예제 #1
0
/* Returns a SECStatus: SECSuccess or SECFailure, NOT SECWouldBlock. 
 * 
 * Currently, the list of functions called through ss->handshake is:
 * 
 * In sslsocks.c:
 *  SocksGatherRecord
 *  SocksHandleReply	
 *  SocksStartGather
 *
 * In sslcon.c:
 *  ssl_GatherRecord1stHandshake
 *  ssl2_HandleClientSessionKeyMessage
 *  ssl2_HandleMessage
 *  ssl2_HandleVerifyMessage
 *  ssl2_BeginClientHandshake
 *  ssl2_BeginServerHandshake
 *  ssl2_HandleClientHelloMessage
 *  ssl2_HandleServerHelloMessage
 * 
 * The ss->handshake function returns SECWouldBlock under these conditions:
 * 1.	ssl_GatherRecord1stHandshake called ssl2_GatherData which read in 
 *	the beginning of an SSL v3 hello message and returned SECWouldBlock 
 *	to switch to SSL v3 handshake processing.
 *
 * 2.	ssl2_HandleClientHelloMessage discovered version 3.0 in the incoming
 *	v2 client hello msg, and called ssl3_HandleV2ClientHello which 
 *	returned SECWouldBlock.
 *
 * 3.   SECWouldBlock was returned by one of the callback functions, via
 *	one of these paths:
 * -	ssl2_HandleMessage() -> ssl2_HandleRequestCertificate() ->
 *	ss->getClientAuthData()
 *
 * -	ssl2_HandleServerHelloMessage() -> ss->handleBadCert()
 *
 * -	ssl_GatherRecord1stHandshake() -> ssl3_GatherCompleteHandshake() -> 
 *	ssl3_HandleRecord() -> ssl3_HandleHandshake() -> 
 *	ssl3_HandleHandshakeMessage() -> ssl3_HandleCertificate() -> 
 *	ss->handleBadCert()
 *
 * -	ssl_GatherRecord1stHandshake() -> ssl3_GatherCompleteHandshake() -> 
 *	ssl3_HandleRecord() -> ssl3_HandleHandshake() -> 
 *	ssl3_HandleHandshakeMessage() -> ssl3_HandleCertificateRequest() -> 
 *	ss->getClientAuthData()
 *
 * Called from: SSL_ForceHandshake	(below), 
 *              ssl_SecureRecv 		(below) and
 *              ssl_SecureSend		(below)
 *	  from: WaitForResponse 	in sslsocks.c
 *	        ssl_SocksRecv   	in sslsocks.c
 *              ssl_SocksSend   	in sslsocks.c
 *
 * Caller must hold the (write) handshakeLock.
 */
int 
ssl_Do1stHandshake(sslSocket *ss)
{
    int rv        = SECSuccess;
    int loopCount = 0;

    do {
	PORT_Assert(ss->opt.noLocks ||  ssl_Have1stHandshakeLock(ss) );
	PORT_Assert(ss->opt.noLocks || !ssl_HaveRecvBufLock(ss));
	PORT_Assert(ss->opt.noLocks || !ssl_HaveXmitBufLock(ss));
	PORT_Assert(ss->opt.noLocks || !ssl_HaveSSL3HandshakeLock(ss));

	if (ss->handshake == 0) {
	    /* Previous handshake finished. Switch to next one */
	    ss->handshake = ss->nextHandshake;
	    ss->nextHandshake = 0;
	}
	if (ss->handshake == 0) {
	    /* Previous handshake finished. Switch to security handshake */
	    ss->handshake = ss->securityHandshake;
	    ss->securityHandshake = 0;
	}
	if (ss->handshake == 0) {
	    ssl_GetRecvBufLock(ss);
	    ss->gs.recordLen = 0;
	    ssl_ReleaseRecvBufLock(ss);

	    SSL_TRC(3, ("%d: SSL[%d]: handshake is completed",
			SSL_GETPID(), ss->fd));
            /* call handshake callback for ssl v2 */
	    /* for v3 this is done in ssl3_HandleFinished() */
	    if ((ss->handshakeCallback != NULL) && /* has callback */
		(!ss->firstHsDone) &&              /* only first time */
		(ss->version < SSL_LIBRARY_VERSION_3_0)) {  /* not ssl3 */
		ss->firstHsDone     = PR_TRUE;
		(ss->handshakeCallback)(ss->fd, ss->handshakeCallbackData);
	    }
	    ss->firstHsDone         = PR_TRUE;
	    ss->gs.writeOffset = 0;
	    ss->gs.readOffset  = 0;
	    break;
	}
	rv = (*ss->handshake)(ss);
	++loopCount;
    /* This code must continue to loop on SECWouldBlock, 
     * or any positive value.	See XXX_1 comments.
     */
    } while (rv != SECFailure);  	/* was (rv >= 0); XXX_1 */

    PORT_Assert(ss->opt.noLocks || !ssl_HaveRecvBufLock(ss));
    PORT_Assert(ss->opt.noLocks || !ssl_HaveXmitBufLock(ss));
    PORT_Assert(ss->opt.noLocks || !ssl_HaveSSL3HandshakeLock(ss));

    if (rv == SECWouldBlock) {
	PORT_SetError(PR_WOULD_BLOCK_ERROR);
	rv = SECFailure;
    }
    return rv;
}
예제 #2
0
/* Returns a SECStatus: SECSuccess or SECFailure, NOT SECWouldBlock. 
 * 
 * Currently, the list of functions called through ss->handshake is:
 * 
 * In sslsocks.c:
 *  SocksGatherRecord
 *  SocksHandleReply	
 *  SocksStartGather
 *
 * In sslcon.c:
 *  ssl_GatherRecord1stHandshake
 *  ssl2_HandleClientSessionKeyMessage
 *  ssl2_HandleMessage
 *  ssl2_HandleVerifyMessage
 *  ssl2_BeginClientHandshake
 *  ssl2_BeginServerHandshake
 *  ssl2_HandleClientHelloMessage
 *  ssl2_HandleServerHelloMessage
 * 
 * The ss->handshake function returns SECWouldBlock under these conditions:
 * 1.	ssl_GatherRecord1stHandshake called ssl2_GatherData which read in 
 *	the beginning of an SSL v3 hello message and returned SECWouldBlock 
 *	to switch to SSL v3 handshake processing.
 *
 * 2.	ssl2_HandleClientHelloMessage discovered version 3.0 in the incoming
 *	v2 client hello msg, and called ssl3_HandleV2ClientHello which 
 *	returned SECWouldBlock.
 *
 * 3.   SECWouldBlock was returned by one of the callback functions, via
 *	one of these paths:
 * -	ssl2_HandleMessage() -> ssl2_HandleRequestCertificate() ->
 *	ss->getClientAuthData()
 *
 * -	ssl2_HandleServerHelloMessage() -> ss->handleBadCert()
 *
 * -	ssl_GatherRecord1stHandshake() -> ssl3_GatherCompleteHandshake() -> 
 *	ssl3_HandleRecord() -> ssl3_HandleHandshake() -> 
 *	ssl3_HandleHandshakeMessage() -> ssl3_HandleCertificate() -> 
 *	ss->handleBadCert()
 *
 * -	ssl_GatherRecord1stHandshake() -> ssl3_GatherCompleteHandshake() -> 
 *	ssl3_HandleRecord() -> ssl3_HandleHandshake() -> 
 *	ssl3_HandleHandshakeMessage() -> ssl3_HandleCertificateRequest() -> 
 *	ss->getClientAuthData()
 *
 * Called from: SSL_ForceHandshake	(below), 
 *              ssl_SecureRecv 		(below) and
 *              ssl_SecureSend		(below)
 *	  from: WaitForResponse 	in sslsocks.c
 *	        ssl_SocksRecv   	in sslsocks.c
 *              ssl_SocksSend   	in sslsocks.c
 *
 * Caller must hold the (write) handshakeLock.
 */
int 
ssl_Do1stHandshake(sslSocket *ss)
{
    int rv        = SECSuccess;
    int loopCount = 0;

