void crvision_pal_state::pal(machine_config &config)
{
creativision(config);
// video hardware
tms9929_device &vdp(TMS9929(config, TMS9929_TAG, XTAL(10'738'635)));
vdp.set_screen("screen");
vdp.set_vram_size(0x4000);
vdp.int_callback().set_inputline(M6502_TAG, m6502_device::IRQ_LINE);
SCREEN(config, "screen", SCREEN_TYPE_RASTER);
}
void laser2001_state::lasr2001(machine_config &config)
{
// basic machine hardware
M6502(config, m_maincpu, XTAL(17'734'470)/9);
m_maincpu->set_addrmap(AS_PROGRAM, &laser2001_state::lasr2001_map);
// devices
PIA6821(config, m_pia, 0);
m_pia->readpa_handler().set(FUNC(laser2001_state::pia_pa_r));
m_pia->readpb_handler().set(FUNC(laser2001_state::pia_pb_r));
m_pia->readca1_handler().set(FUNC(laser2001_state::pia_ca1_r));
m_pia->writepa_handler().set(FUNC(laser2001_state::pia_pa_w));
m_pia->writepb_handler().set(FUNC(laser2001_state::pia_pb_w));
m_pia->ca2_handler().set(FUNC(laser2001_state::pia_ca2_w));
m_pia->cb2_handler().set(FUNC(laser2001_state::pia_cb2_w));
CASSETTE(config, m_cassette);
m_cassette->set_default_state((cassette_state)(CASSETTE_STOPPED | CASSETTE_MOTOR_ENABLED | CASSETTE_SPEAKER_ENABLED));
CENTRONICS(config, m_centronics, centronics_devices, "printer");
m_centronics->busy_handler().set(FUNC(laser2001_state::write_centronics_busy));
OUTPUT_LATCH(config, m_cent_data_out);
m_centronics->set_output_latch(*m_cent_data_out);
// video hardware
tms9929a_device &vdp(TMS9929A(config, TMS9929_TAG, XTAL(10'738'635)));
vdp.set_screen("screen");
vdp.set_vram_size(0x4000);
vdp.int_callback().set_inputline(M6502_TAG, m6502_device::IRQ_LINE);
SCREEN(config, "screen", SCREEN_TYPE_RASTER);
// sound hardware
SPEAKER(config, "mono").front_center();
SN76489A(config, m_psg, XTAL(17'734'470)/9);
m_psg->ready_cb().set(FUNC(laser2001_state::write_psg_ready));
m_psg->add_route(ALL_OUTPUTS, "mono", 1.00);
WAVE(config, "wave", m_cassette).add_route(1, "mono", 0.25);
// cartridge
CRVISION_CART_SLOT(config, m_cart, crvision_cart, nullptr);
// internal ram
RAM(config, m_ram);
m_ram->set_default_size("16K");
m_ram->set_extra_options("32K");
// software list
SOFTWARE_LIST(config, "cart_list").set_original("crvision");
SOFTWARE_LIST(config, "cart_list2").set_original("laser2001_cart");
}
void tm990189_state::tm990_189_v(machine_config &config)
{
/* basic machine hardware */
TMS9980A(config, m_tms9980a, 8_MHz_XTAL);
m_tms9980a->set_addrmap(AS_PROGRAM, &tm990189_state::tm990_189_v_memmap);
m_tms9980a->set_addrmap(AS_IO, &tm990189_state::tm990_189_cru_map);
m_tms9980a->extop_cb().set(FUNC(tm990189_state::external_operation));
MCFG_MACHINE_START_OVERRIDE(tm990189_state, tm990_189_v )
MCFG_MACHINE_RESET_OVERRIDE(tm990189_state, tm990_189_v )
/* video hardware */
tms9918_device &vdp(TMS9918(config, "tms9918", XTAL(10'738'635)));
vdp.set_screen("screen");
vdp.set_vram_size(0x4000);
SCREEN(config, "screen", SCREEN_TYPE_RASTER);
config.set_default_layout(layout_tm990189v);
