void LoaderFbxMesh::parseVertexColors(FbxMesh* mesh, int controlPointIndex, int vertexId)
{
for(int i=0; i<mesh->GetElementVertexColorCount(); i++)
{
FbxGeometryElementVertexColor* vertexColorElement = mesh->GetElementVertexColor(i);
FbxColor fbxColor;
switch(vertexColorElement->GetMappingMode())
{
case FbxGeometryElement::eByControlPoint:
fbxColor = parseVertexColorsByControlPoint(vertexColorElement, controlPointIndex);
break;
case FbxGeometryElement::eByPolygonVertex:
fbxColor = parseVertexColorsByPolygonVertex(vertexColorElement, vertexId);
break;
default:
break;
}
Float4 color;
color.x = static_cast<float>(fbxColor.mRed);
color.y = static_cast<float>(fbxColor.mGreen);
color.z = static_cast<float>(fbxColor.mBlue);
color.w = static_cast<float>(fbxColor.mAlpha);
vertexColors_.push_back(color);
}
}
void FbxParser::ReadColor(FbxMesh* pMesh, int ctrlPointIndex,int vertexCounter , GS::float4& color)
{
if (pMesh->GetElementVertexColorCount() < 1)
return ;
FbxGeometryElementVertexColor* leVtxc = pMesh->GetElementVertexColor( 0);
FbxColor fbxColor;
switch (leVtxc->GetMappingMode())
{
default:
break;
case FbxGeometryElement::eByControlPoint:
switch (leVtxc->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
fbxColor = leVtxc->GetDirectArray().GetAt(ctrlPointIndex);
color= GS::float4(fbxColor.mRed, fbxColor.mGreen, fbxColor.mBlue, fbxColor.mAlpha);
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = leVtxc->GetIndexArray().GetAt(ctrlPointIndex);
fbxColor = leVtxc->GetDirectArray().GetAt(id);
color= GS::float4(fbxColor.mRed, fbxColor.mGreen, fbxColor.mBlue, fbxColor.mAlpha);
}
break;
default:
break; // other reference modes not shown here!
}
break;
case FbxGeometryElement::eByPolygonVertex:
{
switch (leVtxc->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
fbxColor = leVtxc->GetDirectArray().GetAt(vertexCounter);
color= GS::float4(fbxColor.mRed, fbxColor.mGreen, fbxColor.mBlue, fbxColor.mAlpha);
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = leVtxc->GetIndexArray().GetAt(vertexCounter);
fbxColor = leVtxc->GetDirectArray().GetAt(id);
color= GS::float4(fbxColor.mRed, fbxColor.mGreen, fbxColor.mBlue, fbxColor.mAlpha);
}
break;
default:
break; // other reference modes not shown here!
}
}
break;
case FbxGeometryElement::eByPolygon: // doesn't make much sense for UVs
case FbxGeometryElement::eAllSame: // doesn't make much sense for UVs
case FbxGeometryElement::eNone: // doesn't make much sense for UVs
break;
}
}
//converts a FBX mesh to a CC mesh
static ccMesh* FromFbxMesh(FbxMesh* fbxMesh, bool alwaysDisplayLoadDialog/*=true*/, bool* coordinatesShiftEnabled/*=0*/, CCVector3d* coordinatesShift/*=0*/)
{
if (!fbxMesh)
return 0;
int polyCount = fbxMesh->GetPolygonCount();
//fbxMesh->GetLayer(
unsigned triCount = 0;
unsigned polyVertCount = 0; //different from vertCount (vertices can be counted multiple times here!)
//as we can't load all polygons (yet ;) we already look if we can load any!
{
unsigned skipped = 0;
for (int i=0; i<polyCount; ++i)
{
int pSize = fbxMesh->GetPolygonSize(i);
if (pSize == 3)
{
++triCount;
polyVertCount += 3;
}
else if (pSize == 4)
{
triCount += 2;
polyVertCount += 4;
}
else
{
++skipped;
}
}
if (triCount == 0)
{
ccLog::Warning(QString("[FBX] No triangle or quad found in mesh '%1'! (polygons with more than 4 vertices are not supported for the moment)").arg(fbxMesh->GetName()));
return 0;
}
else if (skipped != 0)
{
ccLog::Warning(QString("[FBX] Some polygons in mesh '%1' were ignored (%2): polygons with more than 4 vertices are not supported for the moment)").arg(fbxMesh->GetName()).arg(skipped));
return 0;
}
}
int vertCount = fbxMesh->GetControlPointsCount();
if (vertCount <= 0)
{
ccLog::Warning(QString("[FBX] Mesh '%1' has no vetex or no polygon?!").arg(fbxMesh->GetName()));
return 0;
}
ccPointCloud* vertices = new ccPointCloud("vertices");
ccMesh* mesh = new ccMesh(vertices);
mesh->setName(fbxMesh->GetName());
mesh->addChild(vertices);
vertices->setEnabled(false);
if (!mesh->reserve(static_cast<unsigned>(triCount)) || !vertices->reserve(vertCount))
{
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1'!").arg(fbxMesh->GetName()));
delete mesh;
return 0;
}
//colors
{
for (int l=0; l<fbxMesh->GetElementVertexColorCount(); l++)
{
FbxGeometryElementVertexColor* vertColor = fbxMesh->GetElementVertexColor(l);
//CC can only handle per-vertex colors
if (vertColor->GetMappingMode() == FbxGeometryElement::eByControlPoint)
{
if (vertColor->GetReferenceMode() == FbxGeometryElement::eDirect
|| vertColor->GetReferenceMode() == FbxGeometryElement::eIndexToDirect)
{
if (vertices->reserveTheRGBTable())
{
switch (vertColor->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
{
for (int i=0; i<vertCount; ++i)
{
FbxColor c = vertColor->GetDirectArray().GetAt(i);
vertices->addRGBColor( static_cast<colorType>(c.mRed * MAX_COLOR_COMP),
static_cast<colorType>(c.mGreen * MAX_COLOR_COMP),
static_cast<colorType>(c.mBlue * MAX_COLOR_COMP) );
}
}
break;
case FbxGeometryElement::eIndexToDirect:
{
for (int i=0; i<vertCount; ++i)
{
int id = vertColor->GetIndexArray().GetAt(i);
FbxColor c = vertColor->GetDirectArray().GetAt(id);
vertices->addRGBColor( static_cast<colorType>(c.mRed * MAX_COLOR_COMP),
static_cast<colorType>(c.mGreen * MAX_COLOR_COMP),
static_cast<colorType>(c.mBlue * MAX_COLOR_COMP) );
}
}
break;
default:
assert(false);
break;
}
vertices->showColors(true);
mesh->showColors(true);
break; //no need to look for other color fields (we won't be able to handle them!
