예제 #1
0
파일: up_initialize.c 프로젝트: a1ien/nuttx
void up_initialize(void)
{
  /* Initialize global variables */

  g_current_regs = NULL;

  /* Calibrate the timing loop */

  up_calibratedelay();

  /* Initialize the interrupt subsystem */

  up_irqinitialize();

#ifdef CONFIG_PM
  /* Initialize the power management subsystem.  This MCU-specific function
   * must be called *very* early in the initialization sequence *before* any
   * other device drivers are initialized (since they may attempt to register
   * with the power management subsystem).
   */

  up_pminitialize();
#endif

#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
  /* Initialize the system timer interrupt */

  up_timer_initialize();
#endif

  /* Register devices */

#if CONFIG_NFILE_DESCRIPTORS > 0

#if defined(CONFIG_DEV_NULL)
  devnull_register();   /* Standard /dev/null */
#endif

#if defined(CONFIG_DEV_RANDOM)
  devrandom_register(); /* Standard /dev/random */
#endif

#if defined(CONFIG_DEV_URANDOM)
  devurandom_register();   /* Standard /dev/urandom */
#endif

#if defined(CONFIG_DEV_ZERO)
  devzero_register();   /* Standard /dev/zero */
#endif

#if defined(CONFIG_DEV_LOOP)
  loop_register();      /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */

#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
    defined(CONFIG_DRIVER_NOTE)
  note_register();      /* Non-standard /dev/note */
#endif

  /* Initialize the serial device driver */

#ifdef USE_SERIALDRIVER
  up_serialinit();
#endif

  /* Initialize the console device driver (if it is other than the standard
   * serial driver). NOTE that the naming implies that the console is a serial
   * driver.  That is usually the case, however, if no UARTs are enabled, the
   * console could als be provided through some other device, such as an LCD.
   * Architecture-specific logic will have to detect that case.
   */

#if defined(CONFIG_DEV_LOWCONSOLE)
  lowconsole_init();
#elif defined(CONFIG_CONSOLE_SYSLOG)
  syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
  ramlog_consoleinit();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
  /* Register the master pseudo-terminal multiplexor device */

  (void)ptmx_register();
#endif

  /* Early initialization of the system logging device.  Some SYSLOG channel
   * can be initialized early in the initialization sequence because they
   * depend on only minimal OS initialization.
   */

  syslog_initialize(SYSLOG_INIT_EARLY);

#if defined(CONFIG_CRYPTO)
  /* Initialize the HW crypto and /dev/crypto */

  up_cryptoinitialize();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_CRYPTO_CRYPTODEV)
  devcrypto_register();
#endif

#ifndef CONFIG_NETDEV_LATEINIT
  /* Initialize the network */

  up_netinitialize();
#endif

#ifdef CONFIG_NETDEV_LOOPBACK
  /* Initialize the local loopback device */

  (void)localhost_initialize();
#endif

#ifdef CONFIG_NET_TUN
  /* Initialize the TUN device */

  (void)tun_initialize();
#endif

#ifdef CONFIG_NETDEV_TELNET
  /* Initialize the Telnet session factory */

  (void)telnet_initialize();
#endif

  /* Initialize USB */

  up_usbinitialize();

  board_autoled_on(LED_IRQSENABLED);
}
예제 #2
0
void up_initialize(void)
{
#ifdef CONFIG_SMP
  int i;

  /* Initialize global variables */

  for (i = 0; i < CONFIG_SMP_NCPUS; i++)
    {
      g_current_regs[i] = NULL;
    }
#else
  CURRENT_REGS = NULL;
#endif

  /* Add any extra memory fragments to the memory manager */

  xtensa_add_region();

  /* Initialize the interrupt subsystem */

  xtensa_irq_initialize();

#ifdef CONFIG_PM
  /* Initialize the power management subsystem.  This MCU-specific function
   * must be called *very* early in the initialization sequence *before* any
   * other device drivers are initialized (since they may attempt to register
   * with the power management subsystem).
   */

  up_pminitialize();
#endif

#ifdef CONFIG_ARCH_DMA
  /* Initialize the DMA subsystem if the weak function xtensa_dma_initialize
   * has been brought into the build
   */

#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (xtensa_dma_initialize)
#endif
    {
      xtensa_dma_initialize();
    }
#endif