/* sound hardware */
SPEAKER(config, "mono").front_center();
SPEAKER_SOUND(config, "speaker").add_route(ALL_OUTPUTS, "mono", 0.50); /* one two-level buzzer */
/* Devices */
CASSETTE(config, "cassette", 0).add_route(ALL_OUTPUTS, "mono", 0.25);
TMS9901(config, m_tms9901_usr, 8_MHz_XTAL / 4);
m_tms9901_usr->p_out_cb(0).set(FUNC(tm990189_state::usr9901_led0_w));
m_tms9901_usr->p_out_cb(1).set(FUNC(tm990189_state::usr9901_led1_w));
m_tms9901_usr->p_out_cb(2).set(FUNC(tm990189_state::usr9901_led2_w));
m_tms9901_usr->p_out_cb(3).set(FUNC(tm990189_state::usr9901_led3_w));
m_tms9901_usr->intlevel_cb().set(FUNC(tm990189_state::usr9901_interrupt_callback));
TMS9901(config, m_tms9901_sys, 8_MHz_XTAL / 4);
m_tms9901_sys->read_cb().set(FUNC(tm990189_state::sys9901_r));
m_tms9901_sys->p_out_cb(0).set(FUNC(tm990189_state::sys9901_digitsel0_w));
m_tms9901_sys->p_out_cb(1).set(FUNC(tm990189_state::sys9901_digitsel1_w));
m_tms9901_sys->p_out_cb(2).set(FUNC(tm990189_state::sys9901_digitsel2_w));
m_tms9901_sys->p_out_cb(3).set(FUNC(tm990189_state::sys9901_digitsel3_w));
m_tms9901_sys->p_out_cb(4).set(FUNC(tm990189_state::sys9901_segment0_w));
m_tms9901_sys->p_out_cb(5).set(FUNC(tm990189_state::sys9901_segment1_w));
m_tms9901_sys->p_out_cb(6).set(FUNC(tm990189_state::sys9901_segment2_w));
m_tms9901_sys->p_out_cb(7).set(FUNC(tm990189_state::sys9901_segment3_w));
m_tms9901_sys->p_out_cb(8).set(FUNC(tm990189_state::sys9901_segment4_w));
m_tms9901_sys->p_out_cb(9).set(FUNC(tm990189_state::sys9901_segment5_w));
m_tms9901_sys->p_out_cb(10).set(FUNC(tm990189_state::sys9901_segment6_w));
m_tms9901_sys->p_out_cb(11).set(FUNC(tm990189_state::sys9901_segment7_w));
m_tms9901_sys->p_out_cb(12).set(FUNC(tm990189_state::sys9901_dsplytrgr_w));
m_tms9901_sys->p_out_cb(13).set(FUNC(tm990189_state::sys9901_shiftlight_w));
m_tms9901_sys->p_out_cb(14).set(FUNC(tm990189_state::sys9901_spkrdrive_w));
m_tms9901_sys->p_out_cb(15).set(FUNC(tm990189_state::sys9901_tapewdata_w));
m_tms9901_sys->intlevel_cb().set(FUNC(tm990189_state::sys9901_interrupt_callback));
TMS9902(config, m_tms9902, 8_MHz_XTAL / 4);
m_tms9902->xmit_cb().set(FUNC(tm990189_state::xmit_callback)); // called when a character is transmitted;
TM990_189_RS232(config, "rs232", 0, m_tms9902);
timer_device &display_timer(TIMER(config, "display_timer"));
display_timer.configure_periodic(FUNC(tm990189_state::display_callback), attotime::from_hz(30));
display_timer.set_start_delay(attotime::from_msec(150));
}
void mtx_state::mtx512(machine_config &config)
{
/* basic machine hardware */
Z80(config, m_maincpu, 4_MHz_XTAL);
m_maincpu->set_addrmap(AS_PROGRAM, &mtx_state::mtx_mem);
m_maincpu->set_addrmap(AS_IO, &mtx_state::mtx_io);
m_maincpu->set_daisy_config(mtx_daisy_chain);
/* video hardware */
tms9929a_device &vdp(TMS9929A(config, "tms9929a", 10.6875_MHz_XTAL));
vdp.set_screen("screen");
vdp.set_vram_size(0x4000);
