AliGenerator* HijingParam() {
AliGenHIJINGpara *gener = new AliGenHIJINGpara(2000);
gener->SetMomentumRange(0,999);
gener->SetPhiRange(0,360);
gener->SetThetaRange(171, 179);
gGener = gener;
return gener;
}
void Config()
{
// ThetaRange is (0., 180.). It was (0.28,179.72) 7/12/00 09:00
// Theta range given through pseudorapidity limits 22/6/2001
// Set Random Number seed
//gRandom->SetSeed(123456); // Set 0 to use the current time
AliLog::Message(AliLog::kInfo, Form("Seed for random number generation = %d",gRandom->GetSeed()), "Config.C", "Config.C", "Config()","Config.C", __LINE__);
// Load Pythia libraries
LoadPythia();
// Libraries required by geant321
Bool_t isFluka = kTRUE;
if (isFluka) {
gSystem->Load("libGeom");
cout << "\t* Loading TFluka..." << endl;
gSystem->Load("libfluka");
cout << "\t* Instantiating TFluka..." << endl;
new TFluka("C++ Interface to Fluka", 0/*verbositylevel*/);
}
else {
cout << "\t* Loading Geant3..." << endl;
gSystem->Load("libgeant321");
cout << "\t* Instantiating Geant3TGeo..." << endl;
new TGeant3TGeo("C++ Interface to Geant3");
}
AliRunLoader* rl=0x0;
AliLog::Message(AliLog::kInfo, "Creating Run Loader", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
rl = AliRunLoader::Open("galice.root",
AliConfig::GetDefaultEventFolderName(),
"recreate");
if (rl == 0x0)
{
gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
return;
}
rl->SetCompressionLevel(2);
rl->SetNumberOfEventsPerFile(3);
gAlice->SetRunLoader(rl);
// gAlice->SetGeometryFromFile("geometry.root");
// Uncomment if you want to load geometry from OCDB! >>>>
/*
if(!AliCDBManager::Instance()->IsDefaultStorageSet()){
cout << "#####################################################" << endl;
cout << "# #" << endl;
cout << "# WARNING: CDB DEFAULT STORAGE NOT SET !!! #" << endl;
cout << "# SETTING IT TO local://$ALICE_ROOT/OCDB !!! #" << endl;
cout << "# #" << endl;
cout << "#####################################################" << endl;
AliCDBManager::Instance()->SetDefaultStorage("local://$ALICE_ROOT/OCDB");
}
if(AliCDBManager::Instance()->GetRun() < 0){
cout << "#####################################################" << endl;
cout << "# #" << endl;
cout << "# WARNING: RUN NUMBER NOT SET !!! #" << endl;
cout << "# SETTING IT TO 0 !!! #" << endl;
cout << "# #" << endl;
cout << "#####################################################" << endl;
AliCDBManager::Instance()->SetRun(0);
}
gAlice->SetGeometryFromCDB();
*/
// Uncomment if you want to load geometry from OCDB! <<<<
// Set the trigger configuration
AliSimulation::Instance()->SetTriggerConfig("Pb-Pb");
cout<<"Trigger configuration is set to Pb-Pb"<<endl;
//
// Set External decayer
TVirtualMCDecayer *decayer = new AliDecayerPythia();
decayer->SetForceDecay(kAll);
decayer->Init();
gMC->SetExternalDecayer(decayer);
//=======================================================================
// ************* STEERING parameters FOR ALICE SIMULATION **************
// --- Specify event type to be tracked through the ALICE setup
// --- All positions are in cm, angles in degrees, and P and E in GeV
gMC->SetProcess("DCAY",1);
gMC->SetProcess("PAIR",1);
gMC->SetProcess("COMP",1);
gMC->SetProcess("PHOT",1);
gMC->SetProcess("PFIS",0);
gMC->SetProcess("DRAY",0);
gMC->SetProcess("ANNI",1);
gMC->SetProcess("BREM",1);
gMC->SetProcess("MUNU",1);
gMC->SetProcess("CKOV",1);
gMC->SetProcess("HADR",1);
gMC->SetProcess("LOSS",2);
gMC->SetProcess("MULS",1);
gMC->SetProcess("RAYL",1);
Float_t cut = 1.e-3; // 1MeV cut by default
Float_t tofmax = 1.e10;
gMC->SetCut("CUTGAM", cut);
gMC->SetCut("CUTELE", cut);
gMC->SetCut("CUTNEU", cut);
gMC->SetCut("CUTHAD", cut);
gMC->SetCut("CUTMUO", cut);
gMC->SetCut("BCUTE", cut);
gMC->SetCut("BCUTM", cut);
gMC->SetCut("DCUTE", cut);
gMC->SetCut("DCUTM", cut);
gMC->SetCut("PPCUTM", cut);
gMC->SetCut("TOFMAX", tofmax);
int nParticles = 100;
if (gSystem->Getenv("CONFIG_NPARTICLES"))
{
nParticles = atoi(gSystem->Getenv("CONFIG_NPARTICLES"));
}
AliGenCocktail *gener = new AliGenCocktail();
gener->SetPhiRange(0, 360);
// Set pseudorapidity range from -8 to 8.
