static void verdex_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
PXA2xxState *cpu;
int index;
uint32_t verdex_rom = 0x02000000;
uint32_t verdex_ram = 0x10000000;
cpu = pxa270_init(verdex_ram, cpu_model ?: "pxa270-c0");
index = drive_get_index(IF_PFLASH, 0, 0);
if (index == -1) {
fprintf(stderr, "A flash image must be given with the "
"'pflash' parameter\n");
exit(1);
}
if (!pflash_cfi01_register(0x00000000, qemu_ram_alloc(verdex_rom),
drives_table[index].bdrv, sector_len, verdex_rom / sector_len,
2, 0, 0, 0, 0)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
cpu->env->regs[15] = 0x00000000;
/* Interrupt line of NIC is connected to GPIO line 99 */
smc91c111_init(&nd_table[0], 0x04000300,
pxa2xx_gpio_in_get(cpu->gpio)[99]);
}
static void connex_init(QEMUMachineInitArgs *args)
{
PXA2xxState *cpu;
DriveInfo *dinfo;
int be;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t connex_rom = 0x01000000;
uint32_t connex_ram = 0x04000000;
cpu = pxa255_init(address_space_mem, connex_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo) {
fprintf(stderr, "A flash image must be given with the "
"'pflash' parameter\n");
exit(1);
}
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
if (!pflash_cfi01_register(0x00000000, NULL, "connext.rom", connex_rom,
dinfo->bdrv, sector_len, connex_rom / sector_len,
2, 0, 0, 0, 0, be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
/* Interrupt line of NIC is connected to GPIO line 36 */
smc91c111_init(&nd_table[0], 0x04000300,
qdev_get_gpio_in(cpu->gpio, 36));
}
static void mainstone_common_init(ram_addr_t ram_size,
const char *kernel_filename,
const char *kernel_cmdline, const char *initrd_filename,
const char *cpu_model, enum mainstone_model_e model, int arm_id)
{
uint32_t sector_len = 256 * 1024;
target_phys_addr_t mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
PXA2xxState *cpu;
qemu_irq *mst_irq;
DriveInfo *dinfo;
int i;
if (!cpu_model)
cpu_model = "pxa270-c5";
/* Setup CPU & memory */
cpu = pxa270_init(mainstone_binfo.ram_size, cpu_model);
cpu_register_physical_memory(0, MAINSTONE_ROM,
qemu_ram_alloc(NULL, "mainstone.rom",
MAINSTONE_ROM) | IO_MEM_ROM);
/* Setup initial (reset) machine state */
cpu->env->regs[15] = mainstone_binfo.loader_start;
/* There are two 32MiB flash devices on the board */
for (i = 0; i < 2; i ++) {
dinfo = drive_get(IF_PFLASH, 0, i);
if (!dinfo) {
fprintf(stderr, "Two flash images must be given with the "
"'pflash' parameter\n");
exit(1);
}
if (!pflash_cfi01_register(mainstone_flash_base[i],
qemu_ram_alloc(NULL, "mainstone.flash",
MAINSTONE_FLASH),
dinfo->bdrv, sector_len,
MAINSTONE_FLASH / sector_len, 4, 0, 0, 0, 0)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
}
mst_irq = mst_irq_init(cpu, MST_FPGA_PHYS, PXA2XX_PIC_GPIO_0);
/* setup keypad */
printf("map addr %p\n", &map);
pxa27x_register_keypad(cpu->kp, map, 0xe0);
/* MMC/SD host */
pxa2xx_mmci_handlers(cpu->mmc, NULL, mst_irq[MMC_IRQ]);
smc91c111_init(&nd_table[0], MST_ETH_PHYS, mst_irq[ETHERNET_IRQ]);
mainstone_binfo.kernel_filename = kernel_filename;
mainstone_binfo.kernel_cmdline = kernel_cmdline;
mainstone_binfo.initrd_filename = initrd_filename;
mainstone_binfo.board_id = arm_id;
arm_load_kernel(cpu->env, &mainstone_binfo);
}
static void verdex_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
PXA2xxState *cpu;
DriveInfo *dinfo;
int be;
uint32_t verdex_rom = 0x02000000;
uint32_t verdex_ram = 0x10000000;
cpu = pxa270_init(verdex_ram, cpu_model ?: "pxa270-c0");
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo) {
fprintf(stderr, "A flash image must be given with the "
"'pflash' parameter\n");
exit(1);
}
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
if (!pflash_cfi01_register(0x00000000, qemu_ram_alloc(NULL, "verdex.rom",
verdex_rom),
dinfo->bdrv, sector_len, verdex_rom / sector_len,
2, 0, 0, 0, 0, be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
/* Interrupt line of NIC is connected to GPIO line 99 */
smc91c111_init(&nd_table[0], 0x04000300,
qdev_get_gpio_in(cpu->gpio, 99));
}
static void verdex_init(MachineState *machine)
{
const char *cpu_model = machine->cpu_model;
PXA2xxState *cpu;
DriveInfo *dinfo;
int be;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t verdex_rom = 0x02000000;
uint32_t verdex_ram = 0x10000000;
cpu = pxa270_init(address_space_mem, verdex_ram, cpu_model ?: "pxa270-c0");
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo && !qtest_enabled()) {
fprintf(stderr, "A flash image must be given with the "
"'pflash' parameter\n");
exit(1);
}
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
if (!pflash_cfi01_register(0x00000000, NULL, "verdex.rom", verdex_rom,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
sector_len, verdex_rom / sector_len,
2, 0, 0, 0, 0, be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
/* Interrupt line of NIC is connected to GPIO line 99 */
smc91c111_init(&nd_table[0], 0x04000300,
qdev_get_gpio_in(cpu->gpio, 99));
}
static void connex_init(MachineState *machine)
{
PXA2xxState *cpu;
DriveInfo *dinfo;
int be;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t connex_rom = 0x01000000;
uint32_t connex_ram = 0x04000000;
