int sqlite3CodecAttach(sqlite3* db, int nDb, const void *zKey, int nKey) {
struct Db *pDb = &db->aDb[nDb];
CODEC_TRACE(("sqlite3CodecAttach: entered nDb=%d zKey=%s, nKey=%d\n", nDb, zKey, nKey));
sqlcipher_activate();
if(nKey && zKey && pDb->pBt) {
int rc;
Pager *pPager = pDb->pBt->pBt->pPager;
sqlite3_file *fd = sqlite3Pager_get_fd(pPager);
codec_ctx *ctx;
/* point the internal codec argument against the contet to be prepared */
rc = sqlcipher_codec_ctx_init(&ctx, pDb, pDb->pBt->pBt->pPager, fd, zKey, nKey);
sqlite3pager_sqlite3PagerSetCodec(sqlite3BtreePager(pDb->pBt), sqlite3Codec, NULL, sqlite3FreeCodecArg, (void *) ctx);
codec_set_btree_to_codec_pagesize(db, pDb, ctx);
/* if fd is null, then this is an in-memory database and
we dont' want to overwrite the AutoVacuum settings
if not null, then set to the default */
sqlite3_mutex_enter(db->mutex);
if(fd != NULL) {
sqlite3BtreeSetAutoVacuum(pDb->pBt, SQLITE_DEFAULT_AUTOVACUUM);
}
sqlite3_mutex_leave(db->mutex);
}
return SQLITE_OK;
}
int sqlite3CodecAttach(sqlite3* db, int nDb, const void *pKey, int nKey)
{
struct Db *pDb = &db->aDb[nDb];
//RAWLOG_INFO("sqlite3CodecAttach");
if ( nKey && pKey && pDb->pBt )
{
Pager *pPager = sqlite3BtreePager(pDb->pBt);
sqlite3_file *fd;
CRhoSqliteCodecCtx* pRhoCtx = sqlite3Malloc(sizeof(CRhoSqliteCodecCtx));
memset(pRhoCtx, 0, sizeof(CRhoSqliteCodecCtx));
pRhoCtx->m_szPartition = sqlite3Malloc(nKey);
memcpy(pRhoCtx->m_szPartition, pKey, nKey);
pRhoCtx->m_nPartLen = nKey;
pRhoCtx->m_pPageBuffer = sqlite3Malloc(SQLITE_DEFAULT_PAGE_SIZE);
sqlite3PagerSetCodec( pPager, sqlite3Codec, NULL, sqlite3FreeCodecArg, (void *)pRhoCtx );
fd = (isOpen(pPager->fd)) ? pPager->fd : NULL;
sqlite3_mutex_enter(db->mutex);
/* Always overwrite page size and set to the default because the first page of the database
in encrypted and thus sqlite can't effectively determine the pagesize. this causes an issue in
cases where bytes 16 & 17 of the page header are a power of 2 as reported by John Lehman
Note: before forcing the page size we need to force pageSizeFixed to 0, else
sqliteBtreeSetPageSize will block the change
*/
pDb->pBt->pBt->pageSizeFixed = 0;
sqlite3BtreeSetPageSize( pDb->pBt, SQLITE_DEFAULT_PAGE_SIZE, EVP_MAX_IV_LENGTH, 0 );
/* if fd is null, then this is an in-memory database and
we dont' want to overwrite the AutoVacuum settings
if not null, then set to the default */
if ( fd != NULL )
sqlite3BtreeSetAutoVacuum(pDb->pBt, SQLITE_DEFAULT_AUTOVACUUM);
sqlite3_mutex_leave(db->mutex);
}
return SQLITE_OK;
}
int sqlite3CodecAttach(sqlite3* db, int nDb, const void *zKey, int nKey) {
struct Db *pDb = &db->aDb[nDb];
CODEC_TRACE(("sqlite3CodecAttach: entered nDb=%d zKey=%s, nKey=%d\n", nDb, (char *)zKey, nKey));
if(nKey && zKey && pDb->pBt) {
int rc;
Pager *pPager = pDb->pBt->pBt->pPager;
sqlite3_file *fd = sqlite3Pager_get_fd(pPager);
codec_ctx *ctx;
sqlcipher_activate(); /* perform internal initialization for sqlcipher */
sqlite3_mutex_enter(db->mutex);
/* point the internal codec argument against the contet to be prepared */
rc = sqlcipher_codec_ctx_init(&ctx, pDb, pDb->pBt->pBt->pPager, fd, zKey, nKey);
if(rc != SQLITE_OK) return rc; /* initialization failed, do not attach potentially corrupted context */
sqlite3pager_sqlite3PagerSetCodec(sqlite3BtreePager(pDb->pBt), sqlite3Codec, NULL, sqlite3FreeCodecArg, (void *) ctx);
codec_set_btree_to_codec_pagesize(db, pDb, ctx);
/* force secure delete. This has the benefit of wiping internal data when deleted
and also ensures that all pages are written to disk (i.e. not skipped by
sqlite3PagerDontWrite optimizations) */
sqlite3BtreeSecureDelete(pDb->pBt, 1);
/* if fd is null, then this is an in-memory database and
we dont' want to overwrite the AutoVacuum settings
if not null, then set to the default */
if(fd != NULL) {
sqlite3BtreeSetAutoVacuum(pDb->pBt, SQLITE_DEFAULT_AUTOVACUUM);
}
sqlite3_mutex_leave(db->mutex);
}
return SQLITE_OK;
}
/*
** This routine implements the OP_Vacuum opcode of the VDBE.
*/
int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db){
int rc = SQLITE_OK; /* Return code from service routines */
const char *zFilename; /* full pathname of the database file */
int nFilename; /* number of characters in zFilename[] */
char *zTemp = 0; /* a temporary file in same directory as zFilename */
Btree *pMain; /* The database being vacuumed */
Btree *pTemp;
char *zSql = 0;
int saved_flags; /* Saved value of the db->flags */
Db *pDb = 0; /* Database to detach at end of vacuum */
/* Save the current value of the write-schema flag before setting it. */
saved_flags = db->flags;
db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks;
if( !db->autoCommit ){
sqlite3SetString(pzErrMsg, "cannot VACUUM from within a transaction",
(char*)0);
rc = SQLITE_ERROR;
goto end_of_vacuum;
}
/* Get the full pathname of the database file and create a
** temporary filename in the same directory as the original file.
*/
pMain = db->aDb[0].pBt;
zFilename = sqlite3BtreeGetFilename(pMain);
assert( zFilename );
if( zFilename[0]=='\0' ){
/* The in-memory database. Do nothing. Return directly to avoid causing
** an error trying to DETACH the vacuum_db (which never got attached)
** in the exit-handler.
*/
return SQLITE_OK;
}
nFilename = strlen(zFilename);
zTemp = sqliteMalloc( nFilename+100 );
if( zTemp==0 ){
rc = SQLITE_NOMEM;
goto end_of_vacuum;
}
strcpy(zTemp, zFilename);
/* The randomName() procedure in the following loop uses an excellent
** source of randomness to generate a name from a space of 1.3e+31
** possibilities. So unless the directory already contains on the order
** of 1.3e+31 files, the probability that the following loop will
** run more than once or twice is vanishingly small. We are certain
** enough that this loop will always terminate (and terminate quickly)
** that we don't even bother to set a maximum loop count.
*/
do {
zTemp[nFilename] = '-';
randomName((unsigned char*)&zTemp[nFilename+1]);
} while( sqlite3OsFileExists(zTemp) );
/* Attach the temporary database as 'vacuum_db'. The synchronous pragma
** can be set to 'off' for this file, as it is not recovered if a crash
** occurs anyway. The integrity of the database is maintained by a
** (possibly synchronous) transaction opened on the main database before
** sqlite3BtreeCopyFile() is called.
**
** An optimisation would be to use a non-journaled pager.
*/
zSql = sqlite3MPrintf("ATTACH '%q' AS vacuum_db;", zTemp);
if( !zSql ){
rc = SQLITE_NOMEM;
goto end_of_vacuum;
}
rc = execSql(db, zSql);
sqliteFree(zSql);
zSql = 0;
if( rc!=SQLITE_OK ) goto end_of_vacuum;
pDb = &db->aDb[db->nDb-1];
assert( strcmp(db->aDb[db->nDb-1].zName,"vacuum_db")==0 );
pTemp = db->aDb[db->nDb-1].pBt;
sqlite3BtreeSetPageSize(pTemp, sqlite3BtreeGetPageSize(pMain),
sqlite3BtreeGetReserve(pMain));
assert( sqlite3BtreeGetPageSize(pTemp)==sqlite3BtreeGetPageSize(pMain) );
rc = execSql(db, "PRAGMA vacuum_db.synchronous=OFF");
if( rc!=SQLITE_OK ){
goto end_of_vacuum;
}
#ifndef SQLITE_OMIT_AUTOVACUUM
sqlite3BtreeSetAutoVacuum(pTemp, sqlite3BtreeGetAutoVacuum(pMain));
#endif
/* Begin a transaction */
rc = execSql(db, "BEGIN EXCLUSIVE;");
if( rc!=SQLITE_OK ) goto end_of_vacuum;
/* Query the schema of the main database. Create a mirror schema
** in the temporary database.
*/
rc = execExecSql(db,
"SELECT 'CREATE TABLE vacuum_db.' || substr(sql,14,100000000) "
" FROM sqlite_master WHERE type='table' AND name!='sqlite_sequence'"
" AND rootpage>0"
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = execExecSql(db,
"SELECT 'CREATE INDEX vacuum_db.' || substr(sql,14,100000000)"
" FROM sqlite_master WHERE sql LIKE 'CREATE INDEX %' ");
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = execExecSql(db,
"SELECT 'CREATE UNIQUE INDEX vacuum_db.' || substr(sql,21,100000000) "
" FROM sqlite_master WHERE sql LIKE 'CREATE UNIQUE INDEX %'");
if( rc!=SQLITE_OK ) goto end_of_vacuum;
/* Loop through the tables in the main database. For each, do
** an "INSERT INTO vacuum_db.xxx SELECT * FROM xxx;" to copy
** the contents to the temporary database.
*/
rc = execExecSql(db,
"SELECT 'INSERT INTO vacuum_db.' || quote(name) "
"|| ' SELECT * FROM ' || quote(name) || ';'"
"FROM sqlite_master "
"WHERE type = 'table' AND name!='sqlite_sequence' "
" AND rootpage>0"
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
/* Copy over the sequence table
*/
rc = execExecSql(db,
"SELECT 'DELETE FROM vacuum_db.' || quote(name) || ';' "
"FROM vacuum_db.sqlite_master WHERE name='sqlite_sequence' "
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = execExecSql(db,
"SELECT 'INSERT INTO vacuum_db.' || quote(name) "
"|| ' SELECT * FROM ' || quote(name) || ';' "
"FROM vacuum_db.sqlite_master WHERE name=='sqlite_sequence';"
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
/* Copy the triggers, views, and virtual tables from the main database
** over to the temporary database. None of these objects has any
** associated storage, so all we have to do is copy their entries
** from the SQLITE_MASTER table.
*/
rc = execSql(db,
"INSERT INTO vacuum_db.sqlite_master "
" SELECT type, name, tbl_name, rootpage, sql"
" FROM sqlite_master"
" WHERE type='view' OR type='trigger'"
" OR (type='table' AND rootpage=0)"
);
if( rc ) goto end_of_vacuum;
/* At this point, unless the main db was completely empty, there is now a
** transaction open on the vacuum database, but not on the main database.
** Open a btree level transaction on the main database. This allows a
** call to sqlite3BtreeCopyFile(). The main database btree level
** transaction is then committed, so the SQL level never knows it was
** opened for writing. This way, the SQL transaction used to create the
** temporary database never needs to be committed.
*/
if( rc==SQLITE_OK ){
u32 meta;
int i;
