/* Test insert/update/select (but not setting/getting any lock info) on a table that supports locking. */
void BasicUpdateTests::update_on_lock_enabled_table ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaSample(), ArcSDETestConfig::ClassNameSample(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoStringValue> expression = FdoStringValue::Create (L"Zozo");
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (AdjustRdbmsName(L"LockProperty"), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
FdoInt32 newId = 0;
if (reader->ReadNext())
newId = reader->GetInt32(AdjustRdbmsName(L"Id"));
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", AdjustRdbmsName(L"Id"), newId);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (AdjustRdbmsName(L"LockProperty"));
value->SetValue (L"'All mimsy were the borogoves'");
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameSample());
reader = select->Execute ();
while (reader->ReadNext ())
{
CPPUNIT_ASSERT_MESSAGE ("incorrect value", 0 == wcscmp (L"All mimsy were the borogoves", reader->GetString (AdjustRdbmsName(L"LockProperty"))));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameSample(), true);
mConnection->Close();
}
catch (FdoException* ge)
{
fail (ge);
}
}
int MgdUpdateFeaturesCommand::ExecuteUpdate(MgResourceIdentifier* resource, CREFSTRING className, MgPropertyCollection* propertyValues, CREFSTRING filter, MgTransaction* trans)
{
int updated = 0;
MG_FEATURE_SERVICE_TRY()
CHECK_FEATURE_SOURCE_ARGUMENT(resource, L"MgdUpdateFeaturesCommand::ExecuteUpdate");
CHECKARGUMENTNULL(propertyValues, L"MgdUpdateFeaturesCommand::ExecuteUpdate");
if (className.empty())
throw new MgNullArgumentException(L"MgdUpdateFeaturesCommand::ExecuteUpdate", __LINE__, __WFILE__, NULL, L"", NULL);
Ptr<MgdFeatureConnection> connWrap;
FdoPtr<FdoIConnection> conn;
FdoPtr<FdoITransaction> fdoTrans;
Ptr<MgdTransaction> mgTrans = dynamic_cast<MgdTransaction*>(trans);
if (NULL != mgTrans)
{
SAFE_ADDREF(mgTrans.p);
Ptr<MgResourceIdentifier> origFeatureSource = mgTrans->GetFeatureSource();
//Check that the transaction originates from the same feature source
if (origFeatureSource->ToString() != resource->ToString())
throw new MgInvalidArgumentException(L"MgdUpdateFeaturesCommand::ExecuteUpdate", __LINE__, __WFILE__, NULL, L"", NULL);
connWrap = mgTrans->GetConnection(); //Connection is already open
fdoTrans = mgTrans->GetFdoTransaction();
}
else
{
connWrap = new MgdFeatureConnection(resource);
}
conn = connWrap->GetConnection();
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)conn->CreateCommand(FdoCommandType_Update);
update->SetFeatureClassName(className.c_str());
if (!filter.empty())
update->SetFilter(filter.c_str());
if (NULL != fdoTrans.p)
update->SetTransaction(fdoTrans);
FdoPtr<FdoPropertyValueCollection> propVals = update->GetPropertyValues();
for (INT32 i = 0; i < propertyValues->GetCount(); i++)
{
Ptr<MgProperty> mgp = propertyValues->GetItem(i);
FdoPtr<FdoPropertyValue> pv = MgdFeatureUtil::MgPropertyToFdoProperty(mgp);
propVals->Add(pv);
}
updated = update->Execute();
MG_FEATURE_SERVICE_CATCH_AND_THROW_WITH_FEATURE_SOURCE(L"MgdUpdateFeaturesCommand::ExecuteUpdate", resource)
return updated;
}
void MySqlFdoInsertTest::charSetTestTable( FdoIConnection* connection, FdoString* charSet, FdoString* dataCharSet, FdoString* stringVal, FdoString* charVal )
{
FdoStringP className = FdoStringP::Format( L"%ls_%ls", charSet, dataCharSet );
FdoPtr<FdoIInsert> insertCommand = (FdoIInsert *) connection->CreateCommand(FdoCommandType_Insert);
FdoPtr<FdoPropertyValueCollection> propertyValues;
FdoPtr<FdoDataValue> dataValue;
FdoPtr<FdoPropertyValue> propertyValue;
insertCommand->SetFeatureClassName(className);
propertyValues = insertCommand->GetPropertyValues();
propertyValue = FdoPropertyValue::Create();
propertyValue->SetName( L"data" );
propertyValues->Add( propertyValue );
