void mainloopalgorithms(void) {
if (synth.getNoteCount() > 0) {
message = synth.extractNote();
oldnote = checkForSquelch(message, memory, mintime, maxtime, t_time);
if (!oldnote || sstate == 0) {
cout << "New note from performer: " << message << endl;
if (message.is_note_on()) {
message.p1() += 7;
outvel = message.p2() + veladd;
if (outvel > 127) { outvel = 127; }
synth.send(message.p0(), message.p1(), outvel);
message.time = t_time;
message.p2() = outvel;
memory.insert(message);
} else if (message.is_note_off()) {
message.p1() += 7;
synth.send(message.p0(), message.p1(), message.p2());
message.time = t_time;
memory.insert(message);
}
} else {
cout << "Feedback note from piano: " << message << endl;
}
}
}
void sillyKeyboard(int key, int chan /* = 0 */) {
static int octave = 4;
static int newkey = 0;
static Voice voice;
static MidiMessage message;
// check to see if adjusting the octave:
if (isdigit(key)) {
octave = key - '0';
return;
}
switch (key) {
case 'z': newkey = 12 * octave + 0; break; // C
case 's': newkey = 12 * octave + 1; break; // C#
case 'x': newkey = 12 * octave + 2; break; // D
case 'd': newkey = 12 * octave + 3; break; // D#
case 'c': newkey = 12 * octave + 4; break; // E
case 'v': newkey = 12 * octave + 5; break; // F
case 'g': newkey = 12 * octave + 6; break; // F#
case 'b': newkey = 12 * octave + 7; break; // G
case 'h': newkey = 12 * octave + 8; break; // G#
case 'n': newkey = 12 * octave + 9; break; // A
case 'j': newkey = 12 * octave + 10; break; // A#
case 'm': newkey = 12 * octave + 11; break; // B
case ',': newkey = 12 * octave + 12; break; // C
case 'l': newkey = 12 * octave + 12; break; // C#
case '.': newkey = 12 * octave + 12; break; // D
case '\'': newkey = 12 * octave + 12; break; // D#
case '/': newkey = 12 * octave + 12; break; // E
default: return; // don't do anything if not a key
}
newkey = limit(newkey, 0, 127);
// put note-off message in synth's input buffer:
message.time = t_time;
message.p0() = 0x90 | voice.getChan();
message.p1() = voice.getKey();
message.p2() = 0;
synth.insert(message);
// turn off the last note:
voice.off();
// set parameters for next note-on:
voice.setChan(chan & 0x0f); // limit channel to range from 0 to 15
voice.setVel(rand() % 127 +1); // random attack in range from 1 to 127
voice.setKey(newkey); // use the newly selected key number
// play the MIDI note:
voice.play();
// insert the played note into synth's input MIDI buffer:
message.command() = 0x90 | voice.getChan();
message.p1() = voice.getKey();
message.p2() = voice.getVel();
synth.insert(message);
}
void processMidiCommand(MidiMessage& message) {
if (message.p0() != 0x90 || message.p2() == 0) {
return;
}
switch (message.p1()) {
case 60: // Middle C = beat
keyboardchar(' ');
break;
case 61: // C# = amplitude control
{
double amp = performance.getAmp();
amp = amp * message.p2() / 64;
if (amp < 0) {
amp = 0;
} else if (amp > 127) {
amp = 127;
}
performance.setAmp((int)amp);
}
break;
case 71: // B = 1 beat tempo follow
keyboardchar('1');
break;
case 72: // C = 2 beat tempo follow
keyboardchar('2');
break;
case 73: // C# = 3 beat tempo follow
keyboardchar('3');
break;
case 74: // D = 4 beat tempo follow
keyboardchar('4');
break;
case 79: // G = constant tempo follow
keyboardchar('9');
break;
case 80: // G# = automatic
keyboardchar('0');
break;
case 62: // amplitude decrease
keyboardchar('[');
break;
case 63: // amplitude increase