/* This array determines which meta meta values are preserved in the
** vacuum. Even entries are the meta value number and odd entries
** are an increment to apply to the meta value after the vacuum.
** The increment is used to increase the schema cookie so that other
** connections to the same database will know to reread the schema.
*/
static const unsigned char aCopy[] = {
1, 1, /* Add one to the old schema cookie */
3, 0, /* Preserve the default page cache size */
5, 0, /* Preserve the default text encoding */
6, 0, /* Preserve the user version */
};
assert( 1==sqlite3BtreeIsInTrans(pTemp) );
assert( 1==sqlite3BtreeIsInTrans(pMain) );
/* Copy Btree meta values */
for(i=0; i<sizeof(aCopy)/sizeof(aCopy[0]); i+=2){
rc = sqlite3BtreeGetMeta(pMain, aCopy[i], &meta);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = sqlite3BtreeUpdateMeta(pTemp, aCopy[i], meta+aCopy[i+1]);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
}
rc = sqlite3BtreeCopyFile(pMain, pTemp);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = sqlite3BtreeCommit(pTemp);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = sqlite3BtreeCommit(pMain);
}
end_of_vacuum:
/* Restore the original value of db->flags */
db->flags = saved_flags;
/* Currently there is an SQL level transaction open on the vacuum
** database. No locks are held on any other files (since the main file
** was committed at the btree level). So it safe to end the transaction
** by manually setting the autoCommit flag to true and detaching the
** vacuum database. The vacuum_db journal file is deleted when the pager
** is closed by the DETACH.
*/
db->autoCommit = 1;
if( pDb ){
sqlite3MallocDisallow();
sqlite3BtreeClose(pDb->pBt);
sqlite3MallocAllow();
pDb->pBt = 0;
pDb->pSchema = 0;
}
if( zTemp ){
sqlite3OsDelete(zTemp);
sqliteFree(zTemp);
}
sqliteFree( zSql );
sqlite3ResetInternalSchema(db, 0);
return rc;
}
/*
** Process a pragma statement.
**
** Pragmas are of this form:
**
** PRAGMA [database.]id [= value]
**
** The identifier might also be a string. The value is a string, and
** identifier, or a number. If minusFlag is true, then the value is
** a number that was preceded by a minus sign.
**
** If the left side is "database.id" then pId1 is the database name
** and pId2 is the id. If the left side is just "id" then pId1 is the
** id and pId2 is any empty string.
*/
void sqlite3Pragma(
Parse *pParse,
Token *pId1, /* First part of [database.]id field */
Token *pId2, /* Second part of [database.]id field, or NULL */
Token *pValue, /* Token for <value>, or NULL */
int minusFlag /* True if a '-' sign preceded <value> */
){
char *zLeft = 0; /* Nul-terminated UTF-8 string <id> */
char *zRight = 0; /* Nul-terminated UTF-8 string <value>, or NULL */
const char *zDb = 0; /* The database name */
Token *pId; /* Pointer to <id> token */
int iDb; /* Database index for <database> */
sqlite3 *db = pParse->db;
Db *pDb;
Vdbe *v = sqlite3GetVdbe(pParse);
if( v==0 ) return;
/* Interpret the [database.] part of the pragma statement. iDb is the
** index of the database this pragma is being applied to in db.aDb[]. */
iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId);
if( iDb<0 ) return;
pDb = &db->aDb[iDb];
zLeft = sqlite3NameFromToken(pId);
if( !zLeft ) return;
if( minusFlag ){
zRight = sqlite3MPrintf("-%T", pValue);
}else{
zRight = sqlite3NameFromToken(pValue);
}
zDb = ((iDb>0)?pDb->zName:0);
if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){
goto pragma_out;
}
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]default_cache_size
** PRAGMA [database.]default_cache_size=N
**
** The first form reports the current persistent setting for the
** page cache size. The value returned is the maximum number of
** pages in the page cache. The second form sets both the current
** page cache size value and the persistent page cache size value
** stored in the database file.
**
** The default cache size is stored in meta-value 2 of page 1 of the
** database file. The cache size is actually the absolute value of
** this memory location. The sign of meta-value 2 determines the
** synchronous setting. A negative value means synchronous is off
** and a positive value means synchronous is on.
*/
if( sqlite3StrICmp(zLeft,"default_cache_size")==0 ){
static const VdbeOpList getCacheSize[] = {
{ OP_ReadCookie, 0, 2, 0}, /* 0 */
{ OP_AbsValue, 0, 0, 0},
{ OP_Dup, 0, 0, 0},
{ OP_Integer, 0, 0, 0},
{ OP_Ne, 0, 6, 0},
{ OP_Integer, 0, 0, 0}, /* 5 */
{ OP_Callback, 1, 0, 0},
};
int addr;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", P3_STATIC);
addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+5, MAX_PAGES);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3VdbeAddOp(v, OP_Integer, size, 0);
sqlite3VdbeAddOp(v, OP_ReadCookie, iDb, 2);
addr = sqlite3VdbeAddOp(v, OP_Integer, 0, 0);
sqlite3VdbeAddOp(v, OP_Ge, 0, addr+3);
sqlite3VdbeAddOp(v, OP_Negative, 0, 0);
sqlite3VdbeAddOp(v, OP_SetCookie, iDb, 2);
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA [database.]page_size
** PRAGMA [database.]page_size=N
**
** The first form reports the current setting for the
** database page size in bytes. The second form sets the
** database page size value. The value can only be set if
** the database has not yet been created.
*/
if( sqlite3StrICmp(zLeft,"page_size")==0 ){
Btree *pBt = pDb->pBt;
if( !zRight ){
int size = pBt ? sqlite3BtreeGetPageSize(pBt) : 0;
returnSingleInt(pParse, "page_size", size);
}else{
sqlite3BtreeSetPageSize(pBt, atoi(zRight), -1);
}
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
/*
** PRAGMA [database.]auto_vacuum
** PRAGMA [database.]auto_vacuum=N
**
** Get or set the (boolean) value of the database 'auto-vacuum' parameter.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
if( sqlite3StrICmp(zLeft,"auto_vacuum")==0 ){
Btree *pBt = pDb->pBt;
if( !zRight ){
int auto_vacuum =
pBt ? sqlite3BtreeGetAutoVacuum(pBt) : SQLITE_DEFAULT_AUTOVACUUM;
returnSingleInt(pParse, "auto_vacuum", auto_vacuum);
}else{
sqlite3BtreeSetAutoVacuum(pBt, getBoolean(zRight));
}
}else
#endif
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]cache_size
** PRAGMA [database.]cache_size=N
**
** The first form reports the current local setting for the
** page cache size. The local setting can be different from
** the persistent cache size value that is stored in the database
** file itself. The value returned is the maximum number of
** pages in the page cache. The second form sets the local
** page cache size value. It does not change the persistent
** cache size stored on the disk so the cache size will revert
** to its default value when the database is closed and reopened.
** N should be a positive integer.
*/
if( sqlite3StrICmp(zLeft,"cache_size")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA temp_store
** PRAGMA temp_store = "default"|"memory"|"file"
**
** Return or set the local value of the temp_store flag. Changing
** the local value does not make changes to the disk file and the default
** value will be restored the next time the database is opened.
**
** Note that it is possible for the library compile-time options to
** override this setting
*/
if( sqlite3StrICmp(zLeft, "temp_store")==0 ){
if( !zRight ){
returnSingleInt(pParse, "temp_store", db->temp_store);
}else{
changeTempStorage(pParse, zRight);
}
}else
/*
** PRAGMA temp_store_directory
** PRAGMA temp_store_directory = ""|"directory_name"
**
** Return or set the local value of the temp_store_directory flag. Changing
** the value sets a specific directory to be used for temporary files.
** Setting to a null string reverts to the default temporary directory search.
** If temporary directory is changed, then invalidateTempStorage.
**
*/
if( sqlite3StrICmp(zLeft, "temp_store_directory")==0 ){
if( !zRight ){
if( sqlite3_temp_directory ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME,
"temp_store_directory", P3_STATIC);
sqlite3VdbeOp3(v, OP_String8, 0, 0, sqlite3_temp_directory, 0);
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
}
}else{
if( zRight[0] && !sqlite3OsIsDirWritable(zRight) ){
sqlite3ErrorMsg(pParse, "not a writable directory");
goto pragma_out;
}
if( TEMP_STORE==0
|| (TEMP_STORE==1 && db->temp_store<=1)
|| (TEMP_STORE==2 && db->temp_store==1)
){
invalidateTempStorage(pParse);
}
sqliteFree(sqlite3_temp_directory);
if( zRight[0] ){
sqlite3_temp_directory = zRight;
zRight = 0;
}else{
sqlite3_temp_directory = 0;
}
}
}else
/*
** PRAGMA [database.]synchronous
** PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL
**
** Return or set the local value of the synchronous flag. Changing
** the local value does not make changes to the disk file and the
** default value will be restored the next time the database is
** opened.
*/
if( sqlite3StrICmp(zLeft,"synchronous")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "synchronous", pDb->safety_level-1);
}else{
if( !db->autoCommit ){
sqlite3ErrorMsg(pParse,
"Safety level may not be changed inside a transaction");
}else{
pDb->safety_level = getSafetyLevel(zRight)+1;
}
}
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
#ifndef SQLITE_OMIT_FLAG_PRAGMAS
if( flagPragma(pParse, zLeft, zRight) ){
/* The flagPragma() subroutine also generates any necessary code
** there is nothing more to do here */
}else
#endif /* SQLITE_OMIT_FLAG_PRAGMAS */
#ifndef SQLITE_OMIT_SCHEMA_PRAGMAS
/*
** PRAGMA table_info(<table>)
**
** Return a single row for each column of the named table. The columns of
** the returned data set are:
**
** cid: Column id (numbered from left to right, starting at 0)
** name: Column name
** type: Column declaration type.
** notnull: True if 'NOT NULL' is part of column declaration
** dflt_value: The default value for the column, if any.
*/
if( sqlite3StrICmp(zLeft, "table_info")==0 && zRight ){
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
int i;
Column *pCol;
sqlite3VdbeSetNumCols(v, 6);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cid", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "type", P3_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "notnull", P3_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "dflt_value", P3_STATIC);
sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "pk", P3_STATIC);
sqlite3ViewGetColumnNames(pParse, pTab);
for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pCol->zName, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
pCol->zType ? pCol->zType : "numeric", 0);
sqlite3VdbeAddOp(v, OP_Integer, pCol->notNull, 0);
sqlite3ExprCode(pParse, pCol->pDflt);
sqlite3VdbeAddOp(v, OP_Integer, pCol->isPrimKey, 0);
sqlite3VdbeAddOp(v, OP_Callback, 6, 0);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_info")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pIdx = sqlite3FindIndex(db, zRight, zDb);
if( pIdx ){
int i;
pTab = pIdx->pTable;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seqno", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "cid", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "name", P3_STATIC);
for(i=0; i<pIdx->nColumn; i++){
int cnum = pIdx->aiColumn[i];
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeAddOp(v, OP_Integer, cnum, 0);
assert( pTab->nCol>cnum );
sqlite3VdbeOp3(v, OP_String8, 0, 0, pTab->aCol[cnum].zName, 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_list")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pIdx = pTab->pIndex;
if( pIdx ){
int i = 0;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "unique", P3_STATIC);
while(pIdx){
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pIdx->zName, 0);
sqlite3VdbeAddOp(v, OP_Integer, pIdx->onError!=OE_None, 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
++i;
pIdx = pIdx->pNext;
}
}
}
}else
if( sqlite3StrICmp(zLeft, "database_list")==0 ){
int i;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 3);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "file", P3_STATIC);
for(i=0; i<db->nDb; i++){
if( db->aDb[i].pBt==0 ) continue;
assert( db->aDb[i].zName!=0 );
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, db->aDb[i].zName, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
sqlite3BtreeGetFilename(db->aDb[i].pBt), 0);
sqlite3VdbeAddOp(v, OP_Callback, 3, 0);
}
}else
if( sqlite3StrICmp(zLeft, "collation_list")==0 ){
int i = 0;
HashElem *p;
sqlite3VdbeSetNumCols(v, 2);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P3_STATIC);
for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){
CollSeq *pColl = (CollSeq *)sqliteHashData(p);
sqlite3VdbeAddOp(v, OP_Integer, i++, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pColl->zName, 0);
sqlite3VdbeAddOp(v, OP_Callback, 2, 0);
}
}else
#endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */
#ifndef SQLITE_OMIT_FOREIGN_KEY
if( sqlite3StrICmp(zLeft, "foreign_key_list")==0 && zRight ){
FKey *pFK;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pFK = pTab->pFKey;
if( pFK ){
int i = 0;
sqlite3VdbeSetNumCols(v, 5);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "id", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "seq", P3_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "table", P3_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "from", P3_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "to", P3_STATIC);
while(pFK){
int j;
for(j=0; j<pFK->nCol; j++){
char *zCol = pFK->aCol[j].zCol;
sqlite3VdbeAddOp(v, OP_Integer, i, 0);
sqlite3VdbeAddOp(v, OP_Integer, j, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0, pFK->zTo, 0);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
pTab->aCol[pFK->aCol[j].iFrom].zName, 0);
sqlite3VdbeOp3(v, zCol ? OP_String8 : OP_Null, 0, 0, zCol, 0);
sqlite3VdbeAddOp(v, OP_Callback, 5, 0);
}
++i;
pFK = pFK->pNextFrom;
}
}
}
}else
#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */
#ifndef NDEBUG
if( sqlite3StrICmp(zLeft, "parser_trace")==0 ){
extern void sqlite3ParserTrace(FILE*, char *);
if( zRight ){
if( getBoolean(zRight) ){
sqlite3ParserTrace(stderr, "parser: ");
}else{
sqlite3ParserTrace(0, 0);
