/* Set up machine check reporting for processors with Intel style MCE: */
void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
/* Default P5 to off as its often misconnected: */
if (!mce_p5_enabled)
return;
/* Check for MCE support: */
if (!cpu_has(c, X86_FEATURE_MCE))
return;
machine_check_vector = pentium_machine_check;
/* Make sure the vector pointer is visible before we enable MCEs: */
wmb();
/* Read registers before enabling: */
rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
printk(KERN_INFO
"Intel old style machine check architecture supported.\n");
/* Enable MCE: */
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO
"Intel old style machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
/* AMD K7 machine check is Intel like */
void amd_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
if (!cpu_has(c, X86_FEATURE_MCE))
return;
machine_check_vector = k7_machine_check;
wmb();
printk (KERN_INFO "Intel machine check architecture supported.\n");
rdmsr (MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
/* Clear status for MC index 0 separately, we don't touch CTL,
* as some K7 Athlons cause spurious MCEs when its enabled. */
if (boot_cpu_data.x86 == 6) {
wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
i = 1;
} else
i = 0;
for (; i<nr_mce_banks; i++) {
wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
}
set_in_cr4 (X86_CR4_MCE);
printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
/*
* Enable the extended processor state save/restore feature
*/
static inline void xstate_enable(void)
{
#ifndef CONFIG_L4
set_in_cr4(X86_CR4_OSXSAVE);
xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
#endif /* L4 */
}
void intel_p5_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
if (!mce_p5_enabled)
return;
if (!cpu_has(c, X86_FEATURE_MCE))
return;
machine_check_vector = pentium_machine_check;
wmb();
rdmsr(MSR_IA32_P5_MC_ADDR, l, h);
rdmsr(MSR_IA32_P5_MC_TYPE, l, h);
printk(KERN_INFO
"Intel old style machine check architecture supported.\n");
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO
"Intel old style machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
static __init void xen_init_cpuid_mask(void)
{
unsigned int ax, bx, cx, dx;
cpuid_leaf1_edx_mask =
~((1 << X86_FEATURE_MCE) | /* disable MCE */
(1 << X86_FEATURE_MCA) | /* disable MCA */
(1 << X86_FEATURE_ACC)); /* thermal monitoring */
if (!xen_initial_domain())
cpuid_leaf1_edx_mask &=
~((1 << X86_FEATURE_APIC) | /* disable local APIC */
(1 << X86_FEATURE_ACPI)); /* disable ACPI */
ax = 1;
cx = 0;
xen_cpuid(&ax, &bx, &cx, &dx);
/* cpuid claims we support xsave; try enabling it to see what happens */
if (cx & (1 << (X86_FEATURE_XSAVE % 32))) {
unsigned long cr4;
set_in_cr4(X86_CR4_OSXSAVE);
cr4 = read_cr4();
if ((cr4 & X86_CR4_OSXSAVE) == 0)
cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32));
clear_in_cr4(X86_CR4_OSXSAVE);
}
}
/* Set up machine check reporting for processors with Intel style MCE */
void __init intel_p6_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
/* Check for MCE support */
if (!cpu_has(c, X86_FEATURE_MCE))
return;
/* Check for PPro style MCA */
if (!cpu_has(c, X86_FEATURE_MCA))
return;
/* Ok machine check is available */
machine_check_vector = intel_machine_check;
wmb();
printk (KERN_INFO "Intel machine check architecture supported.\n");
rdmsr (MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
/* Don't enable bank 0 on intel P6 cores, it goes bang quickly. */
for (i=1; i<nr_mce_banks; i++) {
wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
}
set_in_cr4 (X86_CR4_MCE);
printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
/* AMD K7 machine check */
int amd_k7_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
/* Check for PPro style MCA; our caller has confirmed MCE support. */
if (!cpu_has(c, X86_FEATURE_MCA))
return 0;
x86_mce_vector_register(k7_machine_check);
rdmsr (MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
/* Clear status for MC index 0 separately, we don't touch CTL,
* as some Athlons cause spurious MCEs when its enabled. */
wrmsr (MSR_IA32_MC0_STATUS, 0x0, 0x0);
for (i=1; i<nr_mce_banks; i++) {
wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
}
set_in_cr4 (X86_CR4_MCE);
printk (KERN_INFO "CPU%d: AMD K7 machine check reporting enabled.\n",
smp_processor_id());
return 1;
}
static void __init pagetable_init (void)
{
unsigned long vaddr;
pgd_t *pgd_base = swapper_pg_dir;
#ifdef CONFIG_X86_PAE
int i;
/* Init entries of the first-level page table to the zero page */
for (i = 0; i < PTRS_PER_PGD; i++)
set_pgd(pgd_base + i, __pgd(__pa(empty_zero_page) | _PAGE_PRESENT));
#endif
/* Enable PSE if available */
if (cpu_has_pse) {
set_in_cr4(X86_CR4_PSE);
}
/* Enable PGE if available */
if (cpu_has_pge) {
set_in_cr4(X86_CR4_PGE);
__PAGE_KERNEL |= _PAGE_GLOBAL;
__PAGE_KERNEL_EXEC |= _PAGE_GLOBAL;
}
kernel_physical_mapping_init(pgd_base);
remap_numa_kva();
/*
* Fixed mappings, only the page table structure has to be
* created - mappings will be set by set_fixmap():
*/
vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK;
page_table_range_init(vaddr, 0, pgd_base);
permanent_kmaps_init(pgd_base);
#ifdef CONFIG_X86_PAE
/*
* Add low memory identity-mappings - SMP needs it when
* starting up on an AP from real-mode. In the non-PAE
* case we already have these mappings through head.S.
