예제 #1
0
void SensorDetectPopup::popupClosed(ArTypes::Byte4 popupID, int button)
{
  // A client closed the popup
  ArLog::log(ArLog::Normal, "popupExample: a client closed popup dialog window with id=%d. Button=%d...", popupID, button);
  myPopupDisplayed = false;

  if(button < 0)
  {
    ArLog::log(ArLog::Normal, "\t...popup timed out or closed due to an error.");
    return;
  }

  if (button == 0)
  {
    ArLog::log(ArLog::Normal, "\t...OK pressed.");
    return;
  }

  if(button == 1)
  {
    ArLog::log(ArLog::Normal, "\t...180 degree rotate requested.");
    myRobot->lock();
    myRobot->setDeltaHeading(180);
    myRobot->unlock();
    return;
  }

  if(button == 2)
  {
    ArLog::log(ArLog::Normal, "\t...exit requested.");
    myRobot->stopRunning();
    Aria::shutdown();
    Aria::exit(0);
  }
}
예제 #2
0
void laserRequest_and_odom(ArServerClient *client, ArNetPacket *packet)
{ 
  robot.lock();
  ArNetPacket sending;
  sending.empty();
  ArLaser* laser = robot.findLaser(1);
  if(!laser){
      printf("Could not connect to Laser... exiting\n");
      Aria::exit(1);}	
  laser->lockDevice();
  const std::list<ArSensorReading*> *sensorReadings = laser->getRawReadings(); // see ArRangeDevice interface doc
  sending.byte4ToBuf((ArTypes::Byte4)(sensorReadings->size()));
  for (std::list<ArSensorReading*>::const_iterator it2= sensorReadings->begin(); it2 != sensorReadings->end(); ++it2){
	ArSensorReading* laserRead =*it2;
        sending.byte4ToBuf((ArTypes::Byte4)(laserRead->getRange()));
	//printf("%i,%i:",laserRead->getRange(),laserRead->getIgnoreThisReading());
  }
  sending.byte4ToBuf((ArTypes::Byte4)(robot.getX()));
  sending.byte4ToBuf((ArTypes::Byte4)(robot.getY()));
  sending.byte4ToBuf((ArTypes::Byte4)(robot.getTh()));
  sending.byte4ToBuf((ArTypes::Byte4)(robot.getVel()));
  sending.byte4ToBuf((ArTypes::Byte4)(robot.getRotVel()));
  //printf("%1f,%1f,%1f\n",robot.getX(),robot.getY(),robot.getTh());
  laser->unlockDevice();
  robot.unlock();
  sending.finalizePacket();
  //sending.printHex();
  client->sendPacketTcp(&sending);
}
예제 #3
0
bool RosAriaNode::disable_motors_cb(std_srvs::Empty::Request& request, std_srvs::Empty::Response& response)
{
    ROS_INFO("RosAria: Disable motors request.");
    robot->lock();
    robot->disableMotors();
    robot->unlock();
	// todo could wait and see if motors do become disabled, and send a response with an error flag if not
    return true;
}
예제 #4
0
bool RosAriaNode::enable_motors_cb(std_srvs::Empty::Request& request, std_srvs::Empty::Response& response)
{
    ROS_INFO("RosAria: Enable motors request.");
    robot->lock();
    if(robot->isEStopPressed())
        ROS_WARN("RosAria: Warning: Enable motors requested, but robot also has E-Stop button pressed. Motors will not enable.");
    robot->enableMotors();
    robot->unlock();
	// todo could wait and see if motors do become enabled, and send a response with an error flag if not
    return true;
}
예제 #5
0
int main(int argc, char **argv)
{
  Aria::init();
  ArRobot robot;

  ArSerialConnection serialConnection;
  ArTcpConnection tcpConnection;
    
  if (tcpConnection.open("localhost", 8101)) {
    robot.setDeviceConnection(&tcpConnection);
  } else {
    serialConnection.setPort("/dev/ttyUSB0");
    robot.setDeviceConnection(&serialConnection);
  }
  robot.blockingConnect();
   
  printf("Setting robot to run async\n");
  robot.runAsync(false);

  printf("Turning off sound\n");
  robot.comInt(ArCommands::SOUNDTOG, 0);

  printf("Enabling motors\n");
  robot.enableMotors();

  // add a set of actions that combine together to effect the wander behavior
  /*ArActionStallRecover recover;
  ArActionBumpers bumpers;
  ArActionAvoidFront avoidFrontNear("Avoid Front Near", 225, 0);
  ArActionAvoidFront avoidFrontFar;
  ArActionConstantVelocity constantVelocity("Constant Velocity", 400);
  robot.addAction(&recover, 100);
  robot.addAction(&bumpers, 75);
  robot.addAction(&avoidFrontNear, 50);
  robot.addAction(&avoidFrontFar, 49);
  robot.addAction(&constantVelocity, 25);*/

  printf("Locking\n");
  robot.lock();
  robot.setVel(100.0);
  robot.unlock();
  printf("Sleeping\n");
  ArUtil::sleep(3*1000);
  printf("Awake\n");

  
  // wait for robot task loop to end before exiting the program
  //while (true);
  //robot.waitForRunExit();
  

  Aria::exit(0);
  return 0;
}
예제 #6
0
int main(int argc, char **argv) 
{
  std::string str;
  int ret;
  ArTime start;
  
  // connection to the robot
  ArSerialConnection con;
  // the robot
  ArRobot robot;
  // the connection handler from above
  ConnHandler ch(&robot);

  // init area with a dedicated signal handling thread
  Aria::init(Aria::SIGHANDLE_THREAD);

  // open the connection with the defaults, exit if failed
  if ((ret = con.open()) != 0)
  {
    str = con.getOpenMessage(ret);
    printf("Open failed: %s\n", str.c_str());
    Aria::shutdown();
    return 1;
  }

  // set the robots connection
  robot.setDeviceConnection(&con);
  // try to connect, if we fail, the connection handler should bail
  if (!robot.blockingConnect())
  {
    // this should have been taken care of by the connection handler
    // but just in case
    printf(
    "asyncConnect failed because robot is not running in its own thread.\n");
    Aria::shutdown();
    return 1;
  }
  // run the robot in its own thread, so it gets and processes packets and such
  robot.runAsync(false);

  int i;
  while (Aria::getRunning())
  {
    robot.lock();
    robot.comStr(ArCommands::TTY3, "1234567890");
    robot.unlock();
  }

  robot.disconnect();
  // shutdown and ge tout
  Aria::shutdown();
  return 0;
}
예제 #7
0
void RosAriaNode::sonarConnectCb()
{
  robot->lock();
  if (sonar_pub.getNumSubscribers() == 0)
  {
    robot->disableSonar();
    use_sonar = false;
  }
  else
  {
    robot->enableSonar();
    use_sonar = true;
  }
  robot->unlock();
}
예제 #8
0
void
RosAriaNode::cmdvel_cb( const geometry_msgs::TwistConstPtr &msg)
{
  veltime = ros::Time::now();
#ifdef SPEW
  ROS_INFO( "new speed: [%0.2f,%0.2f](%0.3f)", msg->linear.x*1e3, msg->angular.z, veltime.toSec() );
#endif

  robot->lock();
  robot->setVel(msg->linear.x*1e3);
  robot->setRotVel(msg->angular.z*180/M_PI);
  robot->unlock();
  ROS_DEBUG("RosAria: sent vels to to aria (time %f): x vel %f mm/s, y vel %f mm/s, ang vel %f deg/s", veltime.toSec(),
    (double) msg->linear.x * 1e3, (double) msg->linear.y * 1.3, (double) msg->angular.z * 180/M_PI);
}
예제 #9
0
void RosAriaNode::spin()
{
  //ros::spin();

    while(ros::ok()){
               if(ros::WallTime::now()-last_command_time_ > ros::WallDuration(1)){
                   robot->lock();
                   robot->setVel(0.0);
                   if(robot->hasLatVel())
                     robot->setLatVel(0.0);
                   robot->setRotVel(0.0);
                   robot->unlock();
               }
               ros::spinOnce();
           }
}
// this is the function called in the new thread
void *Joydrive::runThread(void *arg)
{
  threadStarted();

  int trans, rot;

  // only run while running, ie play nice and pay attention to the thread 
  //being shutdown
  while (myRunning)
  {
    // lock the robot before touching it
    myRobot->lock();
    if (!myRobot->isConnected())
    {
      myRobot->unlock();
      break;
    }
    // print out some information about the robot
    printf("\rx %6.1f  y %6.1f  tth  %6.1f vel %7.1f mpacs %3d   ", 
	   myRobot->getX(), myRobot->getY(), myRobot->getTh(), 
	   myRobot->getVel(), myRobot->getMotorPacCount());
    fflush(stdout);
    // if one of the joystick buttons is pushed, drive the robot
    if (myJoyHandler.haveJoystick() && (myJoyHandler.getButton(1) ||
					myJoyHandler.getButton(2)))
    {
      // get out the values from the joystick
      myJoyHandler.getAdjusted(&rot, &trans);
      // drive the robot
      myRobot->setVel(trans);
      myRobot->setRotVel(-rot);
    }
    // if no buttons are pushed stop the robot
    else
    {
      myRobot->setVel(0);
      myRobot->setRotVel(0);
    }
    // unlock the robot, so everything else can run
    myRobot->unlock();
    // now take a little nap
    ArUtil::sleep(50);
  }
  // return out here, means the thread is done
  return NULL;
}
예제 #11
0
파일: RosAria.cpp 프로젝트: kpykc/rosaria
/// Called when another node subscribes or unsubscribes from sonar topic.
void RosAriaNode::sonarConnectCb()
{
  publish_sonar = (sonar_pub.getNumSubscribers() > 0);
  publish_sonar_pointcloud2 = (sonar_pointcloud2_pub.getNumSubscribers() > 0);
  robot->lock();
  if (publish_sonar || publish_sonar_pointcloud2)
  {
    robot->enableSonar();
    sonar_enabled = false;
  }
  else if(!publish_sonar && !publish_sonar_pointcloud2)
  {
    robot->disableSonar();
    sonar_enabled = true;
  }
  robot->unlock();
}
예제 #12
0
int main(int argc, char **argv){
	Aria::init();
	ArRobot robot;
	ArArgumentParser parser(&argc, argv);
	ArSimpleConnector connector(& parser);

	parser.loadDefaultArguments();
	Aria::logOptions();
	if (!connector.parseArgs()){
		cout << "Unknown settings\n";
		Aria::exit(0);
		exit(1);
	}

	if (!connector.connectRobot(&robot)){
		cout << "Unable to connect\n";
		Aria::exit(0);
		exit(1);
	}

	robot.runAsync(true);
	robot.lock();
	robot.comInt(ArCommands::ENABLE, 1);
	robot.unlock();



	ArSonarDevice sonar;
	robot.addRangeDevice(&sonar);

	G_id = 0;
	G_SONAR_FD = fopen("../sensors/sonars","w");
	G_pose_fd  = fopen("../sensors/pose","w");
	int numSonar = robot.getNumSonar();
	while(1){
		readPosition(robot);
		readSonars(robot, 8);
		setMotors(robot);
		usleep(20000);
	}

	fclose(G_SONAR_FD);
	fclose(G_pose_fd);
	Aria::exit(0);
}
예제 #13
0
/*
 * To Read the parameter
*/
void RosAriaNode::readParameters()
{
  // Robot Parameters  
  robot->lock();
  ros::NodeHandle n_("~");
  if (n_.hasParam("TicksMM"))
  {
    n_.getParam( "TicksMM", TicksMM);
    ROS_INFO("Setting TicksMM from ROS Parameter: %d", TicksMM);
    robot->comInt(93, TicksMM);
  }
  else
  {
    TicksMM = robot->getOrigRobotConfig()->getTicksMM();
    n_.setParam( "TicksMM", TicksMM);
    ROS_INFO("Setting TicksMM from robot EEPROM: %d", TicksMM);
  }
  
  if (n_.hasParam("DriftFactor"))
  {
    n_.getParam( "DriftFactor", DriftFactor);
    ROS_INFO("Setting DriftFactor from ROS Parameter: %d", DriftFactor);
    robot->comInt(89, DriftFactor);
  }
  else
  {
    DriftFactor = robot->getOrigRobotConfig()->getDriftFactor();
    n_.setParam( "DriftFactor", DriftFactor);
    ROS_INFO("Setting DriftFactor from robot EEPROM: %d", DriftFactor);
  }
  
  if (n_.hasParam("RevCount"))
  {
    n_.getParam( "RevCount", RevCount);
    ROS_INFO("Setting RevCount from ROS Parameter: %d", RevCount);
    robot->comInt(88, RevCount);
  }
  else
  {
    RevCount = robot->getOrigRobotConfig()->getRevCount();
    n_.setParam( "RevCount", RevCount);
    ROS_INFO("Setting RevCount from robot EEPROM: %d", RevCount);
  }
  robot->unlock();
}
예제 #14
0
/*!
 * Shuts down the system.
 *
 */
void
Advanced::shutDown(void)
{
  Aria::exit(0);
  //
  // Stop the path planning thread.
  //
  if(myPathPlanningTask){
    myPathPlanningTask->stopRunning();
//    delete myPathPlanningTask;
    printf("Stopped Path Planning Thread\n");
  }
  //
  // Stop the localization thread.
  //
  if(myLocaTask){
    myLocaTask->stopRunning();
    delete myLocaTask;
    printf("Stopped Localization Thread\n");
  }
  //
  // Stop the laser thread.
  //
  if(mySick)
  {
    mySick->lockDevice();
    mySick->disconnect();
    mySick->unlockDevice();
    printf("Stopped Laser Thread\n");
  }
  //
  // Stop the robot thread.
  //
  myRobot->lock();
  myRobot->stopRunning();
  myRobot->unlock();
  printf("Stopped Robot Thread\n");
  //
  // Exit Aria
  //
  Aria::shutdown();
  printf("Aria Shutdown\n");