}
}
}else
#endif
/* Reinstall the LIKE and GLOB functions. The variant of LIKE
** used will be case sensitive or not depending on the RHS.
*/
if( sqlite3StrICmp(zLeft, "case_sensitive_like")==0 ){
if( zRight ){
sqlite3RegisterLikeFunctions(db, getBoolean(zRight));
}
}else
#ifndef SQLITE_OMIT_INTEGRITY_CHECK
if( sqlite3StrICmp(zLeft, "integrity_check")==0 ){
int i, j, addr;
/* Code that appears at the end of the integrity check. If no error
** messages have been generated, output OK. Otherwise output the
** error message
*/
static const VdbeOpList endCode[] = {
{ OP_MemLoad, 0, 0, 0},
{ OP_Integer, 0, 0, 0},
{ OP_Ne, 0, 0, 0}, /* 2 */
{ OP_String8, 0, 0, "ok"},
{ OP_Callback, 1, 0, 0},
};
/* Initialize the VDBE program */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "integrity_check", P3_STATIC);
sqlite3VdbeAddOp(v, OP_MemInt, 0, 0); /* Initialize error count to 0 */
/* Do an integrity check on each database file */
for(i=0; i<db->nDb; i++){
HashElem *x;
Hash *pTbls;
int cnt = 0;
if( OMIT_TEMPDB && i==1 ) continue;
sqlite3CodeVerifySchema(pParse, i);
/* Do an integrity check of the B-Tree
*/
pTbls = &db->aDb[i].pSchema->tblHash;
for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
sqlite3VdbeAddOp(v, OP_Integer, pTab->tnum, 0);
cnt++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
sqlite3VdbeAddOp(v, OP_Integer, pIdx->tnum, 0);
cnt++;
}
}
assert( cnt>0 );
sqlite3VdbeAddOp(v, OP_IntegrityCk, cnt, i);
sqlite3VdbeAddOp(v, OP_Dup, 0, 1);
addr = sqlite3VdbeOp3(v, OP_String8, 0, 0, "ok", P3_STATIC);
sqlite3VdbeAddOp(v, OP_Eq, 0, addr+7);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
sqlite3MPrintf("*** in database %s ***\n", db->aDb[i].zName),
P3_DYNAMIC);
sqlite3VdbeAddOp(v, OP_Pull, 1, 0);
sqlite3VdbeAddOp(v, OP_Concat, 0, 1);
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
sqlite3VdbeAddOp(v, OP_MemIncr, 1, 0);
/* Make sure all the indices are constructed correctly.
*/
sqlite3CodeVerifySchema(pParse, i);
for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
int loopTop;
if( pTab->pIndex==0 ) continue;
sqlite3OpenTableAndIndices(pParse, pTab, 1, OP_OpenRead);
sqlite3VdbeAddOp(v, OP_MemInt, 0, 1);
loopTop = sqlite3VdbeAddOp(v, OP_Rewind, 1, 0);
sqlite3VdbeAddOp(v, OP_MemIncr, 1, 1);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int jmp2;
static const VdbeOpList idxErr[] = {
{ OP_MemIncr, 1, 0, 0},
{ OP_String8, 0, 0, "rowid "},
{ OP_Rowid, 1, 0, 0},
{ OP_String8, 0, 0, " missing from index "},
{ OP_String8, 0, 0, 0}, /* 4 */
{ OP_Concat, 2, 0, 0},
{ OP_Callback, 1, 0, 0},
};
sqlite3GenerateIndexKey(v, pIdx, 1);
jmp2 = sqlite3VdbeAddOp(v, OP_Found, j+2, 0);
addr = sqlite3VdbeAddOpList(v, ArraySize(idxErr), idxErr);
sqlite3VdbeChangeP3(v, addr+4, pIdx->zName, P3_STATIC);
sqlite3VdbeJumpHere(v, jmp2);
}
sqlite3VdbeAddOp(v, OP_Next, 1, loopTop+1);
sqlite3VdbeJumpHere(v, loopTop);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
static const VdbeOpList cntIdx[] = {
{ OP_MemInt, 0, 2, 0},
{ OP_Rewind, 0, 0, 0}, /* 1 */
{ OP_MemIncr, 1, 2, 0},
{ OP_Next, 0, 0, 0}, /* 3 */
{ OP_MemLoad, 1, 0, 0},
{ OP_MemLoad, 2, 0, 0},
{ OP_Eq, 0, 0, 0}, /* 6 */
{ OP_MemIncr, 1, 0, 0},
{ OP_String8, 0, 0, "wrong # of entries in index "},
{ OP_String8, 0, 0, 0}, /* 9 */
{ OP_Concat, 0, 0, 0},
{ OP_Callback, 1, 0, 0},
};
if( pIdx->tnum==0 ) continue;
addr = sqlite3VdbeAddOpList(v, ArraySize(cntIdx), cntIdx);
sqlite3VdbeChangeP1(v, addr+1, j+2);
sqlite3VdbeChangeP2(v, addr+1, addr+4);
sqlite3VdbeChangeP1(v, addr+3, j+2);
sqlite3VdbeChangeP2(v, addr+3, addr+2);
sqlite3VdbeJumpHere(v, addr+6);
sqlite3VdbeChangeP3(v, addr+9, pIdx->zName, P3_STATIC);
}
}
}
addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode);
sqlite3VdbeJumpHere(v, addr+2);
}else
#endif /* SQLITE_OMIT_INTEGRITY_CHECK */
#ifndef SQLITE_OMIT_UTF16
/*
** PRAGMA encoding
** PRAGMA encoding = "utf-8"|"utf-16"|"utf-16le"|"utf-16be"
**
** In it's first form, this pragma returns the encoding of the main
** database. If the database is not initialized, it is initialized now.
**
** The second form of this pragma is a no-op if the main database file
** has not already been initialized. In this case it sets the default
** encoding that will be used for the main database file if a new file
** is created. If an existing main database file is opened, then the
** default text encoding for the existing database is used.
**
** In all cases new databases created using the ATTACH command are
** created to use the same default text encoding as the main database. If
** the main database has not been initialized and/or created when ATTACH
** is executed, this is done before the ATTACH operation.
**
** In the second form this pragma sets the text encoding to be used in
** new database files created using this database handle. It is only
** useful if invoked immediately after the main database i
*/
if( sqlite3StrICmp(zLeft, "encoding")==0 ){
static struct EncName {
char *zName;
u8 enc;
} encnames[] = {
{ "UTF-8", SQLITE_UTF8 },
{ "UTF8", SQLITE_UTF8 },
{ "UTF-16le", SQLITE_UTF16LE },
{ "UTF16le", SQLITE_UTF16LE },
{ "UTF-16be", SQLITE_UTF16BE },
{ "UTF16be", SQLITE_UTF16BE },
{ "UTF-16", 0 /* Filled in at run-time */ },
{ "UTF16", 0 /* Filled in at run-time */ },
{ 0, 0 }
};
struct EncName *pEnc;
encnames[6].enc = encnames[7].enc = SQLITE_UTF16NATIVE;
if( !zRight ){ /* "PRAGMA encoding" */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "encoding", P3_STATIC);
sqlite3VdbeAddOp(v, OP_String8, 0, 0);
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( pEnc->enc==ENC(pParse->db) ){
sqlite3VdbeChangeP3(v, -1, pEnc->zName, P3_STATIC);
break;
}
}
sqlite3VdbeAddOp(v, OP_Callback, 1, 0);
}else{ /* "PRAGMA encoding = XXX" */
/* Only change the value of sqlite.enc if the database handle is not
** initialized. If the main database exists, the new sqlite.enc value
** will be overwritten when the schema is next loaded. If it does not
** already exists, it will be created to use the new encoding value.
*/
if(
!(DbHasProperty(db, 0, DB_SchemaLoaded)) ||
DbHasProperty(db, 0, DB_Empty)
){
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( 0==sqlite3StrICmp(zRight, pEnc->zName) ){
ENC(pParse->db) = pEnc->enc;
break;
}
}
if( !pEnc->zName ){
sqlite3ErrorMsg(pParse, "unsupported encoding: %s", zRight);
}
}
}
}else
#endif /* SQLITE_OMIT_UTF16 */
#ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
/*
** PRAGMA [database.]schema_version
** PRAGMA [database.]schema_version = <integer>
**
** PRAGMA [database.]user_version
** PRAGMA [database.]user_version = <integer>
**
** The pragma's schema_version and user_version are used to set or get
** the value of the schema-version and user-version, respectively. Both
** the schema-version and the user-version are 32-bit signed integers
** stored in the database header.
**
** The schema-cookie is usually only manipulated internally by SQLite. It
** is incremented by SQLite whenever the database schema is modified (by
** creating or dropping a table or index). The schema version is used by
** SQLite each time a query is executed to ensure that the internal cache
** of the schema used when compiling the SQL query matches the schema of
** the database against which the compiled query is actually executed.
** Subverting this mechanism by using "PRAGMA schema_version" to modify
** the schema-version is potentially dangerous and may lead to program
** crashes or database corruption. Use with caution!
**
** The user-version is not used internally by SQLite. It may be used by
** applications for any purpose.
*/
if( sqlite3StrICmp(zLeft, "schema_version")==0 ||
sqlite3StrICmp(zLeft, "user_version")==0 ){
int iCookie; /* Cookie index. 0 for schema-cookie, 6 for user-cookie. */
if( zLeft[0]=='s' || zLeft[0]=='S' ){
iCookie = 0;
}else{
iCookie = 5;
}
if( zRight ){
/* Write the specified cookie value */
static const VdbeOpList setCookie[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
{ OP_Integer, 0, 0, 0}, /* 1 */
{ OP_SetCookie, 0, 0, 0}, /* 2 */
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+1, atoi(zRight));
sqlite3VdbeChangeP1(v, addr+2, iDb);
sqlite3VdbeChangeP2(v, addr+2, iCookie);
}else{
/* Read the specified cookie value */
static const VdbeOpList readCookie[] = {
{ OP_ReadCookie, 0, 0, 0}, /* 0 */
{ OP_Callback, 1, 0, 0}
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(readCookie), readCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP2(v, addr, iCookie);
sqlite3VdbeSetNumCols(v, 1);
}
}
#endif /* SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS */
#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
/*
** Report the current state of file logs for all databases
*/
if( sqlite3StrICmp(zLeft, "lock_status")==0 ){
static const char *const azLockName[] = {
"unlocked", "shared", "reserved", "pending", "exclusive"
};
int i;
Vdbe *v = sqlite3GetVdbe(pParse);
sqlite3VdbeSetNumCols(v, 2);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "database", P3_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "status", P3_STATIC);
for(i=0; i<db->nDb; i++){
Btree *pBt;
Pager *pPager;
if( db->aDb[i].zName==0 ) continue;
sqlite3VdbeOp3(v, OP_String8, 0, 0, db->aDb[i].zName, P3_STATIC);
pBt = db->aDb[i].pBt;
if( pBt==0 || (pPager = sqlite3BtreePager(pBt))==0 ){
sqlite3VdbeOp3(v, OP_String8, 0, 0, "closed", P3_STATIC);
}else{
int j = sqlite3pager_lockstate(pPager);
sqlite3VdbeOp3(v, OP_String8, 0, 0,
(j>=0 && j<=4) ? azLockName[j] : "unknown", P3_STATIC);
}
sqlite3VdbeAddOp(v, OP_Callback, 2, 0);
