static int
sg_cmds_process_helper(const char * leadin, int mx_di_len, int resid,
const uint8_t * sbp, int slen, bool noisy,
int verbose, int * o_sense_cat)
{
int scat, got;
bool n = false;
bool check_data_in = false;
char b[512];
scat = sg_err_category_sense(sbp, slen);
switch (scat) {
case SG_LIB_CAT_NOT_READY:
case SG_LIB_CAT_INVALID_OP:
case SG_LIB_CAT_ILLEGAL_REQ:
case SG_LIB_LBA_OUT_OF_RANGE:
case SG_LIB_CAT_ABORTED_COMMAND:
case SG_LIB_CAT_COPY_ABORTED:
case SG_LIB_CAT_DATA_PROTECT:
case SG_LIB_CAT_PROTECTION:
case SG_LIB_CAT_NO_SENSE:
case SG_LIB_CAT_MISCOMPARE:
n = false;
break;
case SG_LIB_CAT_RECOVERED:
case SG_LIB_CAT_MEDIUM_HARD:
check_data_in = true;
#if defined(__GNUC__)
#if (__GNUC__ >= 7)
__attribute__((fallthrough));
/* FALL THROUGH */
#endif
#endif
case SG_LIB_CAT_UNIT_ATTENTION:
case SG_LIB_CAT_SENSE:
default:
n = noisy;
break;
}
if (verbose || n) {
if (leadin && (strlen(leadin) > 0))
pr2ws("%s:\n", leadin);
sg_get_sense_str(NULL, sbp, slen, (verbose > 1),
sizeof(b), b);
pr2ws("%s", b);
if ((mx_di_len > 0) && (resid > 0)) {
got = mx_di_len - resid;
if ((verbose > 2) || check_data_in || (got > 0))
pr2ws(" %s requested %d bytes (data-in) but got %d "
"bytes\n", pass_through_s, mx_di_len, got);
}
}
if (o_sense_cat)
*o_sense_cat = scat;
return -2;
}
int main(int argc, char * argv[])
{
int sg_fd, k, ok, dsize, res, duration, resid, cat, got, slen;
unsigned char inq_cdb [INQ_CMD_LEN] =
{0x12, 0, 0, 0, INQ_REPLY_LEN, 0};
unsigned char tur_cdb [TUR_CMD_LEN] =
{0x00, 0, 0, 0, 0, 0};
unsigned char inqBuff[INQ_REPLY_LEN];
char * file_name = 0;
char b[512];
unsigned char sense_b[32];
int verbose = 0;
struct sg_pt_base * ptvp;
for (k = 1; k < argc; ++k) {
if (0 == strcmp("-v", argv[k]))
verbose = 1;
else if (0 == strcmp("-vv", argv[k]))
verbose = 2;
else if (0 == strcmp("-vvv", argv[k]))
verbose = 3;
else if (*argv[k] == '-') {
printf("Unrecognized switch: %s\n", argv[k]);
file_name = 0;
break;
}
else if (0 == file_name)
file_name = argv[k];
else {
printf("too many arguments\n");
file_name = 0;
break;
}
}
if (0 == file_name) {
printf("Usage: 'sg_simple5 [-v|-vv|-vvv] <device>'\n");
return 1;
}
sg_fd = scsi_pt_open_device(file_name, 1 /* ro */, 0);
/* N.B. An access mode of O_RDWR is required for some SCSI commands */
if (sg_fd < 0) {
fprintf(stderr, "error opening file: %s: %s\n",
file_name, safe_strerror(-sg_fd));
return 1;
}
dsize = sizeof(inqBuff);
ok = 0;
ptvp = construct_scsi_pt_obj(); /* one object per command */
if (NULL == ptvp) {
fprintf(stderr, "sg_simple5: out of memory\n");
return -1;
}
set_scsi_pt_cdb(ptvp, inq_cdb, sizeof(inq_cdb));
set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b));
set_scsi_pt_data_in(ptvp, inqBuff, dsize);
res = do_scsi_pt(ptvp, sg_fd, CMD_TIMEOUT_SECS, verbose);
if (res < 0) {
fprintf(stderr, " pass through os error: %s\n",
safe_strerror(-res));
goto finish_inq;
} else if (SCSI_PT_DO_BAD_PARAMS == res) {
fprintf(stderr, " bad pass through setup\n");
goto finish_inq;
} else if (SCSI_PT_DO_TIMEOUT == res) {
fprintf(stderr, " pass through timeout\n");
goto finish_inq;
}
if ((verbose > 1) && ((duration = get_scsi_pt_duration_ms(ptvp)) >= 0))
fprintf(stderr, " duration=%d ms\n", duration);
resid = get_scsi_pt_resid(ptvp);
switch ((cat = get_scsi_pt_result_category(ptvp))) {
case SCSI_PT_RESULT_GOOD:
got = dsize - resid;
if (verbose && (resid > 0))
fprintf(stderr, " requested %d bytes but "
"got %d bytes)\n", dsize, got);
break;
case SCSI_PT_RESULT_STATUS: /* other than GOOD and CHECK CONDITION */
if (verbose) {
sg_get_scsi_status_str(get_scsi_pt_status_response(ptvp),
sizeof(b), b);
fprintf(stderr, " scsi status: %s\n", b);
}
goto finish_inq;
case SCSI_PT_RESULT_SENSE:
slen = get_scsi_pt_sense_len(ptvp);
if (verbose) {
sg_get_sense_str("", sense_b, slen, (verbose > 1),
sizeof(b), b);
fprintf(stderr, "%s", b);
}
if (verbose && (resid > 0)) {
got = dsize - resid;
if ((verbose) || (got > 0))
fprintf(stderr, " requested %d bytes but "
"got %d bytes\n", dsize, got);
}
goto finish_inq;
case SCSI_PT_RESULT_TRANSPORT_ERR:
if (verbose) {
get_scsi_pt_transport_err_str(ptvp, sizeof(b), b);
fprintf(stderr, " transport: %s", b);
}
goto finish_inq;
case SCSI_PT_RESULT_OS_ERR:
if (verbose) {
get_scsi_pt_os_err_str(ptvp, sizeof(b), b);
fprintf(stderr, " os: %s", b);
}
goto finish_inq;
default:
fprintf(stderr, " unknown pass through result "
"category (%d)\n", cat);
goto finish_inq;
}
ok = 1;
finish_inq:
destruct_scsi_pt_obj(ptvp);
if (ok) { /* output result if it is available */
char * p = (char *)inqBuff;
printf("Some of the INQUIRY command's results:\n");
printf(" %.8s %.16s %.4s\n", p + 8, p + 16, p + 32);
}
ok = 0;
/* Now prepare TEST UNIT READY command */
ptvp = construct_scsi_pt_obj(); /* one object per command */
if (NULL == ptvp) {
fprintf(stderr, "sg_simple5: out of memory\n");
return -1;
}
