ActionReply Helper::defaults(QVariantMap args)
{
Q_UNUSED(args)
//Disable security
QString filePath(QString(GRUB_CONFIGDIR)+QString(GRUB_SECURITY));
QFile::Permissions permissions = QFile::permissions(filePath);
permissions &= ~(QFile::ExeOwner | QFile::ExeUser | QFile::ExeGroup | QFile::ExeOther);
QFile::setPermissions(filePath, permissions);
ActionReply reply;
QString configFileName = GRUB_CONFIG;
QString originalConfigFileName = configFileName + ".original";
if (!QFile::exists(originalConfigFileName)) {
reply = ActionReply::HelperErrorReply();
reply.addData("errorDescription", i18nc("@info", "Original configuration file <filename>%1</filename> does not exist.", originalConfigFileName));
return reply;
}
if (!QFile::remove(configFileName)) {
reply = ActionReply::HelperErrorReply();
reply.addData("errorDescription", i18nc("@info", "Cannot remove current configuration file <filename>%1</filename>.", configFileName));
return reply;
}
if (!QFile::copy(originalConfigFileName, configFileName)) {
reply = ActionReply::HelperErrorReply();
reply.addData("errorDescription", i18nc("@info", "Cannot copy original configuration file <filename>%1</filename> to <filename>%2</filename>.", originalConfigFileName, configFileName));
return reply;
}
return reply;
}
ActionReply SambaHelper::mount(QVariantMap args)
{
QString ip = args["ip"].toString();
QString uid = args["uid"].toString();
QString sambaDir = args["sambaDir"].toByteArray();
QString mountPoint = args["mountPoint"].toByteArray();
QString locale = args["locale"].toString();
QString path = args["path"].toString();
QString username = args["username"].toString();
QString password = args["password"].toString();
setenv("LANG", locale.toLocal8Bit(), 1);
setenv("PATH", path.toLocal8Bit(), 1);
setlocale(LC_CTYPE, locale.toLocal8Bit());
QProcess proc;
proc.start("samba-realmounter", {ip, sambaDir, mountPoint, uid, username, password });
proc.waitForFinished();
ActionReply reply;
reply.addData("output", proc.readAllStandardOutput());
reply.addData("error", proc.readAllStandardError());
reply.addData("exitCode", proc.exitCode());
return reply;
}
ActionReply Helper::install(QVariantMap args)
{
ActionReply reply;
QString partition = args.value("partition").toString();
QString mountPoint = args.value("mountPoint").toString();
bool mbrInstall = args.value("mbrInstall").toBool();
if (mountPoint.isEmpty()) {
for (int i = 0; QDir(mountPoint = QString("%1/kcm-grub2-%2").arg(QDir::tempPath(), QString::number(i))).exists(); i++);
if (!QDir().mkpath(mountPoint)) {
reply = ActionReply::HelperErrorReply();
reply.addData("errorDescription", i18nc("@info", "Failed to create temporary mount point."));
return reply;
}
ActionReply mountReply = executeCommand(QStringList() << "mount" << partition << mountPoint);
if (mountReply.failed()) {
return mountReply;
}
}
QStringList grub_installCommand;
grub_installCommand << GRUB_INSTALL_EXE << "--root-directory" << mountPoint;
if (mbrInstall) {
grub_installCommand << partition.remove(QRegExp("\\d+"));
} else {
grub_installCommand << "--force" << partition;
}
return executeCommand(grub_installCommand);
}
ActionReply WritableFilesystemHelper::detect(const QVariantMap &args)
{
Q_UNUSED(args)
ActionReply reply = ActionReply::SuccessReply();
reply.addData("writable", QFile::exists("/userdata/.writable_image"));
return reply;
}
ActionReply Helper::executeCommand(const QStringList &command)
{
