void batching_add_laser_internal(primitive_batch *batch, vec3d *p0, float width1, vec3d *p1, float width2, int r, int g, int b)
{
Assert(batch->get_render_info().prim_type == PRIM_TYPE_TRIS);
width1 *= 0.5f;
width2 *= 0.5f;
vec3d uvec, fvec, rvec, center, reye;
vm_vec_sub( &fvec, p0, p1 );
vm_vec_normalize_safe( &fvec );
vm_vec_avg( ¢er, p0, p1 ); // needed for the return value only
vm_vec_sub(&reye, &Eye_position, ¢er);
vm_vec_normalize(&reye);
// compute the up vector
vm_vec_cross(&uvec, &fvec, &reye);
vm_vec_normalize_safe(&uvec);
// ... the forward vector
vm_vec_cross(&fvec, &uvec, &reye);
vm_vec_normalize_safe(&fvec);
// now recompute right vector, in case it wasn't entirely perpendiclar
vm_vec_cross(&rvec, &uvec, &fvec);
// Now have uvec, which is up vector and rvec which is the normal
// of the face.
vec3d start, end;
vm_vec_scale_add(&start, p0, &fvec, -width1);
vm_vec_scale_add(&end, p1, &fvec, width2);
vec3d vecs[4];
batch_vertex verts[6];
vm_vec_scale_add( &vecs[0], &end, &uvec, width2 );
vm_vec_scale_add( &vecs[1], &start, &uvec, width1 );
vm_vec_scale_add( &vecs[2], &start, &uvec, -width1 );
vm_vec_scale_add( &vecs[3], &end, &uvec, -width2 );
verts[0].position = vecs[0];
verts[1].position = vecs[1];
verts[2].position = vecs[2];
verts[3].position = vecs[0];
verts[4].position = vecs[2];
verts[5].position = vecs[3];
verts[0].tex_coord.u = 1.0f;
verts[0].tex_coord.v = 0.0f;
verts[1].tex_coord.u = 0.0f;
verts[1].tex_coord.v = 0.0f;
verts[2].tex_coord.u = 0.0f;
verts[2].tex_coord.v = 1.0f;
verts[3].tex_coord.u = 1.0f;
verts[3].tex_coord.v = 0.0f;
verts[4].tex_coord.u = 0.0f;
verts[4].tex_coord.v = 1.0f;
verts[5].tex_coord.u = 1.0f;
verts[5].tex_coord.v = 1.0f;
verts[0].r = (ubyte)r;
verts[0].g = (ubyte)g;
verts[0].b = (ubyte)b;
verts[0].a = 255;
verts[1].r = (ubyte)r;
verts[1].g = (ubyte)g;
verts[1].b = (ubyte)b;
verts[1].a = 255;
verts[2].r = (ubyte)r;
verts[2].g = (ubyte)g;
verts[2].b = (ubyte)b;
verts[2].a = 255;
verts[3].r = (ubyte)r;
verts[3].g = (ubyte)g;
verts[3].b = (ubyte)b;
verts[3].a = 255;
verts[4].r = (ubyte)r;
verts[4].g = (ubyte)g;
verts[4].b = (ubyte)b;
verts[4].a = 255;
verts[5].r = (ubyte)r;
verts[5].g = (ubyte)g;
verts[5].b = (ubyte)b;
verts[5].a = 255;
batch->add_triangle(&verts[0], &verts[1], &verts[2]);
batch->add_triangle(&verts[3], &verts[4], &verts[5]);
}
void batching_add_bitmap_rotated_internal(primitive_batch *batch, vertex *pnt, float angle, float rad, color *clr, float depth)
{
Assert(batch->get_render_info().prim_type == PRIM_TYPE_TRIS);
float radius = rad;
rad *= 1.41421356f;//1/0.707, becase these are the points of a square or width and height rad
extern float Physics_viewer_bank;
angle -= Physics_viewer_bank;
if ( angle < 0.0f )
angle += PI2;
else if ( angle > PI2 )