set_scsi_pt_cdb(ptvp, tur_cdb, sizeof(tur_cdb));
set_scsi_pt_sense(ptvp, sense_b, sizeof(sense_b));
/* no data in or out */
res = do_scsi_pt(ptvp, sg_fd, CMD_TIMEOUT_SECS, verbose);
if (res < 0) {
fprintf(stderr, " pass through os error: %s\n",
safe_strerror(-res));
goto finish_inq;
} else if (SCSI_PT_DO_BAD_PARAMS == res) {
fprintf(stderr, " bad pass through setup\n");
goto finish_inq;
} else if (SCSI_PT_DO_TIMEOUT == res) {
fprintf(stderr, " pass through timeout\n");
goto finish_inq;
}
if ((verbose > 1) && ((duration = get_scsi_pt_duration_ms(ptvp)) >= 0))
fprintf(stderr, " duration=%d ms\n", duration);
resid = get_scsi_pt_resid(ptvp);
switch ((cat = get_scsi_pt_result_category(ptvp))) {
case SCSI_PT_RESULT_GOOD:
break;
case SCSI_PT_RESULT_STATUS: /* other than GOOD and CHECK CONDITION */
if (verbose) {
sg_get_scsi_status_str(get_scsi_pt_status_response(ptvp),
sizeof(b), b);
fprintf(stderr, " scsi status: %s\n", b);
}
goto finish_tur;
case SCSI_PT_RESULT_SENSE:
slen = get_scsi_pt_sense_len(ptvp);
if (verbose) {
sg_get_sense_str("", sense_b, slen, (verbose > 1),
sizeof(b), b);
fprintf(stderr, "%s", b);
}
goto finish_tur;
case SCSI_PT_RESULT_TRANSPORT_ERR:
if (verbose) {
get_scsi_pt_transport_err_str(ptvp, sizeof(b), b);
fprintf(stderr, " transport: %s", b);
}
goto finish_tur;
case SCSI_PT_RESULT_OS_ERR:
if (verbose) {
get_scsi_pt_os_err_str(ptvp, sizeof(b), b);
fprintf(stderr, " os: %s", b);
}
goto finish_tur;
default:
fprintf(stderr, " unknown pass through result "
"category (%d)\n", cat);
goto finish_tur;
}
ok = 1;
finish_tur:
destruct_scsi_pt_obj(ptvp);
if (ok)
printf("Test Unit Ready successful so unit is ready!\n");
else
printf("Test Unit Ready failed so unit may _not_ be ready!\n");
scsi_pt_close_device(sg_fd);
return 0;
}
int
main(int argc, char *argv[])
{
int k;
int ret = 0;
unsigned int ui;
size_t s;
struct opts_t opts;
char b[2048];
FILE * fp = NULL;
const char * cp;
memset(&opts, 0, sizeof(opts));
memset(b, 0, sizeof(b));
ret = process_cl(&opts, argc, argv);
if (ret != 0) {
usage();
return ret;
} else if (opts.do_help) {
usage();
return 0;
} else if (opts.do_version) {
pr2serr("version: %s\n", version_str);
return 0;
}
if (opts.do_status) {
sg_get_scsi_status_str(opts.sstatus, sizeof(b) - 1, b);
printf("SCSI status: %s\n", b);
}
if ((0 == opts.sense_len) && opts.no_space_str) {
if (opts.do_verbose > 2)
pr2serr("no_space str: %s\n", opts.no_space_str);
cp = opts.no_space_str;
for (k = 0; isxdigit(cp[k]) && isxdigit(cp[k + 1]); k += 2) {
if (1 != sscanf(cp + k, "%2x", &ui)) {
pr2serr("bad no_space hex string: %s\n", cp);
return SG_LIB_SYNTAX_ERROR;
}
opts.sense[opts.sense_len++] = (unsigned char)ui;
}
}
if ((0 == opts.sense_len) && (! opts.do_binary) && (! opts.do_file)) {
if (opts.do_status)
return 0;
pr2serr(">> Need sense data on the command line or in a file\n\n");
usage();
return SG_LIB_SYNTAX_ERROR;
}
if (opts.sense_len && (opts.do_binary || opts.do_file)) {
pr2serr(">> Need sense data on command line or in a file, not "
"both\n\n");
return SG_LIB_SYNTAX_ERROR;
}
if (opts.do_binary && opts.do_file) {
pr2serr(">> Either a binary file or a ASCII hexadecimal, file not "
"both\n\n");
return SG_LIB_SYNTAX_ERROR;
}
if (opts.do_binary) {
fp = fopen(opts.fname, "r");
if (NULL == fp) {
pr2serr("unable to open file: %s\n", opts.fname);
return SG_LIB_SYNTAX_ERROR;
}
s = fread(opts.sense, 1, MAX_SENSE_LEN, fp);
fclose(fp);
if (0 == s) {
pr2serr("read nothing from file: %s\n", opts.fname);
return SG_LIB_SYNTAX_ERROR;
}
opts.sense_len = s;
} else if (opts.do_file) {
ret = f2hex_arr(opts.fname, opts.no_space, opts.sense,
&opts.sense_len, MAX_SENSE_LEN);
if (ret) {
pr2serr("unable to decode ASCII hex from file: %s\n", opts.fname);
return SG_LIB_SYNTAX_ERROR;
}
}
if (opts.sense_len) {
if (opts.wfname) {
if ((fp = fopen(opts.wfname, "w"))) {
write2wfn(fp, &opts);
fclose(fp);
} else {
perror("open");
pr2serr("trying to write to %s\n", opts.wfname);
}
}
sg_get_sense_str(NULL, opts.sense, opts.sense_len, opts.do_verbose,
sizeof(b) - 1, b);
printf("%s\n", b);
}
return 0;
}
int main(int argc, char * argv[])
{
int c, n, len;
int verbose = 0;
int ret = 1;
char b[2048];
while (1) {
int option_index = 0;
c = getopt_long(argc, argv, "hvV", long_options,
&option_index);
if (c == -1)
break;
switch (c) {
case 'h':
case '?':
usage();
return 0;
case 'v':
++verbose;
break;
case 'V':
fprintf(stderr, "version: %s\n", version_str);
return 0;
default:
fprintf(stderr, "unrecognised switch code 0x%x ??\n", c);
usage();
return 1;
}
}
if (optind < argc) {
if (optind < argc) {
for (; optind < argc; ++optind)
fprintf(stderr, "Unexpected extra argument: %s\n",
argv[optind]);
usage();
return 1;
}
}
printf("Testing my_snprintf():\n");
sg_print_sense("desc_sense_data test", desc_sense_data, (int)sizeof(desc_sense_data), 1);
printf("\n");
#if 1