* All user-space mappings are explicitly cleared after
* SMP startup.
*/
set_pgd(&pgd_base[0], pgd_base[USER_PTRS_PER_PGD]);
#endif
}
/* Set up machine check reporting on the Winchip C6 series */
void winchip_mcheck_init(struct cpuinfo_x86 *c)
{
u32 lo, hi;
machine_check_vector = winchip_machine_check;
wmb();
rdmsr(MSR_IDT_FCR1, lo, hi);
lo |= (1<<2); /* Enable EIERRINT (int 18 MCE) */
lo &= ~(1<<4); /* Enable MCE */
wrmsr(MSR_IDT_FCR1, lo, hi);
set_in_cr4(X86_CR4_MCE);
printk(KERN_INFO "Winchip machine check reporting enabled on CPU#0.\n");
}
/*
* Enable the extended processor state save/restore feature
*/
void __cpuinit xsave_init(void)
{
if (!cpu_has_xsave)
return;
set_in_cr4(X86_CR4_OSXSAVE);
/*
* Enable all the features that the HW is capable of
* and the Linux kernel is aware of.
*/
xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
}
/* Set up machine check reporting for processors with Intel style MCE */
void intel_p6_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
/* Check for MCE support */
if (!cpu_has(c, X86_FEATURE_MCE))
return;
/* Check for PPro style MCA */
if (!cpu_has(c, X86_FEATURE_MCA))
return;
/* Ok machine check is available */
machine_check_vector = intel_machine_check;
wmb();
printk (KERN_INFO "Intel machine check architecture supported.\n");
rdmsr (MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
/*
* Following the example in IA-32 SDM Vol 3:
* - MC0_CTL should not be written
* - Status registers on all banks should be cleared on reset
*/
for (i=1; i<nr_mce_banks; i++)
wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
for (i=0; i<nr_mce_banks; i++)
wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
set_in_cr4 (X86_CR4_MCE);
printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
}
/* AMD K8 machine check */
void amd_k8_mcheck_init(struct cpuinfo_x86 *c)
{
uint64_t value;
uint32_t i;
int cpu_nr;
machine_check_vector = k8_machine_check;
cpu_nr = smp_processor_id();
wmb();
rdmsrl(MSR_IA32_MCG_CAP, value);
if (value & MCG_CTL_P) /* Control register present ? */
wrmsrl (MSR_IA32_MCG_CTL, 0xffffffffffffffffULL);
nr_mce_banks = value & MCG_CAP_COUNT;
for (i = 0; i < nr_mce_banks; i++) {
switch (i) {
case 4: /* Northbridge */
/* Enable error reporting of all errors,
* enable error checking and
* disable sync flooding */
wrmsrl(MSR_IA32_MC4_CTL, 0x02c3c008ffffffffULL);
wrmsrl(MSR_IA32_MC4_STATUS, 0x0ULL);
break;
default:
/* Enable error reporting of all errors */
wrmsrl(MSR_IA32_MC0_CTL + 4 * i, 0xffffffffffffffffULL);
wrmsrl(MSR_IA32_MC0_STATUS + 4 * i, 0x0ULL);
break;
}
}
set_in_cr4(X86_CR4_MCE);
printk("CPU%i: AMD K8 machine check reporting enabled.\n", cpu_nr);
}
void __devinit intel_p4_mcheck_init(struct cpuinfo_x86 *c)
{
u32 l, h;
int i;
machine_check_vector = intel_machine_check;
wmb();
printk (KERN_INFO "Intel machine check architecture supported.\n");
rdmsr (MSR_IA32_MCG_CAP, l, h);
if (l & (1<<8)) /* Control register present ? */
wrmsr (MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
nr_mce_banks = l & 0xff;
for (i=0; i<nr_mce_banks; i++) {
wrmsr (MSR_IA32_MC0_CTL+4*i, 0xffffffff, 0xffffffff);
wrmsr (MSR_IA32_MC0_STATUS+4*i, 0x0, 0x0);
}
set_in_cr4 (X86_CR4_MCE);
printk (KERN_INFO "Intel machine check reporting enabled on CPU#%d.\n",
smp_processor_id());
/* Check for P4/Xeon extended MCE MSRs */
rdmsr (MSR_IA32_MCG_CAP, l, h);
if (l & (1<<9)) {/* MCG_EXT_P */
mce_num_extended_msrs = (l >> 16) & 0xff;
printk (KERN_INFO "CPU%d: Intel P4/Xeon Extended MCE MSRs (%d)"
" available\n",
smp_processor_id(), mce_num_extended_msrs);
#ifdef CONFIG_X86_MCE_P4THERMAL
/* Check for P4/Xeon Thermal monitor */
intel_init_thermal(c);
#endif
}
/*
* paging_init() sets up the page tables - note that the first 8MB are
* already mapped by head.S.