}
else
{
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1' colors!").arg(fbxMesh->GetName()));
}
}
else
{
ccLog::Warning(QString("[FBX] Color field #%i of mesh '%1' will be ignored (unhandled type)").arg(l).arg(fbxMesh->GetName()));
}
}
else
{
ccLog::Warning(QString("[FBX] Color field #%i of mesh '%1' will be ignored (unhandled type)").arg(l).arg(fbxMesh->GetName()));
}
}
}
//normals can be per vertices or per-triangle
int perPointNormals = -1;
int perVertexNormals = -1;
int perPolygonNormals = -1;
{
for (int j=0; j<fbxMesh->GetElementNormalCount(); j++)
{
FbxGeometryElementNormal* leNormals = fbxMesh->GetElementNormal(j);
switch(leNormals->GetMappingMode())
{
case FbxGeometryElement::eByControlPoint:
perPointNormals = j;
break;
case FbxGeometryElement::eByPolygonVertex:
perVertexNormals = j;
break;
case FbxGeometryElement::eByPolygon:
perPolygonNormals = j;
break;
default:
//not handled
break;
}
}
}
//per-point normals
if (perPointNormals >= 0)
{
FbxGeometryElementNormal* leNormals = fbxMesh->GetElementNormal(perPointNormals);
FbxLayerElement::EReferenceMode refMode = leNormals->GetReferenceMode();
const FbxLayerElementArrayTemplate<FbxVector4>& normals = leNormals->GetDirectArray();
assert(normals.GetCount() == vertCount);
if (normals.GetCount() != vertCount)
{
ccLog::Warning(QString("[FBX] Wrong number of normals on mesh '%1'!").arg(fbxMesh->GetName()));
perPointNormals = -1;
}
else if (!vertices->reserveTheNormsTable())
{
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1' normals!").arg(fbxMesh->GetName()));
perPointNormals = -1;
}
else
{
//import normals
for (int i=0; i<vertCount; ++i)
{
int id = refMode != FbxGeometryElement::eDirect ? leNormals->GetIndexArray().GetAt(i) : i;
FbxVector4 N = normals.GetAt(id);
//convert to CC-structure
CCVector3 Npc( static_cast<PointCoordinateType>(N.Buffer()[0]),
static_cast<PointCoordinateType>(N.Buffer()[1]),
static_cast<PointCoordinateType>(N.Buffer()[2]) );
vertices->addNorm(Npc.u);
}
vertices->showNormals(true);
mesh->showNormals(true);
//no need to import the other normals (if any)
perVertexNormals = -1;
perPolygonNormals = -1;
}
}
//per-triangle normals
NormsIndexesTableType* normsTable = 0;
if (perVertexNormals >= 0 || perPolygonNormals >= 0)
{
normsTable = new NormsIndexesTableType();
if (!normsTable->reserve(polyVertCount) || !mesh->reservePerTriangleNormalIndexes())
{
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1' normals!").arg(fbxMesh->GetName()));
normsTable->release();
normsTable = 0;
}
else
{
mesh->setTriNormsTable(normsTable);
mesh->addChild(normsTable);
vertices->showNormals(true);
mesh->showNormals(true);
}
}
//import textures UV
int perVertexUV = -1;
bool hasTexUV = false;
{
for (int l=0; l<fbxMesh->GetElementUVCount(); ++l)
{
FbxGeometryElementUV* leUV = fbxMesh->GetElementUV(l);
//per-point UV coordinates
if (leUV->GetMappingMode() == FbxGeometryElement::eByControlPoint)
{
TextureCoordsContainer* vertTexUVTable = new TextureCoordsContainer();
if (!vertTexUVTable->reserve(vertCount) || !mesh->reservePerTriangleTexCoordIndexes())
{
vertTexUVTable->release();
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1' UV coordinates!").arg(fbxMesh->GetName()));
}
else
{
FbxLayerElement::EReferenceMode refMode = leUV->GetReferenceMode();
for (int i=0; i<vertCount; ++i)
{
int id = refMode != FbxGeometryElement::eDirect ? leUV->GetIndexArray().GetAt(i) : i;
FbxVector2 uv = leUV->GetDirectArray().GetAt(id);
//convert to CC-structure
float uvf[2] = {static_cast<float>(uv.Buffer()[0]),
static_cast<float>(uv.Buffer()[1])};
vertTexUVTable->addElement(uvf);
}
mesh->addChild(vertTexUVTable);
hasTexUV = true;
}
perVertexUV = -1;
break; //no need to look to the other UV fields (can't handle them!)
}
else if (leUV->GetMappingMode() == FbxGeometryElement::eByPolygonVertex)
{
//per-vertex UV coordinates
perVertexUV = l;
}
}
}
//per-vertex UV coordinates
TextureCoordsContainer* texUVTable = 0;
if (perVertexUV >= 0)
{
texUVTable = new TextureCoordsContainer();
if (!texUVTable->reserve(polyVertCount) || !mesh->reservePerTriangleTexCoordIndexes())
{
texUVTable->release();
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1' UV coordinates!").arg(fbxMesh->GetName()));
}
else
{
mesh->addChild(texUVTable);
hasTexUV = true;
}
}
//import polygons
{
for (int i=0; i<polyCount; ++i)
{
int pSize = fbxMesh->GetPolygonSize(i);
if (pSize > 4)
{
//not handled for the moment
continue;
}
//we split quads into two triangles
//vertex indices
int i1 = fbxMesh->GetPolygonVertex(i, 0);
int i2 = fbxMesh->GetPolygonVertex(i, 1);
int i3 = fbxMesh->GetPolygonVertex(i, 2);
mesh->addTriangle(i1,i2,i3);
int i4 = -1;
if (pSize == 4)
{
i4 = fbxMesh->GetPolygonVertex(i, 3);
mesh->addTriangle(i1,i3,i4);
}
if (hasTexUV)
{
if (texUVTable)
{
assert(perVertexUV >= 0);
int uvIndex = static_cast<int>(texUVTable->currentSize());
for (int j=0; j<pSize; ++j)
{
int lTextureUVIndex = fbxMesh->GetTextureUVIndex(i, j);
FbxGeometryElementUV* leUV = fbxMesh->GetElementUV(perVertexUV);
FbxVector2 uv = leUV->GetDirectArray().GetAt(lTextureUVIndex);
//convert to CC-structure
float uvf[2] = {static_cast<float>(uv.Buffer()[0]),
static_cast<float>(uv.Buffer()[1])};
texUVTable->addElement(uvf);
}
mesh->addTriangleTexCoordIndexes(uvIndex,uvIndex+1,uvIndex+2);
if (pSize == 4)
mesh->addTriangleTexCoordIndexes(uvIndex,uvIndex+2,uvIndex+3);
}
else
{
mesh->addTriangleTexCoordIndexes(i1,i2,i3);
if (pSize == 4)
mesh->addTriangleTexCoordIndexes(i1,i3,i4);
}
}
//per-triangle normals
if (normsTable)
{
int nIndex = static_cast<int>(normsTable->currentSize());
for (int j=0; j<pSize; ++j)
{
FbxVector4 N;
fbxMesh->GetPolygonVertexNormal(i, j, N);
CCVector3 Npc( static_cast<PointCoordinateType>(N.Buffer()[0]),
static_cast<PointCoordinateType>(N.Buffer()[1]),
static_cast<PointCoordinateType>(N.Buffer()[2]) );
normsTable->addElement(ccNormalVectors::GetNormIndex(Npc.u));
}
mesh->addTriangleNormalIndexes(nIndex,nIndex+1,nIndex+2);
if (pSize == 4)
mesh->addTriangleNormalIndexes(nIndex,nIndex+2,nIndex+3);
}
}
if (mesh->size() == 0)
{
ccLog::Warning(QString("[FBX] No triangle found in mesh '%1'! (only triangles are supported for the moment)").arg(fbxMesh->GetName()));
delete mesh;
return 0;
}
}
//import vertices
{
const FbxVector4* fbxVertices = fbxMesh->GetControlPoints();
assert(vertices && fbxVertices);
CCVector3d Pshift(0,0,0);
for (int i=0; i<vertCount; ++i, ++fbxVertices)
{
const double* P = fbxVertices->Buffer();
assert(P[3] == 0);
//coordinate shift management
if (i == 0)
{
bool shiftAlreadyEnabled = (coordinatesShiftEnabled && *coordinatesShiftEnabled && coordinatesShift);
if (shiftAlreadyEnabled)
Pshift = *coordinatesShift;
bool applyAll = false;
if ( sizeof(PointCoordinateType) < 8
&& ccCoordinatesShiftManager::Handle(P,0,alwaysDisplayLoadDialog,shiftAlreadyEnabled,Pshift,0,applyAll))
{
vertices->setGlobalShift(Pshift);
ccLog::Warning("[FBX] Mesh has been recentered! Translation: (%.2f,%.2f,%.2f)",Pshift.x,Pshift.y,Pshift.z);
//we save coordinates shift information
if (applyAll && coordinatesShiftEnabled && coordinatesShift)
{
*coordinatesShiftEnabled = true;
*coordinatesShift = Pshift;
}
}
}
CCVector3 PV( static_cast<PointCoordinateType>(P[0] + Pshift.x),
static_cast<PointCoordinateType>(P[1] + Pshift.y),
static_cast<PointCoordinateType>(P[2] + Pshift.z) );
vertices->addPoint(PV);
}
}
//import textures
{
//TODO
}
return mesh;
}
// Converts a CC mesh to an FBX mesh
static FbxNode* ToFbxMesh(ccGenericMesh* mesh, FbxScene* pScene)
{
if (!mesh)
return 0;
FbxMesh* lMesh = FbxMesh::Create(pScene, qPrintable(mesh->getName()));
ccGenericPointCloud* cloud = mesh->getAssociatedCloud();
if (!cloud)
return 0;
unsigned vertCount = cloud->size();
unsigned faceCount = mesh->size();
// Create control points.
