bool RecreateCmpFile( BOARD * aBrd, const wxString& aFullCmpFileName )
{
FILE* cmpFile;
cmpFile = wxFopen( aFullCmpFileName, wxT( "wt" ) );
if( cmpFile == NULL )
return false;
fprintf( cmpFile, "Cmp-Mod V01 Created by PcbNew date = %s\n", TO_UTF8( DateAndTime() ) );
MODULE* module = aBrd->m_Modules;
for( ; module != NULL; module = module->Next() )
{
fprintf( cmpFile, "\nBeginCmp\n" );
fprintf( cmpFile, "TimeStamp = %8.8lX\n", (unsigned long)module->GetTimeStamp() );
fprintf( cmpFile, "Path = %s\n", TO_UTF8( module->GetPath() ) );
fprintf( cmpFile, "Reference = %s;\n",
!module->GetReference().IsEmpty() ?
TO_UTF8( module->GetReference() ) : "[NoRef]" );
fprintf( cmpFile, "ValeurCmp = %s;\n",
!module->GetValue().IsEmpty() ?
TO_UTF8( module->GetValue() ) : "[NoVal]" );
fprintf( cmpFile, "IdModule = %s;\n", module->GetFPID().Format().c_str() );
fprintf( cmpFile, "EndCmp\n" );
}
fprintf( cmpFile, "\nEndListe\n" );
fclose( cmpFile );
return true;
}
void DIALOG_EXCHANGE_MODULE::init()
{
SetFocus();
m_CurrentFootprintFPID->AppendText( FROM_UTF8( m_currentModule->GetFPID().Format().c_str() ) );
m_NewFootprintFPID->AppendText( FROM_UTF8( m_currentModule->GetFPID().Format().c_str() ) );
m_CmpValue->AppendText( m_currentModule->GetValue() );
m_CmpReference->AppendText( m_currentModule->GetReference() );
m_Selection->SetString( 0, wxString::Format(
_( "Change footprint of '%s'" ),
GetChars( m_currentModule->GetReference() ) ) );
wxString fpname = m_CurrentFootprintFPID->GetValue().AfterLast( ':' );
if( fpname.IsEmpty() ) // Happens for old fp names
fpname = m_CurrentFootprintFPID->GetValue();
m_Selection->SetString( 1, wxString::Format(
_( "Change footprints '%s'" ),
GetChars( fpname.Left( 12 ) ) ) );
m_Selection->SetSelection( m_selectionMode );
// Enable/disable widgets:
wxCommandEvent event;
OnSelectionClicked( event );
}
/**
* Send a remote command to Eeschema via a socket,
* @param objectToSync = item to be located on schematic (module, pin or text)
* Commands are
* $PART: "reference" put cursor on component anchor
* $PART: "reference" $PAD: "pad number" put cursor on the component pin
* $PART: "reference" $REF: "reference" put cursor on the component ref
* $PART: "reference" $VAL: "value" put cursor on the component value
*/
void PCB_EDIT_FRAME::SendMessageToEESCHEMA( BOARD_ITEM* objectToSync )
{
char cmd[1024];
const char* text_key;
MODULE* module = NULL;
D_PAD* pad;
TEXTE_MODULE* text_mod;
wxString msg;
if( objectToSync == NULL )
return;
switch( objectToSync->Type() )
{
case PCB_MODULE_T:
module = (MODULE*) objectToSync;
sprintf( cmd, "$PART: \"%s\"", TO_UTF8( module->GetReference() ) );
break;
case PCB_PAD_T:
module = (MODULE*) objectToSync->GetParent();
pad = (D_PAD*) objectToSync;
msg = pad->GetPadName();
sprintf( cmd, "$PART: \"%s\" $PAD: \"%s\"",
TO_UTF8( module->GetReference() ),
TO_UTF8( msg ) );
break;
case PCB_MODULE_TEXT_T:
module = (MODULE*) objectToSync->GetParent();
text_mod = (TEXTE_MODULE*) objectToSync;
if( text_mod->GetType() == TEXTE_MODULE::TEXT_is_REFERENCE )
text_key = "$REF:";
else if( text_mod->GetType() == TEXTE_MODULE::TEXT_is_VALUE )
text_key = "$VAL:";
else
break;
sprintf( cmd, "$PART: \"%s\" %s \"%s\"",
TO_UTF8( module->GetReference() ),
text_key,
TO_UTF8( text_mod->GetText() ) );
break;
default:
break;
}
if( module )
{
SendCommand( MSG_TO_SCH, cmd );
}
}
MODULE* FOOTPRINT_EDIT_FRAME::SelectFootprint( BOARD* aPcb )
{
static wxString oldName; // Save name of last module selected.
wxString fpname;
wxString msg;
wxArrayString listnames;
MODULE* module = aPcb->m_Modules;
for( ; module; module = module->Next() )
listnames.Add( module->GetReference() );
msg.Printf( _( "Modules [%d items]" ), listnames.GetCount() );
wxArrayString headers;
headers.Add( _( "Module" ) );
std::vector<wxArrayString> itemsToDisplay;
// Conversion from wxArrayString to vector of ArrayString
for( unsigned i = 0; i < listnames.GetCount(); i++ )
{
wxArrayString item;
item.Add( listnames[i] );
itemsToDisplay.push_back( item );
}
EDA_LIST_DIALOG dlg( this, msg, headers, itemsToDisplay, wxEmptyString, NULL, SORT_LIST );
if( dlg.ShowModal() == wxID_OK )
fpname = dlg.GetTextSelection();
else
return NULL;
oldName = fpname;
module = aPcb->m_Modules;
for( ; module; module = module->Next() )
{
if( fpname == module->GetReference() )
break;
}
return module;
}
/*
* Creates a footprint position file
* aSide = 0 -> Back (bottom) side)
* aSide = 1 -> Front (top) side)
* aSide = 2 -> both sides
* if aFullFileName is empty, the file is not created, only the
* count of footprints to place is returned
*/
int PCB_EDIT_FRAME::DoGenFootprintsPositionFile( const wxString& aFullFileName,
bool aUnitsMM,
bool aForceSmdItems, int aSide )
{
MODULE* module;
char line[1024];
File_Place_Offset = GetAuxOrigin();
// Calculating the number of useful modules (CMS attribute, not VIRTUAL)
int moduleCount = 0;
for( module = GetBoard()->m_Modules; module; module = module->Next() )
{
if( aSide < 2 )
{
if( module->GetLayer() == B_Cu && aSide == 1)
continue;
if( module->GetLayer() == F_Cu && aSide == 0)
continue;
}
if( module->GetAttributes() & MOD_VIRTUAL )
{
DBG( printf( "skipping module %s because it's virtual\n",
TO_UTF8( module->GetReference() ) );)
continue;
}
void PCB_BASE_FRAME::DeletePad( D_PAD* aPad, bool aQuery )
{
if( aPad == NULL )
return;
MODULE* module = aPad->GetParent();
module->SetLastEditTime();
// aQuery = true to prompt for confirmation, false to delete silently
if( aQuery )
{
wxString msg = wxString::Format( _( "Delete pad (footprint %s %s)?" ),
module->GetReference(),
module->GetValue() );
if( !IsOK( this, msg ) )
return;
}
// Stores the initial bounding box to refresh the old area
EDA_RECT bbox = module->GetBoundingBox();
m_Pcb->m_Status_Pcb = 0;
GetBoard()->PadDelete( aPad );
// Update the bounding box
module->CalculateBoundingBox();
// Refresh the modified screen area, using the initial bounding box
// which is perhaps larger than the new bounding box
m_canvas->RefreshDrawingRect( bbox );
OnModify();
}
void PCB_BASE_FRAME::DeletePad( D_PAD* aPad, bool aQuery )
{
if( aPad == NULL )
return;
MODULE* module = (MODULE*) aPad->GetParent();
module->SetLastEditTime();
// aQuery = true to prompt for confirmation, false to delete silently
if( aQuery )
{
wxString msg;
msg.Printf( _( "Delete Pad (footprint %s %s) ?" ),
GetChars( module->GetReference() ),
GetChars( module->GetValue() ) );
if( !IsOK( this, msg ) )
return;
}
m_Pcb->m_Status_Pcb = 0;
aPad->DeleteStructure();
// Refresh the modified screen area, using the initial bounding box
// which is perhaps larger than the new bounding box
m_canvas->RefreshDrawingRect( module->GetBoundingBox() );
// Update the bounding box
module->CalculateBoundingBox();
OnModify();
}
/* Creates the section $DEVICES
* This is a list of footprints properties
* ( Shapes are in section $SHAPE )
*/
static void CreateDevicesSection( FILE* aFile, BOARD* aPcb )
{
MODULE* module;
fputs( "$DEVICES\n", aFile );
for( module = aPcb->m_Modules; module; module = module->Next() )
{
fprintf( aFile, "DEVICE \"%s\"\n", TO_UTF8( module->GetReference() ) );
fprintf( aFile, "PART \"%s\"\n", TO_UTF8( module->GetValue() ) );
fprintf( aFile, "PACKAGE \"%s\"\n", module->GetFPID().Format().c_str() );
// The TYPE attribute is almost freeform
const char* ty = "TH";
if( module->GetAttributes() & MOD_CMS )
ty = "SMD";
if( module->GetAttributes() & MOD_VIRTUAL )
ty = "VIRTUAL";
fprintf( aFile, "TYPE %s\n", ty );
}
fputs( "$ENDDEVICES\n\n", aFile );
}
// see class_edge_mod.h
void EDGE_MODULE::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM >& aList )
{
wxString msg;
MODULE* module = (MODULE*) m_Parent;
if( !module )
return;
BOARD* board = (BOARD*) module->GetParent();
if( !board )
return;
aList.push_back( MSG_PANEL_ITEM( _( "Graphic Item" ), wxEmptyString, DARKCYAN ) );
aList.push_back( MSG_PANEL_ITEM( _( "Module" ), module->GetReference(), DARKCYAN ) );
aList.push_back( MSG_PANEL_ITEM( _( "Value" ), module->GetValue(), BLUE ) );
msg.Printf( wxT( "%8.8lX" ), module->GetTimeStamp() );
aList.push_back( MSG_PANEL_ITEM( _( "TimeStamp" ), msg, BROWN ) );
aList.push_back( MSG_PANEL_ITEM( _( "Mod Layer" ),
module->GetLayerName(), RED ) );
aList.push_back( MSG_PANEL_ITEM( _( "Seg Layer" ),
GetLayerName(), RED ) );
msg = ::CoordinateToString( m_Width );
aList.push_back( MSG_PANEL_ITEM( _( "Width" ), msg, BLUE ) );
}
MODULE* PCB_EDIT_FRAME::ListAndSelectModuleName()
{
if( GetBoard()->m_Modules == NULL )
{
DisplayError( this, _( "No footprints" ) );
return 0;
}
wxArrayString listnames;
MODULE* module;
for( module = GetBoard()->m_Modules; module; module = module->Next() )
listnames.Add( module->GetReference() );
wxArrayString headers;
headers.Add( wxT( "Module" ) );
std::vector<wxArrayString> itemsToDisplay;
// Conversion from wxArrayString to vector of ArrayString
for( unsigned i = 0; i < listnames.GetCount(); i++ )
{
wxArrayString item;
item.Add( listnames[i] );
itemsToDisplay.push_back( item );
