/***********************************************************************//**
* @brief Save table column into FITS file
*
* @exception GException::fits_hdu_not_found
* Specified HDU not found in FITS file.
* @exception GException::fits_error
* Error occured during writing of the column data.
*
* Save Bit (vector) column into FITS file by writing 8 Bits at once.
***************************************************************************/
void GFitsTableBitCol::save_column(void)
{
// Continue only if a FITS file is connected and data have been loaded
if (FPTR(m_fitsfile)->Fptr != NULL && m_colnum > 0 && m_data != NULL) {
// Set any pending Bit
set_pending();
// Move to the HDU
int status = 0;
status = __ffmahd(FPTR(m_fitsfile),
(FPTR(m_fitsfile)->HDUposition)+1, NULL,
&status);
if (status != 0) {
throw GException::fits_hdu_not_found(G_SAVE_COLUMN,
(FPTR(m_fitsfile)->HDUposition)+1,
status);
}
// Save data 8 Bits at once
status = __ffpcn(FPTR(m_fitsfile), __TBYTE, m_colnum, 1, 1,
m_size, m_data, m_nulval, &status);
if (status != 0) {
throw GException::fits_error(G_SAVE_COLUMN, status);
}
} // endif: FITS file was connected
// Return
return;
}
void init_pending_list(int index, long size, struct timeval time)
{
pending_list * pending = &(rcvdb[index].pending);
if (! pending->is_pending)
{
pending->is_pending = 1;
pending->deadline = time;
pending->last_write = time;
pending->writes[0].size = size;
pending->writes[0].delta = 0;
pending->current_index = 0;
pending->free_index = 1;
set_pending(index, &write_fds);
}
}
void usignal::do_sigs()
{
/*
* set off sig_pending before calling chksig ...
* otherwise user handling function might set and
* restore signals ... leading to a recursive call
* to do_sigs
*/
set_pending(0);
chksig(SIGHUP);
chksig(SIGINT);
chksig(SIGQUIT);
chksig(SIGALRM);
chksig(SIGTERM);
chksig(SIGUSR1);
chksig(SIGUSR2);
}
/***********************************************************************//**
* @brief Column data access operator
*
* @param[in] row Row of column to access.
* @param[in] inx Vector index in column row to access.
*
* Provides access to data in a column.
***************************************************************************/
bool& GFitsTableBitCol::operator()(const int& row, const int& inx)
{
// If data are not available then load them now
if (m_data == NULL) this->fetch_data();
// Set any pending Bit
set_pending();
// Get Bit
get_bit(row, inx);
// Signal that a Bit is pending. We need this here since the non-const
// operator allows changing the Bit after exiting the method, hence
// we have to signal that the actual value of 'm_bit_value' could have
// been modified and needs to be written back into the data array.
m_bit_pending = true;
// Return Bit
return m_bit_value;
}
/***********************************************************************//**
* @brief Remove rows from column
*
* @param[in] row Row after which rows should be removed (0=first row).
* @param[in] nrows Number of rows to be removed.
*
* @exception GException::fits_invalid_row
* Specified row is invalid.
* @exception GException::fits_invalid_nrows
* Invalid number of rows specified.
*
* This method removes rows from a FITS table. This implies that the column
* will be loaded into memory.
***************************************************************************/
void GFitsTableBitCol::remove(const int& row, const int& nrows)
{
// Make sure that row is valid
if (row < 0 || row >= m_length) {
throw GException::fits_invalid_row(G_REMOVE, row, m_length-1);
}
// Make sure that we don't remove beyond the limit
if (nrows < 0 || nrows > m_length-row) {
throw GException::fits_invalid_nrows(G_REMOVE, nrows, m_length-row);
}
// Continue only if there are rows to be removed
if (nrows > 0) {
// If data are not available then load them now
if (m_data == NULL) fetch_data();
// Set any pending Bit
set_pending();
// Compute new column length
int length = m_length - nrows;
// Compute total number of Bits in column
m_bits = m_number * length;
// Compute number of Bytes and Bits per row
m_bytes_per_row = (m_number > 0) ? ((m_number-1) / 8) + 1 : 0;
m_bits_per_row = m_bytes_per_row * 8;
// Compute length of memory array
m_size = m_bytes_per_row * length;
// If we have rows remaining then allocate new data to hold
// the column
if (m_size > 0) {
// Allocate new data to hold the column
unsigned char* new_data = new unsigned char[m_size];
// Compute the number of elements before the removal point,
// the number of elements that get removed, and the total
// number of elements after the removal point
int n_before = m_bytes_per_row * row;
int n_remove = m_bytes_per_row * nrows;
int n_after = m_bytes_per_row * (length - row);
// Copy data
unsigned char* src = m_data;
unsigned char* dst = new_data;
for (int i = 0; i < n_before; ++i) {
*dst++ = *src++;
}
src += n_remove;
for (int i = 0; i < n_after; ++i) {
*dst++ = *src++;
}
// Free old data
if (m_data != NULL) delete [] m_data;
// Set pointer to new data and store length
m_data = new_data;
m_length = length;
} // endif: there are still elements after removal
// ... otherwise just remove all data
else {
// Free old data
if (m_data != NULL) delete [] m_data;
// Set pointer to new data and store length
m_data = NULL;
m_length = length;
}
} // endfor: there were rows to be removed
// Return
return;
}
/***********************************************************************//**
* @brief Insert rows in column
*
* @param[in] row Row after which rows should be inserted (0=first row).
* @param[in] nrows Number of rows to be inserted.
*
* @exception GException::fits_invalid_row
* Specified row is invalid.
*
* Inserts rows into a FITS table. This implies that the column will be
* loaded into memory.
***************************************************************************/
void GFitsTableBitCol::insert(const int& row, const int& nrows)
{
// Make sure that row is valid
if (row < 0 || row > m_length) {
throw GException::fits_invalid_row(G_INSERT, row, m_length);
}
// Continue only if there are rows to be inserted
if (nrows > 0) {
// If we have no rows yet then simply set the length to the
// number of rows to be inserted
if (m_length == 0) {
m_length = nrows;
m_size = m_number * m_length;
alloc_data();
init_data();
}
// ... otherwise fetch data, allocate new data and copy over
// the existing items
else {
// If data are not available then load them now
if (m_data == NULL) fetch_data();
// Set any pending Bit
set_pending();
// Compute new column length
int length = m_length + nrows;
// Compute total number of Bits in column
m_bits = m_number * length;
// Compute number of Bytes and Bits per row
m_bytes_per_row = (m_number > 0) ? ((m_number-1) / 8) + 1 : 0;
m_bits_per_row = m_bytes_per_row * 8;
// Compute length of memory array
m_size = m_bytes_per_row * length;
// Allocate new data to hold the column
unsigned char* new_data = new unsigned char[m_size];
// Compute the number of elements before the insertion point,
// the number of elements that get inserted, and the total
// number of elements after the insertion point
int n_before = m_bytes_per_row * row;
int n_insert = m_bytes_per_row * nrows;
int n_after = m_bytes_per_row * (m_length - row);
// Copy and initialise data
unsigned char* src = m_data;
unsigned char* dst = new_data;
for (int i = 0; i < n_before; ++i) {
*dst++ = *src++;
}
for (int i = 0; i < n_insert; ++i) {
*dst++ = 0;
}
for (int i = 0; i < n_after; ++i) {
*dst++ = *src++;
}
// Free old data
if (m_data != NULL) delete [] m_data;
// Set pointer to new data and store length
m_data = new_data;
m_length = length;
} // endelse: there were already data
} // endfor: there were rows to be inserted
// Return
return;
}