KProcess process;
process.setProgram(command);
process.setOutputChannelMode(KProcess::MergedChannels);
qDebug() << "Executing" << command.join(" ");
int exitCode = process.execute();
ActionReply reply;
if (exitCode != 0) {
reply = ActionReply::HelperErrorReply();
//TO BE FIXED
reply.setErrorCode(ActionReply::Error::InvalidActionError);
}
reply.addData("command", command);
reply.addData("output", process.readAll());
return reply;
}
ActionReply Helper::save(const QVariantMap& args)
{
ActionReply reply;
QVariantMap files = args["files"].toMap();
for(QVariantMap::const_iterator iter = files.begin(); iter != files.end(); ++iter)
{
QString contents = iter.value().toString();
QFile file(args["etcDir"].toString() + "/" + iter.key());
if (!file.open(QIODevice::WriteOnly | QIODevice::Text)) {
reply = ActionReply::HelperErrorReply();
reply.addData("errorDescription", file.errorString());
// reply.setErrorCode(file.error());
reply.addData("filename", iter.key());
return reply;
}
QTextStream stream(&file);
stream << contents;
file.close();
}
// return a reply
return reply;
}
ActionReply Helper::probe(QVariantMap args)
{
ActionReply reply;
QStringList mountPoints = args.value("mountPoints").toStringList();
QStringList grubPartitions;
HelperSupport::progressStep(0);
for (int i = 0; i < mountPoints.size(); i++) {
ActionReply grub_probeReply = executeCommand(QStringList() << GRUB_PROBE_EXE << "-t" << "drive" << mountPoints.at(i));
if (grub_probeReply.failed()) {
return grub_probeReply;
}
grubPartitions.append(grub_probeReply.data().value("output").toString().trimmed());
HelperSupport::progressStep((i + 1) * 100. / mountPoints.size());
}
reply.addData("grubPartitions", grubPartitions);
return reply;
}
ActionReply MyHelper::read(QVariantMap args)
{
ActionReply reply;
QString filename = args["filename"].toString();
QFile file(filename);
if (!file.open(QIODevice::ReadOnly)) {
reply = ActionReply::HelperErrorReply;
reply.setErrorCode(file.error());
return reply;
}
QTextStream stream(&file);
QString contents;
contents = stream.readAll();
reply.addData("contents", contents);
return reply;
}
ActionReply Helper::load(QVariantMap args)
{
ActionReply reply;
QString fileName;
switch (args.value("grubFile").toInt()) {
case GrubMenuFile:
fileName = GRUB_MENU;
break;
case GrubConfigurationFile:
fileName = GRUB_CONFIG;
break;
case GrubEnvironmentFile:
fileName = GRUB_ENV;
break;
//Security
case GrubGroupFile:
fileName = GRUB_CONFIGDIR + args.value("groupFile").toString();
if (args.value("groupFile").toString() == GRUB_SECURITY) {
if (!QFile::exists(fileName))
executeCommand(QStringList() << "touch" << fileName);
bool security = QFile::exists(fileName);
reply.addData("security", security);
reply.addData("securityOn", (bool)(QFile::permissions(fileName) & (QFile::ExeOwner | QFile::ExeGroup | QFile::ExeOther)));
if (!security)
qDebug() << "Unable to create" << fileName << ", please check file permissions.";
}
break;
case GrubMemtestFile:
bool memtest = QFile::exists(GRUB_MEMTEST);
reply.addData("memtest", memtest);
if (memtest) {
reply.addData("memtestOn", (bool)(QFile::permissions(GRUB_MEMTEST) & (QFile::ExeOwner | QFile::ExeGroup | QFile::ExeOther)));
}
return reply;
}
QFile file(fileName);
if (!file.open(QIODevice::ReadOnly | QIODevice::Text)) {
reply = ActionReply::HelperErrorReply();
reply.addData("errorDescription", file.errorString());
return reply;
}
