disp_port(MENU_FM_MAIN);
		else
#endif
		{
			//main_menu = MENU_REC_PAUSE;	
		  	disp_port(MENU_RECWORKING);
		}
		 		
        pause_encode();
        break;
    case MSG_REC_CONTINUE:  //暂停录音之后继续录音
		encode_status = RECODE_WORKING;
	
#if FM_MODULE 
		if(FM_RADIO_MODE == work_mode)
			disp_port(MENU_FM_MAIN);
		else
#endif
		{
		 	main_menu = MENU_RECWORKING;//
		    disp_port(MENU_RECWORKING);
		}
			
        continue_encode();
        break;
    case MSG_REC_PLAY:     //播放最后的录音文件

	  if(work_mode ==IDLE_MODE)
	  	break;

#ifdef REC_PLAY_KEY_BREAK_POINT
	rec_pley_bp_flag=~rec_pley_bp_flag;
	if(rec_pley_bp_flag){
		last_play_index =  given_file_number;
	}
	else{
		given_file_number=last_play_index;
              put_msg_lifo(MSG_MUSIC_PLAY_NEW_FILE);
		break;
	}
#endif
	  
        encode_status = RECODE_PLAY;
        given_device = encode_device & (~VIRTUAL_DEVICE);

        if( (given_device != DEVICE_SDMMC0) && (given_device != DEVICE_UDISK))
        {
            given_device = DEVICE_SDMMC0;
        }
        given_device |= VIRTUAL_DEVICE;
        if((MUSIC_MODE != work_mode))
        {
            put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
        }
        else
        {
            put_msg_lifo(MSG_MUSIC_SELECT_NEW_DEVICE);
        }
        break;

    case MSG_MUSIC_SELECT_NEW_DEVICE:					        //重新选择设备

        res = find_device(given_device);

        if ((res == DEV_INIT_ERR) ||
                (res == NO_DEFINE_DEV))                    //指定的设备不在线,或初始化失败
        {
		
            given_device = DEVICE_AUTO_NEXT;			   //自动选择下一个设备
            put_msg_lifo(MSG_MUSIC_SELECT_NEW_DEVICE);
            break;
        }
        else if ((res == NO_EFFECTIVE_DEV) ||
                 (res == NO_DEV_ONLINE))                    //无可播放的设备
        {		
            if(RECODE_STOP != encode_status)
            {
                	encode_status = RECODE_STOP;
			if(REC_MIC_MODE == work_mode)
			{
				put_msg_lifo(MSG_NEXT_WORKMODE);
			}
            }
            else
            {	
                //put_msg_lifo(MSG_NEXT_WORKMODE);
                	if(disp_scenario == DISP_NORMAL){

#ifdef PLAY_STATUS_LED_FUNC
			    	set_play_status_led_spark(PLED_ON);
#endif	
				disp_scenario = DISP_RTC_SCEN;
				rtc_disp_hdlr();
			}
            }
            break;
        }
        else
        {		
            if(RECODE_PLAY < encode_status)
            {
                put_msg_lifo(MSG_REC_START);
            }
            else
            {
                if(RECODE_PLAY == encode_status)  //4去播刚录好的文件
                {
                    encode_status = RECODE_STOP;
#if VIRTUAL_ENABLE
#if 1//defined(K820_LHD_820_REC_V001)
                    given_file_number = logic_fileTotal;
#else
			given_file_number = encode_filenum;
#endif
#else
                    given_file_number = logic_fileTotal;
                    //given_file_number = encode_filenum + encode_fristfile -1; 
#endif
                    put_msg_lifo(MSG_MUSIC_PLAY_NEW_FILE);
                }
                else
                {
                    put_msg_lifo(MSG_MUSIC_SELECT_NEW_FILE);		//找到可用设备
                }
            }
        }
        break;
//2  REC FSM END



    }
}
예제 #4
0
/*----------------------------------------------------------------------------*/
void sys_init(void)
{
#ifdef UART_ENABLE
    uartInit();
    printf("power up \r\n");
 #endif