angle -= PI2;
vec3d PNT(pnt->world);
vec3d p[4];
vec3d fvec, rvec, uvec;
batch_vertex verts[6];
vm_vec_sub(&fvec, &View_position, &PNT);
vm_vec_normalize_safe(&fvec);
vm_rot_point_around_line(&uvec, &View_matrix.vec.uvec, angle, &vmd_zero_vector, &View_matrix.vec.fvec);
vm_vec_cross(&rvec, &View_matrix.vec.fvec, &uvec);
vm_vec_normalize_safe(&rvec);
vm_vec_cross(&uvec, &View_matrix.vec.fvec, &rvec);
vm_vec_scale_add(&PNT, &PNT, &fvec, depth);
vm_vec_scale_add(&p[0], &PNT, &rvec, rad);
vm_vec_scale_add(&p[2], &PNT, &rvec, -rad);
vm_vec_scale_add(&p[1], &p[2], &uvec, rad);
vm_vec_scale_add(&p[3], &p[0], &uvec, -rad);
vm_vec_scale_add(&p[0], &p[0], &uvec, rad);
vm_vec_scale_add(&p[2], &p[2], &uvec, -rad);
//move all the data from the vecs into the verts
//tri 1
verts[5].position = p[3];
verts[4].position = p[2];
verts[3].position = p[1];
//tri 2
verts[2].position = p[3];
verts[1].position = p[1];
verts[0].position = p[0];
//tri 1
verts[5].tex_coord.u = 0.0f;
verts[5].tex_coord.v = 0.0f;
verts[4].tex_coord.u = 1.0f;
verts[4].tex_coord.v = 0.0f;
verts[3].tex_coord.u = 1.0f;
verts[3].tex_coord.v = 1.0f;
//tri 2
verts[2].tex_coord.u = 0.0f;
verts[2].tex_coord.v = 0.0f;
verts[1].tex_coord.u = 1.0f;
verts[1].tex_coord.v = 1.0f;
verts[0].tex_coord.u = 0.0f;
verts[0].tex_coord.v = 1.0f;
for (int i = 0; i < 6 ; i++) {
verts[i].r = clr->red;
verts[i].g = clr->green;
verts[i].b = clr->blue;
verts[i].a = clr->alpha;
verts[i].radius = radius;
}
batch->add_triangle(&verts[0], &verts[1], &verts[2]);
batch->add_triangle(&verts[3], &verts[4], &verts[5]);
}
void batching_add_beam_internal(primitive_batch *batch, vec3d *start, vec3d *end, float width, color *clr, float offset)
{
Assert(batch->get_render_info().prim_type == PRIM_TYPE_TRIS);
vec3d p[4];
batch_vertex verts[6];
vec3d fvec, uvecs, uvece, evec;
vm_vec_sub(&fvec, start, end);
vm_vec_normalize_safe(&fvec);
vm_vec_sub(&evec, &View_position, start);
vm_vec_normalize_safe(&evec);
vm_vec_cross(&uvecs, &fvec, &evec);
vm_vec_normalize_safe(&uvecs);
vm_vec_sub(&evec, &View_position, end);
vm_vec_normalize_safe(&evec);
vm_vec_cross(&uvece, &fvec, &evec);
vm_vec_normalize_safe(&uvece);
vm_vec_scale_add(&p[0], start, &uvecs, width);
vm_vec_scale_add(&p[1], end, &uvece, width);
vm_vec_scale_add(&p[2], end, &uvece, -width);
vm_vec_scale_add(&p[3], start, &uvecs, -width);
//move all the data from the vecs into the verts
//tri 1
verts[0].position = p[3];
verts[1].position = p[2];
verts[2].position = p[1];
//tri 2
verts[3].position = p[3];
verts[4].position = p[1];
verts[5].position = p[0];
//set up the UV coords
//tri 1
verts[0].tex_coord.u = 0.0f;
verts[0].tex_coord.v = 0.0f;
verts[1].tex_coord.u = 1.0f;
verts[1].tex_coord.v = 0.0f;
verts[2].tex_coord.u = 1.0f;