sg_get_sense_str("sg_get_sense_str", desc_sense_data, sizeof(desc_sense_data), 1, sizeof(b), b);
printf("sg_get_sense_str: strlen(b)->%zd\n", strlen(b));
printf("%s", b);
printf("\n");
#endif
b[0] = '\0';
len = sizeof(b);
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = -1;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = 0;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = 1;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = 2;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = 3;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = 4;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = 5;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = 6;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
b[0] = '\0';
len = 7;
n = my_snprintf(b, len, "%s", "test");
printf("my_snprintf(,%d,,\"test\") -> %d; strlen(b) -> %zd\n",
len, n, strlen(b));
if (strlen(b) > 0)
printf("Resulting string: %s\n", b);
return ret;
}
int main(/* int argc, char * argv[] */)
{
unsigned char err1[] = {0x72, 0x5, 0x4, 0x1, 0, 0, 0, 32,
0x2, 0x6, 0, 0, 0xc8, 0x0, 0x3, 0,
0, 0xa, 0x80, 0, 1, 2, 3, 4,
0xaa, 0xbb, 0xcc, 0xdd,
1, 0xa, 0, 0, 1, 2, 3, 4,
0xaa, 0xbb, 0xee, 0xff};
unsigned char err2[] = {0x72, SPC_SK_MEDIUM_ERROR, 0x4, 0x1, 0x80, 0, 0,
32,
0x2, 0x6, 0, 0, 0xc8, 0x0, 0x3, 0,
0, 0xa, 0x80, 0, 1, 2, 3, 4,
0xaa, 0xbb, 0xcc, 0xdd,
1, 0xa, 0, 0, 1, 2, 3, 4,
0xaa, 0xbb, 0xee, 0xff};
/* Set SDAT_OVFL */
unsigned char err3[] = {0x72, SPC_SK_NO_SENSE, 0x4, 0x1, 0, 0, 0, 8,
0x2, 0x6, 0, 0, 0xc8, 0x0, 0x3, 0};
unsigned char err4[] = {0x73, SPC_SK_COPY_ABORTED, 0x4, 0x1, 0, 0, 0, 22,
0x2, 0x6, 0, 0, 0xc8, 0x0, 0x3, 0,
0x3, 0x2, 0, 0x55,
0x5, 0x2, 0, 0x20,
0x85, 0x4, 0, 0x20, 0x33, 0x44};
/* Set Filemark, EOM, ILI and SDAT_OVFL */
unsigned char err5[] = {0xf1, 0, (0xf0 | SPC_SK_ILLEGAL_REQUEST), 0x11,
0x22, 0x33, 0x44, 0xa,
0x0, 0x0, 0, 0, 0x4, 0x1, 0, 0xcf, 0, 5,};
unsigned char err6[] = {0x72, SPC_SK_NO_SENSE, 0x4, 0x1, 0, 0, 0, 14,
0x9, 0xc, 1, 0, 0x11, 0x22, 0x66, 0x33,
0x77, 0x44, 0x88, 0x55, 0x1, 0x2};
unsigned char err7[] = {0xf1, 0, 0xe5, 0x11, 0x22, 0x33, 0x44, 0xa,
0x0, 0x0, 0x0, 0x0, 0x24, 0x1, 0xbb,
0xc9, 0x0, 0x2};
char leadin[128];
char b[2048];
int k, prev_len;
sg_print_sense("err1 test", err1, sizeof(err1), 1 /* raw_info */);
sg_print_sense("\nerr2 test", err2, sizeof(err2), 1);
sg_print_sense("\nerr3 test", err3, sizeof(err3), 1);
sg_print_sense("\nerr4 test", err4, sizeof(err4), 1);
sg_print_sense("\nerr5 test", err5, sizeof(err5), 1);
sg_print_sense("\nerr6 test", err6, sizeof(err6), 1);
sg_print_sense("\nerr7 test", err7, sizeof(err7), 1);
printf("\n\nTry different output string sizes with "
"sg_get_sense_str(err2):\n");
for (k = 1, prev_len = -1; k < 512; ++k) {
snprintf(leadin, sizeof(leadin), "blen=%d", k);
sg_get_sense_str(leadin, err2, sizeof(err2), 0, k, b);
printf("%s\n", b);
if (prev_len == (int)strlen(b))
break;
else
prev_len = strlen(b);
}
printf("\n\nTry different output string sizes with "
"sg_get_sense_str(err4):\n");
for (k = 1, prev_len = -1; k < 512; ++k) {
snprintf(leadin, sizeof(leadin), "blen=%d", k);
sg_get_sense_str(leadin, err4, sizeof(err4), 0, k, b);
printf("%s\n", b);
if (prev_len == (int)strlen(b))
break;
else
prev_len = strlen(b);
}
return 0;
}
/**
* Wraps a CDB mass storage command in the appropriate gunk to get it down
* @param handle
* @param endpoint
* @param cdb
* @param cdb_length
* @param lun
* @param flags
* @param expected_rx_size
* @return
*/
int send_usb_mass_storage_command(libusb_device_handle *handle, uint8_t endpoint_out,
uint8_t *cdb, uint8_t cdb_length,
uint8_t lun, uint8_t flags, uint32_t expected_rx_size) {
DLOG("Sending usb m-s cmd: cdblen:%d, rxsize=%d\n", cdb_length, expected_rx_size);
dump_CDB_command(cdb, cdb_length);
static uint32_t tag;
if (tag == 0) {
tag = 1;
}
int try = 0;
int ret = 0;
int real_transferred;
int i = 0;
uint8_t c_buf[STLINK_SG_SIZE];
// tag is allegedly ignored... TODO - verify
c_buf[i++] = 'U';
c_buf[i++] = 'S';
c_buf[i++] = 'B';
c_buf[i++] = 'C';
write_uint32(&c_buf[i], tag);
uint32_t this_tag = tag++;
write_uint32(&c_buf[i+4], expected_rx_size);
i+= 8;
c_buf[i++] = flags;
c_buf[i++] = lun;
c_buf[i++] = cdb_length;
// Now the actual CDB request
assert(cdb_length <= CDB_SL);
memcpy(&(c_buf[i]), cdb, cdb_length);
int sending_length = STLINK_SG_SIZE;
DLOG("sending length set to: %d\n", sending_length);
// send....
do {
DLOG("attempting tx...\n");
ret = libusb_bulk_transfer(handle, endpoint_out, c_buf, sending_length,
&real_transferred, SG_TIMEOUT_MSEC);
if (ret == LIBUSB_ERROR_PIPE) {
libusb_clear_halt(handle, endpoint_out);
}
try++;
} while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
if (ret != LIBUSB_SUCCESS) {
WLOG("sending failed: %d\n", ret);
return -1;
}
DLOG("Actually sent: %d, returning tag: %d\n", real_transferred, tag);
return this_tag;
}
/**
* Straight from stm8 stlink code...
