//Encrypted settings for M7
//ES when M7 is from an enrollee
void CTlvEsM7Enr::parse(BufferObj &theBuf, BufferObj &authKey, bool allocate)
{
nonce = CTlvNonce(WSC_ID_E_SNONCE2, theBuf, SIZE_128_BITS);
if(WSC_ID_IDENTITY_PROOF == theBuf.NextType())
idProof = CTlvIdentityProof(WSC_ID_IDENTITY_PROOF, theBuf, 0, allocate);
// Skip attributes until the KeyWrapAuthenticator
while(WSC_ID_KEY_WRAP_AUTH != theBuf.NextType())
{
//advance past the TLV
uint8 *Pos = theBuf.Advance( sizeof(S_WSC_TLV_HEADER) +
WscNtohs(*(uint16 *)(theBuf.Pos()+sizeof(uint16))) );
//If Advance returned NULL, it means there's no more data in the
//buffer. This is an error.
if(Pos == NULL)
throw RPROT_ERR_REQD_TLV_MISSING;
}
uint8 * startOfAuthenticator = theBuf.Pos();
keyWrapAuth = CTlvAuthenticator(WSC_ID_KEY_WRAP_AUTH, theBuf, SIZE_64_BITS);
//validate the mac
uint8 dataMac[BUF_SIZE_256_BITS];
//calculate the hmac of the data (data only, not the last auth TLV)
if(HMAC(EVP_sha256(), authKey.GetBuf(), SIZE_256_BITS, theBuf.GetBuf(),
startOfAuthenticator - theBuf.GetBuf(),
dataMac, NULL) == NULL)
{
TUTRACE((TUTRACE_ERR, "RPROTO: HMAC failed\n"));
throw RPROT_ERR_CRYPTO;
}
//compare it against the received hmac
if(memcmp(dataMac, keyWrapAuth.Value(), SIZE_64_BITS) != 0)
{
TUTRACE((TUTRACE_ERR, "RPROTO: HMAC results don't match\n"));
throw RPROT_ERR_INVALID_VALUE;
}
}
void CTlvEsM8Sta::parse(BufferObj &theBuf, BufferObj &authKey, bool allocate, bool isWirelessWPS)
{
//There should be at least 1 credential TLV
CTlvCredential *pCredential;
if (isWirelessWPS) { // Credential(s) are processed only when doing wireless WPS
pCredential = new CTlvCredential();
pCredential->parse(theBuf, allocate);
ListAddItem(credential, pCredential);
//now parse any additional credential TLVs
while(WSC_ID_CREDENTIAL == theBuf.NextType())
{
pCredential = new CTlvCredential();
pCredential->parse(theBuf, allocate);
ListAddItem(credential, pCredential);
}
}
// Note that all Credentials are ignored if not doing wireless WPS. Also, if a Credential
// is present in this case, then the new password attribute will be ignored as well, because
// the Credential attribute will be next to be parsed in the message, which will cause the code
// to drop down to just skipping all attributes until the key wrap authenticator.
if(WSC_ID_NEW_PWD == theBuf.NextType())
{
//If the New Password TLV is included, the Device password ID is required
new_pwd = CTlvNewPwd(WSC_ID_NEW_PWD, theBuf, SIZE_64_BYTES, allocate);
pwdId = CTlvDevicePwdId(WSC_ID_DEVICE_PWD_ID, theBuf);
}
// Skip attributes until the KeyWrapAuthenticator
while(WSC_ID_KEY_WRAP_AUTH != theBuf.NextType())
{
//advance past the TLV
uint8 *Pos = theBuf.Advance( sizeof(S_WSC_TLV_HEADER) +
WscNtohs(*(uint16 *)(theBuf.Pos()+sizeof(uint16))) );
//If Advance returned NULL, it means there's no more data in the
//buffer. This is an error.