verts[2].tex_coord.v = 1.0f;
//tri 2
verts[3].tex_coord.u = 0.0f;
verts[3].tex_coord.v = 0.0f;
verts[4].tex_coord.u = 1.0f;
verts[4].tex_coord.v = 1.0f;
verts[5].tex_coord.u = 0.0f;
verts[5].tex_coord.v = 1.0f;
for(int i = 0; i < 6; i++) {
verts[i].r = clr->red;
verts[i].g = clr->green;
verts[i].b = clr->blue;
verts[i].a = clr->alpha;
if(offset > 0.0f) {
verts[i].radius = offset;
} else {
verts[i].radius = width;
}
}
batch->add_triangle(&verts[0], &verts[1], &verts[2]);
batch->add_triangle(&verts[3], &verts[4], &verts[5]);
}
// Create a grid
// *forward is vector pointing forward
// *right is vector pointing right
// *center is center point of grid
// length is length of grid
// width is width of grid
// square_size is size of a grid square
// For example:
// *forward = (0.0, 0.0, 1.0)
// *right = (1.0, 0.0, 0.0)
// *center = (0.0, 0.0, 0.0)
// nrows = 10
// ncols = 50.0
// square_size = 10.0
// will generate a grid of squares 10 long by 5 wide.
// Each grid square will be 10.0 x 10.0 units.
// The center of the grid will be at the global origin.
// The grid will be parallel to the xz plane (because the normal is 0,1,0).
// (In fact, it will be the xz plane because it is centered on the origin.)
//
// Stuffs grid in *gridp. If gridp == NULL, mallocs and returns a grid.
grid *create_grid(grid *gridp, vector *forward, vector *right, vector *center, int nrows, int ncols, float square_size)
{
int i, ncols2, nrows2, d = 1;
vector dfvec, drvec, cur, cur2, tvec, uvec, save, save2;
Assert(square_size > 0.0);
if (double_fine_gridlines)
d = 2;
if (gridp == NULL)
gridp = (grid *) malloc(sizeof(grid));
Assert(gridp);
gridp->center = *center;
gridp->square_size = square_size;
// Create the plane equation.
Assert(!IS_VEC_NULL(forward));
Assert(!IS_VEC_NULL(right));
vm_vec_copy_normalize(&dfvec, forward);
vm_vec_copy_normalize(&drvec, right);
vm_vec_cross(&uvec, &dfvec, &drvec);
Assert(!IS_VEC_NULL(&uvec));
gridp->gmatrix.v.uvec = uvec;
gridp->planeD = -(center->xyz.x * uvec.xyz.x + center->xyz.y * uvec.xyz.y + center->xyz.z * uvec.xyz.z);
Assert(!_isnan(gridp->planeD));
gridp->gmatrix.v.fvec = dfvec;
gridp->gmatrix.v.rvec = drvec;
vm_vec_scale(&dfvec, square_size);
vm_vec_scale(&drvec, square_size);
vm_vec_scale_add(&cur, center, &dfvec, (float) -nrows * d / 2);
vm_vec_scale_add2(&cur, &drvec, (float) -ncols * d / 2);
vm_vec_scale_add(&cur2, center, &dfvec, (float) -nrows * 5 / 2);
vm_vec_scale_add2(&cur2, &drvec, (float) -ncols * 5 / 2);
save = cur;
save2 = cur2;
gridp->ncols = ncols;
gridp->nrows = nrows;
ncols2 = ncols / 2;
nrows2 = nrows / 2;
Assert(ncols < MAX_GRIDLINE_POINTS && nrows < MAX_GRIDLINE_POINTS);
// Create the points along the edges of the grid, so we can just draw lines
// between them to form the grid.