#if RTC_ENABLE
    if (init_rtc())
    {
        work_mode = SYS_RTC;
    }
#else 
	{
		u8 rtc_reg;
	    rtc_reg=read_rtc_reg();
		//printf("RTC reg:%02bx\n",rtc_reg);	
		if (rtc_reg & BIT(6))   ///<RTC是否完全掉电
	    {
#if (MEMORY_STYLE == USE_RTCRAM)
			reset_rtc_ram();
#endif
			rtc_reg &= ~(BIT(6)); 				 //清零PDGLG
    			write_rtc_reg(rtc_reg);
	    }
	}
#endif
    set_brightness_all_on();	

    P0IE_init();
    keyInit();
    timer1Init();
    timer3Init();
#ifdef USE_USB_SD_DECODE_FUNC	    
#ifndef NO_SD_DECODE_FUNC
    sd_speed_init(1,100);
    init_port_sd();
#endif
#endif
#if SDMMC_CMD_MODE
	sd_chk_ctl(SET_SD_H_CHK);
#endif
#ifdef USE_POWER_KEY
      sys_power_up();	
#endif	
    DACCON0 |= 0x05;	//打开DSP
    EA = 1;
#ifdef USE_POWER_KEY
      sys_power_up();	
#endif	
    work_mode = read_info(MEM_SYSMODE);

#ifdef CUSTOMED_POWER_ON_AT_RADIO_MODE
	work_mode  = SYS_FMREV;
#endif

    if (work_mode  == SYS_MP3DECODE_USB){

#ifdef REMOVE_USE_MODE
	work_mode  = SYS_FMREV;
	Disp_Con(DISP_TUNER);			
	return;
#endif

	Disp_Con(DISP_SCAN_DISK);

    }
    else if ((work_mode  == SYS_FMREV)
#ifdef AM_RADIO_FUNC		
	||(work_mode == SYS_AMREV)
#endif			
){

#ifdef AM_RADIO_FUNC		
		if(work_mode == SYS_AMREV){
			cur_sw_fm_band = MW_MODE;
		}
		else
#endif		
		{
			cur_sw_fm_band = FM_MODE;
		}
		Disp_Con(DISP_TUNER);			
    }
    else if (work_mode  == SYS_MCU_CD){

    		Disp_Con(DISP_SCAN_TOC);
    }	
    else if (work_mode  == SYS_AUX){
    		Disp_Con(DISP_AUX);
    }	
#if defined(USE_BLUE_TOOTH_FUNC)			
	
    else if (work_mode  == SYS_BLUE_TOOTH){
    		Disp_Con(DISP_BT);
    }	
#endif
	CD_PWR_GPIO_CTRL_INIT();
    	CD_PWR_GPIO_OFF();

	//TUNER_PWR_GPIO_CTRL_INIT();		
    	//TUNER_PWR_GPIO_OFF();

	AUX_GPIO_CTRL_INIT();
	AUX_PWR_GPIO_OFF();		

	BT_GPIO_CTRL_INIT();
	BT_PWR_GPIO_OFF();	
}
예제 #5
0
파일: main.c 프로젝트: go2net/kt-rec-pro
void main(void)
{
#if defined(USE_LCD_DRV_HT1621)
    lcd_ht1621_init();
#endif
    work_mode = MUSIC_MODE;
    //amp_mute(1);
    clock_in = T0CNT;									//输入时钟,define in clock.h
    //WDT_EN();
    sys_init();
    AMUX_P2IE_SET(AMUX1_IE);
    sys_info_init();
    clear_all_event();
    flush_all_msg();
#ifndef LCD_BACK_LIGHT_DUMMY					
    set_brightness_all_on();
#endif
#if (DISP_VER!=0)
    if(ADKEY_PORT==0){

	disp_port(MENU_VER);
	delay_10ms(80);
    }
#endif	
    delay_10ms(10);
    ///*
    while (1)
    {
        switch (work_mode)
        {
        case MUSIC_MODE:
            music_decode();
            break;
#if USB_DEVICE_ENABLE
        case USB_DEVICE_MODE:
            usb_audio_massstorage();
            break;
#endif     