cpu = pxa255_init(address_space_mem, connex_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo && !qtest_enabled()) {
error_report("A flash image must be given with the "
"'pflash' parameter");
exit(1);
}
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
if (!pflash_cfi01_register(0x00000000, NULL, "connext.rom", connex_rom,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
sector_len, connex_rom / sector_len,
2, 0, 0, 0, 0, be)) {
error_report("Error registering flash memory");
exit(1);
}
/* Interrupt line of NIC is connected to GPIO line 36 */
smc91c111_init(&nd_table[0], 0x04000300,
qdev_get_gpio_in(cpu->gpio, 36));
}
static void realview_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model,
enum realview_board_type board_type)
{
ARMCPU *cpu = NULL;
CPUARMState *env;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram_lo = g_new(MemoryRegion, 1);
MemoryRegion *ram_hi = g_new(MemoryRegion, 1);
MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
MemoryRegion *ram_hack = g_new(MemoryRegion, 1);
DeviceState *dev, *sysctl, *gpio2, *pl041;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
qemu_irq mmc_irq[2];
PCIBus *pci_bus;
NICInfo *nd;
i2c_bus *i2c;
int n;
int done_nic = 0;
qemu_irq cpu_irq[4];
int is_mpcore = 0;
int is_pb = 0;
uint32_t proc_id = 0;
uint32_t sys_id;
ram_addr_t low_ram_size;
switch (board_type) {
case BOARD_EB:
break;
case BOARD_EB_MPCORE:
is_mpcore = 1;
break;
case BOARD_PB_A8:
is_pb = 1;
break;
case BOARD_PBX_A9:
is_mpcore = 1;
is_pb = 1;
break;
}
for (n = 0; n < smp_cpus; n++) {
cpu = cpu_arm_init(cpu_model);
if (!cpu) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(cpu);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
env = &cpu->env;
if (arm_feature(env, ARM_FEATURE_V7)) {
if (is_mpcore) {
proc_id = 0x0c000000;
} else {
proc_id = 0x0e000000;
}
} else if (arm_feature(env, ARM_FEATURE_V6K)) {
proc_id = 0x06000000;
} else if (arm_feature(env, ARM_FEATURE_V6)) {
proc_id = 0x04000000;
} else {
proc_id = 0x02000000;
}
if (is_pb && ram_size > 0x20000000) {
/* Core tile RAM. */
low_ram_size = ram_size - 0x20000000;
ram_size = 0x20000000;
memory_region_init_ram(ram_lo, "realview.lowmem", low_ram_size);
vmstate_register_ram_global(ram_lo);
memory_region_add_subregion(sysmem, 0x20000000, ram_lo);
}
memory_region_init_ram(ram_hi, "realview.highmem", ram_size);
vmstate_register_ram_global(ram_hi);
low_ram_size = ram_size;
if (low_ram_size > 0x10000000)
low_ram_size = 0x10000000;
/* SDRAM at address zero. */
memory_region_init_alias(ram_alias, "realview.alias",
ram_hi, 0, low_ram_size);
memory_region_add_subregion(sysmem, 0, ram_alias);
if (is_pb) {
/* And again at a high address. */
memory_region_add_subregion(sysmem, 0x70000000, ram_hi);
} else {
ram_size = low_ram_size;
}
sys_id = is_pb ? 0x01780500 : 0xc1400400;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
qdev_init_nofail(sysctl);
sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
if (is_mpcore) {
target_phys_addr_t periphbase;
dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
if (is_pb) {
periphbase = 0x1f000000;
} else {
periphbase = 0x10100000;
}
sysbus_mmio_map(busdev, 0, periphbase);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
/* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
} else {
uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
/* For now just create the nIRQ GIC, and ignore the others. */
dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(sysbus_from_qdev(pl041), 0, 0x10004000);
sysbus_connect_irq(sysbus_from_qdev(pl041), 0, pic[19]);
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
sysbus_create_simple("pl011", 0x10009000, pic[12]);
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
/* DMA controller is optional, apparently. */
sysbus_create_simple("pl081", 0x10030000, pic[24]);
sysbus_create_simple("sp804", 0x10011000, pic[4]);
sysbus_create_simple("sp804", 0x10012000, pic[5]);
sysbus_create_simple("pl061", 0x10013000, pic[6]);
sysbus_create_simple("pl061", 0x10014000, pic[7]);
gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
sysbus_create_simple("pl111", 0x10020000, pic[23]);
dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
/* Wire up MMC card detect and read-only signals. These have
* to go to both the PL061 GPIO and the sysctl register.
* Note that the PL181 orders these lines (readonly,inserted)
* and the PL061 has them the other way about. Also the card
* detect line is inverted.
*/
mmc_irq[0] = qemu_irq_split(
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
qdev_get_gpio_in(gpio2, 1));
mmc_irq[1] = qemu_irq_split(
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
sysbus_create_simple("pl031", 0x10017000, pic[10]);
if (!is_pb) {
dev = qdev_create(NULL, "realview_pci");
busdev = sysbus_from_qdev(dev);
qdev_init_nofail(dev);
sysbus_mmio_map(busdev, 0, 0x61000000); /* PCI self-config */
sysbus_mmio_map(busdev, 1, 0x62000000); /* PCI config */
sysbus_mmio_map(busdev, 2, 0x63000000); /* PCI I/O */
sysbus_connect_irq(busdev, 0, pic[48]);
sysbus_connect_irq(busdev, 1, pic[49]);
sysbus_connect_irq(busdev, 2, pic[50]);
sysbus_connect_irq(busdev, 3, pic[51]);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
pci_create_simple(pci_bus, -1, "pci-ohci");
