C++ (Cpp) setup_low_volt_detect 예제들

예제 #1

파일: ddd.c 프로젝트: suleymancanan/RFID-PRJ-TX

//=============================================================================
void init_prog(void)
{
setup_wdt(WDT_OFF);
setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_OFF);
setup_psp(PSP_DISABLED);                                                
setup_spi(SPI_SS_DISABLED);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_16|RTCC_8_BIT);// TIMER0
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
setup_timer_3(T3_DISABLED|T3_DIV_BY_1);
setup_comparator(NC_NC_NC_NC);                                           
setup_vref(FALSE);
setup_low_volt_detect(FALSE);              
setup_oscillator(OSC_32MHZ);                                        

set_tris_a(0xFF);//7F
set_tris_b(0xFF); //FF
set_tris_c(0x94);//94
set_tris_d(0xFF); //02                                     
set_tris_e(0xF0);  //f0   
set_tris_f(0xFF);//ff
set_tris_g(0xFC); //04
output_a(0x00);
output_b(0x00);
output_c(0x00);
output_d(0x00);
output_e(0x00);
output_f(0x00);
output_g(0x00);
}

예제 #2

파일: main.c 프로젝트: abetas/ProjetElec

void main()
{


   setup_adc_ports(NO_ANALOGS);
   setup_adc(ADC_OFF);
   setup_psp(PSP_DISABLED);
   setup_spi(SPI_SS_DISABLED);
   setup_wdt(WDT_OFF);
   setup_timer_0(RTCC_INTERNAL);
   setup_timer_1(T1_DISABLED);
   setup_timer_2(T2_DISABLED,0,1);
   setup_timer_3(T3_DISABLED|T3_DIV_BY_1);
   setup_comparator(NC_NC_NC_NC);
   setup_vref(FALSE);
   enable_interrupts(INT_RDA);
   enable_interrupts(GLOBAL);
   setup_low_volt_detect(FALSE);


    //Setup_Oscillator parameter not selected from Intr Oscillotar Config tab
    //intitSerie(31);

   set_tris_a(0b00101111);
   set_tris_c(0b11111101);
   Set_tris_D(0b11100000); // port D : Led
   
   lectureTrame();
   
   while(true){
   
         if(truc=='c'){
         clignotement();
         }
         if(truc=='j'){
         johnson();
         }
         if(truc=='t'){
         compteur();
         }
         if(truc=='h'){
         chenillard();
         }
      
   }
}

예제 #3

파일: ALGFRM-RFID.c 프로젝트: suleymancanan/ALGIFARM-PRJ

//------------------------------------------------------------------------------
void init_prog(void)
{
setup_wdt(WDT_OFF);
setup_adc_ports(NO_ANALOGS|VSS_VDD);
setup_adc(ADC_OFF);
setup_psp(PSP_DISABLED);                                                
setup_spi(SPI_SS_DISABLED);
setup_timer_0(RTCC_INTERNAL|RTCC_DIV_16|RTCC_8_BIT);// TIMER0
setup_timer_1(T1_DISABLED);
setup_timer_2(T2_DISABLED,0,1);
setup_timer_3(T3_DISABLED|T3_DIV_BY_1);
setup_comparator(NC_NC_NC_NC);                                           
setup_vref(FALSE);
setup_low_volt_detect(FALSE);              
setup_oscillator(OSC_32MHZ);                                        

set_tris_a(0x00);
set_tris_b(0x24); 
set_tris_c(0x80);
set_tris_d(0x00);                                      
set_tris_e(0x15);     
set_tris_f(0x58);
set_tris_g(0x10);
output_a(0x00);
output_b(0x00);
output_c(0x00);
output_d(0x00);
output_e(0x00);
output_f(0x00);
output_g(0x00);
// RF Modul and PA/LNA activation
 
   IOpin.modulepower=0;
   IOpin.moduleCTX=1;
   IOpin.moduleCPS=0;
   IOpin.modulePWRUP=1;
   
}

예제 #4

파일: interface.c 프로젝트: frechilla/qslotracing

void main()
{
    int8    val;
    char car;

    // Initialization
    delay_ms(400);
    disable_interrupts(global);
    disable_interrupts(int_timer1);
    disable_interrupts(int_timer2);
    disable_interrupts(int_ext);
    setup_adc_ports(NO_ANALOGS|VSS_VDD);
    setup_adc(ADC_OFF|ADC_TAD_MUL_0);
    setup_spi(FALSE);
    setup_wdt(WDT_OFF);
    setup_timer_0(RTCC_INTERNAL);
    setup_timer_1(T1_INTERNAL|T1_DIV_BY_1);
    setup_timer_2(T2_DIV_BY_1,2,1);
    setup_timer_3(T3_DISABLED|T3_DIV_BY_1);
    setup_comparator(NC_NC_NC_NC);
    setup_vref(FALSE);
    setup_low_volt_detect(FALSE);
    setup_oscillator(False);
    delay_ms(400);
    
    while(1)
    {
        val = input(PIN_B0);
        if (val == 0)
        {
            output_a(0);
        }
        else if (val == 1)
        {
            output_a(255);
        }
    }
}