ucg_int_t ucg_dev_ili9341_18x240x320(ucg_t *ucg, ucg_int_t msg, void *data)
{
switch(msg)
{
case UCG_MSG_DEV_POWER_UP:
/* 1. Call to the controller procedures to setup the com interface */
if ( ucg_dev_ic_ili9341_18(ucg, msg, data) == 0 )
return 0;
/* 2. Send specific init sequence for this display module */
ucg_com_SendCmdSeq(ucg, ucg_tft_240x320_ili9341_init_seq);
return 1;
case UCG_MSG_DEV_POWER_DOWN:
/* let do power down by the conroller procedures */
return ucg_dev_ic_ili9341_18(ucg, msg, data);
case UCG_MSG_GET_DIMENSION:
((ucg_wh_t *)data)->w = 240;
((ucg_wh_t *)data)->h = 320;
return 1;
}
/* all other messages are handled by the controller procedures */
return ucg_dev_ic_ili9341_18(ucg, msg, data);
}
static ucg_int_t ucg_handle_ld50t6160_l90tc(ucg_t *ucg)
{
if ( ucg_clip_l90tc(ucg) != 0 )
{
uint8_t buf[3];
ucg_int_t dx, dy;
ucg_int_t i;
const uint8_t *seq;
unsigned char pixmap;
uint8_t bitcnt;
ucg_com_SetCSLineStatus(ucg, 0); /* enable chip */
switch(ucg->arg.dir)
{
case 0:
dx = 1; dy = 0;
seq = ucg_ld50t6160_set_pos_dir0_seq;
break;
case 1:
dx = 0; dy = 1;
seq = ucg_ld50t6160_set_pos_dir1_seq;
break;
case 2:
dx = -1; dy = 0;
seq = ucg_ld50t6160_set_pos_dir2_seq;
break;
case 3:
default:
dx = 0; dy = -1;
seq = ucg_ld50t6160_set_pos_dir3_seq;
break;
}
pixmap = ucg_pgm_read(ucg->arg.bitmap);
bitcnt = ucg->arg.pixel_skip;
pixmap <<= bitcnt;
buf[0] = ucg->arg.pixel.rgb.color[0]>>2;
buf[1] = ucg->arg.pixel.rgb.color[1]>>2;
buf[2] = ucg->arg.pixel.rgb.color[2]>>2;
for( i = 0; i < ucg->arg.len; i++ )
{
if ( (pixmap & 128) != 0 )
{
ucg_com_SendCmdSeq(ucg, seq);
ucg_com_SendRepeat3Bytes(ucg, 1, buf);
}
pixmap<<=1;
ucg->arg.pixel.pos.x+=dx;
ucg->arg.pixel.pos.y+=dy;
bitcnt++;
if ( bitcnt >= 8 )
{
ucg->arg.bitmap++;
pixmap = ucg_pgm_read(ucg->arg.bitmap);
bitcnt = 0;
}
}
ucg_com_SetCSLineStatus(ucg, 1); /* disable chip */
return 1;
}
ucg_int_t ICACHE_FLASH_ATTR ucg_handle_ili9163_l90fx(ucg_t *ucg)
{
uint8_t c[3];
ucg_int_t tmp;
if ( ucg_clip_l90fx(ucg) != 0 )
{
switch(ucg->arg.dir)
{
case 0:
ucg->arg.pixel.pos.y += 32;
ucg_com_SendCmdSeq(ucg, ucg_ili9163_set_pos_dir0_seq);
ucg->arg.pixel.pos.y -= 32;
break;
case 1:
ucg->arg.pixel.pos.y += 32;
ucg_com_SendCmdSeq(ucg, ucg_ili9163_set_pos_dir1_seq);
ucg->arg.pixel.pos.y -= 32;
break;
case 2:
tmp = ucg->arg.pixel.pos.x;
ucg->arg.pixel.pos.x = 127-tmp;
ucg->arg.pixel.pos.y += 32;
ucg_com_SendCmdSeq(ucg, ucg_ili9163_set_pos_dir2_seq);
ucg->arg.pixel.pos.y -= 32;
ucg->arg.pixel.pos.x = tmp;
break;
case 3:
default:
tmp = ucg->arg.pixel.pos.y;
ucg->arg.pixel.pos.y = 127-tmp;
//ucg->arg.pixel.pos.y += 32;
ucg_com_SendCmdSeq(ucg, ucg_ili9163_set_pos_dir3_seq);
ucg->arg.pixel.pos.y = tmp;
break;
}
c[0] = ucg->arg.pixel.rgb.color[0];
c[1] = ucg->arg.pixel.rgb.color[1];
c[2] = ucg->arg.pixel.rgb.color[2];
ucg_com_SendRepeat3Bytes(ucg, ucg->arg.len, c);
ucg_com_SetCSLineStatus(ucg, 1); /* disable chip */
return 1;
}
return 0;
}
static ucg_int_t ucg_handle_ld50t6160_l90fx(ucg_t *ucg)
{
uint8_t c[3];
//ucg_int_t tmp;
if ( ucg_clip_l90fx(ucg) != 0 )
{
switch(ucg->arg.dir)
{
case 0:
ucg_com_SendCmdSeq(ucg, ucg_ld50t6160_set_pos_dir0_seq);
break;
case 1:
ucg_com_SendCmdSeq(ucg, ucg_ld50t6160_set_pos_dir1_seq);
break;
case 2:
//tmp = ucg->arg.pixel.pos.x;
//ucg->arg.pixel.pos.x = 127-tmp;
ucg_com_SendCmdSeq(ucg, ucg_ld50t6160_set_pos_dir2_seq);
//ucg->arg.pixel.pos.x = tmp;
break;
case 3:
default:
//tmp = ucg->arg.pixel.pos.y;
//ucg->arg.pixel.pos.y = 159-tmp;
ucg_com_SendCmdSeq(ucg, ucg_ld50t6160_set_pos_dir3_seq);
//ucg->arg.pixel.pos.y = tmp;
break;
}
c[0] = ucg->arg.pixel.rgb.color[0]>>2;
c[1] = ucg->arg.pixel.rgb.color[1]>>2;
c[2] = ucg->arg.pixel.rgb.color[2]>>2;
ucg_com_SendRepeat3Bytes(ucg, ucg->arg.len, c);
ucg_com_SetCSLineStatus(ucg, 1); /* disable chip */
return 1;
}
return 0;
}
ucg_int_t ICACHE_FLASH_ATTR ucg_dev_pcf8833_16x132x132(ucg_t *ucg, ucg_int_t msg, void *data)
{
switch(msg)
{
case UCG_MSG_DEV_POWER_UP:
/* 1. Call to the controller procedures to setup the com interface */
if ( ucg_dev_ic_pcf8833_16(ucg, msg, data) == 0 )
return 0;
/* 2. Send specific init sequence for this display module */
ucg_com_SendCmdSeq(ucg, ucg_tft_132x132_pcf8833_init_seq);
return 1;
case UCG_MSG_DEV_POWER_DOWN:
/* let do power down by the conroller procedures */
return ucg_dev_ic_pcf8833_16(ucg, msg, data);
}
/* all other messages are handled by the controller procedures */
return ucg_dev_ic_pcf8833_16(ucg, msg, data);
}
/* with CmdDataSequence */
ucg_int_t ICACHE_FLASH_ATTR ucg_handle_st7735_l90tc(ucg_t *ucg)
{
if ( ucg_clip_l90tc(ucg) != 0 )
{
uint8_t buf[16];
ucg_int_t dx, dy;
ucg_int_t i;
unsigned char pixmap;
uint8_t bitcnt;
ucg_com_SetCSLineStatus(ucg, 0); /* enable chip */
ucg_com_SendCmdSeq(ucg, ucg_st7735_set_pos_seq);
buf[0] = 0x001; // change to 0 (cmd mode)
buf[1] = 0x02a; // set x
buf[2] = 0x002; // change to 1 (arg mode)
buf[3] = 0x000; // upper part x
buf[4] = 0x000; // no change
buf[5] = 0x000; // will be overwritten by x value
buf[6] = 0x001; // change to 0 (cmd mode)
buf[7] = 0x02c; // write data