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (!done_nic && (!nd->model ||
strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
if (is_pb) {
lan9118_init(nd, 0x4e000000, pic[28]);
} else {
smc91c111_init(nd, 0x4e000000, pic[28]);
}
done_nic = 1;
} else {
pci_nic_init_nofail(nd, "rtl8139", NULL);
}
}
dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);
i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
i2c_create_slave(i2c, "ds1338", 0x68);
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
/* 0x10001000 System controller. */
/* 0x10002000 Two-Wire Serial Bus. */
/* 0x10003000 Reserved. */
/* 0x10004000 AACI. */
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
/* 0x10008000 Character LCD. (EB) */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
/* 0x1000c000 UART3. */
/* 0x1000d000 SSPI. */
/* 0x1000e000 SCI. */
/* 0x1000f000 Reserved. */
/* 0x10010000 Watchdog. */
/* 0x10011000 Timer 0+1. */
/* 0x10012000 Timer 2+3. */
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
/* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
/* 0x10040000 GIC1. (EB) */
/* 0x10050000 GIC2. (EB) */
/* 0x10060000 GIC3. (EB) */
/* 0x10070000 GIC4. (EB) */
/* 0x10080000 SMC. */
/* 0x1e000000 GIC1. (PB) */
/* 0x1e001000 GIC2. (PB) */
/* 0x1e002000 GIC3. (PB) */
/* 0x1e003000 GIC4. (PB) */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
/* 0x4c000000 Configuration flash. */
/* 0x4e000000 Ethernet. */
/* 0x4f000000 USB. */
/* 0x50000000 PISMO. */
/* 0x54000000 PISMO. */
/* 0x58000000 PISMO. */
/* 0x5c000000 PISMO. */
/* 0x60000000 PCI. */
/* 0x61000000 PCI Self Config. */
/* 0x62000000 PCI Config. */
/* 0x63000000 PCI IO. */
/* 0x64000000 PCI mem 0. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
memory_region_init_ram(ram_hack, "realview.hack", 0x1000);
vmstate_register_ram_global(ram_hack);
memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack);
realview_binfo.ram_size = ram_size;
realview_binfo.kernel_filename = kernel_filename;
realview_binfo.kernel_cmdline = kernel_cmdline;
realview_binfo.initrd_filename = initrd_filename;
realview_binfo.nb_cpus = smp_cpus;
realview_binfo.board_id = realview_board_id[board_type];
realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
arm_load_kernel(arm_env_get_cpu(first_cpu), &realview_binfo);
}
static void mainstone_common_init(MemoryRegion *address_space_mem,
ram_addr_t ram_size,
const char *kernel_filename,
const char *kernel_cmdline, const char *initrd_filename,
const char *cpu_model, enum mainstone_model_e model, int arm_id)
{
uint32_t sector_len = 256 * 1024;
hwaddr mainstone_flash_base[] = { MST_FLASH_0, MST_FLASH_1 };
PXA2xxState *mpu;
DeviceState *mst_irq;
DriveInfo *dinfo;
int i;
int be;
MemoryRegion *rom = g_new(MemoryRegion, 1);
if (!cpu_model)
cpu_model = "pxa270-c5";
/* Setup CPU & memory */
mpu = pxa270_init(address_space_mem, mainstone_binfo.ram_size, cpu_model);
memory_region_init_ram(rom, "mainstone.rom", MAINSTONE_ROM);
vmstate_register_ram_global(rom);
memory_region_set_readonly(rom, true);
memory_region_add_subregion(address_space_mem, 0, rom);
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
/* There are two 32MiB flash devices on the board */
for (i = 0; i < 2; i ++) {
dinfo = drive_get(IF_PFLASH, 0, i);
if (!dinfo) {
fprintf(stderr, "Two flash images must be given with the "
"'pflash' parameter\n");
exit(1);
}
if (!pflash_cfi01_register(mainstone_flash_base[i], NULL,
i ? "mainstone.flash1" : "mainstone.flash0",
MAINSTONE_FLASH,
dinfo->bdrv, sector_len,
MAINSTONE_FLASH / sector_len, 4, 0, 0, 0, 0,
be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
}
mst_irq = sysbus_create_simple("mainstone-fpga", MST_FPGA_PHYS,
qdev_get_gpio_in(mpu->gpio, 0));
/* setup keypad */
printf("map addr %p\n", &map);
pxa27x_register_keypad(mpu->kp, map, 0xe0);
/* MMC/SD host */
pxa2xx_mmci_handlers(mpu->mmc, NULL, qdev_get_gpio_in(mst_irq, MMC_IRQ));
pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[0],
qdev_get_gpio_in(mst_irq, S0_IRQ),
qdev_get_gpio_in(mst_irq, S0_CD_IRQ));
pxa2xx_pcmcia_set_irq_cb(mpu->pcmcia[1],
qdev_get_gpio_in(mst_irq, S1_IRQ),
qdev_get_gpio_in(mst_irq, S1_CD_IRQ));
smc91c111_init(&nd_table[0], MST_ETH_PHYS,
qdev_get_gpio_in(mst_irq, ETHERNET_IRQ));
mainstone_binfo.kernel_filename = kernel_filename;
mainstone_binfo.kernel_cmdline = kernel_cmdline;
mainstone_binfo.initrd_filename = initrd_filename;
mainstone_binfo.board_id = arm_id;
arm_load_kernel(mpu->cpu, &mainstone_binfo);
}
static void realview_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUState *env;
ram_addr_t ram_offset;
DeviceState *dev;
qemu_irq *irqp;
qemu_irq pic[64];
PCIBus *pci_bus;
NICInfo *nd;
int n;
int done_smc = 0;
qemu_irq cpu_irq[4];
int ncpu;
if (!cpu_model)
cpu_model = "arm926";
/* FIXME: obey smp_cpus. */
if (strcmp(cpu_model, "arm11mpcore") == 0) {
ncpu = 4;
} else {
ncpu = 1;
}
for (n = 0; n < ncpu; n++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(env);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
if (n > 0) {
/* Set entry point for secondary CPUs. This assumes we're using
the init code from arm_boot.c. Real hardware resets all CPUs
the same. */
env->regs[15] = 0x80000000;
}
}
ram_offset = qemu_ram_alloc(ram_size);