}
}else
#endif
#ifdef SQLITE_SSE
/*
** Check to see if the sqlite_statements table exists. Create it
** if it does not.
*/
if( sqlite3StrICmp(zLeft, "create_sqlite_statement_table")==0 ){
extern int sqlite3CreateStatementsTable(Parse*);
sqlite3CreateStatementsTable(pParse);
}else
#endif
#if SQLITE_HAS_CODEC
if( sqlite3StrICmp(zLeft, "key")==0 ){
sqlite3_key(db, zRight, strlen(zRight));
}else
#endif
{}
if( v ){
/* Code an OP_Expire at the end of each PRAGMA program to cause
** the VDBE implementing the pragma to expire. Most (all?) pragmas
** are only valid for a single execution.
*/
sqlite3VdbeAddOp(v, OP_Expire, 1, 0);
/*
** Reset the safety level, in case the fullfsync flag or synchronous
** setting changed.
*/
if( db->autoCommit ){
sqlite3BtreeSetSafetyLevel(pDb->pBt, pDb->safety_level,
(db->flags&SQLITE_FullFSync)!=0);
}
}
pragma_out:
sqliteFree(zLeft);
sqliteFree(zRight);
}
/*
** This routine implements the OP_Vacuum opcode of the VDBE.
*/
int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db){
int rc = SQLITE_OK; /* Return code from service routines */
Btree *pMain; /* The database being vacuumed */
Pager *pMainPager; /* Pager for database being vacuumed */
Btree *pTemp; /* The temporary database we vacuum into */
char *zSql = 0; /* SQL statements */
int saved_flags; /* Saved value of the db->flags */
int saved_nChange; /* Saved value of db->nChange */
int saved_nTotalChange; /* Saved value of db->nTotalChange */
Db *pDb = 0; /* Database to detach at end of vacuum */
int isMemDb; /* True is vacuuming a :memory: database */
int nRes;
/* Save the current value of the write-schema flag before setting it. */
saved_flags = db->flags;
saved_nChange = db->nChange;
saved_nTotalChange = db->nTotalChange;
db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks;
if( !db->autoCommit ){
sqlite3SetString(pzErrMsg, db, "cannot VACUUM from within a transaction");
rc = SQLITE_ERROR;
goto end_of_vacuum;
}
pMain = db->aDb[0].pBt;
pMainPager = sqlite3BtreePager(pMain);
isMemDb = sqlite3PagerFile(pMainPager)->pMethods==0;
/* Attach the temporary database as 'vacuum_db'. The synchronous pragma
** can be set to 'off' for this file, as it is not recovered if a crash
** occurs anyway. The integrity of the database is maintained by a
** (possibly synchronous) transaction opened on the main database before
** sqlite3BtreeCopyFile() is called.
**
** An optimisation would be to use a non-journaled pager.
** (Later:) I tried setting "PRAGMA vacuum_db.journal_mode=OFF" but
** that actually made the VACUUM run slower. Very little journalling
** actually occurs when doing a vacuum since the vacuum_db is initially
** empty. Only the journal header is written. Apparently it takes more
** time to parse and run the PRAGMA to turn journalling off than it does
** to write the journal header file.
*/
zSql = "ATTACH '' AS vacuum_db;";
rc = execSql(db, zSql);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
pDb = &db->aDb[db->nDb-1];
assert( strcmp(db->aDb[db->nDb-1].zName,"vacuum_db")==0 );
pTemp = db->aDb[db->nDb-1].pBt;
nRes = sqlite3BtreeGetReserve(pMain);
/* A VACUUM cannot change the pagesize of an encrypted database. */
#ifdef SQLITE_HAS_CODEC
if( db->nextPagesize ){
extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*);
int nKey;
char *zKey;
sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
if( nKey ) db->nextPagesize = 0;
}
#endif
if( sqlite3BtreeSetPageSize(pTemp, sqlite3BtreeGetPageSize(pMain), nRes)
|| (!isMemDb && sqlite3BtreeSetPageSize(pTemp, db->nextPagesize, nRes))
|| db->mallocFailed
){
rc = SQLITE_NOMEM;
goto end_of_vacuum;
}
rc = execSql(db, "PRAGMA vacuum_db.synchronous=OFF");
if( rc!=SQLITE_OK ){
goto end_of_vacuum;
}
#ifndef SQLITE_OMIT_AUTOVACUUM
sqlite3BtreeSetAutoVacuum(pTemp, db->nextAutovac>=0 ? db->nextAutovac :
sqlite3BtreeGetAutoVacuum(pMain));
#endif
/* Begin a transaction */
rc = execSql(db, "BEGIN EXCLUSIVE;");
if( rc!=SQLITE_OK ) goto end_of_vacuum;
/* Query the schema of the main database. Create a mirror schema
** in the temporary database.
*/
rc = execExecSql(db,
"SELECT 'CREATE TABLE vacuum_db.' || substr(sql,14) "
" FROM sqlite_master WHERE type='table' AND name!='sqlite_sequence'"
" AND rootpage>0"
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = execExecSql(db,
"SELECT 'CREATE INDEX vacuum_db.' || substr(sql,14)"
" FROM sqlite_master WHERE sql LIKE 'CREATE INDEX %' ");
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = execExecSql(db,
"SELECT 'CREATE UNIQUE INDEX vacuum_db.' || substr(sql,21) "
" FROM sqlite_master WHERE sql LIKE 'CREATE UNIQUE INDEX %'");
if( rc!=SQLITE_OK ) goto end_of_vacuum;
/* Loop through the tables in the main database. For each, do
** an "INSERT INTO vacuum_db.xxx SELECT * FROM xxx;" to copy
** the contents to the temporary database.
*/
rc = execExecSql(db,
"SELECT 'INSERT INTO vacuum_db.' || quote(name) "
"|| ' SELECT * FROM ' || quote(name) || ';'"
"FROM sqlite_master "
"WHERE type = 'table' AND name!='sqlite_sequence' "
" AND rootpage>0"
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
/* Copy over the sequence table
*/
rc = execExecSql(db,
"SELECT 'DELETE FROM vacuum_db.' || quote(name) || ';' "
"FROM vacuum_db.sqlite_master WHERE name='sqlite_sequence' "
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = execExecSql(db,
"SELECT 'INSERT INTO vacuum_db.' || quote(name) "
"|| ' SELECT * FROM ' || quote(name) || ';' "
"FROM vacuum_db.sqlite_master WHERE name=='sqlite_sequence';"
);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
/* Copy the triggers, views, and virtual tables from the main database
** over to the temporary database. None of these objects has any
** associated storage, so all we have to do is copy their entries
** from the SQLITE_MASTER table.
*/
rc = execSql(db,
"INSERT INTO vacuum_db.sqlite_master "
" SELECT type, name, tbl_name, rootpage, sql"
" FROM sqlite_master"
" WHERE type='view' OR type='trigger'"
" OR (type='table' AND rootpage=0)"
);
if( rc ) goto end_of_vacuum;
/* At this point, unless the main db was completely empty, there is now a
** transaction open on the vacuum database, but not on the main database.
** Open a btree level transaction on the main database. This allows a
** call to sqlite3BtreeCopyFile(). The main database btree level
** transaction is then committed, so the SQL level never knows it was
** opened for writing. This way, the SQL transaction used to create the
** temporary database never needs to be committed.
*/
if( rc==SQLITE_OK ){
u32 meta;
int i;
/* This array determines which meta meta values are preserved in the
** vacuum. Even entries are the meta value number and odd entries
** are an increment to apply to the meta value after the vacuum.
** The increment is used to increase the schema cookie so that other
** connections to the same database will know to reread the schema.
*/
static const unsigned char aCopy[] = {
1, 1, /* Add one to the old schema cookie */
3, 0, /* Preserve the default page cache size */
5, 0, /* Preserve the default text encoding */
6, 0, /* Preserve the user version */
};
assert( 1==sqlite3BtreeIsInTrans(pTemp) );
assert( 1==sqlite3BtreeIsInTrans(pMain) );
/* Copy Btree meta values */
for(i=0; i<ArraySize(aCopy); i+=2){
rc = sqlite3BtreeGetMeta(pMain, aCopy[i], &meta);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = sqlite3BtreeUpdateMeta(pTemp, aCopy[i], meta+aCopy[i+1]);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
}
rc = sqlite3BtreeCopyFile(pMain, pTemp);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
rc = sqlite3BtreeCommit(pTemp);
if( rc!=SQLITE_OK ) goto end_of_vacuum;
#ifndef SQLITE_OMIT_AUTOVACUUM
sqlite3BtreeSetAutoVacuum(pMain, sqlite3BtreeGetAutoVacuum(pTemp));
#endif
rc = sqlite3BtreeCommit(pMain);
}
if( rc==SQLITE_OK ){
rc = sqlite3BtreeSetPageSize(pMain, sqlite3BtreeGetPageSize(pTemp), nRes);
}
end_of_vacuum:
/* Restore the original value of db->flags */
db->flags = saved_flags;
db->nChange = saved_nChange;
db->nTotalChange = saved_nTotalChange;
/* Currently there is an SQL level transaction open on the vacuum
** database. No locks are held on any other files (since the main file
** was committed at the btree level). So it safe to end the transaction
** by manually setting the autoCommit flag to true and detaching the
** vacuum database. The vacuum_db journal file is deleted when the pager
** is closed by the DETACH.
*/
db->autoCommit = 1;
if( pDb ){
sqlite3BtreeClose(pDb->pBt);
pDb->pBt = 0;
pDb->pSchema = 0;
}
sqlite3ResetInternalSchema(db, 0);
return rc;
}
/* CHANGE 1 of 3: Add function parameter nRes */
SQLITE_PRIVATE int sqlite3RunVacuumForRekey(char **pzErrMsg, sqlite3 *db, int iDb, int nRes){
int rc = SQLITE_OK; /* Return code from service routines */
Btree *pMain; /* The database being vacuumed */
Btree *pTemp; /* The temporary database we vacuum into */
u16 saved_mDbFlags; /* Saved value of db->mDbFlags */
u32 saved_flags; /* Saved value of db->flags */
int saved_nChange; /* Saved value of db->nChange */
int saved_nTotalChange; /* Saved value of db->nTotalChange */
u8 saved_mTrace; /* Saved trace settings */
Db *pDb = 0; /* Database to detach at end of vacuum */
int isMemDb; /* True if vacuuming a :memory: database */
/* CHANGE 2 of 3: Do not define local variable nRes */
/*int nRes;*/ /* Bytes of reserved space at the end of each page */
int nDb; /* Number of attached databases */
const char *zDbMain; /* Schema name of database to vacuum */
if (!db->autoCommit) {
sqlite3SetString(pzErrMsg, db, "cannot VACUUM from within a transaction");
return SQLITE_ERROR;
}
if (db->nVdbeActive>1) {
sqlite3SetString(pzErrMsg, db, "cannot VACUUM - SQL statements in progress");
return SQLITE_ERROR;
}
/* Save the current value of the database flags so that it can be
** restored before returning. Then set the writable-schema flag, and
** disable CHECK and foreign key constraints. */
saved_flags = db->flags;
saved_mDbFlags = db->mDbFlags;
saved_nChange = db->nChange;
saved_nTotalChange = db->nTotalChange;
saved_mTrace = db->mTrace;
db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks;
db->mDbFlags |= DBFLAG_PreferBuiltin | DBFLAG_Vacuum;
db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder | SQLITE_CountRows);
db->mTrace = 0;
zDbMain = db->aDb[iDb].zDbSName;
pMain = db->aDb[iDb].pBt;
isMemDb = sqlite3PagerIsMemdb(sqlite3BtreePager(pMain));
