예제 #1
0
PortList::PortList(const HVACComponent& comp)
  : ModelObject(PortList::iddObjectType(),comp.model())
{
  OS_ASSERT(getImpl<detail::PortList_Impl>());

  getImpl<detail::PortList_Impl>()->setHVACComponent(comp);
}
예제 #2
0
  bool HVACComponent_Impl::addToNode(Node & node, 
    const HVACComponent & systemStartComponent, 
    const HVACComponent & systemEndComponent,
    unsigned componentInletPort,
    unsigned componentOutletPort)
  {
    Model _model = model();
    ModelObject thisModelObject = getObject<ModelObject>();

    if( node.model() != _model ) return false;
    if( systemStartComponent.model() != _model ) return false;
    if( systemEndComponent.model() != _model ) return false;

    if( (node == systemEndComponent) && (node.inletModelObject().get() == systemStartComponent) ) {
      unsigned oldOutletPort = node.connectedObjectPort( node.inletPort() ).get();
      unsigned oldInletPort = node.inletPort();
      ModelObject oldSourceModelObject = node.connectedObject( node.inletPort() ).get();
      ModelObject oldTargetModelObject = node;

      // If systemStartComponent is not a node we need to insert one so that there
      // is a node between systemStartComponent and this component we are adding
      // This situation occurs in the oa system relief stream.
      if( ! systemStartComponent.optionalCast<Node>() ) {
        Node newNode(_model);
        _model.connect(oldSourceModelObject,oldOutletPort,
                       newNode,newNode.inletPort());
        oldOutletPort = newNode.outletPort();
        oldSourceModelObject = newNode;
      }

      _model.connect( oldSourceModelObject, oldOutletPort,
                      thisModelObject, componentInletPort );
      _model.connect( thisModelObject, componentOutletPort,
                      oldTargetModelObject, oldInletPort );
      return true;
    } else if( (node == systemStartComponent) && (node.outletModelObject().get() == systemEndComponent) ) {
      unsigned oldInletPort = node.connectedObjectPort( node.outletPort() ).get();
      unsigned oldOutletPort = node.outletPort();
      ModelObject oldTargetModelObject = node.connectedObject( node.outletPort() ).get();
      ModelObject oldSourceModelObject = node;

      // If systemEndComponent is not a node we need to insert one so that there
      // is a node between systemEndComponent and this component we are adding
      // This situation occurs in the oa system outdoor air stream.
      if( ! systemEndComponent.optionalCast<Node>() ) {
        Node newNode(_model);
        _model.connect(newNode,newNode.outletPort(),
                       oldTargetModelObject,oldInletPort);
        oldInletPort = newNode.inletPort();
        oldTargetModelObject = newNode;
      }

      _model.connect( oldSourceModelObject, oldOutletPort,
                      thisModelObject, componentInletPort );
      _model.connect( thisModelObject, componentOutletPort,
                      oldTargetModelObject, oldInletPort );
      return true;
    } else if( node == systemEndComponent ) {
      unsigned oldOutletPort = node.connectedObjectPort( node.inletPort() ).get();
      unsigned oldInletPort = node.inletPort();
      ModelObject oldSourceModelObject = node.connectedObject( node.inletPort() ).get();
      ModelObject oldTargetModelObject = node;

      Node newNode( _model );
      _model.connect( oldSourceModelObject, oldOutletPort,
                      newNode, newNode.inletPort() );
      _model.connect( newNode, newNode.outletPort(),
                      thisModelObject, componentInletPort );                        
      _model.connect( thisModelObject, componentOutletPort,
                      oldTargetModelObject, oldInletPort );
      return true;
    } else {
      unsigned oldOutletPort = node.outletPort();
      unsigned oldInletPort = node.connectedObjectPort( node.outletPort() ).get();
      ModelObject oldSourceModelObject = node;
      ModelObject oldTargetModelObject = node.connectedObject( node.outletPort() ).get();
    
      Node newNode( _model );
      _model.connect( oldSourceModelObject, oldOutletPort,
                      thisModelObject, componentInletPort );
      _model.connect( thisModelObject, componentOutletPort,
                      newNode, newNode.inletPort() );
      _model.connect( newNode, newNode.outletPort(),
                      oldTargetModelObject, oldInletPort );
      return true;
    }

    return false;
  }
예제 #3
0
  bool HVACComponent_Impl::removeFromLoop( const HVACComponent & systemStartComponent, 
    const HVACComponent & systemEndComponent,
    unsigned componentInletPort,
    unsigned componentOutletPort )
  {
    auto _model = model();
    auto thisObject = getObject<HVACComponent>();
    
    if( systemStartComponent.model() != _model ) return false;
    if( systemEndComponent.model() != _model ) return false;