/* ??? RAM should repeat to fill physical memory space. */
/* SDRAM at address zero. */
cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
arm_sysctl_init(0x10000000, 0xc1400400);
if (ncpu == 1) {
/* ??? The documentation says GIC1 is nFIQ and either GIC2 or GIC3
is nIRQ (there are inconsistencies). However Linux 2.6.17 expects
GIC1 to be nIRQ and ignores all the others, so do that for now. */
dev = sysbus_create_simple("realview_gic", 0x10040000, cpu_irq[0]);
} else {
dev = sysbus_create_varargs("realview_mpcore", -1,
cpu_irq[0], cpu_irq[1], cpu_irq[2],
cpu_irq[3], NULL);
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_irq_sink(dev, n);
}
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
sysbus_create_simple("pl011", 0x10009000, pic[12]);
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
/* DMA controller is optional, apparently. */
sysbus_create_simple("pl081", 0x10030000, pic[24]);
sysbus_create_simple("sp804", 0x10011000, pic[4]);
sysbus_create_simple("sp804", 0x10012000, pic[5]);
sysbus_create_simple("pl110_versatile", 0x10020000, pic[23]);
sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
sysbus_create_simple("pl031", 0x10017000, pic[10]);
dev = sysbus_create_varargs("realview_pci", 0x60000000,
pic[48], pic[49], pic[50], pic[51], NULL);
pci_bus = qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, 3, -1);
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if ((!nd->model && !done_smc) || strcmp(nd->model, "smc91c111") == 0) {
smc91c111_init(nd, 0x4e000000, pic[28]);
done_smc = 1;
} else {
pci_nic_init(pci_bus, nd, -1, "rtl8139");
}
}
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
/* 0x10001000 System controller. */
/* 0x10002000 Two-Wire Serial Bus. */
/* 0x10003000 Reserved. */
/* 0x10004000 AACI. */
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
/* 0x10008000 Character LCD. */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
/* 0x1000c000 UART3. */
/* 0x1000d000 SSPI. */
/* 0x1000e000 SCI. */
/* 0x1000f000 Reserved. */
/* 0x10010000 Watchdog. */
/* 0x10011000 Timer 0+1. */
/* 0x10012000 Timer 2+3. */
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
/* 0x10016000 Reserved. */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
/* 0x10040000 GIC1. */
/* 0x10050000 GIC2. */
/* 0x10060000 GIC3. */
/* 0x10070000 GIC4. */
/* 0x10080000 SMC. */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
/* 0x4c000000 Configuration flash. */
/* 0x4e000000 Ethernet. */
/* 0x4f000000 USB. */
/* 0x50000000 PISMO. */
/* 0x54000000 PISMO. */
/* 0x58000000 PISMO. */
/* 0x5c000000 PISMO. */
/* 0x60000000 PCI. */
/* 0x61000000 PCI Self Config. */
/* 0x62000000 PCI Config. */
/* 0x63000000 PCI IO. */
/* 0x64000000 PCI mem 0. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
ram_offset = qemu_ram_alloc(0x1000);
cpu_register_physical_memory(0x80000000, 0x1000, ram_offset | IO_MEM_RAM);
realview_binfo.ram_size = ram_size;
realview_binfo.kernel_filename = kernel_filename;
realview_binfo.kernel_cmdline = kernel_cmdline;
realview_binfo.initrd_filename = initrd_filename;
realview_binfo.nb_cpus = ncpu;
arm_load_kernel(first_cpu, &realview_binfo);
}
static void integratorcp_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUState *env;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
qemu_irq pic[32];
qemu_irq *cpu_pic;
DeviceState *dev;
int i;
if (!cpu_model)
cpu_model = "arm926";
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
memory_region_init_ram(ram, "integrator.ram", ram_size);
vmstate_register_ram_global(ram);
/* ??? On a real system the first 1Mb is mapped as SSRAM or boot flash. */
/* ??? RAM should repeat to fill physical memory space. */
/* SDRAM at address zero*/
memory_region_add_subregion(address_space_mem, 0, ram);
/* And again at address 0x80000000 */
memory_region_init_alias(ram_alias, "ram.alias", ram, 0, ram_size);
memory_region_add_subregion(address_space_mem, 0x80000000, ram_alias);
dev = qdev_create(NULL, "integrator_core");
qdev_prop_set_uint32(dev, "memsz", ram_size >> 20);
qdev_init_nofail(dev);
sysbus_mmio_map((SysBusDevice *)dev, 0, 0x10000000);
cpu_pic = arm_pic_init_cpu(env);
dev = sysbus_create_varargs("integrator_pic", 0x14000000,
cpu_pic[ARM_PIC_CPU_IRQ],
cpu_pic[ARM_PIC_CPU_FIQ], NULL);
for (i = 0; i < 32; i++) {
pic[i] = qdev_get_gpio_in(dev, i);
}
sysbus_create_simple("integrator_pic", 0xca000000, pic[26]);
sysbus_create_varargs("integrator_pit", 0x13000000,
pic[5], pic[6], pic[7], NULL);
sysbus_create_simple("pl031", 0x15000000, pic[8]);
sysbus_create_simple("pl011", 0x16000000, pic[1]);
sysbus_create_simple("pl011", 0x17000000, pic[2]);
icp_control_init(0xcb000000);
sysbus_create_simple("pl050_keyboard", 0x18000000, pic[3]);
sysbus_create_simple("pl050_mouse", 0x19000000, pic[4]);
sysbus_create_varargs("pl181", 0x1c000000, pic[23], pic[24], NULL);
if (nd_table[0].vlan)
smc91c111_init(&nd_table[0], 0xc8000000, pic[27]);
sysbus_create_simple("pl110", 0xc0000000, pic[22]);
integrator_binfo.ram_size = ram_size;
integrator_binfo.kernel_filename = kernel_filename;
integrator_binfo.kernel_cmdline = kernel_cmdline;
integrator_binfo.initrd_filename = initrd_filename;
arm_load_kernel(env, &integrator_binfo);
}