buf[8] = 0x002; // change to 1 (data mode)
buf[9] = 0x000; // red value
buf[10] = 0x000; // no change
buf[11] = 0x000; // green value
buf[12] = 0x000; // no change
buf[13] = 0x000; // blue value
switch(ucg->arg.dir)
{
case 0:
dx = 1; dy = 0;
buf[1] = 0x02a; // set x
break;
case 1:
dx = 0; dy = 1;
buf[1] = 0x02b; // set y
break;
case 2:
dx = -1; dy = 0;
buf[1] = 0x02a; // set x
break;
case 3:
default:
dx = 0; dy = -1;
buf[1] = 0x02b; // set y
break;
}
pixmap = ucg_pgm_read(ucg->arg.bitmap);
bitcnt = ucg->arg.pixel_skip;
pixmap <<= bitcnt;
buf[9] = ucg->arg.pixel.rgb.color[0];
buf[11] = ucg->arg.pixel.rgb.color[1];
buf[13] = ucg->arg.pixel.rgb.color[2];
//ucg_com_SetCSLineStatus(ucg, 0); /* enable chip */
for( i = 0; i < ucg->arg.len; i++ )
{
if ( (pixmap & 128) != 0 )
{
if ( (ucg->arg.dir&1) == 0 )
{
buf[5] = ucg->arg.pixel.pos.x;
}
else
{
buf[3] = ucg->arg.pixel.pos.y>>8;
buf[5] = ucg->arg.pixel.pos.y&255;
}
ucg_com_SendCmdDataSequence(ucg, 7, buf, 0);
}
pixmap<<=1;
ucg->arg.pixel.pos.x+=dx;
ucg->arg.pixel.pos.y+=dy;
bitcnt++;
if ( bitcnt >= 8 )
{
ucg->arg.bitmap++;
pixmap = ucg_pgm_read(ucg->arg.bitmap);
bitcnt = 0;
}
}
ucg_com_SetCSLineStatus(ucg, 1); /* disable chip */
return 1;
}
ucg_int_t ucg_dev_seps225_16x128x128_univision(ucg_t *ucg, ucg_int_t msg, void *data)
{
switch(msg)
{
case UCG_MSG_DEV_POWER_UP:
/* 1. Call to the controller procedures to setup the com interface */
if ( ucg_dev_ic_seps225_16(ucg, msg, data) == 0 )
return 0;
/* 2. Send specific init sequence for this display module */
ucg_com_SendCmdSeq(ucg, ucg_univision_seps225_init_seq);
/* demonstration of the OLED error */
/*
{
uint8_t r,g,b, i;
uint8_t c[3];
ucg_com_SendCmdSeq(ucg, ucg_seps255_pos_dir0_seq);
r = 0;
g = 0;
b = 80;
c[0] = (r&0x0f8) | (((g) >>5));
c[1] = ((((g))<<3)&0x0e0) | (((b) >>3));
ucg_com_SendRepeat2Bytes(ucg, 128, c);
r = 0;
g = 0;
b = 0;
c[0] = (r&0x0f8) | (((g) >>5));
c[1] = ((((g))<<3)&0x0e0) | (((b) >>3));
for( i = 0; i < 126; i++ )
{
ucg_com_SendRepeat2Bytes(ucg, 128, c);
}
r = 0;
g = 0;
b = 255;
c[0] = (r&0x0f8) | (((g) >>5));
c[1] = ((((g))<<3)&0x0e0) | (((b) >>3));
ucg_com_SendRepeat2Bytes(ucg, 40, c);
for(;;)
;
}
*/
return 1;
case UCG_MSG_DEV_POWER_DOWN:
/* let do power down by the controller procedures */
return ucg_dev_ic_seps225_16(ucg, msg, data);
case UCG_MSG_GET_DIMENSION:
((ucg_wh_t *)data)->w = 128;
((ucg_wh_t *)data)->h = 128;
return 1;
}
/* all other messages are handled by the controller procedures */
return ucg_dev_ic_seps225_16(ucg, msg, data);
}