#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
  /* Initialize the system timer interrupt */

  xtensa_timer_initialize();
#endif

#ifdef CONFIG_MM_IOB
  /* Initialize IO buffering */

  iob_initialize();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0
  /* Register devices */

#if defined(CONFIG_DEV_NULL)
  devnull_register();   /* Standard /dev/null */
#endif

#if defined(CONFIG_DEV_RANDOM)
  devrandom_register(); /* Standard /dev/random */
#endif

#if defined(CONFIG_DEV_URANDOM)
  devurandom_register();   /* Standard /dev/urandom */
#endif

#if defined(CONFIG_DEV_ZERO)
  devzero_register();   /* Standard /dev/zero */
#endif

#if defined(CONFIG_DEV_LOOP)
  loop_register();      /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */

#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
    defined(CONFIG_DRIVER_NOTE)
  note_register();      /* Non-standard /dev/note */
#endif

  /* Initialize the serial device driver */

#ifdef USE_SERIALDRIVER
  xtensa_serial_initialize();
#endif

  /* Initialize the console device driver (if it is other than the standard
   * serial driver).
   */

#if defined(CONFIG_DEV_LOWCONSOLE)
  lowconsole_init();
#elif defined(CONFIG_CONSOLE_SYSLOG)
  syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
  ramlog_consoleinit();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
  /* Register the master pseudo-terminal multiplexor device */

  (void)ptmx_register();
#endif

  /* Early initialization of the system logging device.  Some SYSLOG channel
   * can be initialized early in the initialization sequence because they
   * depend on only minimal OS initialization.
   */

  syslog_initialize(SYSLOG_INIT_EARLY);

#if defined(CONFIG_CRYPTO)
  /* Initialize the HW crypto and /dev/crypto */

  up_cryptoinitialize();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_CRYPTO_CRYPTODEV)
  devcrypto_register();
#endif

#ifndef CONFIG_NETDEV_LATEINIT
  /* Initialize the network */

  up_netinitialize();
#endif

#ifdef CONFIG_NETDEV_LOOPBACK
  /* Initialize the local loopback device */

  (void)localhost_initialize();
#endif

#ifdef CONFIG_NET_TUN
  /* Initialize the TUN device */

  (void)tun_initialize();
#endif

#ifdef CONFIG_NETDEV_TELNET
  /* Initialize the Telnet session factory */

  (void)telnet_initialize();
#endif

  /* Initialize USB -- device and/or host */

  up_usbinitialize();
  board_autoled_on(LED_IRQSENABLED);
}
예제 #3
0
void up_initialize(void)
{
#ifdef CONFIG_NET
  /* The real purpose of the following is to make sure that syslog
   * is drawn into the link.  It is needed by up_tapdev which is linked
   * separately.
   */

  syslog(LOG_INFO, "SIM: Initializing\n");
#endif

#ifdef CONFIG_PM
  /* Initialize the power management subsystem.  This MCU-specific function
   * must be called *very* early in the initialization sequence *before* any
   * other device drivers are initialized (since they may attempt to register
   * with the power management subsystem).
   */

  up_pminitialize();
#endif

#ifdef CONFIG_MM_IOB
  /* Initialize IO buffering */

  iob_initialize();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0
  /* Register devices */

#if defined(CONFIG_DEV_NULL)
  devnull_register();       /* Standard /dev/null */
#endif

#if defined(CONFIG_DEV_RANDOM)
  devrandom_register(); /* Standard /dev/random */
#endif

#if defined(CONFIG_DEV_URANDOM)
  devurandom_register();   /* Standard /dev/urandom */
#endif

#if defined(CONFIG_DEV_ZERO)
  devzero_register();       /* Standard /dev/zero */
#endif

#if defined(CONFIG_DEV_LOOP)
  loop_register();          /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */

#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
    defined(CONFIG_DRIVER_NOTE)
  note_register();          /* Non-standard /dev/note */
#endif

#if defined(USE_DEVCONSOLE)
  /* Start the sumulated UART device */

  simuart_start();

  /* Register a console (or not) */

  up_devconsole();          /* Our private /dev/console */
#elif defined(CONFIG_CONSOLE_SYSLOG)
  syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
  ramlog_consoleinit();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
  /* Register the master pseudo-terminal multiplexor device */