Float_t thmin = EtaToTheta(8); // theta min. <---> eta max
Float_t thmax = EtaToTheta(-8); // theta max. <---> eta min
gener->SetThetaRange(thmin,thmax);
gener->SetOrigin(0, 0, 0); //vertex position
gener->SetSigma(0, 0, 0); //Sigma in (X,Y,Z) (cm) on IP position
AliGenHIJINGpara *hijingparam = new AliGenHIJINGpara(nParticles);
hijingparam->SetMomentumRange(0.2, 999);
gener->AddGenerator(hijingparam,"HIJING PARAM",1);
// AliGenBox *genbox = new AliGenBox(nParticles);
// genbox->SetPart(kGamma);
// genbox->SetPtRange(0.3, 10.00);
// gener->AddGenerator(genbox,"GENBOX GAMMA for PHOS",1);
gener->Init();
//
// Activate this line if you want the vertex smearing to happen
// track by track
//
//gener->SetVertexSmear(perTrack);
// Field (L3 0.4 T)
TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", -1., -1., AliMagF::k5kG));
Int_t iABSO = 1;
Int_t iDIPO = 1;
Int_t iFMD = 1;
Int_t iFRAME = 1;
Int_t iHALL = 1;
Int_t iITS = 1;
Int_t iMAG = 1;
Int_t iMUON = 1;
Int_t iPHOS = 1;
Int_t iPIPE = 1;
Int_t iPMD = 1;
Int_t iHMPID = 1;
Int_t iSHIL = 1;
Int_t iT0 = 1;
Int_t iTOF = 1;
Int_t iTPC = 1;
Int_t iTRD = 1;
Int_t iZDC = 1;
Int_t iEMCAL = 1;
Int_t iACORDE = 1;
Int_t iVZERO = 1;
rl->CdGAFile();
//=================== Alice BODY parameters =============================
AliBODY *BODY = new AliBODY("BODY", "Alice envelop");
if (iMAG)
{
//=================== MAG parameters ============================
// --- Start with Magnet since detector layouts may be depending ---
// --- on the selected Magnet dimensions ---
AliMAG *MAG = new AliMAG("MAG", "Magnet");
}
if (iABSO)
{
//=================== ABSO parameters ============================
AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
}
if (iDIPO)
{
//=================== DIPO parameters ============================
AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
}
if (iHALL)
{
//=================== HALL parameters ============================
AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
}
if (iFRAME)
{
//=================== FRAME parameters ============================
AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
FRAME->SetHoles(1);
}
if (iSHIL)
{
//=================== SHIL parameters ============================
AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
}
if (iPIPE)
{
//=================== PIPE parameters ============================
AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
}
if (iITS)
{
//=================== ITS parameters ============================
AliITS *ITS = new AliITSv11("ITS","ITS v11");
}
if (iTPC)
{
//============================ TPC parameters ===================
AliTPC *TPC = new AliTPCv2("TPC", "Default");
TPC->SetPrimaryIonisation();
}
if (iTOF) {
//=================== TOF parameters ============================
AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
}
if (iHMPID)
{
//=================== HMPID parameters ===========================
AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");
}
if (iZDC)
{
//=================== ZDC parameters ============================
AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
}
if (iTRD)
{
//=================== TRD parameters ============================
AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
}
if (iFMD)
{
//=================== FMD parameters ============================
AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
}
if (iMUON)
{
//=================== MUON parameters ===========================
// New MUONv1 version (geometry defined via builders)
AliMUON *MUON = new AliMUONv1("MUON", "default");
}
//=================== PHOS parameters ===========================
if (iPHOS)
{
AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
}
if (iPMD)
{
//=================== PMD parameters ============================
AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
}
if (iT0)
{
//=================== T0 parameters ============================
AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
}
if (iEMCAL)
{
//=================== EMCAL parameters ============================
AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
}
if (iACORDE)
{
//=================== ACORDE parameters ============================
AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
}
if (iVZERO)
{
//=================== VZERO parameters ============================
AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
}
AliLog::Message(AliLog::kInfo, "End of Config", "Config.C", "Config.C", "Config()"," Config.C", __LINE__);
}