#if FM_MODULE                     
        case FM_RADIO_MODE:
            radio_main_hdlr();
            break;
#endif

#ifdef USE_BLUE_TOOTH_FUNC
	case BLUE_TOOTH_MODE:
		Blue_tooth_main();
		break;
#endif
        //case AUX_MODE:
            //aux_fun();
          //  break;

#if RTC_ENABLE
        //case RTC_MODE:
            //rtc_fun();
         //   break;        
#endif
        case REC_MIC_MODE:
            rec_mic_fun();
            break;
			
        case IDLE_MODE:
            idle_mode();	
	     sys_mute_flag =0;
	     dac_mute_control(0,1);					//调节音量时,自动UNMUTE
    	     //set_brightness_all_on();
            break;		
        default:
            work_mode = MUSIC_MODE;
            break;
        }
        //write_info(MEM_SYSMODE ,work_mode);
    }
    //*/
}
예제 #6
0
void set_radio_freq(u8 mode)
{
   	xd_u16 freq_step =0;
#ifndef LCD_BACK_LIGHT_DUMMY				   
    	set_brightness_all_on();
#endif

#if defined(FAST_STICK_TUNE_FUNC)

	 if(fast_step_cnt==0){
		fast_step_cnt=1;
	 }

    	if(radio_band.bCurBand==FM_MODE){

		if(fast_step_cnt<6)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt);
		else if(fast_step_cnt<12)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt*5);
    	}
    	if(radio_band.bCurBand==MW_MODE){

		if(fast_step_cnt<6)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt);
		else if(fast_step_cnt<12)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt*5);
#ifdef MW_MODE_ADVANCED_TUNE_STEP
		else			
			freq_step = (radio_band.bTuneStep*fast_step_cnt*10);
#endif		
    	}		
	else{
		
		if(fast_step_cnt<6)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt);
		else if(fast_step_cnt<12)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt*10);
		else
			freq_step = (radio_band.bTuneStep*fast_step_cnt*20);
	}
#if 0
	if(fast_step_cnt>3){
		am_adj_timer=2;
	}
#endif

#elif defined(MID_SPEED_STICK_TUNE_FUNC)

	 if(fast_step_cnt==0){
		fast_step_cnt=1;
	 }

    	if(radio_band.bCurBand==FM_MODE){

		if(fast_step_cnt<8)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt);
		else if(fast_step_cnt<12)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt*3);
    	}
    	if(radio_band.bCurBand==MW_MODE){

		if(fast_step_cnt<6)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt);
		else if(fast_step_cnt<12)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt*5);
		else			
			freq_step = (radio_band.bTuneStep*fast_step_cnt*8);
		
    	}
    	else{
		
		if(fast_step_cnt<6)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt);
		else if(fast_step_cnt<12)				
			freq_step = (radio_band.bTuneStep*fast_step_cnt*5);		
		else		
			freq_step = (radio_band.bTuneStep*fast_step_cnt*8);
	}
		
#else
    	if(radio_band.bCurBand==FM_MODE){
		freq_step = (radio_band.bTuneStep);
	}
    	if(radio_band.bCurBand==MW_MODE){
		freq_step = (radio_band.bTuneStep);
	}
    	else{
		freq_step = (radio_band.bTuneStep);
	}		
#endif
	
    if (mode == RADIO_FRE_INC)
    {
        radio_band.wFreq=radio_band.wFreq+freq_step;
    }
    else if (mode == RADIO_FRE_DEC)
    {
        radio_band.wFreq=radio_band.wFreq-freq_step;
    }
	
    if (radio_band.wFreq > radio_band.wFreqUpLimit)
        radio_band.wFreq = radio_band.wFreqUpLimit;
	
    if (radio_band.wFreq < radio_band.wFreqDownLimit)
        radio_band.wFreq =radio_band.wFreqDownLimit;

    if(radio_band.bCurBand==0){

#ifdef FM_SOFTMUTE
		KT_FM_SOFTMUTE(radio_band.wFreq);
#else
		KT_FMTune(radio_band.wFreq);
#endif