{
lMesh->InitControlPoints(vertCount);
FbxVector4* lControlPoints = lMesh->GetControlPoints();
for (unsigned i=0; i<vertCount; ++i)
{
const CCVector3* P = cloud->getPoint(i);
lControlPoints[i] = FbxVector4(P->x,P->y,P->z);
}
}
ccMesh* asCCMesh = 0;
if (mesh->isA(CC_MESH))
asCCMesh = static_cast<ccMesh*>(mesh);
// normals
if (mesh->hasNormals())
{
FbxGeometryElementNormal* lGeometryElementNormal = lMesh->CreateElementNormal();
if (mesh->hasTriNormals())
{
// We want to have one normal per vertex of each polygon,
// so we set the mapping mode to eByPolygonVertex.
lGeometryElementNormal->SetMappingMode(FbxGeometryElement::eByPolygonVertex);
lGeometryElementNormal->SetReferenceMode(FbxGeometryElement::eIndexToDirect);
lGeometryElementNormal->GetIndexArray().SetCount(faceCount*3);
if (asCCMesh)
{
NormsIndexesTableType* triNorms = asCCMesh->getTriNormsTable();
assert(triNorms);
for (unsigned i=0; i<triNorms->currentSize(); ++i)
{
const PointCoordinateType* N = ccNormalVectors::GetNormal(triNorms->getValue(i));
FbxVector4 Nfbx(N[0],N[1],N[2]);
lGeometryElementNormal->GetDirectArray().Add(Nfbx);
}
for (unsigned j=0; j<faceCount; ++j)
{
int i1,i2,i3;
asCCMesh->getTriangleNormalIndexes(j,i1,i2,i3);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+0, i1);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+1, i2);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+2, i3);
}
}
else
{
for (unsigned j=0; j<faceCount; ++j)
{
//we can't use the 'NormsIndexesTable' so we save all the normals of all the vertices
CCVector3 Na,Nb,Nc;
lGeometryElementNormal->GetDirectArray().Add(FbxVector4(Na.x,Na.y,Na.z));
lGeometryElementNormal->GetDirectArray().Add(FbxVector4(Nb.x,Nb.y,Nb.z));
lGeometryElementNormal->GetDirectArray().Add(FbxVector4(Nc.x,Nc.y,Nc.z));
mesh->getTriangleNormals(j,Na,Nb,Nc);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+0, static_cast<int>(j)*3+0);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+1, static_cast<int>(j)*3+1);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+2, static_cast<int>(j)*3+2);
}
}
}
else
{
// We want to have one normal for each vertex (or control point),
// so we set the mapping mode to eByControlPoint.
lGeometryElementNormal->SetMappingMode(FbxGeometryElement::eByControlPoint);
// The first method is to set the actual normal value
// for every control point.
lGeometryElementNormal->SetReferenceMode(FbxGeometryElement::eDirect);
for (unsigned i=0; i<vertCount; ++i)
{
const PointCoordinateType* N = cloud->getPointNormal(i);
FbxVector4 Nfbx(N[0],N[1],N[2]);
lGeometryElementNormal->GetDirectArray().Add(Nfbx);
}
}
}
else
{
ccLog::Warning("[FBX] Mesh has no normal! You can manually compute them (select it then call \"Edit > Normals > Compute\")");
}
// colors
if (cloud->hasColors())
{
FbxGeometryElementVertexColor* lGeometryElementVertexColor = lMesh->CreateElementVertexColor();
lGeometryElementVertexColor->SetMappingMode(FbxGeometryElement::eByControlPoint);
lGeometryElementVertexColor->SetReferenceMode(FbxGeometryElement::eDirect);
for (unsigned i=0; i<vertCount; ++i)
{
const colorType* C = cloud->getPointColor(i);
FbxColor col( FbxDouble3( static_cast<double>(C[0])/MAX_COLOR_COMP,
static_cast<double>(C[1])/MAX_COLOR_COMP,
static_cast<double>(C[2])/MAX_COLOR_COMP ) );
lGeometryElementVertexColor->GetDirectArray().Add(col);
}
}
// Set material mapping.
//FbxGeometryElementMaterial* lMaterialElement = lMesh->CreateElementMaterial();
//lMaterialElement->SetMappingMode(FbxGeometryElement::eByPolygon);
//lMaterialElement->SetReferenceMode(FbxGeometryElement::eIndexToDirect);
// Create polygons. Assign material indices.
{
for (unsigned j=0; j<faceCount; ++j)
{
const CCLib::TriangleSummitsIndexes* tsi = mesh->getTriangleIndexes(j);
lMesh->BeginPolygon(static_cast<int>(j));
lMesh->AddPolygon(tsi->i1);
lMesh->AddPolygon(tsi->i2);
lMesh->AddPolygon(tsi->i3);
lMesh->EndPolygon();
}
}
FbxNode* lNode = FbxNode::Create(pScene,qPrintable(mesh->getName()));
lNode->SetNodeAttribute(lMesh);
//CreateMaterials(pScene, lMesh);
return lNode;
}
void loadVertexColor(FbxMesh* fbxMesh, int vertexIndex, int controlPointIndex, Vertex* vertex)
{
if (fbxMesh->GetElementVertexColorCount() > 0)
{
// Get only the first vertex color.
FbxGeometryElementVertexColor* vertexColor = fbxMesh->GetElementVertexColor(0);
FbxGeometryElement::EMappingMode mappingMode = vertexColor->GetMappingMode();
if (mappingMode == FbxGeometryElement::eByControlPoint)
{
switch (vertexColor->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
{
FbxColor color = vertexColor->GetDirectArray().GetAt(controlPointIndex);
vertex->hasDiffuse = true;
vertex->diffuse.x = (float)color.mRed;
vertex->diffuse.y = (float)color.mGreen;
vertex->diffuse.z = (float)color.mBlue;
vertex->diffuse.w = (float)color.mAlpha;
}
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = vertexColor->GetIndexArray().GetAt(controlPointIndex);
FbxColor color = vertexColor->GetDirectArray().GetAt(id);
vertex->hasDiffuse = true;
vertex->diffuse.x = (float)color.mRed;
vertex->diffuse.y = (float)color.mGreen;
vertex->diffuse.z = (float)color.mBlue;
vertex->diffuse.w = (float)color.mAlpha;
}
break;
default:
break;
}
}
else if (mappingMode == FbxGeometryElement::eByPolygonVertex)
{
switch (vertexColor->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
{
FbxColor color = vertexColor->GetDirectArray().GetAt(vertexIndex);
vertex->hasDiffuse = true;
vertex->diffuse.x = (float)color.mRed;
vertex->diffuse.y = (float)color.mGreen;
vertex->diffuse.z = (float)color.mBlue;
vertex->diffuse.w = (float)color.mAlpha;
}
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = vertexColor->GetIndexArray().GetAt(vertexIndex);
FbxColor color = vertexColor->GetDirectArray().GetAt(id);
vertex->hasDiffuse = true;
vertex->diffuse.x = (float)color.mRed;
vertex->diffuse.y = (float)color.mGreen;
vertex->diffuse.z = (float)color.mBlue;
vertex->diffuse.w = (float)color.mAlpha;
}
break;
default:
break;
}
}
}
}
void fbxLoader2::readColor(FbxMesh* mesh, int controlPointIndex, int vertexCounter, D3DXVECTOR4* color)
{
if(mesh->GetElementVertexColorCount()<1)
{
return;
}
FbxGeometryElementVertexColor* vertexColor = mesh->GetElementVertexColor(0);
switch(vertexColor->GetMappingMode())
{
case FbxGeometryElement::eByControlPoint:
{
switch(vertexColor->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
{
color->x = (float)vertexColor->GetDirectArray().GetAt(controlPointIndex).mRed;
color->y = (float)vertexColor->GetDirectArray().GetAt(controlPointIndex).mGreen;
color->z = (float)vertexColor->GetDirectArray().GetAt(controlPointIndex).mBlue;
color->w = (float)vertexColor->GetDirectArray().GetAt(controlPointIndex).mAlpha;
}
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = vertexColor->GetIndexArray().GetAt(controlPointIndex);
color->x = (float)vertexColor->GetDirectArray().GetAt(id).mRed;
color->y = (float)vertexColor->GetDirectArray().GetAt(id).mGreen;
color->z = (float)vertexColor->GetDirectArray().GetAt(id).mBlue;
color->w = (float)vertexColor->GetDirectArray().GetAt(id).mAlpha;
}
break;
default:
break;
}
}
break;
case FbxGeometryElement::eByPolygonVertex:
{
switch(vertexColor->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
{
color->x = (float)vertexColor->GetDirectArray().GetAt(vertexCounter).mRed;
color->y = (float)vertexColor->GetDirectArray().GetAt(vertexCounter).mGreen;
color->z = (float)vertexColor->GetDirectArray().GetAt(vertexCounter).mBlue;
color->w = (float)vertexColor->GetDirectArray().GetAt(vertexCounter).mAlpha;
}
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = vertexColor->GetIndexArray().GetAt(vertexCounter);
color->x = (float)vertexColor->GetDirectArray().GetAt(id).mRed;
color->y = (float)vertexColor->GetDirectArray().GetAt(id).mGreen;
color->z = (float)vertexColor->GetDirectArray().GetAt(id).mBlue;
color->w = (float)vertexColor->GetDirectArray().GetAt(id).mAlpha;
}
break;
default:
break;
}
}
break;
}
}
//converts a FBX mesh to a CC mesh
static ccMesh* FromFbxMesh(FbxMesh* fbxMesh, FileIOFilter::LoadParameters& parameters)
{
if (!fbxMesh)
return 0;
int polyCount = fbxMesh->GetPolygonCount();
//fbxMesh->GetLayer(
unsigned triCount = 0;
unsigned polyVertCount = 0; //different from vertCount (vertices can be counted multiple times here!)
