void TestValidate()
{
// Load a 2D square mesh with 1 central non-boundary node
TrianglesMeshReader<2,2> mesh_reader("mesh/test/data/square_4_elements");
TetrahedralMesh<2,2> mesh;
mesh.ConstructFromMeshReader(mesh_reader);
BoundaryConditionsContainer<2,2,1> bcc;
// No BCs yet, so shouldn't validate
TS_ASSERT(!bcc.Validate(&mesh));
// Add some BCs
ConstBoundaryCondition<2> *bc = new ConstBoundaryCondition<2>(0.0);
bcc.AddDirichletBoundaryCondition(mesh.GetNode(0), bc);
bcc.AddDirichletBoundaryCondition(mesh.GetNode(1), bc);
bcc.AddDirichletBoundaryCondition(mesh.GetNode(3), bc);
TetrahedralMesh<2,2>::BoundaryElementIterator iter
= mesh.GetBoundaryElementIteratorEnd();
iter--;
bcc.AddNeumannBoundaryCondition(*iter, bc); // 2 to 3
iter--;
bcc.AddNeumannBoundaryCondition(*iter, bc); // 1 to 2
TS_ASSERT(bcc.Validate(&mesh));
}
/* Define a particular test. Note the {{{throw(Exception)}}} at the end of the
* declaration. This causes {{{Exception}}} messages to be printed out if an
* {{{Exception}}} is thrown, rather than just getting the message "terminate
* called after throwing an instance of 'Exception' " */
void TestSolvingNonlinearEllipticPde() throw(Exception)
{
/* As usual, first create a mesh. */
TrianglesMeshReader<2,2> mesh_reader("mesh/test/data/square_128_elements");
TetrahedralMesh<2,2> mesh;
mesh.ConstructFromMeshReader(mesh_reader);
/* Next, instantiate the PDE to be solved. */
MyNonlinearPde pde;
/*
* Then we have to define the boundary conditions. First, the Dirichlet boundary
* condition, u=0 on x=0, using the boundary node iterator.
*/
BoundaryConditionsContainer<2,2,1> bcc;
ConstBoundaryCondition<2>* p_zero_bc = new ConstBoundaryCondition<2>(0.0);
for (TetrahedralMesh<2,2>::BoundaryNodeIterator node_iter = mesh.GetBoundaryNodeIteratorBegin();
node_iter != mesh.GetBoundaryNodeIteratorEnd();
node_iter++)
{
if (fabs((*node_iter)->GetPoint()[1]) < 1e-12)
{
bcc.AddDirichletBoundaryCondition(*node_iter, p_zero_bc);
}
}
/* And then the Neumman conditions. Neumann boundary condition are defined on
* surface elements, and for this problem, the Neumman boundary value depends
* on the position in space, so we make use of the {{{FunctionalBoundaryCondition}}}
* object, which contains a pointer to a function, and just returns the value
* of that function for the required point when the {{{GetValue}}} method is called.
*/
FunctionalBoundaryCondition<2>* p_functional_bc = new FunctionalBoundaryCondition<2>(&MyNeummanFunction);
/* Loop over surface elements. */
for (TetrahedralMesh<2,2>::BoundaryElementIterator elt_iter = mesh.GetBoundaryElementIteratorBegin();
elt_iter != mesh.GetBoundaryElementIteratorEnd();
elt_iter++)
{
/* Get the y value of any node (here, the zero-th). */
double y = (*elt_iter)->GetNodeLocation(0,1);
/* If y=1... */
if (fabs(y-1.0) < 1e-12)
{
/* ... then associate the functional boundary condition, (Dgradu).n = y,
* with the surface element... */
bcc.AddNeumannBoundaryCondition(*elt_iter, p_functional_bc);
}
else
{
/* ...else associate the zero boundary condition (i.e. zero flux) with this
* element. */
bcc.AddNeumannBoundaryCondition(*elt_iter, p_zero_bc);
}
}
/* Note that in the above loop, the zero Neumman boundary condition was applied
* to all surface elements for which y!=1, which included the Dirichlet surface
* y=0. This is OK, as Dirichlet boundary conditions are applied to the finite
* element matrix after Neumman boundary conditions, where the appropriate rows
* in the matrix are overwritten.
*
* This is the solver for solving nonlinear problems, which, as usual,
* takes in the mesh, the PDE, and the boundary conditions. */
SimpleNonlinearEllipticSolver<2,2> solver(&mesh, &pde, &bcc);
/* The solver also needs to be given an initial guess, which will be
* a PETSc vector. We can make use of a helper method to create it.