    do {
	PORT_Assert(ss->opt.noLocks ||  ssl_Have1stHandshakeLock(ss) );
	PORT_Assert(ss->opt.noLocks || !ssl_HaveRecvBufLock(ss));
	PORT_Assert(ss->opt.noLocks || !ssl_HaveXmitBufLock(ss));
	PORT_Assert(ss->opt.noLocks || !ssl_HaveSSL3HandshakeLock(ss));

	if (ss->handshake == 0) {
	    /* Previous handshake finished. Switch to next one */
	    ss->handshake = ss->nextHandshake;
	    ss->nextHandshake = 0;
	}
	if (ss->handshake == 0) {
	    /* Previous handshake finished. Switch to security handshake */
	    ss->handshake = ss->securityHandshake;
	    ss->securityHandshake = 0;
	}
	if (ss->handshake == 0) {
	    /* for v3 this is done in ssl3_FinishHandshake */
	    if (!ss->firstHsDone && ss->version < SSL_LIBRARY_VERSION_3_0) {
		ssl_GetRecvBufLock(ss);
		ss->gs.recordLen = 0;
		ssl_FinishHandshake(ss);
		ssl_ReleaseRecvBufLock(ss);
	    }
	    break;
	}
	rv = (*ss->handshake)(ss);
	++loopCount;
    /* This code must continue to loop on SECWouldBlock, 
     * or any positive value.	See XXX_1 comments.
     */
    } while (rv != SECFailure);  	/* was (rv >= 0); XXX_1 */

    PORT_Assert(ss->opt.noLocks || !ssl_HaveRecvBufLock(ss));
    PORT_Assert(ss->opt.noLocks || !ssl_HaveXmitBufLock(ss));
    PORT_Assert(ss->opt.noLocks || !ssl_HaveSSL3HandshakeLock(ss));

    if (rv == SECWouldBlock) {
	PORT_SetError(PR_WOULD_BLOCK_ERROR);
	rv = SECFailure;
    }
    return rv;
}
예제 #3
0
/* Gather in a record and when complete, Handle that record.
 * Repeat this until the handshake is complete, 
 * or until application data is available.
 *
 * Returns  1 when the handshake is completed without error, or 
 *                 application data is available.
 * Returns  0 if ssl3_GatherData hits EOF.
 * Returns -1 on read error, or PR_WOULD_BLOCK_ERROR, or handleRecord error.
 * Returns -2 on SECWouldBlock return from ssl3_HandleRecord.
 *
 * Called from ssl_GatherRecord1stHandshake       in sslcon.c, 
 *    and from SSL_ForceHandshake in sslsecur.c
 *    and from ssl3_GatherAppDataRecord below (<- DoRecv in sslsecur.c).
 *
 * Caller must hold the recv buf lock.
 */
int
ssl3_GatherCompleteHandshake(sslSocket *ss, int flags)
{
    SSL3Ciphertext cText;
    int            rv;

    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );
    do {
	/* bring in the next sslv3 record. */
	rv = ssl3_GatherData(ss, &ss->gs, flags);
	if (rv <= 0) {
	    return rv;
	}
	
	/* decipher it, and handle it if it's a handshake. 
	 * If it's application data, ss->gs.buf will not be empty upon return. 
	 */
	cText.type    = (SSL3ContentType)ss->gs.hdr[0];
	cText.version = (ss->gs.hdr[1] << 8) | ss->gs.hdr[2];
	cText.buf     = &ss->gs.inbuf;
	rv = ssl3_HandleRecord(ss, &cText, &ss->gs.buf);
	if (rv < 0) {
	    return ss->recvdCloseNotify ? 0 : rv;
	}
    } while (ss->ssl3.hs.ws != idle_handshake && ss->gs.buf.len == 0);

    ss->gs.readOffset = 0;
    ss->gs.writeOffset = ss->gs.buf.len;
    return 1;
}
예제 #4
0
파일: ssl3ecc.c 프로젝트: wugh7125/sdk
/*
** Called from ssl3_HandleClientKeyExchange()
*/
SECStatus
ssl3_HandleECDHClientKeyExchange(sslSocket *ss, SSL3Opaque *b,
				     PRUint32 length,
                                     SECKEYPublicKey *srvrPubKey,
                                     SECKEYPrivateKey *srvrPrivKey)
{
    PK11SymKey *      pms;
    SECStatus         rv;
    SECKEYPublicKey   clntPubKey;
    CK_MECHANISM_TYPE	target;
    PRBool isTLS, isTLS12;

    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );
    PORT_Assert( ss->opt.noLocks || ssl_HaveSSL3HandshakeLock(ss) );

    clntPubKey.keyType = ecKey;
    clntPubKey.u.ec.DEREncodedParams.len = 
	srvrPubKey->u.ec.DEREncodedParams.len;
    clntPubKey.u.ec.DEREncodedParams.data = 
	srvrPubKey->u.ec.DEREncodedParams.data;

    rv = ssl3_ConsumeHandshakeVariable(ss, &clntPubKey.u.ec.publicValue, 
	                               1, &b, &length);
    if (rv != SECSuccess) {
	SEND_ALERT
	return SECFailure;	/* XXX Who sets the error code?? */
    }
예제 #5
0
int 
ssl_Do1stHandshake(sslSocket *ss)
{
    int rv        = SECSuccess;
    int loopCount = 0;

    do {
	PORT_Assert(ss->opt.noLocks ||  ssl_Have1stHandshakeLock(ss) );
	PORT_Assert(ss->opt.noLocks || !ssl_HaveRecvBufLock(ss));
	PORT_Assert(ss->opt.noLocks || !ssl_HaveXmitBufLock(ss));
	PORT_Assert(ss->opt.noLocks || !ssl_HaveSSL3HandshakeLock(ss));

	if (ss->handshake == 0) {
	    
	    ss->handshake = ss->nextHandshake;
	    ss->nextHandshake = 0;
	}
	if (ss->handshake == 0) {
	    
	    ss->handshake = ss->securityHandshake;
	    ss->securityHandshake = 0;
	}
	if (ss->handshake == 0) {
	    
	    if (!ss->firstHsDone && ss->version < SSL_LIBRARY_VERSION_3_0) {
		ssl_GetRecvBufLock(ss);
		ss->gs.recordLen = 0;
		ssl_FinishHandshake(ss);
		ssl_ReleaseRecvBufLock(ss);
	    }
	    break;
	}
	rv = (*ss->handshake)(ss);
	++loopCount;
    } while (rv != SECFailure);  	