vdp.int_callback().set(FUNC(mtx_state::mtx_tms9929a_interrupt));
SCREEN(config, "screen", SCREEN_TYPE_RASTER);
/* sound hardware */
SPEAKER(config, "mono").front_center();
SN76489A(config, m_sn, 4_MHz_XTAL).add_route(ALL_OUTPUTS, "mono", 1.00);
/* devices */
Z80CTC(config, m_z80ctc, 4_MHz_XTAL);
m_z80ctc->intr_callback().set_inputline(m_maincpu, INPUT_LINE_IRQ0);
m_z80ctc->zc_callback<1>().set(FUNC(mtx_state::ctc_trg1_w));
m_z80ctc->zc_callback<2>().set(FUNC(mtx_state::ctc_trg2_w));
TIMER(config, "z80ctc_timer").configure_periodic(FUNC(mtx_state::ctc_tick), attotime::from_hz(4_MHz_XTAL/13));
CENTRONICS(config, m_centronics, centronics_devices, "printer");
m_centronics->busy_handler().set(FUNC(mtx_state::write_centronics_busy));
m_centronics->fault_handler().set(FUNC(mtx_state::write_centronics_fault));
m_centronics->perror_handler().set(FUNC(mtx_state::write_centronics_perror));
m_centronics->select_handler().set(FUNC(mtx_state::write_centronics_select));
output_latch_device ¢_data_out(OUTPUT_LATCH(config, "cent_data_out"));
m_centronics->set_output_latch(cent_data_out);
snapshot_image_device &snapshot(SNAPSHOT(config, "snapshot"));
snapshot.set_handler(snapquick_load_delegate(&SNAPSHOT_LOAD_NAME(mtx_state, mtx), this), "mtx", attotime::from_seconds(1));
quickload_image_device &quickload(QUICKLOAD(config, "quickload"));
quickload.set_handler(snapquick_load_delegate(&QUICKLOAD_LOAD_NAME(mtx_state, mtx), this), "run", attotime::from_seconds(1));
CASSETTE(config, m_cassette);
m_cassette->set_default_state(CASSETTE_PLAY | CASSETTE_MOTOR_DISABLED | CASSETTE_SPEAKER_MUTED);
m_cassette->set_interface("mtx_cass");
TIMER(config, "cassette_timer").configure_periodic(FUNC(mtx_state::cassette_tick), attotime::from_hz(44100));
/* internal ram */
RAM(config, m_ram).set_default_size("64K").set_extra_options("96K,128K,192K,320K,448K,512K");
/* rom extension board */
GENERIC_SOCKET(config, m_extrom, generic_plain_slot, "mtx_rom", "bin,rom");
m_extrom->set_device_load(device_image_load_delegate(&mtx_state::device_image_load_extrom_load, this));
/* rs232 board with disk drive bus */
MTX_EXP_SLOT(config, m_exp, mtx_expansion_devices, nullptr);
m_exp->set_program_space(m_maincpu, AS_PROGRAM);
m_exp->set_io_space(m_maincpu, AS_IO);
m_exp->int_handler().set_inputline(m_maincpu, INPUT_LINE_IRQ0);
m_exp->nmi_handler().set_inputline(m_maincpu, INPUT_LINE_NMI);
m_exp->busreq_handler().set_inputline(m_maincpu, Z80_INPUT_LINE_BUSRQ);
/* cartridge slot */
GENERIC_CARTSLOT(config, m_rompak, generic_plain_slot, "mtx_cart", "bin,rom");
m_rompak->set_device_load(device_image_load_delegate(&mtx_state::device_image_load_rompak_load, this));
/* software lists */
SOFTWARE_LIST(config, "cass_list").set_original("mtx_cass");
SOFTWARE_LIST(config, "flop_list").set_original("mtx_flop");
SOFTWARE_LIST(config, "cart_list").set_original("mtx_cart");
SOFTWARE_LIST(config, "rom_list").set_original("mtx_rom");
}