}
예제 #15
0
void setMotors(ArRobot& robot){
	TiObj G_motor;
	G_motor.loadFile("../motors/motors");

	if ( G_motor.has("speed") || G_motor.has("rotation") ){
		cout << G_motor;

		robot.lock();
		if ( G_motor.has("speed") )
			robot.setVel( G_motor.atInt("speed") );
		if ( G_motor.has("rotation") ) 
			robot.setRotVel( G_motor.atInt("rotation") );
		robot.unlock();

		FILE* fd = fopen("../motors/motors","w");
		fclose(fd);
	}
	//
}
예제 #16
0
void RosAriaNode::cmdvel_cb( const geometry_msgs::TwistConstPtr &msg)
{
  veltime = ros::WallTime::now();
  last_command_time_=veltime;
  ROS_INFO( "new speed: [%0.2f,%0.2f](%0.3f)", msg->linear.x*1e3, msg->angular.z, veltime.toSec() );

  twistMsg.linear.x=msg->linear.x;
  twistMsg.angular.z=msg->angular.z;
  twist_pub.publish(twistMsg);


  robot->lock();
  robot->setVel(msg->linear.x*1e3);
  if(robot->hasLatVel())
    robot->setLatVel(msg->linear.y*1e3);
  robot->setRotVel(msg->angular.z*180/M_PI);
  robot->unlock();
  ROS_DEBUG("RosAria: sent vels to to aria (time %f): x vel %f mm/s, y vel %f mm/s, ang vel %f deg/s", veltime.toSec(),
    (double) msg->linear.x * 1e3, (double) msg->linear.y * 1.3, (double) msg->angular.z * 180/M_PI);
}
예제 #17
0
/*!
 * Sets up for path planning.
 *
 * @return true if successful.
 */
bool
Advanced::initializePathPlanningTask(void)
{
#ifdef SONARNL
  if(myRobot && mySonar && myMap)
    myPathPlanningTask = new ArPathPlanningTask(myRobot, mySonar,
                        myMap);
#else
  if(myRobot && mySick && mySonar && myMap)
    myPathPlanningTask = new ArPathPlanningTask(myRobot, mySick, mySonar,
                        myMap);
#endif

  if(!myPathPlanningTask){
    return false;
  }else{
    myRobot->lock();
    myRobot->enableMotors();
    myRobot->unlock();
    return true;
  }
}
예제 #18
0
int main(int argc, char *argv[])
{
    // Initialize location of Aria, Arnl and their args.
    Aria::init();
    Arnl::init();


    // The robot object
    ArRobot robot;

    // Parse the command line arguments.
    ArArgumentParser parser(&argc, argv);

    // Read data_index if exists
    int data_index;
    bool exist_data_index;
    parser.checkParameterArgumentInteger("dataIndex",&data_index,&exist_data_index);


    // Load default arguments for this computer (from /etc/Aria.args, environment
    // variables, and other places)
    parser.loadDefaultArguments();


    // Object that connects to the robot or simulator using program options
    ArRobotConnector robotConnector(&parser, &robot);


    // set up a gyro
    ArAnalogGyro gyro(&robot);

    ArLog::init(ArLog::File,ArLog::Normal,"run.log",false,true,true);

    // Parse arguments for the simple connector.
    if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
    {
        ArLog::log(ArLog::Normal, "\nUsage: %s -map mapfilename\n", argv[0]);
        Aria::logOptions();
        Aria::exit(1);
    }

    // Collision avoidance actions at higher priority
    ArActionAvoidFront avoidAction("avoid",200);
    ArActionLimiterForwards limiterAction("speed limiter near", 150, 500, 150);
    ArActionLimiterForwards limiterFarAction("speed limiter far", 300, 1100, 400);
    ArActionLimiterTableSensor tableLimiterAction;
    //robot.addAction(&tableLimiterAction, 100);
    //robot.addAction(&avoidAction,100);
    //robot.addAction(&limiterAction, 95);
    //robot.addAction(&limiterFarAction, 90);

    // Goto action at lower priority
    ArActionGoto gotoPoseAction("goto");
    //robot.addAction(&gotoPoseAction, 50);
    gotoPoseAction.setCloseDist(750);

    // Stop action at lower priority, so the robot stops if it has no goal
    ArActionStop stopAction("stop");
    //robot.addAction(&stopAction, 40);




    // Connect the robot
    if (!robotConnector.connectRobot())
    {
        ArLog::log(ArLog::Normal, "Could not connect to robot... exiting");
        Aria::exit(3);
    }

    if(!robot.isConnected())
    {
        ArLog::log(ArLog::Terse, "Internal error: robot connector succeeded but ArRobot::isConnected() is false!");
    }




    // Connector for laser rangefinders
    ArLaserConnector laserConnector(&parser, &robot, &robotConnector);


    // Sonar, must be added to the robot, used by teleoperation and wander to
    // detect obstacles, and for localization if SONARNL
    ArSonarDevice sonarDev;

    // Add the sonar to the robot
    robot.addRangeDevice(&sonarDev);

    // Start the robot thread.
    robot.runAsync(true);


    // Connect to the laser(s) if lasers were configured in this robot's parameter
    // file or on the command line, and run laser processing thread if applicable
    // for that laser class.  For the purposes of this demo, add all
    // possible lasers to ArRobot's list rather than just the ones that were
    // connected by this call so when you enter laser mode, you
    // can then interactively choose which laser to use from that list of all
    // lasers mentioned in robot parameters and on command line. Normally,
    // only connected lasers are put in ArRobot's list.
    if (!laserConnector.connectLasers(
                false,  // continue after connection failures
                true,  // add only connected lasers to ArRobot
                true    // add all lasers to ArRobot
            ))
    {
        ArLog::log(ArLog::Normal ,"Could not connect to lasers... exiting\n");
        Aria::exit(2);
    }


    // Puntero a laser
    ArSick* sick=(ArSick*)robot.findLaser(1);



    // Conectamos el laser
    sick->asyncConnect();

    //Esperamos a que esté encendido
    while(!sick->isConnected())
    {
        ArUtil::sleep(100);
    }

    ArLog::log(ArLog::Normal ,"Laser conectado\n");




    // Set up things so data can be logged (only do it with the laser
    // since it can overrun a 9600 serial connection which the sonar is
    // more likely to have)
    ArDataLogger dataLogger(&robot);
    dataLogger.addToConfig(Aria::getConfig());

    // add our logging to the config
    //ArLog::addToConfig(Aria::getConfig());




    // Set up a class that'll put the movement and gyro parameters into ArConfig
    ArRobotConfig robotConfig(&robot);
    robotConfig.addAnalogGyro(&gyro);



    // Add additional range devices to the robot and path planning task.
    // IRs if the robot has them.
    robot.lock();
    ArIRs irs;
    robot.addRangeDevice(&irs);

    // Bumpers.
    ArBumpers bumpers;
    robot.addRangeDevice(&bumpers);


    // cause the sonar to turn off automatically
    // when the robot is stopped, and turn it back on when commands to move
    // are sent. (Note, this should not be done if you need the sonar
    // data to localize, or for other purposes while stopped)
    ArSonarAutoDisabler sonarAutoDisabler(&robot);



    // Read in parameter files.
    Aria::getConfig()->useArgumentParser(&parser);
    if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
    {
        ArLog::log(ArLog::Normal, "Trouble loading configuration file, exiting");
        Aria::exit(5);
    }




    //Configuracion del laser
    sick->setMinDistBetweenCurrent(0);

    robot.enableMotors();
    robot.setAbsoluteMaxTransVel(1000);

    /* Finally, get ready to run the robot: */
    robot.unlock();



    Controlador driver(&robot);

    if(exist_data_index){
    	driver.setDataIndex(data_index);
    }

    driver.runAsync();


    ControlHandler handler(&driver,&robot);
    // Use manual key handler
    //handler.addKeyHandlers(&robot);
    robot.addSensorInterpTask("ManualKeyHandler",50,handler.getFunctor());
    ArLog::log(ArLog::Normal ,"Añadido manejador teclado\n");












//    double x,y,dist,angle;

//    ArPose punto;
//    ArPose origen=robot.getPose();

//    sick->lockDevice();

//    for(int i=-90;i<90;i++){
//	// Obtengo la medida de distancia y angulo
//	dist=sick->currentReadingPolar(i,i+1,&angle);

//	// Obtengo coordenadas del punto usando el laser como referencia
//	x=dist*ArMath::cos(angle);
//	y=dist*ArMath::sin(angle);

//	//Roto los puntos
//	ArMath::pointRotate(&x,&y,-origen.getTh());
//	punto.setX(x);
//	punto.setY(y);

//	punto=punto + origen;

//	printf("Medida: %d\t Angulo:%.2f\t Angulo:%.2f\t Distancia:%0.2f\t X:%0.2f\t Y:%0.2f\n",i,angle,angle+origen.getTh(),dist,punto.getX(),punto.getY());
//    }
//    printf("Medidas adquiridas\n");

//    sick->unlockDevice();


    robot.waitForRunExit();


    //ArUtil::sleep(10000);


    return 0;

}
예제 #19
0
int main(int argc, char **argv)
{
  int ret;
  std::string str;
  // the serial connection (robot)
  ArSerialConnection serConn;
  // tcp connection (sim)
  ArTcpConnection tcpConn;
  // the robot
  ArRobot robot;
  // the laser
  ArSick sick;
  // the laser connection
  ArSerialConnection laserCon;

  bool useSimForLaser = false;


  std::string hostname = "prod.local.net";

  // timeouts in minutes
  int wanderTime = 0;
  int restTime = 0;


  // check arguments
  if (argc == 3 || argc == 4)
  {
    wanderTime = atoi(argv[1]);
    restTime = atoi(argv[2]);
    if (argc == 4)
      hostname = argv[3];
  }
  else
  {
    printf("\nUsage:\n\tpeoplebotTest <wanderTime> <restTime> <hostname>\n\n");
    printf("Times are in minutes.  Hostname is the machine to pipe the ACTS display to\n\n");
    wanderTime = 15;
    restTime = 45;
  }

  printf("Wander time - %d minutes\nRest time - %d minutes\n", wanderTime, restTime);
  printf("Sending display to %s.\n\n", hostname.c_str());

  // sonar, must be added to the robot
  ArSonarDevice sonar;

  // the actions we'll use to wander
  ArActionStallRecover recover;
  ArActionBumpers bumpers;
  ArActionAvoidFront avoidFrontNear("Avoid Front Near", 225, 0);
  ArActionAvoidFront avoidFrontFar;

  // Make a key handler, so that escape will shut down the program
  // cleanly
  ArKeyHandler keyHandler;

  // mandatory init
  Aria::init();

  // Add the key handler to Aria so other things can find it
  Aria::setKeyHandler(&keyHandler);

  // Attach the key handler to a robot now, so that it actually gets
  // some processing time so it can work, this will also make escape
  // exit
  robot.attachKeyHandler(&keyHandler);


  // First we see if we can open the tcp connection, if we can we'll
  // assume we're connecting to the sim, and just go on...  if we
  // can't open the tcp it means the sim isn't there, so just try the
  // robot

  // modify this next line if you're not using default tcp connection
  tcpConn.setPort();

  // see if we can get to the simulator  (true is success)
  if (tcpConn.openSimple())
  {
    // we could get to the sim, so set the robots device connection to the sim
    printf("Connecting to simulator through tcp.\n");
    robot.setDeviceConnection(&tcpConn);
  }
  else
  {
    // we couldn't get to the sim, so set the port on the serial
    // connection and then set the serial connection as the robots
    // device

    // modify the next line if you're not using the first serial port
    // to talk to your robot
    serConn.setPort();
    printf(
      "Could not connect to simulator, connecting to robot through serial.\n");
    robot.setDeviceConnection(&serConn);
  }
  
  
  // add the sonar to the robot
  robot.addRangeDevice(&sonar);

  // add the laser
  robot.addRangeDevice(&sick);

  // try to connect, if we fail exit
  if (!robot.blockingConnect())
  {
    printf("Could not connect to robot... exiting\n");
    Aria::shutdown();
    return 1;
  }

  // turn on the motors, turn off amigobot sounds
  //robot.comInt(ArCommands::ENABLE, 1);
  robot.comInt(ArCommands::SOUNDTOG, 0);

  // turn off the sonar to start with
  robot.comInt(ArCommands::SONAR, 0);

  // add the actions
  robot.addAction(&recover, 100);
  robot.addAction(&bumpers, 75);
  robot.addAction(&avoidFrontNear, 50);
  robot.addAction(&avoidFrontFar, 49);
  