    PORT_Assert(ss->opt.noLocks || !ssl_HaveRecvBufLock(ss));
    PORT_Assert(ss->opt.noLocks || !ssl_HaveXmitBufLock(ss));
    PORT_Assert(ss->opt.noLocks || !ssl_HaveSSL3HandshakeLock(ss));

    if (rv == SECWouldBlock) {
	PORT_SetError(PR_WOULD_BLOCK_ERROR);
	rv = SECFailure;
    }
    return rv;
}
예제 #6
0
/* Repeatedly gather in a record and when complete, Handle that record.
 * Repeat this until some application data is received.
 *
 * Returns  1 when application data is available.
 * Returns  0 if ssl3_GatherData hits EOF.
 * Returns -1 on read error, or PR_WOULD_BLOCK_ERROR, or handleRecord error.
 * Returns -2 on SECWouldBlock return from ssl3_HandleRecord.
 *
 * Called from DoRecv in sslsecur.c
 * Caller must hold the recv buf lock.
 */
int
ssl3_GatherAppDataRecord(sslSocket *ss, int flags)
{
    int            rv;

    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );
    do {
	rv = ssl3_GatherCompleteHandshake(ss, flags);
    } while (rv > 0 && ss->gs.buf.len == 0);

    return rv;
}
예제 #7
0
파일: sslsecur.c 프로젝트: MekliCZ/positron
/* Returns a SECStatus: SECSuccess or SECFailure, NOT SECWouldBlock.
 *
 * Currently, the list of functions called through ss->handshake is:
 *
 * In sslsocks.c:
 *  SocksGatherRecord
 *  SocksHandleReply
 *  SocksStartGather
 *
 * In sslcon.c:
 *  ssl_GatherRecord1stHandshake
 *  ssl_BeginClientHandshake
 *  ssl_BeginServerHandshake
 *
 * The ss->handshake function returns SECWouldBlock if it was returned by
 *  one of the callback functions, via one of these paths:
 *
 * -    ssl_GatherRecord1stHandshake() -> ssl3_GatherCompleteHandshake() ->
 *  ssl3_HandleRecord() -> ssl3_HandleHandshake() ->
 *  ssl3_HandleHandshakeMessage() -> ssl3_HandleCertificate() ->
 *  ss->handleBadCert()
 *
 * -    ssl_GatherRecord1stHandshake() -> ssl3_GatherCompleteHandshake() ->
 *  ssl3_HandleRecord() -> ssl3_HandleHandshake() ->
 *  ssl3_HandleHandshakeMessage() -> ssl3_HandleCertificateRequest() ->
 *  ss->getClientAuthData()
 *
 * Called from: SSL_ForceHandshake  (below),
 *              ssl_SecureRecv      (below) and
 *              ssl_SecureSend      (below)
 *    from: WaitForResponse     in sslsocks.c
 *          ssl_SocksRecv       in sslsocks.c
 *              ssl_SocksSend       in sslsocks.c
 *
 * Caller must hold the (write) handshakeLock.
 */
int
ssl_Do1stHandshake(sslSocket *ss)
{
    int rv = SECSuccess;

    while (ss->handshake && rv == SECSuccess) {
        PORT_Assert(ss->opt.noLocks || ssl_Have1stHandshakeLock(ss));
        PORT_Assert(ss->opt.noLocks || !ssl_HaveRecvBufLock(ss));
        PORT_Assert(ss->opt.noLocks || !ssl_HaveXmitBufLock(ss));
        PORT_Assert(ss->opt.noLocks || !ssl_HaveSSL3HandshakeLock(ss));

        rv = (*ss->handshake)(ss);
    };

    PORT_Assert(ss->opt.noLocks || !ssl_HaveRecvBufLock(ss));
    PORT_Assert(ss->opt.noLocks || !ssl_HaveXmitBufLock(ss));
    PORT_Assert(ss->opt.noLocks || !ssl_HaveSSL3HandshakeLock(ss));

    if (rv == SECWouldBlock) {
        PORT_SetError(PR_WOULD_BLOCK_ERROR);
        rv = SECFailure;
    }
    return rv;
}
예제 #8
0
/*
** Take an encoded key share and make a public key out of it.
*/
SECStatus
ssl_ImportECDHKeyShare(sslSocket *ss, SECKEYPublicKey *peerKey,
                       SSL3Opaque *b, PRUint32 length,
                       const sslNamedGroupDef *ecGroup)
{
    SECStatus rv;
    SECItem ecPoint = { siBuffer, NULL, 0 };

    PORT_Assert(ss->opt.noLocks || ssl_HaveRecvBufLock(ss));
    PORT_Assert(ss->opt.noLocks || ssl_HaveSSL3HandshakeLock(ss));

    if (!length) {
        PORT_SetError(SSL_ERROR_RX_MALFORMED_ECDHE_KEY_SHARE);
        return SECFailure;
    }

    /* Fail if the ec point uses compressed representation */
    if (b[0] != EC_POINT_FORM_UNCOMPRESSED &&
        ecGroup->name != ssl_grp_ec_curve25519) {
        PORT_SetError(SEC_ERROR_UNSUPPORTED_EC_POINT_FORM);
        return SECFailure;
    }

    peerKey->keyType = ecKey;
    /* Set up the encoded params */
    rv = ssl_NamedGroup2ECParams(peerKey->arena, ecGroup,
                                 &peerKey->u.ec.DEREncodedParams);
    if (rv != SECSuccess) {
        ssl_MapLowLevelError(SSL_ERROR_RX_MALFORMED_ECDHE_KEY_SHARE);
        return SECFailure;
    }
    if (ecGroup->name == ssl_grp_ec_curve25519) {
        peerKey->u.ec.encoding = ECPoint_XOnly;
    } else {
        peerKey->u.ec.encoding = ECPoint_Uncompressed;
    }

