예제 #1
0
void Config()
{
    

  // Get settings from environment variables
  ProcessEnvironmentVars();

  gRandom->SetSeed(seed);
  cerr<<"Seed for random number generation= "<<seed<<endl; 

  // Libraries required by geant321
#if defined(__CINT__)
  gSystem->Load("liblhapdf");      // Parton density functions
  gSystem->Load("libEG");
  gSystem->Load("libEGPythia6");   // TGenerator interface
  gSystem->Load("libpythia6");     // Pythia
  gSystem->Load("libAliPythia6");  // ALICE specific implementations
  gSystem->Load("libgeant321");
  gSystem->Load("libTTherminator");
#endif

  new TGeant3TGeo("C++ Interface to Geant3");

  //=======================================================================
  //  Create the output file

   
  AliRunLoader* rl=0;;

  cout<<"Config.C: Creating Run Loader ..."<<endl;
//  rl = AliRunLoader::Open("galice.root");
  rl = AliRunLoader::Open("galice.root",
			  AliConfig::GetDefaultEventFolderName(),
			  "recreate");
    if (rl == 0x0)
    {
      gAlice->Fatal("Config.C","Can not instatiate the Run Loader");
      return;
    }
  rl->SetCompressionLevel(2);
  rl->SetNumberOfEventsPerFile(10000);
  gAlice->SetRunLoader(rl);
  
  
  // Set the trigger configuration
  if ((embedrun == kBackground) || (embedrun == kMerged)) {
//    AliSimulation::Instance()->SetTriggerConfig("Pb-Pb");
		AliSimulation::Instance()->SetTriggerConfig("");
    cout<<"Trigger configuration is set to  Pb-Pb"<<endl;
  }
  else {
    // Set the trigger configuration: proton-proton
    //    AliSimulation::Instance()->SetTriggerConfig("p-p");
    AliSimulation::Instance()->SetTriggerConfig("Pb-Pb");
    cout<<"Trigger configuration is set to  Pb-Pb"<<endl;
  }

  //
  // Set External decayer
  TVirtualMCDecayer *decayer = new AliDecayerPythia();
  
  decayer->SetForceDecay(kAll);
  decayer->Init();
  gMC->SetExternalDecayer(decayer);
  //=======================================================================
  // ************* STEERING parameters FOR ALICE SIMULATION **************
  // --- Specify event type to be tracked through the ALICE setup
  // --- All positions are in cm, angles in degrees, and P and E in GeV
  
  
  gMC->SetProcess("DCAY",1);
  gMC->SetProcess("PAIR",1);
  gMC->SetProcess("COMP",1);
  gMC->SetProcess("PHOT",1);
  gMC->SetProcess("PFIS",0);
  gMC->SetProcess("DRAY",0);
  gMC->SetProcess("ANNI",1);
  gMC->SetProcess("BREM",1);
  gMC->SetProcess("MUNU",1);
  gMC->SetProcess("CKOV",1);
  gMC->SetProcess("HADR",1);
  gMC->SetProcess("LOSS",2);
  gMC->SetProcess("MULS",1);
  gMC->SetProcess("RAYL",1);
  
  Float_t cut = 1.e-3;        // 1MeV cut by default
  Float_t tofmax = 1.e10;
  
  gMC->SetCut("CUTGAM", cut);
  gMC->SetCut("CUTELE", cut);
  gMC->SetCut("CUTNEU", cut);
  gMC->SetCut("CUTHAD", cut);
  gMC->SetCut("CUTMUO", cut);
  gMC->SetCut("BCUTE",  cut); 
  gMC->SetCut("BCUTM",  cut); 
  gMC->SetCut("DCUTE",  cut); 
  gMC->SetCut("DCUTM",  cut); 
  gMC->SetCut("PPCUTM", cut);
  gMC->SetCut("TOFMAX", tofmax); 
  
  //======================//
  // Set External decayer //
  //======================//
  TVirtualMCDecayer* decayer = new AliDecayerPythia();
  decayer->SetForceDecay(kAll);
  decayer->Init();
  gMC->SetExternalDecayer(decayer);
  
  if ((embedrun == kMerged) || (embedrun == kSignal) || (embedrun == kBackground)) {
    //=========================//
    // Generator Configuration //
    //=========================//
    AliGenerator* gener = 0x0;
    if (proc == kPythia6) {
      gener = MbPythia();
    } else if (proc == kPhojet) {
      gener = MbPhojet();
    } else if (proc == kJPsiPbPb) {
      gener = JPsiPbPb();
    } else if (proc == kJPsiPbPb2760) {
      gener = JPsiPbPb2760();
    } else if (proc == kJPsiHptPbPb2760) {
      gener = JPsiHptPbPb2760();
    } else if (proc == kBSignalPbPb2760) {
      gener = BSignalPbPb2760();
    }
    