  // start the robot running, true so that if we lose connection the run stops
  robot.runAsync(true);

  if (!useSimForLaser)
  { 
    sick.setDeviceConnection(&laserCon);

    if ((ret = laserCon.open("/dev/ttyS2")) != 0)
    {
      str = tcpConn.getOpenMessage(ret);
      printf("Open failed: %s\n", str.c_str());
      Aria::shutdown();
      return 1;
    }
    sick.configureShort(false);
  }
  else 
  {
    sick.configureShort(true);
  }

  sick.runAsync();

  if (!sick.blockingConnect())
  {
    printf("Could not connect to SICK laser... exiting\n");
    Aria::shutdown();
    return 1;
  }

  robot.lock();
  robot.comInt(ArCommands::ENABLE, 1);
  robot.unlock();

  // add the peoplebot test
  PeoplebotTest pbTest(&robot, wanderTime, restTime, hostname);

  robot.waitForRunExit();

  // now exit
  Aria::shutdown();
  return 0;
}
예제 #20
0
int main(int argc, char **argv)
{
  std::string str;
  int ret;
  int successes = 0, failures = 0;
  int action;
  bool exitOnFailure = true;
  
  ArSerialConnection con;
  ArRobot robot;
  //ArLog::init(ArLog::StdOut, ArLog::Verbose);
  srand(time(NULL));
  robot.runAsync(false);
// if (!exitOnFailure)
//    ArLog::init(ArLog::None, ArLog::Terse);
  //else
  //ArLog::init(ArLog::None);
  while (1)
  {
    if (con.getStatus() != ArDeviceConnection::STATUS_OPEN &&
	(ret = con.open()) != 0)
    {
      str = con.getOpenMessage(ret);
      printf("Open failed: %s\n", str.c_str());
      ++failures;
      if (exitOnFailure)
      {
	printf("Failed\n");
	exit(0);
      }
      else
      {
	ArUtil::sleep(200);
	robot.unlock();
	continue;
      }
    }
    robot.lock();
    robot.setDeviceConnection(&con);
    robot.unlock();
    ArUtil::sleep((rand() % 5) * 100);
    if (robot.asyncConnect())
    {
      robot.waitForConnectOrConnFail();
      robot.lock();
      if (!robot.isConnected())
      {
	if (exitOnFailure)
	{
	  printf("Failed after %d tries.\n", successes);
	  exit(0);
	}
	printf("Failed to connect successfully");
	++failures;
      }
      robot.comInt(ArCommands::SONAR, 0);
      robot.comInt(ArCommands::SOUNDTOG, 0);
      //robot.comInt(ArCommands::PLAYLIST, 0);
      robot.comInt(ArCommands::ENCODER, 1);
      ArUtil::sleep(((rand() % 20) + 3) * 100);
      ++successes;
      // okay, now try to leave it in a messed up state
      action = rand() % 8;
      robot.dropConnection();
      switch (action) {
      case 0:
	printf("Discon  0 ");
	robot.disconnect();
	ArUtil::sleep(100);
	robot.com(0);
	break;
      case 1:
	printf("Discon  1 ");
	robot.disconnect();
	ArUtil::sleep(100);
	robot.com(0);
	ArUtil::sleep(100);
	robot.com(1);
	break;
      case 2:
	printf("Discon  2 ");
	robot.disconnect();
	ArUtil::sleep(100);
	robot.com(0);
	ArUtil::sleep(100);
	robot.com(1);
	ArUtil::sleep(100);
	robot.com(2);
	break;
      case 3:
	printf("Discon 10 ");
	robot.disconnect();
	ArUtil::sleep(100);
	robot.com(10);
	break;
      case 4:
	printf("Discon    ");
	robot.disconnect();
	break;
      default:
	printf("Leave     ");
	break;
      }
      robot.unlock();
    }
    else
    {
      if (exitOnFailure)
      {
	printf("Failed after %d tries.\n", successes);
	exit(0);
      }
      printf("Failed to start connect ");
      ++failures;
    }
    if ((rand() % 2) == 0)
    {
      printf(" ! RadioDisconnect ! ");
      con.write("|||\15", strlen("!!!\15"));
      
      ArUtil::sleep(100);
      con.write("WMD\15", strlen("WMD\15"));
      ArUtil::sleep(200);
    }
    if ((rand() % 2) == 0)
    {
      printf(" ! ClosePort !\n");
      con.close();
    }
    else
      printf("\n");
    printf("#### %d successes %d failures, %% %.2f success\n", successes, failures,
	   (float)successes/(float)(successes+failures)*100);

    ArUtil::sleep((rand() % 2)* 1000);
  }
  return 0; 
}
예제 #21
0
int main(int argc, char **argv)
{

//----------------------initialized robot server------------------------------------------
  Aria::init();
  Arnl::init();
  
  ArServerBase server;
	
//-----------------------------------------------------------------------------------
	VCCHandler ptz(&robot); 		//create keyboard for control vcc50i

	
	G_PTZHandler->reset();
	ArUtil::sleep(300);
	G_PTZHandler->panSlew(30);
//-----------------------------------------------------------------------------------

  argc = 2 ;

  argv[0] = "-map";
  argv[1] = "map20121111.map";
  
  // Parse the command line arguments.
  ArArgumentParser parser(&argc, argv);

  // Set up our simpleConnector
  ArSimpleConnector simpleConnector(&parser);

  // Set up our simpleOpener
  ArServerSimpleOpener simpleOpener(&parser);
  

//*******
  // Set up our client for the central server
//   ArClientSwitchManager clientSwitch(&server, &parser);
//************
  
  // Load default arguments for this computer (from /etc/Aria.args, environment
  // variables, and other places)
//   parser.loadDefaultArguments();

  // set up a gyro
  ArAnalogGyro gyro(&robot);
  //gyro.activate();
  // Parse arguments for the simple connector.
//   if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
//   {
//     ArLog::log(ArLog::Normal, "\nUsage: %s -map mapfilename\n", argv[0]);
//     Aria::logOptions();
//     Aria::exit(1);
//   }


  // The laser object, will be used if we have one


  // Add the laser to the robot
  robot.addRangeDevice(&sick);

  // Sonar, must be added to the robot, used by teleoperation and wander to
  // detect obstacles, and for localization if SONARNL
  ArSonarDevice sonarDev;

  // Add the sonar to the robot
  robot.addRangeDevice(&sonarDev);
  
  // Set up where we'll look for files
  char fileDir[1024];
  ArUtil::addDirectories(fileDir, sizeof(fileDir), "./", "maps");
  ArLog::log(ArLog::Normal, "Installation directory is: %s\nMaps directory is: %s\n", Aria::getDirectory(), fileDir);
  
  // Set up the map, this will look for files in the examples
  // directory (unless the file name starts with a /, \, or .
  // You can take out the 'fileDir' argument to look in the current directory
  // instead
  
  ArMap arMap(fileDir);
  // set it up to ignore empty file names (otherwise the parseFile
  // on the config will fail)
  arMap.setIgnoreEmptyFileName(true);
  
//********************************
//Localization
//********************************
  

  ArLocalizationManager locManager(&robot, &arMap);
  ArLog::log(ArLog::Normal, "Creating laser localization task");
  ArLocalizationTask locTask (&robot, &sick, &arMap);
  locManager.addLocalizationTask(&locTask);

  
//*******************************
//Path planning
//*******************************
  
  // Make the path task planning task
  ArPathPlanningTask pathTask(&robot, &sick, &sonarDev, &arMap);
  G_PathPlanning = &pathTask;
  // Set up things so data can be logged (only do it with the laser
  // since it can overrun a 9600 serial connection which the sonar is
  // more likely to have)
  ArDataLogger dataLogger(&robot);
  dataLogger.addToConfig(Aria::getConfig());

  
  
  
  // add our logging to the config
//   ArLog::addToConfig(Aria::getConfig());

  // First open the server 
  if (!simpleOpener.open(&server, fileDir, 240))
  {
    if (simpleOpener.wasUserFileBad())
      ArLog::log(ArLog::Normal, "Bad user file");
    else
      ArLog::log(ArLog::Normal, "Could not open server port");
    exit(2);
  }

  // Connect the robot
  if (!simpleConnector.connectRobot(&robot))
  {
    ArLog::log(ArLog::Normal, "Could not connect to robot... exiting");
    Aria::exit(3);
  }

  
//-----------------------------------------------
//**************************
  // Set up a class that'll put the movement and gyro parameters into ArConfig
  ArRobotConfig robotConfig(&robot);
  robotConfig.addAnalogGyro(&gyro);
//*****************************
  
  
  robot.enableMotors();
  robot.clearDirectMotion();

  // if we are connected to a simulator, reset it to its start position
  robot.comInt(ArCommands::RESETSIMTOORIGIN, 1);
  robot.moveTo(ArPose(0,0,0));


  // Set up laser using connector (command line arguments, etc.)
   simpleConnector.setupLaser(&sick);

  // Start the robot thread.
  robot.runAsync(true);
  
  // Start the laser thread.
  sick.runAsync();

  // Try to connect the laser
  if (!sick.blockingConnect())
    ArLog::log(ArLog::Normal, "Warning: Couldn't connect to SICK laser, it won't be used");
  else
    ArLog::log(ArLog::Normal, "Connected to laser.");

//***************************************
  // Add additional range devices to the robot and path planning task.
  // IRs if the robot has them.
  robot.lock();
//   ArIRs irs;
//   robot.addRangeDevice(&irs);
//   pathTask.addRangeDevice(&irs, ArPathPlanningTask::CURRENT);
//******************************************


  // Forbidden regions from the map
  ArForbiddenRangeDevice forbidden(&arMap);
  robot.addRangeDevice(&forbidden);

  // This is the place to add a range device which will hold sensor data
  // and delete it appropriately to replan around blocked paths.
  ArGlobalReplanningRangeDevice replanDev(&pathTask);

  // Create objects that add network services:
  
  // Drawing in the map display:
  ArServerInfoDrawings drawings(&server);
  drawings.addRobotsRangeDevices(&robot);
  drawings.addRangeDevice(&replanDev);

  /* If you want to draw the destination put this code back in:
  ArServerDrawingDestination destination(
	  &drawings, &pathTask, "destination",
	  500, 500,
	  new ArDrawingData("polyDots",
			    ArColor(0xff, 0xff, 0x0),
			    800, // size
			    49), // just below the robot
  */ 

  /* If you want to see the local path planning area use this 
    (You can enable this particular drawing from custom commands 
    which is set up down below in ArServerInfoPath) 
  ArDrawingData drawingDataP("polyLine", ArColor(200,200,200), 1, 75);
  ArFunctor2C<ArPathPlanningTask, ArServerClient *, ArNetPacket *> 
  drawingFunctorP(pathTask, &ArPathPlanningTask::drawSearchRectangle);
  drawings.addDrawing(&drawingDataP, "Local Plan Area", &drawingFunctorP); 
  */

  /* If you want to see the points making up the local path in addition to the
   * main path use this. 
  ArDrawingData drawingDataP2("polyDots", ArColor(0,128,0), 100, 70);
  ArFunctor2C<ArPathPlanningTask, ArServerClient *, ArNetPacket *> 
  drawingFunctorP2(pathTask, &ArPathPlanningTask::drawPathPoints);
  drawings.addDrawing(&drawingDataP2, "Path Points", &drawingFunctorP2);
  */

  // Misc. simple commands:
  ArServerHandlerCommands commands(&server);
	

  // These provide various kinds of information to the client:
  ArServerInfoRobot serverInfoRobot(&server, &robot);
  ArServerInfoSensor serverInfoSensor(&server, &robot);
  ArServerInfoPath serverInfoPath(&server, &robot, &pathTask);
  serverInfoPath.addSearchRectangleDrawing(&drawings);
  serverInfoPath.addControlCommands(&commands);
//-------------------------receive commands or events from client---------------------
  
//   ArServerHandlerCommands commands(&server);
	server.addData("RobotVideo"			,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&VideoServerBase::RobotVideoCB) ,"","");
	server.addData("turn"						,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&turn_func) ,"","");
	server.addData("RobotMotion"	  ,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&S_RobotMotion) ,"","");
	server.addData("CameraMotion"   ,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&S_CameraMotion) ,"","");
	server.addData("RobotTurnLeft"  ,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&S_RobotTurnLeft) ,"","");
	server.addData("RobotTurnRight" ,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&S_RobotTurnRight) ,"","");
	server.addData("TargetApproach" ,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&S_TargetApproach) ,"","");
	server.addData("TargetApproachObstacles" ,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&S_TargetApproach_Obstacles) ,"","");
	server.addData("GlassesCancel" ,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&S_GlassesCancel) ,"","");
	server.addData("Calibration" ,"", new ArGlobalFunctor2<ArServerClient *, ArNetPacket*>(&S_Calibration) ,"","");

	server.addClientRemovedCallback(new ArGlobalFunctor1< ArServerClient * >(&clientCloseCallback));
//-------------------------receive commands or events from client---------------------


  
//***********************  
  ArServerInfoLocalization serverInfoLocalization (&server, &robot, &locManager);
  ArServerHandlerLocalization serverLocHandler (&server, &robot, &locManager);


  // Provide the map to the client (and related controls):
  // This uses both lines and points now, since everything except
  // sonar localization uses both (path planning with sonar still uses both)
  ArServerHandlerMap serverMap(&server, &arMap);

  

  // Add some simple (custom) commands for testing and debugging:
  ArServerSimpleComUC uCCommands(&commands, &robot);                   // Send any command to the microcontroller
  ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // configure logging
  ArServerSimpleComGyro gyroCommands(&commands, &robot, &gyro);        // monitor the gyro
  ArServerSimpleComLogRobotConfig configCommands(&commands, &robot);   // trigger logging of the robot config parameters
  ArServerSimpleServerCommands serverCommands(&commands, &server);     // monitor networking behavior (track packets sent etc.)