    /* copy publicValue in peerKey */
    ecPoint.data = b;
    ecPoint.len = length;

    rv = SECITEM_CopyItem(peerKey->arena, &peerKey->u.ec.publicValue, &ecPoint);
    if (rv != SECSuccess) {
        return SECFailure;
    }

    return SECSuccess;
}
예제 #9
0
void
ssl_FinishHandshake(sslSocket *ss)
{
    PORT_Assert( ss->opt.noLocks || ssl_Have1stHandshakeLock(ss) );
    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );

    SSL_TRC(3, ("%d: SSL[%d]: handshake is completed", SSL_GETPID(), ss->fd));

    ss->firstHsDone = PR_TRUE;
    ss->enoughFirstHsDone = PR_TRUE;
    ss->gs.writeOffset = 0;
    ss->gs.readOffset  = 0;

    if (ss->handshakeCallback) {
	(ss->handshakeCallback)(ss->fd, ss->handshakeCallbackData);
    }
}
예제 #10
0
void
ssl_FinishHandshake(sslSocket *ss)
{
    PORT_Assert( ss->opt.noLocks || ssl_Have1stHandshakeLock(ss) );
    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );

    SSL_TRC(3, ("%d: SSL[%d]: handshake is completed", SSL_GETPID(), ss->fd));

    ss->firstHsDone = PR_TRUE;
    ss->enoughFirstHsDone = PR_TRUE;
    ss->gs.writeOffset = 0;
    ss->gs.readOffset  = 0;

    if (ss->handshakeCallback) {
      PORT_Assert(ss->version < SSL_LIBRARY_VERSION_3_0 ||
                  (ss->ssl3.hs.preliminaryInfo & ssl_preinfo_all) ==
                  ssl_preinfo_all);
	(ss->handshakeCallback)(ss->fd, ss->handshakeCallbackData);
    }
}
예제 #11
0
/* Gather in a record and when complete, Handle that record.
 * Repeat this until the handshake is complete, 
 * or until application data is available.
 *
 * Returns  1 when the handshake is completed without error, or 
 *                 application data is available.
 * Returns  0 if ssl3_GatherData hits EOF.
 * Returns -1 on read error, or PR_WOULD_BLOCK_ERROR, or handleRecord error.
 * Returns -2 on SECWouldBlock return from ssl3_HandleRecord.
 *
 * Called from ssl_GatherRecord1stHandshake       in sslcon.c, 
 *    and from SSL_ForceHandshake in sslsecur.c
 *    and from ssl3_GatherAppDataRecord below (<- DoRecv in sslsecur.c).
 *
 * Caller must hold the recv buf lock.
 */
int
ssl3_GatherCompleteHandshake(sslSocket *ss, int flags)
{
    SSL3Ciphertext cText;
    int            rv;
    PRBool         canFalseStart = PR_FALSE;

    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );
    do {
	/* Without this, we may end up wrongly reporting
	 * SSL_ERROR_RX_UNEXPECTED_* errors if we receive any records from the
	 * peer while we are waiting to be restarted.
	 */
	ssl_GetSSL3HandshakeLock(ss);
	rv = ss->ssl3.hs.restartTarget == NULL ? SECSuccess : SECFailure;
	ssl_ReleaseSSL3HandshakeLock(ss);
	if (rv != SECSuccess) {
	    PORT_SetError(PR_WOULD_BLOCK_ERROR);
	    return (int) SECFailure;
	}

	/* Treat an empty msgState like a NULL msgState. (Most of the time
	 * when ssl3_HandleHandshake returns SECWouldBlock, it leaves
	 * behind a non-NULL but zero-length msgState).
	 * Test: async_cert_restart_server_sends_hello_request_first_in_separate_record
	 */
	if (ss->ssl3.hs.msgState.buf != NULL) {
	    if (ss->ssl3.hs.msgState.len == 0) {
		ss->ssl3.hs.msgState.buf = NULL;
	    }
	}

	if (ss->ssl3.hs.msgState.buf != NULL) {
	    /* ssl3_HandleHandshake previously returned SECWouldBlock and the
	     * as-yet-unprocessed plaintext of that previous handshake record.
	     * We need to process it now before we overwrite it with the next
	     * handshake record.
	     */
	    rv = ssl3_HandleRecord(ss, NULL, &ss->gs.buf);
	} else {
	    /* bring in the next sslv3 record. */
	    rv = ssl3_GatherData(ss, &ss->gs, flags);
	    if (rv <= 0) {
		return rv;
	    }

	    /* decipher it, and handle it if it's a handshake.
	     * If it's application data, ss->gs.buf will not be empty upon return.
	     * If it's a change cipher spec, alert, or handshake message,
	     * ss->gs.buf.len will be 0 when ssl3_HandleRecord returns SECSuccess.
	     */
	    cText.type    = (SSL3ContentType)ss->gs.hdr[0];
	    cText.version = (ss->gs.hdr[1] << 8) | ss->gs.hdr[2];
	    cText.buf     = &ss->gs.inbuf;
	    rv = ssl3_HandleRecord(ss, &cText, &ss->gs.buf);
	}
	if (rv < 0) {
	    return ss->recvdCloseNotify ? 0 : rv;
	}

	/* If we kicked off a false start in ssl3_HandleServerHelloDone, break
	 * out of this loop early without finishing the handshake.
	 */
	if (ss->opt.enableFalseStart) {
	    ssl_GetSSL3HandshakeLock(ss);
	    canFalseStart = (ss->ssl3.hs.ws == wait_change_cipher ||
			     ss->ssl3.hs.ws == wait_new_session_ticket) &&
		            ssl3_CanFalseStart(ss);
	    ssl_ReleaseSSL3HandshakeLock(ss);
	}
    } while (ss->ssl3.hs.ws != idle_handshake &&
             !canFalseStart &&
             ss->gs.buf.len == 0);

    ss->gs.readOffset = 0;
    ss->gs.writeOffset = ss->gs.buf.len;
    return 1;
}
예제 #12
0
/*
** Called from ssl3_HandleClientKeyExchange()
*/
SECStatus
ssl3_HandleECDHClientKeyExchange(sslSocket *ss, SSL3Opaque *b,
                                 PRUint32 length,
                                 sslKeyPair *serverKeyPair)
{
    PK11SymKey *pms;
    SECStatus rv;
    SECKEYPublicKey clntPubKey;
    CK_MECHANISM_TYPE target;
    PRBool isTLS, isTLS12;
    int errCode = SSL_ERROR_RX_MALFORMED_CLIENT_KEY_EXCH;

    PORT_Assert(ss->opt.noLocks || ssl_HaveRecvBufLock(ss));
    PORT_Assert(ss->opt.noLocks || ssl_HaveSSL3HandshakeLock(ss));

    clntPubKey.keyType = ecKey;
    clntPubKey.u.ec.DEREncodedParams.len =
        serverKeyPair->pubKey->u.ec.DEREncodedParams.len;
    clntPubKey.u.ec.DEREncodedParams.data =
        serverKeyPair->pubKey->u.ec.DEREncodedParams.data;

    rv = ssl3_ConsumeHandshakeVariable(ss, &clntPubKey.u.ec.publicValue,
                                       1, &b, &length);
    if (rv != SECSuccess) {
        PORT_SetError(errCode);
        return SECFailure;
    }

