static int my3126_interrupt_handler(struct cphy *cphy)
{
u32 val;
u16 val16;
u16 status;
u32 act_count;
adapter_t *adapter;
adapter = cphy->adapter;
if (cphy->count == 50) {
mdio_read(cphy, 0x1, 0x1, &val);
val16 = (u16) val;
status = cphy->bmsr ^ val16;
if (status & BMSR_LSTATUS)
t1_link_changed(adapter, 0);
cphy->bmsr = val16;
/* We have only enabled link change interrupts so it
must be that
*/
cphy->count = 0;
}
t1_tpi_write(adapter, OFFSET(SUNI1x10GEXP_REG_MSTAT_CONTROL),
SUNI1x10GEXP_BITMSK_MSTAT_SNAP);
t1_tpi_read(adapter,
OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW), &act_count);
t1_tpi_read(adapter,
OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW), &val);
act_count += val;
/* Populate elmer_gpo with the register value */
t1_tpi_read(adapter, A_ELMER0_GPO, &val);
cphy->elmer_gpo = val;
if ( (val & (1 << 8)) || (val & (1 << 19)) ||
(cphy->act_count == act_count) || cphy->act_on ) {
if (is_T2(adapter))
val |= (1 << 9);
else if (t1_is_T1B(adapter))
val |= (1 << 20);
cphy->act_on = 0;
} else {
if (is_T2(adapter))
val &= ~(1 << 9);
else if (t1_is_T1B(adapter))
val &= ~(1 << 20);
cphy->act_on = 1;
}
t1_tpi_write(adapter, A_ELMER0_GPO, val);
cphy->elmer_gpo = val;
cphy->act_count = act_count;
cphy->count++;
return cphy_cause_link_change;
}
static int pm3393_interrupt_clear(struct cmac *cmac)
{
u32 elmer;
u32 pl_intr;
u32 val32;
pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION,
&val32);
pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32);
pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32);
t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT1;
t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer);
pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE);
pl_intr |= F_PL_INTR_EXT;
writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE);
return 0;
}
static int mv88x201x_interrupt_clear(struct cphy *cphy)
{
u32 elmer;
u32 val;
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Required to read twice before clear takes affect. */
mdio_read(cphy, 0x1, 0x9003, &val);
mdio_read(cphy, 0x1, 0x9004, &val);
mdio_read(cphy, 0x1, 0x9005, &val);
/* Read this register after the others above it else
* the register doesn't clear correctly.
*/
mdio_read(cphy, 0x1, 0x1, &val);
#endif
/* Clear link status. */
mdio_read(cphy, 0x1, 0x1, &val);
/* Clear PHY LASI interrupts. */
mdio_read(cphy, 0x1, 0x9005, &val);
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Do it again. */
mdio_read(cphy, 0x1, 0x9003, &val);
mdio_read(cphy, 0x1, 0x9004, &val);
#endif
/* Clear Marvell interrupts through Elmer0. */
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT6;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
return 0;
}
static int pm3393_interrupt_disable(struct cmac *cmac)
{
u32 elmer;
pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0);
t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT1;
t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer);
return 0;
}
/* Chip Reset */
static int mv88x201x_phy_reset(adapter_t *adapter)
{
u32 val;
t1_tpi_read(adapter, A_ELMER0_GPO, &val);
val &= ~4;
t1_tpi_write(adapter, A_ELMER0_GPO, val);
msleep(100);
t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
msleep(1000);
/* Now lets enable the Laser. Delay 100us */
t1_tpi_read(adapter, A_ELMER0_GPO, &val);
val |= 0x8000;
t1_tpi_write(adapter, A_ELMER0_GPO, val);
udelay(100);
return 0;
}
/* Chip Reset */
static int mv88x201x_phy_reset(adapter_t *adapter)
{
u32 val;
(void) t1_tpi_read(adapter, A_ELMER0_GPO, &val);
val &= ~4;
(void) t1_tpi_write(adapter, A_ELMER0_GPO, val);
DELAY_MS(100);
(void) t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
DELAY_MS(1000);
/* Now lets enable the Laser. Delay 100us */
(void) t1_tpi_read(adapter, A_ELMER0_GPO, &val);
val |= 0x8000;
(void) t1_tpi_write(adapter, A_ELMER0_GPO, val);
DELAY_US(100);
return 0;
}
static int mv88x201x_interrupt_disable(struct cphy *cphy)
{
u32 elmer;
/* Disable PHY LASI interrupts. */
mdio_write(cphy, 0x1, 0x9002, 0x0);
/* Disable Marvell interrupts through Elmer0. */
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT6;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
return 0;
}
/*
* External interrupt handler for boards using elmer0.