  (void)ptmx_register();
#endif

  /* Early initialization of the system logging device.  Some SYSLOG channel
   * can be initialized early in the initialization sequence because they
   * depend on only minimal OS initialization.
   */

  syslog_initialize(SYSLOG_INIT_EARLY);

#if defined(CONFIG_CRYPTO)
  /* Initialize the HW crypto and /dev/crypto */

  up_cryptoinitialize();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_CRYPTO_CRYPTODEV)
  devcrypto_register();
#endif

#if defined(CONFIG_FS_FAT) && !defined(CONFIG_DISABLE_MOUNTPOINT)
  up_registerblockdevice(); /* Our FAT ramdisk at /dev/ram0 */
#endif

#if defined(CONFIG_NET_ETHERNET) && defined(CONFIG_SIM_NETDEV)
  netdriver_init();         /* Our "real" network driver */
#endif

#ifdef CONFIG_NETDEV_LOOPBACK
  /* Initialize the local loopback device */

  (void)localhost_initialize();
#endif

#ifdef CONFIG_NET_TUN
  /* Initialize the TUN device */

  (void)tun_initialize();
#endif

#ifdef CONFIG_NETDEV_TELNET
  /* Initialize the Telnet session factory */

  (void)telnet_initialize();
#endif

#if defined(CONFIG_FS_SMARTFS) && (defined(CONFIG_SIM_SPIFLASH) || defined(CONFIG_SIM_QSPIFLASH))
  up_init_smartfs();
#endif
}
예제 #4
0
void up_initialize(void)
{
  /* Initialize global variables */

  g_current_regs = NULL;

  /* Calibrate the timing loop */

  up_calibratedelay();

  /* Colorize the interrupt stack */

  up_color_intstack();

  /* Add any extra memory fragments to the memory manager */

  up_addregion();

  /* Initialize the interrupt subsystem */

  up_irqinitialize();

  /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
   * brought into the build
   */

#ifdef CONFIG_ARCH_DMA
#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (up_dmainitialize)
#endif
    {
      up_dmainitialize();
    }
#endif

  /* Initialize the system timer interrupt */

#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
  up_timer_initialize();
#endif

  /* Register devices */

#if CONFIG_NFILE_DESCRIPTORS > 0

#if defined(CONFIG_DEV_NULL)
  devnull_register();   /* Standard /dev/null */
#endif

#if defined(CONFIG_DEV_ZERO)
  devzero_register();   /* Standard /dev/zero */
#endif

#if defined(CONFIG_DEV_LOOP)
  loop_register();      /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */

#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
    defined(CONFIG_DRIVER_NOTE)
  note_register();      /* Non-standard /dev/note */
#endif

  /* Initialize the serial device driver */

#ifdef USE_SERIALDRIVER
  up_serialinit();
#endif

  /* Initialize the console device driver (if it is other than the standard
   * serial driver).
   */

#if defined(CONFIG_DEV_LOWCONSOLE)
  lowconsole_init();
#elif defined(CONFIG_SYSLOG_CONSOLE)
  syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
  ramlog_consoleinit();
#endif

  /* Initialize the system logging device */

#ifdef CONFIG_SYSLOG_CHAR
  syslog_initialize();
#endif
#ifdef CONFIG_RAMLOG_SYSLOG
  ramlog_sysloginit();
#endif

#ifndef CONFIG_NETDEV_LATEINIT
  /* Initialize the network */

  up_netinitialize();
#endif

#ifdef CONFIG_NETDEV_LOOPBACK
  /* Initialize the local loopback device */

  (void)localhost_initialize();
#endif

#ifdef CONFIG_NET_TUN
  /* Initialize the TUN device */

  (void)tun_initialize();
#endif

#ifdef CONFIG_NETDEV_TELNET
  /* Initialize the Telnet session factory */

  (void)telnet_initialize();
#endif

  /* Initialize USB */

  up_usbinitialize();

#if defined(ARCH_HAVE_LEDS)
  board_autoled_on(LED_IRQSENABLED);
#endif
}
예제 #5
0
void up_initialize(void)
{
  /* Initialize global variables */

  INIT_IRQCONTEXT();

  /* Calibrate the timing loop */

  up_calibratedelay();

#if CONFIG_MM_REGIONS > 1
  /* Add any extra memory fragments to the memory manager */

  up_addregion();
#endif

  /* Initialize the interrupt subsystem */

  up_irqinitialize();