}
EDA_LIST_DIALOG dlg( this, _( "Components" ), headers, itemsToDisplay, wxEmptyString );
if( dlg.ShowModal() != wxID_OK )
return NULL;
wxString ref = dlg.GetTextSelection();
for( module = GetBoard()->m_Modules; module; module = module->Next() )
{
if( module->GetReference() == ref )
break;
}
return module;
}
bool BOARD_NETLIST_UPDATER::deleteUnusedComponents( NETLIST& aNetlist )
{
wxString msg;
MODULE* nextModule;
const COMPONENT* component;
for( MODULE* module = m_board->m_Modules; module != NULL; module = nextModule )
{
nextModule = module->Next();
if( m_lookupByTimestamp )
component = aNetlist.GetComponentByTimeStamp( module->GetPath() );
else
component = aNetlist.GetComponentByReference( module->GetReference() );
if( component == NULL )
{
if( module->IsLocked() )
{
msg.Printf( _( "Component %s is locked, skipping removal.\n" ),
GetChars( module->GetReference() ) );
m_reporter->Report( msg, REPORTER::RPT_INFO );
continue;
}
msg.Printf( _( "Remove component %s." ),
GetChars( module->GetReference() ) );
m_reporter->Report( msg, REPORTER::RPT_ACTION );
msg.Printf( _( "Removing unused component \"%s:%s\".\n" ),
GetChars( module->GetReference() ),
GetChars( module->GetPath() ) );
m_reporter->Report( msg, REPORTER::RPT_INFO );
if( !m_isDryRun )
m_commit.Remove( module );
}
}
return true;
}
// see class_text_mod.h
void TEXTE_MODULE::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM >& aList )
{
MODULE* module = (MODULE*) m_Parent;
if( module == NULL ) // Happens in modedit, and for new texts
return;
wxString msg, Line;
static const wxString text_type_msg[3] =
{
_( "Ref." ), _( "Value" ), _( "Text" )
};
Line = module->GetReference();
aList.push_back( MSG_PANEL_ITEM( _( "Footprint" ), Line, DARKCYAN ) );
Line = GetShownText();
aList.push_back( MSG_PANEL_ITEM( _( "Text" ), Line, BROWN ) );
wxASSERT( m_Type >= TEXT_is_REFERENCE && m_Type <= TEXT_is_DIVERS );
aList.push_back( MSG_PANEL_ITEM( _( "Type" ), text_type_msg[m_Type], DARKGREEN ) );
if( !IsVisible() )
msg = _( "No" );
else
msg = _( "Yes" );
aList.push_back( MSG_PANEL_ITEM( _( "Display" ), msg, DARKGREEN ) );
// Display text layer
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ), GetLayerName(), DARKGREEN ) );
if( IsMirrored() )
msg = _( "Yes" );
else
msg = _( "No" );
aList.push_back( MSG_PANEL_ITEM( _( "Mirror" ), msg, DARKGREEN ) );
msg.Printf( wxT( "%.1f" ), GetTextAngleDegrees() );
aList.push_back( MSG_PANEL_ITEM( _( "Angle" ), msg, DARKGREEN ) );
msg = ::CoordinateToString( GetThickness() );
aList.push_back( MSG_PANEL_ITEM( _( "Thickness" ), msg, DARKGREEN ) );
msg = ::CoordinateToString( GetTextWidth() );
aList.push_back( MSG_PANEL_ITEM( _( "Width" ), msg, RED ) );
msg = ::CoordinateToString( GetTextHeight() );
aList.push_back( MSG_PANEL_ITEM( _( "Height" ), msg, RED ) );
}
// see class_text_mod.h
void TEXTE_MODULE::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM >& aList )
{
MODULE* module = (MODULE*) m_Parent;
if( module == NULL ) // Happens in modedit, and for new texts
return;
wxString msg, Line;
static const wxString text_type_msg[3] =
{
_( "Ref." ), _( "Value" ), _( "Text" )
};
Line = module->GetReference();
aList.push_back( MSG_PANEL_ITEM( _( "Module" ), Line, DARKCYAN ) );
Line = m_Text;
aList.push_back( MSG_PANEL_ITEM( _( "Text" ), Line, BROWN ) );
wxASSERT( m_Type >= TEXT_is_REFERENCE && m_Type <= TEXT_is_DIVERS );
aList.push_back( MSG_PANEL_ITEM( _( "Type" ), text_type_msg[m_Type], DARKGREEN ) );
if( m_NoShow )
msg = _( "No" );
else
msg = _( "Yes" );
aList.push_back( MSG_PANEL_ITEM( _( "Display" ), msg, DARKGREEN ) );
// Display text layer
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ), GetLayerName(), DARKGREEN ) );
if( m_Mirror )
msg = _( " Yes" );
else
msg = _( " No" );
aList.push_back( MSG_PANEL_ITEM( _( "Mirror" ), msg, DARKGREEN ) );
msg.Printf( wxT( "%.1f" ), m_Orient / 10.0 );
aList.push_back( MSG_PANEL_ITEM( _( "Orient" ), msg, DARKGREEN ) );
msg = ::CoordinateToString( m_Thickness );
aList.push_back( MSG_PANEL_ITEM( _( "Thickness" ), msg, DARKGREEN ) );
msg = ::CoordinateToString( m_Size.x );
aList.push_back( MSG_PANEL_ITEM( _( "H Size" ), msg, RED ) );
msg = ::CoordinateToString( m_Size.y );
aList.push_back( MSG_PANEL_ITEM( _( "V Size" ), msg, RED ) );
}
/* Extract the D356 record from the modules (pads) */
static void build_pad_testpoints( BOARD *aPcb,
std::vector <D356_RECORD>& aRecords )
{
wxPoint origin = aPcb->GetAuxOrigin();
for( MODULE *module = aPcb->m_Modules;
module; module = module->Next() )
{
for( D_PAD *pad = module->Pads(); pad; pad = pad->Next() )
{
D356_RECORD rk;
rk.access = compute_pad_access_code( aPcb, pad->GetLayerSet() );
// It could be a mask only pad, we only handle pads with copper here
if( rk.access != -1 )
{
rk.netname = pad->GetNetname();
rk.refdes = module->GetReference();
pad->StringPadName( rk.pin );
rk.midpoint = false; // XXX MAYBE need to be computed (how?)
const wxSize& drill = pad->GetDrillSize();
rk.drill = std::min( drill.x, drill.y );
rk.hole = (rk.drill != 0);
rk.smd = pad->GetAttribute() == PAD_ATTRIB_SMD;
rk.mechanical = (pad->GetAttribute() == PAD_ATTRIB_HOLE_NOT_PLATED);
rk.x_location = pad->GetPosition().x - origin.x;
rk.y_location = origin.y - pad->GetPosition().y;
rk.x_size = pad->GetSize().x;
// Rule: round pads have y = 0
if( pad->GetShape() == PAD_SHAPE_CIRCLE )
rk.y_size = 0;
else
rk.y_size = pad->GetSize().y;
rk.rotation = -KiROUND( pad->GetOrientation() ) / 10;
if( rk.rotation < 0 ) rk.rotation += 360;
// the value indicates which sides are *not* accessible
rk.soldermask = 3;
if( pad->GetLayerSet()[F_Mask] )
rk.soldermask &= ~1;
if( pad->GetLayerSet()[B_Mask] )
rk.soldermask &= ~2;
aRecords.push_back( rk );
}
}
}
}
/* Emit the netlist (which is actually the thing for which GenCAD is used these
* days!); tracks are handled later */
static void CreateSignalsSection( FILE* aFile, BOARD* aPcb )
{
wxString msg;
NETINFO_ITEM* net;
D_PAD* pad;
MODULE* module;
int NbNoConn = 1;
fputs( "$SIGNALS\n", aFile );
for( unsigned ii = 0; ii < aPcb->GetNetCount(); ii++ )
{
net = aPcb->FindNet( ii );
if( net->GetNetname() == wxEmptyString ) // dummy netlist (no connection)
{
wxString msg; msg << wxT( "NoConnection" ) << NbNoConn++;
}
if( net->GetNet() <= 0 ) // dummy netlist (no connection)
continue;
msg = wxT( "SIGNAL " ) + net->GetNetname();
fputs( TO_UTF8( msg ), aFile );
fputs( "\n", aFile );
for( module = aPcb->m_Modules; module; module = module->Next() )
{
for( pad = module->Pads(); pad; pad = pad->Next() )
{
wxString padname;
if( pad->GetNetCode() != net->GetNet() )
continue;
pad->StringPadName( padname );
msg.Printf( wxT( "NODE %s %s" ),
GetChars( module->GetReference() ),
GetChars( padname ) );
fputs( TO_UTF8( msg ), aFile );
fputs( "\n", aFile );
}
}
}
fputs( "$ENDSIGNALS\n\n", aFile );
}
/*
* Creates a footprint position file
* aSide = 0 -> Back (bottom) side)
* aSide = 1 -> Front (top) side)
* aSide = 2 -> both sides
* if aFullFileName is empty, the file is not created, only the
* count of footprints to place is returned
*/
int PCB_EDIT_FRAME::DoGenFootprintsPositionFile( const wxString& aFullFileName,
bool aUnitsMM,
bool aForceSmdItems, int aSide,
bool aFormatCSV )
{
MODULE* footprint;
// Minimal text lengths:
int lenRefText = 8;
int lenValText = 8;
int lenPkgText = 16;
File_Place_Offset = GetAuxOrigin();
// Calculating the number of useful footprints (CMS attribute, not VIRTUAL)
int footprintCount = 0;
// Select units:
double conv_unit = aUnitsMM ? conv_unit_mm : conv_unit_inch;
const char *unit_text = aUnitsMM ? unit_text_mm : unit_text_inch;
// Build and sort the list of footprints alphabetically
std::vector<LIST_MOD> list;
list.reserve( footprintCount );
for( footprint = GetBoard()->m_Modules; footprint; footprint = footprint->Next() )
{
if( aSide != PCB_BOTH_SIDES )
{
if( footprint->GetLayer() == B_Cu && aSide == PCB_FRONT_SIDE)
continue;
if( footprint->GetLayer() == F_Cu && aSide == PCB_BACK_SIDE)
continue;
}
if( footprint->GetAttributes() & MOD_VIRTUAL )
{
DBG( printf( "skipping footprint %s because it's virtual\n",
TO_UTF8( footprint->GetReference() ) );)
continue;
}
// see class_edge_mod.h
void EDGE_MODULE::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM >& aList )
{
wxString msg;
MODULE* module = (MODULE*) m_Parent;
if( !module )
return;
BOARD* board = (BOARD*) module->GetParent();
if( !board )
return;
aList.push_back( MSG_PANEL_ITEM( _( "Footprint" ), module->GetReference(), DARKCYAN ) );
aList.push_back( MSG_PANEL_ITEM( _( "Value" ), module->GetValue(), BLUE ) );
msg.Printf( wxT( "%8.8lX" ), module->GetTimeStamp() );
aList.push_back( MSG_PANEL_ITEM( _( "TimeStamp" ), msg, BROWN ) );
aList.push_back( MSG_PANEL_ITEM( _( "Footprint Layer" ),
module->GetLayerName(), RED ) );
// append the features shared with the base class
DRAWSEGMENT::GetMsgPanelInfo( aList );
}
void D_PAD::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM>& aList )
{
MODULE* module;
wxString Line;
BOARD* board;