for (i=0; i<=ncols*d; i++) {
gridp->gpoints1[i] = cur; // small, dark gridline points
vm_vec_scale_add(&tvec, &cur, &dfvec, (float) nrows * d);
gridp->gpoints2[i] = tvec;
vm_vec_add2(&cur, &drvec);
}
for (i=0; i<=ncols2; i++) {
gridp->gpoints5[i] = cur2; // large, brighter gridline points
vm_vec_scale_add(&tvec, &cur2, &dfvec, (float) nrows2 * 10);
gridp->gpoints6[i] = tvec;
vm_vec_scale_add2(&cur2, &drvec, 10.0f);
}
cur = save;
cur2 = save2;
for (i=0; i<=nrows*d; i++) {
gridp->gpoints3[i] = cur; // small, dark gridline points
vm_vec_scale_add(&tvec, &cur, &drvec, (float) ncols * d);
gridp->gpoints4[i] = tvec;
vm_vec_add2(&cur, &dfvec);
}
for (i=0; i<=nrows2; i++) {
gridp->gpoints7[i] = cur2; // large, brighter gridline points
vm_vec_scale_add(&tvec, &cur2, &drvec, (float) ncols2 * 10);
gridp->gpoints8[i] = tvec;
vm_vec_scale_add2(&cur2, &dfvec, 10.0f);
}
return gridp;
}
void batching_add_bitmap_internal(primitive_batch *batch, vertex *pnt, int orient, float rad, color *clr, float depth)
{
Assert(batch->get_render_info().prim_type == PRIM_TYPE_TRIS);
float radius = rad;
rad *= 1.41421356f;//1/0.707, becase these are the points of a square or width and height rad
vec3d PNT(pnt->world);
vec3d p[4];
vec3d fvec, rvec, uvec;
batch_vertex verts[6];
// get the direction from the point to the eye
vm_vec_sub(&fvec, &View_position, &PNT);
vm_vec_normalize_safe(&fvec);
// get an up vector in the general direction of what we want
uvec = View_matrix.vec.uvec;
// make a right vector from the f and up vector, this r vec is exactly what we want, so...
vm_vec_cross(&rvec, &View_matrix.vec.fvec, &uvec);
vm_vec_normalize_safe(&rvec);
// fix the u vec with it
vm_vec_cross(&uvec, &View_matrix.vec.fvec, &rvec);
// move the center of the sprite based on the depth parameter
if ( depth != 0.0f )
vm_vec_scale_add(&PNT, &PNT, &fvec, depth);
// move one of the verts to the left
vm_vec_scale_add(&p[0], &PNT, &rvec, rad);
// and one to the right
vm_vec_scale_add(&p[2], &PNT, &rvec, -rad);
// now move all oof the verts to were they need to be
vm_vec_scale_add(&p[1], &p[2], &uvec, rad);
vm_vec_scale_add(&p[3], &p[0], &uvec, -rad);
vm_vec_scale_add(&p[0], &p[0], &uvec, rad);
vm_vec_scale_add(&p[2], &p[2], &uvec, -rad);
//move all the data from the vecs into the verts
//tri 1
verts[5].position = p[3];
verts[4].position = p[2];
verts[3].position = p[1];
//tri 2
verts[2].position = p[3];
verts[1].position = p[1];
verts[0].position = p[0];
// set up the UV coords
if ( orient & 1 ) {
// tri 1
verts[5].tex_coord.u = 1.0f;