if(Pos == NULL)
throw RPROT_ERR_REQD_TLV_MISSING;
}
uint8 * startOfAuthenticator = theBuf.Pos();
keyWrapAuth = CTlvAuthenticator(WSC_ID_KEY_WRAP_AUTH, theBuf, SIZE_64_BITS);
//validate the mac
uint8 dataMac[BUF_SIZE_256_BITS];
//calculate the hmac of the data (data only, not the last auth TLV)
if(HMAC(EVP_sha256(), authKey.GetBuf(), SIZE_256_BITS, theBuf.GetBuf(),
startOfAuthenticator - theBuf.GetBuf(),
dataMac, NULL) == NULL)
{
TUTRACE((TUTRACE_ERR, "RPROTO: HMAC failed\n"));
throw RPROT_ERR_CRYPTO;
}
//compare it against the received hmac
if(memcmp(dataMac, keyWrapAuth.Value(), SIZE_64_BITS) != 0)
{
TUTRACE((TUTRACE_ERR, "RPROTO: HMAC results don't match\n"));
throw RPROT_ERR_INVALID_VALUE;
}
}
void CTlvEsM8Ap::parse(BufferObj &theBuf, BufferObj &authKey, bool allocate)
{
CTlvNwKeyIndex *keyIndex;
CTlvNwKey *key;
//NW Index is optional
if(WSC_ID_NW_INDEX == theBuf.NextType())
nwIndex = CTlvNwIndex(WSC_ID_NW_INDEX, theBuf);
ssid = CTlvSsid(WSC_ID_SSID, theBuf, SIZE_32_BYTES, allocate);
authType = CTlvAuthType(WSC_ID_AUTH_TYPE, theBuf);
encrType = CTlvEncrType(WSC_ID_ENCR_TYPE, theBuf);
//The next field is network key index. There are two possibilities:
//1. The TLV is omitted, in which case, there is only 1 network key
//2. The TLV is present, in which case, there may be 1 or more network keys
//condition 1. If the next field is a network Key, the index TLV was omitted
if(WSC_ID_NW_KEY == theBuf.NextType())
{
key = new CTlvNwKey(WSC_ID_NW_KEY, theBuf, SIZE_64_BYTES, allocate);
if(!key)
throw WSC_ERR_OUTOFMEMORY;
ListAddItem(nwKey, key);
}
else
{
//condition 2. any other possibities are illegal & will be caught later
while(WSC_ID_NW_KEY_INDEX == theBuf.NextType())
{
keyIndex = new CTlvNwKeyIndex(WSC_ID_NW_KEY_INDEX, theBuf);
if(!keyIndex)
throw WSC_ERR_OUTOFMEMORY;
ListAddItem(nwKeyIndex, keyIndex);
key = new CTlvNwKey(WSC_ID_NW_KEY, theBuf, SIZE_64_BYTES, allocate);
if(!key)
throw WSC_ERR_OUTOFMEMORY;
ListAddItem(nwKey, key);
}//while
}//else
macAddr = CTlvMacAddr(WSC_ID_MAC_ADDR, theBuf, SIZE_6_BYTES, allocate);
if(WSC_ID_NEW_PWD == theBuf.NextType())
{
//If the New Password TLV is included, the Device password ID is required
new_pwd = CTlvNewPwd(WSC_ID_NEW_PWD, theBuf, SIZE_64_BYTES, allocate);
pwdId = CTlvDevicePwdId(WSC_ID_DEVICE_PWD_ID, theBuf);
}
//skip Permitted Config Methods field.
if(WSC_ID_PERM_CFG_METHODS == theBuf.NextType())
{
//advance past the TLV
theBuf.Advance( sizeof(S_WSC_TLV_HEADER) +
WscNtohs(*(uint16 *)(theBuf.Pos()+sizeof(uint16))) );
}
// Skip attributes until the KeyWrapAuthenticator
while(WSC_ID_KEY_WRAP_AUTH != theBuf.NextType())
{
//advance past the TLV
uint8 *Pos = theBuf.Advance( sizeof(S_WSC_TLV_HEADER) +
WscNtohs(*(uint16 *)(theBuf.Pos()+sizeof(uint16))) );
//If Advance returned NULL, it means there's no more data in the
//buffer. This is an error.
if(Pos == NULL)
throw RPROT_ERR_REQD_TLV_MISSING;
}
uint8 * startOfAuthenticator = theBuf.Pos();
keyWrapAuth = CTlvAuthenticator(WSC_ID_KEY_WRAP_AUTH, theBuf, SIZE_64_BITS);
//validate the mac
uint8 dataMac[BUF_SIZE_256_BITS];
//calculate the hmac of the data (data only, not the last auth TLV)
if(HMAC(EVP_sha256(), authKey.GetBuf(), SIZE_256_BITS, theBuf.GetBuf(),
startOfAuthenticator - theBuf.GetBuf(),
dataMac, NULL) == NULL)
{
TUTRACE((TUTRACE_ERR, "RPROTO: HMAC failed\n"));
throw RPROT_ERR_CRYPTO;
}
//compare it against the received hmac
if(memcmp(dataMac, keyWrapAuth.Value(), SIZE_64_BITS) != 0)
{
TUTRACE((TUTRACE_ERR, "RPROTO: HMAC results don't match\n"));
throw RPROT_ERR_INVALID_VALUE;
}
}