#ifdef CONFIG_PM
  /* Initialize the power management subsystem.  This MCU-specific function
   * must be called *very* early in the initialization sequence *before* any
   * other device drivers are initialized (since they may attempt to register
   * with the power management subsystem).
   */

  up_pminitialize();
#endif

#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
  /* Initialize the system timer interrupt */

  z80_timer_initialize();
#endif

  /* Initialize the CPU for those that use it (only for the Z180).  This
   * needs to be done before any tasks are created).
   */

#ifdef CONFIG_ARCH_ADDRENV
  (void)up_mmuinit();
#endif

#ifdef CONFIG_MM_IOB
  /* Initialize IO buffering */

  iob_initialize();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0
  /* Register devices */

#if defined(CONFIG_DEV_NULL)
  devnull_register();   /* Standard /dev/null */
#endif

#if defined(CONFIG_DEV_RANDOM)
  devrandom_register(); /* Standard /dev/random */
#endif

#if defined(CONFIG_DEV_URANDOM)
  devurandom_register();   /* Standard /dev/urandom */
#endif

#if defined(CONFIG_DEV_ZERO)
  devzero_register();   /* Standard /dev/zero */
#endif

#if defined(CONFIG_DEV_LOOP)
  loop_register();      /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */

#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
    defined(CONFIG_DRIVER_NOTE)
  note_register();      /* Non-standard /dev/note */
#endif

  /* Initialize the serial device driver */

#ifdef USE_SERIALDRIVER
  up_serialinit();
#endif

  /* Initialize the console device driver (if it is other than the standard
   * serial driver).
   */

#if defined(CONFIG_DEV_LOWCONSOLE)
  lowconsole_init();
#elif defined(CONFIG_CONSOLE_SYSLOG)
  syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
  ramlog_consoleinit();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
  /* Register the master pseudo-terminal multiplexor device */

  (void)ptmx_register();
#endif

  /* Early initialization of the system logging device.  Some SYSLOG channel
   * can be initialized early in the initialization sequence because they
   * depend on minimal OS initialization.
   */

  syslog_initialize(SYSLOG_INIT_EARLY);

#if defined(CONFIG_CRYPTO)
  /* Initialize the HW crypto and /dev/crypto */

  up_cryptoinitialize();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_CRYPTO_CRYPTODEV)
  devcrypto_register();
#endif

#ifndef CONFIG_NETDEV_LATEINIT
  /* Initialize the network */

  up_netinitialize();
#endif

#ifdef CONFIG_NETDEV_LOOPBACK
  /* Initialize the local loopback device */

  (void)localhost_initialize();
#endif

#ifdef CONFIG_NET_TUN
  /* Initialize the TUN device */

  (void)tun_initialize();
#endif

#ifdef CONFIG_NETDEV_TELNET
  /* Initialize the Telnet session factory */

  (void)telnet_initialize();
#endif

  board_autoled_on(LED_IRQSENABLED);
}
예제 #6
0
void up_initialize(void)
{
  /* Initialize global variables */

  g_current_regs = NULL;

  /* Calibrate the timing loop */

  up_calibratedelay();

  /* Add any extra memory fragments to the memory manager */

  up_addregion();

  /* Initialize the interrupt subsystem */

  up_irqinitialize();

  /* Initialize the DMA subsystem if the weak function stm32_dmainitialize has been
   * brought into the build
   */

#ifdef CONFIG_ARCH_DMA
#ifdef CONFIG_HAVE_WEAKFUNCTIONS
  if (up_dmainitialize)
#endif
    {
      up_dmainitialize();
    }
#endif

  /* Initialize the system timer interrupt */

#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
  up_timer_initialize();
#endif

  /* Register devices */

#if CONFIG_NFILE_DESCRIPTORS > 0

#if defined(CONFIG_DEV_NULL)
  devnull_register();   /* Standard /dev/null */
#endif

#if defined(CONFIG_DEV_ZERO)
  devzero_register();   /* Standard /dev/zero */
#endif

#if defined(CONFIG_DEV_LOOP)
  loop_register();      /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */

#if defined(CONFIG_SCHED_INSTRUMENTATION_BUFFER) && \
    defined(CONFIG_DRIVER_NOTE)
  note_register();      /* Non-standard /dev/note */
#endif