* @param handle
* @param endpoint_in
* @param endpoint_out
*/
static void
get_sense(libusb_device_handle *handle, uint8_t endpoint_in, uint8_t endpoint_out)
{
DLOG("Fetching sense...\n");
uint8_t cdb[16];
memset(cdb, 0, sizeof(cdb));
#define REQUEST_SENSE 0x03
#define REQUEST_SENSE_LENGTH 18
cdb[0] = REQUEST_SENSE;
cdb[4] = REQUEST_SENSE_LENGTH;
uint32_t tag = send_usb_mass_storage_command(handle, endpoint_out, cdb, sizeof(cdb), 0,
LIBUSB_ENDPOINT_IN, REQUEST_SENSE_LENGTH);
if (tag == 0) {
WLOG("refusing to send request sense with tag 0\n");
return;
}
unsigned char sense[REQUEST_SENSE_LENGTH];
int transferred;
int ret;
int try = 0;
do {
ret = libusb_bulk_transfer(handle, endpoint_in, sense, sizeof(sense),
&transferred, SG_TIMEOUT_MSEC);
if (ret == LIBUSB_ERROR_PIPE) {
libusb_clear_halt(handle, endpoint_in);
}
try++;
} while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
if (ret != LIBUSB_SUCCESS) {
WLOG("receiving sense failed: %d\n", ret);
return;
}
if (transferred != sizeof(sense)) {
WLOG("received unexpected amount of sense: %d != %d\n", transferred, sizeof(sense));
}
uint32_t received_tag;
int status = get_usb_mass_storage_status(handle, endpoint_in, &received_tag);
if (status != 0) {
WLOG("receiving sense failed with status: %02x\n", status);
return;
}
if (sense[0] != 0x70 && sense[0] != 0x71) {
WLOG("No sense data\n");
} else {
WLOG("Sense KCQ: %02X %02X %02X\n", sense[2] & 0x0f, sense[12], sense[13]);
}
}
//TODO rewrite/cleanup, save the error in sl
#if FINISHED_WITH_SG
static void stlink_confirm_inq(stlink_t *stl, struct sg_pt_base *ptvp) {
struct stlink_libsg *sl = stl->backend_data;
const int e = sl->do_scsi_pt_err;
if (e < 0) {
fprintf(stderr, "scsi_pt error: pass through os error: %s\n",
safe_strerror(-e));
return;
} else if (e == SCSI_PT_DO_BAD_PARAMS) {
fprintf(stderr, "scsi_pt error: bad pass through setup\n");
return;
} else if (e == SCSI_PT_DO_TIMEOUT) {
fprintf(stderr, " pass through timeout\n");
return;
}
const int duration = get_scsi_pt_duration_ms(ptvp);
if ((stl->verbose > 1) && (duration >= 0))
DLOG(" duration=%d ms\n", duration);
// XXX stlink fw sends broken residue, so ignore it and use the known q_len
// "usb-storage quirks=483:3744:r"
// forces residue to be ignored and calculated, but this causes aboard if
// data_len = 0 and by some other data_len values.
const int resid = get_scsi_pt_resid(ptvp);
const int dsize = stl->q_len - resid;
const int cat = get_scsi_pt_result_category(ptvp);
char buf[512];
unsigned int slen;
switch (cat) {
case SCSI_PT_RESULT_GOOD:
if (stl->verbose && (resid > 0))
DLOG(" notice: requested %d bytes but "
"got %d bytes, ignore [broken] residue = %d\n",
stl->q_len, dsize, resid);
break;
case SCSI_PT_RESULT_STATUS:
if (stl->verbose) {
sg_get_scsi_status_str(
get_scsi_pt_status_response(ptvp), sizeof (buf),
buf);
DLOG(" scsi status: %s\n", buf);
}
return;
case SCSI_PT_RESULT_SENSE:
slen = get_scsi_pt_sense_len(ptvp);
if (stl->verbose) {
sg_get_sense_str("", sl->sense_buf, slen, (stl->verbose
> 1), sizeof (buf), buf);
DLOG("%s", buf);
}
if (stl->verbose && (resid > 0)) {
if ((stl->verbose) || (stl->q_len > 0))
DLOG(" requested %d bytes but "
"got %d bytes\n", stl->q_len, dsize);
}
return;
case SCSI_PT_RESULT_TRANSPORT_ERR:
if (stl->verbose) {
get_scsi_pt_transport_err_str(ptvp, sizeof (buf), buf);
// http://tldp.org/HOWTO/SCSI-Generic-HOWTO/x291.html
// These codes potentially come from the firmware on a host adapter
// or from one of several hosts that an adapter driver controls.
// The 'host_status' field has the following values:
// [0x07] Internal error detected in the host adapter.
// This may not be fatal (and the command may have succeeded).
DLOG(" transport: %s", buf);
}
return;
case SCSI_PT_RESULT_OS_ERR:
if (stl->verbose) {
get_scsi_pt_os_err_str(ptvp, sizeof (buf), buf);
DLOG(" os: %s", buf);
}
return;
default:
fprintf(stderr, " unknown pass through result "
"category (%d)\n", cat);
}
}
#endif
/**
* Just send a buffer on an endpoint, no questions asked.
* Handles repeats, and time outs. Also handles reading status reports and sense
* @param handle libusb device *
* @param endpoint_out sends
* @param endpoint_in used to read status reports back in
* @param cbuf what to send
* @param length how much to send
* @return number of bytes actually sent, or -1 for failures.