*/
Vec initial_guess = PetscTools::CreateAndSetVec(mesh.GetNumNodes(), 0.25);
/* '''Optional:''' To use Chaste's Newton solver to solve nonlinear vector equations that are
* assembled, rather than the default PETSc nonlinear solvers, we can
* do the following: */
SimpleNewtonNonlinearSolver newton_solver;
solver.SetNonlinearSolver(&newton_solver);
/* '''Optional:''' We can also manually set tolerances, and whether to print statistics, with
* this nonlinear vector equation solver */
newton_solver.SetTolerance(1e-10);
newton_solver.SetWriteStats();
/* Now call {{{Solve}}}, passing in the initial guess */
Vec answer = solver.Solve(initial_guess);
/* Note that we could have got the solver to not use an analytical Jacobian
* and use a numerically-calculated Jacobian instead, by passing in false as a second
* parameter:
*/
//Vec answer = solver.Solve(initial_guess, false);
/* Once solved, we can check the obtained solution against the analytical
* solution. */
ReplicatableVector answer_repl(answer);
for (unsigned i=0; i<answer_repl.GetSize(); i++)
{
double y = mesh.GetNode(i)->GetPoint()[1];
double exact_u = sqrt(y*(4-y));
TS_ASSERT_DELTA(answer_repl[i], exact_u, 0.15);
}
/* Finally, we have to remember to destroy the PETSc {{{Vec}}}s. */
PetscTools::Destroy(initial_guess);
PetscTools::Destroy(answer);
}
/*
* Define a particular test.
*/
void TestSchnackenbergSystemOnButterflyMesh() throw (Exception)
{
/* As usual, we first create a mesh. Here we are using a 2d mesh of a butterfly-shaped domain. */
TrianglesMeshReader<2,2> mesh_reader("mesh/test/data/butterfly");
TetrahedralMesh<2,2> mesh;
mesh.ConstructFromMeshReader(mesh_reader);
/* We scale the mesh to an appropriate size. */
mesh.Scale(0.2, 0.2);
/* Next, we instantiate the PDE system to be solved. We pass the parameter values into the
* constructor. (The order is D,,1,, D,,2,, k,,1,, k,,-1,, k,,2,, k,,3,,) */
SchnackenbergCoupledPdeSystem<2> pde(1e-4, 1e-2, 0.1, 0.2, 0.3, 0.1);
/*
* Then we have to define the boundary conditions. As we are in 2d, {{{SPACE_DIM}}}=2 and
* {{{ELEMENT_DIM}}}=2. We also have two unknowns u and v,
* so in this case {{{PROBLEM_DIM}}}=2. The value of each boundary condition is
* given by the spatially uniform steady state solution of the Schnackenberg system,
* given by u = (k,,1,, + k,,2,,)/k,,-1,,, v = k,,2,,k,,-1,,^2^/k,,3,,(k,,1,, + k,,2,,)^2^.
*/
BoundaryConditionsContainer<2,2,2> bcc;
ConstBoundaryCondition<2>* p_bc_for_u = new ConstBoundaryCondition<2>(2.0);
ConstBoundaryCondition<2>* p_bc_for_v = new ConstBoundaryCondition<2>(0.75);
for (TetrahedralMesh<2,2>::BoundaryNodeIterator node_iter = mesh.GetBoundaryNodeIteratorBegin();
node_iter != mesh.GetBoundaryNodeIteratorEnd();
++node_iter)
{
bcc.AddDirichletBoundaryCondition(*node_iter, p_bc_for_u, 0);
bcc.AddDirichletBoundaryCondition(*node_iter, p_bc_for_v, 1);
}
/* This is the solver for solving coupled systems of linear parabolic PDEs and ODEs,
* which takes in the mesh, the PDE system, the boundary conditions and optionally
* a vector of ODE systems (one for each node in the mesh). Since in this example
* we are solving a system of coupled PDEs only, we do not supply this last argument. */
LinearParabolicPdeSystemWithCoupledOdeSystemSolver<2,2,2> solver(&mesh, &pde, &bcc);
/* Then we set the end time and time step and the output directory to which results will be written. */
double t_end = 10;
solver.SetTimes(0, t_end);
solver.SetTimeStep(1e-1);
solver.SetSamplingTimeStep(1);
solver.SetOutputDirectory("TestSchnackenbergSystemOnButterflyMesh");
/* We create a vector of initial conditions for u and v that are random perturbations
* of the spatially uniform steady state and pass this to the solver. */
std::vector<double> init_conds(2*mesh.GetNumNodes());
for (unsigned i=0; i<mesh.GetNumNodes(); i++)
{
init_conds[2*i] = fabs(2.0 + RandomNumberGenerator::Instance()->ranf());
init_conds[2*i + 1] = fabs(0.75 + RandomNumberGenerator::Instance()->ranf());
}
Vec initial_condition = PetscTools::CreateVec(init_conds);
solver.SetInitialCondition(initial_condition);
/* We now solve the PDE system and write results to VTK files, for
* visualization using Paraview. Results will be written to CHASTE_TEST_OUTPUT/TestSchnackenbergSystemOnButterflyMesh
* as a results.pvd file and several results_[time].vtu files.