module = (MODULE*) m_Parent;
if( module )
{
wxString msg = module->GetReference();
aList.push_back( MSG_PANEL_ITEM( _( "Footprint" ), msg, DARKCYAN ) );
StringPadName( Line );
aList.push_back( MSG_PANEL_ITEM( _( "Pad" ), Line, BROWN ) );
}
aList.push_back( MSG_PANEL_ITEM( _( "Net" ), GetNetname(), DARKCYAN ) );
/* For test and debug only: display m_physical_connexion and
* m_logical_connexion */
#if 1 // Used only to debug connectivity calculations
Line.Printf( wxT( "%d-%d-%d " ), GetSubRatsnest(), GetSubNet(), GetZoneSubNet() );
aList.push_back( MSG_PANEL_ITEM( wxT( "L-P-Z" ), Line, DARKGREEN ) );
#endif
board = GetBoard();
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ),
LayerMaskDescribe( board, m_layerMask ), DARKGREEN ) );
aList.push_back( MSG_PANEL_ITEM( ShowPadShape(), ShowPadAttr(), DARKGREEN ) );
Line = ::CoordinateToString( m_Size.x );
aList.push_back( MSG_PANEL_ITEM( _( "Width" ), Line, RED ) );
Line = ::CoordinateToString( m_Size.y );
aList.push_back( MSG_PANEL_ITEM( _( "Height" ), Line, RED ) );
Line = ::CoordinateToString( (unsigned) m_Drill.x );
if( GetDrillShape() == PAD_DRILL_SHAPE_CIRCLE )
{
aList.push_back( MSG_PANEL_ITEM( _( "Drill" ), Line, RED ) );
}
else
{
Line = ::CoordinateToString( (unsigned) m_Drill.x );
wxString msg;
msg = ::CoordinateToString( (unsigned) m_Drill.y );
Line += wxT( "/" ) + msg;
aList.push_back( MSG_PANEL_ITEM( _( "Drill X / Y" ), Line, RED ) );
}
double module_orient = module ? module->GetOrientation() : 0;
if( module_orient )
Line.Printf( wxT( "%3.1f(+%3.1f)" ),
( m_Orient - module_orient ) / 10.0,
module_orient / 10.0 );
else
Line.Printf( wxT( "%3.1f" ), m_Orient / 10.0 );
aList.push_back( MSG_PANEL_ITEM( _( "Angle" ), Line, LIGHTBLUE ) );
Line = ::CoordinateToString( m_Pos.x ) + wxT( ", " ) + ::CoordinateToString( m_Pos.y );
aList.push_back( MSG_PANEL_ITEM( _( "Position" ), Line, LIGHTBLUE ) );
if( GetPadToDieLength() )
{
Line = ::CoordinateToString( GetPadToDieLength() );
aList.push_back( MSG_PANEL_ITEM( _( "Length in package" ), Line, CYAN ) );
}
}
void D_PAD::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM>& aList )
{
MODULE* module;
wxString Line;
BOARD* board;
module = (MODULE*) m_Parent;
if( module )
{
aList.push_back( MSG_PANEL_ITEM( _( "Footprint" ), module->GetReference(), DARKCYAN ) );
aList.push_back( MSG_PANEL_ITEM( _( "Pad" ), m_name, BROWN ) );
}
aList.push_back( MSG_PANEL_ITEM( _( "Net" ), GetNetname(), DARKCYAN ) );
board = GetBoard();
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ),
LayerMaskDescribe( board, m_layerMask ), DARKGREEN ) );
aList.push_back( MSG_PANEL_ITEM( ShowPadShape(), ShowPadAttr(), DARKGREEN ) );
Line = ::CoordinateToString( m_Size.x );
aList.push_back( MSG_PANEL_ITEM( _( "Width" ), Line, RED ) );
Line = ::CoordinateToString( m_Size.y );
aList.push_back( MSG_PANEL_ITEM( _( "Height" ), Line, RED ) );
Line = ::CoordinateToString( (unsigned) m_Drill.x );
if( GetDrillShape() == PAD_DRILL_SHAPE_CIRCLE )
{
aList.push_back( MSG_PANEL_ITEM( _( "Drill" ), Line, RED ) );
}
else
{
Line = ::CoordinateToString( (unsigned) m_Drill.x );
wxString msg;
msg = ::CoordinateToString( (unsigned) m_Drill.y );
Line += wxT( "/" ) + msg;
aList.push_back( MSG_PANEL_ITEM( _( "Drill X / Y" ), Line, RED ) );
}
double module_orient_degrees = module ? module->GetOrientationDegrees() : 0;
if( module_orient_degrees != 0.0 )
Line.Printf( wxT( "%3.1f(+%3.1f)" ),
GetOrientationDegrees() - module_orient_degrees,
module_orient_degrees );
else
Line.Printf( wxT( "%3.1f" ), GetOrientationDegrees() );
aList.push_back( MSG_PANEL_ITEM( _( "Angle" ), Line, LIGHTBLUE ) );
Line = ::CoordinateToString( m_Pos.x ) + wxT( ", " ) + ::CoordinateToString( m_Pos.y );
aList.push_back( MSG_PANEL_ITEM( _( "Position" ), Line, LIGHTBLUE ) );
if( GetPadToDieLength() )
{
Line = ::CoordinateToString( GetPadToDieLength() );
aList.push_back( MSG_PANEL_ITEM( _( "Length in package" ), Line, CYAN ) );
}
}
void D_PAD::GetMsgPanelInfo( EDA_UNITS_T aUnits, std::vector< MSG_PANEL_ITEM>& aList )
{
MODULE* module;
wxString msg;
BOARD* board;
module = (MODULE*) m_Parent;
if( module )
{
aList.push_back( MSG_PANEL_ITEM( _( "Footprint" ), module->GetReference(), DARKCYAN ) );
aList.push_back( MSG_PANEL_ITEM( _( "Pad" ), m_name, BROWN ) );
}
aList.push_back( MSG_PANEL_ITEM( _( "Net" ), UnescapeString( GetNetname() ), DARKCYAN ) );
board = GetBoard();
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ),
LayerMaskDescribe( board, m_layerMask ), DARKGREEN ) );
aList.push_back( MSG_PANEL_ITEM( ShowPadShape(), ShowPadAttr(), DARKGREEN ) );
msg = MessageTextFromValue( aUnits, m_Size.x, true );
aList.push_back( MSG_PANEL_ITEM( _( "Width" ), msg, RED ) );
msg = MessageTextFromValue( aUnits, m_Size.y, true );
aList.push_back( MSG_PANEL_ITEM( _( "Height" ), msg, RED ) );
msg = MessageTextFromValue( aUnits, m_Drill.x, true );
if( GetDrillShape() == PAD_DRILL_SHAPE_CIRCLE )
{
aList.push_back( MSG_PANEL_ITEM( _( "Drill" ), msg, RED ) );
}
else
{
msg = MessageTextFromValue( aUnits, m_Drill.x, true )
+ wxT( "/" )
+ MessageTextFromValue( aUnits, m_Drill.y, true );
aList.push_back( MSG_PANEL_ITEM( _( "Drill X / Y" ), msg, RED ) );
}
double module_orient_degrees = module ? module->GetOrientationDegrees() : 0;
if( module_orient_degrees != 0.0 )
msg.Printf( wxT( "%3.1f(+%3.1f)" ),
GetOrientationDegrees() - module_orient_degrees,
module_orient_degrees );
else
msg.Printf( wxT( "%3.1f" ), GetOrientationDegrees() );
aList.push_back( MSG_PANEL_ITEM( _( "Angle" ), msg, LIGHTBLUE ) );
msg = MessageTextFromValue( aUnits, m_Pos.x )
+ wxT( ", " )
+ MessageTextFromValue( aUnits, m_Pos.y );
aList.push_back( MSG_PANEL_ITEM( _( "Position" ), msg, LIGHTBLUE ) );
if( GetPadToDieLength() )
{
msg = MessageTextFromValue( aUnits, GetPadToDieLength(), true );
aList.push_back( MSG_PANEL_ITEM( _( "Length in package" ), msg, CYAN ) );
}
}
void DIALOG_NETLIST::OnTestFootprintsClick( wxCommandEvent& event )
{
if( m_parent->GetBoard()->m_Modules == NULL )
{
DisplayInfoMessage( this, _( "No footprints" ) );
return;
}
// Lists of duplicates, missing references and not in netlist footprints:
std::vector <MODULE*> duplicate;
wxArrayString missing;
std::vector <MODULE*> notInNetlist;
wxString netlistFilename = m_NetlistFilenameCtrl->GetValue();
if( !verifyFootprints( netlistFilename, wxEmptyString, duplicate, missing, notInNetlist ) )
return;
#define ERR_CNT_MAX 100 // Max number of errors to output in dialog
// to avoid a too long message list
wxString list; // The messages to display
m_parent->SetLastNetListRead( netlistFilename );
int err_cnt = 0;
// Search for duplicate footprints.
if( duplicate.size() == 0 )
list << wxT("<p><b>") << _( "No duplicate." ) << wxT("</b></p>");
else
{
list << wxT("<p><b>") << _( "Duplicates:" ) << wxT("</b></p>");
for( unsigned ii = 0; ii < duplicate.size(); ii++ )
{
MODULE* module = duplicate[ii];
if( module->GetReference().IsEmpty() )
list << wxT("<br>") << wxT("[noref)");
else
list << wxT("<br>") << module->GetReference();
list << wxT(" (<i>") << module->GetValue() << wxT("</i>)");
list << wxT(" @ ");
list << CoordinateToString( module->GetPosition().x ),
list << wxT(", ") << CoordinateToString( module->GetPosition().y ),
err_cnt++;
if( ERR_CNT_MAX < err_cnt )
break;
}
}
// Search for missing modules on board.
if( missing.size() == 0 )
list << wxT("<p><b>") << _( "No missing footprints." ) << wxT("</b></p>");
else
{
list << wxT("<p><b>") << _( "Missing:" ) << wxT("</b></p>");
for( unsigned ii = 0; ii < missing.size(); ii += 2 )
{
list << wxT("<br>") << missing[ii];
list << wxT(" (<i>") << missing[ii+1] << wxT("</i>)");
err_cnt++;
if( ERR_CNT_MAX < err_cnt )
break;
}
}
// Search for modules found on board but not in net list.
if( notInNetlist.size() == 0 )
list << wxT( "<p><b>" ) << _( "No extra footprints." ) << wxT( "</b></p>" );
else
{
list << wxT( "<p><b>" ) << _( "Not in Netlist:" ) << wxT( "</b></p>" );
for( unsigned ii = 0; ii < notInNetlist.size(); ii++ )
{
MODULE* module = notInNetlist[ii];
if( module->GetReference().IsEmpty() )
list << wxT( "<br>" ) << wxT( "[noref)" );
else
list << wxT( "<br>" ) << module->GetReference() ;
list << wxT( " (<i>" ) << module->GetValue() << wxT( "</i>)" );
list << wxT( " @ " );
list << CoordinateToString( module->GetPosition().x ),
list << wxT( ", " ) << CoordinateToString( module->GetPosition().y ),
err_cnt++;
if( ERR_CNT_MAX < err_cnt )
break;
}
}
if( ERR_CNT_MAX < err_cnt )
{
list << wxT( "<p><b>" )
<< _( "Too many errors: some are skipped" )
<< wxT( "</b></p>" );
}
HTML_MESSAGE_BOX dlg( this, _( "Check footprints" ) );
dlg.AddHTML_Text( list );
dlg.ShowModal();
}
bool DIALOG_NETLIST::verifyFootprints( const wxString& aNetlistFilename,
const wxString & aCmpFilename,
std::vector< MODULE* >& aDuplicates,
wxArrayString& aMissing,
std::vector< MODULE* >& aNotInNetlist )
{
wxString msg;
MODULE* module;
MODULE* nextModule;
NETLIST netlist;
wxBusyCursor dummy; // Shows an hourglass while calculating.