//as we can't load all polygons (yet ;) we already look if we can load any!
{
unsigned skipped = 0;
for (int i=0; i<polyCount; ++i)
{
int pSize = fbxMesh->GetPolygonSize(i);
if (pSize == 3)
{
++triCount;
polyVertCount += 3;
}
else if (pSize == 4)
{
triCount += 2;
polyVertCount += 4;
}
else
{
++skipped;
}
}
if (triCount == 0)
{
ccLog::Warning(QString("[FBX] No triangle or quad found in mesh '%1'! (polygons with more than 4 vertices are not supported for the moment)").arg(fbxMesh->GetName()));
return 0;
}
else if (skipped != 0)
{
ccLog::Warning(QString("[FBX] Some polygons in mesh '%1' were ignored (%2): polygons with more than 4 vertices are not supported for the moment)").arg(fbxMesh->GetName()).arg(skipped));
return 0;
}
}
int vertCount = fbxMesh->GetControlPointsCount();
if (vertCount <= 0)
{
ccLog::Warning(QString("[FBX] Mesh '%1' has no vetex or no polygon?!").arg(fbxMesh->GetName()));
return 0;
}
ccPointCloud* vertices = new ccPointCloud("vertices");
ccMesh* mesh = new ccMesh(vertices);
mesh->setName(fbxMesh->GetName());
mesh->addChild(vertices);
vertices->setEnabled(false);
if (!mesh->reserve(static_cast<unsigned>(triCount)) || !vertices->reserve(vertCount))
{
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1'!").arg(fbxMesh->GetName()));
delete mesh;
return 0;
}
//colors
{
for (int l=0; l<fbxMesh->GetElementVertexColorCount(); l++)
{
FbxGeometryElementVertexColor* vertColor = fbxMesh->GetElementVertexColor(l);
//CC can only handle per-vertex colors
if (vertColor->GetMappingMode() == FbxGeometryElement::eByControlPoint)
{
if (vertColor->GetReferenceMode() == FbxGeometryElement::eDirect
|| vertColor->GetReferenceMode() == FbxGeometryElement::eIndexToDirect)
{
if (vertices->reserveTheRGBTable())
{
switch (vertColor->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
{
for (int i=0; i<vertCount; ++i)
{
FbxColor c = vertColor->GetDirectArray().GetAt(i);
vertices->addRGBColor( static_cast<colorType>(c.mRed * ccColor::MAX),
static_cast<colorType>(c.mGreen * ccColor::MAX),
static_cast<colorType>(c.mBlue * ccColor::MAX) );
}
}
break;
case FbxGeometryElement::eIndexToDirect:
{
for (int i=0; i<vertCount; ++i)
{
int id = vertColor->GetIndexArray().GetAt(i);
FbxColor c = vertColor->GetDirectArray().GetAt(id);
vertices->addRGBColor( static_cast<colorType>(c.mRed * ccColor::MAX),
static_cast<colorType>(c.mGreen * ccColor::MAX),
static_cast<colorType>(c.mBlue * ccColor::MAX) );
}
}
break;
default:
assert(false);
break;
}
vertices->showColors(true);
mesh->showColors(true);
break; //no need to look for other color fields (we won't be able to handle them!
}
else
{
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1' colors!").arg(fbxMesh->GetName()));
}
}
else
{
ccLog::Warning(QString("[FBX] Color field #%i of mesh '%1' will be ignored (unhandled type)").arg(l).arg(fbxMesh->GetName()));
}
}
else
{
ccLog::Warning(QString("[FBX] Color field #%i of mesh '%1' will be ignored (unhandled type)").arg(l).arg(fbxMesh->GetName()));
}
}
}
//normals can be per vertices or per-triangle
int perPointNormals = -1;
int perVertexNormals = -1;
int perPolygonNormals = -1;
{
for (int j=0; j<fbxMesh->GetElementNormalCount(); j++)
{
FbxGeometryElementNormal* leNormals = fbxMesh->GetElementNormal(j);
switch(leNormals->GetMappingMode())
{
case FbxGeometryElement::eByControlPoint:
perPointNormals = j;
break;
case FbxGeometryElement::eByPolygonVertex:
perVertexNormals = j;
break;
case FbxGeometryElement::eByPolygon:
perPolygonNormals = j;
break;
default:
//not handled
break;
}
}
}
//per-point normals
if (perPointNormals >= 0)
{
FbxGeometryElementNormal* leNormals = fbxMesh->GetElementNormal(perPointNormals);
FbxLayerElement::EReferenceMode refMode = leNormals->GetReferenceMode();
const FbxLayerElementArrayTemplate<FbxVector4>& normals = leNormals->GetDirectArray();
assert(normals.GetCount() == vertCount);
if (normals.GetCount() != vertCount)
{
ccLog::Warning(QString("[FBX] Wrong number of normals on mesh '%1'!").arg(fbxMesh->GetName()));
perPointNormals = -1;
}
else if (!vertices->reserveTheNormsTable())
{
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1' normals!").arg(fbxMesh->GetName()));
perPointNormals = -1;
}
else
{
//import normals
for (int i=0; i<vertCount; ++i)
{
int id = refMode != FbxGeometryElement::eDirect ? leNormals->GetIndexArray().GetAt(i) : i;
FbxVector4 N = normals.GetAt(id);
//convert to CC-structure
CCVector3 Npc( static_cast<PointCoordinateType>(N.Buffer()[0]),
static_cast<PointCoordinateType>(N.Buffer()[1]),
static_cast<PointCoordinateType>(N.Buffer()[2]) );
vertices->addNorm(Npc);
}
vertices->showNormals(true);
mesh->showNormals(true);
//no need to import the other normals (if any)
perVertexNormals = -1;
perPolygonNormals = -1;
}
}
//per-triangle normals
NormsIndexesTableType* normsTable = 0;
if (perVertexNormals >= 0 || perPolygonNormals >= 0)
{
normsTable = new NormsIndexesTableType();
if (!normsTable->reserve(polyVertCount) || !mesh->reservePerTriangleNormalIndexes())
{
ccLog::Warning(QString("[FBX] Not enough memory to load mesh '%1' normals!").arg(fbxMesh->GetName()));
normsTable->release();
normsTable = 0;
}
else
{
mesh->setTriNormsTable(normsTable);
vertices->showNormals(true);
mesh->showNormals(true);
}
}
//materials
ccMaterialSet* materials = 0;
{
FbxNode* lNode = fbxMesh->GetNode();
int lMaterialCount = lNode ? lNode->GetMaterialCount() : 0;
for (int i=0; i<lMaterialCount; i++)
{
FbxSurfaceMaterial *lBaseMaterial = lNode->GetMaterial(i);
bool isLambert = lBaseMaterial->GetClassId().Is(FbxSurfaceLambert::ClassId);
bool isPhong = lBaseMaterial->GetClassId().Is(FbxSurfacePhong::ClassId);
if (isLambert || isPhong)
{
ccMaterial::Shared mat(new ccMaterial(lBaseMaterial->GetName()));
FbxSurfaceLambert* lLambertMat = static_cast<FbxSurfaceLambert*>(lBaseMaterial);
float ambient[4];
float diffuse[4];
float emission[4];
float specular[4];
FbxSurfacePhong* lPhongMat = isPhong ? static_cast<FbxSurfacePhong*>(lBaseMaterial) : 0;
for (int k=0; k<3; ++k)
{
ambient[k] = static_cast<float>(lLambertMat->Ambient.Get()[k]);
diffuse[k] = static_cast<float>(lLambertMat->Diffuse.Get()[k]);
emission[k] = static_cast<float>(lLambertMat->Emissive.Get()[k]);
if (lPhongMat)
{
specular[k] = static_cast<float>(lPhongMat->Specular.Get()[k]);
}
}
mat->setAmbient(ambient);
mat->setDiffuse(diffuse);
mat->setEmission(emission);
if (isPhong)
{
mat->setSpecular(specular);
assert(lPhongMat);
mat->setShininess(static_cast<float>(lPhongMat->Shininess));
}
//import associated texture (if any)
{
int lTextureIndex;
FBXSDK_FOR_EACH_TEXTURE(lTextureIndex)
{
FbxProperty lProperty = lBaseMaterial->FindProperty(FbxLayerElement::sTextureChannelNames[lTextureIndex]);
if( lProperty.IsValid() )
{
int lTextureCount = lProperty.GetSrcObjectCount<FbxTexture>();
FbxTexture* texture = 0; //we can handle only one texture per material! We'll take the non layered one by default (if any)
for (int j = 0; j < lTextureCount; ++j)
{
//Here we have to check if it's layeredtextures, or just textures:
FbxLayeredTexture *lLayeredTexture = lProperty.GetSrcObject<FbxLayeredTexture>(j);
if (lLayeredTexture)
{
//we don't handle layered textures!