dataValue = FdoDataValue::Create(stringVal);
propertyValue->SetValue(dataValue);
propertyValue = FdoPropertyValue::Create();
propertyValue->SetName( L"chardata" );
propertyValues->Add( propertyValue );
dataValue = FdoDataValue::Create(charVal);
propertyValue->SetValue(dataValue);
FdoPtr<FdoIFeatureReader>rdr = insertCommand->Execute();
FdoPtr<FdoISelect>selCmd = (FdoISelect*)connection->CreateCommand( FdoCommandType_Select );
selCmd->SetFeatureClassName(className);
FdoPtr<FdoIFeatureReader>myReader = selCmd->Execute();
CPPUNIT_ASSERT( myReader->ReadNext() );
charSetVldValue( className, stringVal, myReader->GetString(L"data") );
charSetVldValue( className, charVal, myReader->GetString(L"chardata") );
CPPUNIT_ASSERT( !(myReader->ReadNext()) );
}
MgPropertyCollection* MgdUpdateFeaturesCommand::ExecuteInsert(MgResourceIdentifier* resource, CREFSTRING className, MgBatchPropertyCollection* batchPropertyValues, MgTransaction* trans)
{
Ptr<MgPropertyCollection> ret;
MG_FEATURE_SERVICE_TRY()
CHECK_FEATURE_SOURCE_ARGUMENT(resource, L"MgdUpdateFeaturesCommand::ExecuteInsert");
CHECKARGUMENTNULL(batchPropertyValues, L"MgdUpdateFeaturesCommand::ExecuteInsert");
if (className.empty())
throw new MgNullArgumentException(L"MgdUpdateFeaturesCommand::ExecuteInsert", __LINE__, __WFILE__, NULL, L"", NULL);
ret = new MgPropertyCollection();
Ptr<MgdFeatureConnection> connWrap;
FdoPtr<FdoIConnection> conn;
FdoPtr<FdoITransaction> fdoTrans;
Ptr<MgdTransaction> mgTrans = dynamic_cast<MgdTransaction*>(trans);
if (NULL != mgTrans)
{
SAFE_ADDREF(mgTrans.p);
Ptr<MgResourceIdentifier> origFeatureSource = mgTrans->GetFeatureSource();
//Check that the transaction originates from the same feature source
if (origFeatureSource->ToString() != resource->ToString())
throw new MgInvalidArgumentException(L"MgdUpdateFeaturesCommand::ExecuteInsert", __LINE__, __WFILE__, NULL, L"", NULL);
connWrap = mgTrans->GetConnection(); //Connection is already open
fdoTrans = mgTrans->GetFdoTransaction();
}
else
{
connWrap = new MgdFeatureConnection(resource);
}
conn = connWrap->GetConnection();
FdoPtr<FdoIInsert> insert = (FdoIInsert*)conn->CreateCommand(FdoCommandType_Insert);
insert->SetFeatureClassName(className.c_str());
FdoPtr<FdoPropertyValueCollection> propVals = insert->GetPropertyValues();
if (NULL != fdoTrans.p)
insert->SetTransaction(fdoTrans);
//TODO: Support batch parameters, the main beneficiary of this API. Even then,
//the value flipping approach employed here has performance benefits for certain
//providers, like SQLite
for (INT32 i = 0; i < batchPropertyValues->GetCount(); i++)
{
Ptr<MgPropertyCollection> propertyValues = batchPropertyValues->GetItem(i);
//First feature, set up the FDO property value collection
if (i == 0)
{
for (INT32 i = 0; i < propertyValues->GetCount(); i++)
{
Ptr<MgProperty> mgp = propertyValues->GetItem(i);
FdoPtr<FdoPropertyValue> pv = MgdFeatureUtil::MgPropertyToFdoProperty(mgp);
propVals->Add(pv);
}
}
else //Feature after the first
{
//Set all to null
for (INT32 i = 0; i < propVals->GetCount(); i++)
{
FdoPtr<FdoPropertyValue> fp = propVals->GetItem(i);
FdoPtr<FdoValueExpression> expr = fp->GetValue();
FdoDataValue* fdv = dynamic_cast<FdoDataValue*>(expr.p);
FdoGeometryValue* fgv = dynamic_cast<FdoGeometryValue*>(expr.p);
if (fdv)
{
fdv->SetNull();
}
else if (fgv)
{
fgv->SetNullValue();
}
}
//Now set the appropriate values. MgdFeatureUtil does the work
for (INT32 i = 0; i < propertyValues->GetCount(); i++)
{
Ptr<MgNullableProperty> mgp = (MgNullableProperty*)propertyValues->GetItem(i);
if (!mgp->IsNull())
{
FdoPtr<FdoPropertyValue> fp = propVals->GetItem(mgp->GetName().c_str());
MgdFeatureUtil::UpdateFdoPropertyValue(fp, mgp);
}
}
}
STRING sIndex;
MgUtil::Int32ToString(i, sIndex);
//Insert and stash the result in the property collection
FdoPtr<FdoIFeatureReader> insertRes = insert->Execute();