NETLIST_READER* netlistReader;
COMPONENT* component;
try
{
netlistReader = NETLIST_READER::GetNetlistReader( &netlist, aNetlistFilename,
aCmpFilename );
if( netlistReader == NULL )
{
msg.Printf( _( "Cannot open netlist file \"%s\"." ), GetChars( aNetlistFilename ) );
wxMessageBox( msg, _( "Netlist Load Error." ), wxOK | wxICON_ERROR );
return false;
}
std::auto_ptr< NETLIST_READER > nlr( netlistReader );
netlistReader->LoadNetlist();
}
catch( const IO_ERROR& ioe )
{
msg.Printf( _( "Error loading netlist file:\n%s" ), ioe.errorText.GetData() );
wxMessageBox( msg, _( "Netlist Load Error" ), wxOK | wxICON_ERROR );
return false;
}
BOARD* pcb = m_parent->GetBoard();
// Search for duplicate footprints.
module = pcb->m_Modules;
for( ; module != NULL; module = module->Next() )
{
nextModule = module->Next();
for( ; nextModule != NULL; nextModule = nextModule->Next() )
{
if( module->GetReference().CmpNoCase( nextModule->GetReference() ) == 0 )
{
aDuplicates.push_back( module );
break;
}
}
}
// Search for component footprints in the netlist but not on the board.
for( unsigned ii = 0; ii < netlist.GetCount(); ii++ )
{
component = netlist.GetComponent( ii );
module = pcb->FindModuleByReference( component->GetReference() );
if( module == NULL )
{
aMissing.Add( component->GetReference() );
aMissing.Add( component->GetValue() );
}
}
// Search for component footprints found on board but not in netlist.
module = pcb->m_Modules;
for( ; module != NULL; module = module->Next() )
{
component = netlist.GetComponentByReference( module->GetReference() );
if( component == NULL )
aNotInNetlist.push_back( module );
}
return true;
}
void D_PAD::GetMsgPanelInfo( std::vector< MSG_PANEL_ITEM>& aList )
{
MODULE* module;
wxString Line;
BOARD* board;
module = (MODULE*) m_Parent;
if( module )
{
wxString msg = module->GetReference();
aList.push_back( MSG_PANEL_ITEM( _( "Module" ), msg, DARKCYAN ) );
ReturnStringPadName( Line );
aList.push_back( MSG_PANEL_ITEM( _( "RefP" ), Line, BROWN ) );
}
aList.push_back( MSG_PANEL_ITEM( _( "Net" ), m_Netname, DARKCYAN ) );
/* For test and debug only: display m_physical_connexion and
* m_logical_connexion */
#if 1 // Used only to debug connectivity calculations
Line.Printf( wxT( "%d-%d-%d " ), GetSubRatsnest(), GetSubNet(), GetZoneSubNet() );
aList.push_back( MSG_PANEL_ITEM( wxT( "L-P-Z" ), Line, DARKGREEN ) );
#endif
board = GetBoard();
wxString layerInfo;
if( (m_layerMask & ALL_CU_LAYERS) == 0 ) // pad is not on any copper layers
{
switch( m_layerMask & ~ALL_CU_LAYERS )
{
case ADHESIVE_LAYER_BACK:
layerInfo = board->GetLayerName( ADHESIVE_N_BACK );
break;
case ADHESIVE_LAYER_FRONT:
layerInfo = board->GetLayerName( ADHESIVE_N_FRONT );
break;
case SOLDERPASTE_LAYER_BACK:
layerInfo = board->GetLayerName( SOLDERPASTE_N_BACK );
break;
case SOLDERPASTE_LAYER_FRONT:
layerInfo = board->GetLayerName( SOLDERPASTE_N_FRONT );
break;
case SILKSCREEN_LAYER_BACK:
layerInfo = board->GetLayerName( SILKSCREEN_N_BACK );
break;
case SILKSCREEN_LAYER_FRONT:
layerInfo = board->GetLayerName( SILKSCREEN_N_FRONT );
break;
case SOLDERMASK_LAYER_BACK:
layerInfo = board->GetLayerName( SOLDERMASK_N_BACK );
break;
case SOLDERMASK_LAYER_FRONT:
layerInfo = board->GetLayerName( SOLDERMASK_N_FRONT );
break;
case DRAW_LAYER:
layerInfo = board->GetLayerName( DRAW_N );
break;
case COMMENT_LAYER:
layerInfo = board->GetLayerName( COMMENT_N );
break;
case ECO1_LAYER:
layerInfo = board->GetLayerName( ECO1_N );
break;
case ECO2_LAYER:
layerInfo = board->GetLayerName( ECO2_N );
break;
case EDGE_LAYER:
layerInfo = board->GetLayerName( EDGE_N );
break;
default:
layerInfo = _( "Non-copper" );
break;
}
}
else
{
#define INTERIOR_COPPER (ALL_CU_LAYERS & ~(LAYER_BACK | LAYER_FRONT))
static const wxChar* andInternal = _( " & int" );
if( (m_layerMask & (LAYER_BACK | LAYER_FRONT)) == LAYER_BACK )
{
layerInfo = board->GetLayerName( LAYER_N_BACK );
if( m_layerMask & INTERIOR_COPPER )
layerInfo += andInternal;
}
else if( (m_layerMask & (LAYER_BACK | LAYER_FRONT)) == (LAYER_BACK | LAYER_FRONT) )
{
layerInfo = board->GetLayerName( LAYER_N_BACK ) + wxT(", ") +
board->GetLayerName( LAYER_N_FRONT );
if( m_layerMask & INTERIOR_COPPER )
layerInfo += andInternal;
}
else if( (m_layerMask & (LAYER_BACK | LAYER_FRONT)) == LAYER_FRONT )
{
layerInfo = board->GetLayerName( LAYER_N_FRONT );
if( m_layerMask & INTERIOR_COPPER )
layerInfo += andInternal;
}
else // necessarily true: if( m_layerMask & INTERIOR_COPPER )
{
layerInfo = _( "internal" );
}
}
aList.push_back( MSG_PANEL_ITEM( _( "Layer" ), layerInfo, DARKGREEN ) );
aList.push_back( MSG_PANEL_ITEM( ShowPadShape(), ShowPadAttr(), DARKGREEN ) );
Line = ::CoordinateToString( m_Size.x );
aList.push_back( MSG_PANEL_ITEM( _( "H Size" ), Line, RED ) );
Line = ::CoordinateToString( m_Size.y );
aList.push_back( MSG_PANEL_ITEM( _( "V Size" ), Line, RED ) );
Line = ::CoordinateToString( (unsigned) m_Drill.x );
if( m_DrillShape == PAD_CIRCLE )
{
aList.push_back( MSG_PANEL_ITEM( _( "Drill" ), Line, RED ) );
}
else
{
Line = ::CoordinateToString( (unsigned) m_Drill.x );
wxString msg;
msg = ::CoordinateToString( (unsigned) m_Drill.y );
Line += wxT( "/" ) + msg;
aList.push_back( MSG_PANEL_ITEM( _( "Drill X / Y" ), Line, RED ) );
}
int module_orient = module ? module->GetOrientation() : 0;
if( module_orient )
Line.Printf( wxT( "%3.1f(+%3.1f)" ),
(double) ( m_Orient - module_orient ) / 10,
(double) module_orient / 10 );
else
Line.Printf( wxT( "%3.1f" ), (double) m_Orient / 10 );
aList.push_back( MSG_PANEL_ITEM( _( "Orient" ), Line, LIGHTBLUE ) );
Line = ::CoordinateToString( m_Pos.x );
aList.push_back( MSG_PANEL_ITEM( _( "X Pos" ), Line, LIGHTBLUE ) );
Line = ::CoordinateToString( m_Pos.y );
aList.push_back( MSG_PANEL_ITEM( _( "Y pos" ), Line, LIGHTBLUE ) );
if( GetPadToDieLength() )
{
Line = ::CoordinateToString( GetPadToDieLength() );
aList.push_back( MSG_PANEL_ITEM( _( "Length in package" ), Line, CYAN ) );
}
}
/* Creates the section $COMPONENTS (Footprints placement)
* Bottom side components are difficult to handle: shapes must be mirrored or
* flipped, silk layers need to be handled correctly and so on. Also it seems
* that *noone* follows the specs...
*/
static void CreateComponentsSection( FILE* aFile, BOARD* aPcb )
{
fputs( "$COMPONENTS\n", aFile );
int cu_count = aPcb->GetCopperLayerCount();
for( MODULE* module = aPcb->m_Modules; module; module = module->Next() )
{
const char* mirror;
const char* flip;
double fp_orient = module->GetOrientation();
if( module->GetFlag() )
{
mirror = "0";
flip = "FLIP";
NEGATE_AND_NORMALIZE_ANGLE_POS( fp_orient );
}
else
{
mirror = "0";
flip = "0";
}
fprintf( aFile, "\nCOMPONENT %s\n",
TO_UTF8( module->GetReference() ) );
fprintf( aFile, "DEVICE %s_%s\n",
TO_UTF8( module->GetReference() ),
TO_UTF8( module->GetValue() ) );
fprintf( aFile, "PLACE %g %g\n",
MapXTo( module->GetPosition().x ),
MapYTo( module->GetPosition().y ) );
fprintf( aFile, "LAYER %s\n",
(module->GetFlag()) ? "BOTTOM" : "TOP" );
fprintf( aFile, "ROTATION %g\n",
fp_orient / 10.0 );
fprintf( aFile, "SHAPE %s %s %s\n",
TO_UTF8( module->GetReference() ),
mirror, flip );
// Text on silk layer: RefDes and value (are they actually useful?)
TEXTE_MODULE *textmod = &module->Reference();
for( int ii = 0; ii < 2; ii++ )
{
double txt_orient = textmod->GetOrientation();
std::string layer = GenCADLayerName( cu_count, module->GetFlag() ? B_SilkS : F_SilkS );
fprintf( aFile, "TEXT %g %g %g %g %s %s \"%s\"",
textmod->GetPos0().x / SCALE_FACTOR,
-textmod->GetPos0().y / SCALE_FACTOR,
textmod->GetSize().x / SCALE_FACTOR,
txt_orient / 10.0,
mirror,
layer.c_str(),
TO_UTF8( textmod->GetText() ) );
// Please note, the width is approx
fprintf( aFile, " 0 0 %g %g\n",
( textmod->GetSize().x * textmod->GetLength() ) / SCALE_FACTOR,
textmod->GetSize().y / SCALE_FACTOR );
textmod = &module->Value(); // Dirty trick for the second iteration
}
// The SHEET is a 'generic description' for referencing the component
fprintf( aFile, "SHEET \"RefDes: %s, Value: %s\"\n",
TO_UTF8( module->GetReference() ),
TO_UTF8( module->GetValue() ) );
}
fputs( "$ENDCOMPONENTS\n\n", aFile );
}
void PCB_EDIT_FRAME::RecreateBOMFileFromBoard( wxCommandEvent& aEvent )
{
wxFileName fn;
FILE* fp_bom;
MODULE* module = GetBoard()->m_Modules;
wxString msg;
if( module == NULL )
{
DisplayError( this, _( "Cannot export BOM: there are no footprints in the PCB" ) );
return;
}
/* Set the file extension: */
fn = GetBoard()->GetFileName();
fn.SetExt( CsvFileExtension );
wxString pro_dir = wxPathOnly( Prj().GetProjectFullName() );
wxFileDialog dlg( this, _( "Save Bill of Materials" ), pro_dir,
fn.GetFullName(), CsvFileWildcard(),
wxFD_SAVE | wxFD_OVERWRITE_PROMPT );
if( dlg.ShowModal() == wxID_CANCEL )
return;
fn = dlg.GetPath();
fp_bom = wxFopen( fn.GetFullPath(), wxT( "wt" ) );
if( fp_bom == NULL )
{
msg.Printf( _( "Unable to create file \"%s\"" ), GetChars( fn.GetFullPath() ) );
DisplayError( this, msg );
return;
}
// Write header:
msg = wxT( "\"" );
msg << _( "Id" ) << wxT( "\";\"" );
msg << _( "Designator" ) << wxT( "\";\"" );
msg << _( "Package" ) << wxT( "\";\"" );
msg << _( "Quantity" ) << wxT( "\";\"" );
msg << _( "Designation" ) << wxT( "\";\"" );
msg << _( "Supplier and ref" ) << wxT( "\";\n" );
fprintf( fp_bom, "%s", TO_UTF8( msg ) );
// Build list
CmpList list;
cmp* comp = NULL;
CmpList::iterator iter;
int i = 1;
while( module != NULL )
{
bool valExist = false;
// try to find component in existing list
for( iter = list.begin(); iter != list.end(); ++iter )
{
cmp* current = *iter;
if( (current->m_Val == module->GetValue()) && (current->m_fpid == module->GetFPID()) )
{
current->m_Ref.Append( wxT( ", " ), 1 );
current->m_Ref.Append( module->GetReference() );
current->m_CmpCount++;
valExist = true;
break;
}
}
// If component does not exist yet, create new one and append it to the list.
