static int vc4_v3d_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *drm = dev_get_drvdata(master);
struct vc4_dev *vc4 = to_vc4_dev(drm);
struct vc4_v3d *v3d = NULL;
int ret;
v3d = devm_kzalloc(&pdev->dev, sizeof(*v3d), GFP_KERNEL);
if (!v3d)
return -ENOMEM;
dev_set_drvdata(dev, v3d);
v3d->pdev = pdev;
v3d->regs = vc4_ioremap_regs(pdev, 0);
if (IS_ERR(v3d->regs))
return PTR_ERR(v3d->regs);
vc4->v3d = v3d;
v3d->vc4 = vc4;
if (V3D_READ(V3D_IDENT0) != V3D_EXPECTED_IDENT0) {
DRM_ERROR("V3D_IDENT0 read 0x%08x instead of 0x%08x\n",
V3D_READ(V3D_IDENT0), V3D_EXPECTED_IDENT0);
return -EINVAL;
}
/* Reset the binner overflow address/size at setup, to be sure
* we don't reuse an old one.
*/
V3D_WRITE(V3D_BPOA, 0);
V3D_WRITE(V3D_BPOS, 0);
vc4_v3d_init_hw(drm);
ret = drm_irq_install(drm, platform_get_irq(pdev, 0));
if (ret) {
DRM_ERROR("Failed to install IRQ handler\n");
return ret;
}
pm_runtime_enable(dev);
return 0;
}
static int vc4_hvs_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *drm = dev_get_drvdata(master);
struct vc4_dev *vc4 = drm->dev_private;
struct vc4_hvs *hvs = NULL;
hvs = devm_kzalloc(&pdev->dev, sizeof(*hvs), GFP_KERNEL);
if (!hvs)
return -ENOMEM;
hvs->pdev = pdev;
hvs->regs = vc4_ioremap_regs(pdev, 0);
if (IS_ERR(hvs->regs))
return PTR_ERR(hvs->regs);
hvs->dlist = hvs->regs + SCALER_DLIST_START;
vc4->hvs = hvs;
return 0;
}
static int vc4_v3d_bind(struct device *dev, struct device *master, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *drm = dev_get_drvdata(master);
struct vc4_dev *vc4 = to_vc4_dev(drm);
struct vc4_v3d *v3d = NULL;
int ret;
v3d = devm_kzalloc(&pdev->dev, sizeof(*v3d), GFP_KERNEL);
if (!v3d)
return -ENOMEM;
dev_set_drvdata(dev, v3d);
v3d->pdev = pdev;
v3d->regs = vc4_ioremap_regs(pdev, 0);
if (IS_ERR(v3d->regs))
return PTR_ERR(v3d->regs);
vc4->v3d = v3d;
v3d->vc4 = vc4;
v3d->clk = devm_clk_get(dev, NULL);
if (IS_ERR(v3d->clk)) {
int ret = PTR_ERR(v3d->clk);
if (ret == -ENOENT) {
/* bcm2835 didn't have a clock reference in the DT. */
ret = 0;
v3d->clk = NULL;
} else {
if (ret != -EPROBE_DEFER)
dev_err(dev, "Failed to get V3D clock: %d\n",
ret);
return ret;
}
}
if (V3D_READ(V3D_IDENT0) != V3D_EXPECTED_IDENT0) {
DRM_ERROR("V3D_IDENT0 read 0x%08x instead of 0x%08x\n",
V3D_READ(V3D_IDENT0), V3D_EXPECTED_IDENT0);
return -EINVAL;
}
ret = clk_prepare_enable(v3d->clk);
if (ret != 0)
return ret;
ret = vc4_allocate_bin_bo(drm);
if (ret) {
clk_disable_unprepare(v3d->clk);
return ret;
}
/* Reset the binner overflow address/size at setup, to be sure
* we don't reuse an old one.
*/
V3D_WRITE(V3D_BPOA, 0);
V3D_WRITE(V3D_BPOS, 0);
vc4_v3d_init_hw(drm);
ret = drm_irq_install(drm, platform_get_irq(pdev, 0));
if (ret) {
DRM_ERROR("Failed to install IRQ handler\n");
return ret;
}
pm_runtime_set_active(dev);
pm_runtime_use_autosuspend(dev);
pm_runtime_set_autosuspend_delay(dev, 40); /* a little over 2 frames. */
pm_runtime_enable(dev);
return 0;
}