/*int lNbTextures = lLayeredTexture->GetSrcObjectCount<FbxTexture>();
for (int k=0; k<lNbTextures; ++k)
{
FbxTexture* lTexture = lLayeredTexture->GetSrcObject<FbxTexture>(k);
if(lTexture)
{
}
}
//*/
}
else
{
//non-layered texture
FbxTexture* lTexture = lProperty.GetSrcObject<FbxTexture>(j);
if(lTexture)
{
//we take the first non layered texture by default
texture = lTexture;
break;
}
}
}
if (texture)
{
FbxFileTexture *lFileTexture = FbxCast<FbxFileTexture>(texture);
if (lFileTexture)
{
const char* texAbsoluteFilename = lFileTexture->GetFileName();
ccLog::PrintDebug(QString("[FBX] Texture absolue filename: %1").arg(texAbsoluteFilename));
if (texAbsoluteFilename != 0 && texAbsoluteFilename[0] != 0)
{
if (!mat->loadAndSetTexture(texAbsoluteFilename))
{
ccLog::Warning(QString("[FBX] Failed to load texture file: %1").arg(texAbsoluteFilename));
}
}
}
}
}
}
}
if (!materials)
{
materials = new ccMaterialSet("materials");
mesh->addChild(materials);
}
materials->addMaterial(mat);
}
else
{
ccLog::Warning(QString("[FBX] Material '%1' has an unhandled type").arg(lBaseMaterial->GetName()));
}
}
// Converts a CC mesh to an FBX mesh
static FbxNode* ToFbxMesh(ccGenericMesh* mesh, FbxScene* pScene, QString filename, size_t meshIndex)
{
if (!mesh)
return 0;
FbxNode* lNode = FbxNode::Create(pScene,qPrintable(mesh->getName()));
FbxMesh* lMesh = FbxMesh::Create(pScene, qPrintable(mesh->getName()));
lNode->SetNodeAttribute(lMesh);
ccGenericPointCloud* cloud = mesh->getAssociatedCloud();
if (!cloud)
return 0;
unsigned vertCount = cloud->size();
unsigned faceCount = mesh->size();
// Create control points.
{
lMesh->InitControlPoints(vertCount);
FbxVector4* lControlPoints = lMesh->GetControlPoints();
for (unsigned i=0; i<vertCount; ++i)
{
const CCVector3* P = cloud->getPoint(i);
lControlPoints[i] = FbxVector4(P->x,P->y,P->z);
//lControlPoints[i] = FbxVector4(P->x,P->z,-P->y); //DGM: see loadFile (Y and Z are inverted)
}
}
ccMesh* asCCMesh = 0;
if (mesh->isA(CC_TYPES::MESH))
asCCMesh = static_cast<ccMesh*>(mesh);
// normals
if (mesh->hasNormals())
{
FbxGeometryElementNormal* lGeometryElementNormal = lMesh->CreateElementNormal();
if (mesh->hasTriNormals())
{
// We want to have one normal per vertex of each polygon,
// so we set the mapping mode to eByPolygonVertex.
lGeometryElementNormal->SetMappingMode(FbxGeometryElement::eByPolygonVertex);
lGeometryElementNormal->SetReferenceMode(FbxGeometryElement::eIndexToDirect);
lGeometryElementNormal->GetIndexArray().SetCount(faceCount*3);
if (asCCMesh)
{
NormsIndexesTableType* triNorms = asCCMesh->getTriNormsTable();
assert(triNorms);
for (unsigned i=0; i<triNorms->currentSize(); ++i)
{
const CCVector3& N = ccNormalVectors::GetNormal(triNorms->getValue(i));
FbxVector4 Nfbx(N.x,N.y,N.z);
lGeometryElementNormal->GetDirectArray().Add(Nfbx);
}
for (unsigned j=0; j<faceCount; ++j)
{
int i1,i2,i3;
asCCMesh->getTriangleNormalIndexes(j,i1,i2,i3);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+0, i1);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+1, i2);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+2, i3);
}
}
else
{
for (unsigned j=0; j<faceCount; ++j)
{
//we can't use the 'NormsIndexesTable' so we save all the normals of all the vertices
CCVector3 Na,Nb,Nc;
lGeometryElementNormal->GetDirectArray().Add(FbxVector4(Na.x,Na.y,Na.z));
lGeometryElementNormal->GetDirectArray().Add(FbxVector4(Nb.x,Nb.y,Nb.z));
lGeometryElementNormal->GetDirectArray().Add(FbxVector4(Nc.x,Nc.y,Nc.z));
mesh->getTriangleNormals(j,Na,Nb,Nc);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+0, static_cast<int>(j)*3+0);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+1, static_cast<int>(j)*3+1);
lGeometryElementNormal->GetIndexArray().SetAt(static_cast<int>(j)*3+2, static_cast<int>(j)*3+2);
}
}
}
else
{
// We want to have one normal for each vertex (or control point),
// so we set the mapping mode to eByControlPoint.
lGeometryElementNormal->SetMappingMode(FbxGeometryElement::eByControlPoint);
// The first method is to set the actual normal value
// for every control point.
lGeometryElementNormal->SetReferenceMode(FbxGeometryElement::eDirect);
for (unsigned i=0; i<vertCount; ++i)
{
const CCVector3& N = cloud->getPointNormal(i);
FbxVector4 Nfbx(N.x,N.y,N.z);
lGeometryElementNormal->GetDirectArray().Add(Nfbx);
}
}
}
else
{
ccLog::Warning("[FBX] Mesh has no normal! You can manually compute them (select it then call \"Edit > Normals > Compute\")");
}
// Set material mapping.
bool hasMaterial = false;
if (asCCMesh && asCCMesh->hasMaterials())
{
const ccMaterialSet* matSet = asCCMesh->getMaterialSet();
size_t matCount = matSet->size();
//check if we have textures
bool hasTextures = asCCMesh->hasTextures();
if (hasTextures)
{
//check that we actually have materials with textures as well!