  /* Set up the possible modes for remote control from a client such as
   * MobileEyes:
   */

  // Mode To go to a goal or other specific point:
  ArServerModeGoto modeGoto(&server, &robot, &pathTask, &arMap, ArPose(0,0,0));

  // Add a simple (custom) command that allows you to give a list of 
  // goals to tour, instead of all. Useful for testing and debugging.
  modeGoto.addTourGoalsInListSimpleCommand(&commands);

  // Mode To stop and remain stopped:
  ArServerModeStop modeStop(&server, &robot);

  // cause the sonar to turn off automatically
  // when the robot is stopped, and turn it back on when commands to move
  // are sent. (Note, this should not be done if you need the sonar
  // data to localize, or for other purposes while stopped)
  ArSonarAutoDisabler sonarAutoDisabler(&robot);

  // Teleoperation modes To drive by keyboard, joystick, etc:
  ArServerModeRatioDrive modeRatioDrive(&server, &robot);  // New, improved mode
  ArServerModeDrive modeDrive(&server, &robot);            // Older mode for compatability

  // Drive mode's configuration and custom (simple) commands:
  modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings");
  modeDrive.addControlCommands(&commands);
  modeRatioDrive.addControlCommands(&commands);

  // Wander mode 
//   ArServerModeWander modeWander(&server, &robot);
//*********************************
  // Prevent driving if localization is lost:
  ArActionLost actionLostRatioDrive (&locManager, NULL, &modeRatioDrive);
  modeRatioDrive.getActionGroup ()->addAction (&actionLostRatioDrive, 110);

  // Prevent wandering if lost:
//   ArActionLost
//   actionLostWander (&locManager, NULL, &modeWander);
//   modeWander.getActionGroup ()->addAction (&actionLostWander, 110);

  // This provides a small table of interesting information for the client
  // to display to the operator:
  ArServerInfoStrings stringInfo(&server);
  Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
  
  Aria::getInfoGroup()->addStringInt(
	  "Motor Packet Count", 10, 
	  new ArConstRetFunctorC<int, ArRobot>(&robot, 
					       &ArRobot::getMotorPacCount));


  // Make Stop mode the default (If current mode deactivates without entering
  // a new mode, then Stop Mode will be selected)
  modeStop.addAsDefaultMode();






  // Create the service that allows the client to monitor the communication 
  // between the robot and the client.
  //
  ArServerHandlerCommMonitor handlerCommMonitor(&server);

  // Create service that allows client to change configuration parameters in ArConfig 
  ArServerHandlerConfig handlerConfig(&server, Aria::getConfig(),
				      Arnl::getTypicalDefaultParamFileName(),
				      Aria::getDirectory());



  // Read in parameter files.  read the paras from input
  Aria::getConfig()->useArgumentParser(&parser);
  if (!Aria::getConfig()->parseFile(Arnl::getTypicalParamFileName()))
  {
    ArLog::log(ArLog::Normal, "Trouble loading configuration file, exiting");
    Aria::exit(5);
  }

  // Warn about unknown params.
  if (!simpleOpener.checkAndLog() || !parser.checkHelpAndWarnUnparsed())
  {
    ArLog::log(ArLog::Normal, "\nUsage: %s -map mapfilename\n", argv[0]);
    simpleConnector.logOptions();
    simpleOpener.logOptions();
    Aria::exit(6);
  }

  // Warn if there is no map
  if (arMap.getFileName() == NULL || strlen(arMap.getFileName()) <= 0)
  {
    ArLog::log(ArLog::Normal, "");
    ArLog::log(ArLog::Normal, "### Warning, No map file is set up, you can make a map with sickLogger or arnlServer, and Mapper3; More info in docs/Mapping.txt and README.txt. Set the map with the -map command line option, or by changing the config with MobileEyes or by editing the config file.");
    ArLog::log(ArLog::Normal, "");    
  }

  // find out where we'll want to put files
  ArLog::log(ArLog::Normal, "");
  ArLog::log(ArLog::Normal, 
	     "Directory for maps and file serving: %s", fileDir);
  
  ArLog::log(ArLog::Normal, "See the ARNL README.txt for more information");
  ArLog::log(ArLog::Normal, "");

  // If you want MobileSim to try and load up the same map as you are
  // using in guiServer then uncomment out the next line and this object
  // will send a command to MobileSim to do so, but make sure you start 
  // MobileSim from the Arnl/examples directory or use the --cwd option, 
  // so that the map names used by MobileSim match  the map names used 
  // by guiServer
  //ArSimMapSwitcher mapSwitcher(&robot, &arMap);

/******************************************************
 * ****************************************************
 * 			Camera 
 * ****************************************************
 * *****************************************************/
	
  
  robot.unlock();
    // Localize robot at home.
  locTask.localizeRobotAtHomeBlocking();

  locTask.forceUpdatePose(ArPose(0,0,0));

  resetMotion();
  

	

// robot.enableMotors();
// robot.runAsync(true);
  //locTask.localizeRobotAtHomeBlocking();
  server.runAsync();

  VideoServerBase videoserver;
  videoserver.runAsync();

	robot.comInt(ArCommands::SOUNDTOG, 0);
	
	//G_PathPlanning->pathPlanToPose(ArPose(1500, -1500 , -32),true,true);
	//while(G_PathPlanning->getState() != ArPathPlanningTask::REACHED_GOAL );

	//S_TargetApproach_Obstacles1();

	//ArUtil::sleep(5000);


 //   G_PTZHandler->panRel(60);
	//	ArUtil::sleep(3000);
	//while(1)
	//S_TargetApproach1();
	cout << "done!!!!!!!---------------------" <<endl;
  robot.waitForRunExit();
  Aria::exit(0);
}
예제 #22
0
int main(int argc, char **argv) 
{
  std::string str;
  int ret;
  int dist;
  ArTime start;
  ArPose startPose;
  bool vel2 = false;

  // connection to the robot
  ArSerialConnection con;
  // the robot
  ArRobot robot;
  // the connection handler from above
  ConnHandler ch(&robot);
  
  // init area with a dedicated signal handling thread
  Aria::init(Aria::SIGHANDLE_THREAD);

  if (argc != 2 || (dist = atoi(argv[1])) == 0)
    {
      printf("Usage: %s <distInMM>\n", argv[0]);
      exit(0);
    }
  if (dist < 1000)
    {
      printf("You must go at least a meter\n");
      exit(0);
    }
  // open the connection with the defaults, exit if failed
  if ((ret = con.open()) != 0)
  {
    str = con.getOpenMessage(ret);
    printf("Open failed: %s\n", str.c_str());
    Aria::shutdown();
    return 1;
  }

  // set the robots connection
  robot.setDeviceConnection(&con);
  // try to connect, if we fail, the connection handler should bail
  if (!robot.blockingConnect())
  {
    // this should have been taken care of by the connection handler
    // but just in case
    printf(
    "asyncConnect failed because robot is not running in its own thread.\n");
    Aria::shutdown();
    return 1;
  }
  // run the robot in its own thread, so it gets and processes packets and such
  robot.runAsync(false);

  // just a big long set of printfs, direct motion commands and sleeps,
  // it should be self-explanatory

  robot.lock();

  /*
  robot.setAbsoluteMaxTransVel(2000);
  robot.setTransVelMax(2000);
  robot.setTransAccel(1000);
  robot.setTransDecel(1000);
  robot.comInt(82, 30); // rotkp
  robot.comInt(83, 200); // rotkv
  robot.comInt(84, 0); // rotki
  robot.comInt(85, 30); // transkp
  robot.comInt(86, 450); // transkv
  robot.comInt(87, 4); // transki

  */
  printf("Driving %d mm (going full speed for that far minus a meter then stopping)\n", dist);
  if (vel2)
    robot.setVel2(2200, 2200);
  else
    robot.setVel(2200);
  robot.unlock();
  start.setToNow();
  startPose = robot.getPose();
  while (1)
  {
    robot.lock();
    printf("\r vel: %.0f x: %.0f y: %.0f: dist: %.0f heading: %.2f",
	   robot.getVel(), robot.getX(), robot.getY(), 
	   startPose.findDistanceTo(robot.getPose()),
	   robot.getTh());
    if (startPose.findDistanceTo(robot.getPose()) > abs(dist) - 1000)
    {
      printf("\nFinished distance\n");
      robot.setVel(0);
      robot.unlock();
      break;
    }
    if (start.mSecSince() > 10000)
    {
      printf("\nDistance timed out\n");
      robot.setVel(0);
      robot.unlock();
      break;
    }   
    robot.unlock();
    ArUtil::sleep(50);
  }
  
  if (vel2)
    robot.setVel2(0, 0);
  else
    robot.setVel(0);
  start.setToNow();
  while (1)
    {
      robot.lock();
      if (vel2)
	robot.setVel2(0, 0);
      else
	robot.setVel(0);
      if (fabs(robot.getVel()) < 20)
	{
	  printf("Stopped\n");
	  robot.unlock();
	  break;
	}
      if (start.mSecSince() > 2000)
	{
	  printf("\nStop timed out\n");
	  robot.unlock();
	  break;
	}
      robot.unlock();
      ArUtil::sleep(50);
    }
  robot.lock();
  robot.disconnect();
  robot.unlock();
  // shutdown and ge tout
  Aria::shutdown();
  return 0;
}
예제 #23
0
int main(int argc, char **argv) 
{
	struct settings robot_settings;

	robot_settings.min_distance = 500;
	robot_settings.max_velocity = 500;
	robot_settings.tracking_factor = 1.0;

	ArRobot robot;
	Aria::init();
	//laser
	int ret; //Don't know what this variable is for
	ArSick sick; // Laser scanner
	ArSerialConnection laserCon; // Scanner connection
	std::string str; // Standard output
	// sonar, must be added to the robot
	ArSonarDevice sonar;
	// add the sonar to the robot
	robot.addRangeDevice(&sonar);
	// add the laser to the robot
	robot.addRangeDevice(&sick);

	ArArgumentParser argParser(&argc, argv);
	ArSimpleConnector con(&argParser);

	// the connection handler from above
	ConnHandler ch(&robot);

	if(!Aria::parseArgs())
	{
		Aria::logOptions();
		Aria::shutdown();
		return 1;
	}
	if(!con.connectRobot(&robot))
	{
		ArLog::log(ArLog::Normal, "directMotionExample: Could not connect to the robot. Exiting.");
		return 1;
	}
	ArLog::log(ArLog::Normal, "directMotionExample: Connected.");
	robot.runAsync(false);

	///////////////////////////////
	// Attempt to connect to SICK using another hard-coded USB connection
	sick.setDeviceConnection(&laserCon);
	if((ret=laserCon.open("/dev/ttyUSB1")) !=0){
		//If connection fails, shutdown
		Aria::shutdown();
		return 1;
	}
	//Configure the SICK
	sick.configureShort(false,/*not using sim*/ArSick::BAUD38400,ArSick::DEGREES180,ArSick::INCREMENT_HALF);
	//Run the sick
	sick.runAsync();
	// Presumably test to make sure that the connection is good
	if(!sick.blockingConnect()){
		printf("Could not get sick...exiting\n");
		Aria::shutdown();
		return 1; 
	}
	printf("We are connected to the laser!");

	printf("\r\nRobot Entering default resting state.\r\nUse the following commands to run the robot.\r\n");
	printf("r  Run the robot\r\n");
	printf("s  Stop the robot\r\n");
	printf("t  Enter test mode (the robot will do everything except actually move.\r\n");
	printf("w  Save current data to files, and show a plot of what the robot sees.\r\n");
	printf("e  Edit robot control parameters\r\n");
	printf("q  Quit the program\r\n");

	printf("\r\n");
	printf("\r\n");
	printf("NOTE: You must have GNUPLOT installed on your computer, and create a directory entitled 'scan_data' under your current directory in order to use this script. Failure to do so might make the computer crash, which would cause the robot to go on a mad killing spree! Not really, but seriously, go ahead and get GNUPLOT and create that subdirectory before using the 'w' option.\r\n\r\n"); 

	/////////////////////////////////////
	char user_command = 0;
	char plot_option = 0;

	int robot_state = REST;

	tracking_object target;
	tracking_object l_target;

	ofstream fobjects;
	ofstream ftarget;
	ofstream flog;
	ofstream fltarget;


	fobjects.open("./scan_data/objects_new.txt");
	ftarget.open("./scan_data/target_new.txt");
	fltarget.open("./scan_data/ltarget_new.txt");
	fobjects << "\r\n";
	ftarget << "\r\n";
	fltarget << "\r\n";
	fobjects.close();
	ftarget.close();
	fltarget.close();

	flog.open("robot_log.txt");

	std::vector<tracking_object> obj_vector;
	std::vector<tracking_object> new_vector;


	float last_v = 0;