* You should see something like [[Image(u.png, 350px)]] for u and [[Image(v.png, 350px)]] for v.
*/
solver.SolveAndWriteResultsToFile();
/*
* All PETSc {{{Vec}}}s should be destroyed when they are no longer needed.
*/
PetscTools::Destroy(initial_condition);
}
/**
* This test provides an example of how to solve a coupled PDE system
* where there is no coupled ODE system, and can be used as a template
* for solving standard reaction-diffusion problems arising in the
* study of pattern formation on fixed domains.
*/
void TestSchnackenbergCoupledPdeSystemIn1dWithNonZeroDirichlet()
{
// Create mesh of domain [0,1]
TrianglesMeshReader<1,1> mesh_reader("mesh/test/data/1D_0_to_1_1000_elements");
TetrahedralMesh<1,1> mesh;
mesh.ConstructFromMeshReader(mesh_reader);
// Create PDE system object
SchnackenbergCoupledPdeSystem<1> pde(1e-4, 1e-2, 0.1, 0.2, 0.3, 0.1);
// Create non-zero Dirichlet boundary conditions for each state variable
BoundaryConditionsContainer<1,1,2> bcc;
ConstBoundaryCondition<1>* p_bc_for_u = new ConstBoundaryCondition<1>(2.0);
ConstBoundaryCondition<1>* p_bc_for_v = new ConstBoundaryCondition<1>(0.75);
bcc.AddDirichletBoundaryCondition(mesh.GetNode(0), p_bc_for_u, 0);
bcc.AddDirichletBoundaryCondition(mesh.GetNode(0), p_bc_for_v, 1);
bcc.AddDirichletBoundaryCondition(mesh.GetNode(mesh.GetNumNodes()-1), p_bc_for_u, 0);
bcc.AddDirichletBoundaryCondition(mesh.GetNode(mesh.GetNumNodes()-1), p_bc_for_v, 1);
// Create PDE system solver
LinearParabolicPdeSystemWithCoupledOdeSystemSolver<1,1,2> solver(&mesh, &pde, &bcc);
// Set end time and time step
double t_end = 10;
solver.SetTimes(0, t_end);
solver.SetTimeStep(1e-1);
// Create initial conditions that are random perturbations of the uniform steady state
std::vector<double> init_conds(2*mesh.GetNumNodes());
for (unsigned i=0; i<mesh.GetNumNodes(); i++)
{
init_conds[2*i] = fabs(2.0 + RandomNumberGenerator::Instance()->ranf());
init_conds[2*i + 1] = fabs(0.75 + RandomNumberGenerator::Instance()->ranf());
}
Vec initial_condition = PetscTools::CreateVec(init_conds);
solver.SetInitialCondition(initial_condition);
// Solve PDE system and store result
Vec solution = solver.Solve();
ReplicatableVector solution_repl(solution);
// Write results for visualization in gnuplot
OutputFileHandler handler("TestSchnackenbergCoupledPdeSystemIn1dWithNonZeroDirichlet", false);
out_stream results_file = handler.OpenOutputFile("schnackenberg.dat");
for (unsigned i=0; i<mesh.GetNumNodes(); i++)
{
double x = mesh.GetNode(i)->rGetLocation()[0];
double u = solution_repl[2*i];
double v = solution_repl[2*i + 1];
(*results_file) << x << "\t" << u << "\t" << v << "\n" << std::flush;
}
results_file->close();
std::string results_filename = handler.GetOutputDirectoryFullPath() + "schnackenberg.dat";
NumericFileComparison comp_results(results_filename, "pde/test/data/schnackenberg.dat");
TS_ASSERT(comp_results.CompareFiles(1e-3));
// Tidy up
PetscTools::Destroy(initial_condition);
PetscTools::Destroy(solution);
}
void TestHeatEquationWithCoupledOdeSystemIn1dWithMixed()
{
// Create mesh of domain [0,1]
TrianglesMeshReader<1,1> mesh_reader("mesh/test/data/1D_0_to_1_100_elements");
TetrahedralMesh<1,1> mesh;
mesh.ConstructFromMeshReader(mesh_reader);
// Create PDE system object
HeatEquationForCoupledOdeSystem<1> pde;
// Define non-zero Neumann boundary condition at x=0
BoundaryConditionsContainer<1,1,1> bcc;
ConstBoundaryCondition<1>* p_boundary_condition = new ConstBoundaryCondition<1>(1.0);
TetrahedralMesh<1,1>::BoundaryElementIterator iter = mesh.GetBoundaryElementIteratorBegin();