verts[4].tex_coord.u = 0.0f;
verts[3].tex_coord.u = 0.0f;
// tri 2
verts[2].tex_coord.u = 1.0f;
verts[1].tex_coord.u = 0.0f;
verts[0].tex_coord.u = 1.0f;
} else {
// tri 1
verts[5].tex_coord.u = 0.0f;
verts[4].tex_coord.u = 1.0f;
verts[3].tex_coord.u = 1.0f;
// tri 2
verts[2].tex_coord.u = 0.0f;
verts[1].tex_coord.u = 1.0f;
verts[0].tex_coord.u = 0.0f;
}
if ( orient & 2 ) {
// tri 1
verts[5].tex_coord.v = 1.0f;
verts[4].tex_coord.v = 1.0f;
verts[3].tex_coord.v = 0.0f;
// tri 2
verts[2].tex_coord.v = 1.0f;
verts[1].tex_coord.v = 0.0f;
verts[0].tex_coord.v = 0.0f;
} else {
// tri 1
verts[5].tex_coord.v = 0.0f;
verts[4].tex_coord.v = 0.0f;
verts[3].tex_coord.v = 1.0f;
// tri 2
verts[2].tex_coord.v = 0.0f;
verts[1].tex_coord.v = 1.0f;
verts[0].tex_coord.v = 1.0f;
}
for (int i = 0; i < 6 ; i++) {
verts[i].r = clr->red;
verts[i].g = clr->green;
verts[i].b = clr->blue;
verts[i].a = clr->alpha;
verts[i].radius = radius;
}
batch->add_triangle(&verts[5], &verts[4], &verts[3]);
batch->add_triangle(&verts[2], &verts[1], &verts[0]);
}
float geometry_batcher::draw_laser(vec3d *p0, float width1, vec3d *p1, float width2, int r, int g, int b)
{
width1 *= 0.5f;
width2 *= 0.5f;
vec3d uvec, fvec, rvec, center, reye;
vm_vec_sub( &fvec, p0, p1 );
vm_vec_normalize_safe( &fvec );
vm_vec_avg( ¢er, p0, p1 ); // needed for the return value only
vm_vec_sub(&reye, &Eye_position, ¢er);
vm_vec_normalize(&reye);
// compute the up vector
vm_vec_cross(&uvec, &fvec, &reye);
vm_vec_normalize_safe(&uvec);
// ... the forward vector
vm_vec_cross(&fvec, &uvec, &reye);
vm_vec_normalize_safe(&fvec);
// now recompute right vector, in case it wasn't entirely perpendiclar
vm_vec_cross(&rvec, &uvec, &fvec);
// Now have uvec, which is up vector and rvec which is the normal
// of the face.
vec3d start, end;
vm_vec_scale_add(&start, p0, &fvec, -width1);
vm_vec_scale_add(&end, p1, &fvec, width2);
vec3d vecs[4];
vertex *pts = &vert[n_to_render * 3];
vm_vec_scale_add( &vecs[0], &end, &uvec, width2 );
vm_vec_scale_add( &vecs[1], &start, &uvec, width1 );
vm_vec_scale_add( &vecs[2], &start, &uvec, -width1 );
vm_vec_scale_add( &vecs[3], &end, &uvec, -width2 );
g3_transfer_vertex( &pts[0], &vecs[0] );
g3_transfer_vertex( &pts[1], &vecs[1] );
g3_transfer_vertex( &pts[2], &vecs[2] );
g3_transfer_vertex( &pts[3], &vecs[0] );
g3_transfer_vertex( &pts[4], &vecs[2] );
g3_transfer_vertex( &pts[5], &vecs[3] );
pts[0].texture_position.u = 1.0f;
pts[0].texture_position.v = 0.0f;
pts[1].texture_position.u = 0.0f;
pts[1].texture_position.v = 0.0f;