    /* we have to catch the case when the client's public key has length 0. */
    if (!clntPubKey.u.ec.publicValue.len) {
        (void)SSL3_SendAlert(ss, alert_fatal, illegal_parameter);
        PORT_SetError(errCode);
        return SECFailure;
    }

    isTLS = (PRBool)(ss->ssl3.prSpec->version > SSL_LIBRARY_VERSION_3_0);
    isTLS12 = (PRBool)(ss->ssl3.prSpec->version >= SSL_LIBRARY_VERSION_TLS_1_2);

    if (isTLS12) {
        target = CKM_TLS12_MASTER_KEY_DERIVE_DH;
    } else if (isTLS) {
        target = CKM_TLS_MASTER_KEY_DERIVE_DH;
    } else {
        target = CKM_SSL3_MASTER_KEY_DERIVE_DH;
    }

    /*  Determine the PMS */
    pms = PK11_PubDeriveWithKDF(serverKeyPair->privKey, &clntPubKey,
                                PR_FALSE, NULL, NULL,
                                CKM_ECDH1_DERIVE, target, CKA_DERIVE, 0,
                                CKD_NULL, NULL, NULL);

    if (pms == NULL) {
        /* last gasp.  */
        errCode = ssl_MapLowLevelError(SSL_ERROR_CLIENT_KEY_EXCHANGE_FAILURE);
        PORT_SetError(errCode);
        return SECFailure;
    }

    rv = ssl3_InitPendingCipherSpec(ss, pms);
    PK11_FreeSymKey(pms);
    if (rv != SECSuccess) {
        /* error code set by ssl3_InitPendingCipherSpec */
        return SECFailure;
    }
    return SECSuccess;
}
예제 #13
0
/*
 * Attempt to read in an entire SSL3 record.
 * Blocks here for blocking sockets, otherwise returns -1 with
 *  PR_WOULD_BLOCK_ERROR when socket would block.
 *
 * returns  1 if received a complete SSL3 record.
 * returns  0 if recv returns EOF
 * returns -1 if recv returns < 0
 *  (The error value may have already been set to PR_WOULD_BLOCK_ERROR)
 *
 * Caller must hold the recv buf lock.
 *
 * The Gather state machine has 3 states:  GS_INIT, GS_HEADER, GS_DATA.
 * GS_HEADER: waiting for the 5-byte SSL3 record header to come in.
 * GS_DATA:   waiting for the body of the SSL3 record   to come in.
 *
 * This loop returns when either
 *      (a) an error or EOF occurs,
 *  (b) PR_WOULD_BLOCK_ERROR,
 *  (c) data (entire SSL3 record) has been received.
 */
static int
ssl3_GatherData(sslSocket *ss, sslGather *gs, int flags)
{
    unsigned char *bp;
    unsigned char *lbp;
    int nb;
    int err;
    int rv = 1;

    PORT_Assert(ss->opt.noLocks || ssl_HaveRecvBufLock(ss));
    if (gs->state == GS_INIT) {
        gs->state = GS_HEADER;
        gs->remainder = 5;
        gs->offset = 0;
        gs->writeOffset = 0;
        gs->readOffset = 0;
        gs->inbuf.len = 0;
    }

    lbp = gs->inbuf.buf;
    for (;;) {
        SSL_TRC(30, ("%d: SSL3[%d]: gather state %d (need %d more)",
                     SSL_GETPID(), ss->fd, gs->state, gs->remainder));
        bp = ((gs->state != GS_HEADER) ? lbp : gs->hdr) + gs->offset;
        nb = ssl_DefRecv(ss, bp, gs->remainder, flags);

        if (nb > 0) {
            PRINT_BUF(60, (ss, "raw gather data:", bp, nb));
        } else if (nb == 0) {
            /* EOF */
            SSL_TRC(30, ("%d: SSL3[%d]: EOF", SSL_GETPID(), ss->fd));
            rv = 0;
            break;
        } else /* if (nb < 0) */ {
            SSL_DBG(("%d: SSL3[%d]: recv error %d", SSL_GETPID(), ss->fd,
                     PR_GetError()));
            rv = SECFailure;
            break;
        }

        PORT_Assert((unsigned int)nb <= gs->remainder);
        if ((unsigned int)nb > gs->remainder) {
            /* ssl_DefRecv is misbehaving!  this error is fatal to SSL. */
            gs->state = GS_INIT; /* so we don't crash next time */
            rv = SECFailure;
            break;
        }

        gs->offset += nb;
        gs->remainder -= nb;
        if (gs->state == GS_DATA)
            gs->inbuf.len += nb;

        /* if there's more to go, read some more. */
        if (gs->remainder > 0) {
            continue;
        }

        /* have received entire record header, or entire record. */
        switch (gs->state) {
            case GS_HEADER:
              /*
              ** Have received SSL3 record header in gs->hdr.
              ** Now extract the length of the following encrypted data,
              ** and then read in the rest of the SSL3 record into gs->inbuf.
              */
                gs->remainder = (gs->hdr[3] << 8) | gs->hdr[4];

                /* This is the max fragment length for an encrypted fragment
                ** plus the size of the record header.
                */
                if (gs->remainder > (MAX_FRAGMENT_LENGTH + 2048 + 5)) {
                    SSL3_SendAlert(ss, alert_fatal, unexpected_message);
                    gs->state = GS_INIT;
                    PORT_SetError(SSL_ERROR_RX_RECORD_TOO_LONG);
                    return SECFailure;
                }

                gs->state = GS_DATA;
                gs->offset = 0;
                gs->inbuf.len = 0;

                if (gs->remainder > gs->inbuf.space) {
                    err = sslBuffer_Grow(&gs->inbuf, gs->remainder);
                    if (err) { /* realloc has set error code to no mem. */
                        return err;
                    }
                    lbp = gs->inbuf.buf;
                }
                break; /* End this case.  Continue around the loop. */

            case GS_DATA:
                /*
                ** SSL3 record has been completely received.
                */
                gs->state = GS_INIT;
                return 1;
        }
    }

    return rv;
}
예제 #14
0
/* Gather in a record and when complete, Handle that record.
 * Repeat this until the handshake is complete,
 * or until application data is available.
 *
 * Returns  1 when the handshake is completed without error, or
 *                 application data is available.
 * Returns  0 if ssl3_GatherData hits EOF.
 * Returns -1 on read error, or PR_WOULD_BLOCK_ERROR, or handleRecord error.
 * Returns -2 on SECWouldBlock return from ssl3_HandleRecord.
 *
 * Called from ssl_GatherRecord1stHandshake       in sslcon.c,
 *    and from SSL_ForceHandshake in sslsecur.c
 *    and from ssl3_GatherAppDataRecord below (<- DoRecv in sslsecur.c).
 *
 * Caller must hold the recv buf lock.
 */
int
ssl3_GatherCompleteHandshake(sslSocket *ss, int flags)
{
    SSL3Ciphertext cText;
    int rv;
    PRBool keepGoing = PR_TRUE;