bcc.AddNeumannBoundaryCondition(*iter, p_boundary_condition);
// Define zero Dirichlet boundary condition at x=1
ConstBoundaryCondition<1>* p_boundary_condition2 = new ConstBoundaryCondition<1>(0.0);
TetrahedralMesh<1,1>::BoundaryNodeIterator node_iter = mesh.GetBoundaryNodeIteratorEnd();
--node_iter;
bcc.AddDirichletBoundaryCondition(*node_iter, p_boundary_condition2);
// Create the correct number of ODE systems
double a = 5.0;
std::vector<AbstractOdeSystemForCoupledPdeSystem*> ode_systems;
for (unsigned i=0; i<mesh.GetNumNodes(); i++)
{
ode_systems.push_back(new OdeSystemForCoupledHeatEquation(a));
}
// Create PDE system solver
LinearParabolicPdeSystemWithCoupledOdeSystemSolver<1,1,1> solver(&mesh, &pde, &bcc, ode_systems);
// Set end time and timestep
double t_end = 0.1;
solver.SetTimes(0, t_end);
solver.SetTimeStep(0.001);
// Set initial condition u(x,0) = 1 - x
std::vector<double> init_cond(mesh.GetNumNodes());
for (unsigned i=0; i<mesh.GetNumNodes(); i++)
{
double x = mesh.GetNode(i)->GetPoint()[0];
init_cond[i] = 1 - x;
}
Vec initial_condition = PetscTools::CreateVec(init_cond);
solver.SetInitialCondition(initial_condition);
// Solve PDE system and store result
Vec result = solver.Solve();
ReplicatableVector result_repl(result);
/*
* Test that solution is given by
*
* u(x,t) = 1 - x,
* v(x,t) = 1 + a*(1-x)*t,
*
* with t = t_end.
*/
for (unsigned i=0; i<result_repl.GetSize(); i++)
{
double x = mesh.GetNode(i)->GetPoint()[0];
double u = 1 - x;
TS_ASSERT_DELTA(result_repl[i], u, 0.1);
double v = 1 + a*(1-x)*t_end;
TS_ASSERT_DELTA(ode_systems[i]->rGetStateVariables()[0], v, 0.1);
}
// Tidy up
PetscTools::Destroy(initial_condition);
PetscTools::Destroy(result);
}
void TestSolvingEllipticPde() throw(Exception)
{
/* First we declare a mesh reader which reads mesh data files of the 'Triangle'
* format. The path given is relative to the main Chaste directory. As we are in 2d,
* the reader will look for three datafiles, [name].nodes, [name].ele and [name].edge.
* Note that the first template argument here is the spatial dimension of the
* elements in the mesh ({{{ELEMENT_DIM}}}), and the second is the dimension of the nodes,
* i.e. the dimension of the space the mesh lives in ({{{SPACE_DIM}}}). Usually
* {{{ELEMENT_DIM}}} and {{{SPACE_DIM}}} will be equal. */
TrianglesMeshReader<2,2> mesh_reader("mesh/test/data/square_128_elements");
/* Now declare a tetrahedral mesh with the same dimensions... */
TetrahedralMesh<2,2> mesh;
/* ... and construct the mesh using the mesh reader. */
mesh.ConstructFromMeshReader(mesh_reader);
/* Next we instantiate an instance of our PDE we wish to solve. */
MyPde pde;
/* A set of boundary conditions are stored in a {{{BoundaryConditionsContainer}}}. The
* three template arguments are ELEMENT_DIM, SPACE_DIM and PROBLEM_DIM, the latter being
* the number of unknowns we are solving for. We have one unknown (ie u is a scalar, not
* a vector), so in this case {{{PROBLEM_DIM}}}=1. */
BoundaryConditionsContainer<2,2,1> bcc;
/* Defining the boundary conditions is the only particularly fiddly part of solving PDEs,
* unless they are very simple, such as u=0 on the boundary, which could be done
* as follows: */
//bcc.DefineZeroDirichletOnMeshBoundary(&mesh);
/* We want to specify u=0 on x=0 and y=0. To do this, we first create the boundary condition
* object saying what the value of the condition is at any particular point in space. Here
* we use the class `ConstBoundaryCondition`, a subclass of `AbstractBoundaryCondition` that
* yields the same constant value (0.0 here) everywhere it is used.