  }
  else {
    AliGenCocktail *gener = new AliGenCocktail();
    gener->SetPhiRange(0, 360);
    // Set pseudorapidity range from -8 to 8.
    Float_t thmin = EtaToTheta(1);   // theta min. <---> eta max
    Float_t thmax = EtaToTheta(-1);  // theta max. <---> eta min 
    gener->SetThetaRange(thmin,thmax);
    gener->SetProjectile("A",208,82);
    gener->SetTarget("A",208,82);

    AliGenTherminator *genther = new AliGenTherminator();
    genther->SetFileName("event.out");
    genther->SetEventNumberInFile(1);
    genther->SetTemperature(0.145);
    genther->SetMiuI(-0.0009);
    genther->SetMiuS(0.000);
    genther->SetMiuB(0.0008);
    genther->SetAlfaRange(8.0);
    genther->SetRapRange(4.0);
    genther->SetRhoMax(7.74);
    genther->SetTau(9.74);
    genther->SetModel("Lhyquid3D");
    genther->SetLhyquidSet("LHC500C2030");

    gener->AddGenerator(genther, "THERMINATOR LHYQUID3D", 1);
  }
  
  
/*
  // PRIMARY VERTEX
  //
  gener->SetOrigin(0., 0., 0.);    // vertex position
  //
  //
  // Size of the interaction diamond
  // Longitudinal
  Float_t sigmaz;

  if (embedrun == kBackground) {
    sigmaz  = 7.55 / TMath::Sqrt(2.); // [cm]
  }
  else {
    Float_t sigmaz  = 5.4 / TMath::Sqrt(2.); // [cm]
    if (energy == 900)
      sigmaz  = 10.5 / TMath::Sqrt(2.); // [cm]
  }

  //
  // Transverse
  Float_t betast  = 10;                 // beta* [m]
  Float_t eps     = 3.75e-6;            // emittance [m]
  Float_t gamma   = energy / 2.0 / 0.938272;  // relativistic gamma [1]
  Float_t sigmaxy = TMath::Sqrt(eps * betast / gamma) / TMath::Sqrt(2.) * 100.;  // [cm]
  printf("\n \n Diamond size x-y: %10.3e z: %10.3e\n \n", sigmaxy, sigmaz);
    
  gener->SetSigma(sigmaxy, sigmaxy, sigmaz);      // Sigma in (X,Y,Z) (cm) on IP position
  gener->SetCutVertexZ(3.);        // Truncate at 3 sigma
  gener->SetVertexSmear(kPerEvent);
*/

  // PRIMARY VERTEX (will be overwritten by ip from real event)
  //
  gener->SetOrigin(0., 0., 0.);    // vertex position
  gener->SetSigma(0., 0., 0.); //Sigma in (X,Y,Z) (cm) on IP position
  gener->Init();

/*	
// Taken from GRP instead
  // FIELD
  //
// Field

    //  AliMagF* field = 0x0;
  if (mag == kNoField) {
    comment = comment.Append(" | L3 field 0.0 T");
    TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", 0., 0., AliMagF::k5kGUniform));
  } else if (mag == k5kG) {
    comment = comment.Append(" | L3 field 0.5 T");
    TGeoGlobalMagField::Instance()->SetField(new AliMagF("Maps","Maps", -1., -1., AliMagF::k5kG));
  }
  printf("\n \n Comment: %s \n \n", comment.Data());
  //  TGeoGlobalMagField::Instance()->SetField(field);
*/    
  rl->CdGAFile();
  
  Int_t iABSO  = 1;
  Int_t iACORDE= 0;
  Int_t iDIPO  = 1;
  Int_t iEMCAL = 0;
  Int_t iFMD   = 1;
  Int_t iFRAME = 1;
  Int_t iHALL  = 1;
  Int_t iITS   = 1;
  Int_t iMAG   = 1;
  Int_t iMUON  = 1;
  Int_t iPHOS  = 0;
  Int_t iPIPE  = 1;
  Int_t iPMD   = 0;
  Int_t iHMPID = 0;
  Int_t iSHIL  = 1;
  Int_t iT0    = 0;
  Int_t iTOF   = 0;
  Int_t iTPC   = 0;
  Int_t iTRD   = 0;
  Int_t iVZERO = 1;
  Int_t iZDC   = 0;
  

