void __init setup_arch(char **cmdline_p)
{
stack_protections((unsigned long) &init_thread_info);
setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem);
mem_total_pages(physmem_size, iomem_size, highmem);
read_initrd();
paging_init();
strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
*cmdline_p = command_line;
setup_hostinfo(host_info, sizeof host_info);
}
int linux_main(int argc, char **argv)
{
unsigned long avail, diff;
unsigned long virtmem_size, max_physmem;
unsigned int i, add;
for (i = 1; i < argc; i++){
if((i == 1) && (argv[i][0] == ' ')) continue;
add = 1;
uml_checksetup(argv[i], &add);
if(add) add_arg(saved_command_line, argv[i]);
}
if(have_root == 0) add_arg(saved_command_line, DEFAULT_COMMAND_LINE);
mode_tt = force_tt ? 1 : !can_do_skas();
#ifndef CONFIG_MODE_TT
if (mode_tt) {
/*Since CONFIG_MODE_TT is #undef'ed, force_tt cannot be 1. So,
* can_do_skas() returned 0, and the message is correct. */
printf("Support for TT mode is disabled, and no SKAS support is present on the host.\n");
exit(1);
}
#endif
uml_start = CHOOSE_MODE_PROC(set_task_sizes_tt, set_task_sizes_skas, 0,
&host_task_size, &task_size);
/* Need to check this early because mmapping happens before the
* kernel is running.
*/
check_tmpexec();
brk_start = (unsigned long) sbrk(0);
CHOOSE_MODE_PROC(before_mem_tt, before_mem_skas, brk_start);
/* Increase physical memory size for exec-shield users
so they actually get what they asked for. This should
add zero for non-exec shield users */
diff = UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
if(diff > 1024 * 1024){
printf("Adding %ld bytes to physical memory to account for "
"exec-shield gap\n", diff);
physmem_size += UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
}
uml_physmem = uml_start;
/* Reserve up to 4M after the current brk */
uml_reserved = ROUND_4M(brk_start) + (1 << 22);
setup_machinename(system_utsname.machine);
#ifdef CONFIG_MODE_TT
argv1_begin = argv[1];
argv1_end = &argv[1][strlen(argv[1])];
#endif
highmem = 0;
iomem_size = (iomem_size + PAGE_SIZE - 1) & PAGE_MASK;
max_physmem = get_kmem_end() - uml_physmem - iomem_size - MIN_VMALLOC;
/* Zones have to begin on a 1 << MAX_ORDER page boundary,
* so this makes sure that's true for highmem
*/
max_physmem &= ~((1 << (PAGE_SHIFT + MAX_ORDER)) - 1);
if(physmem_size + iomem_size > max_physmem){
highmem = physmem_size + iomem_size - max_physmem;
physmem_size -= highmem;
#ifndef CONFIG_HIGHMEM
highmem = 0;
printf("CONFIG_HIGHMEM not enabled - physical memory shrunk "
"to %ld bytes\n", physmem_size);
#endif
}
high_physmem = uml_physmem + physmem_size;
end_iomem = high_physmem + iomem_size;
high_memory = (void *) end_iomem;
start_vm = VMALLOC_START;
setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem);
if(init_maps(physmem_size, iomem_size, highmem)){
printf("Failed to allocate mem_map for %ld bytes of physical "
"memory and %ld bytes of highmem\n", physmem_size,
highmem);
exit(1);
}
virtmem_size = physmem_size;
avail = get_kmem_end() - start_vm;
if(physmem_size > avail) virtmem_size = avail;
end_vm = start_vm + virtmem_size;
if(virtmem_size < physmem_size)
printf("Kernel virtual memory size shrunk to %ld bytes\n",
virtmem_size);
uml_postsetup();
task_protections((unsigned long) &init_thread_info);
os_flush_stdout();
return(CHOOSE_MODE(start_uml_tt(), start_uml_skas()));
}
int __init linux_main(int argc, char **argv)
{
unsigned long avail, diff;
unsigned long virtmem_size, max_physmem;
unsigned long stack;
unsigned int i;
int add;
char * mode;
for (i = 1; i < argc; i++) {
if ((i == 1) && (argv[i][0] == ' '))
continue;
add = 1;
uml_checksetup(argv[i], &add);
if (add)
add_arg(argv[i]);
}
if (have_root == 0)
add_arg(DEFAULT_COMMAND_LINE);
host_task_size = os_get_top_address();
/*
* TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps
* out
*/
task_size = host_task_size & PGDIR_MASK;
/* OS sanity checks that need to happen before the kernel runs */
os_early_checks();
can_do_skas();
if (proc_mm && ptrace_faultinfo)
mode = "SKAS3";
else
mode = "SKAS0";
printf("UML running in %s mode\n", mode);
brk_start = (unsigned long) sbrk(0);
/*
* Increase physical memory size for exec-shield users
* so they actually get what they asked for. This should
* add zero for non-exec shield users
*/
diff = UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
if (diff > 1024 * 1024) {
printf("Adding %ld bytes to physical memory to account for "
"exec-shield gap\n", diff);
physmem_size += UML_ROUND_UP(brk_start) - UML_ROUND_UP(&_end);
}
uml_physmem = (unsigned long) &__binary_start & PAGE_MASK;
/* Reserve up to 4M after the current brk */
uml_reserved = ROUND_4M(brk_start) + (1 << 22);
setup_machinename(init_utsname()->machine);
highmem = 0;
iomem_size = (iomem_size + PAGE_SIZE - 1) & PAGE_MASK;
max_physmem = TASK_SIZE - uml_physmem - iomem_size - MIN_VMALLOC;
/*
* Zones have to begin on a 1 << MAX_ORDER page boundary,
* so this makes sure that's true for highmem
*/
max_physmem &= ~((1 << (PAGE_SHIFT + MAX_ORDER)) - 1);
if (physmem_size + iomem_size > max_physmem) {
highmem = physmem_size + iomem_size - max_physmem;
physmem_size -= highmem;
#ifndef CONFIG_HIGHMEM
highmem = 0;
printf("CONFIG_HIGHMEM not enabled - physical memory shrunk "
"to %Lu bytes\n", physmem_size);
#endif
}
high_physmem = uml_physmem + physmem_size;
end_iomem = high_physmem + iomem_size;
high_memory = (void *) end_iomem;
start_vm = VMALLOC_START;
setup_physmem(uml_physmem, uml_reserved, physmem_size, highmem);
if (init_maps(physmem_size, iomem_size, highmem)) {
printf("Failed to allocate mem_map for %Lu bytes of physical "
"memory and %Lu bytes of highmem\n", physmem_size,
highmem);
exit(1);
}
virtmem_size = physmem_size;
stack = (unsigned long) argv;
stack &= ~(1024 * 1024 - 1);
avail = stack - start_vm;
if (physmem_size > avail)
virtmem_size = avail;
end_vm = start_vm + virtmem_size;
if (virtmem_size < physmem_size)
printf("Kernel virtual memory size shrunk to %lu bytes\n",
virtmem_size);
atomic_notifier_chain_register(&panic_notifier_list,
&panic_exit_notifier);
uml_postsetup();
stack_protections((unsigned long) &init_thread_info);
os_flush_stdout();
return start_uml();
}