    SSL_TRC(30, ("ssl3_GatherCompleteHandshake"));

    /* ssl3_HandleRecord may end up eventually calling ssl_FinishHandshake,
     * which requires the 1stHandshakeLock, which must be acquired before the
     * RecvBufLock.
     */
    PORT_Assert(ss->opt.noLocks || ssl_Have1stHandshakeLock(ss));
    PORT_Assert(ss->opt.noLocks || ssl_HaveRecvBufLock(ss));

    do {
        PRBool handleRecordNow = PR_FALSE;

        ssl_GetSSL3HandshakeLock(ss);

        /* Without this, we may end up wrongly reporting
         * SSL_ERROR_RX_UNEXPECTED_* errors if we receive any records from the
         * peer while we are waiting to be restarted.
         */
        if (ss->ssl3.hs.restartTarget) {
            ssl_ReleaseSSL3HandshakeLock(ss);
            PORT_SetError(PR_WOULD_BLOCK_ERROR);
            return (int)SECFailure;
        }

        /* Treat an empty msgState like a NULL msgState. (Most of the time
         * when ssl3_HandleHandshake returns SECWouldBlock, it leaves
         * behind a non-NULL but zero-length msgState).
         * Test: async_cert_restart_server_sends_hello_request_first_in_separate_record
         */
        if (ss->ssl3.hs.msgState.buf) {
            if (ss->ssl3.hs.msgState.len == 0) {
                ss->ssl3.hs.msgState.buf = NULL;
            } else {
                handleRecordNow = PR_TRUE;
            }
        }

        ssl_ReleaseSSL3HandshakeLock(ss);

        if (handleRecordNow) {
            /* ssl3_HandleHandshake previously returned SECWouldBlock and the
             * as-yet-unprocessed plaintext of that previous handshake record.
             * We need to process it now before we overwrite it with the next
             * handshake record.
             */
            rv = ssl3_HandleRecord(ss, NULL, &ss->gs.buf);
        } else {
            /* bring in the next sslv3 record. */
            if (ss->recvdCloseNotify) {
                /* RFC 5246 Section 7.2.1:
                 *   Any data received after a closure alert is ignored.
                 */
                return 0;
            }
            if (!IS_DTLS(ss)) {
                rv = ssl3_GatherData(ss, &ss->gs, flags);
            } else {
                rv = dtls_GatherData(ss, &ss->gs, flags);

                /* If we got a would block error, that means that no data was
                 * available, so we check the timer to see if it's time to
                 * retransmit */
                if (rv == SECFailure &&
                    (PORT_GetError() == PR_WOULD_BLOCK_ERROR)) {
                    ssl_GetSSL3HandshakeLock(ss);
                    dtls_CheckTimer(ss);
                    ssl_ReleaseSSL3HandshakeLock(ss);
                    /* Restore the error in case something succeeded */
                    PORT_SetError(PR_WOULD_BLOCK_ERROR);
                }
            }

            if (rv <= 0) {
                return rv;
            }

            /* decipher it, and handle it if it's a handshake.
             * If it's application data, ss->gs.buf will not be empty upon return.
             * If it's a change cipher spec, alert, or handshake message,
             * ss->gs.buf.len will be 0 when ssl3_HandleRecord returns SECSuccess.
             */
            cText.type = (SSL3ContentType)ss->gs.hdr[0];
            cText.version = (ss->gs.hdr[1] << 8) | ss->gs.hdr[2];

            if (IS_DTLS(ss)) {
                int i;

                cText.version = dtls_DTLSVersionToTLSVersion(cText.version);
                /* DTLS sequence number */
                cText.seq_num.high = 0;
                cText.seq_num.low = 0;
                for (i = 0; i < 4; i++) {
                    cText.seq_num.high <<= 8;
                    cText.seq_num.low <<= 8;
                    cText.seq_num.high |= ss->gs.hdr[3 + i];
                    cText.seq_num.low |= ss->gs.hdr[7 + i];
                }
            }

            cText.buf = &ss->gs.inbuf;
            rv = ssl3_HandleRecord(ss, &cText, &ss->gs.buf);
        }
        if (rv < 0) {
            return ss->recvdCloseNotify ? 0 : rv;
        }
        if (ss->gs.buf.len > 0) {
            /* We have application data to return to the application. This
             * prioritizes returning application data to the application over
             * completing any renegotiation handshake we may be doing.
             */
            PORT_Assert(ss->firstHsDone);
            PORT_Assert(cText.type == content_application_data);
            break;
        }

        PORT_Assert(keepGoing);
        ssl_GetSSL3HandshakeLock(ss);
        if (ss->ssl3.hs.ws == idle_handshake) {
            /* We are done with the current handshake so stop trying to
             * handshake. Note that it would be safe to test ss->firstHsDone
             * instead of ss->ssl3.hs.ws. By testing ss->ssl3.hs.ws instead,
             * we prioritize completing a renegotiation handshake over sending
             * application data.
             */
            PORT_Assert(ss->firstHsDone);
            PORT_Assert(!ss->ssl3.hs.canFalseStart);
            keepGoing = PR_FALSE;
        } else if (ss->ssl3.hs.canFalseStart) {
            /* Prioritize sending application data over trying to complete
             * the handshake if we're false starting.
             *
             * If we were to do this check at the beginning of the loop instead
             * of here, then this function would become be a no-op after
             * receiving the ServerHelloDone in the false start case, and we
             * would never complete the handshake.
             */
            PORT_Assert(!ss->firstHsDone);

            if (ssl3_WaitingForServerSecondRound(ss)) {
                keepGoing = PR_FALSE;
            } else {
                ss->ssl3.hs.canFalseStart = PR_FALSE;
            }
        }
        ssl_ReleaseSSL3HandshakeLock(ss);
    } while (keepGoing);

    ss->gs.readOffset = 0;
    ss->gs.writeOffset = ss->gs.buf.len;
    return 1;
}
예제 #15
0
/*
 * Read in an entire DTLS record.
 *
 * Blocks here for blocking sockets, otherwise returns -1 with
 *  PR_WOULD_BLOCK_ERROR when socket would block.
 *
 * This is simpler than SSL because we are reading on a datagram socket
 * and datagrams must contain >=1 complete records.
 *
 * returns  1 if received a complete DTLS record.
 * returns  0 if recv returns EOF
 * returns -1 if recv returns < 0
 *  (The error value may have already been set to PR_WOULD_BLOCK_ERROR)
 *
 * Caller must hold the recv buf lock.
 *
 * This loop returns when either
 *      (a) an error or EOF occurs,
 *  (b) PR_WOULD_BLOCK_ERROR,
 *  (c) data (entire DTLS record) has been received.
 */
static int
dtls_GatherData(sslSocket *ss, sslGather *gs, int flags)
{
    int nb;
    int err;
    int rv = 1;

