static void sig_dialog(void)
{
const char *label = pdf_field_label(ctx, sig_widget->obj);
ui_dialog_begin(400, (ui.gridsize+4)*3 + ui.lineheight*10);
{
ui_layout(T, X, NW, 2, 2);
ui_label("%s", label);
ui_spacer();
if (sig_result)
ui_label("Signature is valid.\n%s", sig_status);
else
ui_label("Could not verify signature:\n%s", sig_status);
ui_layout(B, X, NW, 2, 2);
ui_panel_begin(0, ui.gridsize, 0, 0, 0);
{
ui_layout(R, NONE, S, 0, 0);
if (ui_button("Cancel") || (!ui.focus && ui.key == KEY_ESCAPE))
ui.dialog = NULL;
ui_spacer();
if (ui_button("Sign"))
{
fz_strlcpy(cert_filename, filename, sizeof cert_filename);
ui_init_open_file(".", cert_file_filter);
ui.dialog = cert_file_dialog;
}
}
ui_panel_end();
}
ui_dialog_end();
}
static void tx_dialog(void)
{
int ff = pdf_field_flags(ctx, tx_widget->obj);
const char *label = pdf_field_label(ctx, tx_widget->obj);
int tx_h = (ff & PDF_TX_FIELD_IS_MULTILINE) ? 10 : 1;
int lbl_h = ui_break_lines((char*)label, NULL, 20, 394, NULL);
int is;
ui_dialog_begin(400, (ui.gridsize+4)*3 + ui.lineheight*(tx_h+lbl_h-2));
{
ui_layout(T, X, NW, 2, 2);
ui_label("%s", label);
is = ui_input(&tx_input, 200, tx_h);
ui_layout(B, X, NW, 2, 2);
ui_panel_begin(0, ui.gridsize, 0, 0, 0);
{
ui_layout(R, NONE, S, 0, 0);
if (ui_button("Cancel") || (!ui.focus && ui.key == KEY_ESCAPE))
ui.dialog = NULL;
ui_spacer();
if (ui_button("Okay") || is == UI_INPUT_ACCEPT)
{
pdf_set_text_field_value(ctx, tx_widget, tx_input.text);
if (pdf_update_page(ctx, tx_widget->page))
render_page();
ui.dialog = NULL;
}
}
ui_panel_end();
}
ui_dialog_end();
}
static void cert_password_dialog(void)
{
int is;
ui_dialog_begin(400, (ui.gridsize+4)*3);
{
ui_layout(T, X, NW, 2, 2);
ui_label("Password:"******"Cancel"))
ui.dialog = NULL;
ui_spacer();
if (ui_button("Okay") || is == UI_INPUT_ACCEPT)
{
ui.dialog = NULL;
do_sign();
}
}
ui_panel_end();
}
ui_dialog_end();
}
/*! \brief Main function. Execution starts here.
*/
int main(void)
{
//Initialize interrupt controller
irq_initialize_vectors();
cpu_irq_enable();
// Initialize sleep manager
sleepmgr_init();
// Initialize clock tree
sysclk_init();
// Initialize hardware board resources
board_init();
// Initialize user interface
ui_init();
ui_powerdown();
// Sanity check about Silicon revision Vs Firmware build
// for Silicon revision A, firmware should be specific
if ((!firmware_rev_a) && (nvm_read_device_rev()==0)) {
ui_si_revision_error();
while(ui_button()!=1);
while(ui_button()!=2);
while(ui_button()!=4);
while(ui_button()!=8);
}
// Initialize DATA Flash
at45dbx_init();
// Initialize ADC for on-board sensors
adc_sensors_init();
// Initialize USB HID report protocol
usb_hid_com_init();
// Start USB stack
main_build_usb_serial_number();
udc_start();
// The main loop manages only the power mode
// because everything else is managed by interrupt.