reply.addData("rawFileContents", file.readAll());
return reply;
}
ActionReply Helper::probevbe(QVariantMap args)
{
Q_UNUSED(args)
ActionReply reply;
#if HAVE_HD
QStringList gfxmodes;
hd_data_t hd_data;
memset(&hd_data, 0, sizeof(hd_data));
hd_t *hd = hd_list(&hd_data, hw_framebuffer, 1, NULL);
for (hd_res_t *res = hd->res; res; res = res->next) {
if (res->any.type == res_framebuffer) {
gfxmodes += QString("%1x%2x%3").arg(QString::number(res->framebuffer.width), QString::number(res->framebuffer.height), QString::number(res->framebuffer.colorbits));
}
}
hd_free_hd_list(hd);
hd_free_hd_data(&hd_data);
reply.addData("gfxmodes", gfxmodes);
#else
reply = ActionReply::HelperErrorReply();
#endif
return reply;
}
ActionReply Helper::save(QVariantMap args)
{
ActionReply reply;
QString configFileName = GRUB_CONFIG;
QByteArray rawConfigFileContents = args.value("rawConfigFileContents").toByteArray();
QByteArray rawDefaultEntry = args.value("rawDefaultEntry").toByteArray();
bool memtest = args.value("memtest").toBool();
bool security = args.value("security").toBool();
QFile::copy(configFileName, configFileName + ".original");
QFile file(configFileName);
if (!file.open(QIODevice::WriteOnly | QIODevice::Text)) {
reply = ActionReply::HelperErrorReply();
reply.addData("errorDescription", file.errorString());
return reply;
}
file.write(rawConfigFileContents);
file.close();
if (args.contains("memtest")) {
QFile::Permissions permissions = QFile::permissions(GRUB_MEMTEST);
if (memtest) {
permissions |= (QFile::ExeOwner | QFile::ExeUser | QFile::ExeGroup | QFile::ExeOther);
} else {
permissions &= ~(QFile::ExeOwner | QFile::ExeUser | QFile::ExeGroup | QFile::ExeOther);
}
QFile::setPermissions(GRUB_MEMTEST, permissions);
}
if (args.contains("security")) {
QString filePath(QString(GRUB_CONFIGDIR)+QString(GRUB_SECURITY));
QFile::Permissions permissions = QFile::permissions(filePath);
if (security) {
permissions |= (QFile::ExeOwner | QFile::ExeUser | QFile::ExeGroup | QFile::ExeOther);
} else {
permissions &= ~(QFile::ExeOwner | QFile::ExeUser | QFile::ExeGroup | QFile::ExeOther);
}
QFile::setPermissions(filePath, permissions);
}
if (args.contains("securityUsers")) {
QByteArray rawUsersFileContents = args.value("securityUsers").toByteArray();
//qDebug() << rawUsersFileContents;
QFile usersFile(QString(GRUB_CONFIGDIR)+QString(GRUB_SECURITY));
usersFile.open(QIODevice::WriteOnly | QIODevice::Text);
usersFile.write(rawUsersFileContents);
usersFile.close();
}
if (args.contains("securityGroupsList")) {
QStringList groupFilesList = args.value("securityGroupsList").toString().split("/");
for ( int i=0; i<groupFilesList.count(); ++i ) {
QByteArray rawGroupFileContent = args.value(QString("GroupContent_")+groupFilesList[i]).toByteArray();
//qDebug() << groupFilesList[i] << rawGroupFileContent;
QFile groupFile(QString(GRUB_CONFIGDIR)+groupFilesList[i]);
groupFile.open(QIODevice::WriteOnly | QIODevice::Text);
groupFile.write(rawGroupFileContent);
groupFile.close();
}
//qDebug() << "Groups modified :" << groupFilesList;
}
ActionReply grub_mkconfigReply = executeCommand(QStringList() << GRUB_MKCONFIG_EXE << "-o" << GRUB_MENU);
if (grub_mkconfigReply.failed()) {
return grub_mkconfigReply;
}
ActionReply grub_set_defaultReply = executeCommand(QStringList() << GRUB_SET_DEFAULT_EXE << rawDefaultEntry);
if (grub_set_defaultReply.failed()) {
return grub_set_defaultReply;
}
return grub_mkconfigReply;
}