    SSL_TRC(30, ("dtls_GatherData"));

    PORT_Assert(ss->opt.noLocks || ssl_HaveRecvBufLock(ss));

    gs->state = GS_HEADER;
    gs->offset = 0;

    if (gs->dtlsPacketOffset == gs->dtlsPacket.len) { /* No data left */
        gs->dtlsPacketOffset = 0;
        gs->dtlsPacket.len = 0;

        /* Resize to the maximum possible size so we can fit a full datagram */
        /* This is the max fragment length for an encrypted fragment
        ** plus the size of the record header.
        ** This magic constant is copied from ssl3_GatherData, with 5 changed
        ** to 13 (the size of the record header).
        */
        if (gs->dtlsPacket.space < MAX_FRAGMENT_LENGTH + 2048 + 13) {
            err = sslBuffer_Grow(&gs->dtlsPacket,
                                 MAX_FRAGMENT_LENGTH + 2048 + 13);
            if (err) { /* realloc has set error code to no mem. */
                return err;
            }
        }

        /* recv() needs to read a full datagram at a time */
        nb = ssl_DefRecv(ss, gs->dtlsPacket.buf, gs->dtlsPacket.space, flags);

        if (nb > 0) {
            PRINT_BUF(60, (ss, "raw gather data:", gs->dtlsPacket.buf, nb));
        } else if (nb == 0) {
            /* EOF */
            SSL_TRC(30, ("%d: SSL3[%d]: EOF", SSL_GETPID(), ss->fd));
            rv = 0;
            return rv;
        } else /* if (nb < 0) */ {
            SSL_DBG(("%d: SSL3[%d]: recv error %d", SSL_GETPID(), ss->fd,
                     PR_GetError()));
            rv = SECFailure;
            return rv;
        }

        gs->dtlsPacket.len = nb;
    }

    /* At this point we should have >=1 complete records lined up in
     * dtlsPacket. Read off the header.
     */
    if ((gs->dtlsPacket.len - gs->dtlsPacketOffset) < 13) {
        SSL_DBG(("%d: SSL3[%d]: rest of DTLS packet "
                 "too short to contain header",
                 SSL_GETPID(), ss->fd));
        PR_SetError(PR_WOULD_BLOCK_ERROR, 0);
        gs->dtlsPacketOffset = 0;
        gs->dtlsPacket.len = 0;
        rv = SECFailure;
        return rv;
    }
    memcpy(gs->hdr, gs->dtlsPacket.buf + gs->dtlsPacketOffset, 13);
    gs->dtlsPacketOffset += 13;

    /* Have received SSL3 record header in gs->hdr. */
    gs->remainder = (gs->hdr[11] << 8) | gs->hdr[12];

    if ((gs->dtlsPacket.len - gs->dtlsPacketOffset) < gs->remainder) {
        SSL_DBG(("%d: SSL3[%d]: rest of DTLS packet too short "
                 "to contain rest of body",
                 SSL_GETPID(), ss->fd));
        PR_SetError(PR_WOULD_BLOCK_ERROR, 0);
        gs->dtlsPacketOffset = 0;
        gs->dtlsPacket.len = 0;
        rv = SECFailure;
        return rv;
    }

    /* OK, we have at least one complete packet, copy into inbuf */
    if (gs->remainder > gs->inbuf.space) {
        err = sslBuffer_Grow(&gs->inbuf, gs->remainder);
        if (err) { /* realloc has set error code to no mem. */
            return err;
        }
    }

    memcpy(gs->inbuf.buf, gs->dtlsPacket.buf + gs->dtlsPacketOffset,
           gs->remainder);
    gs->inbuf.len = gs->remainder;
    gs->offset = gs->remainder;
    gs->dtlsPacketOffset += gs->remainder;
    gs->state = GS_INIT;

    return 1;
}
예제 #16
0
int
ssl3_GatherCompleteHandshake(sslSocket *ss, int flags)
{
    SSL3Ciphertext cText;
    int            rv;
    PRBool         keepGoing = PR_TRUE;

    SSL_TRC(30, ("ssl3_GatherCompleteHandshake"));

    PORT_Assert( ss->opt.noLocks || ssl_Have1stHandshakeLock(ss) );
    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );

    do {
        PRBool handleRecordNow = PR_FALSE;

        ssl_GetSSL3HandshakeLock(ss);

        if (ss->ssl3.hs.restartTarget) {
            ssl_ReleaseSSL3HandshakeLock(ss);
            PORT_SetError(PR_WOULD_BLOCK_ERROR);
            return (int) SECFailure;
        }

        if (ss->ssl3.hs.msgState.buf) {
            if (ss->ssl3.hs.msgState.len == 0) {
                ss->ssl3.hs.msgState.buf = NULL;
            } else {
                handleRecordNow = PR_TRUE;
            }
        }

        ssl_ReleaseSSL3HandshakeLock(ss);

        if (handleRecordNow) {
            rv = ssl3_HandleRecord(ss, NULL, &ss->gs.buf);
        } else {

            if (!IS_DTLS(ss)) {
                rv = ssl3_GatherData(ss, &ss->gs, flags);
            } else {
                rv = dtls_GatherData(ss, &ss->gs, flags);

                if (rv == SECFailure &&
                        (PORT_GetError() == PR_WOULD_BLOCK_ERROR)) {
                    ssl_GetSSL3HandshakeLock(ss);
                    dtls_CheckTimer(ss);
                    ssl_ReleaseSSL3HandshakeLock(ss);

                    PORT_SetError(PR_WOULD_BLOCK_ERROR);
                }
            }

            if (rv <= 0) {
                return rv;
            }

            cText.type    = (SSL3ContentType)ss->gs.hdr[0];
            cText.version = (ss->gs.hdr[1] << 8) | ss->gs.hdr[2];

            if (IS_DTLS(ss)) {
                int i;

                cText.version = dtls_DTLSVersionToTLSVersion(cText.version);

                cText.seq_num.high = 0;
                cText.seq_num.low = 0;
                for (i = 0; i < 4; i++) {
                    cText.seq_num.high <<= 8;
                    cText.seq_num.low <<= 8;
                    cText.seq_num.high |= ss->gs.hdr[3 + i];
                    cText.seq_num.low |= ss->gs.hdr[7 + i];
                }
            }

            cText.buf     = &ss->gs.inbuf;
            rv = ssl3_HandleRecord(ss, &cText, &ss->gs.buf);

            if (rv == (int) SECSuccess && ss->gs.buf.len > 0) {
                PORT_Assert(ss->firstHsDone);
                PORT_Assert(cText.type == content_application_data);
                break;
            }
        }
        if (rv < 0) {
            return ss->recvdCloseNotify ? 0 : rv;
        }