Ptr<MgFeatureReader> fr = new MgdFeatureReader(connWrap, insertRes);
Ptr<MgFeatureProperty> fp = new MgFeatureProperty(sIndex, fr);
ret->Add(fp);
}
MG_FEATURE_SERVICE_CATCH_AND_THROW_WITH_FEATURE_SOURCE(L"MgdUpdateFeaturesCommand::ExecuteInsert", resource)
return ret.Detach();
}
void MySqlFdoInsertTest::insertBoundaryUnsigned()
{
StaticConnection* conn = new MySqlStaticConnection();
try {
UnitTestUtil::SetProvider( conn->GetServiceName() );
conn->connect();
FdoSchemaManagerP mgr = conn->CreateSchemaManager();
FdoSmPhMgrP phMgr = mgr->GetPhysicalSchema();
FdoStringP datastore = phMgr->GetDcOwnerName(
UnitTestUtil::GetEnviron("datastore", UNSIGNED_SUFFIX)
);
FdoSmPhDatabaseP database = phMgr->GetDatabase();
FdoSmPhOwnerP owner = phMgr->FindOwner( datastore, L"", false );
if ( owner ) {
owner->SetElementState( FdoSchemaElementState_Deleted );
owner->Commit();
}
owner = database->CreateOwner(
datastore,
false
);
owner->SetPassword( L"test" );
FdoStringP tableName = L"unsigned_test";
FdoSmPhTableP table = owner->CreateTable( tableName );
table->SetPkeyName( tableName + L"_key" );
FdoSmPhColumnP column = table->CreateColumnInt32(
L"id",
false
);
table->AddPkeyCol( column->GetName() );
column = table->CreateColumnUnknown(
L"uint_column",
L"int unsigned",
false,
0,
0
);
owner->Commit();
phMgr = NULL;
mgr = NULL;
conn->disconnect();
delete conn;
conn = NULL;
FdoPtr<FdoIConnection> connection = UnitTestUtil::GetConnection(UNSIGNED_SUFFIX, false);
FdoPtr<FdoITransaction> featureTransaction = connection->BeginTransaction();
FdoPtr<FdoIInsert> insertCommand = (FdoIInsert *) connection->CreateCommand(FdoCommandType_Insert);
insertCommand->SetFeatureClassName(tableName);
FdoPtr<FdoPropertyValueCollection> propertyValues = insertCommand->GetPropertyValues();
FdoPtr<FdoDataValue> dataValue;
dataValue = FdoDataValue::Create(L"1");
FdoPtr<FdoPropertyValue> propertyValue = AddNewProperty( propertyValues, L"id");
propertyValue->SetValue(dataValue);
dataValue = FdoDataValue::Create(L"0");
propertyValue = AddNewProperty( propertyValues, L"uint_column");
propertyValue->SetValue(dataValue);
FdoPtr<FdoIFeatureReader> reader = insertCommand->Execute();
dataValue = FdoDataValue::Create(L"2");
propertyValue = AddNewProperty( propertyValues, L"id");
propertyValue->SetValue(dataValue);
dataValue = FdoDataValue::Create(L"4294967295");
propertyValue = AddNewProperty( propertyValues, L"uint_column");
propertyValue->SetValue(dataValue);
reader = insertCommand->Execute();
featureTransaction->Commit();
// check
FdoPtr<FdoISelect> selectCmd = (FdoISelect *) connection->CreateCommand(FdoCommandType_Select);
selectCmd->SetFeatureClassName(tableName);
FdoPtr<FdoIFeatureReader> featureReader = selectCmd->Execute();
FdoInt32 rowCount = 0;
while ( featureReader->ReadNext() ) {
rowCount++;
switch ( featureReader->GetInt32(L"id") ) {
case 1:
CPPUNIT_ASSERT ( featureReader->GetInt64(L"uint_column") == 0 );
break;
case 2:
CPPUNIT_ASSERT ( featureReader->GetInt64(L"uint_column") == 4294967295LL);
break;
}
}
CPPUNIT_ASSERT( rowCount == 2 );
}
catch (FdoCommandException *ex)
{
if (conn)
{
conn->disconnect();
delete conn;
}
UnitTestUtil::FailOnException(ex);
}
catch (FdoException *ex)
{
if (conn)
{
conn->disconnect();
delete conn;
}
UnitTestUtil::FailOnException(ex);
}
}
void FdoSpatialContextTest::InsertFeatures( FdoIConnection* connection )
{
FdoPtr<FdoIInsert> insertCommand;
FdoPtr<FdoPropertyValueCollection> propertyValues;
FdoPtr<FdoDataValue> dataValue;
FdoPtr<FdoPropertyValue> propertyValue;
FdoPtr<FdoIFeatureReader> reader;
insertCommand = (FdoIInsert *) connection->CreateCommand(FdoCommandType_Insert);
insertCommand->SetFeatureClassName(L"ClassB1");
propertyValues = insertCommand->GetPropertyValues();
propertyValue;
double coordsBuffer[4];
int segCount = 2;
FdoPtr<FdoFgfGeometryFactory> gf = FdoFgfGeometryFactory::GetInstance();
coordsBuffer[0] = 2.1;
coordsBuffer[1] = 3.1;