*
* Note that the object is allocated with `new`. The `BoundaryConditionsContainer` object deals
* with deleting its associated boundary condition objects. Note too that we could allocate a
* separate condition object for each boundary node, but using the same object where possible is
* more memory efficient.
*/
ConstBoundaryCondition<2>* p_zero_boundary_condition = new ConstBoundaryCondition<2>(0.0);
/* We then get a boundary node iterator from the mesh... */
TetrahedralMesh<2,2>::BoundaryNodeIterator iter = mesh.GetBoundaryNodeIteratorBegin();
/* ...and loop over the boundary nodes, getting the x and y values. */
while (iter < mesh.GetBoundaryNodeIteratorEnd())
{
double x = (*iter)->GetPoint()[0];
double y = (*iter)->GetPoint()[1];
/* If x=0 or y=0... */
if ((x==0) || (y==0))
{
/* ...associate the zero boundary condition created above with this boundary node
* ({{{*iter}}} being a pointer to a {{{Node<2>}}}).
*/
bcc.AddDirichletBoundaryCondition(*iter, p_zero_boundary_condition);
}
iter++;
}
/* Now we create Neumann boundary conditions for the ''surface elements'' on x=1 and y=1. Note that
* Dirichlet boundary conditions are defined on nodes, whereas Neumann boundary conditions are
* defined on surface elements. Note also that the natural boundary condition statement for this
* PDE is (D grad u).n = g(x) (where n is the outward-facing surface normal), and g(x) is a prescribed
* function, ''not'' something like du/dn=g(x). Hence the boundary condition we are specifying is
* (D grad u).n = 0.
*
* '''Important note for 1D:''' This means that if we were solving 2u,,xx,,=f(x) in 1D, and
* wanted to specify du/dx=1 on the LHS boundary, the Neumann boundary value we have to specify is
* -2, as n=-1 (outward facing normal) so (D gradu).n = -2 when du/dx=1.
*
* To define Neumann bcs, we reuse the zero boundary condition object defined above, but apply it
* at surface elements. We loop over these using another iterator provided by the mesh class.
*/
TetrahedralMesh<2,2>::BoundaryElementIterator surf_iter
= mesh.GetBoundaryElementIteratorBegin();
while (surf_iter != mesh.GetBoundaryElementIteratorEnd())
{
/* Get the x and y values of any node (here, the 0th) in the element. */
unsigned node_index = (*surf_iter)->GetNodeGlobalIndex(0);
double x = mesh.GetNode(node_index)->GetPoint()[0];
double y = mesh.GetNode(node_index)->GetPoint()[1];
/* If x=1 or y=1... */
if ( (fabs(x-1.0) < 1e-6) || (fabs(y-1.0) < 1e-6) )
{
/* ...associate the boundary condition with the surface element. */
bcc.AddNeumannBoundaryCondition(*surf_iter, p_zero_boundary_condition);
}
/* Finally increment the iterator. */
surf_iter++;
}
/* Next we define the solver of the PDE.
* To solve an {{{AbstractLinearEllipticPde}}} (which is the type of PDE {{{MyPde}}} is),
* we use a {{{SimpleLinearEllipticSolver}}}. The solver, again templated over
* {{{ELEMENT_DIM}}} and {{{SPACE_DIM}}}, needs to be given (pointers to) the mesh,
* pde and boundary conditions.
*/
SimpleLinearEllipticSolver<2,2> solver(&mesh, &pde, &bcc);
/* To solve, just call {{{Solve()}}}. A PETSc vector is returned. */
Vec result = solver.Solve();
/* It is a pain to access the individual components of a PETSc vector, even when running only on
* one process. A helper class called {{{ReplicatableVector}}} has been created. Create
* an instance of one of these, using the PETSc {{{Vec}}} as the data. The ''i''th
* component of {{{result}}} can now be obtained by simply doing {{{result_repl[i]}}}.