*/
int send_usb_data_only(libusb_device_handle *handle, unsigned char endpoint_out,
unsigned char endpoint_in, unsigned char *cbuf, unsigned int length) {
int ret;
int real_transferred;
int try;
do {
DLOG("attempting tx...\n");
ret = libusb_bulk_transfer(handle, endpoint_out, cbuf, length,
&real_transferred, SG_TIMEOUT_MSEC);
if (ret == LIBUSB_ERROR_PIPE) {
libusb_clear_halt(handle, endpoint_out);
}
try++;
} while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
if (ret != LIBUSB_SUCCESS) {
WLOG("sending failed: %d\n", ret);
return -1;
}
DLOG("Actually sent: %d\n", real_transferred);
// now, swallow up the status, so that things behave nicely...
uint32_t received_tag;
// -ve is for my errors, 0 is good, +ve is libusb sense status bytes
int status = get_usb_mass_storage_status(handle, endpoint_in, &received_tag);
if (status < 0) {
WLOG("receiving status failed: %d\n", status);
return -1;
}
if (status != 0) {
WLOG("receiving status not passed :(: %02x\n", status);
}
if (status == 1) {
get_sense(handle, endpoint_in, endpoint_out);
return -1;
}
return real_transferred;
}
int stlink_q(stlink_t *sl) {
struct stlink_libsg* sg = sl->backend_data;
//uint8_t cdb_len = 6; // FIXME varies!!!
uint8_t cdb_len = 10; // FIXME varies!!!
uint8_t lun = 0; // always zero...
uint32_t tag = send_usb_mass_storage_command(sg->usb_handle, sg->ep_req,
sg->cdb_cmd_blk, cdb_len, lun, LIBUSB_ENDPOINT_IN, sl->q_len);
// now wait for our response...
// length copied from stlink-usb...
int rx_length = sl->q_len;
int try = 0;
int real_transferred;
int ret;
if (rx_length > 0) {
do {
DLOG("attempting rx\n");
ret = libusb_bulk_transfer(sg->usb_handle, sg->ep_rep, sl->q_buf, rx_length,
&real_transferred, SG_TIMEOUT_MSEC);
if (ret == LIBUSB_ERROR_PIPE) {
libusb_clear_halt(sg->usb_handle, sg->ep_req);
}
try++;
} while ((ret == LIBUSB_ERROR_PIPE) && (try < 3));
if (ret != LIBUSB_SUCCESS) {
WLOG("Receiving failed: %d\n", ret);
return -1;
}
if (real_transferred != rx_length) {
WLOG("received unexpected amount: %d != %d\n", real_transferred, rx_length);
}
}
uint32_t received_tag;
// -ve is for my errors, 0 is good, +ve is libusb sense status bytes
int status = get_usb_mass_storage_status(sg->usb_handle, sg->ep_rep, &received_tag);
if (status < 0) {
WLOG("receiving status failed: %d\n", status);
return -1;
}
if (status != 0) {
WLOG("receiving status not passed :(: %02x\n", status);
}
if (status == 1) {
get_sense(sg->usb_handle, sg->ep_rep, sg->ep_req);
return -1;
}
if (received_tag != tag) {
WLOG("received tag %d but expected %d\n", received_tag, tag);
//return -1;
}
if (rx_length > 0 && real_transferred != rx_length) {
return -1;
}
return 0;
DLOG("Actually received: %d\n", real_transferred);
#if FINISHED_WITH_SG
// Get control command descriptor of scsi structure,
// (one object per command!!)
struct sg_pt_base *ptvp = construct_scsi_pt_obj();
if (NULL == ptvp) {
fprintf(stderr, "construct_scsi_pt_obj: out of memory\n");
return;
}
set_scsi_pt_cdb(ptvp, sg->cdb_cmd_blk, sizeof (sg->cdb_cmd_blk));
// set buffer for sense (error information) data
set_scsi_pt_sense(ptvp, sg->sense_buf, sizeof (sg->sense_buf));
// Set a buffer to be used for data transferred from device
if (sg->q_data_dir == Q_DATA_IN) {
//clear_buf(sl);
set_scsi_pt_data_in(ptvp, sl->q_buf, sl->q_len);
} else {
set_scsi_pt_data_out(ptvp, sl->q_buf, sl->q_len);
}
// Executes SCSI command (or at least forwards it to lower layers).
sg->do_scsi_pt_err = do_scsi_pt(ptvp, sg->sg_fd, SG_TIMEOUT_SEC,
sl->verbose);
// check for scsi errors
stlink_confirm_inq(sl, ptvp);
// TODO recycle: clear_scsi_pt_obj(struct sg_pt_base * objp);
destruct_scsi_pt_obj(ptvp);
#endif
}
// TODO thinking, cleanup
void stlink_stat(stlink_t *stl, char *txt) {
if (stl->q_len <= 0)
return;
stlink_print_data(stl);
switch (stl->q_buf[0]) {
case STLINK_OK:
DLOG(" %s: ok\n", txt);
return;
case STLINK_FALSE:
DLOG(" %s: false\n", txt);
return;
default:
DLOG(" %s: unknown\n", txt);
}
}
void _stlink_sg_version(stlink_t *stl) {
struct stlink_libsg *sl = stl->backend_data;
DLOG("\n*** stlink_version ***\n");
clear_cdb(sl);
sl->cdb_cmd_blk[0] = STLINK_GET_VERSION;
stl->q_len = 6;
sl->q_addr = 0;
stlink_q(stl);
// HACK use my own private version right now...
}
// Get stlink mode:
// STLINK_DEV_DFU_MODE || STLINK_DEV_MASS_MODE || STLINK_DEV_DEBUG_MODE
// usb dfu || usb mass || jtag or swd
int _stlink_sg_current_mode(stlink_t *stl) {
struct stlink_libsg *sl = stl->backend_data;
clear_cdb(sl);
sl->cdb_cmd_blk[0] = STLINK_GET_CURRENT_MODE;
stl->q_len = 2;
sl->q_addr = 0;
stlink_q(stl);
return stl->q_buf[0];
}
// Exit the mass mode and enter the swd debug mode.
void _stlink_sg_enter_swd_mode(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_ENTER;
sg->cdb_cmd_blk[2] = STLINK_DEBUG_ENTER_SWD;
sl->q_len = 0; // >0 -> aboard
stlink_q(sl);
}
// Exit the mass mode and enter the jtag debug mode.