if( valExist == false )
{
comp = new cmp();
comp->m_Id = i++;
comp->m_Val = module->GetValue();
comp->m_Ref = module->GetReference();
comp->m_fpid = module->GetFPID();
comp->m_CmpCount = 1;
list.Append( comp );
}
// increment module
module = module->Next();
}
// Print list. Also delete temporary created objects.
for( size_t ii = list.GetCount(); ii > 0; ii-- )
{
cmp* current = *list.begin(); // Because the first object will be removed
// from list, all objects will be get here
msg.Empty();
msg << current->m_Id << wxT( ";\"" );
msg << current->m_Ref << wxT( "\";\"" );
msg << FROM_UTF8( current->m_fpid.GetLibItemName().c_str() ) << wxT( "\";" );
msg << current->m_CmpCount << wxT( ";\"" );
msg << current->m_Val << wxT( "\";;;\n" );
fprintf( fp_bom, "%s", TO_UTF8( msg ) );
// We do not need this object, now: remove it from list and delete it
list.DeleteObject( current );
delete (current);
}
fclose( fp_bom );
}
/**
* Function Inspect
* is the examining function within the INSPECTOR which is passed to the
* Iterate function. Searches and collects all the objects that the old
* function PcbGeneralLocateAndDisplay() would find, except that it keeps all
* that it finds and does not do any displaying.
*
* @param testItem An EDA_ITEM to examine.
* @param testData The const void* testData, not used here.
* @return SEARCH_RESULT - SEARCH_QUIT if the Iterator is to stop the scan,
* else SCAN_CONTINUE;
*/
SEARCH_RESULT GENERAL_COLLECTOR::Inspect( EDA_ITEM* testItem, const void* testData )
{
BOARD_ITEM* item = (BOARD_ITEM*) testItem;
MODULE* module = NULL;
D_PAD* pad = NULL;
bool pad_through = false;
SEGVIA* via = NULL;
MARKER_PCB* marker = NULL;
#if 0 // debugging
static int breakhere = 0;
switch( item->Type() )
{
case PCB_PAD_T:
{
MODULE* m = (MODULE*) item->GetParent();
if( m->GetReference() == wxT( "Y2" ) )
{
breakhere++;
}
}
break;
case PCB_VIA_T:
breakhere++;
break;
case PCB_TRACE_T:
breakhere++;
break;
case PCB_ZONE_T:
breakhere++;
break;
case PCB_TEXT_T:
breakhere++;
break;
case PCB_LINE_T:
breakhere++;
break;
case PCB_DIMENSION_T:
breakhere++;
break;
case PCB_MODULE_TEXT_T:
{
TEXTE_MODULE* tm = (TEXTE_MODULE*) item;
if( tm->GetText() == wxT( "10uH" ) )
{
breakhere++;
}
}
break;
case PCB_MODULE_T:
{
MODULE* m = (MODULE*) item;
if( m->GetReference() == wxT( "C98" ) )
{
breakhere++;
}
}
break;
case PCB_MARKER_T:
breakhere++;
break;
default:
breakhere++;
break;
}
#endif
switch( item->Type() )
{
case PCB_PAD_T:
// there are pad specific visibility controls.
// Criterias to select a pad is:
// for smd pads: the module parent must be seen, and pads on the corresponding
// board side must be seen
// if pad is a thru hole, then it can be visible when its parent module is not.
// for through pads: pads on Front or Back board sides must be seen
pad = (D_PAD*) item;
if( (pad->GetAttribute() != PAD_SMD) &&
(pad->GetAttribute() != PAD_CONN) ) // a hole is present, so multiple layers
{
// proceed to the common tests below, but without the parent module test,
// by leaving module==NULL, but having pad != null
pad_through = true;
}
else // smd, so use pads test after module test
{
module = (MODULE*) item->GetParent();
}
break;
case PCB_VIA_T: // vias are on many layers, so layer test is specific
via = (SEGVIA*) item;
break;
case PCB_TRACE_T:
break;
case PCB_ZONE_T:
break;
case PCB_ZONE_AREA_T:
break;
case PCB_TEXT_T:
break;
case PCB_LINE_T:
break;
case PCB_DIMENSION_T:
break;
case PCB_TARGET_T:
break;
case PCB_MODULE_TEXT_T:
module = (MODULE*) item->GetParent();
if( m_Guide->IgnoreMTextsMarkedNoShow() && !( (TEXTE_MODULE*) item )->IsVisible() )
goto exit;
if( module )
{
if( m_Guide->IgnoreMTextsOnCopper() && module->GetLayer()==LAYER_N_BACK )
goto exit;
if( m_Guide->IgnoreMTextsOnCmp() && module->GetLayer()==LAYER_N_FRONT )
goto exit;
if( m_Guide->IgnoreModulesVals() && item == &module->Value() )
goto exit;
if( m_Guide->IgnoreModulesRefs() && item == &module->Reference() )
goto exit;
}
break;
case PCB_MODULE_T:
module = (MODULE*) item;
break;
case PCB_MARKER_T:
marker = (MARKER_PCB*) item;
break;
default:
break;
}
// common tests:
if( module ) // true from case PCB_PAD_T, PCB_MODULE_TEXT_T, or PCB_MODULE_T
{
if( m_Guide->IgnoreModulesOnCu() && module->GetLayer()==LAYER_N_BACK )
goto exit;
if( m_Guide->IgnoreModulesOnCmp() && module->GetLayer()==LAYER_N_FRONT )
goto exit;
}
// Pads are not sensitive to the layer visibility controls.
// They all have their own separate visibility controls
// skip them if not visible
if( pad )
{
if( m_Guide->IgnorePads() )
goto exit;
if( ! pad_through )
{
if( m_Guide->IgnorePadsOnFront() && pad->IsOnLayer(LAYER_N_FRONT ) )
goto exit;
if( m_Guide->IgnorePadsOnBack() && pad->IsOnLayer(LAYER_N_BACK ) )
goto exit;
}
}
if( marker )
{
// Markers are not sensitive to the layer
if( marker->HitTest( m_RefPos ) )
Append( item );
goto exit;
}
if( item->IsOnLayer( m_Guide->GetPreferredLayer() ) || m_Guide->IgnorePreferredLayer() )
{
LAYER_NUM layer = item->GetLayer();
// Modules and their subcomponents: text and pads are not sensitive to the layer
// visibility controls. They all have their own separate visibility controls
// for vias, GetLayer() has no meaning, but IsOnLayer() works fine
if( via || module || pad || m_Guide->IsLayerVisible( layer ) || !m_Guide->IgnoreNonVisibleLayers() )
{
if( !m_Guide->IsLayerLocked( layer ) || !m_Guide->IgnoreLockedLayers() )
{
if( !item->IsLocked() || !m_Guide->IgnoreLockedItems() )
{
if( item->HitTest( m_RefPos ) )
{
Append( item );
goto exit;
}
}
}
}
}
if( m_Guide->IncludeSecondary() )
{
// for now, "secondary" means "tolerate any layer". It has
// no effect on other criteria, since there is a separate "ignore" control for
// those in the COLLECTORS_GUIDE
LAYER_NUM layer = item->GetLayer();
// Modules and their subcomponents: text and pads are not sensitive to the layer
// visibility controls. They all have their own separate visibility controls
if( via || module || pad || m_Guide->IsLayerVisible( layer ) || !m_Guide->IgnoreNonVisibleLayers() )
{
if( !m_Guide->IsLayerLocked( layer ) || !m_Guide->IgnoreLockedLayers() )
{
if( !item->IsLocked() || !m_Guide->IgnoreLockedItems() )
{
if( item->HitTest( m_RefPos ) )
{
Append2nd( item );
goto exit;
}
}
}
}
}
exit:
return SEARCH_CONTINUE; // always when collecting
}
void DialogEditModuleText::initDlg( )
{
SetFocus();
wxString msg;
if( m_module )
{
wxString format = m_ModuleInfoText->GetLabel();
msg.Printf( format,
GetChars( m_module->GetReference() ),
GetChars( m_module->GetValue() ),
m_module->GetOrientation() / 10.0 );
}
else
{
msg.Empty();
}
m_ModuleInfoText->SetLabel( msg );
switch( m_currentText->GetType() )
{
case TEXTE_MODULE::TEXT_is_VALUE:
m_TextDataTitle->SetLabel( _( "Value:" ) );
break;
case TEXTE_MODULE::TEXT_is_DIVERS:
m_TextDataTitle->SetLabel( _( "Text:" ) );
break;
default:
m_TextDataTitle->SetLabel( _( "Reference:" ) );
break;
}
m_Name->SetValue( m_currentText->GetText() );
m_Style->SetSelection( m_currentText->IsItalic() ? 1 : 0 );
AddUnitSymbol( *m_SizeXTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlX, m_currentText->GetSize().x );
AddUnitSymbol( *m_SizeYTitle );
PutValueInLocalUnits( *m_TxtSizeCtrlY, m_currentText->GetSize().y );
AddUnitSymbol( *m_PosXTitle );
PutValueInLocalUnits( *m_TxtPosCtrlX, m_currentText->GetPos0().x );
AddUnitSymbol( *m_PosYTitle );
PutValueInLocalUnits( *m_TxtPosCtrlY, m_currentText->GetPos0().y );
AddUnitSymbol( *m_WidthTitle );
PutValueInLocalUnits( *m_TxtWidthCtlr, m_currentText->GetThickness() );
double text_orient = m_currentText->GetOrientation();
NORMALIZE_ANGLE_90( text_orient );
if( (text_orient != 0) )
m_Orient->SetSelection( 1 );
if( !m_currentText->IsVisible() )
m_Show->SetSelection( 1 );;
}
/* Plot a copper layer or mask.
* Silk screen layers are not plotted here.
*/
void PlotStandardLayer( BOARD *aBoard, PLOTTER* aPlotter,
LAYER_MSK aLayerMask, const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
EDA_DRAW_MODE_T plotMode = aPlotOpt.GetMode();
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
// Draw footprint shapes without pads (pads will plotted later)
// We plot here module texts, but they are usually on silkscreen layer,
// so they are not plot here but plot by PlotSilkScreen()
// Plot footprints fields (ref, value ...)