/* Attach the temporary database as 'vacuum_db'. The synchronous pragma
** can be set to 'off' for this file, as it is not recovered if a crash
** occurs anyway. The integrity of the database is maintained by a
** (possibly synchronous) transaction opened on the main database before
** sqlite3BtreeCopyFile() is called.
**
** An optimisation would be to use a non-journaled pager.
** (Later:) I tried setting "PRAGMA vacuum_db.journal_mode=OFF" but
** that actually made the VACUUM run slower. Very little journalling
** actually occurs when doing a vacuum since the vacuum_db is initially
** empty. Only the journal header is written. Apparently it takes more
** time to parse and run the PRAGMA to turn journalling off than it does
** to write the journal header file.
*/
nDb = db->nDb;
rc = execSql(db, pzErrMsg, "ATTACH''AS vacuum_db");
if (rc != SQLITE_OK) goto end_of_vacuum;
assert((db->nDb - 1) == nDb);
pDb = &db->aDb[nDb];
assert(strcmp(pDb->zDbSName, "vacuum_db") == 0);
pTemp = pDb->pBt;
/* The call to execSql() to attach the temp database has left the file
** locked (as there was more than one active statement when the transaction
** to read the schema was concluded. Unlock it here so that this doesn't
** cause problems for the call to BtreeSetPageSize() below. */
sqlite3BtreeCommit(pTemp);
/* CHANGE 3 of 3: Do not call sqlite3BtreeGetOptimalReserve */
/* nRes = sqlite3BtreeGetOptimalReserve(pMain); */
/* A VACUUM cannot change the pagesize of an encrypted database. */
#ifdef SQLITE_HAS_CODEC
if (db->nextPagesize) {
extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*);
int nKey;
char *zKey;
sqlite3CodecGetKey(db, iDb, (void**)&zKey, &nKey);
if (nKey) db->nextPagesize = 0;
}
#endif
sqlite3BtreeSetCacheSize(pTemp, db->aDb[iDb].pSchema->cache_size);
sqlite3BtreeSetSpillSize(pTemp, sqlite3BtreeSetSpillSize(pMain, 0));
sqlite3BtreeSetPagerFlags(pTemp, PAGER_SYNCHRONOUS_OFF | PAGER_CACHESPILL);
/* Begin a transaction and take an exclusive lock on the main database
** file. This is done before the sqlite3BtreeGetPageSize(pMain) call below,
** to ensure that we do not try to change the page-size on a WAL database.
*/
rc = execSql(db, pzErrMsg, "BEGIN");
if (rc != SQLITE_OK) goto end_of_vacuum;
rc = sqlite3BtreeBeginTrans(pMain, 2);
if (rc != SQLITE_OK) goto end_of_vacuum;
/* Do not attempt to change the page size for a WAL database */
if (sqlite3PagerGetJournalMode(sqlite3BtreePager(pMain))
== PAGER_JOURNALMODE_WAL) {
db->nextPagesize = 0;
}
if (sqlite3BtreeSetPageSize(pTemp, sqlite3BtreeGetPageSize(pMain), nRes, 0)
|| (!isMemDb && sqlite3BtreeSetPageSize(pTemp, db->nextPagesize, nRes, 0))
|| NEVER(db->mallocFailed)
) {
rc = SQLITE_NOMEM_BKPT;
goto end_of_vacuum;
}
#ifndef SQLITE_OMIT_AUTOVACUUM
sqlite3BtreeSetAutoVacuum(pTemp, db->nextAutovac >= 0 ? db->nextAutovac :
sqlite3BtreeGetAutoVacuum(pMain));
#endif
/* Query the schema of the main database. Create a mirror schema
** in the temporary database.
*/
db->init.iDb = nDb; /* force new CREATE statements into vacuum_db */
rc = execSqlF(db, pzErrMsg,
"SELECT sql FROM \"%w\".sqlite_master"
" WHERE type='table'AND name<>'sqlite_sequence'"
" AND coalesce(rootpage,1)>0",
zDbMain
);
if (rc != SQLITE_OK) goto end_of_vacuum;
rc = execSqlF(db, pzErrMsg,
"SELECT sql FROM \"%w\".sqlite_master"
" WHERE type='index'",
zDbMain
);
if (rc != SQLITE_OK) goto end_of_vacuum;
db->init.iDb = 0;
/* Loop through the tables in the main database. For each, do
** an "INSERT INTO vacuum_db.xxx SELECT * FROM main.xxx;" to copy
** the contents to the temporary database.
*/
rc = execSqlF(db, pzErrMsg,
"SELECT'INSERT INTO vacuum_db.'||quote(name)"
"||' SELECT*FROM\"%w\".'||quote(name)"
"FROM vacuum_db.sqlite_master "
"WHERE type='table'AND coalesce(rootpage,1)>0",
zDbMain
);
assert((db->mDbFlags & DBFLAG_Vacuum) != 0);
db->mDbFlags &= ~DBFLAG_Vacuum;
if (rc != SQLITE_OK) goto end_of_vacuum;
/* Copy the triggers, views, and virtual tables from the main database
** over to the temporary database. None of these objects has any
** associated storage, so all we have to do is copy their entries
** from the SQLITE_MASTER table.
*/
rc = execSqlF(db, pzErrMsg,
"INSERT INTO vacuum_db.sqlite_master"
" SELECT*FROM \"%w\".sqlite_master"
" WHERE type IN('view','trigger')"
" OR(type='table'AND rootpage=0)",
zDbMain
);
if (rc) goto end_of_vacuum;
/* At this point, there is a write transaction open on both the
** vacuum database and the main database. Assuming no error occurs,
** both transactions are closed by this block - the main database
** transaction by sqlite3BtreeCopyFile() and the other by an explicit
** call to sqlite3BtreeCommit().
*/
{
u32 meta;
int i;
/* This array determines which meta meta values are preserved in the
** vacuum. Even entries are the meta value number and odd entries
** are an increment to apply to the meta value after the vacuum.
** The increment is used to increase the schema cookie so that other
** connections to the same database will know to reread the schema.
*/
static const unsigned char aCopy[] = {
BTREE_SCHEMA_VERSION, 1, /* Add one to the old schema cookie */
BTREE_DEFAULT_CACHE_SIZE, 0, /* Preserve the default page cache size */
BTREE_TEXT_ENCODING, 0, /* Preserve the text encoding */
BTREE_USER_VERSION, 0, /* Preserve the user version */
BTREE_APPLICATION_ID, 0, /* Preserve the application id */
};
assert(1 == sqlite3BtreeIsInTrans(pTemp));
assert(1 == sqlite3BtreeIsInTrans(pMain));
/* Copy Btree meta values */
for (i = 0; i<ArraySize(aCopy); i += 2) {
/* GetMeta() and UpdateMeta() cannot fail in this context because
** we already have page 1 loaded into cache and marked dirty. */
sqlite3BtreeGetMeta(pMain, aCopy[i], &meta);
rc = sqlite3BtreeUpdateMeta(pTemp, aCopy[i], meta + aCopy[i + 1]);
if (NEVER(rc != SQLITE_OK)) goto end_of_vacuum;
}
rc = sqlite3BtreeCopyFile(pMain, pTemp);
if (rc != SQLITE_OK) goto end_of_vacuum;
rc = sqlite3BtreeCommit(pTemp);
if (rc != SQLITE_OK) goto end_of_vacuum;
#ifndef SQLITE_OMIT_AUTOVACUUM
sqlite3BtreeSetAutoVacuum(pMain, sqlite3BtreeGetAutoVacuum(pTemp));
#endif
}
assert(rc == SQLITE_OK);
rc = sqlite3BtreeSetPageSize(pMain, sqlite3BtreeGetPageSize(pTemp), nRes, 1);
end_of_vacuum:
/* Restore the original value of db->flags */
db->init.iDb = 0;
db->mDbFlags = saved_mDbFlags;
db->flags = saved_flags;
db->nChange = saved_nChange;
db->nTotalChange = saved_nTotalChange;
db->mTrace = saved_mTrace;
sqlite3BtreeSetPageSize(pMain, -1, -1, 1);
/* Currently there is an SQL level transaction open on the vacuum
** database. No locks are held on any other files (since the main file
** was committed at the btree level). So it safe to end the transaction
** by manually setting the autoCommit flag to true and detaching the
** vacuum database. The vacuum_db journal file is deleted when the pager
** is closed by the DETACH.
*/
db->autoCommit = 1;
if (pDb) {
sqlite3BtreeClose(pDb->pBt);
pDb->pBt = 0;
pDb->pSchema = 0;
}
/* This both clears the schemas and reduces the size of the db->aDb[]
** array. */
sqlite3ResetAllSchemasOfConnection(db);
return rc;
}
int sqlite3CodecAttach(sqlite3* db, int nDb, const void *zKey, int nKey) {
struct Db *pDb = &db->aDb[nDb];
CODEC_TRACE(("sqlite3CodecAttach: entered nDb=%d zKey=%s, nKey=%d\n", nDb, zKey, nKey));
activate_openssl();
if(nKey && zKey && pDb->pBt) {
codec_ctx *ctx;
int rc;
Pager *pPager = pDb->pBt->pBt->pPager;
sqlite3_file *fd;
ctx = sqlite3Malloc(sizeof(codec_ctx));
if(ctx == NULL) return SQLITE_NOMEM;
memset(ctx, 0, sizeof(codec_ctx)); /* initialize all pointers and values to 0 */
ctx->pBt = pDb->pBt; /* assign pointer to database btree structure */
if((rc = cipher_ctx_init(&ctx->read_ctx)) != SQLITE_OK) return rc;
if((rc = cipher_ctx_init(&ctx->write_ctx)) != SQLITE_OK) return rc;
/* pre-allocate a page buffer of PageSize bytes. This will
be used as a persistent buffer for encryption and decryption
operations to avoid overhead of multiple memory allocations*/
ctx->buffer = sqlite3Malloc(SQLITE_DEFAULT_PAGE_SIZE);
if(ctx->buffer == NULL) return SQLITE_NOMEM;
/* allocate space for salt data. Then read the first 16 bytes
directly off the database file. This is the salt for the
key derivation function. If we get a short read allocate
a new random salt value */
ctx->kdf_salt_sz = FILE_HEADER_SZ;
ctx->kdf_salt = sqlite3Malloc(ctx->kdf_salt_sz);
if(ctx->kdf_salt == NULL) return SQLITE_NOMEM;
fd = sqlite3Pager_get_fd(pPager);
if(fd == NULL || sqlite3OsRead(fd, ctx->kdf_salt, FILE_HEADER_SZ, 0) != SQLITE_OK) {
/* if unable to read the bytes, generate random salt */
RAND_pseudo_bytes(ctx->kdf_salt, FILE_HEADER_SZ);
}
sqlite3pager_sqlite3PagerSetCodec(sqlite3BtreePager(pDb->pBt), sqlite3Codec, NULL, sqlite3FreeCodecArg, (void *) ctx);
codec_set_cipher_name(db, nDb, CIPHER, 0);
codec_set_kdf_iter(db, nDb, PBKDF2_ITER, 0);
codec_set_pass_key(db, nDb, zKey, nKey, 0);
cipher_ctx_copy(ctx->write_ctx, ctx->read_ctx);
sqlite3_mutex_enter(db->mutex);
/* Always overwrite page size and set to the default because the first page of the database
in encrypted and thus sqlite can't effectively determine the pagesize. this causes an issue in
cases where bytes 16 & 17 of the page header are a power of 2 as reported by John Lehman
Note: before forcing the page size we need to force pageSizeFixed to 0, else
sqliteBtreeSetPageSize will block the change
*/
pDb->pBt->pBt->pageSizeFixed = 0;
sqlite3BtreeSetPageSize(ctx->pBt, SQLITE_DEFAULT_PAGE_SIZE, EVP_MAX_IV_LENGTH, 0);
/* if fd is null, then this is an in-memory database and
we dont' want to overwrite the AutoVacuum settings
if not null, then set to the default */
if(fd != NULL) {
sqlite3BtreeSetAutoVacuum(ctx->pBt, SQLITE_DEFAULT_AUTOVACUUM);
}
sqlite3_mutex_leave(db->mutex);
}
return SQLITE_OK;
}
/*
** Process a pragma statement.
**
** Pragmas are of this form:
**
** PRAGMA [database.]id [= value]
**
** The identifier might also be a string. The value is a string, and
** identifier, or a number. If minusFlag is true, then the value is
** a number that was preceded by a minus sign.
**
** If the left side is "database.id" then pId1 is the database name
** and pId2 is the id. If the left side is just "id" then pId1 is the
** id and pId2 is any empty string.
*/
void sqlite3Pragma(
Parse *pParse,
Token *pId1, /* First part of [database.]id field */
Token *pId2, /* Second part of [database.]id field, or NULL */
Token *pValue, /* Token for <value>, or NULL */
int minusFlag /* True if a '-' sign preceded <value> */
){
char *zLeft = 0; /* Nul-terminated UTF-8 string <id> */
char *zRight = 0; /* Nul-terminated UTF-8 string <value>, or NULL */
const char *zDb = 0; /* The database name */
Token *pId; /* Pointer to <id> token */
int iDb; /* Database index for <database> */
sqlite3 *db = pParse->db;
Db *pDb;
Vdbe *v = pParse->pVdbe = sqlite3VdbeCreate(db);
if( v==0 ) return;
pParse->nMem = 2;
/* Interpret the [database.] part of the pragma statement. iDb is the
** index of the database this pragma is being applied to in db.aDb[]. */
iDb = sqlite3TwoPartName(pParse, pId1, pId2, &pId);
if( iDb<0 ) return;
pDb = &db->aDb[iDb];