    }
    else{

#ifdef AM_SOFTMUTE
		KT_AM_SOFTMUTE(radio_band.wFreq);
#else
		KT_AMTune(radio_band.wFreq);
#endif

    }
	
    disp_port(MENU_RADIO_MAIN);			

#ifdef SAVE_BAND_FREQ_INFO	
    save_radio_freq(radio_band.wFreq,radio_band.bCurBand);
#endif
    flush_all_msg();
#ifdef SEMI_AUTO_SCAN_FUNC
    if(scan_mode!=RADIO_SCAN_STOP){
		radio_all_scan_stop();
    }
#endif
	
}
void ap_handle_hotkey(u8 key)
{
    u8 res;

    switch (key)
    {

#if ECHO_ENABLE
    case MSG_REV_SW:
        echo_sw();		
        break;
    
	case MSG_REV_STRONG_UP:
	case MSG_REV_STRONG_DOWN:
        if(echo_strong(key))
        {
            disp_port(MENU_REV_STRONG);   
        }
        break;
	
     case MSG_REV_DEEP_UP:
     case MSG_REV_DEEP_DOWN:
        if(echo_deep(key))
        {
            disp_port(MENU_REV_DEEP);
        }
        break;
#endif

     case MSG_ALM_SETUP:
	 	//clr_alarm_func();
	 	break;
     case MSG_SNOOZE_SETUP:
	 	set_snooze_func();
	 	break;
     case MSG_MUTE_UNMUTE:
	 	sys_mute_flag =~sys_mute_flag;
		if(sys_mute_flag){
    			amp_mute(1);
			PT2313_Config(0,VOL_ADJ);
		}
		else{
			PT2313_Config(sys_main_vol,VOL_ADJ);
    			amp_mute(0);
		}
	 	break;
     case MSG_SLEEP_SETUP:
	 	if(work_mode != RTC_MODE){
			timer_pwr_setting();
		}
		break;
     case MSG_SYS_POWERON:
	 	
	 	if(work_mode==RTC_MODE){
			
	 		work_mode= MUSIC_MODE;
		}
		else{
	 		work_mode= RTC_MODE;
		}

		timer_pwr_idx=0;
		
	       put_msg_lifo(MSG_CHANGE_WORK_MODE);
	 	break;

		
    case MSG_USB_DISK_OUT:
    case MSG_SDMMC_OUT:
		
        set_brightness_all_on();
        if( (!device_check() ) && (encode_status >= RECODE_INIT )) //在录音时,活动设备拔出
        {	
            rec_device_out = 1;
            api_stop_encode();
            if(AUX_MODE == work_mode)
	        {
	            main_menu = MENU_AUX;
				disp_port(MENU_AUX);
	        }
#if FM_MODULE 
			else if(FM_RADIO_MODE == work_mode)
	        {
	            main_menu = MENU_FM_MAIN;
                disp_port(MENU_FM_MAIN);
	        }
#endif
            else
            {
                 put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
                 //break;  
            }
		}
        /*
        if((!device_check()) && (REC_MIC_MODE == work_mode))
        {
             put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
             break;   
        }
        */
	    if(MUSIC_MODE != work_mode)
			break;
        put_msg_lifo(MSG_DEVICE_REMOVED);
        disk_remove_deal_for_music();
        break;

#if USB_DEVICE_ENABLE
    case MSG_USB_PC_IN:

    #if ECHO_ENABLE
        if(BUSY == echo_ptr->status)
        {
            close_echo();
        }
    #endif
        break_encode();
        set_brightness_all_on();
        device_check();
        work_mode = USB_DEVICE_MODE;
        put_msg_lifo(MSG_CHANGE_WORK_MODE);
        break;

    case MSG_USB_PC_OUT:
        set_brightness_all_on();
        break;
#endif

    case MSG_AUX_IN :
        break_encode();
        set_brightness_all_on();
#if USB_DEVICE_ENABLE
        if ((AUX_MODE != work_mode) && (work_mode != USB_DEVICE_MODE))
#else
        if (AUX_MODE != work_mode)
#endif
        {
            work_mode = AUX_MODE;
            put_msg_lifo(MSG_CHANGE_WORK_MODE);
        }
        break;

    case MSG_AUX_OUT :
        set_brightness_all_on();

	 if(work_mode != AUX_MODE)break;
	 
        if((RECODE_WORKING == encode_status)||(RECODE_PAUSE == encode_status))
        {	
            break;
        } 

        break_encode();

	 given_device = DEVICE_UDISK;
        given_file_method = PLAY_BREAK_POINT;      
	 put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
		
        break;

    case MSG_SDMMC_IN :
        set_brightness_all_on();
	 device_check();
        if((RECODE_WORKING == encode_status)||(RECODE_PAUSE == encode_status))
        {	
            break;
        } 
        
        break_encode();

#if USB_DEVICE_ENABLE
        if (work_mode == USB_DEVICE_MODE)
            break;
#endif

		given_device = read_info(MEM_ACTIVE_DEV);

		if(given_device == DEVICE_SDMMC0_REC)
			given_device = DEVICE_SDMMC0_REC;
		else
			given_device = DEVICE_SDMMC0;

        given_file_method = PLAY_BREAK_POINT;
        put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
        break;

    case MSG_USB_DISK_IN  :
        set_brightness_all_on();
		device_check();
        if((RECODE_WORKING == encode_status)||(RECODE_PAUSE == encode_status))
        {
            break;
        }
        break_encode();
       
		given_device = read_info(MEM_ACTIVE_DEV);

		if(given_device == DEVICE_UDISK_REC)
			given_device = DEVICE_UDISK_REC;
		else
	    	given_device = DEVICE_UDISK;

        given_file_method = PLAY_BREAK_POINT;      
        put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
        break;

    case MSG_NEXT_WORKMODE:
        break_encode();


	 if(work_mode == MUSIC_MODE){

		device_check();		
	    	if(((device_active &(~VIRTUAL_DEVICE))== DEVICE_UDISK)&&(device_online&DEVICE_SDMMC0)>0){

		    	given_device = DEVICE_SDMMC0;
		       given_file_method = PLAY_BREAK_POINT;      
		        put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
			break;
		}
	 }
	
        work_mode++;
		

	if(work_mode > MAX_WORK_MODE){
		
            work_mode = MUSIC_MODE;

		if(get_device_online_status()&DEVICE_UDISK){
			
	    		given_device = DEVICE_UDISK;
		        given_file_method = PLAY_BREAK_POINT;      
		        put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
		}
		else if(get_device_online_status()&DEVICE_SDMMC0){
			
	    		given_device = DEVICE_SDMMC0;
		        given_file_method = PLAY_BREAK_POINT;      
		        put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
		}
		else{
        		work_mode++;
		}
	}


        put_msg_lifo(MSG_CHANGE_WORK_MODE);
        break;

    case MSG_VOL_UP:
        if (vol_change_en==0)
            break;

	sys_main_vol++;
	sys_main_vol++;
    case MSG_VOL_DOWN:
        if (vol_change_en==0)
            break;
		
	if(sys_main_vol>0)
		sys_main_vol--;

	if(sys_main_vol>MAX_MAIN_VOL){
		sys_main_vol =MAX_MAIN_VOL;
	}
	
	sys_mute_flag =0;
	
	PT2313_Config(sys_main_vol,VOL_ADJ);
	
	 if(sys_main_vol==0){
    		amp_mute(1);
	 }
	 else{
    		amp_mute(0);
	 }		
        dac_mute_control(0,1);					//调节音量时,自动UNMUTE
        write_info(MEM_VOL, sys_main_vol);
        disp_port(MENU_MAIN_VOL);
        break;
		
     case MSG_MUSIC_NEXT_EQ:
	 if(work_mode == RTC_MODE)
	 	break;

            eq_mode++;
            if (eq_mode > CLASSIC)
            {
                eq_mode = NORMAL;
            }