        PORT_Assert(keepGoing);
        ssl_GetSSL3HandshakeLock(ss);
        if (ss->ssl3.hs.ws == idle_handshake) {
            PORT_Assert(ss->firstHsDone);
            PORT_Assert(!ss->ssl3.hs.canFalseStart);
            keepGoing = PR_FALSE;
        } else if (ss->ssl3.hs.canFalseStart) {
            PORT_Assert(!ss->firstHsDone);

            if (ssl3_WaitingForStartOfServerSecondRound(ss)) {
                keepGoing = PR_FALSE;
            } else {
                ss->ssl3.hs.canFalseStart = PR_FALSE;
            }
        }
        ssl_ReleaseSSL3HandshakeLock(ss);
    } while (keepGoing);

    ss->gs.readOffset = 0;
    ss->gs.writeOffset = ss->gs.buf.len;
    return 1;
}
예제 #17
0
static int
ssl3_GatherData(sslSocket *ss, sslGather *gs, int flags)
{
    unsigned char *bp;
    unsigned char *lbp;
    int            nb;
    int            err;
    int            rv		= 1;

    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );
    if (gs->state == GS_INIT) {
        gs->state       = GS_HEADER;
        gs->remainder   = 5;
        gs->offset      = 0;
        gs->writeOffset = 0;
        gs->readOffset  = 0;
        gs->inbuf.len   = 0;
    }

    lbp = gs->inbuf.buf;
    for(;;) {
        SSL_TRC(30, ("%d: SSL3[%d]: gather state %d (need %d more)",
                     SSL_GETPID(), ss->fd, gs->state, gs->remainder));
        bp = ((gs->state != GS_HEADER) ? lbp : gs->hdr) + gs->offset;
        nb = ssl_DefRecv(ss, bp, gs->remainder, flags);

        if (nb > 0) {
            PRINT_BUF(60, (ss, "raw gather data:", bp, nb));
        } else if (nb == 0) {

            SSL_TRC(30, ("%d: SSL3[%d]: EOF", SSL_GETPID(), ss->fd));
            rv = 0;
            break;
        } else  {
            SSL_DBG(("%d: SSL3[%d]: recv error %d", SSL_GETPID(), ss->fd,
                     PR_GetError()));
            rv = SECFailure;
            break;
        }

        PORT_Assert( nb <= gs->remainder );
        if (nb > gs->remainder) {

            gs->state = GS_INIT;
            rv = SECFailure;
            break;
        }

        gs->offset    += nb;
        gs->remainder -= nb;
        if (gs->state == GS_DATA)
            gs->inbuf.len += nb;


        if (gs->remainder > 0) {
            continue;
        }


        switch (gs->state) {
        case GS_HEADER:
            gs->remainder = (gs->hdr[3] << 8) | gs->hdr[4];

            if(gs->remainder > (MAX_FRAGMENT_LENGTH + 2048 + 5)) {
                SSL3_SendAlert(ss, alert_fatal, unexpected_message);
                gs->state = GS_INIT;
                PORT_SetError(SSL_ERROR_RX_RECORD_TOO_LONG);
                return SECFailure;
            }

            gs->state     = GS_DATA;
            gs->offset    = 0;
            gs->inbuf.len = 0;

            if (gs->remainder > gs->inbuf.space) {
                err = sslBuffer_Grow(&gs->inbuf, gs->remainder);
                if (err) {
                    return err;
                }
                lbp = gs->inbuf.buf;
            }
            break;


        case GS_DATA:
            gs->state = GS_INIT;
            return 1;
        }
    }

    return rv;
}
예제 #18
0
static int
dtls_GatherData(sslSocket *ss, sslGather *gs, int flags)
{
    int            nb;
    int            err;
    int            rv		= 1;

    SSL_TRC(30, ("dtls_GatherData"));

    PORT_Assert( ss->opt.noLocks || ssl_HaveRecvBufLock(ss) );

    gs->state = GS_HEADER;
    gs->offset = 0;

    if (gs->dtlsPacketOffset == gs->dtlsPacket.len) {
        gs->dtlsPacketOffset = 0;
        gs->dtlsPacket.len = 0;


        if (gs->dtlsPacket.space < MAX_FRAGMENT_LENGTH + 2048 + 13) {
            err = sslBuffer_Grow(&gs->dtlsPacket,
                                 MAX_FRAGMENT_LENGTH + 2048 + 13);
            if (err) {
                return err;
            }
        }


        nb = ssl_DefRecv(ss, gs->dtlsPacket.buf, gs->dtlsPacket.space, flags);

        if (nb > 0) {
            PRINT_BUF(60, (ss, "raw gather data:", gs->dtlsPacket.buf, nb));
        } else if (nb == 0) {

            SSL_TRC(30, ("%d: SSL3[%d]: EOF", SSL_GETPID(), ss->fd));
            rv = 0;
            return rv;
        } else  {
            SSL_DBG(("%d: SSL3[%d]: recv error %d", SSL_GETPID(), ss->fd,
                     PR_GetError()));
            rv = SECFailure;
            return rv;
        }

        gs->dtlsPacket.len = nb;
    }

    if ((gs->dtlsPacket.len - gs->dtlsPacketOffset) < 13) {
        SSL_DBG(("%d: SSL3[%d]: rest of DTLS packet "
                 "too short to contain header", SSL_GETPID(), ss->fd));
        PR_SetError(PR_WOULD_BLOCK_ERROR, 0);
        gs->dtlsPacketOffset = 0;
        gs->dtlsPacket.len = 0;
        rv = SECFailure;
        return rv;
    }
    memcpy(gs->hdr, gs->dtlsPacket.buf + gs->dtlsPacketOffset, 13);
    gs->dtlsPacketOffset += 13;


    gs->remainder = (gs->hdr[11] << 8) | gs->hdr[12];

    if ((gs->dtlsPacket.len - gs->dtlsPacketOffset) < gs->remainder) {
        SSL_DBG(("%d: SSL3[%d]: rest of DTLS packet too short "
                 "to contain rest of body", SSL_GETPID(), ss->fd));
        PR_SetError(PR_WOULD_BLOCK_ERROR, 0);
        gs->dtlsPacketOffset = 0;
        gs->dtlsPacket.len = 0;
        rv = SECFailure;
        return rv;
    }


    if (gs->remainder > gs->inbuf.space) {
        err = sslBuffer_Grow(&gs->inbuf, gs->remainder);
        if (err) {
            return err;
        }
    }

    memcpy(gs->inbuf.buf, gs->dtlsPacket.buf + gs->dtlsPacketOffset,
           gs->remainder);
    gs->inbuf.len = gs->remainder;
    gs->offset = gs->remainder;
    gs->dtlsPacketOffset += gs->remainder;
    gs->state = GS_INIT;

    return 1;
}