static int wil_resume_keep_radio_on(struct wil6210_priv *wil)
{
int rc = 0;
/* wil_status_resuming will be cleared when getting
* WMI_TRAFFIC_RESUME_EVENTID
*/
set_bit(wil_status_resuming, wil->status);
clear_bit(wil_status_suspended, wil->status);
wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
wil_unmask_irq(wil);
wil6210_bus_request(wil, wil->bus_request_kbps_pre_suspend);
/* Send WMI resume request to the device */
rc = wmi_resume(wil);
if (rc) {
wil_err(wil, "device failed to resume (%d)\n", rc);
if (no_fw_recovery)
goto out;
rc = wil_down(wil);
if (rc) {
wil_err(wil, "wil_down failed (%d)\n", rc);
goto out;
}
rc = wil_up(wil);
if (rc) {
wil_err(wil, "wil_up failed (%d)\n", rc);
goto out;
}
}
/* Wake all queues */
if (test_bit(wil_status_fwconnected, wil->status))
wil_update_net_queues_bh(wil, NULL, false);
out:
if (rc)
set_bit(wil_status_suspended, wil->status);
return rc;
}
static int wil_suspend_keep_radio_on(struct wil6210_priv *wil)
{
int rc = 0;
unsigned long data_comp_to;
wil_dbg_pm(wil, "suspend keep radio on\n");
/* Prevent handling of new tx and wmi commands */
rc = down_write_trylock(&wil->mem_lock);
if (!rc) {
wil_err(wil,
"device is busy. down_write_trylock failed, returned (0x%x)\n",
rc);
wil->suspend_stats.rejected_by_host++;
return -EBUSY;
}
set_bit(wil_status_suspending, wil->status);
up_write(&wil->mem_lock);
wil_pm_stop_all_net_queues(wil);
if (!wil_is_tx_idle(wil)) {
wil_dbg_pm(wil, "Pending TX data, reject suspend\n");
wil->suspend_stats.rejected_by_host++;
goto reject_suspend;
}
if (!wil->txrx_ops.is_rx_idle(wil)) {
wil_dbg_pm(wil, "Pending RX data, reject suspend\n");
wil->suspend_stats.rejected_by_host++;
goto reject_suspend;
}
if (!wil_is_wmi_idle(wil)) {
wil_dbg_pm(wil, "Pending WMI events, reject suspend\n");
wil->suspend_stats.rejected_by_host++;
goto reject_suspend;
}
/* Send WMI suspend request to the device */
rc = wmi_suspend(wil);
if (rc) {
wil_dbg_pm(wil, "wmi_suspend failed, reject suspend (%d)\n",
rc);
goto reject_suspend;
}
/* Wait for completion of the pending RX packets */
data_comp_to = jiffies + msecs_to_jiffies(WIL_DATA_COMPLETION_TO_MS);
if (test_bit(wil_status_napi_en, wil->status)) {
while (!wil->txrx_ops.is_rx_idle(wil)) {
if (time_after(jiffies, data_comp_to)) {
if (wil->txrx_ops.is_rx_idle(wil))
break;
wil_err(wil,
"TO waiting for idle RX, suspend failed\n");
wil->suspend_stats.r_on.failed_suspends++;
goto resume_after_fail;
}
wil_dbg_ratelimited(wil, "rx vring is not empty -> NAPI\n");
napi_synchronize(&wil->napi_rx);
msleep(20);
}
}
/* In case of pending WMI events, reject the suspend
* and resume the device.
* This can happen if the device sent the WMI events before
* approving the suspend.
*/
if (!wil_is_wmi_idle(wil)) {
wil_err(wil, "suspend failed due to pending WMI events\n");
wil->suspend_stats.r_on.failed_suspends++;
goto resume_after_fail;
}
wil_mask_irq(wil);
/* Disable device reset on PERST */
wil_s(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
if (wil->platform_ops.suspend) {
rc = wil->platform_ops.suspend(wil->platform_handle, true);
if (rc) {
wil_err(wil, "platform device failed to suspend (%d)\n",
rc);
wil->suspend_stats.r_on.failed_suspends++;
wil_c(wil, RGF_USER_CLKS_CTL_0, BIT_USER_CLKS_RST_PWGD);
wil_unmask_irq(wil);
goto resume_after_fail;
}
}
/* Save the current bus request to return to the same in resume */
wil->bus_request_kbps_pre_suspend = wil->bus_request_kbps;
wil6210_bus_request(wil, 0);
set_bit(wil_status_suspended, wil->status);
clear_bit(wil_status_suspending, wil->status);
return rc;
resume_after_fail:
set_bit(wil_status_resuming, wil->status);
clear_bit(wil_status_suspending, wil->status);
rc = wmi_resume(wil);
/* if resume succeeded, reject the suspend */
if (!rc) {
rc = -EBUSY;
wil_pm_wake_connected_net_queues(wil);
}
return rc;
reject_suspend:
clear_bit(wil_status_suspending, wil->status);
wil_pm_wake_connected_net_queues(wil);
return -EBUSY;
}