// The USB Start of Frame event manages internal tick events for
// on-board sensor updates as well as LCD display update.
while (true) {
if (main_b_msc_enable) {
if (!udi_msc_process_trans()) {
sleepmgr_enter_sleep();
}
} else {
sleepmgr_enter_sleep();
}
if (usb_hid_com_is_start_dfu()) {
main_start_dfu_session();
}
}
}
static void ch_dialog(void)
{
const char *label;
const char *value;
const char **options;
int n, choice;
int label_h;
label = pdf_field_label(ctx, ch_widget->obj);
label_h = ui_break_lines((char*)label, NULL, 20, 394, NULL);
n = pdf_choice_widget_options(ctx, ch_widget->page->doc, ch_widget, 0, NULL);
options = fz_malloc_array(ctx, n, sizeof(char*));
pdf_choice_widget_options(ctx, ch_widget->page->doc, ch_widget, 0, options);
value = pdf_field_value(ctx, ch_widget->obj);
ui_dialog_begin(400, (ui.gridsize+4)*3 + ui.lineheight*(label_h-1));
{
ui_layout(T, X, NW, 2, 2);
ui_label("%s", label);
choice = ui_select("Widget/Ch", value, options, n);
if (choice >= 0)
pdf_set_choice_field_value(ctx, ch_widget, options[choice]);
ui_layout(B, X, NW, 2, 2);
ui_panel_begin(0, ui.gridsize, 0, 0, 0);
{
ui_layout(R, NONE, S, 0, 0);
if (ui_button("Cancel") || (!ui.focus && ui.key == KEY_ESCAPE))
ui.dialog = NULL;
ui_spacer();
if (ui_button("Okay"))
{
if (pdf_update_page(ctx, ch_widget->page))
render_page();
ui.dialog = NULL;
}
}
ui_panel_end();
}
ui_dialog_end();
fz_free(ctx, options);
}
void g::menu_level::init_buttons()
{
this->delta = 0.0;
this->current = 0.0;
this->direction = 0;
if(this->levpackmenu)
{
this->buttons.clear();
for(size_t i = 0; i < this->levels.size(); i++)
this->buttons.push_back(ui_button());
}
else
{
this->buttons.clear();
this->current_pack = this->lev_selected();
for(size_t i = 0; i < this->levels[this->current_pack].size(); i++)
this->buttons.push_back(ui_button());
}
this->update_button_positions(program_exe::get_instance().glfw->opengl);
}
void usb_hid_com_send_report_in(void)
{
// Fill HID report fields
report_to_send.light = adc_sensor_get_light();
report_to_send.temperature = adc_sensor_get_temperature();
report_to_send.ext_voltage = adc_sensor_get_ext_voltage();
report_to_send.potentiometer = adc_sensor_get_potentiometer();
report_to_send.buttons = ui_button();
report_to_send.sensor_selected = main_get_sensor_selected();
// Send HID report in background
udi_hid_generic_send_report_in((uint8_t*)&report_to_send);
}
void main_sof_action(void)
{
static bool btn_last_state = 0;
bool btn_state = ui_button();
if (!main_b_generic_enable)
return;
ui_process(udd_get_frame_number());
if(btn_state!=btn_last_state) {
report_to_send[0]=btn_state;
udi_hid_generic_send_report_in(report_to_send);
}
btn_last_state=btn_state;
}
void main_sof_action(void)
{
// LCD strings for on-board sensors
static uint8_t lcd_txt_light[LCD_TEXT_STRING_SIZE + 2 * LCD_TEST_DISPLAY_SIZE]
= "LIGHT SENSOR ";
static uint8_t lcd_txt_ntc[LCD_TEXT_STRING_SIZE + 2 * LCD_TEST_DISPLAY_SIZE]
= "TEMPERATURE SENSOR ";
static uint8_t lcd_txt_pot[LCD_TEXT_STRING_SIZE + 2 * LCD_TEST_DISPLAY_SIZE]
= "POTENTIOMETER INPUT ";
static uint8_t lcd_txt_ext_v[LCD_TEXT_STRING_SIZE + 2 * LCD_TEST_DISPLAY_SIZE]
= "EXTERNAL VOLTAGE ";
static uint8_t old_button;
if (main_timeout_user_message) {
// Currently LCD is busy displaying user message from USB
// Wait end of timeout to display again sensor message
if (--main_timeout_user_message == 0) {
switch (main_sensor_selected) {
case LIGHT_SENSOR:
ui_display_text(lcd_txt_light,
sizeof(lcd_txt_light));
break;
case TEMPERATURE_SENSOR:
ui_display_text(lcd_txt_ntc,
sizeof(lcd_txt_ntc));
break;
case POTENTIOMETER_SENSOR:
ui_display_text(lcd_txt_pot,
sizeof(lcd_txt_pot));
break;
case EXT_VOLTAGE_INPUT:
ui_display_text(lcd_txt_ext_v,
sizeof(lcd_txt_ext_v));
default:
break;
}
}
}
// Change LOCAL text display when a button is pressed...