static void android_arm_init_(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env;
qemu_irq *cpu_pic;
qemu_irq *goldfish_pic;
int i;
struct arm_boot_info info;
ram_addr_t ram_offset;
DisplayState* ds = get_displaystate();
if (!cpu_model)
cpu_model = "arm926";
env = cpu_init(cpu_model);
register_savevm( "cpu", 0, ARM_CPU_SAVE_VERSION, cpu_save, cpu_load, env );
ram_offset = qemu_ram_alloc(ram_size);
cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
cpu_pic = arm_pic_init_cpu(env);
goldfish_pic = goldfish_interrupt_init(0xff000000, cpu_pic[ARM_PIC_CPU_IRQ], cpu_pic[ARM_PIC_CPU_FIQ]);
goldfish_device_init(goldfish_pic, 0xff010000, 0x7f0000, 10, 22);
goldfish_device_bus_init(0xff001000, 1);
goldfish_timer_and_rtc_init(0xff003000, 3);
goldfish_tty_add(serial_hds[0], 0, 0xff002000, 4);
for(i = 1; i < MAX_SERIAL_PORTS; i++) {
//printf("android_arm_init serial %d %x\n", i, serial_hds[i]);
if(serial_hds[i]) {
goldfish_tty_add(serial_hds[i], i, 0, 0);
}
}
for(i = 0; i < MAX_NICS; i++) {
if (nd_table[i].vlan) {
if (nd_table[i].model == NULL
|| strcmp(nd_table[i].model, "smc91c111") == 0) {
struct goldfish_device *smc_device;
smc_device = qemu_mallocz(sizeof(*smc_device));
smc_device->name = "smc91x";
smc_device->id = i;
smc_device->size = 0x1000;
smc_device->irq_count = 1;
goldfish_add_device_no_io(smc_device);
smc91c111_init(&nd_table[i], smc_device->base, goldfish_pic[smc_device->irq]);
} else {
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
exit (1);
}
}
}
goldfish_fb_init(ds, 0);
#ifdef HAS_AUDIO
goldfish_audio_init(0xff004000, 0, audio_input_source);
#endif
{
int idx = drive_get_index( IF_IDE, 0, 0 );
if (idx >= 0)
goldfish_mmc_init(0xff005000, 0, drives_table[idx].bdrv);
}
goldfish_memlog_init(0xff006000);
if (android_hw->hw_battery)
goldfish_battery_init();
goldfish_sensor_init();
goldfish_add_device_no_io(&event0_device);
events_dev_init(event0_device.base, goldfish_pic[event0_device.irq]);
#ifdef CONFIG_NAND
goldfish_add_device_no_io(&nand_device);
nand_dev_init(nand_device.base);
#endif
#ifdef CONFIG_TRACE
extern const char *trace_filename;
/* Init trace device if either tracing, or memory checking is enabled. */
if (trace_filename != NULL
#ifdef CONFIG_MEMCHECK
|| memcheck_enabled
#endif // CONFIG_MEMCHECK
) {
trace_dev_init();
}
if (trace_filename != NULL) {
D( "Trace file name is set to %s\n", trace_filename );
} else {
D("Trace file name is not set\n");
}
#endif
#if TEST_SWITCH
{
void *sw;
sw = goldfish_switch_add("test", NULL, NULL, 0);
goldfish_switch_set_state(sw, 1);
goldfish_switch_add("test2", switch_test_write, sw, 1);
}
#endif
memset(&info, 0, sizeof info);
info.ram_size = ram_size;
info.kernel_filename = kernel_filename;
info.kernel_cmdline = kernel_cmdline;
info.initrd_filename = initrd_filename;
info.nb_cpus = 1;
info.board_id = 1441;
arm_load_kernel(env, &info);
}
static void android_arm_init_(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env;
qemu_irq *cpu_pic;
ram_addr_t ram_offset;
DeviceState *gf_int;
int i;
if (!cpu_model)
cpu_model = "arm926";
env = cpu_init(cpu_model);
ram_offset = qemu_ram_alloc(NULL,"android_arm",ram_size);
cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
cpu_pic = arm_pic_init_cpu(env);
GoldfishBus *gbus = goldfish_bus_init(0xff001000, 1);
gf_int = goldfish_int_create(gbus, 0xff000000, cpu_pic[ARM_PIC_CPU_IRQ], cpu_pic[ARM_PIC_CPU_FIQ]);
goldfish_device_init(gf_int, 0xff010000, 10);
goldfish_timer_create(gbus, 0xff003000, 3);
goldfish_rtc_create(gbus);
goldfish_tty_create(gbus, serial_hds[0], 0, 0xff002000, 4);
for(i = 1; i < MAX_SERIAL_PORTS; i++) {
printf("android_arm_init serial %d %x\n", i, serial_hds[i]);
if(serial_hds[i]) {
printf("serial_hds: %d\n",i);
goldfish_tty_create(gbus, serial_hds[i], i, 0, 0);
}
}
for(i = 0; i < MAX_NICS; i++) {
if (nd_table[i].vlan) {
if (nd_table[i].model == NULL
|| strcmp(nd_table[i].model, "smc91c111") == 0) {
GoldfishDevice *smc_device;
smc_device = g_malloc0(sizeof(*smc_device));
smc_device->name = (char *)"smc91x";
smc_device->id = i;
smc_device->size = 0x1000;
smc_device->irq_count = 1;
goldfish_add_device_no_io(smc_device);
smc91c111_init(&nd_table[i], smc_device->base, qdev_get_gpio_in(gf_int, smc_device->irq));
} else {
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
exit (1);
}
}
}
goldfish_fb_create(gbus, 0);
#ifdef HAS_AUDIO
//goldfish_audio_init(0xff004000, 0, audio_input_source);
#endif
goldfish_mmc_create(gbus, 0xff005000, 0);
goldfish_memlog_create(gbus, 0xff006000);
goldfish_battery_create(gbus);
goldfish_events_create(gbus, gf_int);
goldfish_nand_create(gbus);
goldfish_pipe_create(gbus);
#if TEST_SWITCH
{
void *sw;
sw = goldfish_switch_create(gbus, "test", NULL, NULL, 0);
goldfish_switch_set_state(sw, 1);
goldfish_switch_create(gbus, "test2", switch_test_write, sw, 1);
}
#endif
info.ram_size = ram_size;
info.kernel_filename = kernel_filename;
info.kernel_cmdline = kernel_cmdline;
info.initrd_filename = initrd_filename;
info.nb_cpus = 1;
arm_load_kernel(env, &info);
android_emulation_setup();
}
static void android_mips_init_(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env;
qemu_irq *goldfish_pic;
int i;
ram_addr_t ram_offset;
if (!cpu_model)
cpu_model = "24Kf";
env = cpu_init(cpu_model);