pts[2].texture_position.u = 0.0f;
pts[2].texture_position.v = 1.0f;
pts[3].texture_position.u = 1.0f;
pts[3].texture_position.v = 0.0f;
pts[4].texture_position.u = 0.0f;
pts[4].texture_position.v = 1.0f;
pts[5].texture_position.u = 1.0f;
pts[5].texture_position.v = 1.0f;
pts[0].r = (ubyte)r;
pts[0].g = (ubyte)g;
pts[0].b = (ubyte)b;
pts[0].a = 255;
pts[1].r = (ubyte)r;
pts[1].g = (ubyte)g;
pts[1].b = (ubyte)b;
pts[1].a = 255;
pts[2].r = (ubyte)r;
pts[2].g = (ubyte)g;
pts[2].b = (ubyte)b;
pts[2].a = 255;
pts[3].r = (ubyte)r;
pts[3].g = (ubyte)g;
pts[3].b = (ubyte)b;
pts[3].a = 255;
pts[4].r = (ubyte)r;
pts[4].g = (ubyte)g;
pts[4].b = (ubyte)b;
pts[4].a = 255;
pts[5].r = (ubyte)r;
pts[5].g = (ubyte)g;
pts[5].b = (ubyte)b;
pts[5].a = 255;
n_to_render += 2;
use_radius = false;
return center.xyz.z;
}
void geometry_batcher::draw_beam(vec3d *start, vec3d *end, float width, float intensity, float offset)
{
vec3d p[4];
vertex *P = &vert[n_to_render * 3];
float *R = &radius_list[n_to_render * 3];
vec3d fvec, uvecs, uvece, evec;
vm_vec_sub(&fvec, start, end);
vm_vec_normalize_safe(&fvec);
vm_vec_sub(&evec, &View_position, start);
vm_vec_normalize_safe(&evec);
vm_vec_cross(&uvecs, &fvec, &evec);
vm_vec_normalize_safe(&uvecs);
vm_vec_sub(&evec, &View_position, end);
vm_vec_normalize_safe(&evec);
vm_vec_cross(&uvece, &fvec, &evec);
vm_vec_normalize_safe(&uvece);
vm_vec_scale_add(&p[0], start, &uvecs, width);
vm_vec_scale_add(&p[1], end, &uvece, width);
vm_vec_scale_add(&p[2], end, &uvece, -width);
vm_vec_scale_add(&p[3], start, &uvecs, -width);
//move all the data from the vecs into the verts
//tri 1
g3_transfer_vertex(&P[0], &p[3]);
g3_transfer_vertex(&P[1], &p[2]);
g3_transfer_vertex(&P[2], &p[1]);
//tri 2
g3_transfer_vertex(&P[3], &p[3]);
g3_transfer_vertex(&P[4], &p[1]);
g3_transfer_vertex(&P[5], &p[0]);
//set up the UV coords
//tri 1
P[0].texture_position.u = 0.0f; P[0].texture_position.v = 0.0f;
P[1].texture_position.u = 1.0f; P[1].texture_position.v = 0.0f;
P[2].texture_position.u = 1.0f; P[2].texture_position.v = 1.0f;
//tri 2
P[3].texture_position.u = 0.0f; P[3].texture_position.v = 0.0f;
P[4].texture_position.u = 1.0f; P[4].texture_position.v = 1.0f;
P[5].texture_position.u = 0.0f; P[5].texture_position.v = 1.0f;
ubyte _color = (ubyte)(255.0f * intensity);
for(int i = 0; i < 6; i++){
P[i].r = P[i].g = P[i].b = P[i].a = _color;
if(offset > 0.0f) {
R[i] = offset;
} else {
R[i] = width;
}
}
n_to_render += 2;
use_radius = true;
}