	    PT2313_Config(eq_mode,EQ_ADJ);
			
            set_eq(NORMAL);
            disp_port(MENU_SET_EQ);
            break;
			
    case MSG_100:
		
        if (!input_number_en)
            break;

	if (input_number > 999)
            input_number = 0;

	      key_100_flag = 0xFF;
#ifdef USE_10_PLUS_FUNC				  
	     input_number = input_number+10;
#else
	     input_number = input_number+100;
#endif
        disp_port(MENU_INPUT_NUMBER);
	break;		
	
    case MSG_0:
    case MSG_1:
    case MSG_2:
    case MSG_3:
    case MSG_4:
    case MSG_5:
    case MSG_6:
    case MSG_7:
    case MSG_8:
    case MSG_9:
		
        if (!input_number_en)
            break;		
		
	     if(key_100_flag ==0xFF){
			input_number += key;
			key_100_flag = 0xFE;
	     }
	     else if(key_100_flag ==0xFE){
		 	
			input_number += (input_number%10)*10-(input_number%10)+key;
			key_100_flag = 0x00;
	     }
	     else 
	     {
	     	     	if((input_number)>6553){
				input_number = 0x0000;			
			}
        		input_number = input_number * 10 + key;
			key_100_flag = 0x00;			
	     }
#if 1
	     if (input_number > 9999)
	     {
		       input_number = 0;			
			input_number = input_number *10 + key;
	    }
#endif
        disp_port(MENU_INPUT_NUMBER);
        break;
////////////////录音
    case MSG_REC_KEY_AT_USB:

       if(RTC_MODE == work_mode){
		break;
	}
	   
	if(RECODE_PLAY >= encode_status)
       {		
		rec_device_sel=DEVICE_UDISK;
		api_stop_encode();			
            	put_msg_lifo(MSG_REC_FIND);
	}
        else
        {
            put_msg_lifo(MSG_REC_STOP);
        }		
	break;
	
    case MSG_REC_KEY_AT_SD:

	if(RTC_MODE == work_mode){
		break;
	}
	if(RECODE_PLAY >= encode_status)
       {		
		rec_device_sel=DEVICE_SDMMC0;
       	api_stop_encode();			
            	put_msg_lifo(MSG_REC_FIND);
	}
        else
        {
            put_msg_lifo(MSG_REC_STOP);
        }	
	break;
#if 0	
    case MSG_REC_KEY:	  //录音开始和结束
	if(RECODE_PLAY >= encode_status)
        {
            put_msg_lifo(MSG_REC_FIND);

        }
        else
        {
            put_msg_lifo(MSG_REC_STOP);
        }
        break;
#endif
	case MSG_REC_PP:      //录音暂停和继续录音

        if(RECODE_WORKING == encode_status)
        {
            put_msg_lifo(MSG_REC_PAUSE);
        }
        else if(RECODE_PAUSE == encode_status)
        {

            put_msg_lifo(MSG_REC_CONTINUE);
        }
        break;

    case MSG_ENCODE_END:   //设备写err  或 设备满
	//	deg_str("MSG_ENCODE_END \n");
		if(rec_device_out)		//录音时活动设备拔出,在设备拔出那里处理,在此不做处理
		{
			rec_device_out =0;
			break;
		}

        api_stop_encode();		//停止录音
		put_msg_lifo(MSG_REC_PLAY);
		break;

	 case MSG_ENCODE_FAT_FULL:  //建文件时
	 //	deg_str("MSG_ENCODE_FAT_FULL \n");
		api_stop_encode();		//停止录音
		if(REC_MIC_MODE == work_mode)		//录音时写设备出现问题、设备满
        {
             put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
             break;   
        }
       // break_encode();
        if(AUX_MODE == work_mode)
        {
            main_menu = MENU_AUX;
        }
#if FM_MODULE 
		else if(FM_RADIO_MODE == work_mode)
        {
            main_menu = MENU_FM_MAIN;
        }
#endif
        disp_port(main_menu);
        break;
////////////////录音涉及的各种状态
    case MSG_REC_FIND:
//        if(RECODE_PLAY >= encode_status)
//        {
//            break;
//        }
#if USB_DEVICE_ENABLE
        if(USB_DEVICE_MODE == work_mode)
        {
            break;
        }
#endif
        encode_status = RECODE_INIT;
 