hasTextures = false;
for (size_t i=0; i<matCount; ++i)
{
ccMaterial::CShared mat = matSet->at(i);
if (mat->hasTexture())
{
hasTextures = true;
break;
}
}
}
static const char gDiffuseElementName[] = "DiffuseUV";
// Create UV for Diffuse channel
if (hasTextures)
{
FbxGeometryElementUV* lUVDiffuseElement = lMesh->CreateElementUV(gDiffuseElementName);
assert(lUVDiffuseElement != 0);
lUVDiffuseElement->SetMappingMode(FbxGeometryElement::eByPolygonVertex);
lUVDiffuseElement->SetReferenceMode(FbxGeometryElement::eIndexToDirect);
//fill Direct Array
const TextureCoordsContainer* texCoords = asCCMesh->getTexCoordinatesTable();
assert(texCoords);
if (texCoords)
{
unsigned count = texCoords->currentSize();
lUVDiffuseElement->GetDirectArray().SetCount(static_cast<int>(count));
for (unsigned i=0; i<count; ++i)
{
const float* uv = texCoords->getValue(i);
lUVDiffuseElement->GetDirectArray().SetAt(i,FbxVector2(uv[0],uv[1]));
}
}
//fill Indexes Array
assert(asCCMesh->hasPerTriangleTexCoordIndexes());
if (asCCMesh->hasPerTriangleTexCoordIndexes())
{
unsigned triCount = asCCMesh->size();
lUVDiffuseElement->GetIndexArray().SetCount(static_cast<int>(3*triCount));
for (unsigned j=0; j<triCount; ++j)
{
int t1=0, t2=0, t3=0;
asCCMesh->getTriangleTexCoordinatesIndexes(j, t1, t2, t3);
lUVDiffuseElement->GetIndexArray().SetAt(j*3+0,t1);
lUVDiffuseElement->GetIndexArray().SetAt(j*3+1,t2);
lUVDiffuseElement->GetIndexArray().SetAt(j*3+2,t3);
}
}
}
//Textures used in this file
QMap<QString,QString> texFilenames;
//directory to save textures (if any)
QFileInfo info(filename);
QString textDirName = info.baseName() + QString(".fbm");
QDir baseDir = info.absoluteDir();
QDir texDir = QDir(baseDir.absolutePath() + QString("/") + textDirName);
for (size_t i=0; i<matCount; ++i)
{
ccMaterial::CShared mat = matSet->at(i);
FbxSurfacePhong *lMaterial = FbxSurfacePhong::Create(pScene, qPrintable(mat->getName()));
const ccColor::Rgbaf& emission = mat->getEmission();
const ccColor::Rgbaf& ambient = mat->getAmbient();
const ccColor::Rgbaf& diffuse = mat->getDiffuseFront();
const ccColor::Rgbaf& specular = mat->getDiffuseFront();
lMaterial->Emissive.Set(FbxDouble3(emission.r,emission.g,emission.b));
lMaterial->Ambient .Set(FbxDouble3( ambient.r, ambient.g, ambient.b));
lMaterial->Diffuse .Set(FbxDouble3( diffuse.r, diffuse.g, diffuse.b));
lMaterial->Specular.Set(FbxDouble3(specular.r,specular.g,specular.b));
lMaterial->Shininess = mat->getShininessFront();
lMaterial->ShadingModel.Set("Phong");
if (hasTextures && mat->hasTexture())
{
QString texFilename = mat->getTextureFilename();
//texture has not already been processed
if (!texFilenames.contains(texFilename))
{
//if necessary, we (try to) create a subfolder to store textures
if (!texDir.exists())
{
texDir = baseDir;
if (texDir.mkdir(textDirName))
{
texDir.cd(textDirName);
}
else
{
textDirName = QString();
ccLog::Warning("[FBX] Failed to create subfolder '%1' to store texture files (files will be stored next to the .fbx file)");
}
}
QFileInfo fileInfo(texFilename);
QString baseTexName = fileInfo.fileName();
//add extension
QString extension = QFileInfo(texFilename).suffix();
if (fileInfo.suffix().isEmpty())
baseTexName += QString(".png");
QString absoluteFilename = texDir.absolutePath() + QString("/") + baseTexName;
ccLog::PrintDebug(QString("[FBX] Material '%1' texture: %2").arg(mat->getName()).arg(absoluteFilename));
texFilenames[texFilename] = absoluteFilename;
}
//mat.texture.save(absoluteFilename);
// Set texture properties.
FbxFileTexture* lTexture = FbxFileTexture::Create(pScene,"DiffuseTexture");
assert(!texFilenames[texFilename].isEmpty());
lTexture->SetFileName(qPrintable(texFilenames[texFilename]));
lTexture->SetTextureUse(FbxTexture::eStandard);
lTexture->SetMappingType(FbxTexture::eUV);
lTexture->SetMaterialUse(FbxFileTexture::eModelMaterial);
lTexture->SetSwapUV(false);
lTexture->SetTranslation(0.0, 0.0);
lTexture->SetScale(1.0, 1.0);
lTexture->SetRotation(0.0, 0.0);
lTexture->UVSet.Set(FbxString(gDiffuseElementName)); // Connect texture to the proper UV
// don't forget to connect the texture to the corresponding property of the material
lMaterial->Diffuse.ConnectSrcObject(lTexture);
}
int matIndex = lNode->AddMaterial(lMaterial);
assert(matIndex == static_cast<int>(i));
}
//don't forget to save the texture files
{
for (QMap<QString,QString>::ConstIterator it = texFilenames.begin(); it != texFilenames.end(); ++it)
{
const QImage image = ccMaterial::GetTexture(it.key());
image.mirrored().save(it.value());
}
texFilenames.clear(); //don't need this anymore!
}
// Create 'triangle to material index' mapping
{
FbxGeometryElementMaterial* lMaterialElement = lMesh->CreateElementMaterial();
lMaterialElement->SetMappingMode(FbxGeometryElement::eByPolygon);
lMaterialElement->SetReferenceMode(FbxGeometryElement::eIndexToDirect);
}
hasMaterial = true;
}
// colors
if (cloud->hasColors())
{
FbxGeometryElementVertexColor* lGeometryElementVertexColor = lMesh->CreateElementVertexColor();
lGeometryElementVertexColor->SetMappingMode(FbxGeometryElement::eByControlPoint);
lGeometryElementVertexColor->SetReferenceMode(FbxGeometryElement::eDirect);
lGeometryElementVertexColor->GetDirectArray().SetCount(vertCount);
for (unsigned i=0; i<vertCount; ++i)
{
const colorType* C = cloud->getPointColor(i);
FbxColor col( static_cast<double>(C[0])/ccColor::MAX,
static_cast<double>(C[1])/ccColor::MAX,
static_cast<double>(C[2])/ccColor::MAX );
lGeometryElementVertexColor->GetDirectArray().SetAt(i,col);
}
if (!hasMaterial)
{
//it seems that we have to create a fake material in order for the colors to be displayed (in Unity and FBX Review at least)!
FbxSurfacePhong *lMaterial = FbxSurfacePhong::Create(pScene, "ColorMaterial");
lMaterial->Emissive.Set(FbxDouble3(0,0,0));
lMaterial->Ambient.Set(FbxDouble3(0,0,0));
lMaterial->Diffuse.Set(FbxDouble3(1,1,1));
lMaterial->Specular.Set(FbxDouble3(0,0,0));
lMaterial->Shininess = 0;
lMaterial->ShadingModel.Set("Phong");
FbxGeometryElementMaterial* lMaterialElement = lMesh->CreateElementMaterial();
lMaterialElement->SetMappingMode(FbxGeometryElement::eAllSame);
lMaterialElement->SetReferenceMode(FbxGeometryElement::eDirect);
lNode->AddMaterial(lMaterial);
}
}
// Create polygons
{
for (unsigned j=0; j<faceCount; ++j)
{
const CCLib::TriangleSummitsIndexes* tsi = mesh->getTriangleIndexes(j);
int matIndex = hasMaterial ? asCCMesh->getTriangleMtlIndex(j) : -1;
lMesh->BeginPolygon(matIndex);
lMesh->AddPolygon(tsi->i1);
lMesh->AddPolygon(tsi->i2);
lMesh->AddPolygon(tsi->i3);
lMesh->EndPolygon();
}
}
return lNode;
}
Submesh *FBX::buildSubmeshFromFBX(FbxMesh *lMesh, int material_index, bool single_material) {
int lPolygonCount=lMesh->GetPolygonCount();
FbxLayerElementArrayTemplate<int>* lMaterialIndice = NULL;
bool add=false;
if (!single_material) {
FbxGeometryElement::EMappingMode lMaterialMappingMode = FbxGeometryElement::eNone;
if (lMesh->GetElementMaterial()) {
lMaterialIndice = &lMesh->GetElementMaterial()->GetIndexArray();
lMaterialMappingMode = lMesh->GetElementMaterial()->GetMappingMode();
if (!lMaterialIndice) printf("Mesh has no material index element.\n");