void geometry_batcher::draw_bitmap(vertex *pnt, float rad, float angle, float depth)
{
float radius = rad;
rad *= 1.41421356f;//1/0.707, becase these are the points of a square or width and height rad
extern float Physics_viewer_bank;
angle -= Physics_viewer_bank;
if ( angle < 0.0f )
angle += PI2;
else if ( angle > PI2 )
angle -= PI2;
vec3d PNT(pnt->world);
vec3d p[4];
vec3d fvec, rvec, uvec;
vertex *P = &vert[n_to_render * 3];
float *R = &radius_list[n_to_render * 3];
vm_vec_sub(&fvec, &View_position, &PNT);
vm_vec_normalize_safe(&fvec);
vm_rot_point_around_line(&uvec, &View_matrix.vec.uvec, angle, &vmd_zero_vector, &View_matrix.vec.fvec);
vm_vec_cross(&rvec, &View_matrix.vec.fvec, &uvec);
vm_vec_normalize_safe(&rvec);
vm_vec_cross(&uvec, &View_matrix.vec.fvec, &rvec);
vm_vec_scale_add(&PNT, &PNT, &fvec, depth);
vm_vec_scale_add(&p[0], &PNT, &rvec, rad);
vm_vec_scale_add(&p[2], &PNT, &rvec, -rad);
vm_vec_scale_add(&p[1], &p[2], &uvec, rad);
vm_vec_scale_add(&p[3], &p[0], &uvec, -rad);
vm_vec_scale_add(&p[0], &p[0], &uvec, rad);
vm_vec_scale_add(&p[2], &p[2], &uvec, -rad);
//move all the data from the vecs into the verts
//tri 1
g3_transfer_vertex(&P[5], &p[3]);
g3_transfer_vertex(&P[4], &p[2]);
g3_transfer_vertex(&P[3], &p[1]);
//tri 2
g3_transfer_vertex(&P[2], &p[3]);
g3_transfer_vertex(&P[1], &p[1]);
g3_transfer_vertex(&P[0], &p[0]);
//tri 1
P[5].texture_position.u = 0.0f; P[5].texture_position.v = 0.0f;
P[4].texture_position.u = 1.0f; P[4].texture_position.v = 0.0f;
P[3].texture_position.u = 1.0f; P[3].texture_position.v = 1.0f;
//tri 2
P[2].texture_position.u = 0.0f; P[2].texture_position.v = 0.0f;
P[1].texture_position.u = 1.0f; P[1].texture_position.v = 1.0f;
P[0].texture_position.u = 0.0f; P[0].texture_position.v = 1.0f;
for (int i = 0; i < 6 ; i++) {
P[i].r = pnt->r;
P[i].g = pnt->g;
P[i].b = pnt->b;
P[i].a = pnt->a;
R[i] = radius;
}
n_to_render += 2;
}
/*
0----1
|\ |
| \ |
3----2
*/
void geometry_batcher::draw_bitmap(vertex *pnt, int orient, float rad, float depth)
{
float radius = rad;
rad *= 1.41421356f;//1/0.707, becase these are the points of a square or width and height rad
vec3d PNT(pnt->world);
vec3d p[4];
vec3d fvec, rvec, uvec;
vertex *P = &vert[n_to_render * 3];
float *R = &radius_list[n_to_render * 3];
// get the direction from the point to the eye
vm_vec_sub(&fvec, &View_position, &PNT);
vm_vec_normalize_safe(&fvec);
// get an up vector in the general direction of what we want
uvec = View_matrix.vec.uvec;
// make a right vector from the f and up vector, this r vec is exactly what we want, so...