        if(REC_MIC_MODE != work_mode)
        {
            work_mode = REC_MIC_MODE;
            put_msg_lifo(MSG_CHANGE_WORK_MODE);
            given_device = rec_device_sel;//read_info(MEM_ACTIVE_DEV);
            break;
        }
#if 0		
        else //if((MUSIC_MODE != work_mode))
        {
            if (given_device == NO_DEVICE)
            {
                
                given_device = read_info(MEM_ACTIVE_DEV);

            }
        }      
        if( (( given_device & (~VIRTUAL_DEVICE ))  != DEVICE_SDMMC0) 
            && ((given_device & (~VIRTUAL_DEVICE)) != DEVICE_UDISK)
          )
        {
            given_device = DEVICE_SDMMC0;
        }
#endif	
        given_device = rec_device_sel;//read_info(MEM_ACTIVE_DEV);

        sys_clk_div(2);//SYSTEM_CLK_DIV2();

        put_msg_lifo(MSG_MUSIC_SELECT_NEW_DEVICE);
        break;
    case MSG_REC_START:		//开始录音

	rec_device_out = 0;
#if 0
		 rec_sys_set(0);  //0:24M   1:48M
		 sys_clk_div(2);//SYSTEM_CLK_DIV2();  //24 M
#else
	rec_sys_set(1);
	sys_clk_div(1);//SYSTEM_CLK_DIV1();	  //48 M
#endif
        //init_rec_name();

               
        device_active |= VIRTUAL_DEVICE;
        encode_device = device_active;	 //设置录音存储设备

        write_file_info(0);

        set_rec_channel(encode_channel); //设置录音通道  

        set_rec_vol(encode_vol);		 //设置录音音量

		

	if(REC_MIC_MODE == work_mode)
	{	
			kala_dac_off();
//			dac_mute_control(1,1);
#if KALAOK_FUNCTION
			dsp_set_adc_con(0);
			P3HD &=~(1<<6);
#endif
	}

        if(REC_MIC == encode_channel)
        {
            set_rec_track(TRACK_LEFT);
        }
        else
        {
            set_rec_track(TRACK_ALL);
        }
        /**/
        
        CLKGAT |= MP3CLK;// | SPIURCLK;

		
 //     CLKCON0 |= DACCLK;
 //		P3HD &=~(1<<6);
	   
        if(DEVICE_SDMMC0 == (device_active & (~VIRTUAL_DEVICE)))
        {
            CLKGAT |= USBCLK;
        }
        else if(DEVICE_UDISK == (device_active & (~VIRTUAL_DEVICE)))
        {
            CLKGAT |= SDCLK;
        }
#if ECHO_ENABLE
        if(BUSY == echo_ptr->status)
        {
            close_echo();
        }
#endif
        ///0x
        //my_memset(0x4000,0,0x787f-0x4000);
        //my_memset(0x8000,0,0x9c3f-0x8000);

//混响强度 0x400c 取值范围 0-255
//混响深度 0x4015 0x4014   取值范围 0-2048

#if ECHO_ENABLE      
        if(1 != start_encode_echo(IS_MP3))			 //开始录音
#else
        if(1 != start_encode(IS_MP3))			 //开始录音
#endif
        {
		put_msg_lifo(MSG_ENCODE_FAT_FULL);
		break;
	}
#if ECHO_ENABLE  ///<减弱冲击声,打开混响深度和强度
        delay_10ms(20);
        if( REC_MIC == ( encode_channel & 0xf ) ) ///<MIC 下有混响
        {
            set_echo(app_echo.strong, app_echo.deep);
        }
//        app_echo.strong = REC_ECHO_STRONG;
        echo_vol_set(REC_MIC_VOL);