if (lMaterialIndice && lMaterialMappingMode == FbxGeometryElement::eByPolygon) {
if (lMaterialIndice->GetCount() == lPolygonCount) {
add = true;
}
}
}
}
else add = true;
if (add) {
vector<Vertex *> new_vertices;
vector<Vector3> new_faces;
int control_points_count=lMesh->GetControlPointsCount();
FbxVector4 *control_points=lMesh->GetControlPoints();
int vertex_index = 0;
for (int lPolygonIndex = 0; lPolygonIndex < lPolygonCount; ++lPolygonIndex) {
if (lMaterialIndice) {
const int lMaterialIndex = lMaterialIndice->GetAt(lPolygonIndex);
if (lMaterialIndex != material_index) continue;
}
int polygon_size=lMesh->GetPolygonSize(lPolygonIndex);
if (polygon_size == 3) {
Vector3 face;
for (int j=0; j<polygon_size; j++) {
Vertex *vertex=new Vertex();
int control_point_index=lMesh->GetPolygonVertex(lPolygonIndex, j);
FbxVector4 control_point=control_points[control_point_index];
vertex->setPosition(Vector3(control_point[0], control_point[2], -control_point[1]));
// Get Normal for Vertex
FbxVector4 normal;
lMesh->GetPolygonVertexNormal(lPolygonIndex, j, normal);
vertex->setNormal(Vector3(normal[0], normal[2], -normal[1]));
// Get UVs for Vertex
FbxStringList uv_sets;
lMesh->GetUVSetNames(uv_sets);
for (int set=0; set<uv_sets.GetCount(); set++) {
if (set >= 4) break;
FbxVector2 uv;
bool no_uv;
lMesh->GetPolygonVertexUV(lPolygonIndex, j, uv_sets[set].Buffer(), uv, no_uv);
vertex->setUV(Vector2(uv[0], 1.0 - uv[1]), set);
}
// Get Vertex Color for Vertex
FbxColor vtx_c(1.0, 1.0, 1.0, 1.0);
for (int l = 0; l < lMesh->GetElementVertexColorCount(); l++) {
FbxGeometryElementVertexColor* leVtxc = lMesh->GetElementVertexColor(l);
if (leVtxc->GetMappingMode() == FbxGeometryElement::eByControlPoint) {
if (leVtxc->GetReferenceMode() == FbxGeometryElement::eDirect) {
vtx_c = leVtxc->GetDirectArray().GetAt(control_point_index);
}
else if (leVtxc->GetReferenceMode() == FbxGeometryElement::eIndexToDirect) {
int id = leVtxc->GetIndexArray().GetAt(control_point_index);
vtx_c = leVtxc->GetDirectArray().GetAt(id);
}
}
else if (leVtxc->GetMappingMode() == FbxGeometryElement::eByPolygonVertex) {
if (leVtxc->GetReferenceMode() == FbxGeometryElement::eDirect) {
vtx_c = leVtxc->GetDirectArray().GetAt(vertex_index);
}
else if (leVtxc->GetReferenceMode() == FbxGeometryElement::eIndexToDirect) {
int id = leVtxc->GetIndexArray().GetAt(vertex_index);
vtx_c = leVtxc->GetDirectArray().GetAt(id);
}
}
}
vertex->setColor(Color(vtx_c.mRed, vtx_c.mGreen, vtx_c.mBlue, vtx_c.mAlpha));
if (j == 0) face.x=new_vertices.size();
if (j == 1) face.y=new_vertices.size();
if (j == 2) face.z=new_vertices.size();
new_vertices.push_back(vertex);
vertex_index++;
}
new_faces.push_back(face);
}
else printf("Unsupported polygon size %d.\n", polygon_size);
}
printf("Building submesh with %d vertices and %d faces\n", new_vertices.size(), new_faces.size());
if ((new_vertices.size() >= 3) && new_faces.size()) {
Submesh *submesh=new Submesh();
submesh->build(new_vertices, new_faces);
submesh->addBone(0);
VertexFormat *vertex_format=new VertexFormat(LIBGENS_VERTEX_FORMAT_PC);
submesh->setVertexFormat(vertex_format);
return submesh;
}
}
return NULL;
}
void ExportFbxMesh(const Value& obj)
{
string name = obj["Name"].GetString();
FbxNode* pNode = FbxNode::Create(pManager, name.c_str());
FbxMesh* pMesh = FbxMesh::Create(pManager, name.c_str());
pNode->AddNodeAttribute(pMesh);
pScene->GetRootNode()->AddChild(pNode);
int numVertex = obj["NumVertex"].GetInt();
{
pMesh->InitControlPoints(numVertex);
FbxVector4* lControlPoints = pMesh->GetControlPoints();
const Value& pos = obj["Position"];
for (int i = 0; i < numVertex; i++)
{
double x = pos[i * 3 + 0].GetDouble();
x = -x;
double y = pos[i * 3 + 1].GetDouble();
double z = pos[i * 3 + 2].GetDouble();
lControlPoints[i] = FbxVector4(x, y, z);
}
}
{
FbxGeometryElementNormal* lGeometryElementNormal = pMesh->CreateElementNormal();
lGeometryElementNormal->SetMappingMode(FbxGeometryElement::eByControlPoint);
lGeometryElementNormal->SetReferenceMode(FbxGeometryElement::eDirect);
FbxLayerElementArrayTemplate<FbxVector4>& array = lGeometryElementNormal->GetDirectArray();
const Value& normal = obj["Normal"];
for (int i = 0; i < numVertex; i++)
{
double x = normal[i * 3 + 0].GetDouble();
x = -x;
double y = normal[i * 3 + 1].GetDouble();
double z = normal[i * 3 + 2].GetDouble();
array.Add(FbxVector4(x, y, z));
}
}
{
FbxGeometryElementUV* lUVDiffuseElement = pMesh->CreateElementUV("DiffuseUV");
FBX_ASSERT(lUVDiffuseElement != NULL);
lUVDiffuseElement->SetMappingMode(FbxGeometryElement::eByControlPoint);
lUVDiffuseElement->SetReferenceMode(FbxGeometryElement::eDirect);
FbxLayerElementArrayTemplate<FbxVector2>& array = lUVDiffuseElement->GetDirectArray();
const Value& v = obj["UV0"];
for (int i = 0; i < numVertex; i++)
{
double x = v[i * 2 + 0].GetDouble();
double y = v[i * 2 + 1].GetDouble();
array.Add(FbxVector2(x, y));
}
}
{
const Value& color = obj["Color"];
if (!color.IsNull())
{
FbxGeometryElementVertexColor* pColorElement = pMesh->CreateElementVertexColor();
FBX_ASSERT(pColorElement != NULL);
pColorElement->SetMappingMode(FbxGeometryElement::eByControlPoint);
pColorElement->SetReferenceMode(FbxGeometryElement::eDirect);
FbxLayerElementArrayTemplate<FbxColor>& array = pColorElement->GetDirectArray();
for (int i = 0; i < numVertex; i++)
{
double r = color[i * 4 + 0].GetDouble();
double g = color[i * 4 + 1].GetDouble();
double b = color[i * 4 + 2].GetDouble();
double a = color[i * 4 + 3].GetDouble();
array.Add(FbxColor(r, g, b, a));
}
}
}
{
const Value& Indeices = obj["Indeices"];
for (uint32_t subMesh = 0; subMesh < Indeices.Size(); subMesh++)
{
const Value& index0 = Indeices[subMesh];
int numIndex = index0.Size();
printf("index %d\n", numIndex);
for (int i = 0; i < numIndex / 3; i++)
{
pMesh->BeginPolygon(-1, -1, subMesh);
int index[3] = {
index0[i * 3 + 0].GetInt(),
index0[i * 3 + 1].GetInt(),
index0[i * 3 + 2].GetInt(),
};
pMesh->AddPolygon(index[0]);
pMesh->AddPolygon(index[2]);
pMesh->AddPolygon(index[1]);
pMesh->EndPolygon();
}
}
}
//////////////////////////////////////////////////////////////////////////
// export skin
const Value& boneIndex = obj["BoneIndex"];
if (!boneIndex.IsNull())
{
if (fbxBones.empty())
{
printf("no bones, can not export skin");
return;
}
const Value& boneWeight = obj["BoneWeight"];
vector<FbxCluster*> clusters(fbxBones.size(), NULL);
for (uint32_t i = 0; i < fbxBones.size(); i++) {
FbxCluster* pCluster = FbxCluster::Create(pScene, "");
pCluster->SetLink(fbxBones[i]);
pCluster->SetLinkMode(FbxCluster::eTotalOne);
clusters[i] = pCluster;
}
for (int i = 0; i < numVertex; i++) {
for (int j = 0; j < 4; j++) {
int bone = boneIndex[i * 4 + j].GetInt();
double weight = boneWeight[i * 4 + j].GetDouble();
clusters[bone]->AddControlPointIndex(i, weight);
}
}
FbxSkin* lSkin = FbxSkin::Create(pScene, "");
FbxScene* p = pNode->GetScene();
FbxAMatrix modelMatrix = pNode->EvaluateGlobalTransform();
for (uint32_t i = 0; i < clusters.size(); i++) {
clusters[i]->SetTransformMatrix(modelMatrix);
FbxAMatrix boneMatrix = fbxBones[i]->EvaluateGlobalTransform();
clusters[i]->SetTransformLinkMatrix(boneMatrix);
lSkin->AddCluster(clusters[i]);
}
pMesh->AddDeformer(lSkin);
