bool isLinear(const Cubic& cubic, int startIndex, int endIndex) { LineParameters lineParameters; lineParameters.cubicEndPoints(cubic, startIndex, endIndex); // FIXME: maybe it's possible to avoid this and compare non-normalized lineParameters.normalize(); double distance = lineParameters.controlPtDistance(cubic, 1); if (!approximately_zero(distance)) { return false; } distance = lineParameters.controlPtDistance(cubic, 2); return approximately_zero(distance); }
bool isLinear(const Quadratic& quad, int startIndex, int endIndex) { LineParameters lineParameters; lineParameters.quadEndPoints(quad, startIndex, endIndex); // FIXME: maybe it's possible to avoid this and compare non-normalized lineParameters.normalize(); double distance = lineParameters.controlPtDistance(quad); return approximately_zero(distance); }
void LineParameter_Test() { for (size_t index = firstLineParameterTest; index < tests_count; ++index) { LineParameters lineParameters; const Cubic& cubic = tests[index]; lineParameters.cubicEndPoints(cubic); double denormalizedDistance[2]; denormalizedDistance[0] = lineParameters.controlPtDistance(cubic, 1); denormalizedDistance[1] = lineParameters.controlPtDistance(cubic, 2); double normalSquared = lineParameters.normalSquared(); size_t inner; for (inner = 0; inner < 2; ++inner) { double distSq = denormalizedDistance[inner]; distSq *= distSq; double answersSq = answers[index][inner]; answersSq *= answersSq; if (AlmostEqualUlps(distSq, normalSquared * answersSq)) { continue; } SkDebugf("%s [%d,%d] denormalizedDistance:%g != answer:%g" " distSq:%g answerSq:%g normalSquared:%g\n", __FUNCTION__, (int)index, (int)inner, denormalizedDistance[inner], answers[index][inner], distSq, answersSq, normalSquared); } lineParameters.normalize(); double normalizedDistance[2]; normalizedDistance[0] = lineParameters.controlPtDistance(cubic, 1); normalizedDistance[1] = lineParameters.controlPtDistance(cubic, 2); for (inner = 0; inner < 2; ++inner) { if (AlmostEqualUlps(fabs(normalizedDistance[inner]), answers[index][inner])) { continue; } SkDebugf("%s [%d,%d] normalizedDistance:%1.10g != answer:%g\n", __FUNCTION__, (int)index, (int)inner, normalizedDistance[inner], answers[index][inner]); } } }
bool isLinear(const Cubic& cubic, int startIndex, int endIndex) { LineParameters lineParameters; lineParameters.cubicEndPoints(cubic, startIndex, endIndex); double normalSquared = lineParameters.normalSquared(); double distance[2]; // distance is not normalized int mask = other_two(startIndex, endIndex); int inner1 = startIndex ^ mask; int inner2 = endIndex ^ mask; lineParameters.controlPtDistance(cubic, inner1, inner2, distance); double limit = normalSquared; int index; for (index = 0; index < 2; ++index) { double distSq = distance[index]; distSq *= distSq; if (approximately_greater(distSq, limit)) { return false; } } return true; }
static int check_linear(const Cubic& cubic, Cubic& reduction, int minX, int maxX, int minY, int maxY) { int startIndex = 0; int endIndex = 3; while (cubic[startIndex].approximatelyEqual(cubic[endIndex])) { --endIndex; if (endIndex == 0) { printf("%s shouldn't get here if all four points are about equal", __FUNCTION__); assert(0); } } LineParameters lineParameters; lineParameters.cubicEndPoints(cubic, startIndex, endIndex); double normalSquared = lineParameters.normalSquared(); double distance[2]; // distance is not normalized int mask = other_two(startIndex, endIndex); int inner1 = startIndex ^ mask; int inner2 = endIndex ^ mask; lineParameters.controlPtDistance(cubic, inner1, inner2, distance); double limit = normalSquared * SquaredEpsilon; int index; for (index = 0; index < 2; ++index) { double distSq = distance[index]; distSq *= distSq; if (distSq > limit) { return 0; } } // four are colinear: return line formed by outside reduction[0] = cubic[0]; reduction[1] = cubic[3]; int sameSide1; int sameSide2; bool useX = cubic[maxX].x - cubic[minX].x >= cubic[maxY].y - cubic[minY].y; if (useX) { sameSide1 = sign(cubic[0].x - cubic[1].x) + sign(cubic[3].x - cubic[1].x); sameSide2 = sign(cubic[0].x - cubic[2].x) + sign(cubic[3].x - cubic[2].x); } else { sameSide1 = sign(cubic[0].y - cubic[1].y) + sign(cubic[3].y - cubic[1].y); sameSide2 = sign(cubic[0].y - cubic[2].y) + sign(cubic[3].y - cubic[2].y); } if (sameSide1 == sameSide2 && (sameSide1 & 3) != 2) { return 2; } double tValues[2]; int roots; if (useX) { roots = SkFindCubicExtrema(cubic[0].x, cubic[1].x, cubic[2].x, cubic[3].x, tValues); } else { roots = SkFindCubicExtrema(cubic[0].y, cubic[1].y, cubic[2].y, cubic[3].y, tValues); } for (index = 0; index < roots; ++index) { _Point extrema; extrema.x = interp_cubic_coords(&cubic[0].x, tValues[index]); extrema.y = interp_cubic_coords(&cubic[0].y, tValues[index]); // sameSide > 0 means mid is smaller than either [0] or [3], so replace smaller int replace; if (useX) { if (extrema.x < cubic[0].x ^ extrema.x < cubic[3].x) { continue; } replace = (extrema.x < cubic[0].x | extrema.x < cubic[3].x) ^ cubic[0].x < cubic[3].x; } else { if (extrema.y < cubic[0].y ^ extrema.y < cubic[3].y) { continue; } replace = (extrema.y < cubic[0].y | extrema.y < cubic[3].y) ^ cubic[0].y < cubic[3].y; } reduction[replace] = extrema; } return 2; }