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
if( ! itemplotter.PlotAllTextsModule( module ) )
{
wxLogMessage( _( "Your BOARD has a bad layer number for module %s" ),
GetChars( module->GetReference() ) );
}
}
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( BOARD_ITEM* item = module->GraphicalItems(); item; item = item->Next() )
{
if( ! (aLayerMask & GetLayerMask( item->GetLayer() ) ) )
continue;
switch( item->Type() )
{
case PCB_MODULE_EDGE_T:
itemplotter.Plot_1_EdgeModule( (EDGE_MODULE*) item );
break;
default:
break;
}
}
}
// Plot footprint pads
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
for( D_PAD* pad = module->Pads(); pad; pad = pad->Next() )
{
if( (pad->GetLayerMask() & aLayerMask) == 0 )
continue;
wxSize margin;
double width_adj = 0;
if( aLayerMask & ALL_CU_LAYERS )
width_adj = itemplotter.getFineWidthAdj();
switch( aLayerMask &
( SOLDERMASK_LAYER_BACK | SOLDERMASK_LAYER_FRONT |
SOLDERPASTE_LAYER_BACK | SOLDERPASTE_LAYER_FRONT ) )
{
case SOLDERMASK_LAYER_FRONT:
case SOLDERMASK_LAYER_BACK:
margin.x = margin.y = pad->GetSolderMaskMargin();
break;
case SOLDERPASTE_LAYER_FRONT:
case SOLDERPASTE_LAYER_BACK:
margin = pad->GetSolderPasteMargin();
break;
default:
break;
}
wxSize padPlotsSize;
padPlotsSize.x = pad->GetSize().x + ( 2 * margin.x ) + width_adj;
padPlotsSize.y = pad->GetSize().y + ( 2 * margin.y ) + width_adj;
// Don't draw a null size item :
if( padPlotsSize.x <= 0 || padPlotsSize.y <= 0 )
continue;
EDA_COLOR_T color = BLACK;
if( (pad->GetLayerMask() & LAYER_BACK) )
color = aBoard->GetVisibleElementColor( PAD_BK_VISIBLE );
if((pad->GetLayerMask() & LAYER_FRONT ) )
color = ColorFromInt( color | aBoard->GetVisibleElementColor( PAD_FR_VISIBLE ) );
// Temporary set the pad size to the required plot size:
wxSize tmppadsize = pad->GetSize();
pad->SetSize( padPlotsSize );
switch( pad->GetShape() )
{
case PAD_CIRCLE:
case PAD_OVAL:
if( aPlotOpt.GetSkipPlotNPTH_Pads() &&
(pad->GetSize() == pad->GetDrillSize()) &&
(pad->GetAttribute() == PAD_HOLE_NOT_PLATED) )
break;
// Fall through:
case PAD_TRAPEZOID:
case PAD_RECT:
default:
itemplotter.PlotPad( pad, color, plotMode );
break;
}
pad->SetSize( tmppadsize ); // Restore the pad size
}
}
// Plot vias on copper layers, and if aPlotOpt.GetPlotViaOnMaskLayer() is true,
// plot them on solder mask
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
const VIA* Via = dynamic_cast<const VIA*>( track );
if( !Via )
continue;
// vias are not plotted if not on selected layer, but if layer
// is SOLDERMASK_LAYER_BACK or SOLDERMASK_LAYER_FRONT,vias are drawn,
// only if they are on the corresponding external copper layer
int via_mask_layer = Via->GetLayerMask();
if( aPlotOpt.GetPlotViaOnMaskLayer() )
{
if( via_mask_layer & LAYER_BACK )
via_mask_layer |= SOLDERMASK_LAYER_BACK;
if( via_mask_layer & LAYER_FRONT )
via_mask_layer |= SOLDERMASK_LAYER_FRONT;
}
if( ( via_mask_layer & aLayerMask ) == 0 )
continue;
int via_margin = 0;
double width_adj = 0;
// If the current layer is a solder mask, use the global mask
// clearance for vias
if( ( aLayerMask & ( SOLDERMASK_LAYER_BACK | SOLDERMASK_LAYER_FRONT ) ) )
via_margin = aBoard->GetDesignSettings().m_SolderMaskMargin;
if( aLayerMask & ALL_CU_LAYERS )
width_adj = itemplotter.getFineWidthAdj();
int diameter = Via->GetWidth() + 2 * via_margin + width_adj;
// Don't draw a null size item :
if( diameter <= 0 )
continue;
EDA_COLOR_T color = aBoard->GetVisibleElementColor(VIAS_VISIBLE + Via->GetViaType());
// Set plot color (change WHITE to LIGHTGRAY because
// the white items are not seen on a white paper or screen
aPlotter->SetColor( color != WHITE ? color : LIGHTGRAY);
aPlotter->FlashPadCircle( Via->GetStart(), diameter, plotMode );
}
// Plot tracks (not vias) :
for( TRACK* track = aBoard->m_Track; track; track = track->Next() )
{
if( track->Type() == PCB_VIA_T )
continue;
if( (GetLayerMask( track->GetLayer() ) & aLayerMask) == 0 )
continue;
int width = track->GetWidth() + itemplotter.getFineWidthAdj();
aPlotter->SetColor( itemplotter.getColor( track->GetLayer() ) );
aPlotter->ThickSegment( track->GetStart(), track->GetEnd(), width, plotMode );
}
// Plot zones (outdated, for old boards compatibility):
for( TRACK* track = aBoard->m_Zone; track; track = track->Next() )
{
if( (GetLayerMask( track->GetLayer() ) & aLayerMask) == 0 )
continue;
int width = track->GetWidth() + itemplotter.getFineWidthAdj();
aPlotter->SetColor( itemplotter.getColor( track->GetLayer() ) );
aPlotter->ThickSegment( track->GetStart(), track->GetEnd(), width, plotMode );
}
// Plot filled ares
for( int ii = 0; ii < aBoard->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* zone = aBoard->GetArea( ii );
if( ( GetLayerMask(zone->GetLayer() ) & aLayerMask ) == 0 )
continue;
itemplotter.PlotFilledAreas( zone );
}
// Adding drill marks, if required and if the plotter is able to plot them:
if( aPlotOpt.GetDrillMarksType() != PCB_PLOT_PARAMS::NO_DRILL_SHAPE )
itemplotter.PlotDrillMarks();
}
/* Creates the plot for silkscreen layers
* Silkscreen layers have specific requirement for pads (not filled) and texts
* (with option to remove them from some copper areas (pads...)
*/
void PlotSilkScreen( BOARD *aBoard, PLOTTER* aPlotter, LAYER_MSK aLayerMask,
const PCB_PLOT_PARAMS& aPlotOpt )
{
BRDITEMS_PLOTTER itemplotter( aPlotter, aBoard, aPlotOpt );
itemplotter.SetLayerMask( aLayerMask );
// Plot edge layer and graphic items
itemplotter.PlotBoardGraphicItems();
// Plot footprint outlines :
itemplotter.Plot_Edges_Modules();
// Plot pads (creates pads outlines, for pads on silkscreen layers)
int layersmask_plotpads = aLayerMask;
// Calculate the mask layers of allowed layers for pads
if( !aPlotOpt.GetPlotPadsOnSilkLayer() ) // Do not plot pads on silk screen layers
layersmask_plotpads &= ~(SILKSCREEN_LAYER_BACK | SILKSCREEN_LAYER_FRONT );
if( layersmask_plotpads )
{
for( MODULE* Module = aBoard->m_Modules; Module; Module = Module->Next() )
{
for( D_PAD * pad = Module->Pads(); pad != NULL; pad = pad->Next() )
{
// See if the pad is on this layer
LAYER_MSK masklayer = pad->GetLayerMask();
if( (masklayer & layersmask_plotpads) == 0 )
continue;
EDA_COLOR_T color = ColorFromInt(0);
if( (layersmask_plotpads & SILKSCREEN_LAYER_BACK) )
color = aBoard->GetLayerColor( SILKSCREEN_N_BACK );
if((layersmask_plotpads & SILKSCREEN_LAYER_FRONT ) )
color = ColorFromInt( color | aBoard->GetLayerColor( SILKSCREEN_N_FRONT ) );
itemplotter.PlotPad( pad, color, LINE );
}
}
}
// Plot footprints fields (ref, value ...)
for( MODULE* module = aBoard->m_Modules; module; module = module->Next() )
{
if( ! itemplotter.PlotAllTextsModule( module ) )
{
wxLogMessage( _( "Your BOARD has a bad layer number for module %s" ),
GetChars( module->GetReference() ) );
}
}
// Plot filled areas
for( int ii = 0; ii < aBoard->GetAreaCount(); ii++ )
{
ZONE_CONTAINER* edge_zone = aBoard->GetArea( ii );
if( ( GetLayerMask( edge_zone->GetLayer() ) & aLayerMask ) == 0 )
continue;
itemplotter.PlotFilledAreas( edge_zone );
}
// Plot segments used to fill zone areas (outdated, but here for old boards
// compatibility):
for( SEGZONE* seg = aBoard->m_Zone; seg != NULL; seg = seg->Next() )
{
if( ( GetLayerMask( seg->GetLayer() ) & aLayerMask ) == 0 )
continue;
aPlotter->ThickSegment( seg->GetStart(), seg->GetEnd(), seg->GetWidth(),
itemplotter.GetMode() );
}
}
// Handles the selection of command events.
void PCB_EDIT_FRAME::Process_Special_Functions( wxCommandEvent& event )
{
int id = event.GetId();
LAYER_NUM itmp;
INSTALL_UNBUFFERED_DC( dc, m_canvas );
MODULE* module;
m_canvas->CrossHairOff( &dc );
switch( id ) // Some (not all ) edit commands must be finished or aborted
{
case wxID_CUT:
case wxID_COPY:
case ID_PCB_USER_GRID_SETUP:
case ID_TOOLBARH_PCB_SELECT_LAYER:
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
case ID_POPUP_PCB_FLIP_TEXTEPCB:
case ID_POPUP_PCB_COPY_TEXTEPCB:
case ID_POPUP_PCB_EDIT_TEXTEPCB:
case ID_POPUP_PCB_EDIT_MIRE:
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
case ID_POPUP_PCB_EDIT_TEXTMODULE:
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
case ID_POPUP_PCB_BEGIN_TRACK:
case ID_POPUP_PCB_END_TRACK:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_MICROVIA:
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
case ID_POPUP_PCB_FILL_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES:
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
case ID_POPUP_PCB_DELETE_ZONE:
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
case ID_POPUP_PCB_ADD_ZONE_CORNER:
case ID_POPUP_PCB_DELETE_TRACKSEG:
case ID_POPUP_PCB_DELETE_TRACK:
case ID_POPUP_PCB_DELETE_TRACKNET:
case ID_POPUP_PCB_FILL_ZONE:
case ID_POPUP_PCB_SELECT_LAYER:
case ID_POPUP_PCB_SELECT_CU_LAYER:
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
case ID_POPUP_PCB_BREAK_TRACK:
case ID_POPUP_PCB_EDIT_NET:
case ID_POPUP_PCB_EDIT_TRACK:
case ID_POPUP_PCB_EDIT_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
case ID_POPUP_PCB_LOCK_ON_TRACK:
case ID_POPUP_PCB_LOCK_OFF_TRACK:
case ID_POPUP_PCB_LOCK_ON_NET:
case ID_POPUP_PCB_LOCK_OFF_NET:
case ID_POPUP_DELETE_BLOCK:
case ID_POPUP_PLACE_BLOCK:
case ID_POPUP_ZOOM_BLOCK:
case ID_POPUP_FLIP_BLOCK:
case ID_POPUP_ROTATE_BLOCK:
case ID_POPUP_COPY_BLOCK:
case ID_POPUP_PCB_EDIT_DRAWING:
case ID_POPUP_PCB_GETINFO_MARKER:
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
if( m_canvas->IsMouseCaptured() )
{
m_canvas->EndMouseCapture();
}
// Should not be executed, just in case
if( GetScreen()->m_BlockLocate.GetCommand() != BLOCK_IDLE )
{
GetScreen()->m_BlockLocate.SetCommand( BLOCK_IDLE );
GetScreen()->m_BlockLocate.SetState( STATE_NO_BLOCK );
GetScreen()->m_BlockLocate.ClearItemsList();
}
if( GetToolId() == ID_NO_TOOL_SELECTED )
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
else
SetCursor( (wxStockCursor) m_canvas->GetDefaultCursor() );
break;
default: // Finish (abort) the command
if( m_canvas->IsMouseCaptured() )
m_canvas->CallEndMouseCapture( &dc );
if( GetToolId() != id )
{
if( m_lastDrawToolId != GetToolId() )
m_lastDrawToolId = GetToolId();
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
}
break;
}
switch( id ) // Execute command
{
case 0:
break;
case ID_OPEN_MODULE_EDITOR:
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, false );
if( !editor )
{
editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Show( true );
editor->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( editor->IsIconized() )
editor->Iconize( false );
*/
editor->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != editor )
editor->SetFocus();
}
}
break;
case ID_OPEN_MODULE_VIEWER:
{
FOOTPRINT_VIEWER_FRAME* viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, false );
if( !viewer )
{
viewer = (FOOTPRINT_VIEWER_FRAME*) Kiway().Player( FRAME_PCB_MODULE_VIEWER, true );
viewer->Show( true );
viewer->Zoom_Automatique( false );
}
else
{
/* not needed on linux, other platforms need this?
