void cshell_icc_open(void)
{
ICC_CHAN_ATTR_S attr;
UDI_OPEN_PARAM cshell_icc_param;
UDI_HANDLE cshell_udi_handle = UDI_INVALID_HANDLE;
if (1 == g_usb_cshell_disabled) {
printk("%s : usb cshell disabled\n", __FUNCTION__);
return ;
}
attr.enChanMode = ICC_CHAN_MODE_STREAM;
attr.u32Priority = 255;
attr.u32TimeOut = 1000;
attr.event_cb = cshell_event_cb;
attr.read_cb = cshell_read_cb;
attr.write_cb = cshell_write_cb;
attr.u32FIFOInSize = 8192;
attr.u32FIFOOutSize = 8192;
cshell_icc_param.devid = (UDI_DEVICE_ID)UDI_BUILD_DEV_ID(UDI_DEV_ICC, 31);
cshell_icc_param.pPrivate = &attr;
cshell_udi_handle = udi_open(&cshell_icc_param);
if(cshell_udi_handle <= 0)
{
printk("cshell_icc_open fail,cshell_udi_handle is %d \n",cshell_udi_handle);
g_cshell_udi_handle = -1;
}
else
{
printk("cshell_icc_open success,cshell_udi_handle is %d \n",cshell_udi_handle);
g_cshell_udi_handle = cshell_udi_handle;
}
}
VOS_UINT32 dms_NcmCfg(VOS_VOID)
{
VOS_UINT32 ret = ERR_MSP_SUCCESS;
BSP_S32 slNcmHandle ;
DMS_PHY_BEAR_PROPERTY_STRU *pstComCfg =NULL;
UDI_OPEN_PARAM stParam ;
pstComCfg = dmsgetPhyBearProperty();
if(pstComCfg[EN_DMS_BEARER_USB_NCM].slPortHandle != UDI_INVALID_HANDLE)
{
return ERR_MSP_SUCCESS;
}
stParam.devid = UDI_NCM_CTRL_ID;
slNcmHandle = udi_open(&stParam);
if(slNcmHandle ==UDI_INVALID_HANDLE)
{
ret = ERR_MSP_FAILURE;
}
else
{
pstComCfg[EN_DMS_BEARER_USB_NCM].slPortHandle = slNcmHandle;
ret = (VOS_UINT32)udi_ioctl (slNcmHandle , NCM_IOCTL_REG_NDIS_RESP_STATUS_FUNC, dms_AtNdisWrtCB);
ret = ERR_MSP_SUCCESS;
}
/*配置 NDIS CTRL 通道*/
Dms_NcmProcCbReg(g_atConnectBrk,(USB_NAS_AT_CMD_RECV)g_atCmdRcv);
return ret;
}
/*****************************************************************************
函 数 名 : diag_PortOpen
功能描述 :
输入参数 :
输出参数 :
返 回 值 :
调用函数 :
被调函数 :
修改历史 :
1.日 期 : 2012年8月27日
修改内容 : Creat Function
*****************************************************************************/
VOS_UINT32 diag_PortOpen(DIAG_PORT_PHY_BEAR_ENUM enPort,UDI_DEVICE_ID devid,\
VOS_VOID * pEvtCB,VOS_VOID* pWrtCB,VOS_VOID* pRdCB)
{
UDI_HANDLE slUartHd = 0;
VOS_UINT32 ret = ERR_MSP_SUCCESS;
UDI_OPEN_PARAM stParam = {0};
ACM_READ_BUFF_INFO stReadParam;
if(DIAG_PORT_GET_HANDLE(enPort) != UDI_INVALID_HANDLE)
{
return ERR_MSP_SUCCESS;
}
DIAG_DEBUG_SDM_FUN(EN_DIAG_DEBUG_TCP_OPEN+enPort, 0, 0, 0);
stParam.devid = devid;
slUartHd = udi_open(&stParam);
if(UDI_INVALID_HANDLE == slUartHd)
{
return ERR_MSP_FAILURE;
}
stReadParam.u32BuffSize = DIAG_DATA_READ_BUFFER_SIZE;
stReadParam.u32BuffNum = DIAG_DATA_MAX_BUFFER_COUNT;
ret = udi_ioctl(slUartHd,ACM_IOCTL_RELLOC_READ_BUFF,&stReadParam);
if(ret)
{
DIAG_DEBUG_SDM_FUN(EN_DIAG_DEBUG_TCP_OPEN_ERR+enPort, (VOS_UINT32)slUartHd, ret, 1);
goto ERR_OUT;
}
ret = udi_ioctl(slUartHd,ACM_IOCTL_SEND_BUFF_CAN_DMA,&stReadParam);
if(ret)
{
DIAG_DEBUG_SDM_FUN(EN_DIAG_DEBUG_TCP_OPEN_ERR+enPort, (VOS_UINT32)slUartHd, ret, 2);
goto ERR_OUT;
}
ret = udi_ioctl((int)slUartHd,ACM_IOCTL_SET_READ_CB, pRdCB);
if(ret)
{
DIAG_DEBUG_SDM_FUN(EN_DIAG_DEBUG_TCP_OPEN_ERR+enPort, (VOS_UINT32)slUartHd, ret, 3);
goto ERR_OUT;
}
ret = udi_ioctl((int)slUartHd,ACM_IOCTL_SET_WRITE_CB, pWrtCB);
if(ret)
{
DIAG_DEBUG_SDM_FUN(EN_DIAG_DEBUG_TCP_OPEN_ERR+enPort, (VOS_UINT32)slUartHd, ret, 4);
goto ERR_OUT;
}
ret = udi_ioctl((int)slUartHd, (int)ACM_IOCTL_SET_EVT_CB, pEvtCB);
if(ret)
{
DIAG_DEBUG_SDM_FUN(EN_DIAG_DEBUG_TCP_OPEN_ERR+enPort, (VOS_UINT32)slUartHd, ret, 5);
goto ERR_OUT;
}
ret = udi_ioctl((int)slUartHd, (int)ACM_IOCTL_WRITE_DO_COPY, 0);
if(ret)
{
DIAG_DEBUG_SDM_FUN(EN_DIAG_DEBUG_TCP_OPEN_ERR+enPort, (VOS_UINT32)slUartHd, ret, 6);
goto ERR_OUT;
}
g_diagPort_ctrl.bFlag = VOS_TRUE;
DIAG_PORT_HANDLE_SWITCH(enPort,slUartHd); /*修改端口句柄*/
DIAG_PORT_CHAN_STATE_SWITCH(enPort,ACM_EVT_DEV_READY);/*打开之后修改端口状态*/
return ERR_MSP_SUCCESS;
ERR_OUT:
udi_close(slUartHd);
return ret;
}