coordsBuffer[2] = 4.1;
coordsBuffer[3] = 5.1;
FdoPtr<FdoILineString> line1 = gf->CreateLineString(FdoDimensionality_XY, segCount*2, coordsBuffer);
FdoPtr<FdoByteArray> byteArray = gf->GetFgf(line1);
FdoPtr<FdoGeometryValue> geometryValue = FdoGeometryValue::Create(byteArray);
propertyValue = FdoPropertyValue::Create(L"Geometry1", geometryValue);
propertyValues->Add(propertyValue);
coordsBuffer[0] += 0.1;
coordsBuffer[1] += 0.1;
coordsBuffer[2] += 0.1;
coordsBuffer[3] += 0.1;
line1 = gf->CreateLineString(FdoDimensionality_XY, segCount*2, coordsBuffer);
byteArray = gf->GetFgf(line1);
geometryValue = FdoGeometryValue::Create(byteArray);
propertyValue = FdoPropertyValue::Create(L"Geometry2", geometryValue);
propertyValues->Add(propertyValue);
coordsBuffer[0] += 0.1;
coordsBuffer[1] += 0.1;
coordsBuffer[2] += 0.1;
coordsBuffer[3] += 0.1;
line1 = gf->CreateLineString(FdoDimensionality_XY, segCount*2, coordsBuffer);
byteArray = gf->GetFgf(line1);
geometryValue = FdoGeometryValue::Create(byteArray);
propertyValue = FdoPropertyValue::Create(L"Geometry3", geometryValue);
propertyValues->Add(propertyValue);
coordsBuffer[0] += 0.1;
coordsBuffer[1] += 0.1;
coordsBuffer[2] += 0.1;
coordsBuffer[3] += 0.1;
line1 = gf->CreateLineString(FdoDimensionality_XY, segCount*2, coordsBuffer);
byteArray = gf->GetFgf(line1);
geometryValue = FdoGeometryValue::Create(byteArray);
propertyValue = FdoPropertyValue::Create(L"Geometry4", geometryValue);
propertyValues->Add(propertyValue);
coordsBuffer[0] += 0.1;
coordsBuffer[1] += 0.1;
coordsBuffer[2] += 0.1;
coordsBuffer[3] += 0.1;
line1 = gf->CreateLineString(FdoDimensionality_XY, segCount*2, coordsBuffer);
byteArray = gf->GetFgf(line1);
geometryValue = FdoGeometryValue::Create(byteArray);
propertyValue = FdoPropertyValue::Create(L"Geometry5", geometryValue);
propertyValues->Add(propertyValue);
reader = insertCommand->Execute();
}
/* Test basic update operation. */
void BasicUpdateTests::simple_update ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameTestClassSimple(), true);
// insert a feature
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5108.8 5104.7, 5109 5104, 5109 5105, 5108.8 5104.7))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id;
while (reader->ReadNext ())
id = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// update it
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
FdoPtr<FdoPropertyValueCollection> propertyValues = update->GetPropertyValues();
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", (FdoString*)GetIdPropName(), id);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (Data[0]->mPropertyName);
//FdoPtr<FdoStringValue> _string = static_cast<FdoStringValue*>(value->GetValue ());
//_string->SetNull ();
value->SetValue (L"'All mimsy were the borogoves'");
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassSimple());
reader = select->Execute ();
while (reader->ReadNext ())
{
CPPUNIT_ASSERT_MESSAGE ("incorrect value", 0 == wcscmp (L"All mimsy were the borogoves", reader->GetString (Data[0]->mPropertyName)));
// check geometry was not affected
FdoPtr<FdoGeometryValue> geometry = (FdoGeometryValue*)FDO_SAFE_ADDREF(expression.p);
FdoPtr<FdoByteArray> fetched = reader->GetGeometry ((FdoString*)GetGeomPropName());
FdoString* geometryText = geometry->ToString();
FdoPtr<FdoGeometryValue> fetchedGeom = FdoGeometryValue::Create (fetched);
FdoString* fetchedText = fetchedGeom->ToString ();
CPPUNIT_ASSERT_MESSAGE ("incorrect geometry value", 0==wcscmp(geometryText, fetchedText));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassSimple(), ArcSDETestConfig::ClassNameTestClassSimple(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test insert/update/select on a table that has a UUID column. */