*/
int t1_elmer0_ext_intr_handler(adapter_t *adapter)
{
struct cphy *phy;
int phy_cause;
u32 cause;
t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
switch (board_info(adapter)->board) {
#ifdef CONFIG_CHELSIO_T1_1G
case CHBT_BOARD_CHT204:
case CHBT_BOARD_CHT204E:
case CHBT_BOARD_CHN204:
case CHBT_BOARD_CHT204V: {
int i, port_bit;
for_each_port(adapter, i) {
port_bit = i + 1;
if (!(cause & (1 << port_bit)))
continue;
phy = adapter->port[i].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, i);
}
break;
}
case CHBT_BOARD_CHT101:
if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */
phy = adapter->port[0].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, 0);
}
break;
case CHBT_BOARD_7500: {
int p;
/*
* Elmer0's interrupt cause isn't useful here because there is
* only one bit that can be set for all 4 ports. This means
* we are forced to check every PHY's interrupt status
* register to see who initiated the interrupt.
*/
for_each_port(adapter, p) {
phy = adapter->port[p].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, p);
}
break;
}
static int mv88x201x_interrupt_disable(struct cphy *cphy)
{
/* Disable PHY LASI interrupts. */
cphy_mdio_write(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_CTRL, 0x0);
/* Disable Marvell interrupts through Elmer0. */
if (t1_is_asic(cphy->adapter)) {
u32 elmer;
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT6;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
}
static int mv88x201x_interrupt_enable(struct cphy *cphy)
{
/* Enable PHY LASI interrupts. */
(void) mdio_write(cphy, 0x1, 0x9002, 0x1);
/* Enable Marvell interrupts through Elmer0. */
if (t1_is_asic(cphy->adapter)) {
u32 elmer;
(void) t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer |= ELMER0_GP_BIT6;
(void) t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
}
int t1_elmer0_ext_intr_handler(adapter_t *adapter)
{
struct cphy *phy;
int phy_cause;
u32 cause;
t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
switch (board_info(adapter)->board) {
#ifdef CONFIG_CHELSIO_T1_1G
case CHBT_BOARD_CHT204:
case CHBT_BOARD_CHT204E:
case CHBT_BOARD_CHN204:
case CHBT_BOARD_CHT204V: {
int i, port_bit;
for_each_port(adapter, i) {
port_bit = i + 1;
if (!(cause & (1 << port_bit)))
continue;
phy = adapter->port[i].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, i);
}
break;
}
case CHBT_BOARD_CHT101:
if (cause & ELMER0_GP_BIT1) {
phy = adapter->port[0].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, 0);
}
break;
case CHBT_BOARD_7500: {
int p;
for_each_port(adapter, p) {
phy = adapter->port[p].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, p);
}
break;
}
static int mv88e1xxx_interrupt_disable(struct cphy *cphy)
{
/* Disable all phy interrupts. */
(void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER, 0);
/* Disable Marvell interrupts through Elmer0. */
if (t1_is_asic(cphy->adapter)) {
u32 elmer;
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT1;
if (is_T2(cphy->adapter))
elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
}
static int mv88e1xxx_interrupt_clear(struct cphy *cphy)
{
u32 elmer;
/* Clear PHY interrupts by reading the register. */
(void) simple_mdio_read(cphy,
MV88E1XXX_INTERRUPT_STATUS_REGISTER, &elmer);
/* Clear Marvell interrupts through Elmer0. */
if (t1_is_asic(cphy->adapter)) {
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT1;
if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
}
return 0;
}
static int mv88e1xxx_interrupt_enable(struct cphy *cphy)
{
(void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER,
INTR_ENABLE_MASK);
if (t1_is_asic(cphy->adapter)) {
u32 elmer;
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer |= ELMER0_GP_BIT1;
if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2 | ELMER0_GP_BIT3 | ELMER0_GP_BIT4;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
}
static int mv88e1xxx_interrupt_clear(struct cphy *cphy)
{
u32 elmer;
(void) simple_mdio_read(cphy,
MV88E1XXX_INTERRUPT_STATUS_REGISTER, &elmer);
if (t1_is_asic(cphy->adapter)) {
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT1;
if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
}
return 0;
}
static int mv88e1xxx_interrupt_enable(struct cphy *cphy)
{
/* Enable PHY interrupts. */
(void) simple_mdio_write(cphy, MV88E1XXX_INTERRUPT_ENABLE_REGISTER,
INTR_ENABLE_MASK);
/* Enable Marvell interrupts through Elmer0. */
if (t1_is_asic(cphy->adapter)) {
u32 elmer;
(void) t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer |= ELMER0_GP_BIT1;
if (is_T2(cphy->adapter)) {
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
}
(void) t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
}
static int pm3393_interrupt_clear(struct cmac *cmac)
{
u32 elmer;
u32 pl_intr;
u32 val32;
/* PM3393 - Clearing HW interrupt blocks. Note, this assumes
* bit WCIMODE=0 for a clear-on-read.