vm_vec_cross(&rvec, &View_matrix.vec.fvec, &uvec);
vm_vec_normalize_safe(&rvec);
// fix the u vec with it
vm_vec_cross(&uvec, &View_matrix.vec.fvec, &rvec);
// move the center of the sprite based on the depth parameter
if ( depth != 0.0f )
vm_vec_scale_add(&PNT, &PNT, &fvec, depth);
// move one of the verts to the left
vm_vec_scale_add(&p[0], &PNT, &rvec, rad);
// and one to the right
vm_vec_scale_add(&p[2], &PNT, &rvec, -rad);
// now move all oof the verts to were they need to be
vm_vec_scale_add(&p[1], &p[2], &uvec, rad);
vm_vec_scale_add(&p[3], &p[0], &uvec, -rad);
vm_vec_scale_add(&p[0], &p[0], &uvec, rad);
vm_vec_scale_add(&p[2], &p[2], &uvec, -rad);
//move all the data from the vecs into the verts
//tri 1
g3_transfer_vertex(&P[5], &p[3]);
g3_transfer_vertex(&P[4], &p[2]);
g3_transfer_vertex(&P[3], &p[1]);
//tri 2
g3_transfer_vertex(&P[2], &p[3]);
g3_transfer_vertex(&P[1], &p[1]);
g3_transfer_vertex(&P[0], &p[0]);
// set up the UV coords
if ( orient & 1 ) {
// tri 1
P[5].texture_position.u = 1.0f;
P[4].texture_position.u = 0.0f;
P[3].texture_position.u = 0.0f;
// tri 2
P[2].texture_position.u = 1.0f;
P[1].texture_position.u = 0.0f;
P[0].texture_position.u = 1.0f;
} else {
// tri 1
P[5].texture_position.u = 0.0f;
P[4].texture_position.u = 1.0f;
P[3].texture_position.u = 1.0f;
// tri 2
P[2].texture_position.u = 0.0f;
P[1].texture_position.u = 1.0f;
P[0].texture_position.u = 0.0f;
}
if ( orient & 2 ) {
// tri 1
P[5].texture_position.v = 1.0f;
P[4].texture_position.v = 1.0f;
P[3].texture_position.v = 0.0f;
// tri 2
P[2].texture_position.v = 1.0f;
P[1].texture_position.v = 0.0f;
P[0].texture_position.v = 0.0f;
} else {
// tri 1
P[5].texture_position.v = 0.0f;
P[4].texture_position.v = 0.0f;
P[3].texture_position.v = 1.0f;
// tri 2
P[2].texture_position.v = 0.0f;
P[1].texture_position.v = 1.0f;
P[0].texture_position.v = 1.0f;
}
for (int i = 0; i < 6 ; i++) {
P[i].r = pnt->r;
P[i].g = pnt->g;
P[i].b = pnt->b;
P[i].a = pnt->a;
R[i] = radius;
}
n_to_render += 2;
}
//compute the corners of a rod. fills in vertbuf.
static int calc_rod_corners(g3s_point *bot_point,fix bot_width,g3s_point *top_point,fix top_width)
{
vms_vector delta_vec,top,tempv,rod_norm;
ubyte codes_and;
int i;
//compute vector from one point to other, do cross product with vector
//from eye to get perpendiclar
vm_vec_sub(&delta_vec,&bot_point->p3_vec,&top_point->p3_vec);
//unscale for aspect
delta_vec.x = fixdiv(delta_vec.x,Matrix_scale.x);
delta_vec.y = fixdiv(delta_vec.y,Matrix_scale.y);
//calc perp vector
//do lots of normalizing to prevent overflowing. When this code works,
//it should be optimized
vm_vec_normalize(&delta_vec);
vm_vec_copy_normalize(&top,&top_point->p3_vec);
vm_vec_cross(&rod_norm,&delta_vec,&top);
vm_vec_normalize(&rod_norm);
//scale for aspect
rod_norm.x = fixmul(rod_norm.x,Matrix_scale.x);
rod_norm.y = fixmul(rod_norm.y,Matrix_scale.y);
//now we have the usable edge. generate four points
//top points
vm_vec_copy_scale(&tempv,&rod_norm,top_width);
tempv.z = 0;
vm_vec_add(&rod_points[0].p3_vec,&top_point->p3_vec,&tempv);
vm_vec_sub(&rod_points[1].p3_vec,&top_point->p3_vec,&tempv);
vm_vec_copy_scale(&tempv,&rod_norm,bot_width);
tempv.z = 0;
vm_vec_sub(&rod_points[2].p3_vec,&bot_point->p3_vec,&tempv);
vm_vec_add(&rod_points[3].p3_vec,&bot_point->p3_vec,&tempv);
//now code the four points
for (i=0,codes_and=0xff;i<4;i++)
codes_and &= g3_code_point(&rod_points[i]);
if (codes_and)
return 1; //1 means off screen
//clear flags for new points (not projected)
for (i=0;i<4;i++)
rod_points[i].p3_flags = 0;
return 0;
}
