static int
wi_pci_enable(struct wi_softc *sc)
{
struct wi_pci_softc *psc = (struct wi_pci_softc *)sc;
/* establish the interrupt. */
sc->sc_ih = pci_intr_establish(psc->psc_pc,
psc->psc_ih, IPL_NET, wi_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(&sc->sc_dev, "couldn't establish interrupt\n");
return (EIO);
}
/* reset HFA3842 MAC core */
if (sc->sc_reset != NULL)
wi_pci_reset(sc);
return (0);
}
static int
wi_pci_enable(device_t self, int onoff)
{
struct wi_pci_softc *psc = device_private(self);
struct wi_softc *sc = &psc->psc_wi;
if (onoff) {
/* establish the interrupt. */
sc->sc_ih = pci_intr_establish(psc->psc_pc,
psc->psc_ih, IPL_NET, wi_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(sc->sc_dev,
"couldn't establish interrupt\n");
return EIO;
}
/* reset HFA3842 MAC core */
if (sc->sc_reset != NULL)
wi_pci_reset(sc);
} else
pci_intr_disestablish(psc->psc_pc, sc->sc_ih);
return 0;
}
static void
wi_pci_attach(device_t parent, device_t self, void *aux)
{
struct wi_pci_softc *psc = device_private(self);
struct wi_softc *sc = &psc->psc_wi;
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
const char *intrstr;
const struct wi_pci_product *wpp;
pci_intr_handle_t ih;
bus_space_tag_t memt, iot, plxt, tmdt;
bus_space_handle_t memh, ioh, plxh, tmdh;
char intrbuf[PCI_INTRSTR_LEN];
sc->sc_dev = self;
psc->psc_pc = pc;
psc->psc_pcitag = pa->pa_tag;
wpp = wi_pci_lookup(pa);
#ifdef DIAGNOSTIC
if (wpp == NULL) {
printf("\n");
panic("wi_pci_attach: impossible");
}
#endif
switch (wpp->wpp_chip) {
case CHIP_PLX_OTHER:
case CHIP_PLX_9052:
/* Map memory and I/O registers. */
if (pci_mapreg_map(pa, WI_PCI_LOMEM, PCI_MAPREG_TYPE_MEM, 0,
&memt, &memh, NULL, NULL) != 0) {
aprint_error(": can't map mem space\n");
return;
}
if (pci_mapreg_map(pa, WI_PCI_LOIO, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL) != 0) {
aprint_error(": can't map I/O space\n");
return;
}
if (wpp->wpp_chip == CHIP_PLX_OTHER) {
/* The PLX 9052 doesn't have IO at 0x14. Perhaps
other chips have, so we'll make this conditional. */
if (pci_mapreg_map(pa, WI_PCI_PLX_LOIO,
PCI_MAPREG_TYPE_IO, 0, &plxt, &plxh, NULL, NULL)
!= 0) {
aprint_error(": can't map PLX\n");
return;
}
}
break;
case CHIP_TMD_7160:
/* Used instead of PLX on at least one revision of
* the National Datacomm Corporation NCP130. Values
* for registers acquired from OpenBSD, which in
* turn got them from a Linux driver.
*/
/* Map COR and I/O registers. */
if (pci_mapreg_map(pa, WI_TMD_COR, PCI_MAPREG_TYPE_IO, 0,
&tmdt, &tmdh, NULL, NULL) != 0) {
aprint_error(": can't map TMD\n");
return;
}
if (pci_mapreg_map(pa, WI_TMD_IO, PCI_MAPREG_TYPE_IO, 0,
&iot, &ioh, NULL, NULL) != 0) {
aprint_error(": can't map I/O space\n");
return;
}
break;
default:
if (pci_mapreg_map(pa, WI_PCI_CBMA,
PCI_MAPREG_TYPE_MEM | PCI_MAPREG_MEM_TYPE_32BIT,
0, &iot, &ioh, NULL, NULL) != 0) {
aprint_error(": can't map mem space\n");
return;
}
memt = iot;
memh = ioh;
sc->sc_pci = 1;
break;
}
pci_aprint_devinfo(pa, NULL);
sc->sc_enabled = 1;
sc->sc_enable = wi_pci_enable;
sc->sc_iot = iot;
sc->sc_ioh = ioh;
/* Make sure interrupts are disabled. */
CSR_WRITE_2(sc, WI_INT_EN, 0);
CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF);
if (wpp->wpp_chip == CHIP_PLX_OTHER) {
uint32_t command;
#define WI_LOCAL_INTCSR 0x4c
#define WI_LOCAL_INTEN 0x40 /* poke this into INTCSR */
command = bus_space_read_4(plxt, plxh, WI_LOCAL_INTCSR);
command |= WI_LOCAL_INTEN;
bus_space_write_4(plxt, plxh, WI_LOCAL_INTCSR, command);
}
/* Map and establish the interrupt. */
if (pci_intr_map(pa, &ih)) {
aprint_error_dev(self, "couldn't map interrupt\n");
return;
}
intrstr = pci_intr_string(pc, ih, intrbuf, sizeof(intrbuf));
psc->psc_ih = ih;
sc->sc_ih = pci_intr_establish(pc, ih, IPL_NET, wi_intr, sc);
if (sc->sc_ih == NULL) {
aprint_error_dev(self, "couldn't establish interrupt");
if (intrstr != NULL)
aprint_error(" at %s", intrstr);
aprint_error("\n");
return;
}
aprint_normal_dev(self, "interrupting at %s\n", intrstr);
switch (wpp->wpp_chip) {
case CHIP_PLX_OTHER:
case CHIP_PLX_9052:
/*
* Setup the PLX chip for level interrupts and config index 1
* XXX - should really reset the PLX chip too.
*/
bus_space_write_1(memt, memh,
WI_PLX_COR_OFFSET, WI_PLX_COR_VALUE);
break;
case CHIP_TMD_7160:
/* Enable I/O mode and level interrupts on the embedded
* card. The card's COR is the first byte of BAR 0.
*/
bus_space_write_1(tmdt, tmdh, 0, WI_COR_IOMODE);
break;
default:
/* reset HFA3842 MAC core */
wi_pci_reset(sc);
break;
}
printf("%s:", device_xname(self));
if (wi_attach(sc, 0) != 0) {
aprint_error_dev(self, "failed to attach controller\n");
pci_intr_disestablish(pa->pa_pc, sc->sc_ih);
return;
}
if (!wpp->wpp_chip)
sc->sc_reset = wi_pci_reset;
if (pmf_device_register(self, NULL, NULL))
pmf_class_network_register(self, &sc->sc_if);
else
aprint_error_dev(self, "couldn't establish power handler\n");
}