*/
ReplicatableVector result_repl(result);
/* Let us write out the solution to a file. To do this, create an
* {{{OutputFileHandler}}}, passing in the directory we want files written to.
* This is relative to the directory defined by the CHASTE_TEST_OUTPUT environment
* variable - usually `/tmp/$USER/testoutput`. Note by default the output directory
* passed in is emptied by this command. To avoid this, {{{false}}} can be passed in as a second
* parameter.
*/
OutputFileHandler output_file_handler("TestSolvingLinearPdeTutorial");
/* Create an {{{out_stream}}}, which is a stream to a particular file. An {{{out_stream}}}
* is a smart pointer to a `std::ofstream`. */
out_stream p_file = output_file_handler.OpenOutputFile("linear_solution.txt");
/* Loop over the entries of the solution. */
for (unsigned i=0; i<result_repl.GetSize(); i++)
{
/* Get the x and y-values of the node corresponding to this entry. The method
* {{{GetNode}}} on the mesh class returns a pointer to a {{{Node}}}. */
double x = mesh.GetNode(i)->rGetLocation()[0];
double y = mesh.GetNode(i)->rGetLocation()[1];
/* Get the computed solution at this node from the {{{ReplicatableVector}}}. */
double u = result_repl[i];
/* Finally, write x, y and u to the output file. The solution could then be
* visualised in (eg) matlab, using the commands:
* {{{sol=load('linear_solution.txt'); plot3(sol(:,1),sol(:,2),sol(:,3),'.');}}}*/
(*p_file) << x << " " << y << " " << u << "\n";
}
/* All PETSc {{{Vec}}}s should be destroyed when they are no longer needed, or you will have a memory leak. */
PetscTools::Destroy(result);
}
// test 2D problem - takes a long time to run.
// solution is incorrect to specified tolerance.
void xTestSimpleLinearParabolicSolver2DNeumannWithSmallTimeStepAndFineMesh()
{
// Create mesh from mesh reader
FemlabMeshReader<2,2> mesh_reader("mesh/test/data/",
"femlab_fine_square_nodes.dat",
"femlab_fine_square_elements.dat",
"femlab_fine_square_edges.dat");
TetrahedralMesh<2,2> mesh;
mesh.ConstructFromMeshReader(mesh_reader);
// Instantiate PDE object
HeatEquation<2> pde;
// Boundary conditions - zero dirichlet on boundary;
BoundaryConditionsContainer<2,2,1> bcc;
TetrahedralMesh<2,2>::BoundaryNodeIterator iter = mesh.GetBoundaryNodeIteratorBegin();
while (iter != mesh.GetBoundaryNodeIteratorEnd())
{
double x = (*iter)->GetPoint()[0];
double y = (*iter)->GetPoint()[1];
ConstBoundaryCondition<2>* p_dirichlet_boundary_condition =
new ConstBoundaryCondition<2>(x);
if (fabs(y) < 0.01)
{
bcc.AddDirichletBoundaryCondition(*iter, p_dirichlet_boundary_condition);
}
if (fabs(y - 1.0) < 0.01)
{
bcc.AddDirichletBoundaryCondition(*iter, p_dirichlet_boundary_condition);
}
if (fabs(x) < 0.01)
{
bcc.AddDirichletBoundaryCondition(*iter, p_dirichlet_boundary_condition);
}
iter++;
}
TetrahedralMesh<2,2>::BoundaryElementIterator surf_iter = mesh.GetBoundaryElementIteratorBegin();
ConstBoundaryCondition<2>* p_neumann_boundary_condition =
new ConstBoundaryCondition<2>(1.0);
while (surf_iter != mesh.GetBoundaryElementIteratorEnd())
{
int node = (*surf_iter)->GetNodeGlobalIndex(0);
double x = mesh.GetNode(node)->GetPoint()[0];
if (fabs(x - 1.0) < 0.01)
{
bcc.AddNeumannBoundaryCondition(*surf_iter, p_neumann_boundary_condition);
}
surf_iter++;
}
// Solver
SimpleLinearParabolicSolver<2,2> solver(&mesh,&pde,&bcc);
// Initial condition u(0,x,y) = sin(0.5*M_PI*x)*sin(M_PI*y)+x
std::vector<double> init_cond(mesh.GetNumNodes());
for (unsigned i=0; i<mesh.GetNumNodes(); i++)
{
double x = mesh.GetNode(i)->GetPoint()[0];
double y = mesh.GetNode(i)->GetPoint()[1];
init_cond[i] = sin(0.5*M_PI*x)*sin(M_PI*y)+x;
}
Vec initial_condition = PetscTools::CreateVec(init_cond);
double t_end = 0.1;
solver.SetTimes(0, t_end);
solver.SetTimeStep(0.001);
solver.SetInitialCondition(initial_condition);
Vec result = solver.Solve();
ReplicatableVector result_repl(result);
// Check solution is u = e^{-5/4*M_PI*M_PI*t} sin(0.5*M_PI*x)*sin(M_PI*y)+x, t=0.1
for (unsigned i=0; i<result_repl.GetSize(); i++)
{
double x = mesh.GetNode(i)->GetPoint()[0];
double y = mesh.GetNode(i)->GetPoint()[1];
double u = exp((-5/4)*M_PI*M_PI*t_end) * sin(0.5*M_PI*x) * sin(M_PI*y) + x;
TS_ASSERT_DELTA(result_repl[i], u, 0.001);
}
PetscTools::Destroy(result);
PetscTools::Destroy(initial_condition);
}
/**
* Simple Parabolic PDE u' = del squared u
*
* With u = x on 5 boundaries of the unit cube, and
* u_n = 1 on the x face of the cube.