/* If the temp database has been explicitly named as part of the
** pragma, make sure it is open.
*/
if( iDb==1 && sqlite3OpenTempDatabase(pParse) ){
return;
}
zLeft = sqlite3NameFromToken(db, pId);
if( !zLeft ) return;
if( minusFlag ){
zRight = sqlite3MPrintf(db, "-%T", pValue);
}else{
zRight = sqlite3NameFromToken(db, pValue);
}
zDb = ((pId2 && pId2->n>0)?pDb->zName:0);
if( sqlite3AuthCheck(pParse, SQLITE_PRAGMA, zLeft, zRight, zDb) ){
goto pragma_out;
}
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]default_cache_size
** PRAGMA [database.]default_cache_size=N
**
** The first form reports the current persistent setting for the
** page cache size. The value returned is the maximum number of
** pages in the page cache. The second form sets both the current
** page cache size value and the persistent page cache size value
** stored in the database file.
**
** The default cache size is stored in meta-value 2 of page 1 of the
** database file. The cache size is actually the absolute value of
** this memory location. The sign of meta-value 2 determines the
** synchronous setting. A negative value means synchronous is off
** and a positive value means synchronous is on.
*/
if( sqlite3StrICmp(zLeft,"default_cache_size")==0 ){
static const VdbeOpList getCacheSize[] = {
{ OP_ReadCookie, 0, 1, 2}, /* 0 */
{ OP_IfPos, 1, 6, 0},
{ OP_Integer, 0, 2, 0},
{ OP_Subtract, 1, 2, 1},
{ OP_IfPos, 1, 6, 0},
{ OP_Integer, 0, 1, 0}, /* 5 */
{ OP_ResultRow, 1, 1, 0},
};
int addr;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeUsesBtree(v, iDb);
if( !zRight ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cache_size", P4_STATIC);
pParse->nMem += 2;
addr = sqlite3VdbeAddOpList(v, ArraySize(getCacheSize), getCacheSize);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+5, SQLITE_DEFAULT_CACHE_SIZE);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3VdbeAddOp2(v, OP_Integer, size, 1);
sqlite3VdbeAddOp3(v, OP_ReadCookie, iDb, 2, 2);
addr = sqlite3VdbeAddOp2(v, OP_IfPos, 2, 0);
sqlite3VdbeAddOp2(v, OP_Integer, -size, 1);
sqlite3VdbeJumpHere(v, addr);
sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, 2, 1);
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA [database.]page_size
** PRAGMA [database.]page_size=N
**
** The first form reports the current setting for the
** database page size in bytes. The second form sets the
** database page size value. The value can only be set if
** the database has not yet been created.
*/
if( sqlite3StrICmp(zLeft,"page_size")==0 ){
Btree *pBt = pDb->pBt;
if( !zRight ){
int size = pBt ? sqlite3BtreeGetPageSize(pBt) : 0;
returnSingleInt(pParse, "page_size", size);
}else{
/* Malloc may fail when setting the page-size, as there is an internal
** buffer that the pager module resizes using sqlite3_realloc().
*/
db->nextPagesize = atoi(zRight);
if( SQLITE_NOMEM==sqlite3BtreeSetPageSize(pBt, db->nextPagesize, -1) ){
db->mallocFailed = 1;
}
}
}else
/*
** PRAGMA [database.]max_page_count
** PRAGMA [database.]max_page_count=N
**
** The first form reports the current setting for the
** maximum number of pages in the database file. The
** second form attempts to change this setting. Both
** forms return the current setting.
*/
if( sqlite3StrICmp(zLeft,"max_page_count")==0 ){
Btree *pBt = pDb->pBt;
int newMax = 0;
if( zRight ){
newMax = atoi(zRight);
}
if( pBt ){
newMax = sqlite3BtreeMaxPageCount(pBt, newMax);
}
returnSingleInt(pParse, "max_page_count", newMax);
}else
/*
** PRAGMA [database.]page_count
**
** Return the number of pages in the specified database.
*/
if( sqlite3StrICmp(zLeft,"page_count")==0 ){
Vdbe *v;
int iReg;
v = sqlite3GetVdbe(pParse);
if( !v || sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3CodeVerifySchema(pParse, iDb);
iReg = ++pParse->nMem;
sqlite3VdbeAddOp2(v, OP_Pagecount, iDb, iReg);
sqlite3VdbeAddOp2(v, OP_ResultRow, iReg, 1);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "page_count", P4_STATIC);
}else
/*
** PRAGMA [database.]locking_mode
** PRAGMA [database.]locking_mode = (normal|exclusive)
*/
if( sqlite3StrICmp(zLeft,"locking_mode")==0 ){
const char *zRet = "normal";
int eMode = getLockingMode(zRight);
if( pId2->n==0 && eMode==PAGER_LOCKINGMODE_QUERY ){
/* Simple "PRAGMA locking_mode;" statement. This is a query for
** the current default locking mode (which may be different to
** the locking-mode of the main database).
*/
eMode = db->dfltLockMode;
}else{
Pager *pPager;
if( pId2->n==0 ){
/* This indicates that no database name was specified as part
** of the PRAGMA command. In this case the locking-mode must be
** set on all attached databases, as well as the main db file.
**
** Also, the sqlite3.dfltLockMode variable is set so that
** any subsequently attached databases also use the specified
** locking mode.
*/
int ii;
assert(pDb==&db->aDb[0]);
for(ii=2; ii<db->nDb; ii++){
pPager = sqlite3BtreePager(db->aDb[ii].pBt);
sqlite3PagerLockingMode(pPager, eMode);
}
db->dfltLockMode = eMode;
}
pPager = sqlite3BtreePager(pDb->pBt);
eMode = sqlite3PagerLockingMode(pPager, eMode);
}
assert(eMode==PAGER_LOCKINGMODE_NORMAL||eMode==PAGER_LOCKINGMODE_EXCLUSIVE);
if( eMode==PAGER_LOCKINGMODE_EXCLUSIVE ){
zRet = "exclusive";
}
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "locking_mode", P4_STATIC);
sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, zRet, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}else
/*
** PRAGMA [database.]journal_mode
** PRAGMA [database.]journal_mode = (delete|persist|off)
*/
if( sqlite3StrICmp(zLeft,"journal_mode")==0 ){
int eMode;
static char * const azModeName[] = {"delete", "persist", "off", "truncate"};
if( zRight==0 ){
eMode = PAGER_JOURNALMODE_QUERY;
}else{
int n = strlen(zRight);
eMode = sizeof(azModeName)/sizeof(azModeName[0]) - 1;
while( eMode>=0 && sqlite3StrNICmp(zRight, azModeName[eMode], n)!=0 ){
eMode--;
}
}
if( pId2->n==0 && eMode==PAGER_JOURNALMODE_QUERY ){
/* Simple "PRAGMA journal_mode;" statement. This is a query for
** the current default journal mode (which may be different to
** the journal-mode of the main database).
*/
eMode = db->dfltJournalMode;
}else{
Pager *pPager;
if( pId2->n==0 ){
/* This indicates that no database name was specified as part
** of the PRAGMA command. In this case the journal-mode must be
** set on all attached databases, as well as the main db file.
**
** Also, the sqlite3.dfltJournalMode variable is set so that
** any subsequently attached databases also use the specified
** journal mode.
*/
int ii;
assert(pDb==&db->aDb[0]);
for(ii=1; ii<db->nDb; ii++){
if( db->aDb[ii].pBt ){
pPager = sqlite3BtreePager(db->aDb[ii].pBt);
sqlite3PagerJournalMode(pPager, eMode);
}
}
db->dfltJournalMode = eMode;
}
pPager = sqlite3BtreePager(pDb->pBt);
eMode = sqlite3PagerJournalMode(pPager, eMode);
}
assert( eMode==PAGER_JOURNALMODE_DELETE
|| eMode==PAGER_JOURNALMODE_TRUNCATE
|| eMode==PAGER_JOURNALMODE_PERSIST
|| eMode==PAGER_JOURNALMODE_OFF );
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "journal_mode", P4_STATIC);
sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0,
azModeName[eMode], P4_STATIC);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}else
/*
** PRAGMA [database.]journal_size_limit
** PRAGMA [database.]journal_size_limit=N
**
** Get or set the (boolean) value of the database 'auto-vacuum' parameter.
*/
if( sqlite3StrICmp(zLeft,"journal_size_limit")==0 ){
Pager *pPager = sqlite3BtreePager(pDb->pBt);
i64 iLimit = -2;
if( zRight ){
int iLimit32 = atoi(zRight);
if( iLimit32<-1 ){
iLimit32 = -1;
}
iLimit = iLimit32;
}
iLimit = sqlite3PagerJournalSizeLimit(pPager, iLimit);
returnSingleInt(pParse, "journal_size_limit", (int)iLimit);
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
/*
** PRAGMA [database.]auto_vacuum
** PRAGMA [database.]auto_vacuum=N
**
** Get or set the (boolean) value of the database 'auto-vacuum' parameter.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
if( sqlite3StrICmp(zLeft,"auto_vacuum")==0 ){
Btree *pBt = pDb->pBt;
if( sqlite3ReadSchema(pParse) ){
goto pragma_out;
}
if( !zRight ){
int auto_vacuum =
pBt ? sqlite3BtreeGetAutoVacuum(pBt) : SQLITE_DEFAULT_AUTOVACUUM;
returnSingleInt(pParse, "auto_vacuum", auto_vacuum);
}else{
int eAuto = getAutoVacuum(zRight);
db->nextAutovac = eAuto;
if( eAuto>=0 ){
/* Call SetAutoVacuum() to set initialize the internal auto and
** incr-vacuum flags. This is required in case this connection
** creates the database file. It is important that it is created
** as an auto-vacuum capable db.
*/
int rc = sqlite3BtreeSetAutoVacuum(pBt, eAuto);
if( rc==SQLITE_OK && (eAuto==1 || eAuto==2) ){
/* When setting the auto_vacuum mode to either "full" or
** "incremental", write the value of meta[6] in the database
** file. Before writing to meta[6], check that meta[3] indicates
** that this really is an auto-vacuum capable database.
*/
static const VdbeOpList setMeta6[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
{ OP_ReadCookie, 0, 1, 3}, /* 1 */
{ OP_If, 1, 0, 0}, /* 2 */
{ OP_Halt, SQLITE_OK, OE_Abort, 0}, /* 3 */
{ OP_Integer, 0, 1, 0}, /* 4 */
{ OP_SetCookie, 0, 6, 1}, /* 5 */
};
int iAddr;
iAddr = sqlite3VdbeAddOpList(v, ArraySize(setMeta6), setMeta6);
sqlite3VdbeChangeP1(v, iAddr, iDb);
sqlite3VdbeChangeP1(v, iAddr+1, iDb);
sqlite3VdbeChangeP2(v, iAddr+2, iAddr+4);
sqlite3VdbeChangeP1(v, iAddr+4, eAuto-1);
sqlite3VdbeChangeP1(v, iAddr+5, iDb);
sqlite3VdbeUsesBtree(v, iDb);
}
}
}
}else
#endif
/*
** PRAGMA [database.]incremental_vacuum(N)
**
** Do N steps of incremental vacuuming on a database.
*/
#ifndef SQLITE_OMIT_AUTOVACUUM
if( sqlite3StrICmp(zLeft,"incremental_vacuum")==0 ){
int iLimit, addr;
if( sqlite3ReadSchema(pParse) ){
goto pragma_out;
}
if( zRight==0 || !sqlite3GetInt32(zRight, &iLimit) || iLimit<=0 ){
iLimit = 0x7fffffff;
}
sqlite3BeginWriteOperation(pParse, 0, iDb);
sqlite3VdbeAddOp2(v, OP_Integer, iLimit, 1);
addr = sqlite3VdbeAddOp1(v, OP_IncrVacuum, iDb);
sqlite3VdbeAddOp1(v, OP_ResultRow, 1);
sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1);
sqlite3VdbeAddOp2(v, OP_IfPos, 1, addr);
sqlite3VdbeJumpHere(v, addr);