}
}
//--------------------------------------------------------------------------
void SaveMesh(FbxNode* pNode, const VeDirectoryPtr& spDest) noexcept
{
Mesh kMesh;
FbxMesh* pMesh = (FbxMesh*)pNode->GetNodeAttribute();
kMesh.m_kName = pNode->GetName();
kMesh.m_stFaces = pMesh->GetPolygonCount();
kMesh.m_stVerts = kMesh.m_stFaces * 3;
kMesh.m_kIndices.resize(kMesh.m_stVerts);
kMesh.m_kPosition.resize(kMesh.m_stVerts);
kMesh.m_kNormals.resize(pMesh->GetElementNormalCount());
for (auto& v : kMesh.m_kNormals)
{
v.resize(kMesh.m_stVerts);
}
kMesh.m_kTexcoords.resize(pMesh->GetElementUVCount());
for (auto& v : kMesh.m_kTexcoords)
{
v.resize(kMesh.m_stVerts);
}
kMesh.m_kColors.resize(pMesh->GetElementVertexColorCount());
for (auto& v : kMesh.m_kColors)
{
v.resize(kMesh.m_stVerts);
}
int element_mat = -1;
for (int i(0); i < pMesh->GetElementMaterialCount(); ++i)
{
FbxGeometryElementMaterial* lMaterialElement = pMesh->GetElementMaterial(i);
if (lMaterialElement->GetMappingMode() == FbxGeometryElement::eByPolygon)
{
element_mat = i;
break;
}
}
if (element_mat >= 0)
{
kMesh.m_kAttributes.resize(kMesh.m_stFaces);
}
FbxVector4* lControlPoints = pMesh->GetControlPoints();
for (int i(0); i < (int)(kMesh.m_stFaces); ++i)
{
int lPolygonSize = pMesh->GetPolygonSize(i);
VE_ASSERT_ALWAYS(lPolygonSize == 3);
for (int j(0); j < lPolygonSize; ++j)
{
uint32_t u32Index = i * 3 + j;
kMesh.m_kIndices[u32Index] = u32Index;
int lControlPointIndex = pMesh->GetPolygonVertex(i, j);
auto& pos = kMesh.m_kPosition[u32Index];
pos.x = (float)lControlPoints[lControlPointIndex][0];
pos.y = (float)lControlPoints[lControlPointIndex][1];
pos.z = (float)lControlPoints[lControlPointIndex][2];
for (int k(0); k < (int)(kMesh.m_kColors.size()); ++k)
{
FbxColor c;
FbxGeometryElementVertexColor* leVtxc = pMesh->GetElementVertexColor(k);
switch (leVtxc->GetMappingMode())
{
default:
break;
case FbxGeometryElement::eByControlPoint:
switch (leVtxc->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
c = leVtxc->GetDirectArray().GetAt(lControlPointIndex);
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = leVtxc->GetIndexArray().GetAt(lControlPointIndex);
c = leVtxc->GetDirectArray().GetAt(id);
}
break;
default:
break; // other reference modes not shown here!
}
break;
case FbxGeometryElement::eByPolygonVertex:
{
switch (leVtxc->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
c = leVtxc->GetDirectArray().GetAt(u32Index);
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = leVtxc->GetIndexArray().GetAt(u32Index);
c = leVtxc->GetDirectArray().GetAt(id);
}
break;
default:
break; // other reference modes not shown here!
}
}
break;
case FbxGeometryElement::eByPolygon: // doesn't make much sense for UVs
case FbxGeometryElement::eAllSame: // doesn't make much sense for UVs
case FbxGeometryElement::eNone: // doesn't make much sense for UVs
break;
}
auto& color = kMesh.m_kColors[k][u32Index];
color.x = (float)c[0];
color.y = (float)c[1];
color.z = (float)c[2];
color.w = (float)c[3];
}
for (int k(0); k < (int)(kMesh.m_kTexcoords.size()); ++k)
{
FbxVector2 uv;
FbxGeometryElementUV* leUV = pMesh->GetElementUV(k);
switch (leUV->GetMappingMode())
{
default:
break;
case FbxGeometryElement::eByControlPoint:
switch (leUV->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
uv = leUV->GetDirectArray().GetAt(lControlPointIndex);
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = leUV->GetIndexArray().GetAt(lControlPointIndex);
uv = leUV->GetDirectArray().GetAt(id);
}
break;
default:
break; // other reference modes not shown here!
}
break;
case FbxGeometryElement::eByPolygonVertex:
{
int lTextureUVIndex = pMesh->GetTextureUVIndex(i, j);
switch (leUV->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
case FbxGeometryElement::eIndexToDirect:
{
uv = leUV->GetDirectArray().GetAt(lTextureUVIndex);
}
break;
default:
break; // other reference modes not shown here!
}
}
break;
case FbxGeometryElement::eByPolygon: // doesn't make much sense for UVs
case FbxGeometryElement::eAllSame: // doesn't make much sense for UVs
case FbxGeometryElement::eNone: // doesn't make much sense for UVs
break;
}
auto& texcoord = kMesh.m_kTexcoords[k][u32Index];
texcoord.x = (float)uv[0];
texcoord.y = (float)uv[1];
}
for (int k(0); k < (int)(kMesh.m_kNormals.size()); ++k)
{
FbxVector4 n;
FbxGeometryElementNormal* leNormal = pMesh->GetElementNormal(k);
if (leNormal->GetMappingMode() == FbxGeometryElement::eByPolygonVertex)
{
switch (leNormal->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
n = leNormal->GetDirectArray().GetAt(u32Index);
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = leNormal->GetIndexArray().GetAt(u32Index);
n = leNormal->GetDirectArray().GetAt(id);
}
break;
default:
break; // other reference modes not shown here!
}
}
auto& normal = kMesh.m_kNormals[k][u32Index];
normal.x = (float)n[0];
normal.y = (float)n[1];
normal.z = (float)n[2];
}
if (element_mat >= 0)
{
FbxGeometryElementMaterial* lMaterialElement = pMesh->GetElementMaterial(element_mat);
FbxSurfaceMaterial* lMaterial = NULL;
int lMatId = -1;
lMaterial = pMesh->GetNode()->GetMaterial(lMaterialElement->GetIndexArray().GetAt(i));
lMatId = lMaterialElement->GetIndexArray().GetAt(i);
kMesh.m_kAttributes[i] = lMatId;
}
}
}
kMesh.Process();
kMesh.Save(spDest);
}
void ReadColor(FbxMesh* pMesh , int ctrlPointIndex , int vertexCounter , D3DXVECTOR4* pColor)
{
if(pMesh->GetElementVertexColorCount() < 1)
{
return;
}
FbxGeometryElementVertexColor* pVertexColor = pMesh->GetElementVertexColor(0);
switch(pVertexColor->GetMappingMode())
{
case FbxGeometryElement::eByControlPoint:
{
switch(pVertexColor->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
{
pColor->x = pVertexColor->GetDirectArray().GetAt(ctrlPointIndex).mRed;
pColor->y = pVertexColor->GetDirectArray().GetAt(ctrlPointIndex).mGreen;
pColor->z = pVertexColor->GetDirectArray().GetAt(ctrlPointIndex).mBlue;
pColor->w = pVertexColor->GetDirectArray().GetAt(ctrlPointIndex).mAlpha;
}
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = pVertexColor->GetIndexArray().GetAt(ctrlPointIndex);
pColor->x = pVertexColor->GetDirectArray().GetAt(id).mRed;
pColor->y = pVertexColor->GetDirectArray().GetAt(id).mGreen;
pColor->z = pVertexColor->GetDirectArray().GetAt(id).mBlue;
pColor->w = pVertexColor->GetDirectArray().GetAt(id).mAlpha;
}
break;
default:
break;
}
}
break;
case FbxGeometryElement::eByPolygonVertex:
{
switch (pVertexColor->GetReferenceMode())
{
case FbxGeometryElement::eDirect:
{
pColor->x = pVertexColor->GetDirectArray().GetAt(vertexCounter).mRed;
pColor->y = pVertexColor->GetDirectArray().GetAt(vertexCounter).mGreen;
pColor->z = pVertexColor->GetDirectArray().GetAt(vertexCounter).mBlue;
pColor->w = pVertexColor->GetDirectArray().GetAt(vertexCounter).mAlpha;
}
break;
case FbxGeometryElement::eIndexToDirect:
{
int id = pVertexColor->GetIndexArray().GetAt(vertexCounter);
pColor->x = pVertexColor->GetDirectArray().GetAt(id).mRed;
pColor->y = pVertexColor->GetDirectArray().GetAt(id).mGreen;
pColor->z = pVertexColor->GetDirectArray().GetAt(id).mBlue;
pColor->w = pVertexColor->GetDirectArray().GetAt(id).mAlpha;
}
break;
default:
break;
}
}
break;
}
}