void BasicUpdateTests::update_uuid ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcov());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassUuid(), ArcSDETestConfig::ClassNameTestClassUuid(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoStringValue> expression = FdoStringValue::Create (L"Added");
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (AdjustRdbmsName(L"MYSTRING"), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
expression->SetString(L"Updated");
reader = insert->Execute ();
expression->SetString(L"Deleted");
reader = insert->Execute ();
FdoStringP addedUuid1;
FdoStringP updatedUuid1;
FdoStringP deletedUuid;
FdoStringP updatedUuid2 = L"{ABCDEFGH-IJKL-MNOP-QRST-UVWXYZ123456}";
FdoStringP addedUuid3;
FdoStringP updatedUuid3;
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
reader = select->Execute ();
while (reader->ReadNext ())
{
FdoStringP myString = reader->GetString(AdjustRdbmsName(L"MYSTRING"));
if ( myString == L"Added" )
addedUuid1 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Updated" )
updatedUuid1 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Deleted" )
deletedUuid = reader->GetString(AdjustRdbmsName(L"ID"));
}
reader->Close();
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
FdoStringP filter = FdoStringP::Format( L"%ls = '%ls'", (FdoString*) AdjustRdbmsName(L"ID"), (FdoString*) updatedUuid1 );
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
value = FdoPropertyValue::Create ();
value->SetName (AdjustRdbmsName(L"ID"));
expression = FdoStringValue::Create (updatedUuid2);
value->SetValue (expression);
values->Add (value);
bool updateFailed = false;
// ID is readonly so update should fail.
try
{
update->Execute ();
}
catch ( FdoException* ex )
{
ex->Release();
updateFailed = true;
}
CPPUNIT_ASSERT ("update failed");
FdoPtr<FdoIDelete> dlte = (FdoIDelete*)mConnection->CreateCommand (FdoCommandType_Delete);
dlte->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
filter = FdoStringP::Format( L"%ls = '%ls'", (FdoString*) AdjustRdbmsName(L"ID"), (FdoString*) deletedUuid );
dlte->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
if (1 != dlte->Execute ())
CPPUNIT_FAIL ("delete execute failed");
// check by doing a select
select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassUuid());
reader = select->Execute ();
int count = 0;
while (reader->ReadNext ())
{
count++;
FdoStringP myString = reader->GetString(AdjustRdbmsName(L"MYSTRING"));
if ( myString == L"Added" )
addedUuid3 = reader->GetString(AdjustRdbmsName(L"ID"));
else if ( myString == L"Updated" )
updatedUuid3 = reader->GetString(AdjustRdbmsName(L"ID"));
}
reader->Close();
CPPUNIT_ASSERT( count == 2 );
CPPUNIT_ASSERT( addedUuid3 == addedUuid1 );
CPPUNIT_ASSERT( updatedUuid3 == updatedUuid1 );
CPPUNIT_ASSERT( updatedUuid3 != updatedUuid2 );
mConnection->Close();
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test spatial filter. */
void BasicUpdateTests::spatial_filter ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5010.282 5011.717, 5010.4 5011.7, 5010.4 5011.3, 5010.282 5011.717))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id1;
while (reader->ReadNext ())
id1 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'John Smith'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5000.919 5000.277, 5000.5 5000.2, 5000.5 5000.7, 5000.919 5000.277))')");
value->SetValue (expression);
reader = insert->Execute ();
int id2;
while (reader->ReadNext ())
id2 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Mott the Hoople'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5014.262 5015.018, 5014.3 5015.9, 5014.9 5015.9, 5014.262 5015.018))')");
value->SetValue (expression);
reader = insert->Execute ();
int id3;
while (reader->ReadNext ())
id3 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// do a spatial filtered update
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (L"SHAPE INTERSECTS GEOMFROMTEXT ('POLYGON XY (( 5012 5012, 5020 5012, 5020 5016, 5012 5016, 5012 5012 ))')")));