}else
#endif
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
/*
** PRAGMA [database.]cache_size
** PRAGMA [database.]cache_size=N
**
** The first form reports the current local setting for the
** page cache size. The local setting can be different from
** the persistent cache size value that is stored in the database
** file itself. The value returned is the maximum number of
** pages in the page cache. The second form sets the local
** page cache size value. It does not change the persistent
** cache size stored on the disk so the cache size will revert
** to its default value when the database is closed and reopened.
** N should be a positive integer.
*/
if( sqlite3StrICmp(zLeft,"cache_size")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "cache_size", pDb->pSchema->cache_size);
}else{
int size = atoi(zRight);
if( size<0 ) size = -size;
pDb->pSchema->cache_size = size;
sqlite3BtreeSetCacheSize(pDb->pBt, pDb->pSchema->cache_size);
}
}else
/*
** PRAGMA temp_store
** PRAGMA temp_store = "default"|"memory"|"file"
**
** Return or set the local value of the temp_store flag. Changing
** the local value does not make changes to the disk file and the default
** value will be restored the next time the database is opened.
**
** Note that it is possible for the library compile-time options to
** override this setting
*/
if( sqlite3StrICmp(zLeft, "temp_store")==0 ){
if( !zRight ){
returnSingleInt(pParse, "temp_store", db->temp_store);
}else{
changeTempStorage(pParse, zRight);
}
}else
/*
** PRAGMA temp_store_directory
** PRAGMA temp_store_directory = ""|"directory_name"
**
** Return or set the local value of the temp_store_directory flag. Changing
** the value sets a specific directory to be used for temporary files.
** Setting to a null string reverts to the default temporary directory search.
** If temporary directory is changed, then invalidateTempStorage.
**
*/
if( sqlite3StrICmp(zLeft, "temp_store_directory")==0 ){
if( !zRight ){
if( sqlite3_temp_directory ){
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME,
"temp_store_directory", P4_STATIC);
sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, sqlite3_temp_directory, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}
}else{
#ifndef SQLITE_OMIT_WSD
if( zRight[0] ){
int rc;
int res;
rc = sqlite3OsAccess(db->pVfs, zRight, SQLITE_ACCESS_READWRITE, &res);
if( rc!=SQLITE_OK || res==0 ){
sqlite3ErrorMsg(pParse, "not a writable directory");
goto pragma_out;
}
}
if( SQLITE_TEMP_STORE==0
|| (SQLITE_TEMP_STORE==1 && db->temp_store<=1)
|| (SQLITE_TEMP_STORE==2 && db->temp_store==1)
){
invalidateTempStorage(pParse);
}
sqlite3_free(sqlite3_temp_directory);
if( zRight[0] ){
sqlite3_temp_directory = sqlite3DbStrDup(0, zRight);
}else{
sqlite3_temp_directory = 0;
}
#endif /* SQLITE_OMIT_WSD */
}
}else
/*
** PRAGMA [database.]synchronous
** PRAGMA [database.]synchronous=OFF|ON|NORMAL|FULL
**
** Return or set the local value of the synchronous flag. Changing
** the local value does not make changes to the disk file and the
** default value will be restored the next time the database is
** opened.
*/
if( sqlite3StrICmp(zLeft,"synchronous")==0 ){
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
if( !zRight ){
returnSingleInt(pParse, "synchronous", pDb->safety_level-1);
}else{
if( !db->autoCommit ){
sqlite3ErrorMsg(pParse,
"Safety level may not be changed inside a transaction");
}else{
pDb->safety_level = getSafetyLevel(zRight)+1;
}
}
}else
#endif /* SQLITE_OMIT_PAGER_PRAGMAS */
#ifndef SQLITE_OMIT_FLAG_PRAGMAS
if( flagPragma(pParse, zLeft, zRight) ){
/* The flagPragma() subroutine also generates any necessary code
** there is nothing more to do here */
}else
#endif /* SQLITE_OMIT_FLAG_PRAGMAS */
#ifndef SQLITE_OMIT_SCHEMA_PRAGMAS
/*
** PRAGMA table_info(<table>)
**
** Return a single row for each column of the named table. The columns of
** the returned data set are:
**
** cid: Column id (numbered from left to right, starting at 0)
** name: Column name
** type: Column declaration type.
** notnull: True if 'NOT NULL' is part of column declaration
** dflt_value: The default value for the column, if any.
*/
if( sqlite3StrICmp(zLeft, "table_info")==0 && zRight ){
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
int i;
int nHidden = 0;
Column *pCol;
sqlite3VdbeSetNumCols(v, 6);
pParse->nMem = 6;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "cid", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "type", P4_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "notnull", P4_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "dflt_value", P4_STATIC);
sqlite3VdbeSetColName(v, 5, COLNAME_NAME, "pk", P4_STATIC);
sqlite3ViewGetColumnNames(pParse, pTab);
for(i=0, pCol=pTab->aCol; i<pTab->nCol; i++, pCol++){
const Token *pDflt;
if( IsHiddenColumn(pCol) ){
nHidden++;
continue;
}
sqlite3VdbeAddOp2(v, OP_Integer, i-nHidden, 1);
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pCol->zName, 0);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
pCol->zType ? pCol->zType : "", 0);
sqlite3VdbeAddOp2(v, OP_Integer, pCol->notNull, 4);
if( pCol->pDflt && (pDflt = &pCol->pDflt->span)->z ){
sqlite3VdbeAddOp4(v, OP_String8, 0, 5, 0, (char*)pDflt->z, pDflt->n);
}else{
sqlite3VdbeAddOp2(v, OP_Null, 0, 5);
}
sqlite3VdbeAddOp2(v, OP_Integer, pCol->isPrimKey, 6);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 6);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_info")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pIdx = sqlite3FindIndex(db, zRight, zDb);
if( pIdx ){
int i;
pTab = pIdx->pTable;
sqlite3VdbeSetNumCols(v, 3);
pParse->nMem = 3;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seqno", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "cid", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "name", P4_STATIC);
for(i=0; i<pIdx->nColumn; i++){
int cnum = pIdx->aiColumn[i];
sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
sqlite3VdbeAddOp2(v, OP_Integer, cnum, 2);
assert( pTab->nCol>cnum );
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pTab->aCol[cnum].zName, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
}
}
}else
if( sqlite3StrICmp(zLeft, "index_list")==0 && zRight ){
Index *pIdx;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pIdx = pTab->pIndex;
if( pIdx ){
int i = 0;
sqlite3VdbeSetNumCols(v, 3);
pParse->nMem = 3;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "unique", P4_STATIC);
while(pIdx){
sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pIdx->zName, 0);
sqlite3VdbeAddOp2(v, OP_Integer, pIdx->onError!=OE_None, 3);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
++i;
pIdx = pIdx->pNext;
}
}
}
}else
if( sqlite3StrICmp(zLeft, "database_list")==0 ){
int i;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 3);
pParse->nMem = 3;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "file", P4_STATIC);
for(i=0; i<db->nDb; i++){
if( db->aDb[i].pBt==0 ) continue;
assert( db->aDb[i].zName!=0 );
sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, db->aDb[i].zName, 0);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
sqlite3BtreeGetFilename(db->aDb[i].pBt), 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3);
}
}else
if( sqlite3StrICmp(zLeft, "collation_list")==0 ){
int i = 0;
HashElem *p;
sqlite3VdbeSetNumCols(v, 2);
pParse->nMem = 2;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "seq", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "name", P4_STATIC);
for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){
CollSeq *pColl = (CollSeq *)sqliteHashData(p);
sqlite3VdbeAddOp2(v, OP_Integer, i++, 1);
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, pColl->zName, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2);
}
}else
#endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */
#ifndef SQLITE_OMIT_FOREIGN_KEY
if( sqlite3StrICmp(zLeft, "foreign_key_list")==0 && zRight ){
FKey *pFK;
Table *pTab;
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pTab = sqlite3FindTable(db, zRight, zDb);
if( pTab ){
v = sqlite3GetVdbe(pParse);
pFK = pTab->pFKey;
if( pFK ){
int i = 0;
sqlite3VdbeSetNumCols(v, 5);
pParse->nMem = 5;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "id", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "seq", P4_STATIC);
sqlite3VdbeSetColName(v, 2, COLNAME_NAME, "table", P4_STATIC);
sqlite3VdbeSetColName(v, 3, COLNAME_NAME, "from", P4_STATIC);
sqlite3VdbeSetColName(v, 4, COLNAME_NAME, "to", P4_STATIC);
while(pFK){
int j;
for(j=0; j<pFK->nCol; j++){
char *zCol = pFK->aCol[j].zCol;
sqlite3VdbeAddOp2(v, OP_Integer, i, 1);
sqlite3VdbeAddOp2(v, OP_Integer, j, 2);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, pFK->zTo, 0);
sqlite3VdbeAddOp4(v, OP_String8, 0, 4, 0,
pTab->aCol[pFK->aCol[j].iFrom].zName, 0);
sqlite3VdbeAddOp4(v, zCol ? OP_String8 : OP_Null, 0, 5, 0, zCol, 0);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 5);
}
++i;
pFK = pFK->pNextFrom;
}
}
}
}else
#endif /* !defined(SQLITE_OMIT_FOREIGN_KEY) */
#ifndef NDEBUG
if( sqlite3StrICmp(zLeft, "parser_trace")==0 ){
if( zRight ){
if( getBoolean(zRight) ){
sqlite3ParserTrace(stderr, "parser: ");
}else{
sqlite3ParserTrace(0, 0);
}
}
}else
#endif
/* Reinstall the LIKE and GLOB functions. The variant of LIKE
** used will be case sensitive or not depending on the RHS.
*/
if( sqlite3StrICmp(zLeft, "case_sensitive_like")==0 ){
if( zRight ){
sqlite3RegisterLikeFunctions(db, getBoolean(zRight));
}
}else
#ifndef SQLITE_INTEGRITY_CHECK_ERROR_MAX
# define SQLITE_INTEGRITY_CHECK_ERROR_MAX 100
#endif
#ifndef SQLITE_OMIT_INTEGRITY_CHECK
/* Pragma "quick_check" is an experimental reduced version of
** integrity_check designed to detect most database corruption
** without most of the overhead of a full integrity-check.
*/
if( sqlite3StrICmp(zLeft, "integrity_check")==0
|| sqlite3StrICmp(zLeft, "quick_check")==0
){
int i, j, addr, mxErr;
/* Code that appears at the end of the integrity check. If no error
** messages have been generated, output OK. Otherwise output the
** error message
*/
static const VdbeOpList endCode[] = {
{ OP_AddImm, 1, 0, 0}, /* 0 */
{ OP_IfNeg, 1, 0, 0}, /* 1 */
{ OP_String8, 0, 3, 0}, /* 2 */
{ OP_ResultRow, 3, 1, 0},
};
int isQuick = (zLeft[0]=='q');
/* Initialize the VDBE program */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
pParse->nMem = 6;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "integrity_check", P4_STATIC);
/* Set the maximum error count */
mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX;
if( zRight ){
mxErr = atoi(zRight);
if( mxErr<=0 ){
mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX;
}
}
sqlite3VdbeAddOp2(v, OP_Integer, mxErr, 1); /* reg[1] holds errors left */
/* Do an integrity check on each database file */
for(i=0; i<db->nDb; i++){
HashElem *x;
Hash *pTbls;
int cnt = 0;
if( OMIT_TEMPDB && i==1 ) continue;
sqlite3CodeVerifySchema(pParse, i);
addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Halt if out of errors */
sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
/* Do an integrity check of the B-Tree
**
** Begin by filling registers 2, 3, ... with the root pages numbers
** for all tables and indices in the database.
*/
pTbls = &db->aDb[i].pSchema->tblHash;
for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
sqlite3VdbeAddOp2(v, OP_Integer, pTab->tnum, 2+cnt);
cnt++;
for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){
sqlite3VdbeAddOp2(v, OP_Integer, pIdx->tnum, 2+cnt);
cnt++;
}
}
if( cnt==0 ) continue;
/* Make sure sufficient number of registers have been allocated */
if( pParse->nMem < cnt+4 ){
pParse->nMem = cnt+4;
}
/* Do the b-tree integrity checks */
sqlite3VdbeAddOp3(v, OP_IntegrityCk, 2, cnt, 1);
sqlite3VdbeChangeP5(v, i);
addr = sqlite3VdbeAddOp1(v, OP_IsNull, 2);
sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0,
sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zName),
P4_DYNAMIC);
sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1);
sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2);
sqlite3VdbeAddOp2(v, OP_ResultRow, 2, 1);
sqlite3VdbeJumpHere(v, addr);
/* Make sure all the indices are constructed correctly.