    //=================== Alice BODY parameters =============================
    AliBODY *BODY = new AliBODY("BODY", "Alice envelop");


    if (iMAG)
    {
        //=================== MAG parameters ============================
        // --- Start with Magnet since detector layouts may be depending ---
        // --- on the selected Magnet dimensions ---
        AliMAG *MAG = new AliMAG("MAG", "Magnet");
    }


    if (iABSO)
    {
        //=================== ABSO parameters ============================
        AliABSO *ABSO = new AliABSOv3("ABSO", "Muon Absorber");
    }

    if (iDIPO)
    {
        //=================== DIPO parameters ============================

        AliDIPO *DIPO = new AliDIPOv3("DIPO", "Dipole version 3");
    }

    if (iHALL)
    {
        //=================== HALL parameters ============================

        AliHALL *HALL = new AliHALLv3("HALL", "Alice Hall");
    }


    if (iFRAME)
    {
        //=================== FRAME parameters ============================

        AliFRAMEv2 *FRAME = new AliFRAMEv2("FRAME", "Space Frame");
	FRAME->SetHoles(1);
    }

    if (iSHIL)
    {
        //=================== SHIL parameters ============================

        AliSHIL *SHIL = new AliSHILv3("SHIL", "Shielding Version 3");
    }


    if (iPIPE)
    {
        //=================== PIPE parameters ============================

        AliPIPE *PIPE = new AliPIPEv3("PIPE", "Beam Pipe");
    }
 
    if (iITS)
    {
        //=================== ITS parameters ============================

//			AliITS *ITS  = new AliITSv11Hybrid("ITS","ITS v11Hybrid");
			AliITS *ITS  = new AliITSv11("ITS","ITS v11");
    }

    if (iTPC)
    {
      //============================ TPC parameters =====================

        AliTPC *TPC = new AliTPCv2("TPC", "Default");
    }


    if (iTOF) {
        //=================== TOF parameters ============================

	AliTOF *TOF = new AliTOFv6T0("TOF", "normal TOF");
    }


    if (iHMPID)
    {
        //=================== HMPID parameters ===========================

        AliHMPID *HMPID = new AliHMPIDv3("HMPID", "normal HMPID");

    }


    if (iZDC)
    {
        //=================== ZDC parameters ============================

        AliZDC *ZDC = new AliZDCv3("ZDC", "normal ZDC");
    }

    if (iTRD)
    {
        //=================== TRD parameters ============================

        AliTRD *TRD = new AliTRDv1("TRD", "TRD slow simulator");
    }

    if (iFMD)
    {
        //=================== FMD parameters ============================

	AliFMD *FMD = new AliFMDv1("FMD", "normal FMD");
   }

    if (iMUON)
    {
        //=================== MUON parameters ===========================
        // New MUONv1 version (geometry defined via builders)
      const char* digitstore="AliMUONDigitStoreV2S";
      AliMUON *MUON = new AliMUONv1("MUON", "default");
      // activate trigger efficiency by cells
      MUON->SetTriggerEffCells(1);
      if (embedrun == kBackground) {
      	 digitstore="AliMUONDigitStoreV2R";
	 MUON->SetConvertTrigger(true);
      }
      MUON->SetDigitStoreClassName(digitstore);
      
      cout << "MUON DigitStore is " << MUON->DigitStoreClassName().Data() << endl;
      
      // Noise-only digits in tracker/trigger (0=no noise, 1=default (noise in tracker), 2=noise in tracker and trigger):
      cout << "****** DISABLING NOISE GENERATION AS WE DO EMBEDDING ******" << endl;
      MUON->SetDigitizerWithNoise(0);     

    }

    if (iPHOS)
    {
        //=================== PHOS parameters ===========================
        AliPHOS *PHOS = new AliPHOSv1("PHOS", "IHEP");
    }


    if (iPMD)
    {
        //=================== PMD parameters ============================

        AliPMD *PMD = new AliPMDv1("PMD", "normal PMD");
    }

    if (iT0)
    {
        //=================== T0 parameters ============================
        AliT0 *T0 = new AliT0v1("T0", "T0 Detector");
    }

    if (iEMCAL)
    {
        //=================== EMCAL parameters ============================

        AliEMCAL *EMCAL = new AliEMCALv2("EMCAL", "EMCAL_COMPLETE");
    }

     if (iACORDE)
    {
        //=================== ACORDE parameters ============================

        AliACORDE *ACORDE = new AliACORDEv1("ACORDE", "normal ACORDE");
    }

     if (iVZERO)
    {
        //=================== ACORDE parameters ============================

        AliVZERO *VZERO = new AliVZEROv7("VZERO", "normal VZERO");
    }
}