if (old_button!=ui_button()) {
old_button=ui_button();
if (ui_pusb_button_0()) {
ui_display_text(lcd_txt_light, sizeof(lcd_txt_light));
main_sensor_selected = LIGHT_SENSOR;
}
if (ui_pusb_button_1()) {
ui_display_text(lcd_txt_ntc, sizeof(lcd_txt_ntc));
main_sensor_selected = TEMPERATURE_SENSOR;
}
if (ui_pusb_button_2()) {
ui_display_text(lcd_txt_pot, sizeof(lcd_txt_pot));
main_sensor_selected = POTENTIOMETER_SENSOR;
}
if (ui_pusb_button_3()) {
ui_display_text(lcd_txt_ext_v, sizeof(lcd_txt_ext_v));
main_sensor_selected = EXT_VOLTAGE_INPUT;
}
// If hid generic interface is not up and running, do nothing
if (!main_b_generic_enable) {
return;
}
}
// Prepare new report each HID_SEND_REPORT_MS ms
if ((udd_get_frame_number() % HID_SEND_REPORT_MS) == 0) {
usb_hid_com_send_report_in();
}
// Prepare new ADC samples each ADC_NEW_SAMPLE_MS ms
if ((udd_get_frame_number() % ADC_NEW_SAMPLE_MS) == 0) {
adc_sensors_start_conversions();
}
// Each LCD_SCROLLING_MS ms Performs LCD scrolling
if ((udd_get_frame_number() % LCD_SCROLLING_MS) == 0) {
ui_scroll_text();
}
// Refresh on-board sensors LCD display
// each LCD_SENSOR_MS and if no user message is displayed
if (((udd_get_frame_number() % LCD_SENSOR_MS) == 0)
&& (main_timeout_user_message == 0)) {
switch (main_sensor_selected) {
case LIGHT_SENSOR:
ui_display_sensor(adc_sensor_get_light(),
UI_UNIT_NONE);
break;
case TEMPERATURE_SENSOR:
ui_display_sensor(adc_sensor_get_temperature(),
UI_UNIT_DEGREE_C);
break;
case POTENTIOMETER_SENSOR:
ui_display_sensor(adc_sensor_get_potentiometer(),
UI_UNIT_MILIVOLT);
break;
case EXT_VOLTAGE_INPUT:
ui_display_sensor(adc_sensor_get_ext_voltage(),
UI_UNIT_MILIVOLT);
default:
break;
}
}
}
int ui_save_file(char filename[PATH_MAX], void (*extra_panel)(void))
{
int i, rv = 0;
ui_panel_begin(0, 0, 4, 4, 1);
{
ui_layout(L, Y, NW, 0, 0);
ui_panel_begin(150, 0, 0, 0, 0);
{
ui_layout(T, X, NW, 2, 2);
list_drives();
if (extra_panel)
{
ui_spacer();
extra_panel();
}
ui_layout(B, X, NW, 2, 2);
if (ui_button("Cancel") || (!ui.focus && ui.key == KEY_ESCAPE))
{
filename[0] = 0;
rv = 1;
}
}
ui_panel_end();
ui_layout(T, X, NW, 2, 2);
if (ui_input(&fc.input_dir, 0, 1) == UI_INPUT_ACCEPT)
load_dir(fc.input_dir.text);
ui_layout(T, X, NW, 2, 2);
ui_panel_begin(0, ui.gridsize, 0, 0, 0);
{
ui_layout(R, NONE, CENTER, 0, 0);
if (ui_button("Save"))
{
fz_snprintf(filename, PATH_MAX, "%s/%s", fc.curdir, fc.input_file.text);
rv = 1;
}
ui_spacer();
if (ui_button("\xe2\x9e\x95")) /* U+2795 HEAVY PLUS */