*/
for(x=sqliteHashFirst(pTbls); x && !isQuick; x=sqliteHashNext(x)){
Table *pTab = sqliteHashData(x);
Index *pIdx;
int loopTop;
if( pTab->pIndex==0 ) continue;
addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Stop if out of errors */
sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
sqlite3OpenTableAndIndices(pParse, pTab, 1, OP_OpenRead);
sqlite3VdbeAddOp2(v, OP_Integer, 0, 2); /* reg(2) will count entries */
loopTop = sqlite3VdbeAddOp2(v, OP_Rewind, 1, 0);
sqlite3VdbeAddOp2(v, OP_AddImm, 2, 1); /* increment entry count */
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
int jmp2;
static const VdbeOpList idxErr[] = {
{ OP_AddImm, 1, -1, 0},
{ OP_String8, 0, 3, 0}, /* 1 */
{ OP_Rowid, 1, 4, 0},
{ OP_String8, 0, 5, 0}, /* 3 */
{ OP_String8, 0, 6, 0}, /* 4 */
{ OP_Concat, 4, 3, 3},
{ OP_Concat, 5, 3, 3},
{ OP_Concat, 6, 3, 3},
{ OP_ResultRow, 3, 1, 0},
{ OP_IfPos, 1, 0, 0}, /* 9 */
{ OP_Halt, 0, 0, 0},
};
sqlite3GenerateIndexKey(pParse, pIdx, 1, 3, 1);
jmp2 = sqlite3VdbeAddOp3(v, OP_Found, j+2, 0, 3);
addr = sqlite3VdbeAddOpList(v, ArraySize(idxErr), idxErr);
sqlite3VdbeChangeP4(v, addr+1, "rowid ", P4_STATIC);
sqlite3VdbeChangeP4(v, addr+3, " missing from index ", P4_STATIC);
sqlite3VdbeChangeP4(v, addr+4, pIdx->zName, P4_STATIC);
sqlite3VdbeJumpHere(v, addr+9);
sqlite3VdbeJumpHere(v, jmp2);
}
sqlite3VdbeAddOp2(v, OP_Next, 1, loopTop+1);
sqlite3VdbeJumpHere(v, loopTop);
for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){
static const VdbeOpList cntIdx[] = {
{ OP_Integer, 0, 3, 0},
{ OP_Rewind, 0, 0, 0}, /* 1 */
{ OP_AddImm, 3, 1, 0},
{ OP_Next, 0, 0, 0}, /* 3 */
{ OP_Eq, 2, 0, 3}, /* 4 */
{ OP_AddImm, 1, -1, 0},
{ OP_String8, 0, 2, 0}, /* 6 */
{ OP_String8, 0, 3, 0}, /* 7 */
{ OP_Concat, 3, 2, 2},
{ OP_ResultRow, 2, 1, 0},
};
if( pIdx->tnum==0 ) continue;
addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1);
sqlite3VdbeAddOp2(v, OP_Halt, 0, 0);
sqlite3VdbeJumpHere(v, addr);
addr = sqlite3VdbeAddOpList(v, ArraySize(cntIdx), cntIdx);
sqlite3VdbeChangeP1(v, addr+1, j+2);
sqlite3VdbeChangeP2(v, addr+1, addr+4);
sqlite3VdbeChangeP1(v, addr+3, j+2);
sqlite3VdbeChangeP2(v, addr+3, addr+2);
sqlite3VdbeJumpHere(v, addr+4);
sqlite3VdbeChangeP4(v, addr+6,
"wrong # of entries in index ", P4_STATIC);
sqlite3VdbeChangeP4(v, addr+7, pIdx->zName, P4_STATIC);
}
}
}
addr = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode);
sqlite3VdbeChangeP2(v, addr, -mxErr);
sqlite3VdbeJumpHere(v, addr+1);
sqlite3VdbeChangeP4(v, addr+2, "ok", P4_STATIC);
}else
#endif /* SQLITE_OMIT_INTEGRITY_CHECK */
#ifndef SQLITE_OMIT_UTF16
/*
** PRAGMA encoding
** PRAGMA encoding = "utf-8"|"utf-16"|"utf-16le"|"utf-16be"
**
** In its first form, this pragma returns the encoding of the main
** database. If the database is not initialized, it is initialized now.
**
** The second form of this pragma is a no-op if the main database file
** has not already been initialized. In this case it sets the default
** encoding that will be used for the main database file if a new file
** is created. If an existing main database file is opened, then the
** default text encoding for the existing database is used.
**
** In all cases new databases created using the ATTACH command are
** created to use the same default text encoding as the main database. If
** the main database has not been initialized and/or created when ATTACH
** is executed, this is done before the ATTACH operation.
**
** In the second form this pragma sets the text encoding to be used in
** new database files created using this database handle. It is only
** useful if invoked immediately after the main database i
*/
if( sqlite3StrICmp(zLeft, "encoding")==0 ){
static const struct EncName {
char *zName;
u8 enc;
} encnames[] = {
{ "UTF-8", SQLITE_UTF8 },
{ "UTF8", SQLITE_UTF8 },
{ "UTF-16le", SQLITE_UTF16LE },
{ "UTF16le", SQLITE_UTF16LE },
{ "UTF-16be", SQLITE_UTF16BE },
{ "UTF16be", SQLITE_UTF16BE },
{ "UTF-16", 0 }, /* SQLITE_UTF16NATIVE */
{ "UTF16", 0 }, /* SQLITE_UTF16NATIVE */
{ 0, 0 }
};
const struct EncName *pEnc;
if( !zRight ){ /* "PRAGMA encoding" */
if( sqlite3ReadSchema(pParse) ) goto pragma_out;
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "encoding", P4_STATIC);
sqlite3VdbeAddOp2(v, OP_String8, 0, 1);
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( pEnc->enc==ENC(pParse->db) ){
sqlite3VdbeChangeP4(v, -1, pEnc->zName, P4_STATIC);
break;
}
}
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 1);
}else{ /* "PRAGMA encoding = XXX" */
/* Only change the value of sqlite.enc if the database handle is not
** initialized. If the main database exists, the new sqlite.enc value
** will be overwritten when the schema is next loaded. If it does not
** already exists, it will be created to use the new encoding value.
*/
if(
!(DbHasProperty(db, 0, DB_SchemaLoaded)) ||
DbHasProperty(db, 0, DB_Empty)
){
for(pEnc=&encnames[0]; pEnc->zName; pEnc++){
if( 0==sqlite3StrICmp(zRight, pEnc->zName) ){
ENC(pParse->db) = pEnc->enc ? pEnc->enc : SQLITE_UTF16NATIVE;
break;
}
}
if( !pEnc->zName ){
sqlite3ErrorMsg(pParse, "unsupported encoding: %s", zRight);
}
}
}
}else
#endif /* SQLITE_OMIT_UTF16 */
#ifndef SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
/*
** PRAGMA [database.]schema_version
** PRAGMA [database.]schema_version = <integer>
**
** PRAGMA [database.]user_version
** PRAGMA [database.]user_version = <integer>
**
** The pragma's schema_version and user_version are used to set or get
** the value of the schema-version and user-version, respectively. Both
** the schema-version and the user-version are 32-bit signed integers
** stored in the database header.
**
** The schema-cookie is usually only manipulated internally by SQLite. It
** is incremented by SQLite whenever the database schema is modified (by
** creating or dropping a table or index). The schema version is used by
** SQLite each time a query is executed to ensure that the internal cache
** of the schema used when compiling the SQL query matches the schema of
** the database against which the compiled query is actually executed.
** Subverting this mechanism by using "PRAGMA schema_version" to modify
** the schema-version is potentially dangerous and may lead to program
** crashes or database corruption. Use with caution!
**
** The user-version is not used internally by SQLite. It may be used by
** applications for any purpose.
*/
if( sqlite3StrICmp(zLeft, "schema_version")==0
|| sqlite3StrICmp(zLeft, "user_version")==0
|| sqlite3StrICmp(zLeft, "freelist_count")==0
){
int iCookie; /* Cookie index. 0 for schema-cookie, 6 for user-cookie. */
sqlite3VdbeUsesBtree(v, iDb);
switch( zLeft[0] ){
case 's': case 'S':
iCookie = 0;
break;
case 'f': case 'F':
iCookie = 1;
iDb = (-1*(iDb+1));
assert(iDb<=0);
break;
default:
iCookie = 5;
break;
}
if( zRight && iDb>=0 ){
/* Write the specified cookie value */
static const VdbeOpList setCookie[] = {
{ OP_Transaction, 0, 1, 0}, /* 0 */
{ OP_Integer, 0, 1, 0}, /* 1 */
{ OP_SetCookie, 0, 0, 1}, /* 2 */
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(setCookie), setCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP1(v, addr+1, atoi(zRight));
sqlite3VdbeChangeP1(v, addr+2, iDb);
sqlite3VdbeChangeP2(v, addr+2, iCookie);
}else{
/* Read the specified cookie value */
static const VdbeOpList readCookie[] = {
{ OP_ReadCookie, 0, 1, 0}, /* 0 */
{ OP_ResultRow, 1, 1, 0}
};
int addr = sqlite3VdbeAddOpList(v, ArraySize(readCookie), readCookie);
sqlite3VdbeChangeP1(v, addr, iDb);
sqlite3VdbeChangeP3(v, addr, iCookie);
sqlite3VdbeSetNumCols(v, 1);
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, zLeft, P4_TRANSIENT);
}
}else
#endif /* SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS */
#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
/*
** Report the current state of file logs for all databases
*/
if( sqlite3StrICmp(zLeft, "lock_status")==0 ){
static const char *const azLockName[] = {
"unlocked", "shared", "reserved", "pending", "exclusive"
};
int i;
Vdbe *v = sqlite3GetVdbe(pParse);
sqlite3VdbeSetNumCols(v, 2);
pParse->nMem = 2;
sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "database", P4_STATIC);
sqlite3VdbeSetColName(v, 1, COLNAME_NAME, "status", P4_STATIC);
for(i=0; i<db->nDb; i++){
Btree *pBt;
Pager *pPager;
const char *zState = "unknown";
int j;
if( db->aDb[i].zName==0 ) continue;
sqlite3VdbeAddOp4(v, OP_String8, 0, 1, 0, db->aDb[i].zName, P4_STATIC);
pBt = db->aDb[i].pBt;
if( pBt==0 || (pPager = sqlite3BtreePager(pBt))==0 ){
zState = "closed";
}else if( sqlite3_file_control(db, i ? db->aDb[i].zName : 0,
SQLITE_FCNTL_LOCKSTATE, &j)==SQLITE_OK ){
zState = azLockName[j];
}
sqlite3VdbeAddOp4(v, OP_String8, 0, 2, 0, zState, P4_STATIC);
sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2);
}
}else
#endif
#ifdef SQLITE_SSE
/*
** Check to see if the sqlite_statements table exists. Create it
** if it does not.
*/
if( sqlite3StrICmp(zLeft, "create_sqlite_statement_table")==0 ){
extern int sqlite3CreateStatementsTable(Parse*);
sqlite3CreateStatementsTable(pParse);
}else
#endif
#if SQLITE_HAS_CODEC
if( sqlite3StrICmp(zLeft, "key")==0 ){
sqlite3_key(db, zRight, strlen(zRight));
}else
#endif
#if SQLITE_HAS_CODEC || defined(SQLITE_ENABLE_CEROD)
if( sqlite3StrICmp(zLeft, "activate_extensions")==0 ){
#if SQLITE_HAS_CODEC
if( sqlite3StrNICmp(zRight, "see-", 4)==0 ){
extern void sqlite3_activate_see(const char*);
sqlite3_activate_see(&zRight[4]);
}
#endif
#ifdef SQLITE_ENABLE_CEROD
if( sqlite3StrNICmp(zRight, "cerod-", 6)==0 ){
extern void sqlite3_activate_cerod(const char*);
sqlite3_activate_cerod(&zRight[6]);
}
#endif
}
#endif
{}
if( v ){
/* Code an OP_Expire at the end of each PRAGMA program to cause
** the VDBE implementing the pragma to expire. Most (all?) pragmas
** are only valid for a single execution.
*/
sqlite3VdbeAddOp2(v, OP_Expire, 1, 0);
/*
** Reset the safety level, in case the fullfsync flag or synchronous
** setting changed.
*/
#ifndef SQLITE_OMIT_PAGER_PRAGMAS
if( db->autoCommit ){
sqlite3BtreeSetSafetyLevel(pDb->pBt, pDb->safety_level,
(db->flags&SQLITE_FullFSync)!=0);
}
#endif
}
pragma_out:
sqlite3DbFree(db, zLeft);
sqlite3DbFree(db, zRight);
}