C++ (Cpp) set_max14526_ap_uart_mode 예제들

프로그래밍 언어: C++ (Cpp)

메소드/함수: set_max14526_ap_uart_mode

hotexamples.com에서의 예제들: 3

C++ (Cpp) set_max14526_ap_uart_mode - 3개의 예제가 발견되었습니다. 이것들은 오픈소스 프로젝트에서 추출된 C++ (Cpp)의 set_max14526_ap_uart_mode에 대한 실세계 최고 등급의 예제들입니다. 예제들을 평가하여 예제의 품질 향상에 도움을 줄 수 있습니다.

예제 #1

파일 보기

파일: muic_max14526.c 프로젝트: suiye223/p920-ICS-kernel

void set_max14526_muic_path(unsigned char int_stat_value)
{
	unsigned char reg_value;
	
	printk(KERN_WARNING "[MUIC] set_max14526_muic_path, int_stat_value = 0x%02x \n", int_stat_value);

	if (int_stat_value & VBUS) {
		if ((int_stat_value & IDNO) == IDNO_0010 || 
			(int_stat_value & IDNO) == IDNO_1001 ||
			(int_stat_value & IDNO) == IDNO_1010) {
			set_max14526_cp_usb_mode();
			muic_path = MUIC_CP_USB;
			charging_mode = CHARGING_FACTORY;
		} else if ((int_stat_value & IDNO) == IDNO_0100) {
			set_max14526_cp_uart_mode();
			muic_path = MUIC_CP_UART;
			charging_mode = CHARGING_FACTORY;
		} else if (int_stat_value & CHGDET) {
			muic_i2c_write_byte(muic_client,SW_CONTROL, COMP2_TO_HZ | COMN1_TO_HZ);
			muic_path = MUIC_LG_TA;
			charging_mode = CHARGING_LG_TA;
		} else {
			muic_i2c_write_byte(muic_client,SW_CONTROL, COMP2_TO_HZ | COMN1_TO_C1COMP);

			muic_mdelay(2);

			muic_i2c_read_byte(muic_client,STATUS, &reg_value);

			if (reg_value & C1COMP) {
				muic_i2c_write_byte(muic_client,SW_CONTROL, COMP2_TO_HZ | COMN1_TO_HZ);
				muic_path = MUIC_LG_TA;
				charging_mode = CHARGING_LG_TA;
			} else {
				set_max14526_ap_usb_mode();
				muic_path = MUIC_AP_USB;
				charging_mode = CHARGING_USB;
			}
		}
	} else {
		if ((int_stat_value & IDNO) == IDNO_0010) {
			set_max14526_ap_uart_mode();
			muic_path = MUIC_AP_UART;
			charging_mode = CHARGING_NONE;
		} else if ((int_stat_value & IDNO) == IDNO_0100) {
			set_max14526_cp_uart_mode();
			muic_path = MUIC_CP_UART;
			charging_mode = CHARGING_NONE;
		} else {
			muic_path = MUIC_UNKNOWN;
			charging_mode = CHARGING_NONE;
		}
	}
}

예제 #2

파일 보기

파일: muic_maxim.c 프로젝트: ARMP/android_kernel_lge_x3

void set_max14526_muic_mode(unsigned char int_stat_value)
{
	unsigned char reg_value;
	
	printk(KERN_WARNING "[MUIC] set_max14526_muic_mode, int_stat_value = 0x%02x \n", int_stat_value);

	
	if (int_stat_value & V_VBUS) {
		if ((int_stat_value & IDNO) == IDNO_0010 || 
			(int_stat_value & IDNO) == IDNO_1001 ||
			(int_stat_value & IDNO) == IDNO_1010) {
			set_max14526_cp_usb_mode();
			muic_mode = MUIC_CP_USB;
			charging_mode = CHARGING_FACTORY;
		} else if ((int_stat_value & IDNO) == IDNO_0100) {
			set_max14526_cp_uart_mode();
			muic_mode = MUIC_CP_UART;
			charging_mode = CHARGING_FACTORY;
#if defined(CONFIG_MHL_TX_SII9244)
		} else if ((int_stat_value & IDNO) == IDNO_0000) {	
			muic_set_mhl_mode_detect();
			muic_mode = MUIC_MHL;
			charging_mode = CHARGING_MHL;		
#endif
		} else if (int_stat_value & CHGDET) {
			muic_i2c_write_byte(SW_CONTROL, COMP2_TO_HZ | COMN1_TO_HZ);
			muic_mode = MUIC_LG_TA;
			charging_mode = CHARGING_LG_TA;
		} else {
			muic_i2c_write_byte(SW_CONTROL, COMP2_TO_HZ | COMN1_TO_C1COMP);

			muic_mdelay(2);

			muic_i2c_read_byte(STATUS, &reg_value);