// return false if unable to clip (e.g., unable to create implicit line) // caller should subdivide, or create degenerate if the values are too small bool bezier_clip(const Cubic& cubic1, const Cubic& cubic2, double& minT, double& maxT) { minT = 1; maxT = 0; // determine normalized implicit line equation for pt[0] to pt[3] // of the form ax + by + c = 0, where a*a + b*b == 1 // find the implicit line equation parameters LineParameters endLine; endLine.cubicEndPoints(cubic1); if (!endLine.normalize()) { printf("line cannot be normalized: need more code here\n"); return false; } double distance[2]; endLine.controlPtDistance(cubic1, distance); // find fat line double top = distance[0]; double bottom = distance[1]; if (top > bottom) { std::swap(top, bottom); } if (top * bottom >= 0) { const double scale = 3/4.0; // http://cagd.cs.byu.edu/~tom/papers/bezclip.pdf (13) if (top < 0) { top *= scale; bottom = 0; } else { top = 0; bottom *= scale; } } else { const double scale = 4/9.0; // http://cagd.cs.byu.edu/~tom/papers/bezclip.pdf (15) top *= scale; bottom *= scale; } // compute intersecting candidate distance Cubic distance2y; // points with X of (0, 1/3, 2/3, 1) endLine.cubicDistanceY(cubic2, distance2y); int flags = 0; if (approximately_lesser(distance2y[0].y, top)) { flags |= kFindTopMin; } else if (approximately_greater(distance2y[0].y, bottom)) { flags |= kFindBottomMin; } else { minT = 0; } if (approximately_lesser(distance2y[3].y, top)) { flags |= kFindTopMax; } else if (approximately_greater(distance2y[3].y, bottom)) { flags |= kFindBottomMax; } else { maxT = 1; } // Find the intersection of distance convex hull and fat line. char to_0[2]; char to_3[2]; bool do_1_2_edge = convex_x_hull(distance2y, to_0, to_3); x_at(distance2y[0], distance2y[to_0[0]], top, bottom, flags, minT, maxT); if (to_0[0] != to_0[1]) { x_at(distance2y[0], distance2y[to_0[1]], top, bottom, flags, minT, maxT); } x_at(distance2y[to_3[0]], distance2y[3], top, bottom, flags, minT, maxT); if (to_3[0] != to_3[1]) { x_at(distance2y[to_3[1]], distance2y[3], top, bottom, flags, minT, maxT); } if (do_1_2_edge) { x_at(distance2y[1], distance2y[2], top, bottom, flags, minT, maxT); } return minT < maxT; // returns false if distance shows no intersection }
// return false if unable to clip (e.g., unable to create implicit line) // caller should subdivide, or create degenerate if the values are too small bool bezier_clip(const Quadratic& q1, const Quadratic& q2, double& minT, double& maxT) { minT = 1; maxT = 0; // determine normalized implicit line equation for pt[0] to pt[3] // of the form ax + by + c = 0, where a*a + b*b == 1 // find the implicit line equation parameters LineParameters endLine; endLine.quadEndPoints(q1); if (!endLine.normalize()) { printf("line cannot be normalized: need more code here\n"); assert(0); return false; } double distance = endLine.controlPtDistance(q1); // find fat line double top = 0; double bottom = distance / 2; // http://students.cs.byu.edu/~tom/557/text/cic.pdf (7.6) if (top > bottom) { std::swap(top, bottom); } // compute intersecting candidate distance Quadratic distance2y; // points with X of (0, 1/2, 1) endLine.quadDistanceY(q2, distance2y); int flags = 0; if (approximately_lesser(distance2y[0].y, top)) { flags |= kFindTopMin; } else if (approximately_greater(distance2y[0].y, bottom)) { flags |= kFindBottomMin; } else { minT = 0; } if (approximately_lesser(distance2y[2].y, top)) { flags |= kFindTopMax; } else if (approximately_greater(distance2y[2].y, bottom)) { flags |= kFindBottomMax; } else { maxT = 1; } // Find the intersection of distance convex hull and fat line. int idx = 0; do { int next = idx + 1; if (next == 3) { next = 0; } x_at(distance2y[idx], distance2y[next], top, bottom, flags, minT, maxT); idx = next; } while (idx); #if DEBUG_BEZIER_CLIP _Rect r1, r2; r1.setBounds(q1); r2.setBounds(q2); _Point testPt = {0.487, 0.337}; if (r1.contains(testPt) && r2.contains(testPt)) { printf("%s q1=(%1.9g,%1.9g %1.9g,%1.9g %1.9g,%1.9g)" " q2=(%1.9g,%1.9g %1.9g,%1.9g %1.9g,%1.9g) minT=%1.9g maxT=%1.9g\n", __FUNCTION__, q1[0].x, q1[0].y, q1[1].x, q1[1].y, q1[2].x, q1[2].y, q2[0].x, q2[0].y, q2[1].x, q2[1].y, q2[2].x, q2[2].y, minT, maxT); } #endif return minT < maxT; // returns false if distance shows no intersection }