register_savevm( "cpu", 0, MIPS_CPU_SAVE_VERSION, cpu_save, cpu_load, env );
if (ram_size > GOLDFISH_IO_SPACE)
ram_size = GOLDFISH_IO_SPACE; /* avoid overlap of ram and IO regs */
ram_offset = qemu_ram_alloc(NULL, "android_mips", ram_size);
cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
/* Init internal devices */
cpu_mips_irq_init_cpu(env);
cpu_mips_clock_init(env);
goldfish_pic = goldfish_interrupt_init(GOLDFISH_INTERRUPT,
env->irq[2], env->irq[3]);
goldfish_device_init(goldfish_pic, GOLDFISH_DEVICES, 0x7f0000, 10, 22);
goldfish_device_bus_init(GOLDFISH_DEVICEBUS, 1);
goldfish_timer_and_rtc_init(GOLDFISH_RTC, 3);
goldfish_tty_add(serial_hds[0], 0, GOLDFISH_TTY, 4);
for(i = 1; i < MAX_SERIAL_PORTS; i++) {
if(serial_hds[i]) {
goldfish_tty_add(serial_hds[i], i, 0, 0);
}
}
for(i = 0; i < MAX_NICS; i++) {
if (nd_table[i].vlan) {
if (nd_table[i].model == NULL
|| strcmp(nd_table[i].model, "smc91c111") == 0) {
struct goldfish_device *smc_device;
smc_device = qemu_mallocz(sizeof(*smc_device));
smc_device->name = "smc91x";
smc_device->id = i;
smc_device->size = 0x1000;
smc_device->irq_count = 1;
goldfish_add_device_no_io(smc_device);
smc91c111_init(&nd_table[i], smc_device->base, goldfish_pic[smc_device->irq]);
} else {
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
exit (1);
}
}
}
goldfish_fb_init(0);
#ifdef HAS_AUDIO
goldfish_audio_init(GOLDFISH_AUDIO, 0, audio_input_source);
#endif
{
DriveInfo* info = drive_get( IF_IDE, 0, 0 );
if (info != NULL) {
goldfish_mmc_init(GOLDFISH_MMC, 0, info->bdrv);
}
}
goldfish_memlog_init(GOLDFISH_MEMLOG);
if (android_hw->hw_battery)
goldfish_battery_init();
goldfish_add_device_no_io(&event0_device);
events_dev_init(event0_device.base, goldfish_pic[event0_device.irq]);
#ifdef CONFIG_NAND
goldfish_add_device_no_io(&nand_device);
nand_dev_init(nand_device.base);
#endif
#ifdef CONFIG_TRACE
extern const char *trace_filename;
/* Init trace device if either tracing, or memory checking is enabled. */
if (trace_filename != NULL
#ifdef CONFIG_MEMCHECK
|| memcheck_enabled
#endif // CONFIG_MEMCHECK
|| 1 /* XXX: ALWAYS AVAILABLE FOR QEMUD PIPES */
) {
trace_dev_init();
}
if (trace_filename != NULL) {
D( "Trace file name is set to %s\n", trace_filename );
} else {
D("Trace file name is not set\n");
}
#endif
pipe_dev_init();
#if TEST_SWITCH
{
void *sw;
sw = goldfish_switch_add("test", NULL, NULL, 0);
goldfish_switch_set_state(sw, 1);
goldfish_switch_add("test2", switch_test_write, sw, 1);
}
#endif
android_load_kernel(env, ram_size, kernel_filename, kernel_cmdline, initrd_filename);
}
static void android_arm_init_(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUARMState *env;
qemu_irq *cpu_pic;
qemu_irq *goldfish_pic;
int i;
struct arm_boot_info info;
ram_addr_t ram_offset;
if (!cpu_model)
cpu_model = "arm926";
env = cpu_init(cpu_model);
ram_offset = qemu_ram_alloc(NULL,"android_arm",ram_size);
cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
cpu_pic = arm_pic_init_cpu(env);
goldfish_pic = goldfish_interrupt_init(0xff000000, cpu_pic[ARM_PIC_CPU_IRQ], cpu_pic[ARM_PIC_CPU_FIQ]);
goldfish_device_init(goldfish_pic, 0xff010000, 0x7f0000, 10, 22);
goldfish_device_bus_init(0xff001000, 1);
goldfish_timer_and_rtc_init(0xff003000, 3);
goldfish_tty_add(serial_hds[0], 0, 0xff002000, 4);
for(i = 1; i < MAX_SERIAL_PORTS; i++) {
//printf("android_arm_init serial %d %x\n", i, serial_hds[i]);
if(serial_hds[i]) {
goldfish_tty_add(serial_hds[i], i, 0, 0);
}
}
for(i = 0; i < MAX_NICS; i++) {
if (nd_table[i].vlan) {
if (nd_table[i].model == NULL
|| strcmp(nd_table[i].model, "smc91c111") == 0) {
struct goldfish_device *smc_device;
smc_device = g_malloc0(sizeof(*smc_device));
smc_device->name = "smc91x";
smc_device->id = i;
smc_device->size = 0x1000;
smc_device->irq_count = 1;
goldfish_add_device_no_io(smc_device);
smc91c111_init(&nd_table[i], smc_device->base, goldfish_pic[smc_device->irq]);
} else {
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
exit (1);
}
}
}
goldfish_fb_init(0);
#ifdef HAS_AUDIO
goldfish_audio_init(0xff004000, 0, audio_input_source);
#endif
{
DriveInfo* info = drive_get( IF_IDE, 0, 0 );
if (info != NULL) {
goldfish_mmc_init(0xff005000, 0, info->bdrv);
}
}
goldfish_battery_init(android_hw->hw_battery);
goldfish_add_device_no_io(&event0_device);
events_dev_init(event0_device.base, goldfish_pic[event0_device.irq]);
#ifdef CONFIG_NAND
goldfish_add_device_no_io(&nand_device);
nand_dev_init(nand_device.base);
#endif
bool newDeviceNaming =
(androidHwConfig_getKernelDeviceNaming(android_hw) >= 1);
pipe_dev_init(newDeviceNaming);
memset(&info, 0, sizeof info);
info.ram_size = ram_size;
info.kernel_filename = kernel_filename;
info.kernel_cmdline = kernel_cmdline;
info.initrd_filename = initrd_filename;
info.nb_cpus = 1;
info.is_linux = 1;
info.board_id = 1441;
arm_load_kernel(env, &info);
}
static void realview_init(int ram_size, int vga_ram_size, int boot_device,
DisplayState *ds, const char **fd_filename, int snapshot,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename)
{
CPUState *env;
void *pic;
void *scsi_hba;
PCIBus *pci_bus;
NICInfo *nd;
int n;
int done_smc = 0;
env = cpu_init();
cpu_arm_set_model(env, ARM_CPUID_ARM926);
//cpu_arm_set_model(env, ARM_CPUID_ARM11MPCORE);