*
* Subject to the initial condition
* u(0,x,y,z)=sin( PI x)sin( PI y)sin( PI z) + x
*/
void TestSimpleLinearParabolicSolver3DNeumannOnCoarseMesh()
{
// Create mesh from mesh reader
TrianglesMeshReader<3,3> mesh_reader("mesh/test/data/cube_136_elements");
TetrahedralMesh<3,3> mesh;
mesh.ConstructFromMeshReader(mesh_reader);
// Instantiate PDE object
HeatEquation<3> pde;
// Boundary conditions
BoundaryConditionsContainer<3,3,1> bcc;
TetrahedralMesh<3,3>::BoundaryNodeIterator iter = mesh.GetBoundaryNodeIteratorBegin();
while (iter != mesh.GetBoundaryNodeIteratorEnd())
{
double x = (*iter)->GetPoint()[0];
double y = (*iter)->GetPoint()[1];
double z = (*iter)->GetPoint()[2];
if ((fabs(y) < 0.01) || (fabs(y - 1.0) < 0.01) ||
(fabs(x) < 0.01) ||
(fabs(z) < 0.01) || (fabs(z - 1.0) < 0.01) )
{
ConstBoundaryCondition<3>* p_dirichlet_boundary_condition =
new ConstBoundaryCondition<3>(x);
bcc.AddDirichletBoundaryCondition(*iter, p_dirichlet_boundary_condition);
}
iter++;
}
TetrahedralMesh<3,3>::BoundaryElementIterator surf_iter = mesh.GetBoundaryElementIteratorBegin();
ConstBoundaryCondition<3>* p_neumann_boundary_condition =
new ConstBoundaryCondition<3>(1.0);
while (surf_iter != mesh.GetBoundaryElementIteratorEnd())
{
int node = (*surf_iter)->GetNodeGlobalIndex(0);
double x = mesh.GetNode(node)->GetPoint()[0];
if (fabs(x - 1.0) < 0.01)
{
bcc.AddNeumannBoundaryCondition(*surf_iter, p_neumann_boundary_condition);
}
surf_iter++;
}
// Solver
SimpleLinearParabolicSolver<3,3> solver(&mesh,&pde,&bcc);
// Initial condition u(0,x,y) = sin(0.5*PI*x)*sin(PI*y)+x
Vec initial_condition = PetscTools::CreateVec(mesh.GetNumNodes());
double* p_initial_condition;
VecGetArray(initial_condition, &p_initial_condition);
int lo, hi;
VecGetOwnershipRange(initial_condition, &lo, &hi);
for (int global_index = lo; global_index < hi; global_index++)
{
int local_index = global_index - lo;
double x = mesh.GetNode(global_index)->GetPoint()[0];
double y = mesh.GetNode(global_index)->GetPoint()[1];
double z = mesh.GetNode(global_index)->GetPoint()[2];
p_initial_condition[local_index] = sin(0.5*M_PI*x)*sin(M_PI*y)*sin(M_PI*z)+x;
}
VecRestoreArray(initial_condition, &p_initial_condition);
solver.SetTimes(0, 0.1);
solver.SetTimeStep(0.01);
solver.SetInitialCondition(initial_condition);
Vec result = solver.Solve();
// Check result
double* p_result;
VecGetArray(result, &p_result);
// Solution should be u = e^{-5/2*PI*PI*t} sin(0.5*PI*x)*sin(PI*y)*sin(PI*z)+x, t=0.1
for (int global_index = lo; global_index < hi; global_index++)
{
int local_index = global_index - lo;
double x = mesh.GetNode(global_index)->GetPoint()[0];
double y = mesh.GetNode(global_index)->GetPoint()[1];
double z = mesh.GetNode(global_index)->GetPoint()[2];
double u = exp((-5/2)*M_PI*M_PI*0.1) * sin(0.5*M_PI*x) * sin(M_PI*y)* sin(M_PI*z) + x;
TS_ASSERT_DELTA(p_result[local_index], u, u*0.15);
}
VecRestoreArray(result, &p_result);
PetscTools::Destroy(initial_condition);
PetscTools::Destroy(result);
}
/**
* Simple Parabolic PDE u' = del squared u + 1
*
* With u = -(1/6)(x^2+y^2+z^2) on the boundaries of the unit cube.