    auto inletComponent = connectedObject( componentInletPort );
    auto outletComponent = connectedObject( componentOutletPort );
    auto inletComponentOutletPort = connectedObjectPort( componentInletPort );
    auto outletComponentInletPort = connectedObjectPort( componentOutletPort );

    if( ! inletComponent ) return false;
    if( ! outletComponent ) return false;
    if( ! inletComponentOutletPort ) return false;
    if( ! outletComponentInletPort ) return false;

    auto inletNode = inletComponent->optionalCast<Node>();
    auto outletNode = outletComponent->optionalCast<Node>();
    boost::optional<Splitter> splitter;
    boost::optional<Mixer> mixer;

    if( inletNode ) {
      if( auto mo = inletNode->inletModelObject() ) {
        splitter = mo->optionalCast<Splitter>();
      }
    }
    if( outletNode ) {
      if( auto mo = outletNode->outletModelObject() ) {
        mixer = mo->optionalCast<Mixer>();
      }
    }

    if( systemStartComponent.handle() == inletComponent->handle() 
        && systemEndComponent.handle() == outletComponent->handle() ) {
      // This component is between the systemStartComponent and the systemEndComponent
      // ie. the supply or demand inlet or outlet Nodes,
      // or the oa system end points on either the relief or inlet air streams.
      _model.disconnect(thisObject,componentInletPort); 
      _model.disconnect(thisObject,componentOutletPort); 

      _model.connect( inletComponent.get(), inletComponentOutletPort.get(), 
                       outletComponent.get(), outletComponentInletPort.get() );
      
      return true;
    } else if( systemEndComponent.handle() == outletComponent->handle() ) {
      // Here the systemEndComponent is immediately downstream of this component,
      // but there are other components (besides systemStartComponent) upstream.
      boost::optional<ModelObject> newInletComponent;
      boost::optional<unsigned> newInletComponentOutletPort;

      // Make sure we don't end up with two nodes next to each other after this component is removed
      if( inletNode && outletNode ) {
        newInletComponent = inletNode->inletModelObject();
        newInletComponentOutletPort = inletNode->connectedObjectPort(inletNode->inletPort());
        OS_ASSERT(newInletComponent);
        OS_ASSERT(newInletComponentOutletPort);
      } else {
        newInletComponent = inletComponent;
        newInletComponentOutletPort = inletComponentOutletPort;
      }

      _model.disconnect(thisObject,componentInletPort); 
      _model.disconnect(thisObject,componentOutletPort); 

      // inletNode->remove() would have failed if we did it before the disconnect
      if( inletNode && outletNode ) {
        inletNode->remove();
      }

      _model.connect( newInletComponent.get(), newInletComponentOutletPort.get(), 
                       outletComponent.get(), outletComponentInletPort.get() );
      return true;
    } else if( splitter && mixer ) {
      // If the component is the only component (except nodes) between a splitter mixer pair
      OS_ASSERT(inletNode);
      OS_ASSERT(outletNode);

      int i = splitter->branchIndexForOutletModelObject(inletNode.get());
      int j = mixer->branchIndexForInletModelObject(outletNode.get());

      OS_ASSERT(i == j);

      splitter->removePortForBranch(i);
      mixer->removePortForBranch(i);

      _model.disconnect(thisObject,componentInletPort); 
      _model.disconnect(thisObject,componentOutletPort); 

      inletNode->remove();
      outletNode->remove();

      if( ! splitter->lastOutletModelObject() )
      {
        Node newNode(_model);
        _model.connect(splitter.get(),splitter->nextOutletPort(),newNode,newNode.inletPort());
        _model.connect(newNode,newNode.outletPort(),mixer.get(),mixer->nextInletPort());
      }

      return true;
    } else {
      boost::optional<ModelObject> newOutletComponent; 
      boost::optional<unsigned> newOutletComponentInletPort;

      if( inletNode && outletNode ) {
        newOutletComponent = outletNode->outletModelObject();
        newOutletComponentInletPort = outletNode->connectedObjectPort(outletNode->outletPort());
      }

      if( ! newOutletComponent ) newOutletComponent = outletComponent;
      if( ! newOutletComponentInletPort ) newOutletComponentInletPort = outletComponentInletPort;

      _model.disconnect(thisObject,componentInletPort); 
      _model.disconnect(thisObject,componentOutletPort); 

      // outletNode->remove() would have failed if we did it before the disconnect
      if( inletNode && outletNode ) {
        outletNode->remove();
      }

      model().connect( inletComponent.get(), inletComponentOutletPort.get(), 
                       newOutletComponent.get(), newOutletComponentInletPort.get() );

      return true;
    }

    return false;
  }