  /* Initialize the serial device driver */

#ifdef USE_SERIALDRIVER
  up_serialinit();
#endif

  /* Initialize the console device driver (if it is other than the standard
   * serial driver).
   */

#if defined(CONFIG_DEV_LOWCONSOLE)
  lowconsole_init();
#elif defined(CONFIG_CONSOLE_SYSLOG)
  syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
  ramlog_consoleinit();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_PSEUDOTERM_SUSV1)
  /* Register the master pseudo-terminal multiplexor device */

  (void)ptmx_register();
#endif

  /* Early initialization of the system logging device.  Some SYSLOG channel
   * can be initialized early in the initialization sequence because they
   * depend on only minimal OS initialization.
   */

  syslog_initialize(SYSLOG_INIT_EARLY);

#if defined(CONFIG_CRYPTO)
  /* Initialize the HW crypto and /dev/crypto */

  up_cryptoinitialize();
#endif

#if CONFIG_NFILE_DESCRIPTORS > 0 && defined(CONFIG_CRYPTO_CRYPTODEV)
  devcrypto_register();
#endif

#ifdef CONFIG_DEV_RANDOM
  /* Initialize the Random Number Generator (RNG)  */

  up_rnginitialize();
#endif

#ifndef CONFIG_NETDEV_LATEINIT
  /* Initialize the network */

  up_netinitialize();
#endif

#ifdef CONFIG_NETDEV_LOOPBACK
  /* Initialize the local loopback device */

  (void)localhost_initialize();
#endif

#ifdef CONFIG_NET_TUN
  /* Initialize the TUN device */

  (void)tun_initialize();
#endif

#ifdef CONFIG_NETDEV_TELNET
  /* Initialize the Telnet session factory */

  (void)telnet_initialize();
#endif

  /* Initialize USB -- device and/or host */

  up_usbinitialize();
  board_autoled_on(LED_IRQSENABLED);
}
예제 #7
0
void up_initialize(void)
{
  /* Initialize global variables */

  current_regs = NULL;

  /* Calibrate the timing loop */

  up_calibratedelay();

  /* Add any extra memory fragments to the memory manager */

#if CONFIG_MM_REGIONS > 1
  up_addregion();
#endif

  /* Initialize the interrupt subsystem */

  up_irqinitialize();

  /* Initialize the system timer interrupt */

#if !defined(CONFIG_SUPPRESS_INTERRUPTS) && !defined(CONFIG_SUPPRESS_TIMER_INTS)
  up_timer_initialize();
#endif

  /* Register devices */

#if CONFIG_NFILE_DESCRIPTORS > 0

#if defined(CONFIG_DEV_NULL)
  devnull_register();   /* Standard /dev/null */
#endif

#if defined(CONFIG_DEV_ZERO)
  devzero_register();   /* Standard /dev/zero */
#endif

#if defined(CONFIG_DEV_LOOP)
  loop_register();      /* Standard /dev/loop */
#endif
#endif /* CONFIG_NFILE_DESCRIPTORS */

  /* Initialize the serial device driver */

#ifdef USE_SERIALDRIVER
  up_serialinit();
#endif

  /* Initialize the console device driver (if it is other than the standard
   * serial driver).
   */

#if defined(CONFIG_DEV_LOWCONSOLE)
  lowconsole_init();
#elif defined(CONFIG_SYSLOG_CONSOLE)
  syslog_console_init();
#elif defined(CONFIG_RAMLOG_CONSOLE)
  ramlog_consoleinit();
#endif

  /* Initialize the system logging device */

#ifdef CONFIG_SYSLOG_CHAR
  syslog_initialize();
#endif
#ifdef CONFIG_RAMLOG_SYSLOG
  ramlog_sysloginit();
#endif

#ifndef CONFIG_NETDEV_LATEINIT
  /* Initialize the network */

  up_netinitialize();
#endif

#ifdef CONFIG_NETDEV_LOOPBACK
  /* Initialize the local loopback device */

  (void)localhost_initialize();
#endif

#ifdef CONFIG_NET_TUN
  /* Initialize the TUN device */

  (void)tun_initialize();
#endif

#ifdef CONFIG_NETDEV_TELNET
  /* Initialize the Telnet session factory */

  (void)telnet_initialize();
#endif

  board_autoled_on(LED_IRQSENABLED);
}