values = update->GetPropertyValues ();
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Alice in Wonderland'");
value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = select->Execute ();
int id;
while (reader->ReadNext ())
{
id = reader->GetInt32 ((FdoString*)GetIdPropName());
FdoString* item = reader->GetString (Data[0]->mPropertyName);
if (id == id3)
CPPUNIT_ASSERT_MESSAGE ("value not changed", 0 == wcscmp (item, L"Alice in Wonderland"));
else
CPPUNIT_ASSERT_MESSAGE ("value mistakenly changed", 0 != wcscmp (item, L"Alice in Wonderland"));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test geometry update operation. */
void BasicUpdateTests::geometry_update ()
{
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
FdoPtr<FdoPropertyValueCollection> values = insert->GetPropertyValues ();
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)FdoExpression::Parse (Data[0]->mPropertyData[0]);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[0]->mPropertyName, expression);
values->Add (value);
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5010.282 5011.717, 5011 5012, 5013 5012, 5010.282 5011.717))')");
FdoPtr<FdoPropertyValue> geometry = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (geometry);
FdoPtr<FdoIFeatureReader> reader = insert->Execute ();
int id;
while (reader->ReadNext ())
id = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'John Smith'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5000.919 5000.277, 5005 5000, 5005 5005, 5000.919 5000.277))')");
value->SetValue (expression);
reader = insert->Execute ();
int id2;
while (reader->ReadNext ())
id2 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
value = values->GetItem (Data[0]->mPropertyName);
expression = (FdoValueExpression*)FdoExpression::Parse (L"'Mott the Hoople'");
value->SetValue (expression);
value = values->GetItem ((FdoString*)GetGeomPropName());
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5014.262 5000.018, 5015 5005, 5016 5010, 5014.262 5000.018))')");
value->SetValue (expression);
reader = insert->Execute ();
int id3;
while (reader->ReadNext ())
id3 = reader->GetInt32 ((FdoString*)GetIdPropName());
reader->Close();
// update it
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
FdoPtr<FdoPropertyValueCollection> propertyValues = update->GetPropertyValues();
wchar_t filter[1024];
FdoCommonOSUtil::swprintf(filter, ELEMENTS(filter), L"%ls = %d", (FdoString*)GetIdPropName(), id);
FdoPtr<FdoFilter> fdoFilter = FdoFilter::Parse (filter);
update->SetFilter (fdoFilter);
values = update->GetPropertyValues ();
expression = (FdoValueExpression*)FdoExpression::Parse (L"GeomFromText('POLYGON XY ((5008.8 5004.7, 5010 5010, 5000 5005, 5008.8 5004.7))')");
value = FdoPropertyValue::Create ((FdoString*)GetGeomPropName(), expression);
values->Add (value);
if (1 != update->Execute ())
CPPUNIT_FAIL ("update execute failed");
// check by doing a select
FdoPtr<FdoISelect> select = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
select->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
fdoFilter = FdoFilter::Parse (filter);
select->SetFilter (fdoFilter);
reader = select->Execute ();
while (reader->ReadNext ())
{
FdoPtr<FdoGeometryValue> geometry = FDO_SAFE_ADDREF((FdoGeometryValue*)expression.p);
FdoPtr<FdoByteArray> fetched = reader->GetGeometry ((FdoString*)GetGeomPropName());
FdoString* referenceText = geometry->ToString();
FdoPtr<FdoGeometryValue> fetchedGeom = FdoGeometryValue::Create (fetched);
const wchar_t* fetchedText = fetchedGeom->ToString ();
CPPUNIT_ASSERT_MESSAGE ("incorrect geometry value", 0==wcscmp(referenceText, fetchedText));
}
reader->Close();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
/* Test all data types update operation. */
void BasicUpdateTests::full_update ()
{
int iRow = 0;
FdoPtr<FdoPropertyValueCollection> values;
FdoPtr<FdoISelect> selectCmd;
FdoPtr<FdoIFeatureReader> reader;