*/
pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32);
pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION,
&val32);
pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32);
pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32);
/* PM3393 - Global interrupt status
*/
pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32);
/* ELMER - External chip interrupts.
*/
t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT1;
t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer);
/* TERMINATOR - PL_INTERUPTS_EXT
*/
pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE);
pl_intr |= F_PL_INTR_EXT;
writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE);
return 0;
}
/* To check the activity LED */
static int my3126_get_link_status(struct cphy *cphy,
int *link_ok, int *speed, int *duplex, int *fc)
{
u32 val;
u16 val16;
adapter_t *adapter;
adapter = cphy->adapter;
mdio_read(cphy, 0x1, 0x1, &val);
val16 = (u16) val;
/* Populate elmer_gpo with the register value */
t1_tpi_read(adapter, A_ELMER0_GPO, &val);
cphy->elmer_gpo = val;
*link_ok = (val16 & BMSR_LSTATUS);
if (*link_ok) {
/* Turn on the LED. */
if (is_T2(adapter))
val &= ~(1 << 8);
else if (t1_is_T1B(adapter))
val &= ~(1 << 19);
} else {
/* Turn off the LED. */
if (is_T2(adapter))
val |= (1 << 8);
else if (t1_is_T1B(adapter))
val |= (1 << 19);
}
t1_tpi_write(adapter, A_ELMER0_GPO, val);
cphy->elmer_gpo = val;
*speed = SPEED_10000;
*duplex = DUPLEX_FULL;
/* need to add flow control */
if (fc)
*fc = PAUSE_RX | PAUSE_TX;
return 0;
}
/*
* External interrupt handler for boards using elmer0.
*/
int elmer0_ext_intr_handler(adapter_t *adapter)
{
struct cphy *phy;
int phy_cause;
u32 cause;
t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
switch (board_info(adapter)->board) {
case CHBT_BOARD_N210:
case CHBT_BOARD_N110:
if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
phy = adapter->port[0].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
link_changed(adapter, 0);
}
break;
}
t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
return 0;
}
static int pm3393_interrupt_disable(struct cmac *cmac)
{
u32 elmer;
/* PM3393 - Enabling HW interrupt blocks. */
pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0);
pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0);
/* PM3393 - Global interrupt enable */
pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0);
/* ELMER - External chip interrupts. */
t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT1;
t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer);
/* TERMINATOR - PL_INTERUPTS_EXT */
/* DO NOT DISABLE TERMINATOR's EXTERNAL INTERRUPTS. ANOTHER CHIP
* COULD WANT THEM ENABLED. We disable PM3393 at the ELMER level.
*/
return 0;
}
static int mv88x201x_interrupt_clear(struct cphy *cphy)
{
u32 elmer;
u32 val;
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Required to read twice before clear takes affect. */
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
/* Read this register after the others above it else
* the register doesn't clear correctly.
*/
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
#endif
/* Clear link status. */
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);
/* Clear PHY LASI interrupts. */
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_STAT, &val);
#ifdef MV88x2010_LINK_STATUS_BUGS
/* Do it again. */
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_RXSTAT, &val);
cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_PMA_LASI_TXSTAT, &val);
#endif
/* Clear Marvell interrupts through Elmer0. */
if (t1_is_asic(cphy->adapter)) {
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT6;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
}
return 0;
}
static int my3126_interrupt_enable(struct cphy *cphy)
{
schedule_delayed_work(&cphy->phy_update, HZ/30);
t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
return 0;
}
static int pmread(struct cmac *cmac, u32 reg, u32 * data32)
{
t1_tpi_read(cmac->adapter, OFFSET(reg), data32);
return 0;
}