*
* This routines also unmaps the page at virtual kernel address 0, so
* that we can trap those pesky NULL-reference errors in the kernel.
*/
void __init paging_init(void)
{
#ifdef CONFIG_X86_PAE
set_nx();
if (nx_enabled)
printk("NX (Execute Disable) protection: active\n");
#endif
pagetable_init();
load_cr3(swapper_pg_dir);
#ifdef CONFIG_X86_PAE
/*
* We will bail out later - printk doesn't work right now so
* the user would just see a hanging kernel.
*/
if (cpu_has_pae)
set_in_cr4(X86_CR4_PAE);
#endif
__flush_tlb_all();
kmap_init();
}
/*
* Enable the extended processor state save/restore feature
*/
static inline void xstate_enable(void)
{
set_in_cr4(X86_CR4_OSXSAVE);
xsetbv(XCR_XFEATURE_ENABLED_MASK, pcntxt_mask);
}
void __init restart_mce(void)
{
if (old_cr4 & X86_CR4_MCE)
set_in_cr4(X86_CR4_MCE);
}
void __init trap_init(void)
{
int i;
#ifdef CONFIG_EISA
void __iomem *p = early_ioremap(0x0FFFD9, 4);
if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
EISA_bus = 1;
early_iounmap(p, 4);
#endif
set_intr_gate(0, ÷_error);
set_intr_gate_ist(1, &debug, DEBUG_STACK);
set_intr_gate_ist(2, &nmi, NMI_STACK);
/* int3 can be called from all */
set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
/* int4 can be called from all */
set_system_intr_gate(4, &overflow);
set_intr_gate(5, &bounds);
set_intr_gate(6, &invalid_op);
set_intr_gate(7, &device_not_available);
#ifdef CONFIG_X86_32
set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
#else
set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
#endif
set_intr_gate(9, &coprocessor_segment_overrun);
set_intr_gate(10, &invalid_TSS);
set_intr_gate(11, &segment_not_present);
set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
set_intr_gate(13, &general_protection);
set_intr_gate(14, &page_fault);
set_intr_gate(15, &spurious_interrupt_bug);
set_intr_gate(16, &coprocessor_error);
set_intr_gate(17, &alignment_check);
#ifdef CONFIG_X86_MCE
set_intr_gate_ist(18, &machine_check, MCE_STACK);
#endif
set_intr_gate(19, &simd_coprocessor_error);
#ifdef CONFIG_IA32_EMULATION
set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
#endif
#ifdef CONFIG_X86_32
if (cpu_has_fxsr) {
printk(KERN_INFO "Enabling fast FPU save and restore... ");
set_in_cr4(X86_CR4_OSFXSR);
printk("done.\n");
}
if (cpu_has_xmm) {
printk(KERN_INFO
"Enabling unmasked SIMD FPU exception support... ");
set_in_cr4(X86_CR4_OSXMMEXCPT);
printk("done.\n");
}
set_system_trap_gate(SYSCALL_VECTOR, &system_call);
#endif
/* Reserve all the builtin and the syscall vector: */
for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
set_bit(i, used_vectors);
#ifdef CONFIG_X86_64
set_bit(IA32_SYSCALL_VECTOR, used_vectors);
#else
set_bit(SYSCALL_VECTOR, used_vectors);
#endif
/*
* Should be a barrier for any external CPU state:
*/
cpu_init();
#ifdef CONFIG_X86_32
trap_init_hook();
#endif
}
static void cr4_pce_enable(void *arg)
{
set_in_cr4(X86_CR4_PCE);
}