// (jtag is disabled in the discovery's stlink firmware)
void _stlink_sg_enter_jtag_mode(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
DLOG("\n*** stlink_enter_jtag_mode ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_ENTER;
sg->cdb_cmd_blk[2] = STLINK_DEBUG_ENTER_JTAG;
sl->q_len = 0;
stlink_q(sl);
}
// XXX kernel driver performs reset, the device temporally disappears
void _stlink_sg_exit_dfu_mode(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
DLOG("\n*** stlink_exit_dfu_mode ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[0] = STLINK_DFU_COMMAND;
sg->cdb_cmd_blk[1] = STLINK_DFU_EXIT;
sl->q_len = 0; // ??
stlink_q(sl);
/*
[135121.844564] sd 19:0:0:0: [sdb] Unhandled error code
[135121.844569] sd 19:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
[135121.844574] sd 19:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 10 00 00 00 08 00
[135121.844584] end_request: I/O error, dev sdb, sector 4096
[135121.844590] Buffer I/O error on device sdb, logical block 512
[135130.122567] usb 6-1: reset full speed USB device using uhci_hcd and address 7
[135130.274551] usb 6-1: device firmware changed
[135130.274618] usb 6-1: USB disconnect, address 7
[135130.275186] VFS: busy inodes on changed media or resized disk sdb
[135130.275424] VFS: busy inodes on changed media or resized disk sdb
[135130.286758] VFS: busy inodes on changed media or resized disk sdb
[135130.292796] VFS: busy inodes on changed media or resized disk sdb
[135130.301481] VFS: busy inodes on changed media or resized disk sdb
[135130.304316] VFS: busy inodes on changed media or resized disk sdb
[135130.431113] usb 6-1: new full speed USB device using uhci_hcd and address 8
[135130.629444] usb-storage 6-1:1.0: Quirks match for vid 0483 pid 3744: 102a1
[135130.629492] scsi20 : usb-storage 6-1:1.0
[135131.625600] scsi 20:0:0:0: Direct-Access STM32 PQ: 0 ANSI: 0
[135131.627010] sd 20:0:0:0: Attached scsi generic sg2 type 0
[135131.633603] sd 20:0:0:0: [sdb] 64000 512-byte logical blocks: (32.7 MB/31.2 MiB)
[135131.633613] sd 20:0:0:0: [sdb] Assuming Write Enabled
[135131.633620] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[135131.640584] sd 20:0:0:0: [sdb] Assuming Write Enabled
[135131.640592] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[135131.640609] sdb:
[135131.652634] sd 20:0:0:0: [sdb] Assuming Write Enabled
[135131.652639] sd 20:0:0:0: [sdb] Assuming drive cache: write through
[135131.652645] sd 20:0:0:0: [sdb] Attached SCSI removable disk
[135131.671536] sd 20:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[135131.671548] sd 20:0:0:0: [sdb] Sense Key : Illegal Request [current]
[135131.671553] sd 20:0:0:0: [sdb] Add. Sense: Logical block address out of range
[135131.671560] sd 20:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 f9 80 00 00 08 00
[135131.671570] end_request: I/O error, dev sdb, sector 63872
[135131.671575] Buffer I/O error on device sdb, logical block 7984
[135131.678527] sd 20:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[135131.678532] sd 20:0:0:0: [sdb] Sense Key : Illegal Request [current]
[135131.678537] sd 20:0:0:0: [sdb] Add. Sense: Logical block address out of range
[135131.678542] sd 20:0:0:0: [sdb] CDB: Read(10): 28 00 00 00 f9 80 00 00 08 00
[135131.678551] end_request: I/O error, dev sdb, sector 63872
...
[135131.853565] end_request: I/O error, dev sdb, sector 4096
*/
}
void _stlink_sg_core_id(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_READCOREID;
sl->q_len = 4;
sg->q_addr = 0;
stlink_q(sl);
sl->core_id = read_uint32(sl->q_buf, 0);
}
// Arm-core reset -> halted state.
void _stlink_sg_reset(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_RESETSYS;
sl->q_len = 2;
sg->q_addr = 0;
stlink_q(sl);
stlink_stat(sl, "core reset");
}
// Arm-core status: halted or running.
void _stlink_sg_status(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
DLOG("\n*** stlink_status ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_GETSTATUS;
sl->q_len = 2;
sg->q_addr = 0;
stlink_q(sl);
}
// Force the core into the debug mode -> halted state.
void _stlink_sg_force_debug(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
DLOG("\n*** stlink_force_debug ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_FORCEDEBUG;
sl->q_len = 2;
sg->q_addr = 0;
stlink_q(sl);
stlink_stat(sl, "force debug");
}
// Read all arm-core registers.
void _stlink_sg_read_all_regs(stlink_t *sl, reg *regp) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_READALLREGS;
sl->q_len = 84;
sg->q_addr = 0;
stlink_q(sl);
stlink_print_data(sl);
// TODO - most of this should be re-extracted up....
// 0-3 | 4-7 | ... | 60-63 | 64-67 | 68-71 | 72-75 | 76-79 | 80-83
// r0 | r1 | ... | r15 | xpsr | main_sp | process_sp | rw | rw2
for (int i = 0; i < 16; i++) {
regp->r[i] = read_uint32(sl->q_buf, 4 * i);
if (sl->verbose > 1)
DLOG("r%2d = 0x%08x\n", i, regp->r[i]);
}
regp->xpsr = read_uint32(sl->q_buf, 64);
regp->main_sp = read_uint32(sl->q_buf, 68);
regp->process_sp = read_uint32(sl->q_buf, 72);
regp->rw = read_uint32(sl->q_buf, 76);
regp->rw2 = read_uint32(sl->q_buf, 80);
if (sl->verbose < 2)
return;
DLOG("xpsr = 0x%08x\n", regp->xpsr);
DLOG("main_sp = 0x%08x\n", regp->main_sp);
DLOG("process_sp = 0x%08x\n", regp->process_sp);
DLOG("rw = 0x%08x\n", regp->rw);
DLOG("rw2 = 0x%08x\n", regp->rw2);
}
// Read an arm-core register, the index must be in the range 0..20.