			if (reg_value & C1COMP) {
				muic_i2c_write_byte(SW_CONTROL, COMP2_TO_HZ | COMN1_TO_HZ);
				muic_mode = MUIC_LG_TA;
				charging_mode = CHARGING_LG_TA;
			} else {
				set_max14526_ap_usb_mode();
				muic_mode = MUIC_AP_USB;
				charging_mode = CHARGING_USB;
			}
		}
	} else {
		if ((int_stat_value & IDNO) == IDNO_0010) {
			set_max14526_ap_uart_mode();
			muic_mode = MUIC_AP_UART;
			charging_mode = CHARGING_NONE;
		} else if ((int_stat_value & IDNO) == IDNO_0100) {
			set_max14526_cp_uart_mode();
			muic_mode = MUIC_CP_UART;
			charging_mode = CHARGING_NONE;
		} else {
			muic_mode = MUIC_UNKNOWN;
			charging_mode = CHARGING_NONE;
		}
	}
#if 0 
		if(retain_mode  == BOOT_CP_USB){
			set_max14526_cp_usb_mode_detect();
		}if ((int_stat_value & IDNO) == IDNO_0100 || (int_stat_value == 0x11)) { /* 0x11 for Special Test with MIC */  
			/* IDNO=0100? 130Kohm :: UART_MODE */
			set_max14526_cp_uart_mode_detect();
		} else if ((int_stat_value & IDNO ) == IDNO_0010) {
			/* IDNO=0010? 56Kohm  :: USB_MODE */
			set_max14526_ap_uart_mode_detect();
	#if defined(CONFIG_MHL_TX_SII9244)
		} else if (int_stat_value == 0x10) {
			/* IDNO=0000? 0Kohm  :: MHL_MODE */
			muic_set_mhl_mode_detect();    
	#else		
		} else if ((int_stat_value == 0x11) || (int_stat_value == 0x10)) {
	    	//Set_MAX14526_SpecialTest_Mode_Detect();
	#endif//
		} else if ((int_stat_value & IDNO) == IDNO_1010) {
			set_max14526_cp_usb_mode_detect();
		} else if (int_stat_value & CHGDET) {
			/* CHGDET=1? */
			set_max14526_charger_detect(int_stat_value);
		} else if (int_stat_value & V_VBUS) {
			/* V_VBUS=1? */

			/* Standard USB Host Detected (0x03=0x23) */
			muic_i2c_write_byte(SW_CONTROL, COMP2_TO_HZ | COMN1_TO_C1COMP);

			muic_udelay(1000);

			/* Read Status Reigster(0x05) */
			muic_i2c_read_byte(STATUS, &reg_value);

			if (reg_value & C1COMP) {
				/* Charger Detected COMP2/COMN1 to H-Z (0x03=0x24) */
				muic_i2c_write_byte(SW_CONTROL, COMP2_TO_HZ | COMN1_TO_HZ);
				/* Dedicated Charger(TA) Detected */
				muic_mode = MUIC_NA_TA;
			} else {
				/* Turn on USB switches */
	#if defined(CONFIG_MHL_TX_SII9244)
				if ((int_stat_value & IDNO ) == IDNO_0000) {
						muic_set_mhl_mode_detect(); 					
				} else {
						///* Standard USB Host Detected (0x03=0x23) */							
				set_max14526_ap_usb_mode_detect();
				muic_mode = MUIC_AP_USB;
			}
	#else
	            set_max14526_ap_usb_mode_detect();
				muic_mode = MUIC_AP_USB;
	#endif//
			}
		} else if ((int_stat_value & IDNO) == IDNO_0001) { 
			/* Vidoe Cable 24k registor Detected - No TV Attached */
			//muic_mode = DEVICE_VIDEO_CABLE_NO_LOAD;
		} else if ((int_stat_value & IDNO) == IDNO_0000 ) {
				muic_mode = MUIC_NONE;
		} else {
			/* Accessory Not Supported */
			muic_mode = MUIC_NONE;
		}
#endif
}

예제 #3

파일 보기

파일: max14526_api.c 프로젝트: JoinTheRealms/OptimusPlay

void set_max14526_muic_mode(unsigned char int_stat_value)
{
	unsigned char reg_value;
	
	printk(KERN_WARNING "[chahee.kim] set_max14526_muic_mode, "
			"int_stat_value = %x \n", int_stat_value);

	if (int_stat_value & CHGDET) {
		set_max14526_charger_mode(int_stat_value);
#ifndef CHARGER_TEST
		lge_charger_ta_mode_enable();
#endif
	} 
	else if (int_stat_value & VBUS) {
		if ((int_stat_value & IDNO) == IDNO_0101) {
			set_max14526_ap_usb_mode();
#ifndef CHARGER_TEST
			lge_charger_usb_mode_enable();
#endif
		} 
		else {
			/* Standard USB Host Detected (0x03=0x23) */
			muic_i2c_write_byte(SW_CONTROL, COMP2_TO_HZ | COMN1_TO_C1COMP);

			muic_udelay(1000);

			/* Read Status Reigster(0x05) */
			muic_i2c_read_byte(STATUS, &reg_value);

			if (reg_value & C1COMP) {
				/* Charger Detected COMP2/COMN1 to H-Z (0x03=0x24) */
				muic_i2c_write_byte(SW_CONTROL, COMP2_TO_HZ | COMN1_TO_HZ);
				/* Dedicated Charger(TA) Detected */
				muic_mode = MUIC_NA_TA;
			} 
			else {
				/* Turn on USB switches */
				set_max14526_ap_usb_mode();
#ifndef CHARGER_TEST
				lge_charger_usb_mode_enable();
#endif
			}
		}
	} 
	else if ((int_stat_value & IDNO) == IDNO_0010) {
		//set_max14526_cp_usb_mode();
		set_max14526_ap_uart_mode();
#ifndef CHARGER_TEST
		lge_charger_disable();
#endif
	}
	else if ((int_stat_value & IDNO) == IDNO_0101) {
		set_max14526_ap_uart_mode();
#ifndef CHARGER_TEST
		lge_charger_disable();
#endif
	} 
	else {
		/* Accessory Not Supported */
		muic_mode = MUIC_NONE;
		muic_init_max14526(DEFAULT);
#ifndef CHARGER_TEST
		lge_charger_disable();
#endif
	}
}