	ArTime start;



	char test_flag = 0;
	char target_lost = 0;


	while(user_command != 'q')
	{
		switch (user_command)
		{
		case STOP:
			robot_state = REST;
			printf("robot has entered resting mode\r\n");

			break;
		case RUN:
			robot_state = TRACKING;
			printf("robot has entered tracking mode\r\n");
			break;
		case QUIT:
			robot_state = -1;
			printf("exiting... goodbye.\r\n");
			break;
		case WRITE:
			plot_option = WRITE;
			break;
		case NO_WRITE:
			plot_option = NO_WRITE;
			break;
		case TEST:
			if(test_flag == TEST)
			{
				test_flag = 0;
				printf("Exiting test mode\r\n");
			}
			else
			{
				test_flag = TEST;
				printf("Entering test mode\r\n");
				robot.lock();
				robot.setVel(0);
				robot.unlock();
			}
			break;

		case EDIT:
			edit_settings(&robot_settings);
			break;

		default:
			robot_state = robot_state;
		}


		unsigned int i = 0;
		unsigned int num_objects = 0;
		int to_ind = -1;
		float min_distance = 999999.9;
		float new_heading = 0;

		system("mv ./scan_data/objects_new.txt ./scan_data/objects.txt");
		system("mv ./scan_data/target_new.txt ./scan_data/target.txt");
		system("mv ./scan_data/ltarget_new.txt ./scan_data/ltarget.txt");

		fobjects.open("./scan_data/objects_new.txt");
		ftarget.open("./scan_data/target_new.txt");
		fltarget.open("./scan_data/ltarget_new.txt");

		switch (robot_state)
		{
		case REST:
			robot.lock();
			robot.setVel(0);
			robot.unlock();

			obj_vector = run_sick_scan(&sick, 2, plot_option);

			target_lost = 0;
			num_objects = obj_vector.size();
			if(num_objects > 0)
			{

				for(i = 0; i < num_objects; i++)
				{
					print_object_to_stream(obj_vector[i], fobjects);	
				}
			}

			break;

		case TRACKING:
			flog << "TRACKING\r\n";

			obj_vector = get_moving_objects(&sick, 2*DT, 10, plot_option);
			num_objects = obj_vector.size();

			target_lost = 0;

			if(min_range(&sick, 45, 135) > ROBOT_SAFETY_MARGIN)
			{
				if(num_objects)
				{
 					for(i = 0; i < obj_vector.size();i++)
					{	
						print_object_to_stream(obj_vector[i], fobjects);
						if(obj_vector[i].vmag > 0.1)
						{	
							if(obj_vector[i].distance < min_distance)
							{
								min_distance = obj_vector[i].distance;
								target = obj_vector[i];
								to_ind = i;
							}
						}
					}

					if(to_ind > -1)
					{
						int l_edge = target.l_edge;
						int r_edge = target.r_edge;
						float difference = 9999999.9;

// Do another scan to make sure the object is actually there.
						new_vector = get_moving_objects(&sick, DT, 10, 0, 5, 175);

						num_objects = new_vector.size();
						to_ind = -1;
						if(num_objects)
						{
							for(i = 0; i < num_objects;i++)
							{
								if(new_vector[i].vmag > 0.1)
								{	
									if(r_diff(target, new_vector[i])<difference)
									{
										difference = r_diff(target, new_vector[i]);
										if(difference < 500.0)
											to_ind = i;
									}
								}
							}
						}

						if(to_ind > -1)
						{
							new_heading = (-90 + new_vector[to_ind].degree);

							if(test_flag != TEST)
							{
								robot.lock();
								robot.setDeltaHeading(new_heading);
								robot.unlock();
							}

							robot_state = FOLLOWING;
							target = new_vector[to_ind];

							target.degree = target.degree - new_heading;


							print_object_to_stream(target, ftarget);

							print_object_to_stream(target, flog);
							flog << new_heading;
						}

					}
				}
			}
			else		      
			{
				robot_state = TOO_CLOSE;
				printf("I'm too close to an obstacle, and I'm getting claustrophobic! I'm going to slowly back up now.\r\n");
			}



			break;

		case FOLLOWING:
		{
			flog << "FOLLOWING\r\n";

			i = 0;
			int to_ind = -1;
			float obj_difference = 9999999.9;
			int num_scans = 0;

			if(min_range(&sick, 45, 135) > ROBOT_SAFETY_MARGIN)
			{
				while((num_scans < 3)&&(to_ind == -1))
				{
					obj_vector = run_sick_scan(&sick, 2, 0, 10, 350);
					num_objects = obj_vector.size();
					if(num_objects)
					{
						for(i = 0; i < num_objects;i++)
						{	
							if(r_diff(target, obj_vector[i]) < obj_difference)
							{	
								obj_difference = r_diff(target, obj_vector[i]);
								if (obj_difference < 500.0)
									to_ind = i;

							}
						}

						for(i = 0; i < num_objects;i++)
						{	
							if((int)i == to_ind)
							{
								print_object_to_stream(obj_vector[i], ftarget);
							}
							else
							{
								print_object_to_stream(obj_vector[i], fobjects);
							}
						}
					}
					num_scans++;
				}

				float new_vel = 0;

				if(to_ind > -1)
				{
					printf("Tracking target\r\n");
					flog << "Following target\t";

					target_lost = 0;

					target = obj_vector[to_ind];

					new_vel = (obj_vector[to_ind].distance - robot_settings.min_distance)*robot_settings.tracking_factor;
					if(new_vel < 0)
						new_vel = 0;

					if(new_vel > robot_settings.max_velocity)
						new_vel = robot_settings.max_velocity;

					new_heading = (-90 + target.degree)*0.25;
					new_heading = get_safe_path(&sick, new_heading, target.distance);

					if(test_flag != TEST)
					{
						robot.lock();
						robot.setVel(new_vel);
						robot.unlock();

						last_v = new_vel;

						robot.lock();
						robot.setDeltaHeading(new_heading);
						robot.unlock();
						target.degree = target.degree - new_heading;
					}
					if(new_vel < 1.0)
					{
						robot_state = TRACKING;
						printf("entering tracking mode\r\n");
						flog<<"entering tracking mode\r\n";
					}

				}
				else		      
				{
					if(target_lost)
					{
						
						l_target.distance = l_target.distance - last_v*(start.mSecSince()/1000.0);
 
						int temp_max_v = min_range(&sick, 5, 175);
						if(temp_max_v < last_v)
							last_v = temp_max_v;

						if(last_v > robot_settings.max_velocity)
							last_v = robot_settings.max_velocity;

						if(test_flag != TEST)
						{

							robot.lock();
							robot.setVel(last_v);
							robot.unlock();


							new_heading = -90.0 + l_target.degree;
							new_heading = get_safe_path(&sick, new_heading, l_target.distance);

							l_target.degree = target.degree - new_heading;

							robot.lock();
							robot.setDeltaHeading(new_heading);
							robot.unlock();
						}

						print_object_to_stream(l_target, fltarget);



					}
					else
					{
						target_lost = 1;
						l_target = target;
					}

					printf("target lost\r\n");
					flog << "target lost\r\n";
					start.setToNow();

					if(target.distance < ROBOT_SAFETY_MARGIN)
					{
						robot_state = TRACKING;
						target_lost = 0;
					}

					target_lost = 1;

				}
				printf("Velocity: %f\t",last_v);
				flog << "Velocity:\t";
				flog << last_v;

				printf("Heading: %f\t",new_heading);
				flog << "\tHeading\t";
				flog << new_heading;
				flog << "\r\n";
				printf("\r\n");

			}		
			else		      
			{
				robot_state = TOO_CLOSE;
				printf("I'm too close to an obstacle, and I'm getting claustrophobic! I'm going to slowly back up now.\r\n");
			}

			break;



		}

		case TOO_CLOSE:
		{
			flog << "Too close\r\n";
			if(min_range(&sick, 45, 135) > (ROBOT_SAFETY_MARGIN + 100))
			{		
				robot_state = TRACKING;
				printf("I feel better now! I'm going to reenter tracking mode.\r\n");
				robot.lock();
				robot.setVel(0);
				robot.unlock();
			}
			else
			{
				if(test_flag != TEST)
				{
					printf("Backing up...\r\n");
					robot.lock();
					robot.setVel(-50);
					robot.unlock();
				}

			}
			break;
 		}

		}

		fobjects.close();
		ftarget.close();
		fltarget.close();


		if(plot_option == WRITE)
		{
			system("./scan_data/plot_script.sh >/dev/null");
		}







////////////////////////////////////////////////////////////////////// 
// Everything past this point is code to grab the user input
		user_command = 0;


		fd_set rfds;
		struct timeval tv;
		int retval;

		FD_ZERO(&rfds);
		FD_SET(0, &rfds);

		tv.tv_sec = 0;
		tv.tv_usec = 100;

		retval = select(1, &rfds, NULL, NULL, &tv);

		if(retval == -1)
			perror("select()");
		else if(retval)
		{
			cin >> user_command;
			printf("input detected from user\r\n");
		}

		plot_option = NO_WRITE;
//////////////////////////////////////////////////////////////////////
		
	}
	flog.close();
	Aria::shutdown();
	printf("Shutting down");
	return 0;
}
int __cdecl _tmain (int argc, char** argv)
{

	//------------ I N I C I O   M A I N    D E L   P R O G R A M A   D E L    R O B O T-----------//

	  //inicializaion de variables
	  Aria::init();
	  ArArgumentParser parser(&argc, argv);
	  parser.loadDefaultArguments();
	  ArSimpleConnector simpleConnector(&parser);
	  ArRobot robot;
	  ArSonarDevice sonar;
	  ArAnalogGyro gyro(&robot);
	  robot.addRangeDevice(&sonar);
	  ActionGos go(500, 350);	  
	  robot.addAction(&go, 48);
	  ActionTurns turn(400, 110);
	  robot.addAction(&turn, 49);
	  ActionTurns turn2(400, 110);
	  robot.addAction(&turn2, 49);

	  // presionar tecla escape para salir del programa
	  ArKeyHandler keyHandler;
	  Aria::setKeyHandler(&keyHandler);
	  robot.attachKeyHandler(&keyHandler);
	  printf("Presionar ESC para salir\n");

	  // uso de sonares para evitar colisiones con las paredes u 
	  // obstaculos grandes, mayores a 8cm de alto
	  ArActionLimiterForwards limiterAction("limitador velocidad cerca", 300, 600, 250);
	  ArActionLimiterForwards limiterFarAction("limitador velocidad lejos", 300, 1100, 400);
	  ArActionLimiterTableSensor tableLimiterAction;
	  robot.addAction(&tableLimiterAction, 100);
	  robot.addAction(&limiterAction, 95);
	  robot.addAction(&limiterFarAction, 90);


	  // Inicializon la funcion de goto
	  ArActionGoto gotoPoseAction("goto");
	  robot.addAction(&gotoPoseAction, 50);
	  
	  // Finaliza el goto si es que no hace nada
	  ArActionStop stopAction("stop");
	  robot.addAction(&stopAction, 40);

	  // Parser del CLI
	  if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
	  {    
		Aria::logOptions();
		exit(1);
	  }
	  
	  // Conexion del robot
	  if (!simpleConnector.connectRobot(&robot))
	  {
		printf("Could not connect to robot... exiting\n");
		Aria::exit(1);
	  }
	  robot.runAsync(true);

	  // enciende motores, apaga sonidos
	  robot.enableMotors();
	  robot.comInt(ArCommands::SOUNDTOG, 0);

	  // Imprimo algunos datos del robot como posicion velocidad y bateria
		robot.lock();
		ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
			robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
		robot.unlock();

	  const int duration = 100000; //msec
	  ArLog::log(ArLog::Normal, "Completados los puntos en %d segundos", duration/1000);

	  // ============================ INICIO CONFIG COM =================================//
	    CSerial serial;
		LONG    lLastError = ERROR_SUCCESS;

		// Trata de abrir el com seleccionado
		lLastError = serial.Open(_T("COM3"),0,0,false);
		if (lLastError != ERROR_SUCCESS)
			return ::ShowError(serial.GetLastError(), _T("Imposible abrir el COM"));

		// Inicia el puerto serial (9600,8N1)
		lLastError = serial.Setup(CSerial::EBaud9600,CSerial::EData8,CSerial::EParNone,CSerial::EStop1);
		if (lLastError != ERROR_SUCCESS)
			return ::ShowError(serial.GetLastError(), _T("Imposible setear la config del COM"));

		// Register only for the receive event
		lLastError = serial.SetMask(CSerial::EEventBreak |
									CSerial::EEventCTS   |
									CSerial::EEventDSR   |
									CSerial::EEventError |
									CSerial::EEventRing  |
									CSerial::EEventRLSD  |
									CSerial::EEventRecv);
		if (lLastError != ERROR_SUCCESS)
			return ::ShowError(serial.GetLastError(), _T("Unable to set COM-port event mask"));

