static void
ContainerCleanupResources(Container* aContainer)
{
for (Layer* l = aContainer->GetFirstChild(); l; l = l->GetNextSibling()) {
LayerOGL* layerToRender = static_cast<LayerOGL*>(l->ImplData());
layerToRender->CleanupResources();
}
}
static void
ContainerRender(Container* aContainer,
int aPreviousFrameBuffer,
const nsIntPoint& aOffset,
LayerManagerOGL* aManager)
{
/**
* Setup our temporary texture for rendering the contents of this container.
*/
GLuint containerSurface;
GLuint frameBuffer;
nsIntPoint childOffset(aOffset);
nsIntRect visibleRect = aContainer->GetEffectiveVisibleRegion().GetBounds();
nsIntRect cachedScissor = aContainer->gl()->ScissorRect();
aContainer->gl()->PushScissorRect();
aContainer->mSupportsComponentAlphaChildren = false;
float opacity = aContainer->GetEffectiveOpacity();
const gfx3DMatrix& transform = aContainer->GetEffectiveTransform();
bool needsFramebuffer = aContainer->UseIntermediateSurface();
if (needsFramebuffer) {
nsIntRect framebufferRect = visibleRect;
// we're about to create a framebuffer backed by textures to use as an intermediate
// surface. What to do if its size (as given by framebufferRect) would exceed the
// maximum texture size supported by the GL? The present code chooses the compromise
// of just clamping the framebuffer's size to the max supported size.
// This gives us a lower resolution rendering of the intermediate surface (children layers).
// See bug 827170 for a discussion.
GLint maxTexSize;
aContainer->gl()->fGetIntegerv(LOCAL_GL_MAX_TEXTURE_SIZE, &maxTexSize);
framebufferRect.width = std::min(framebufferRect.width, maxTexSize);
framebufferRect.height = std::min(framebufferRect.height, maxTexSize);
LayerManagerOGL::InitMode mode = LayerManagerOGL::InitModeClear;
if (aContainer->GetEffectiveVisibleRegion().GetNumRects() == 1 &&
(aContainer->GetContentFlags() & Layer::CONTENT_OPAQUE))
{
// don't need a background, we're going to paint all opaque stuff
aContainer->mSupportsComponentAlphaChildren = true;
mode = LayerManagerOGL::InitModeNone;
} else {
const gfx3DMatrix& transform3D = aContainer->GetEffectiveTransform();
gfxMatrix transform;
// If we have an opaque ancestor layer, then we can be sure that
// all the pixels we draw into are either opaque already or will be
// covered by something opaque. Otherwise copying up the background is
// not safe.
if (HasOpaqueAncestorLayer(aContainer) &&
transform3D.Is2D(&transform) && !transform.HasNonIntegerTranslation()) {
mode = gfxPlatform::GetPlatform()->UsesSubpixelAATextRendering() ?
LayerManagerOGL::InitModeCopy :
LayerManagerOGL::InitModeClear;
framebufferRect.x += transform.x0;
framebufferRect.y += transform.y0;
aContainer->mSupportsComponentAlphaChildren = gfxPlatform::GetPlatform()->UsesSubpixelAATextRendering();
}
}
aContainer->gl()->PushViewportRect();
framebufferRect -= childOffset;
if (!aManager->CompositingDisabled()) {
aManager->CreateFBOWithTexture(framebufferRect,
mode,
aPreviousFrameBuffer,
&frameBuffer,
&containerSurface);
}
childOffset.x = visibleRect.x;
childOffset.y = visibleRect.y;
} else {
frameBuffer = aPreviousFrameBuffer;
aContainer->mSupportsComponentAlphaChildren = (aContainer->GetContentFlags() & Layer::CONTENT_OPAQUE) ||
(aContainer->GetParent() && aContainer->GetParent()->SupportsComponentAlphaChildren());
}
nsAutoTArray<Layer*, 12> children;
aContainer->SortChildrenBy3DZOrder(children);
/**
* Render this container's contents.