if( viewer->IsIconized() )
viewer->Iconize( false );
*/
viewer->Raise();
// Raising the window does not set the focus on Linux. This should work on
// any platform.
if( wxWindow::FindFocus() != viewer )
viewer->SetFocus();
}
}
break;
case ID_PCB_GLOBAL_DELETE:
InstallPcbGlobalDeleteFrame( wxDefaultPosition );
break;
case ID_POPUP_PLACE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_MOVE );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_COPY_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_COPY );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
m_canvas->SetAutoPanRequest( false );
HandleBlockPlace( &dc );
break;
case ID_POPUP_ZOOM_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ZOOM );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_DELETE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_DELETE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_ROTATE_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_ROTATE );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_POPUP_FLIP_BLOCK:
GetScreen()->m_BlockLocate.SetCommand( BLOCK_FLIP );
GetScreen()->m_BlockLocate.SetMessageBlock( this );
HandleBlockEnd( &dc );
break;
case ID_DRC_CONTROL:
m_drc->ShowDialog();
break;
case ID_GET_NETLIST:
InstallNetlistFrame( &dc );
break;
case ID_FIND_ITEMS:
InstallFindFrame();
break;
case ID_POPUP_CLOSE_CURRENT_TOOL:
SetToolID( ID_NO_TOOL_SELECTED, m_canvas->GetDefaultCursor(), wxEmptyString );
break;
case ID_POPUP_CANCEL_CURRENT_COMMAND:
break;
case ID_POPUP_PCB_END_LINE:
m_canvas->MoveCursorToCrossHair();
// EndSegment(&dc);
break;
case ID_POPUP_PCB_EDIT_TRACK:
if( GetCurItem() == NULL )
break;
Edit_Track_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_TRACKSEG:
if( GetCurItem() == NULL )
break;
Edit_TrackSegm_Width( &dc, (TRACK*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
OnModify();
break;
case ID_POPUP_PCB_EDIT_ALL_VIAS_AND_TRACK_SIZE:
if( GetCurItem() == NULL )
break;
{
int type = GetCurItem()->Type();
if( type == PCB_TRACE_T || type == PCB_VIA_T )
{
BOARD_CONNECTED_ITEM*item = (BOARD_CONNECTED_ITEM*) GetCurItem();
DIALOG_GLOBAL_EDIT_TRACKS_AND_VIAS dlg( this, item->GetNetCode() );
dlg.ShowModal();
}
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_BEGIN_TRACK:
m_canvas->MoveCursorToCrossHair();
OnHotkeyBeginRoute( &dc );
break;
case ID_POPUP_PCB_END_TRACK:
m_canvas->MoveCursorToCrossHair();
End_Route( (TRACK*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_PLACE_MOVED_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
break;
case ID_POPUP_PCB_SWITCH_TRACK_POSTURE:
/* change the position of initial segment when creating new tracks
* switch from _/ to -\ .
* If a track is in progress, it will be redrawn
*/
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
g_Alternate_Track_Posture = !g_Alternate_Track_Posture;
if( m_canvas->IsMouseCaptured() )
m_canvas->CallMouseCapture( &dc, wxDefaultPosition, false );
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
if( !IsMicroViaAcceptable() )
break;
// fall through
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem()->IsDragging() )
{
PlaceDraggedOrMovedTrackSegment( (TRACK*) GetCurItem(), &dc );
}
else
{
BOARD_DESIGN_SETTINGS &settings = GetDesignSettings();
VIATYPE_T v_type = settings.m_CurrentViaType;
switch( id )
{
case ID_POPUP_PCB_PLACE_BLIND_BURIED_VIA:
case ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA:
settings.m_CurrentViaType = VIA_BLIND_BURIED;
break;
case ID_POPUP_PCB_PLACE_MICROVIA:
settings.m_CurrentViaType = VIA_MICROVIA;
break;
default:
settings.m_CurrentViaType = VIA_THROUGH;
break;
}
// place via and switch layer.
if( id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_THROUGH_VIA ||
id == ID_POPUP_PCB_SELECT_CU_LAYER_AND_PLACE_BLIND_BURIED_VIA )
{
m_canvas->SetIgnoreMouseEvents( true );
wxPoint dlgPosition;
wxGetMousePosition( &dlgPosition.x, &dlgPosition.y );
LAYER_NUM layer = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS,
dlgPosition );
m_canvas->SetIgnoreMouseEvents( false );
m_canvas->MoveCursorToCrossHair();
if( getActiveLayer() != layer )
{
GetScreen()->m_Route_Layer_TOP = getActiveLayer();
GetScreen()->m_Route_Layer_BOTTOM = layer;
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
}
}
else
Other_Layer_Route( (TRACK*) GetCurItem(), &dc );
settings.m_CurrentViaType = v_type;
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh();
}
break;
case ID_POPUP_PCB_DELETE_TRACKSEG:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
SetCurItem( Delete_Segment( &dc, (TRACK*) GetCurItem() ) );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACK:
if( GetCurItem() == NULL )
break;
m_canvas->MoveCursorToCrossHair();
Delete_Track( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_DELETE_TRACKNET:
m_canvas->MoveCursorToCrossHair();
Delete_net( &dc, (TRACK*) GetCurItem() );
SetCurItem( NULL );
OnModify();
break;
case ID_POPUP_PCB_LOCK_ON_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACKSEG:
Attribut_Segment( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_LOCK_OFF_TRACK:
Attribut_Track( (TRACK*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_LOCK_ON_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), true );
break;
case ID_POPUP_PCB_LOCK_OFF_NET:
Attribut_net( &dc, ( (TRACK*) GetCurItem() )->GetNetCode(), false );
break;
case ID_POPUP_PCB_SETFLAGS_TRACK_MNU:
break;
case ID_POPUP_PCB_DELETE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() == NULL )
break;
{
SEGZONE* zsegm = (SEGZONE*) GetCurItem();
int netcode = zsegm->GetNetCode();
Delete_OldZone_Fill( zsegm );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
OnModify();
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_EDIT_ZONE_PARAMS:
Edit_Zone_Params( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL ); // Outlines can have changed
break;
case ID_POPUP_PCB_ZONE_DUPLICATE:
{
ZONE_CONTAINER* zone = (ZONE_CONTAINER*) GetCurItem();
duplicateZone( &dc, zone );
}
break;
case ID_POPUP_PCB_ZONE_ADD_SIMILAR_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Similar_Zone( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_ZONE_ADD_CUTOUT_ZONE:
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
Add_Zone_Cutout( &dc, (ZONE_CONTAINER*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_ZONE_CONTAINER:
case ID_POPUP_PCB_DELETE_ZONE_CUTOUT:
m_canvas->MoveCursorToCrossHair();
{
int netcode = ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode();
Delete_Zone_Contour( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
TestNetConnection( NULL, netcode );
SetMsgPanel( GetBoard() );
}
break;
case ID_POPUP_PCB_DELETE_ZONE_CORNER:
Remove_Zone_Corner( &dc, (ZONE_CONTAINER*) GetCurItem() );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_MOVE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), false );
break;
}
case ID_POPUP_PCB_DRAG_ZONE_OUTLINE_SEGMENT:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Drag_Outline_Edge( &dc, zone_cont, zone_cont->GetSelectedCorner() );
break;
}
case ID_POPUP_PCB_MOVE_ZONE_OUTLINES:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Outlines( &dc, zone_cont );
break;
}
case ID_POPUP_PCB_ADD_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
wxPoint pos = GetCrossHairPosition();
/* add corner between zone_cont->m_CornerSelection
* and zone_cont->m_CornerSelection+1
* and start move the new corner
*/
zone_cont->Draw( m_canvas, &dc, GR_XOR );
zone_cont->Outline()->InsertCorner( zone_cont->GetSelectedCorner(), pos.x, pos.y );
zone_cont->SetSelectedCorner( zone_cont->GetSelectedCorner() + 1 );
zone_cont->Draw( m_canvas, &dc, GR_XOR );
m_canvas->SetAutoPanRequest( true );
Start_Move_Zone_Corner( &dc, zone_cont, zone_cont->GetSelectedCorner(), true );
break;
}
case ID_POPUP_PCB_PLACE_ZONE_OUTLINES:
case ID_POPUP_PCB_PLACE_ZONE_CORNER:
{
m_canvas->MoveCursorToCrossHair();
ZONE_CONTAINER* zone_cont = (ZONE_CONTAINER*) GetCurItem();
End_Move_Zone_Corner_Or_Outlines( &dc, zone_cont );
m_canvas->SetAutoPanRequest( false );
break;
}
case ID_POPUP_PCB_FILL_ALL_ZONES:
m_canvas->MoveCursorToCrossHair();
Fill_All_Zones( this );
m_canvas->Refresh();
SetMsgPanel( GetBoard() );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_CURRENT_ZONE:
if( ( GetCurItem() )->Type() == PCB_ZONE_AREA_T )
{
ZONE_CONTAINER* zone_container = (ZONE_CONTAINER*) GetCurItem();
zone_container->UnFill();
TestNetConnection( NULL, zone_container->GetNetCode() );
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
}
SetCurItem( NULL );
break;
case ID_POPUP_PCB_REMOVE_FILLED_AREAS_IN_ALL_ZONES: // Remove all zones :
GetBoard()->m_Zone.DeleteAll(); // remove zone segments used to fill zones.