/* ??? RAM shoud repeat to fill physical memory space. */
/* SDRAM at address zero. */
cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
arm_sysctl_init(0x10000000, 0xc1400400);
pic = arm_pic_init_cpu(env);
/* ??? The documentation says GIC1 is nFIQ and either GIC2 or GIC3
is nIRQ (there are inconsistencies). However Linux 2.6.17 expects
GIC1 to be nIRQ and ignores all the others, so do that for now. */
pic = arm_gic_init(0x10040000, pic, ARM_PIC_CPU_IRQ);
pl050_init(0x10006000, pic, 20, 0);
pl050_init(0x10007000, pic, 21, 1);
pl011_init(0x10009000, pic, 12, serial_hds[0]);
pl011_init(0x1000a000, pic, 13, serial_hds[1]);
pl011_init(0x1000b000, pic, 14, serial_hds[2]);
pl011_init(0x1000c000, pic, 15, serial_hds[3]);
/* DMA controller is optional, apparently. */
pl080_init(0x10030000, pic, 24, 2);
sp804_init(0x10011000, pic, 4);
sp804_init(0x10012000, pic, 5);
pl110_init(ds, 0x10020000, pic, 23, 1);
pci_bus = pci_vpb_init(pic, 48, 1);
if (usb_enabled) {
usb_ohci_init(pci_bus, 3, -1);
}
scsi_hba = lsi_scsi_init(pci_bus, -1);
for (n = 0; n < MAX_DISKS; n++) {
if (bs_table[n]) {
lsi_scsi_attach(scsi_hba, bs_table[n], n);
}
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (!nd->model)
nd->model = done_smc ? "rtl8139" : "smc91c111";
if (strcmp(nd->model, "smc91c111") == 0) {
smc91c111_init(nd, 0x4e000000, pic, 28);
} else {
pci_nic_init(pci_bus, nd, -1);
}
}
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
/* 0x10001000 System controller. */
/* 0x10002000 Two-Wire Serial Bus. */
/* 0x10003000 Reserved. */
/* 0x10004000 AACI. */
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
/* 0x10008000 Character LCD. */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
/* 0x1000c000 UART3. */
/* 0x1000d000 SSPI. */
/* 0x1000e000 SCI. */
/* 0x1000f000 Reserved. */
/* 0x10010000 Watchdog. */
/* 0x10011000 Timer 0+1. */
/* 0x10012000 Timer 2+3. */
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
/* 0x10016000 Reserved. */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
/* 0x10040000 GIC1 (FIQ1). */
/* 0x10050000 GIC2 (IRQ1). */
/* 0x10060000 GIC3 (FIQ2). */
/* 0x10070000 GIC4 (IRQ2). */
/* 0x10080000 SMC. */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
/* 0x4c000000 Configuration flash. */
/* 0x4e000000 Ethernet. */
/* 0x4f000000 USB. */
/* 0x50000000 PISMO. */
/* 0x54000000 PISMO. */
/* 0x58000000 PISMO. */
/* 0x5c000000 PISMO. */
/* 0x60000000 PCI. */
/* 0x61000000 PCI Self Config. */
/* 0x62000000 PCI Config. */
/* 0x63000000 PCI IO. */
/* 0x64000000 PCI mem 0. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
arm_load_kernel(env, ram_size, kernel_filename, kernel_cmdline,
initrd_filename, 0x33b);
}
static void android_mips_init_(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUOldState *env;
qemu_irq *goldfish_pic;
int i;
ram_addr_t ram_offset;
if (!cpu_model)
cpu_model = "24Kf";
env = cpu_init(cpu_model);
register_savevm(NULL,
"cpu",
0,
MIPS_CPU_SAVE_VERSION,
cpu_save,
cpu_load,
env);
if (ram_size > GOLDFISH_IO_SPACE)
ram_size = GOLDFISH_IO_SPACE; /* avoid overlap of ram and IO regs */
ram_offset = qemu_ram_alloc(NULL, "android_mips", ram_size);
cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
/* Init internal devices */
cpu_mips_irq_init_cpu(env);
cpu_mips_clock_init(env);
goldfish_pic = goldfish_interrupt_init(GOLDFISH_INTERRUPT,
env->irq[2], env->irq[3]);
goldfish_device_init(goldfish_pic, GOLDFISH_DEVICES, 0x7f0000, 10, 22);
goldfish_device_bus_init(GOLDFISH_DEVICEBUS, 1);
goldfish_timer_and_rtc_init(GOLDFISH_RTC, 3);
goldfish_tty_add(serial_hds[0], 0, GOLDFISH_TTY, 4);
for(i = 1; i < MAX_SERIAL_PORTS; i++) {
if(serial_hds[i]) {
goldfish_tty_add(serial_hds[i], i, 0, 0);
}
}
for(i = 0; i < MAX_NICS; i++) {
if (nd_table[i].vlan) {
if (nd_table[i].model == NULL
|| strcmp(nd_table[i].model, "smc91c111") == 0) {
struct goldfish_device *smc_device;
smc_device = g_malloc0(sizeof(*smc_device));
smc_device->name = "smc91x";
smc_device->id = i;
smc_device->size = 0x1000;
smc_device->irq_count = 1;
goldfish_add_device_no_io(smc_device);
smc91c111_init(&nd_table[i], smc_device->base, goldfish_pic[smc_device->irq]);
} else {
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd_table[0].model);
exit (1);
}
}
}
goldfish_fb_init(0);
#ifdef HAS_AUDIO
goldfish_audio_init(GOLDFISH_AUDIO, 0, audio_input_source);
#endif
{
DriveInfo* info = drive_get( IF_IDE, 0, 0 );
if (info != NULL) {
goldfish_mmc_init(GOLDFISH_MMC, 0, info->bdrv);
}
}
goldfish_battery_init(android_hw->hw_battery);
goldfish_add_device_no_io(&event0_device);
events_dev_init(event0_device.base, goldfish_pic[event0_device.irq]);
#ifdef CONFIG_NAND
goldfish_add_device_no_io(&nand_device);
nand_dev_init(nand_device.base);
#endif
#ifdef CONFIG_ANDROID_MEMCHECK
if (memcheck_enabled) {
trace_dev_init();
}
#endif // CONFIG_ANDROID_MEMCHECK
bool newDeviceNaming =
(androidHwConfig_getKernelDeviceNaming(android_hw) >= 1);
pipe_dev_init(newDeviceNaming);
android_load_kernel(env, ram_size, kernel_filename, kernel_cmdline, initrd_filename);
}
static void realview_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model,
enum realview_board_type board_type)
{
CPUState *env = NULL;
ram_addr_t ram_offset;