*/
for (uint32_t i = 0; i < children.Length(); i++) {
LayerOGL* layerToRender = static_cast<LayerOGL*>(children.ElementAt(i)->ImplData());
if (layerToRender->GetLayer()->GetEffectiveVisibleRegion().IsEmpty()) {
continue;
}
nsIntRect scissorRect = layerToRender->GetLayer()->
CalculateScissorRect(cachedScissor, &aManager->GetWorldTransform());
if (scissorRect.IsEmpty()) {
continue;
}
aContainer->gl()->fScissor(scissorRect.x,
scissorRect.y,
scissorRect.width,
scissorRect.height);
layerToRender->RenderLayer(frameBuffer, childOffset);
aContainer->gl()->MakeCurrent();
}
if (needsFramebuffer) {
// Unbind the current framebuffer and rebind the previous one.
#ifdef MOZ_DUMP_PAINTING
if (gfxUtils::sDumpPainting) {
nsRefPtr<gfxImageSurface> surf =
aContainer->gl()->GetTexImage(containerSurface, true, aManager->GetFBOLayerProgramType());
WriteSnapshotToDumpFile(aContainer, surf);
}
#endif
// Restore the viewport
aContainer->gl()->PopViewportRect();
nsIntRect viewport = aContainer->gl()->ViewportRect();
aManager->SetupPipeline(viewport.width, viewport.height,
LayerManagerOGL::ApplyWorldTransform);
aContainer->gl()->PopScissorRect();
aContainer->gl()->fBindFramebuffer(LOCAL_GL_FRAMEBUFFER, aPreviousFrameBuffer);
if (!aManager->CompositingDisabled()) {
aContainer->gl()->fDeleteFramebuffers(1, &frameBuffer);
aContainer->gl()->fActiveTexture(LOCAL_GL_TEXTURE0);
aContainer->gl()->fBindTexture(aManager->FBOTextureTarget(), containerSurface);
MaskType maskType = MaskNone;
if (aContainer->GetMaskLayer()) {
if (!aContainer->GetTransform().CanDraw2D()) {
maskType = Mask3d;
} else {
maskType = Mask2d;
}
}
ShaderProgramOGL *rgb =
aManager->GetFBOLayerProgram(maskType);
rgb->Activate();
rgb->SetLayerQuadRect(visibleRect);
rgb->SetLayerTransform(transform);
rgb->SetLayerOpacity(opacity);
rgb->SetRenderOffset(aOffset);
rgb->SetTextureUnit(0);
rgb->LoadMask(aContainer->GetMaskLayer());
if (rgb->GetTexCoordMultiplierUniformLocation() != -1) {
// 2DRect case, get the multiplier right for a sampler2DRect
rgb->SetTexCoordMultiplier(visibleRect.width, visibleRect.height);
}
// Drawing is always flipped, but when copying between surfaces we want to avoid
// this. Pass true for the flip parameter to introduce a second flip
// that cancels the other one out.
aManager->BindAndDrawQuad(rgb, true);
// Clean up resources. This also unbinds the texture.
aContainer->gl()->fDeleteTextures(1, &containerSurface);
}
} else {
aContainer->gl()->PopScissorRect();
}
}
bool
HwcComposer2D::PrepareLayerList(Layer* aLayer,
const nsIntRect& aClip,
const gfxMatrix& aParentTransform,
const gfxMatrix& aGLWorldTransform)
{
// NB: we fall off this path whenever there are container layers
// that require intermediate surfaces. That means all the
// GetEffective*() coordinates are relative to the framebuffer.