if (CreateSchemaOnly()) return;
try
{
mConnection = ArcSDETests::GetConnection ();
mConnection->SetConnectionString (ArcSDETestConfig::ConnStringMetadcovSingleDb());
mConnection->Open ();
// Clean up previous tests:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
// Insert 2 rows of data:
while (iRow<=1)
{
FdoPtr<FdoIInsert> insert = (FdoIInsert*)mConnection->CreateCommand (FdoCommandType_Insert);
insert->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
values = insert->GetPropertyValues ();
for (int i = 0; i < PropertyCount; i++)
{
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create ();
value->SetName (Data[i]->mPropertyName);
FdoPtr<FdoValueExpression> expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[i]->mPropertyData[iRow], Data[i]->mPropertyType);
value->SetValue (expression);
values->Add (value);
}
reader = insert->Execute ();
// none returned: reader->Close ();
iRow++;
}
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
FdoInt32 iSelectedRow = 0;
while (reader->ReadNext ())
{
// NOTE: we're assuming we receive the rows in the same order we inserted them
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iSelectedRow]);
iSelectedRow++;
}
reader->Close ();
// Update both rows, providing several values in the *reverse* order as class properties appear:
FdoPtr<FdoIUpdate> update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
wchar_t filter[1024];
wcscpy (filter, Data[3]->mPropertyName);
wcscat (filter, L" = ");
wcscat (filter, Data[3]->mPropertyData[0]);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
for (int iPropertyIndex = 0; iPropertyIndex < PropertyCount; iPropertyIndex++)
{
int iDataIndex = (PropertyCount - 1) - iPropertyIndex;
FdoPtr<FdoValueExpression> expression;
expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[iDataIndex]->mPropertyData[iRow], Data[iDataIndex]->mPropertyType);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[iDataIndex]->mPropertyName, expression);
values->Add (value);
}
FdoInt32 iUpdatedRows = update->Execute ();
//NOTE: iUpdatedRows is currently always 1, regardless of the # of rows actually affected.
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
while (reader->ReadNext ())
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iRow]);
reader->Close ();
iRow++;
// Update both rows, providing *mostly NULL value* in the *same* order as class properties appear:
update = (FdoIUpdate*)mConnection->CreateCommand (FdoCommandType_Update);
update->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex()); // misnomer, it's not a feature class
wcscpy (filter, Data[3]->mPropertyName);
wcscat (filter, L" = ");
wcscat (filter, Data[3]->mPropertyData[iRow-1]);
update->SetFilter (FdoPtr<FdoFilter>(FdoFilter::Parse (filter)));
values = update->GetPropertyValues ();
for (int i = 0; i < PropertyCount; i++)
{
FdoPtr<FdoValueExpression> expression;
expression = (FdoValueExpression*)ArcSDETests::ParseByDataType (Data[i]->mPropertyData[iRow], Data[i]->mPropertyType);
FdoPtr<FdoPropertyValue> value = FdoPropertyValue::Create (Data[i]->mPropertyName, expression);
value->SetValue (expression);
values->Add (value);
}
iUpdatedRows = update->Execute ();
//NOTE: iUpdatedRows is currently always 1, regardless of the # of rows actually affected.
// check by doing a select
selectCmd = (FdoISelect*)mConnection->CreateCommand (FdoCommandType_Select);
selectCmd->SetFeatureClassName (ArcSDETestConfig::QClassNameTestClassComplex());
reader = selectCmd->Execute ();
while (reader->ReadNext ())
for (int i = 0; i < PropertyCount; i++)
checkEqual(reader, Data[i]->mPropertyName, Data[i]->mPropertyType, Data[i]->mPropertyData[iRow]);
reader->Close ();
// Clean up after test:
CleanUpClass(mConnection, ArcSDETestConfig::ClassSchemaTestClassComplex(), ArcSDETestConfig::ClassNameTestClassComplex(), true);
}
catch (FdoException* ge)
{
fail (ge);
}
}