// 0 | 1 | ... | 15 | 16 | 17 | 18 | 19 | 20
// r0 | r1 | ... | r15 | xpsr | main_sp | process_sp | rw | rw2
void _stlink_sg_read_reg(stlink_t *sl, int r_idx, reg *regp) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_READREG;
sg->cdb_cmd_blk[2] = r_idx;
sl->q_len = 4;
sg->q_addr = 0;
stlink_q(sl);
// 0 | 1 | ... | 15 | 16 | 17 | 18 | 19 | 20
// 0-3 | 4-7 | ... | 60-63 | 64-67 | 68-71 | 72-75 | 76-79 | 80-83
// r0 | r1 | ... | r15 | xpsr | main_sp | process_sp | rw | rw2
stlink_print_data(sl);
uint32_t r = read_uint32(sl->q_buf, 0);
DLOG("r_idx (%2d) = 0x%08x\n", r_idx, r);
switch (r_idx) {
case 16:
regp->xpsr = r;
break;
case 17:
regp->main_sp = r;
break;
case 18:
regp->process_sp = r;
break;
case 19:
regp->rw = r; //XXX ?(primask, basemask etc.)
break;
case 20:
regp->rw2 = r; //XXX ?(primask, basemask etc.)
break;
default:
regp->r[r_idx] = r;
}
}
// Write an arm-core register. Index:
// 0 | 1 | ... | 15 | 16 | 17 | 18 | 19 | 20
// r0 | r1 | ... | r15 | xpsr | main_sp | process_sp | rw | rw2
void _stlink_sg_write_reg(stlink_t *sl, uint32_t reg, int idx) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_WRITEREG;
// 2: reg index
// 3-6: reg content
sg->cdb_cmd_blk[2] = idx;
write_uint32(sg->cdb_cmd_blk + 3, reg);
sl->q_len = 2;
sg->q_addr = 0;
stlink_q(sl);
stlink_stat(sl, "write reg");
}
// Write a register of the debug module of the core.
// XXX ?(atomic writes)
// TODO test
void stlink_write_dreg(stlink_t *sl, uint32_t reg, uint32_t addr) {
struct stlink_libsg *sg = sl->backend_data;
DLOG("\n*** stlink_write_dreg ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_WRITEDEBUGREG;
// 2-5: address of reg of the debug module
// 6-9: reg content
write_uint32(sg->cdb_cmd_blk + 2, addr);
write_uint32(sg->cdb_cmd_blk + 6, reg);
sl->q_len = 2;
sg->q_addr = addr;
stlink_q(sl);
stlink_stat(sl, "write debug reg");
}
// Force the core exit the debug mode.
void _stlink_sg_run(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
DLOG("\n*** stlink_run ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_RUNCORE;
sl->q_len = 2;
sg->q_addr = 0;
stlink_q(sl);
stlink_stat(sl, "run core");
}
// Step the arm-core.
void _stlink_sg_step(stlink_t *sl) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_STEPCORE;
sl->q_len = 2;
sg->q_addr = 0;
stlink_q(sl);
stlink_stat(sl, "step core");
}
// TODO test
// see Cortex-M3 Technical Reference Manual
// TODO make delegate!
void stlink_set_hw_bp(stlink_t *sl, int fp_nr, uint32_t addr, int fp) {
DLOG("\n*** stlink_set_hw_bp ***\n");
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_SETFP;
// 2:The number of the flash patch used to set the breakpoint
// 3-6: Address of the breakpoint (LSB)
// 7: FP_ALL (0x02) / FP_UPPER (0x01) / FP_LOWER (0x00)
sl->q_buf[2] = fp_nr;
write_uint32(sl->q_buf, addr);
sl->q_buf[7] = fp;
sl->q_len = 2;
stlink_q(sl);
stlink_stat(sl, "set flash breakpoint");
}
// TODO test
// TODO make delegate!
void stlink_clr_hw_bp(stlink_t *sl, int fp_nr) {
struct stlink_libsg *sg = sl->backend_data;
DLOG("\n*** stlink_clr_hw_bp ***\n");
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_CLEARFP;
sg->cdb_cmd_blk[2] = fp_nr;
sl->q_len = 2;
stlink_q(sl);
stlink_stat(sl, "clear flash breakpoint");
}
// Read a "len" bytes to the sl->q_buf from the memory, max 6kB (6144 bytes)
void _stlink_sg_read_mem32(stlink_t *sl, uint32_t addr, uint16_t len) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_READMEM_32BIT;
// 2-5: addr
// 6-7: len
write_uint32(sg->cdb_cmd_blk + 2, addr);
write_uint16(sg->cdb_cmd_blk + 6, len);
// data_in 0-0x40-len
// !!! len _and_ q_len must be max 6k,
// i.e. >1024 * 6 = 6144 -> aboard)
// !!! if len < q_len: 64*k, 1024*n, n=1..5 -> aboard
// (broken residue issue)
sl->q_len = len;
sg->q_addr = addr;
stlink_q(sl);
stlink_print_data(sl);
}
// Write a "len" bytes from the sl->q_buf to the memory, max 64 Bytes.
void _stlink_sg_write_mem8(stlink_t *sl, uint32_t addr, uint16_t len) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_WRITEMEM_8BIT;
// 2-5: addr
// 6-7: len (>0x40 (64) -> aboard)
write_uint32(sg->cdb_cmd_blk + 2, addr);
write_uint16(sg->cdb_cmd_blk + 6, len);
// this sends the command...
send_usb_mass_storage_command(sg->usb_handle, sg->ep_req, sg->cdb_cmd_blk, CDB_SL, 0, 0, 0);
// This sends the data...
send_usb_data_only(sg->usb_handle, sg->ep_req, sg->ep_rep, sl->q_buf, len);
stlink_print_data(sl);
}
// Write a "len" bytes from the sl->q_buf to the memory, max Q_BUF_LEN bytes.
void _stlink_sg_write_mem32(stlink_t *sl, uint32_t addr, uint16_t len) {
struct stlink_libsg *sg = sl->backend_data;
clear_cdb(sg);
sg->cdb_cmd_blk[1] = STLINK_DEBUG_WRITEMEM_32BIT;
// 2-5: addr
// 6-7: len "unlimited"
write_uint32(sg->cdb_cmd_blk + 2, addr);
write_uint16(sg->cdb_cmd_blk + 6, len);
// this sends the command...
send_usb_mass_storage_command(sg->usb_handle, sg->ep_req, sg->cdb_cmd_blk, CDB_SL, 0, 0, 0);
// This sends the data...
send_usb_data_only(sg->usb_handle, sg->ep_req, sg->ep_rep, sl->q_buf, len);
stlink_print_data(sl);
}
#if 0 /* not working */
static int write_flash_mem16
(struct stlink* sl, uint32_t addr, uint16_t val) {
/* half word writes */
if (addr % 2) return -1;
/* unlock if locked */
unlock_flash_if(sl);
/* set flash programming chosen bit */
set_flash_cr_pg(sl);
write_uint16(sl->q_buf, val);
stlink_write_mem16(sl, addr, 2);
/* wait for non business */
wait_flash_busy(sl);
lock_flash(sl);
/* check the programmed value back */
stlink_read_mem16(sl, addr, 2);
if (*(const uint16_t*) sl->q_buf != val) {
/* values differ at i * sizeof(uint16_t) */
return -1;
}
/* success */
return 0;
}
#endif /* not working */
// Exit the jtag or swd mode and enter the mass mode.