bool fillColor = false;
const nsIntRegion& visibleRegion = aLayer->GetEffectiveVisibleRegion();
if (visibleRegion.IsEmpty()) {
return true;
}
float opacity = aLayer->GetEffectiveOpacity();
if (opacity <= 0) {
LOGD("Layer is fully transparent so skip rendering");
return true;
}
else if (opacity < 1) {
LOGD("Layer has planar semitransparency which is unsupported");
return false;
}
if (visibleRegion.GetNumRects() > 1) {
// FIXME/bug 808339
LOGD("Layer has nontrivial visible region");
return false;
}
nsIntRect clip;
if (!CalculateClipRect(aParentTransform * aGLWorldTransform,
aLayer->GetEffectiveClipRect(),
aClip,
&clip))
{
LOGD("Clip rect is empty. Skip layer");
return true;
}
gfxMatrix transform;
const gfx3DMatrix& transform3D = aLayer->GetEffectiveTransform();
if (!transform3D.Is2D(&transform) || !transform.PreservesAxisAlignedRectangles()) {
LOGD("Layer has a 3D transform or a non-square angle rotation");
return false;
}
if (ContainerLayer* container = aLayer->AsContainerLayer()) {
if (container->UseIntermediateSurface()) {
LOGD("Container layer needs intermediate surface");
return false;
}
nsAutoTArray<Layer*, 12> children;
container->SortChildrenBy3DZOrder(children);
for (uint32_t i = 0; i < children.Length(); i++) {
if (!PrepareLayerList(children[i], clip, transform, aGLWorldTransform)) {
return false;
}
}
return true;
}
LayerOGL* layerGL = static_cast<LayerOGL*>(aLayer->ImplData());
LayerRenderState state = layerGL->GetRenderState();
if (!state.mSurface ||
state.mSurface->type() != SurfaceDescriptor::TSurfaceDescriptorGralloc) {
if (aLayer->AsColorLayer() && mColorFill) {
fillColor = true;
} else {
LOGD("Layer doesn't have a gralloc buffer");
return false;
}
}
if (state.BufferRotated()) {
LOGD("Layer has a rotated buffer");
return false;
}
// OK! We can compose this layer with hwc.
int current = mList ? mList->numHwLayers : 0;
if (!mList || current >= mMaxLayerCount) {
if (!ReallocLayerList() || current >= mMaxLayerCount) {
LOGE("PrepareLayerList failed! Could not increase the maximum layer count");
return false;
}
}
sp<GraphicBuffer> buffer = fillColor ? nullptr : GrallocBufferActor::GetFrom(*state.mSurface);
nsIntRect visibleRect = visibleRegion.GetBounds();
nsIntRect bufferRect;
if (fillColor) {
bufferRect = nsIntRect(visibleRect);
} else {
if(state.mHasOwnOffset) {
bufferRect = nsIntRect(state.mOffset.x, state.mOffset.y,
int(buffer->getWidth()), int(buffer->getHeight()));
} else {
bufferRect = nsIntRect(visibleRect.x, visibleRect.y,
int(buffer->getWidth()), int(buffer->getHeight()));
}
}
hwc_layer_t& hwcLayer = mList->hwLayers[current];
if(!PrepareLayerRects(visibleRect,
transform * aGLWorldTransform,
clip,
bufferRect,
&(hwcLayer.sourceCrop),
&(hwcLayer.displayFrame)))
{
return true;
}
buffer_handle_t handle = fillColor ? nullptr : buffer->getNativeBuffer()->handle;
hwcLayer.handle = handle;
hwcLayer.flags = 0;
hwcLayer.hints = 0;
hwcLayer.blending = HWC_BLENDING_NONE;
hwcLayer.compositionType = HWC_USE_COPYBIT;
if (!fillColor) {
gfxMatrix rotation = transform * aGLWorldTransform;
// Compute fuzzy equal like PreservesAxisAlignedRectangles()
if (fabs(rotation.xx) < 1e-6) {
if (rotation.xy < 0) {
hwcLayer.transform = HWC_TRANSFORM_ROT_90;
LOGD("Layer buffer rotated 90 degrees");
} else {
hwcLayer.transform = HWC_TRANSFORM_ROT_270;
LOGD("Layer buffer rotated 270 degrees");
}
} else if (rotation.xx < 0) {
hwcLayer.transform = HWC_TRANSFORM_ROT_180;
LOGD("Layer buffer rotated 180 degrees");
} else {
hwcLayer.transform = 0;
}
hwcLayer.transform |= state.YFlipped() ? HWC_TRANSFORM_FLIP_V : 0;
hwc_region_t region;
region.numRects = 1;
region.rects = &(hwcLayer.displayFrame);
hwcLayer.visibleRegionScreen = region;
} else {
hwcLayer.flags |= HWC_COLOR_FILL;
ColorLayer* colorLayer = static_cast<ColorLayer*>(layerGL->GetLayer());
hwcLayer.transform = colorLayer->GetColor().Packed();
}
mList->numHwLayers++;
return true;
}