static void i82801ix_lock_smm(struct device *dev)
{
#if TEST_SMM_FLASH_LOCKDOWN
u8 reg8;
#endif
if (!acpi_is_wakeup_s3()) {
#if ENABLE_ACPI_MODE_IN_COREBOOT
printk(BIOS_DEBUG, "Enabling ACPI via APMC:\n");
outb(APM_CNT_ACPI_ENABLE, APM_CNT); // Enable ACPI mode
printk(BIOS_DEBUG, "done.\n");
#else
printk(BIOS_DEBUG, "Disabling ACPI via APMC:\n");
outb(APM_CNT_ACPI_DISABLE, APM_CNT); // Disable ACPI mode
printk(BIOS_DEBUG, "done.\n");
#endif
} else {
printk(BIOS_DEBUG, "S3 wakeup, enabling ACPI via APMC\n");
outb(APM_CNT_ACPI_ENABLE, APM_CNT);
}
/* Don't allow evil boot loaders, kernels, or
* userspace applications to deceive us:
*/
smm_lock();
#if TEST_SMM_FLASH_LOCKDOWN
/* Now try this: */
printk(BIOS_DEBUG, "Locking BIOS to RO... ");
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
(reg8&1)?"rw":"ro");
reg8 &= ~(1 << 0); /* clear BIOSWE */
pci_write_config8(dev, 0xdc, reg8);
reg8 |= (1 << 1); /* set BLE */
pci_write_config8(dev, 0xdc, reg8);
printk(BIOS_DEBUG, "ok.\n");
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
(reg8&1)?"rw":"ro");
printk(BIOS_DEBUG, "Writing:\n");
*(volatile u8 *)0xfff00000 = 0x00;
printk(BIOS_DEBUG, "Testing:\n");
reg8 |= (1 << 0); /* set BIOSWE */
pci_write_config8(dev, 0xdc, reg8);
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
printk(BIOS_DEBUG, " BLE: %s; BWE: %s\n", (reg8&2)?"on":"off",
(reg8&1)?"rw":"ro");
printk(BIOS_DEBUG, "Done.\n");
#endif
}
static void pch_lock_smm(pci_dev_t dev)
{
#if TEST_SMM_FLASH_LOCKDOWN
u8 reg8;
#endif
if (acpi_slp_type != 3) {
#if ENABLE_ACPI_MODE_IN_COREBOOT
debug("Enabling ACPI via APMC:\n");
outb(0xe1, 0xb2); /* Enable ACPI mode */
debug("done.\n");
#else
debug("Disabling ACPI via APMC:\n");
outb(0x1e, 0xb2); /* Disable ACPI mode */
debug("done.\n");
#endif
}
/* Don't allow evil boot loaders, kernels, or
* userspace applications to deceive us:
*/
smm_lock();
#if TEST_SMM_FLASH_LOCKDOWN
/* Now try this: */
debug("Locking BIOS to RO... ");
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
reg8 &= ~(1 << 0); /* clear BIOSWE */
pci_write_config8(dev, 0xdc, reg8);
reg8 |= (1 << 1); /* set BLE */
pci_write_config8(dev, 0xdc, reg8);
debug("ok.\n");
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
debug("Writing:\n");
writeb(0, 0xfff00000);
debug("Testing:\n");
reg8 |= (1 << 0); /* set BIOSWE */
pci_write_config8(dev, 0xdc, reg8);
reg8 = pci_read_config8(dev, 0xdc); /* BIOS_CNTL */
debug(" BLE: %s; BWE: %s\n", (reg8 & 2) ? "on" : "off",
(reg8 & 1) ? "rw" : "ro");
debug("Done.\n");
#endif
}
static void post_mp_init(void)
{
/* Set Max Ratio */
cpu_set_max_ratio();
/*
* Now that all APs have been relocated as well as the BSP let SMIs
* start flowing.
*/
smm_southbridge_enable(PWRBTN_EN | GBL_EN);
/* Lock down the SMRAM space. */
smm_lock();
}