		// Use 'non-blocking' reads, because we don't know how many bytes
		// will be received. This is normally the most convenient mode
		// (and also the default mode for reading data).
		lLastError = serial.SetupReadTimeouts(CSerial::EReadTimeoutNonblocking);
		if (lLastError != ERROR_SUCCESS)
			return ::ShowError(serial.GetLastError(), _T("Unable to set COM-port read timeout."));
		// ============================ FIN CONFIG COM =================================//

	  bool first = true;
	  int goalNum = 0;
	  int color = 3;
	  ArTime start;
	  start.setToNow();
	  while (Aria::getRunning()) 
	  {
		robot.lock();

		// inicia el primer punto 
		if (first || gotoPoseAction.haveAchievedGoal())
		{
		  first = false;
		  
		  goalNum++; //cambia de 0 a 1 el contador
		  printf("El contador esta en: --> %d <---\n",goalNum);
		  if (goalNum > 20)
			goalNum = 1;

		  //comienza la secuencia de puntos
		  if (goalNum == 1)
		  {
			gotoPoseAction.setGoal(ArPose(1150, 0));
			ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
			gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			// Imprimo algunos datos del robot como posicion velocidad y bateria
			robot.lock();
			ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
				robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
			robot.unlock();
			// Create the sound queue.
			ArSoundsQueue soundQueue;
			// Run the sound queue in a new thread
			soundQueue.runAsync();
			std::vector<const char*> filenames;
			filenames.push_back("sound-r2a.wav");
			soundQueue.play(filenames[0]);
		  }
		  else if (goalNum == 2)
		  {
			  printf("Gira 90 grados izquierda\n");
			  robot.unlock();
			  turn.myActivate = 1;
			  turn.myDirection = 1;
			  turn.activate();
			  ArUtil::sleep(1000);
			  turn.deactivate();
			  turn.myActivate = 0;
			  turn.myDirection = 0;
			  robot.lock();
		  }
		  else if (goalNum == 3)
		  {
			gotoPoseAction.setGoal(ArPose(1150, 2670));
			ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
			gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			// Imprimo algunos datos del robot como posicion velocidad y bateria
			robot.lock();
			ArLog::log(ArLog::Normal, "Posicion=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Bateria=%.2fV",
				robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getBatteryVoltage());
			robot.unlock();
		  }
		  else if (goalNum == 4)
		  {
			  printf("Gira 90 grados izquierda\n");
			  robot.unlock();
			  turn2.myActivate = 1;
			  turn2.myDirection = 1;
			  turn2.activate();
			  ArUtil::sleep(1000);
			  turn2.deactivate();
			  turn2.myActivate = 0;
			  turn2.myDirection = 0;
			  robot.lock();
		  }
		  else if (goalNum == 5)
		  {
			gotoPoseAction.setGoal(ArPose(650, 2670));
			ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
			gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
		  }
		  else if (goalNum == 6)
		  {
			  printf("Gira 90 grados izquierda\n");
			  robot.unlock();
			  turn2.myActivate = 1;
			  turn2.myDirection = 1;
			  turn2.activate();
			  ArUtil::sleep(1000);
			  turn2.deactivate();
			  turn2.myActivate = 0;
			  turn2.myDirection = 0;
			  robot.lock();
		  }
		  else if (goalNum == 7)
		  {
			gotoPoseAction.setGoal(ArPose(650, 0));
			ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
			gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
		  }
		  else if (goalNum == 8)
		  {
			gotoPoseAction.setGoal(ArPose(1800,1199));
			ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
			gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
		  }
		  else if (goalNum == 9)
		  {
			gotoPoseAction.setGoal(ArPose(2600, 1199));
			ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
			gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
		  }
		  else if (goalNum == 10)
		  {
			  if (color == 1)
			  {
				gotoPoseAction.setGoal(ArPose(2800, 850));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
			  if (color == 2)
			  {
				gotoPoseAction.setGoal(ArPose(3500, 1199));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY()); 
			  }
			  if (color == 3)
			  {
				gotoPoseAction.setGoal(ArPose(2800, 1550));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
		  }
		  else if (goalNum == 11)
		  {
			  if (color == 1)
			  {
				gotoPoseAction.setGoal(ArPose(2800, 613));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
			  if (color == 2)
			  {
				  printf("Gira 180 grados derecha\n");
				  robot.unlock();
				  turn2.myActivate = 1;
				  turn2.myDirection = 2;
				  turn2.activate();
				  ArUtil::sleep(2000);
				  turn2.deactivate();
				  turn2.myActivate = 0;
				  turn2.myDirection = 0;
				  robot.lock();
				  goalNum = 19;
			  }
			  if (color == 3)
			  {
				gotoPoseAction.setGoal(ArPose(2800, 1785));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
		  }
		  else if (goalNum == 12)
		  {
			  if (color == 1)
			  {
				gotoPoseAction.setGoal(ArPose(3300, 413));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
			  if (color == 3)
			  {
				gotoPoseAction.setGoal(ArPose(3300, 1985));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
		  }
		  else if (goalNum == 13)
		  {
			  if (color == 1)
			  {
				gotoPoseAction.setGoal(ArPose(3500, 413));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
			  if (color == 3)
			  {
				gotoPoseAction.setGoal(ArPose(3500, 1985));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
		  }
		  else if (goalNum == 14)
		  {
			  robot.unlock();
			  //Valor para el while
			  bool fContinue = true;
				// <<<<<<------------- 1 Parte Secuencia: BAJA BRAZO ------------->>>>>> //
				lLastError = serial.Write("b");
				if (lLastError != ERROR_SUCCESS)
					return ::ShowError(serial.GetLastError(), _T("Unable to send data"));

				//-------------------------E S C U C H A   C O M ----------------------------//
				do
				{
					// Wait for an event
					lLastError = serial.WaitEvent();
					if (lLastError != ERROR_SUCCESS)
						return ::ShowError(serial.GetLastError(), _T("Unable to wait for a COM-port event."));

					// Save event
					const CSerial::EEvent eEvent = serial.GetEventType();

					// Handle break event
					if (eEvent & CSerial::EEventBreak)
					{
						printf("\n### BREAK received ###\n");
					}

					// Handle CTS event
					if (eEvent & CSerial::EEventCTS)
					{
						printf("\n### Clear to send %s ###\n", serial.GetCTS()?"on":"off");
					}

					// Handle DSR event
					if (eEvent & CSerial::EEventDSR)
					{
						printf("\n### Data set ready %s ###\n", serial.GetDSR()?"on":"off");
					}

					// Handle error event
					if (eEvent & CSerial::EEventError)
					{
						printf("\n### ERROR: ");
						switch (serial.GetError())
						{
						case CSerial::EErrorBreak:		printf("Break condition");			break;
						case CSerial::EErrorFrame:		printf("Framing error");			break;
						case CSerial::EErrorIOE:		printf("IO device error");			break;
						case CSerial::EErrorMode:		printf("Unsupported mode");			break;
						case CSerial::EErrorOverrun:	printf("Buffer overrun");			break;
						case CSerial::EErrorRxOver:		printf("Input buffer overflow");	break;
						case CSerial::EErrorParity:		printf("Input parity error");		break;
						case CSerial::EErrorTxFull:		printf("Output buffer full");		break;
						default:						printf("Unknown");					break;
						}
						printf(" ###\n");
					}

					// Handle ring event
					if (eEvent & CSerial::EEventRing)
					{
						printf("\n### RING ###\n");
					}

					// Handle RLSD/CD event
					if (eEvent & CSerial::EEventRLSD)
					{
						printf("\n### RLSD/CD %s ###\n", serial.GetRLSD()?"on":"off");
					}

					// Handle data receive event
					if (eEvent & CSerial::EEventRecv)
					{
						// Read data, until there is nothing left
						DWORD dwBytesRead = 0;
						char szBuffer[101];
						do
						{
							// Lee datos del Puerto COM
							lLastError = serial.Read(szBuffer,sizeof(szBuffer)-1,&dwBytesRead);
							if (lLastError != ERROR_SUCCESS)
								return ::ShowError(serial.GetLastError(), _T("Unable to read from COM-port."));

							if (dwBytesRead > 0)
							{
								//Preseteo color
								int color = 0;
								// Finaliza el dato, asi que sea una string valida
								szBuffer[dwBytesRead] = '\0';
								// Display the data
								printf("%s", szBuffer);

								// <<<<<<----------- 2 Parte Secuencia: CIERRA GRIPPER ----------->>>>>> //
								if (strchr(szBuffer,76))
								{
									lLastError = serial.Write("c");
									if (lLastError != ERROR_SUCCESS)
										return ::ShowError(serial.GetLastError(), _T("Unable to send data"));
								}
								
								// <<<<<<------------- 3 Parte Secuencia: SUBE BRAZO ------------->>>>>> //
								if (strchr(szBuffer,117))
								{
									lLastError = serial.Write("s");
									if (lLastError != ERROR_SUCCESS)
										return ::ShowError(serial.GetLastError(), _T("Unable to send data"));
								}

								// <<<<<<------------- 4 Parte Secuencia: COLOR ------------->>>>>> //
								if (strchr(szBuffer,72))
								{
									lLastError = serial.Write("C");
									if (lLastError != ERROR_SUCCESS)
										return ::ShowError(serial.GetLastError(), _T("Unable to send data"));
								}

								// <<<<<<---------- 5.1 Parte Secuencia: COLOR ROJO---------->>>>>> //
								if (strchr(szBuffer,82))
								{
									color = 1;
									//salir del bucle
									fContinue = false;
								}

								// <<<<<<---------- 5.2 Parte Secuencia: COLOR AZUL ---------->>>>>> //
								if (strchr(szBuffer,66))
								{
									color = 2;
									//salir del bucle
									fContinue = false;
								}

								// <<<<<<---------- 5.3 Parte Secuencia: COLOR VERDE ---------->>>>>> //
								if (strchr(szBuffer,71))
								{
									color = 3;
									//salir del bucle
									fContinue = false;
								}
							}
						}
						while (dwBytesRead == sizeof(szBuffer)-1);
					}
				}
				while (fContinue);
				// Close the port again
				serial.Close();
				robot.lock();
		  }
		  else if (goalNum == 15)
		  {
			  printf("Gira 180 grados derecha\n");
			  robot.unlock();
			  turn2.myActivate = 1;
			  turn2.myDirection = 2;
			  turn2.activate();
			  ArUtil::sleep(2000);
			  turn2.deactivate();
			  turn2.myActivate = 0;
			  turn2.myDirection = 0;
			  robot.lock();
		  }
		  else if (goalNum == 16)
		  {
			  if (color == 1)
			  {
				gotoPoseAction.setGoal(ArPose(3300, 413));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
			  if (color == 3)
			  {
				gotoPoseAction.setGoal(ArPose(3300, 1985));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
		  }
		  else if (goalNum == 17)
		  {
			  if (color == 1)
			  {
				gotoPoseAction.setGoal(ArPose(2800, 603));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
			  if (color == 3)
			  {
				gotoPoseAction.setGoal(ArPose(2800, 1795));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
		  }
		  else if (goalNum == 18)
		  {
			  if (color == 1)
			  {
				gotoPoseAction.setGoal(ArPose(2800, 860));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
			  if (color == 3)
			  {
				gotoPoseAction.setGoal(ArPose(2800, 1540));
				ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
				gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
			  }
		  }
		  else if (goalNum == 19)
		  {
			gotoPoseAction.setGoal(ArPose(2600, 1199));
			ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
			gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
		  }
		  else if (goalNum == 20)
		  {
			gotoPoseAction.setGoal(ArPose(1800, 1199));
			ArLog::log(ArLog::Normal, "Siguiente punto en %.0f %.0f", 
			gotoPoseAction.getGoal().getX(), gotoPoseAction.getGoal().getY());
		  }
		}

		if(start.mSecSince() >= duration) {
		  ArLog::log(ArLog::Normal, "No puede llegar al punto, y la aplicacion saldra en %d", duration/1000);
		  gotoPoseAction.cancelGoal();
		  robot.unlock();
		  ArUtil::sleep(3000);
		  break;
		}
	    
		robot.unlock();
		ArUtil::sleep(10);
	  }

	  // Robot desconectado al terminal el sleep
	  Aria::shutdown();

	//------------ F I N   M A I N    D E L   P R O G R A M A   D E L    R O B O T-----------//
    
    return 0;
}
int main(int argc, char **argv)
{
  bool done;
  double distToTravel = 2300;

  // whether to use the sim for the laser or not, if you use the sim
  // for hte laser, you have to use the sim for the robot too
  bool useSim = false;
  // the laser
  ArSick sick;
  // connection
  ArDeviceConnection *con;
  // Laser connection
  ArSerialConnection laserCon;
  // robot
  ArRobot robot;

  // set a default filename
  //std::string filename = "c:\\log\\1scans.2d";
  std::string filename = "1scans.2d";
  // see if we want to use a different filename
  //if (argc > 1)
  //Lfilename = argv[1];
  printf("Logging to file %s\n", filename.c_str());
  // start the logger with good values
  sick.configureShort(useSim, ArSick::BAUD38400,
		 ArSick::DEGREES180, ArSick::INCREMENT_HALF);
  ArSickLogger logger(&robot, &sick, 300, 25, filename.c_str());
  
  // mandatory init
  Aria::init();

  // add it to the robot
  robot.addRangeDevice(&sick);

  //ArAnalogGyro gyro(&robot);