*
* Subject to the initial condition
* u(0,x,y,z)=sin( PI x)sin( PI y)sin( PI z) - (1/6)(x^2+y^2+z^2)
*
*/
void TestSimpleLinearParabolicSolver3DZeroDirichWithSourceTerm()
{
// Create mesh from mesh reader
TrianglesMeshReader<3,3> mesh_reader("mesh/test/data/cube_136_elements");
TetrahedralMesh<3,3> mesh;
mesh.ConstructFromMeshReader(mesh_reader);
// Instantiate PDE object
HeatEquationWithSourceTerm<3> pde;
// Boundary conditions
BoundaryConditionsContainer<3,3,1> bcc;
TetrahedralMesh<3,3>::BoundaryNodeIterator iter = mesh.GetBoundaryNodeIteratorBegin();
while (iter < mesh.GetBoundaryNodeIteratorEnd())
{
double x = (*iter)->GetPoint()[0];
double y = (*iter)->GetPoint()[1];
double z = (*iter)->GetPoint()[2];
ConstBoundaryCondition<3>* p_dirichlet_boundary_condition =
new ConstBoundaryCondition<3>(-1.0/6*(x*x+y*y+z*z));
bcc.AddDirichletBoundaryCondition(*iter, p_dirichlet_boundary_condition);
iter++;
}
// Solver
SimpleLinearParabolicSolver<3,3> solver(&mesh,&pde,&bcc);
// Initial condition u(0,x) = sin(x*pi)*sin(y*pi)*sin(z*pi)-1/6*(x^2+y^2+z^2)
Vec initial_condition = PetscTools::CreateVec(mesh.GetNumNodes());
double* p_initial_condition;
VecGetArray(initial_condition, &p_initial_condition);
int lo, hi;
VecGetOwnershipRange(initial_condition, &lo, &hi);
for (int global_index = lo; global_index < hi; global_index++)
{
int local_index = global_index - lo;
double x = mesh.GetNode(global_index)->GetPoint()[0];
double y = mesh.GetNode(global_index)->GetPoint()[1];
double z = mesh.GetNode(global_index)->GetPoint()[2];
p_initial_condition[local_index] = sin(x*M_PI)*sin(y*M_PI)*sin(z*M_PI)-1.0/6*(x*x+y*y+z*z);
}
VecRestoreArray(initial_condition, &p_initial_condition);
double t_end = 0.1;
solver.SetTimes(0, t_end);
solver.SetTimeStep(0.01);
solver.SetInitialCondition(initial_condition);
Vec result = solver.Solve();
// Check result
double* p_result;
VecGetArray(result, &p_result);
// Solution should be u = e^{-t*2*pi*pi} sin(x*pi) sin(y*pi) sin(z*pi) - 1/6(x^2+y^2+z^2), t=0.1
for (int global_index = lo; global_index < hi; global_index++)
{
int local_index = global_index - lo;
double x = mesh.GetNode(global_index)->GetPoint()[0];
double y = mesh.GetNode(global_index)->GetPoint()[1];
double z = mesh.GetNode(global_index)->GetPoint()[2];
double u = exp(-t_end*3*M_PI*M_PI)*sin(x*M_PI)*sin(y*M_PI)*sin(z*M_PI)-1.0/6*(x*x+y*y+z*z);
TS_ASSERT_DELTA(p_result[local_index], u, 0.1);
}
VecRestoreArray(result, &p_result);
PetscTools::Destroy(initial_condition);
PetscTools::Destroy(result);
}