DeviceState *dev;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
PCIBus *pci_bus;
NICInfo *nd;
i2c_bus *i2c;
DriveInfo *ide,*ide2;
int n;
int done_nic = 0;
qemu_irq cpu_irq[4];
int is_mpcore = 0;
int is_pb = 0;
uint32_t proc_id = 0;
uint32_t sys_id;
ram_addr_t low_ram_size;
switch (board_type) {
case BOARD_EB:
break;
case BOARD_EB_MPCORE:
is_mpcore = 1;
break;
case BOARD_PB_A8:
is_pb = 1;
break;
case BOARD_PBX_A9:
is_mpcore = 1;
is_pb = 1;
break;
}
for (n = 0; n < smp_cpus; n++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(env);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
if (n > 0) {
qemu_register_reset(secondary_cpu_reset, env);
}
}
if (arm_feature(env, ARM_FEATURE_V7)) {
if (is_mpcore) {
proc_id = 0x0c000000;
} else {
proc_id = 0x0e000000;
}
} else if (arm_feature(env, ARM_FEATURE_V6K)) {
proc_id = 0x06000000;
} else if (arm_feature(env, ARM_FEATURE_V6)) {
proc_id = 0x04000000;
} else {
proc_id = 0x02000000;
}
if (is_pb && ram_size > 0x20000000) {
/* Core tile RAM. */
low_ram_size = ram_size - 0x20000000;
ram_size = 0x20000000;
ram_offset = qemu_ram_alloc(NULL, "realview.lowmem", low_ram_size);
cpu_register_physical_memory(0x20000000, low_ram_size,
ram_offset | IO_MEM_RAM);
}
ram_offset = qemu_ram_alloc(NULL, "realview.highmem", ram_size);
low_ram_size = ram_size;
if (low_ram_size > 0x10000000)
low_ram_size = 0x10000000;
/* SDRAM at address zero. */
cpu_register_physical_memory(0, low_ram_size, ram_offset | IO_MEM_RAM);
if (is_pb) {
/* And again at a high address. */
cpu_register_physical_memory(0x70000000, ram_size,
ram_offset | IO_MEM_RAM);
} else {
ram_size = low_ram_size;
}
sys_id = is_pb ? 0x01780500 : 0xc1400400;
arm_sysctl_init(0x10000000, sys_id, proc_id);
if (is_mpcore) {
dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
if (is_pb) {
realview_binfo.smp_priv_base = 0x1f000000;
} else {
realview_binfo.smp_priv_base = 0x10100000;
}
sysbus_mmio_map(busdev, 0, realview_binfo.smp_priv_base);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
} else {
uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
/* For now just create the nIRQ GIC, and ignore the others. */
dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
sysbus_create_simple("pl011", 0x10009000, pic[12]);
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
/* DMA controller is optional, apparently. */
sysbus_create_simple("pl081", 0x10030000, pic[24]);
sysbus_create_simple("sp804", 0x10011000, pic[4]);
sysbus_create_simple("sp804", 0x10012000, pic[5]);
sysbus_create_simple("pl110_versatile", 0x10020000, pic[23]);
sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
sysbus_create_simple("pl031", 0x10017000, pic[10]);
if (!is_pb) {
dev = sysbus_create_varargs("realview_pci", 0x60000000,
pic[48], pic[49], pic[50], pic[51], NULL);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, -1);
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if ((!nd->model && !done_nic)
|| strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0) {
if (is_pb) {
lan9118_init(nd, 0x4e000000, pic[28]);
} else {
smc91c111_init(nd, 0x4e000000, pic[28]);
}
done_nic = 1;
} else {
pci_nic_init_nofail(nd, "rtl8139", NULL);
}
}
dev = sysbus_create_simple("realview_i2c", 0x10002000, NULL);
i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
i2c_create_slave(i2c, "ds1338", 0x68);
ide = drive_get(IF_IDE, 0, 0);
ide2 = drive_get(IF_IDE, 0, 1);
mmio_ide_init(0x18000000, 0x18000100, 0, 1, ide, ide2);
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
/* 0x10001000 System controller. */
/* 0x10002000 Two-Wire Serial Bus. */
/* 0x10003000 Reserved. */
/* 0x10004000 AACI. */
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
/* 0x10008000 Character LCD. (EB) */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
/* 0x1000c000 UART3. */
/* 0x1000d000 SSPI. */
/* 0x1000e000 SCI. */
/* 0x1000f000 Reserved. */
/* 0x10010000 Watchdog. */
/* 0x10011000 Timer 0+1. */
/* 0x10012000 Timer 2+3. */
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
/* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
/* 0x10040000 GIC1. (EB) */
/* 0x10050000 GIC2. (EB) */
/* 0x10060000 GIC3. (EB) */
/* 0x10070000 GIC4. (EB) */
/* 0x10080000 SMC. */
/* 0x1e000000 GIC1. (PB) */
/* 0x1e001000 GIC2. (PB) */
/* 0x1e002000 GIC3. (PB) */
/* 0x1e003000 GIC4. (PB) */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
/* 0x4c000000 Configuration flash. */
/* 0x4e000000 Ethernet. */
/* 0x4f000000 USB. */
/* 0x50000000 PISMO. */
/* 0x54000000 PISMO. */
/* 0x58000000 PISMO. */
/* 0x5c000000 PISMO. */
/* 0x60000000 PCI. */
/* 0x61000000 PCI Self Config. */
/* 0x62000000 PCI Config. */
/* 0x63000000 PCI IO. */
/* 0x64000000 PCI mem 0. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
ram_offset = qemu_ram_alloc(NULL, "realview.hack", 0x1000);
cpu_register_physical_memory(SMP_BOOT_ADDR, 0x1000,
ram_offset | IO_MEM_RAM);
realview_binfo.ram_size = ram_size;
realview_binfo.kernel_filename = kernel_filename;
realview_binfo.kernel_cmdline = kernel_cmdline;
realview_binfo.initrd_filename = initrd_filename;
realview_binfo.nb_cpus = smp_cpus;
realview_binfo.board_id = realview_board_id[board_type];
realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
arm_load_kernel(first_cpu, &realview_binfo);
}