bump_file_version(1);
if (ui_button("\xe2\x9e\x96")) /* U+2796 HEAVY MINUS */
bump_file_version(-1);
ui_spacer();
ui_layout(ALL, X, CENTER, 0, 0);
ui_input(&fc.input_file, 0, 1);
}
ui_panel_end();
ui_layout(ALL, BOTH, NW, 2, 2);
ui_list_begin(&fc.list_dir, fc.count, 0, 0);
for (i = 0; i < fc.count; ++i)
{
const char *name = fc.files[i].name;
char buf[PATH_MAX];
if (fc.files[i].is_dir)
fz_snprintf(buf, sizeof buf, "\xf0\x9f\x93\x81 %s", name);
else
fz_snprintf(buf, sizeof buf, "\xf0\x9f\x93\x84 %s", name);
if (ui_list_item(&fc.list_dir, &fc.files[i], buf, i==fc.selected))
{
fc.selected = i;
if (fc.files[i].is_dir)
{
fz_snprintf(buf, sizeof buf, "%s/%s", fc.curdir, name);
load_dir(buf);
ui.active = NULL;
}
else
{
ui_input_init(&fc.input_file, name);
}
}
}
ui_list_end(&fc.list_dir);
}
ui_panel_end();
return rv;
}
int ui_open_file(char filename[PATH_MAX])
{
static int last_click_time = 0;
static int last_click_sel = -1;
int i, rv = 0;
ui_panel_begin(0, 0, 4, 4, 1);
{
ui_layout(L, Y, NW, 0, 0);
ui_panel_begin(150, 0, 0, 0, 0);
{
ui_layout(T, X, NW, 2, 2);
list_drives();
ui_layout(B, X, NW, 2, 2);
if (ui_button("Cancel") || (!ui.focus && ui.key == KEY_ESCAPE))
{
filename[0] = 0;
rv = 1;
}
}
ui_panel_end();
ui_layout(T, X, NW, 2, 2);
ui_panel_begin(0, ui.gridsize, 0, 0, 0);
{
if (fc.selected >= 0)
{
ui_layout(R, NONE, CENTER, 0, 0);
if (ui_button("Open") || (!ui.focus && ui.key == KEY_ENTER))
{
fz_snprintf(filename, PATH_MAX, "%s/%s", fc.curdir, fc.files[fc.selected].name);
rv = 1;
}
ui_spacer();
}
ui_layout(ALL, X, CENTER, 0, 0);
if (ui_input(&fc.input_dir, 0, 1) == UI_INPUT_ACCEPT)
load_dir(fc.input_dir.text);
}
ui_panel_end();
ui_layout(ALL, BOTH, NW, 2, 2);
ui_list_begin(&fc.list_dir, fc.count, 0, 0);
for (i = 0; i < fc.count; ++i)
{
const char *name = fc.files[i].name;
char buf[PATH_MAX];
if (fc.files[i].is_dir)
fz_snprintf(buf, sizeof buf, "%C %s", ICON_FOLDER, name);
else
fz_snprintf(buf, sizeof buf, "%C %s", ICON_DOCUMENT, name);
if (ui_list_item(&fc.list_dir, &fc.files[i], buf, i==fc.selected))
{
fc.selected = i;
if (fc.files[i].is_dir)
{
fz_snprintf(buf, sizeof buf, "%s/%s", fc.curdir, name);
load_dir(buf);
ui.active = NULL;
last_click_sel = -1;
}
else
{
int click_time = glutGet(GLUT_ELAPSED_TIME);
if (i == last_click_sel && click_time < last_click_time + 250)
{
fz_snprintf(filename, PATH_MAX, "%s/%s", fc.curdir, name);
rv = 1;
}
last_click_time = click_time;
last_click_sel = i;
}
}
}
ui_list_end(&fc.list_dir);
}
ui_panel_end();
return rv;
}