  // if we're not using the sim, make a serial connection and set it up
  if (!useSim)
  {
    ArSerialConnection *serCon;
    serCon = new ArSerialConnection;
    serCon->setPort();
    //serCon->setBaud(38400);
    con = serCon;
  }
  // if we are using the sim, set up a tcp connection
  else
  {
    ArTcpConnection *tcpCon;
    tcpCon = new ArTcpConnection;
    tcpCon->setPort();
    con = tcpCon;
  }

  // set the connection on the robot
  robot.setDeviceConnection(con);
  // try to connect, if we fail exit
  if (!robot.blockingConnect())
  {
    printf("Could not connect to robot... exiting\n");
    Aria::shutdown();
    return 1;
  }


  // set up a key handler so escape exits and attach to the robot
  ArKeyHandler keyHandler;
  robot.attachKeyHandler(&keyHandler);

  // run the robot, true here so that the run will exit if connection lost
  robot.runAsync(true);



  // if we're not using the sim, set up the port for the laser
  if (!useSim)
  {
    laserCon.setPort(ArUtil::COM3);
    sick.setDeviceConnection(&laserCon);
  }


  // now that we're connected to the robot, connect to the laser
  sick.runAsync();


  if (!sick.blockingConnect())
  {
    printf("Could not connect to SICK laser... exiting\n");
    robot.disconnect();
    Aria::shutdown();
    return 1;
  }

#ifdef WIN32
  // wait until someone pushes the motor button to go
  while (1)
  {
    robot.lock();
    if (!robot.isRunning())
      exit(0);
    if (robot.areMotorsEnabled())
    {
      robot.unlock();
      break;
    }
    robot.unlock();
    ArUtil::sleep(100);
  }
#endif

  // basically from here on down the robot just cruises around a bit

  robot.lock();
  // enable the motors, disable amigobot sounds
  robot.comInt(ArCommands::ENABLE, 1);

  ArTime startTime;
  // move a couple meters
  robot.move(distToTravel);
  robot.unlock();
  startTime.setToNow();
  do {
    ArUtil::sleep(100);
    robot.lock();
    robot.setHeading(0);
    done = robot.isMoveDone(60);
    robot.unlock();
  } while (!done);

  /*
  // rotate a few times
  robot.lock();
  robot.setVel(0);
  robot.setRotVel(60);
  robot.unlock();
  ArUtil::sleep(12000);
  */

  robot.lock();
  robot.setHeading(180);
  robot.unlock();
  do {
    ArUtil::sleep(100);
    robot.lock();
    robot.setHeading(180);
    done = robot.isHeadingDone();
    robot.unlock();
  } while (!done);

  // move a couple meters
  robot.lock();
  robot.move(distToTravel);
  robot.unlock();
  startTime.setToNow();
  do {
    ArUtil::sleep(100);
    robot.lock();
    robot.setHeading(180);
    done = robot.isMoveDone(60);
    robot.unlock();
  } while (!done);

  robot.lock();
  robot.setHeading(0);
  robot.setVel(0);
  robot.unlock();
  startTime.setToNow();
  do {
    ArUtil::sleep(100);
    robot.lock();
    robot.setHeading(0);
    done = robot.isHeadingDone();
    robot.unlock();
  } while (!done);


  sick.lockDevice();
  sick.disconnect();
  sick.unlockDevice();
  robot.lock();
  robot.disconnect();
  robot.unlock();
  // now exit
  Aria::shutdown();
  return 0;
}
예제 #26
0
int main(int argc, char **argv)
{
  // mandatory init
  Aria::init();

  //ArLog::init(ArLog::StdOut, ArLog::Verbose);

  // set up our parser
  ArArgumentParser parser(&argc, argv);

  // load the default arguments 
  parser.loadDefaultArguments();

  // robot
  ArRobot robot;
  // set up our simple connector
  ArRobotConnector robotConnector(&parser, &robot);


  // add a gyro, it'll see if it should attach to the robot or not
  ArAnalogGyro gyro(&robot);


  // set up the robot for connecting
  if (!robotConnector.connectRobot())
  {
    printf("Could not connect to robot... exiting\n");
    Aria::exit(1);
  }

  ArDataLogger dataLogger(&robot, "dataLog.txt");
  dataLogger.addToConfig(Aria::getConfig());
  
  // our base server object
  ArServerBase server;

  ArLaserConnector laserConnector(&parser, &robot, &robotConnector);
  ArServerSimpleOpener simpleOpener(&parser);


  ArClientSwitchManager clientSwitchManager(&server, &parser);

  // parse the command line... fail and print the help if the parsing fails
  // or if the help was requested
  if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
  {    
    Aria::logOptions();
    Aria::exit(1);
  }

  // Set up where we'll look for files such as user/password 
  char fileDir[1024];
  ArUtil::addDirectories(fileDir, sizeof(fileDir), Aria::getDirectory(), 
			 "ArNetworking/examples");

  // first open the server up
  if (!simpleOpener.open(&server, fileDir, 240))
  {
    if (simpleOpener.wasUserFileBad())
      printf("Bad user/password/permissions file\n");
    else
      printf("Could not open server port\n");
    exit(1);
  }

  // Range devices:
 
 
  ArSonarDevice sonarDev;
  robot.addRangeDevice(&sonarDev);

  ArIRs irs;
  robot.addRangeDevice(&irs);

  ArBumpers bumpers;
  robot.addRangeDevice(&bumpers);

  // attach services to the server
  ArServerInfoRobot serverInfoRobot(&server, &robot);
  ArServerInfoSensor serverInfoSensor(&server, &robot);
  ArServerInfoDrawings drawings(&server);

  // modes for controlling robot movement
  ArServerModeStop modeStop(&server, &robot);
  ArServerModeRatioDrive modeRatioDrive(&server, &robot);  
  ArServerModeWander modeWander(&server, &robot);
  modeStop.addAsDefaultMode();
  modeStop.activate();

  // set up the simple commands
  ArServerHandlerCommands commands(&server);
  ArServerSimpleComUC uCCommands(&commands, &robot);  // send commands directly to microcontroller
  ArServerSimpleComMovementLogging loggingCommands(&commands, &robot); // control debug logging
  ArServerSimpleComGyro gyroCommands(&commands, &robot, &gyro); // configure gyro
  ArServerSimpleComLogRobotConfig configCommands(&commands, &robot); // control more debug logging
  ArServerSimpleServerCommands serverCommands(&commands, &server); // control ArNetworking debug logging
  ArServerSimpleLogRobotDebugPackets logRobotDebugPackets(&commands, &robot, ".");  // debugging tool

  // ArServerModeDrive is an older drive mode. ArServerModeRatioDrive is newer and generally performs better,
  // but you can use this for old clients if neccesary.
  //ArServerModeDrive modeDrive(&server, &robot);
  //modeDrive.addControlCommands(&commands); // configure the drive modes (e.g. enable/disable safe drive)

  ArServerHandlerConfig serverHandlerConfig(&server, Aria::getConfig()); // make a config handler
  ArLog::addToConfig(Aria::getConfig()); // let people configure logging

  modeRatioDrive.addToConfig(Aria::getConfig(), "Teleop settings"); // able to configure teleop settings
  modeRatioDrive.addControlCommands(&commands);

  // Forward video if either ACTS or SAV server are running.
  // You can find out more about SAV and ACTS on our website
  // http://robots.activmedia.com. ACTS is for color tracking and is
  // a separate product. SAV just does software A/V transmitting and is
  // free to all our customers. Just run ACTS or SAV server before you
  // start this program and this class here will forward video from the
  // server to the client.
  ArHybridForwarderVideo videoForwarder(&server, "localhost", 7070);
  
  // Control a pan/tilt/zoom camera, if one is installed, and the video
  // forwarder was enabled above.
  ArPTZ *camera = NULL;
  ArServerHandlerCamera *handlerCamera = NULL;
  ArCameraCollection *cameraCollection = NULL;
  if (videoForwarder.isForwardingVideo())
  {
    bool invertedCamera = false;
    camera = new ArVCC4(&robot,	invertedCamera, 
			ArVCC4::COMM_UNKNOWN, true, true);
    camera->init();

    cameraCollection = new ArCameraCollection();
    cameraCollection->addCamera("Cam1", "VCC4", "Camera", "VCC4");
    handlerCamera = new ArServerHandlerCamera("Cam1", 
		                              &server, 
					      &robot,
					      camera, 
					      cameraCollection);
  }

  // You can use this class to send a set of arbitrary strings 
  // for MobileEyes to display, this is just a small example
  ArServerInfoStrings stringInfo(&server);
  Aria::getInfoGroup()->addAddStringCallback(stringInfo.getAddStringFunctor());
  Aria::getInfoGroup()->addStringInt(
	  "Motor Packet Count", 10, 
	  new ArConstRetFunctorC<int, ArRobot>(&robot, 
					       &ArRobot::getMotorPacCount));
  /*
  Aria::getInfoGroup()->addStringInt(
	  "Laser Packet Count", 10, 
	  new ArRetFunctorC<int, ArSick>(&sick, 
					 &ArSick::getSickPacCount));
  */
  
  // start the robot running, true means that if we lose connection the run thread stops
  robot.runAsync(true);


  // connect the laser(s) if it was requested
  if (!laserConnector.connectLasers())
  {
    printf("Could not connect to lasers... exiting\n");
    Aria::exit(2);
  }
  

  drawings.addRobotsRangeDevices(&robot);

  // log whatever we wanted to before the runAsync
  simpleOpener.checkAndLog();
  // now let it spin off in its own thread
  server.runAsync();

  printf("Server is now running...\n");

  // Add a key handler so that you can exit by pressing
  // escape. Note that a key handler prevents you from running
  // a program in the background on Linux, since it expects an 
  // active terminal to read keys from; remove this if you want
  // to run it in the background.
  ArKeyHandler *keyHandler;
  if ((keyHandler = Aria::getKeyHandler()) == NULL)
  {
    keyHandler = new ArKeyHandler;
    Aria::setKeyHandler(keyHandler);
    robot.lock();
    robot.attachKeyHandler(keyHandler);
    robot.unlock();
    printf("To exit, press escape.\n");
  }

  // Read in parameter files.
  std::string configFile = "serverDemoConfig.txt";
  Aria::getConfig()->setBaseDirectory("./");
  if (Aria::getConfig()->parseFile(configFile.c_str(), true, true))
  {
    ArLog::log(ArLog::Normal, "Loaded config file %s", configFile.c_str());
  }
  else
  {
    if (ArUtil::findFile(configFile.c_str()))
    {
      ArLog::log(ArLog::Normal, 
		 "Trouble loading configuration file %s, continuing",
		 configFile.c_str());
    }
    else
    {
      ArLog::log(ArLog::Normal, 
		 "No configuration file %s, will try to create if config used",
		 configFile.c_str());
    }
  }

  clientSwitchManager.runAsync();

  robot.lock();
  robot.enableMotors();
  robot.unlock();

  robot.waitForRunExit();
  Aria::exit(0);
}
ArActionDesired* ActionReadSonar::fire(ArActionDesired currentDesired)
{


	ArRobot *robot = this->getRobot();
	
	int total = robot->getNumSonar(); // get the total number of sonar on the robot
	ArSensorReading* value; // This class abstracts range and angle read from sonar

	//cout << " 0 : " << robot->getSonarReading(0)->getSensorTh() << " 1 : " << robot->getSonarReading(1)->getSensorTh() 
	//	 << " 2 : " << robot->getSonarReading(2)->getSensorTh() << " 3 : " << robot->getSonarReading(3)->getSensorTh()
	//	 << " 4 : " << robot->getSonarReading(4)->getSensorTh() << " 5 : " << robot->getSonarReading(5)->getSensorTh()
	//	 << " 6 : " << robot->getSonarReading(6)->getSensorTh() << " 7 : " << robot->getSonarReading(7)->getSensorTh()
		 
	//	 << "r :" << robot->getTh() << endl;


	double limit = 800;
	double distance;

	// reset the actionDesired (must be done), to clear
	// its previous values.
	myDesired.reset();

	// if the sonar is null we can't do anything, so deactivate
	if (mySonar == NULL)
	{
		deactivate();
		return NULL;
	}

	// gets value of object between -20 degrees and 20 degrees of foward
	double angle = 0;
	distance = mySonar->currentReadingPolar(-20, 20, &angle);
	//cout << "distance from nearest object =" << distance << endl;
	

	if (distance <= limit) {
		int heading = 15;

		//cout << "angle :" << angle << endl;
		if (angle > 10) {
			heading = -heading;
		}
		else if (angle < -10) {
			heading = heading;
		}
		
		//cout << "x" << robot->getX() << " ," << robot->getY() << endl;
		cout << "distance from nearest object =" << distance << endl;

		
		robot->lock();
		robot->setVel(0);
		robot->unlock();

		robot->lock();
		robot->setDeltaHeading(heading);
		robot->unlock();

		ArUtil::sleep(50);
	}

	return &myDesired;
}
예제 #28
0
int main ( int argc, char *argv[] ){
//cout << "running....\n";
try{
	// Create the socket
	ServerSocket server ( 30000 );

	Aria::init();
	Arnl::init();

	ArRobot robot;
	ArArgumentParser parser(&argc, argv);
	parser.loadDefaultArguments();
	ArSonarDevice sonar;
	ArSimpleConnector simpleConnector(&parser);

	// Our server for mobile eyes
	ArServerBase moServer;

