/**
@see DVBT_NIM_FP_SET_PARAMETERS
*/
s32
dvbt_nim_default_SetParameters(
DVBT_NIM_MODULE *pNim,
u64 RfFreqHz,
s32 BandwidthMode
)
{
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Set tuner RF frequency in Hz.
if(pTuner->SetRfFreqHz(pTuner, RfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod bandwidth mode.
if(pDemod->SetBandwidthMode(pDemod, BandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod particular registers.
if(pDemod->ResetFunction(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
return FUNCTION_SUCCESS;
error_status_execute_function:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_SET_PARAMETERS
*/
int
rtl2832_fc2580_SetParameters(
DVBT_NIM_MODULE *pNim,
unsigned long RfFreqHz,
int BandwidthMode
)
{
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
FC2580_EXTRA_MODULE *pTunerExtra;
int TunerBandwidthMode;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Get tuner extra module.
pTunerExtra = (FC2580_EXTRA_MODULE *)pTuner->pExtra;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Set tuner RF frequency in Hz.
if(pTuner->SetRfFreqHz(pTuner, RfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Determine TunerBandwidthMode according to bandwidth mode.
switch(BandwidthMode)
{
default:
case DVBT_BANDWIDTH_6MHZ: TunerBandwidthMode = FC2580_BANDWIDTH_6000000HZ; break;
case DVBT_BANDWIDTH_7MHZ: TunerBandwidthMode = FC2580_BANDWIDTH_7000000HZ; break;
case DVBT_BANDWIDTH_8MHZ: TunerBandwidthMode = FC2580_BANDWIDTH_8000000HZ; break;
}
// Set tuner bandwidth mode with TunerBandwidthMode.
if(pTunerExtra->SetBandwidthMode(pTuner, TunerBandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Set demod bandwidth mode.
if(pDemod->SetBandwidthMode(pDemod, BandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod particular registers.
if(pDemod->ResetFunction(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_SET_PARAMETERS
*/
s32
rtl2832_tda18272_SetParameters(
DVBT_NIM_MODULE *pNim,
u64 RfFreqHz,
s32 BandwidthMode
)
{
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
TDA18272_EXTRA_MODULE *pTunerExtra;
s32 TunerStandardBandwidthMode;
u64 IfFreqHz;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Get tuner extra module.
pTunerExtra = &(pTuner->Extra.Tda18272);
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Determine TunerBandwidthMode according to bandwidth mode.
switch(BandwidthMode)
{
default:
case DVBT_BANDWIDTH_6MHZ: TunerStandardBandwidthMode = TDA18272_STANDARD_BANDWIDTH_DVBT_6MHZ; break;
case DVBT_BANDWIDTH_7MHZ: TunerStandardBandwidthMode = TDA18272_STANDARD_BANDWIDTH_DVBT_7MHZ; break;
case DVBT_BANDWIDTH_8MHZ: TunerStandardBandwidthMode = TDA18272_STANDARD_BANDWIDTH_DVBT_8MHZ; break;
}
// Set tuner standard and bandwidth mode with TunerStandardBandwidthMode.
if(pTunerExtra->SetStandardBandwidthMode(pTuner, TunerStandardBandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set tuner RF frequency in Hz.
// Note: Must run SetRfFreqHz() after SetStandardBandwidthMode(), because SetRfFreqHz() needs some
// SetStandardBandwidthMode() information.
if(pTuner->SetRfFreqHz(pTuner, RfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Get tuner IF frequency in Hz.
// Note: 1. Must run GetIfFreqHz() after SetRfFreqHz(), because GetIfFreqHz() needs some SetRfFreqHz() information.
// 2. TDA18272 tuner uses dynamic IF frequency.
if(pTunerExtra->GetIfFreqHz(pTuner, &IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Set demod IF frequency according to IfFreqHz.
// Note: TDA18272 tuner uses dynamic IF frequency.
if(pDemod->SetIfFreqHz(pDemod, IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod bandwidth mode.
if(pDemod->SetBandwidthMode(pDemod, BandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod particular registers.
if(pDemod->ResetFunction(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}
/**
@see DVBT_NIM_FP_SET_PARAMETERS
*/
int
rtl2832_mt2266_SetParameters(
DVBT_NIM_MODULE *pNim,
unsigned long RfFreqHz,
int BandwidthMode
)
{
TUNER_MODULE *pTuner;
DVBT_DEMOD_MODULE *pDemod;
MT2266_EXTRA_MODULE *pMt2266Extra;
Handle_t Mt2266Handle;
unsigned long BandwidthHz;
RTL2832_MT2266_EXTRA_MODULE *pRtl2832Mt2266Extra;
UData_t Status;
// Get tuner module and demod module.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
// Get tuner extra module.
pMt2266Extra = (MT2266_EXTRA_MODULE *)pTuner->pExtra;
// Get tuner handle.
Mt2266Handle = pMt2266Extra->DeviceHandle;
// Get NIM extra module.
pRtl2832Mt2266Extra = (RTL2832_MT2266_EXTRA_MODULE *)pNim->pExtra;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Set tuner RF frequency in Hz.
if(pTuner->SetRfFreqHz(pTuner, RfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Determine BandwidthHz according to bandwidth mode.
switch(BandwidthMode)
{
default:
case DVBT_BANDWIDTH_6MHZ: BandwidthHz = MT2266_BANDWIDTH_6MHZ; break;
case DVBT_BANDWIDTH_7MHZ: BandwidthHz = MT2266_BANDWIDTH_7MHZ; break;
case DVBT_BANDWIDTH_8MHZ: BandwidthHz = MT2266_BANDWIDTH_8MHZ; break;
}
// Set tuner bandwidth in Hz with BandwidthHz.
if(pMt2266Extra->SetBandwidthHz(pTuner, BandwidthHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Set demod bandwidth mode.
if(pDemod->SetBandwidthMode(pDemod, BandwidthMode) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod particular registers.
if(pDemod->ResetFunction(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Reset demod by software reset.
if(pDemod->SoftwareReset(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Enable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Reset MT2266 update procedure.
Status = demod_pdcontrol_reset(pDemod, Mt2266Handle, &pRtl2832Mt2266Extra->AgcCurrentState);
if(MT_IS_ERROR(Status))
goto error_status_execute_function;
// Disable demod DVBT_IIC_REPEAT.
if(pDemod->SetRegBitsWithPage(pDemod, DVBT_IIC_REPEAT, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
return FUNCTION_SUCCESS;
error_status_execute_function:
error_status_set_registers:
return FUNCTION_ERROR;
}