#endif

        /*
        if(REC_MIC_MODE == work_mode)
        {
    		while(!((cmd_ctl_rec(REC_NO_OPT,0)) &  FRIST_ADC_PACKET)) //采数据前的处理
    		{
    
    		}
            delay_10ms(50);//抛弃半秒的数据
        }
		cmd_ctl_rec(ENABLE_REC_DATA,ENABLE_REC_BIT);
        */
        encode_status = RECODE_WORKING;
#if 0//FM_MODULE 
		if(FM_RADIO_MODE != work_mode)
#endif
		{
		 	main_menu = MENU_RECWORKING;//
		}
		disp_port(main_menu);
        //disp_port(MENU_REC);
        break;
    case MSG_REC_STOP:      //停止录音
        api_stop_encode();		//停止录音
        put_msg_lifo(MSG_REC_PLAY);
        break;
    case MSG_REC_PAUSE:     //暂停录音
		encode_status = RECODE_PAUSE;
	
#if  0//FM_MODULE 
		if(FM_RADIO_MODE == work_mode)
			disp_port(MENU_FM_MAIN);
		else
#endif
		{
			main_menu = MENU_REC_PAUSE;	
		  	disp_port(MENU_REC_PAUSE);
		}
		 		
        pause_encode();
        break;
    case MSG_REC_CONTINUE:  //暂停录音之后继续录音
		encode_status = RECODE_WORKING;
	
#if FM_MODULE 
		if(FM_RADIO_MODE == work_mode)
			disp_port(MENU_FM_MAIN);
		else
#endif
		{
		 	main_menu = MENU_RECWORKING;//
		    disp_port(MENU_RECWORKING);
		}
			
        continue_encode();
        break;
    case MSG_REC_PLAY:     //播放最后的录音文件

        encode_status = RECODE_PLAY;
        given_device = encode_device & (~VIRTUAL_DEVICE);

        if( (given_device != DEVICE_SDMMC0) && (given_device != DEVICE_UDISK))
        {
            given_device = DEVICE_SDMMC0;
        }
        given_device |= VIRTUAL_DEVICE;
        if((MUSIC_MODE != work_mode))
        {
            put_msg_lifo(MSG_MUSIC_NEW_DEVICE_IN);
        }
        else
        {
            put_msg_lifo(MSG_MUSIC_SELECT_NEW_DEVICE);
        }
        break;

    case MSG_MUSIC_SELECT_NEW_DEVICE:					        //重新选择设备

        res = find_device(given_device);

        if ((res == DEV_INIT_ERR) ||
                (res == NO_DEFINE_DEV))                    //指定的设备不在线,或初始化失败
        {
		
            given_device = DEVICE_AUTO_NEXT;			   //自动选择下一个设备
            put_msg_lifo(MSG_MUSIC_SELECT_NEW_DEVICE);
            break;
        }
        else if ((res == NO_EFFECTIVE_DEV) ||
                 (res == NO_DEV_ONLINE))                    //无可播放的设备
        {		
            if(RECODE_STOP != encode_status)
            {
                encode_status = RECODE_STOP;
		  if(REC_MIC_MODE == work_mode)
	         {
					put_msg_lifo(MSG_NEXT_WORKMODE);
		  }
                break;
            }
            else
            {	
                put_msg_lifo(MSG_NEXT_WORKMODE);
            }
            break;
        }
        else
        {		
            if(RECODE_PLAY < encode_status)
            {
                put_msg_lifo(MSG_REC_START);
            }
            else
            {
                if(RECODE_PLAY == encode_status)  //去播刚录好的文件
                {
                    encode_status = RECODE_STOP;
#if VIRTUAL_ENABLE
                    given_file_number = encode_filenum;
#else
                    given_file_number = encode_filenum + encode_fristfile - 1;
#endif
                    put_msg_lifo(MSG_MUSIC_PLAY_NEW_FILE);
                }
                else
                {
                    put_msg_lifo(MSG_MUSIC_SELECT_NEW_FILE);		//找到可用设备
                }
            }
            
        }
        break;



    }
}