static ssize_t uart_switch_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t size)
{
if (sec_get_param_value)
sec_get_param_value(__SWITCH_SEL, &switch_sel);
if (strncmp(buf, "PDA", 3) == 0 || strncmp(buf, "pda", 3) == 0) {
Ap_Cp_Switch_Config(AP_UART_MODE);
uart_switching_value_update(SWITCH_PDA);
uart_current_owner = 1;
switch_sel |= UART_SEL_MASK;
printk("[UART Switch] Path : PDA\n");
}
if (strncmp(buf, "MODEM", 5) == 0 || strncmp(buf, "modem", 5) == 0) {
Ap_Cp_Switch_Config(CP_UART_MODE);
uart_switching_value_update(SWITCH_MODEM);
uart_current_owner = 0;
switch_sel &= ~UART_SEL_MASK;
printk("[UART Switch] Path : MODEM\n");
}
switching_value_update();
if (sec_set_param_value)
sec_set_param_value(__SWITCH_SEL, &switch_sel);
return size;
}
static ssize_t usb_sel_store(
struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
{
DEBUG_FSA9480("[FSA9480]%s\n ", __func__);
if (sec_get_param_value)
sec_get_param_value(__SWITCH_SEL, &switch_sel);
if(strncmp(buf, "PDA", 3) == 0 || strncmp(buf, "pda", 3) == 0)
{
usb_switch_mode(SWITCH_PDA);
usb_switching_value_update(SWITCH_PDA);
switch_sel |= USB_SEL_MASK;
}
if(strncmp(buf, "MODEM", 5) == 0 || strncmp(buf, "modem", 5) == 0)
{
usb_switch_mode(SWITCH_MODEM);
usb_switching_value_update(SWITCH_MODEM);
switch_sel &= ~USB_SEL_MASK;
}
switching_value_update();
if (sec_set_param_value)
sec_set_param_value(__SWITCH_SEL, &switch_sel);
microusb_uart_status(0);
return size;
}
static void connectivity_switching_init(struct work_struct *ignored)
{
int usb_sel, uart_sel, samsung_kies_sel, ums_sel, mtp_sel, vtp_sel, askon_sel;
int lpm_mode_check = charging_mode_get();
switch_sel = 0;
dmsg("\n");
if (sec_get_param_value) {
sec_get_param_value(__SWITCH_SEL, &switch_sel);
cancel_delayed_work(&switch_init_work);
}
else {
schedule_delayed_work(&switch_init_work, msecs_to_jiffies(100));
return;
}
if(BOOTUP) {
BOOTUP = 0;
otg_phy_init(); //USB Power on after boot up.
}
usb_sel = switch_sel & (int)(USB_SEL_MASK);
uart_sel = (switch_sel & (int)(UART_SEL_MASK)) >> 1;
samsung_kies_sel = (switch_sel & (int)(USB_SAMSUNG_KIES_MASK)) >> 2;
ums_sel = (switch_sel & (int)(USB_UMS_MASK)) >> 3;
mtp_sel = (switch_sel & (int)(USB_MTP_MASK)) >> 4;
#if !defined(CONFIG_TARGET_LOCALE_NTT) // disable tethering xmoondash
vtp_sel = (switch_sel & (int)(USB_VTP_MASK)) >> 5;
#endif
askon_sel = (switch_sel & (int)(USB_ASKON_MASK)) >> 6;
printk("\n[WJ] %s, %s, switch_sel=%d\n", __FILE__, __FUNCTION__, switch_sel);
if( samsung_kies_sel ) currentusbstatus = USBSTATUS_SAMSUNG_KIES;
else if(ums_sel) currentusbstatus = USBSTATUS_UMS;
else if(mtp_sel) currentusbstatus = USBSTATUS_MTPONLY;
else if(askon_sel) currentusbstatus = USBSTATUS_ASKON;
if((switch_sel == 0x1) || (factoryresetstatus == 0xAE)) {
PathSelStore(AP_USB_MODE);
Ap_Cp_Switch_Config(AP_USB_MODE);
usb_switching_value_update(SWITCH_PDA);
PathSelStore(CP_UART_MODE);
Ap_Cp_Switch_Config(CP_UART_MODE);
uart_switching_value_update(SWITCH_MODEM);
}
else {
if(usb_sel) {
Ap_Cp_Switch_Config(AP_USB_MODE);
usb_switching_value_update(SWITCH_PDA);
}
else {
if(MicroJigUARTOffStatus) {
Ap_Cp_Switch_Config(AP_USB_MODE);
}
else {
Ap_Cp_Switch_Config(CP_USB_MODE);
usb_switching_value_update(SWITCH_MODEM);
}
}
if(uart_sel) {
Ap_Cp_Switch_Config(AP_UART_MODE);
uart_switching_value_update(SWITCH_PDA);
}
else {
Ap_Cp_Switch_Config(CP_UART_MODE);
uart_switching_value_update(SWITCH_MODEM);
}
}
/*Turn off usb power when LPM mode*/
if(lpm_mode_check)
otg_phy_off();
switching_value_update();
if((switch_sel == 1) || (factoryresetstatus == 0xAE)) {
usb_switch_select(USBSTATUS_SAMSUNG_KIES);
mtp_mode_on = 1;
ap_usb_power_on(0);
UsbMenuSelStore(0);
}
else {
if(usb_sel) {
if(samsung_kies_sel) {
usb_switch_select(USBSTATUS_SAMSUNG_KIES);
/*USB Power off till MTP Appl launching*/
#ifdef _SUPPORT_SAMSUNG_AUTOINSTALLER_
//mtp_mode_on = 1;
//ap_usb_power_on(0);
#else
mtp_mode_on = 1;
ap_usb_power_on(0);
#endif
}
else if(mtp_sel) {
usb_switch_select(USBSTATUS_MTPONLY);
/*USB Power off till MTP Appl launching*/
mtp_mode_on = 1;
ap_usb_power_on(0);
}
else if(ums_sel) {
usb_switch_select(USBSTATUS_UMS);
}
#if !defined(CONFIG_TARGET_LOCALE_NTT) // disable tethering xmoondash
else if(vtp_sel) {
usb_switch_select(USBSTATUS_VTP);
}
#endif
else if(askon_sel) {
usb_switch_select(USBSTATUS_ASKON);
}
}
}
if(!FSA9480_Get_USB_Status()) {
s3c_usb_cable(1);
mdelay(5);
s3c_usb_cable(0);
}
else {
s3c_usb_cable(1);
indicator_dev.state = 1;
}
dmsg("switch_sel : 0x%x\n", switch_sel);
microusb_uart_status(1);
connectivity_switching_init_state=1;
}