void _stlink_sg_exit_debug_mode(stlink_t *stl) {
if (stl) {
struct stlink_libsg* sl = stl->backend_data;
clear_cdb(sl);
sl->cdb_cmd_blk[1] = STLINK_DEBUG_EXIT;
stl->q_len = 0; // >0 -> aboard
stlink_q(stl);
}
}
// 1) open a sg device, switch the stlink from dfu to mass mode
// 2) wait 5s until the kernel driver stops reseting the broken device
// 3) reopen the device
// 4) the device driver is now ready for a switch to jtag/swd mode
// TODO thinking, better error handling, wait until the kernel driver stops reseting the plugged-in device
stlink_backend_t _stlink_sg_backend = {
_stlink_sg_close,
_stlink_sg_exit_debug_mode,
_stlink_sg_enter_swd_mode,
_stlink_sg_enter_jtag_mode,
_stlink_sg_exit_dfu_mode,
_stlink_sg_core_id,
_stlink_sg_reset,
_stlink_sg_run,
_stlink_sg_status,
_stlink_sg_version,
_stlink_sg_read_mem32,
_stlink_sg_write_mem32,
_stlink_sg_write_mem8,
_stlink_sg_read_all_regs,
_stlink_sg_read_reg,
_stlink_sg_write_reg,
_stlink_sg_step,
_stlink_sg_current_mode,
_stlink_sg_force_debug
};
static stlink_t* stlink_open(const int verbose) {
stlink_t *sl = malloc(sizeof (stlink_t));
memset(sl, 0, sizeof(stlink_t));
struct stlink_libsg *slsg = malloc(sizeof (struct stlink_libsg));
if (sl == NULL || slsg == NULL) {
WLOG("Couldn't malloc stlink and stlink_sg structures out of memory!\n");
return NULL;
}
if (libusb_init(&(slsg->libusb_ctx))) {
WLOG("failed to init libusb context, wrong version of libraries?\n");
free(sl);
free(slsg);
return NULL;
}
libusb_set_debug(slsg->libusb_ctx, 3);
slsg->usb_handle = libusb_open_device_with_vid_pid(slsg->libusb_ctx, USB_ST_VID, USB_STLINK_PID);
if (slsg->usb_handle == NULL) {
WLOG("Failed to find an stlink v1 by VID:PID\n");
libusb_close(slsg->usb_handle);
free(sl);
free(slsg);
return NULL;
}
// TODO
// Could read the interface config descriptor, and assert lots of the assumptions
// assumption: numInterfaces is always 1...
if (libusb_kernel_driver_active(slsg->usb_handle, 0) == 1) {
int r = libusb_detach_kernel_driver(slsg->usb_handle, 0);
if (r < 0) {
WLOG("libusb_detach_kernel_driver(() error %s\n", strerror(-r));
libusb_close(slsg->usb_handle);
free(sl);
free(slsg);
return NULL;
}
DLOG("Kernel driver was successfully detached\n");
}
int config;
if (libusb_get_configuration(slsg->usb_handle, &config)) {
/* this may fail for a previous configured device */
WLOG("libusb_get_configuration()\n");
libusb_close(slsg->usb_handle);
free(sl);
free(slsg);
return NULL;
}
// assumption: bConfigurationValue is always 1
if (config != 1) {
WLOG("Your stlink got into a real weird configuration, trying to fix it!\n");
DLOG("setting new configuration (%d -> 1)\n", config);
if (libusb_set_configuration(slsg->usb_handle, 1)) {
/* this may fail for a previous configured device */
WLOG("libusb_set_configuration() failed\n");
libusb_close(slsg->usb_handle);
free(sl);
free(slsg);
return NULL;
}
}
if (libusb_claim_interface(slsg->usb_handle, 0)) {
WLOG("libusb_claim_interface() failed\n");
libusb_close(slsg->usb_handle);
free(sl);
free(slsg);
return NULL;
}
// assumption: endpoint config is fixed mang. really.
slsg->ep_rep = 1 /* ep rep */ | LIBUSB_ENDPOINT_IN;
slsg->ep_req = 2 /* ep req */ | LIBUSB_ENDPOINT_OUT;
DLOG("Successfully opened stlinkv1 by libusb :)\n");
sl->verbose = verbose;
sl->backend_data = slsg;
sl->backend = &_stlink_sg_backend;
sl->core_stat = STLINK_CORE_STAT_UNKNOWN;
slsg->q_addr = 0;
/* flash memory settings */
sl->flash_base = STM32_FLASH_BASE;
sl->flash_size = STM32_FLASH_SIZE;
sl->flash_pgsz = STM32_FLASH_PGSZ;
/* system memory */
sl->sys_base = STM32_SYSTEM_BASE;
sl->sys_size = STM32_SYSTEM_SIZE;
/* sram memory settings */
sl->sram_base = STM32_SRAM_BASE;
sl->sram_size = STM32_SRAM_SIZE;
return sl;
}
stlink_t* stlink_v1_open(const int verbose) {
ugly_init(verbose);
stlink_t *sl = stlink_open(verbose);
if (sl == NULL) {
fputs("Error: could not open stlink device\n", stderr);
return NULL;
}
stlink_version(sl);
if ((sl->version.st_vid != USB_ST_VID) || (sl->version.stlink_pid != USB_STLINK_PID)) {
ugly_log(UERROR, LOG_TAG,
"WTF? successfully opened, but unable to read version details. BROKEN!\n");
return NULL;
}
DLOG("Reading current mode...\n");
switch (stlink_current_mode(sl)) {
case STLINK_DEV_MASS_MODE:
return sl;
case STLINK_DEV_DEBUG_MODE:
// TODO go to mass?
return sl;
}
DLOG("Attempting to exit DFU mode\n");
_stlink_sg_exit_dfu_mode(sl);
// exit the dfu mode -> the device is gone
DLOG("\n*** reopen the stlink device ***\n");
delay(1000);
stlink_close(sl);
delay(5000);
DLOG("Attempting to reopen the stlink...\n");
sl = stlink_open(verbose);
if (sl == NULL) {
fputs("Error: could not open stlink device\n", stderr);
return NULL;
}
// re-query device info
stlink_version(sl);
return sl;
}