	// Set up our simpleOpener
	ArServerSimpleOpener simpleOpener(&parser);

	parser.loadDefaultArguments();
  	if (!Aria::parseArgs () || !parser.checkHelpAndWarnUnparsed()){
    		Aria::logOptions ();
   		Aria::exit (1);
  	}

	//Add the sonar to the robot
	robot.addRangeDevice(&sonar);

  	// Look for map in the current directory
  	ArMap arMap;
  	// set it up to ignore empty file names (otherwise the parseFile
  	// on the config will fail)
  	arMap.setIgnoreEmptyFileName (true);

	// First open the server 
	if (!simpleOpener.open(&moServer)){
		if (simpleOpener.wasUserFileBad())
    			ArLog::log(ArLog::Normal, "Bad user file");
		else
    			ArLog::log(ArLog::Normal, "Could not open server port");
  		exit(2);
	}

        // Connect to the robot
        if (!simpleConnector.connectRobot (&robot)){
                ArLog::log (ArLog::Normal, "Could not connect to robot... exiting");
                Aria::exit (3);
        }

	// Create the localization task (it will start its own thread here)
	ArSonarLocalizationTask locTask(&robot, &sonar, &arMap);

	ArLocalizationManager locManager(&robot, &arMap);

	ArLog::log(ArLog::Normal, "Creating sonar localization task");
	locManager.addLocalizationTask(&locTask);




	// Set the initial pose to the robot's "Home" position from the map, or
	// (0,0,0) if none, then let the localization thread take over.
	locTask.localizeRobotAtHomeNonBlocking();

	//Create the path planning task
	ArPathPlanningTask pathTask(&robot,&sonar,&arMap);

	ArLog::log(ArLog::Normal, "Robot Server: Connected.");

	robot.enableMotors();
	robot.clearDirectMotion();

	// Start the robot processing cycle running in the background.
	// True parameter means that if the connection is lost, then the
	// run loop ends.
	robot.runAsync(true);

	// Read in parameter files.
  	Aria::getConfig ()->useArgumentParser (&parser);
  	if (!Aria::getConfig ()->parseFile (Arnl::getTypicalParamFileName ())){
		ArLog::log (ArLog::Normal, "Trouble loading configuration file, exiting");
		Aria::exit (5);
	}

	//Create the three states
	robot.lock();
	Follow follow = Follow(&robot,&sonar);
	GoTo goTo(&robot,&pathTask,&arMap);
	Search s(&robot,&sonar);

	// Bumpers.
  	ArBumpers bumpers;
  	robot.addRangeDevice(&bumpers);
  	pathTask.addRangeDevice(&bumpers, ArPathPlanningTask::CURRENT);

  	// Forbidden regions from the map
  	ArForbiddenRangeDevice forbidden(&arMap);
  	robot.addRangeDevice(&forbidden);
  	pathTask.addRangeDevice(&forbidden, ArPathPlanningTask::CURRENT);

  	// Mode To stop and remain stopped:
  	ArServerModeStop modeStop(&moServer, &robot);

  	// Action to slow down robot when localization score drops but not lost.
  	ArActionSlowDownWhenNotCertain actionSlowDown(&locTask);
  	pathTask.getPathPlanActionGroup()->addAction(&actionSlowDown, 140);

  	// Action to stop the robot when localization is "lost" (score too low)
  	ArActionLost actionLostPath(&locTask, &pathTask);
  	pathTask.getPathPlanActionGroup()->addAction(&actionLostPath, 150);

	// These provide various kinds of information to the client:
	ArServerInfoRobot serverInfoRobot(&moServer, &robot);
	ArServerInfoSensor serverInfoSensor(&moServer, &robot);
	ArServerInfoPath serverInfoPath(&moServer, &robot, &pathTask);
	
	// Provide the map to the client (and related controls):
	// This uses both lines and points now, since everything except
	// sonar localization uses both (path planning with sonar still uses both)
  	ArServerHandlerMap serverMap(&moServer, &arMap);
	
	// Provides localization info and allows the client (MobileEyes) to relocalize at a given
	// pose:
	ArServerInfoLocalization serverInfoLocalization(&moServer, &robot, &locTask);
	ArServerHandlerLocalization serverLocHandler(&moServer, &robot, &locTask);

	robot.unlock();

	moServer.runAsync();

	//Main loop
	while (true){
		//The socket to accept connection
		ServerSocket new_sock;
		server.accept ( new_sock );
		int state = 1;		//1 = Follow, 2 = Search, 3 = GoTo
		int lastPos[2];		//Storing last position of BB to search the target
		int data[2];		//matrix with X,Y of BB
		try{
			while ( true ){
				//receive data from tld
				new_sock >> data;
				//cout << data[0] << "," << data[1] << endl;

				if(data[0] != -1)
					lastPos[0] = data[0];

				//cout << state <<endl; //for debugging
				//Main logic
				switch(state){

					case 1:
						cout << "Following target\n";
						state = follow.run(data);
					break;
					case 2:
						cout << "Searching for target\n";
						state = s.seek(lastPos, data);
					break;
					case 3:
						cout << "Going to ...\n";
						state = goTo.run(data);
					break;
					default:
						cout << "Not a case for state\n";
					break;
				}
				std::cout << "Loc score: " << locTask.getLocalizationScore() << std::endl;
			}
		}
		catch ( SocketException& ) {
			cout << "Lost Connection" << endl;
			robot.lock();
			robot.stop();
			robot.unlock();
		}
	}
}
catch ( SocketException& e ){
	std::cout << "Exception was caught:" << e.description() << "\nExiting.\n";
}

ArLog::log(ArLog::Normal, "RobotServer: Exiting.");
return 0;
}
예제 #29
0
파일: demo.cpp 프로젝트: sauver/sauver_sys
int main(int argc, char** argv)
{
  // Initialize some global data
  Aria::init();

  // If you want ArLog to print "Verbose" level messages uncomment this:
  //ArLog::init(ArLog::StdOut, ArLog::Verbose);

  // This object parses program options from the command line
  ArArgumentParser parser(&argc, argv);

  // Load some default values for command line arguments from /etc/Aria.args
  // (Linux) or the ARIAARGS environment variable.
  parser.loadDefaultArguments();

  // Central object that is an interface to the robot and its integrated
  // devices, and which manages control of the robot by the rest of the program.
  ArRobot robot;

  // Object that connects to the robot or simulator using program options
  ArRobotConnector robotConnector(&parser, &robot);

  // If the robot has an Analog Gyro, this object will activate it, and 
  // if the robot does not automatically use the gyro to correct heading,
  // this object reads data from it and corrects the pose in ArRobot
  ArAnalogGyro gyro(&robot);

  // Connect to the robot, get some initial data from it such as type and name,
  // and then load parameter files for this robot.
  if (!robotConnector.connectRobot())
  {
    // Error connecting:
    // if the user gave the -help argumentp, then just print out what happened,
    // and continue so options can be displayed later.
    if (!parser.checkHelpAndWarnUnparsed())
    {
      ArLog::log(ArLog::Terse, "Could not connect to robot, will not have parameter file so options displayed later may not include everything");
    }
    // otherwise abort
    else
    {
      ArLog::log(ArLog::Terse, "Error, could not connect to robot.");
      Aria::logOptions();
      Aria::exit(1);
    }
  }

  // Connector for laser rangefinders
  ArLaserConnector laserConnector(&parser, &robot, &robotConnector);

  // Connector for compasses
  ArCompassConnector compassConnector(&parser);

  // Parse the command line options. Fail and print the help message if the parsing fails
  // or if the help was requested with the -help option
  if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
  {    
    Aria::logOptions();
    exit(1);
  }

  // Used to access and process sonar range data
  ArSonarDevice sonarDev;
  
  // Used to perform actions when keyboard keys are pressed
  ArKeyHandler keyHandler;
  Aria::setKeyHandler(&keyHandler);

  // ArRobot contains an exit action for the Escape key. It also 
  // stores a pointer to the keyhandler so that other parts of the program can
  // use the same keyhandler.
  robot.attachKeyHandler(&keyHandler);
  printf("You may press escape to exit\n");

  // Attach sonarDev to the robot so it gets data from it.
  robot.addRangeDevice(&sonarDev);

  
  // Start the robot task loop running in a new background thread. The 'true' argument means if it loses
  // connection the task loop stops and the thread exits.
  robot.runAsync(true);

  // Connect to the laser(s) if lasers were configured in this robot's parameter
  // file or on the command line, and run laser processing thread if applicable
  // for that laser class.  (For the purposes of this demo, add all
  // possible lasers to ArRobot's list rather than just the ones that were
  // specified with the connectLaser option (so when you enter laser mode, you
  // can then interactively choose which laser to use from the list which will
  // show both connected and unconnected lasers.)
  if (!laserConnector.connectLasers(false, false, true))
  {
    printf("Could not connect to lasers... exiting\n");
    Aria::exit(2);
  }

  // Create and connect to the compass if the robot has one.
  ArTCM2 *compass = compassConnector.create(&robot);
  if(compass && !compass->blockingConnect()) {
    compass = NULL;
  }
  
  // Sleep for a second so some messages from the initial responses
  // from robots and cameras and such can catch up
  ArUtil::sleep(1000);

  // We need to lock the robot since we'll be setting up these modes
  // while the robot task loop thread is already running, and they 
  // need to access some shared data in ArRobot.
  robot.lock();

  // now add all the modes for this demo
  // these classes are defined in ArModes.cpp in ARIA's source code.
  ArModeLaser laser(&robot, "laser", 'l', 'L');
  ArModeTeleop teleop(&robot, "teleop", 't', 'T');
  ArModeUnguardedTeleop unguardedTeleop(&robot, "unguarded teleop", 'u', 'U');
  ArModeWander wander(&robot, "wander", 'w', 'W');
  ArModeGripper gripper(&robot, "gripper", 'g', 'G');
  ArModeCamera camera(&robot, "camera", 'c', 'C');
  ArModeSonar sonar(&robot, "sonar", 's', 'S');
  ArModeBumps bumps(&robot, "bumps", 'b', 'B');
  ArModePosition position(&robot, "position", 'p', 'P', &gyro);
  ArModeIO io(&robot, "io", 'i', 'I');
  ArModeActs actsMode(&robot, "acts", 'a', 'A');
  ArModeCommand command(&robot, "command", 'd', 'D');
  ArModeTCM2 tcm2(&robot, "tcm2", 'm', 'M', compass);


  // activate the default mode
  teleop.activate();

  // turn on the motors
  robot.comInt(ArCommands::ENABLE, 1);

  robot.unlock();
  
  // Block execution of the main thread here and wait for the robot's task loop
  // thread to exit (e.g. by robot disconnecting, escape key pressed, or OS
  // signal)
  robot.waitForRunExit();

  Aria::exit(0);


}
예제 #30
0
int main(int argc, char** argv)
{
    ros::init(argc, argv, "terabot_arm_hardware_interface");
    ros::NodeHandle node;
    std::cout << "argc= "<<argc<<" argv= "<<argv<<std::endl;
    hardware_interface::JointStateInterface jnt_state_interface_;
    hardware_interface::PositionJointInterface jnt_pos_interface_;

    //**********************************************************
    //**********************************************************
     Aria::init();
      static float defaultJointSpeed = 15;
      ArLog::init(ArLog::StdErr, ArLog::Normal);
      ArArgumentParser parser(&argc, argv);
      parser.loadDefaultArguments();
      ArRobot robot;
      ArTerabotArm arm(&robot);
      

      
      
      ArRobotConnector robotConnector(&parser, &robot);

      if(!robotConnector.connectRobot())
      {
        ArLog::log(ArLog::Terse, "terabotArm: Could not connect to the robot.");
        if(parser.checkHelpAndWarnUnparsed())
        {
            Aria::logOptions();
            Aria::exit(1);
        }
      }
      if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
      {
        Aria::logOptions();
        Aria::exit(1);
      }

      ArLog::log(ArLog::Normal, "terabotArm: Connected to mobile robot.");


      if(!arm.open())
      {
          ArLog::log(ArLog::Terse, "terabotArm: Error opening serial connection to arm");
          Aria::exit(1);
      }


      robot.runAsync(true);
      
      arm.powerOn();
      arm.reset();
      arm.enable();
      arm.setAllJointSpeeds(defaultJointSpeed);
     
      ArUtil::sleep(5000);
      
      robot.lock();
  
      robot.enableMotors(); 
      robot.unlock();
    
    
    
      TerabotArmInterface robot1(&robot, &arm, node);   
    
    //**********************************************************
    //**********************************************************
    
  //  TerabotArmInterface robot1(&robot, &arm);
    std::cout << "after creating the object"<<std::endl;
    robot1.init(jnt_state_interface_, jnt_pos_interface_);
    controller_manager::ControllerManager cm(&robot1, node);
    


    ros::AsyncSpinner spinner(4);
    spinner.start();

    ros::Time previous=ros::Time::now();

    ros::Rate rate(10.0);
    while (ros::ok())
    {
        ros::Duration period;
        robot1.readHW();
        ros::Time now=ros::Time::now();
        period=now-previous;
        //std::cout << "period:"<<period<<std::endl;
        cm.update(now, period);
        robot1.writeHW();
        rate.sleep();

    }

    spinner.stop();

    return 0;
}