for( int ii = 0; ii < GetBoard()->GetAreaCount(); ii++ )
{
// Remove filled areas in zone
ZONE_CONTAINER* zone_container = GetBoard()->GetArea( ii );
zone_container->ClearFilledPolysList();
}
SetCurItem( NULL ); // CurItem might be deleted by this command, clear the pointer
TestConnections();
TestForActiveLinksInRatsnest( 0 ); // Recalculate the active ratsnest, i.e. the unconnected links
OnModify();
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_FILL_ZONE:
m_canvas->MoveCursorToCrossHair();
Fill_Zone( (ZONE_CONTAINER*) GetCurItem() );
TestNetConnection( NULL, ( (ZONE_CONTAINER*) GetCurItem() )->GetNetCode() );
SetMsgPanel( GetBoard() );
m_canvas->Refresh();
break;
case ID_POPUP_PCB_MOVE_TEXTEPCB_REQUEST:
StartMoveTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_DRAG_MODULE_REQUEST:
case ID_POPUP_PCB_MOVE_MODULE_REQUEST:
if( GetCurItem() == NULL )
break;
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
SetCrossHairPosition( module->GetPosition() );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, id == ID_POPUP_PCB_DRAG_MODULE_REQUEST );
break;
case ID_POPUP_PCB_GET_AND_MOVE_MODULE_REQUEST: // get module by name and move it
SetCurItem( GetModuleByName() );
module = (MODULE*) GetCurItem();
if( module == NULL )
break;
if( module->IsLocked() )
{
wxString msg = wxString::Format(
_( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
SendMessageToEESCHEMA( module );
m_canvas->MoveCursorToCrossHair();
StartMoveModule( module, &dc, false );
break;
case ID_POPUP_PCB_DELETE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
if( Delete_Module( (MODULE*) GetCurItem(), &dc, true ) )
{
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_ROTATE_MODULE_COUNTERCLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), m_rotationAngle, true );
break;
case ID_POPUP_PCB_ROTATE_MODULE_CLOCKWISE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple rotation, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_CHANGED, ((MODULE*)GetCurItem())->GetPosition() );
Rotate_Module( &dc, (MODULE*) GetCurItem(), -m_rotationAngle, true );
break;
case ID_POPUP_PCB_CHANGE_SIDE_MODULE:
m_canvas->MoveCursorToCrossHair();
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
module = (MODULE*) GetCurItem();
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "Footprint %s found, but it is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
// This is a simple flip, no other editing in progress
if( !GetCurItem()->IsMoving() )
SaveCopyInUndoList( GetCurItem(), UR_FLIPPED, ((MODULE*)GetCurItem())->GetPosition() );
Change_Side_Module( (MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_EDIT_MODULE_PRMS:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
InstallModuleOptionsFrame( (MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MODULE_WITH_MODEDIT:
// If the current Item is a pad, text module ...: Get its parent
if( GetCurItem()->Type() != PCB_MODULE_T )
SetCurItem( GetCurItem()->GetParent() );
if( !GetCurItem() || GetCurItem()->Type() != PCB_MODULE_T )
break;
if( GetCurItem()->GetTimeStamp() == 0 ) // Module Editor needs a non null timestamp
{
GetCurItem()->SetTimeStamp( GetNewTimeStamp() );
OnModify();
}
{
FOOTPRINT_EDIT_FRAME* editor = (FOOTPRINT_EDIT_FRAME*) Kiway().Player( FRAME_PCB_MODULE_EDITOR, true );
editor->Load_Module_From_BOARD( (MODULE*)GetCurItem() );
SetCurItem( NULL ); // the current module could be deleted by
editor->Show( true );
editor->Raise(); // Iconize( false );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DRAG_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, true );
break;
case ID_POPUP_PCB_MOVE_PAD_REQUEST:
module = (MODULE*) GetCurItem()->GetParent();
if( !module || module->Type() != PCB_MODULE_T )
break;
if( module->IsLocked() )
{
wxString msg;
msg.Printf( _( "The parent (%s) of the pad is locked" ),
module->GetReference().GetData() );
DisplayInfoMessage( this, msg );
break;
}
m_canvas->MoveCursorToCrossHair();
StartMovePad( (D_PAD*) GetCurItem(), &dc, false );
break;
case ID_POPUP_PCB_EDIT_PAD:
InstallPadOptionsFrame( (D_PAD*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
Import_Pad_Settings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_GLOBAL_IMPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
DlgGlobalChange_PadSettings( (D_PAD*) GetCurItem(), true );
break;
case ID_POPUP_PCB_EXPORT_PAD_SETTINGS:
m_canvas->MoveCursorToCrossHair();
Export_Pad_Settings( (D_PAD*) GetCurItem() );
break;
case ID_POPUP_PCB_DELETE_PAD:
SaveCopyInUndoList( GetCurItem()->GetParent(), UR_CHANGED );
DeletePad( (D_PAD*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_TEXTMODULE:
InstallTextModOptionsFrame( (TEXTE_MODULE*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_RESET_TEXT_SIZE:
ResetTextSize( GetCurItem(), &dc );
break;
case ID_POPUP_PCB_MOVE_TEXTMODULE_REQUEST:
m_canvas->MoveCursorToCrossHair();
StartMoveTexteModule( (TEXTE_MODULE*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_ROTATE_TEXTMODULE:
RotateTextModule( (TEXTE_MODULE*) GetCurItem(),
&dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTMODULE:
DeleteTextModule( (TEXTE_MODULE*) GetCurItem() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_LAYER:
itmp = SelectLayer( getActiveLayer() );
if( itmp >= 0 )
{
// if user changed colors and we are in high contrast mode, then redraw
// because the PAD_SMD pads may change color.
if( DisplayOpt.ContrastModeDisplay && getActiveLayer() != itmp )
{
m_canvas->Refresh();
}
setActiveLayer( itmp );
}
m_canvas->MoveCursorToCrossHair();
break;
case ID_AUX_TOOLBAR_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
break;
case ID_POPUP_PCB_SELECT_NO_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_SELECT_CU_LAYER:
itmp = SelectLayer( getActiveLayer(), ALL_NO_CU_LAYERS );
if( itmp >= 0 )
setActiveLayer( itmp );
break;
case ID_POPUP_PCB_SELECT_LAYER_PAIR:
SelectCopperLayerPair();
m_canvas->MoveCursorToCrossHair();
break;
case ID_TOOLBARH_PCB_SELECT_LAYER:
setActiveLayer( m_SelLayerBox->GetLayerSelection() );
if( DisplayOpt.ContrastModeDisplay )
m_canvas->Refresh( true );
break;
case ID_POPUP_PCB_EDIT_TEXTEPCB:
InstallTextPCBOptionsFrame( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_ROTATE_TEXTEPCB:
Rotate_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_COPY_TEXTEPCB:
CreateTextePcb( &dc, (TEXTE_PCB*) GetCurItem() );
m_canvas->MoveCursorToCrossHair();
m_canvas->SetAutoPanRequest( true );
break;
case ID_POPUP_PCB_FLIP_TEXTEPCB:
FlipTextePcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_TEXTEPCB:
Delete_Texte_Pcb( (TEXTE_PCB*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_MIRE_REQUEST:
BeginMoveTarget( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_EDIT_MIRE:
ShowTargetOptionsDialog( (PCB_TARGET*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MIRE:
m_canvas->MoveCursorToCrossHair();
DeleteTarget( (PCB_TARGET*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_DELETE_DIMENSION:
m_canvas->MoveCursorToCrossHair();
DeleteDimension( (DIMENSION*) GetCurItem(), &dc );
SetCurItem( NULL );
break;
case ID_POPUP_PCB_EDIT_DIMENSION:
ShowDimensionPropertyDialog( (DIMENSION*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_TEXT_DIMENSION_REQUEST:
BeginMoveDimensionText( (DIMENSION*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_DELETE_DRAWING:
Delete_Segment_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_MARKER:
RemoveStruct( GetCurItem(), &dc );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_GETINFO_MARKER:
if( GetCurItem() && GetCurItem()->Type() == PCB_MARKER_T )
( (MARKER_PCB*) GetCurItem() )->DisplayMarkerInfo( this );
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_DELETE_DRAWING_LAYER:
if( GetCurItem()->GetFlags() != 0 )
break;
Delete_Drawings_All_Layer( GetCurItem()->GetLayer() );
SetCurItem( NULL );
m_canvas->MoveCursorToCrossHair();
m_canvas->Refresh();
break;
case ID_POPUP_PCB_EDIT_DRAWING:
#ifndef USE_WX_OVERLAY
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), &dc );
#else
// #1277772 - Draw into dialog converted in refresh request
InstallGraphicItemPropertiesDialog( (DRAWSEGMENT*) GetCurItem(), NULL );
m_canvas->Refresh();
#endif
m_canvas->MoveCursorToCrossHair();
break;
case ID_POPUP_PCB_MOVE_DRAWING_REQUEST:
m_canvas->MoveCursorToCrossHair();
Start_Move_DrawItem( (DRAWSEGMENT*) GetCurItem(), &dc );
break;
case ID_POPUP_PCB_STOP_CURRENT_DRAWING:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
End_Edge( (DRAWSEGMENT*) GetCurItem(), &dc );
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_STOP_CURRENT_EDGE_ZONE:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( End_Zone( &dc ) )
SetCurItem( NULL );
}
m_canvas->SetAutoPanRequest( false );
break;
case ID_POPUP_PCB_DELETE_ZONE_LAST_CREATED_CORNER:
m_canvas->MoveCursorToCrossHair();
if( GetCurItem() && (GetCurItem()->IsNew()) )
{
if( Delete_LastCreatedCorner( &dc ) == 0 ) // No more segment in outline,
SetCurItem( NULL );
}
break;
case ID_POPUP_PCB_MOVE_TRACK_SEGMENT:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT:
case ID_POPUP_PCB_MOVE_TRACK_NODE:
m_canvas->MoveCursorToCrossHair();
StartMoveOneNodeOrSegment( (TRACK*) GetScreen()->GetCurItem(), &dc, id );
break;
case ID_POPUP_PCB_DRAG_TRACK_SEGMENT_KEEP_SLOPE:
m_canvas->MoveCursorToCrossHair();
Start_DragTrackSegmentAndKeepSlope( (TRACK*) GetScreen()->GetCurItem(), &dc );
break;
case ID_POPUP_PCB_BREAK_TRACK:
m_canvas->MoveCursorToCrossHair();
{
TRACK* track = (TRACK*) GetScreen()->GetCurItem();
wxPoint pos = GetCrossHairPosition();
track->Draw( m_canvas, &dc, GR_XOR );
PICKED_ITEMS_LIST itemsListPicker;
TRACK* newtrack = GetBoard()->CreateLockPoint( pos, track, &itemsListPicker );
SaveCopyInUndoList( itemsListPicker, UR_UNSPECIFIED );
track->Draw( m_canvas, &dc, GR_XOR );
newtrack->Draw( m_canvas, &dc, GR_XOR );
// compute the new ratsnest, because connectivity could change
TestNetConnection( &dc, track->GetNetCode() );
}
break;
case ID_MENU_PCB_CLEAN:
Clean_Pcb();
break;
case ID_MENU_PCB_SWAP_LAYERS:
Swap_Layers( event );
break;
case ID_PCB_USER_GRID_SETUP:
InvokeDialogGrid();
break;
case ID_POPUP_PCB_DISPLAY_FOOTPRINT_DOC:
{
wxConfigBase* cfg = Pgm().CommonSettings();
cfg->Read( wxT( "module_doc_file" ), g_DocModulesFileName );
GetAssociatedDocument( this, g_DocModulesFileName, &Kiface().KifaceSearch() );
}
break;
case ID_MENU_ARCHIVE_NEW_MODULES:
ArchiveModulesOnBoard( true );
break;
case ID_MENU_ARCHIVE_ALL_MODULES:
ArchiveModulesOnBoard( false );
break;
case ID_GEN_IMPORT_DXF_FILE:
InvokeDXFDialogImport( this );
m_canvas->Refresh();
break;
default:
wxString msg;
msg.Printf( wxT( "PCB_EDIT_FRAME::Process_Special_Functions() unknown event id %d" ),
id );
DisplayError( this, msg );
break;
}
m_canvas->CrossHairOn( &dc );
m_canvas->SetIgnoreMouseEvents( false );
}