keyboardchar(']');
break;
case 64: // tempo decrease
keyboardchar('-');
break;
case 65: // tempo increase
keyboardchar('=');
break;
}
}
void mainloopalgorithms(void) {
while (synth.getNoteCount() > 0) {
noteMessage = synth.extractNote();
if (noteMessage.p2() != 0) { // ignore note off commands
synth.play(0, shadowNote, 0); // turn off last note
shadowNote = noteMessage.p1() + shadowSide * shadowDistance;
if (shadowNote > 0 && shadowNote < 128) {
synth.play(0, shadowNote, noteMessage.p2());
} else {
shadowNote = 0;
}
}
}
}
void processNote(MidiMessage& message) {
int velocity = message.p2();
int key = message.p1();
int channel = message.p0() & 0x0f;
int state = 1;
int duration = 0;
if (((message.p0() & 0xf0) == 0x80) || velocity == 0) {
state = 0;
}
if (key == A0) {
cout << "A0 Triggered" << endl;
for (int i=0; i<decaystates.getSize(); i++) {
decaystates[i] *= -1.0;
}
return;
}
if (state == 1) {
notestates[key] = message.time;
onvels[key] = velocity;
} else {
if (notestates[key] == 0) {
// do nothing
} else {
duration = message.time - notestates[key];
if (decaystates[key] == 0.0) {
createDecay(channel, key, duration, onvels[key]);
}
}
notestates[key] = 0;
}
}
void mainloopalgorithms(void) {
eventBuffer.checkPoll(); // see if any notes to play
while (synth.getNoteCount() > 0) {
message = synth.extractNote();
if (message.p2() != 0) {
lastnotes.insert(message.p1());
lasttimes.insert(message.time);
distancee = lastnotes[0] - lastnotes[1];
duration = lasttimes[0] - lasttimes[1];
channel = 0x0f & message.p0();
if (distancee != 0) {
playgliss(message.p1(), message.p2(), channel, duration, distancee);
}
}
}
}
void sendData(MidiMessage& m, MidiOutPort& output,
MidiInput& input) {
int count = m.getParameterCount();
if (count >= 0 && count <= 2) {
if (count >= 0) output.rawsend(m.p0());
if (count >= 1) output.rawsend(m.p0(), m.p1());
if (count >= 2) output.rawsend(m.p0(), m.p1(), m.p2());
}
}
void mainloopalgorithms(void) {
if (synth.getNoteCount() > 0) {
nextActionTime = t_time;
message = synth.extractNote();
if (message.p2() == 0) { // note off
keyCount--;
if (keyCount < 0) {
keyCount = 0;
}
switch (message.p1()) {
case C3: lastOffTime[1] = t_time; break;
case D3: lastOffTime[2] = t_time; break;
case E3: lastOffTime[3] = t_time; break;
case F3: lastOffTime[4] = t_time; break;
case G3: lastOffTime[5] = t_time; break;
case C4: lastOffTime[6] = t_time; break;
case D4: lastOffTime[7] = t_time; break;
case E4: lastOffTime[8] = t_time; break;
case F4: lastOffTime[9] = t_time; break;
case G4: lastOffTime[10] = t_time; break;
}
} else { // note on
keyCount++;
keysOn.insert(message.p1());
onKey2 = onKey1;
switch (message.p1()) {
case C3: lastOnTime[1] = t_time; onKey1 = 1; break;
case D3: lastOnTime[2] = t_time; onKey1 = 2; break;
case E3: lastOnTime[3] = t_time; onKey1 = 3; break;
case F3: lastOnTime[4] = t_time; onKey1 = 4; break;
case G3: lastOnTime[5] = t_time; onKey1 = 5; break;
case C4: lastOnTime[6] = t_time; onKey1 = 6; break;
case D4: lastOnTime[7] = t_time; onKey1 = 7; break;
case E4: lastOnTime[8] = t_time; onKey1 = 8; break;
case F4: lastOnTime[9] = t_time; onKey1 = 9; break;
case G4: lastOnTime[10] = t_time; onKey1 = 10; break;
}
}
}
if (nextActionTime + repeatRate <= t_time) {
nextActionTime = t_time;
}
event = makeEventDecision();
if (event > 0) {
if (shift) {
event = toupper(event);
}
cout << (char)event << flush;
}
}
int main(void) {
MidiInput midiin;
MidiOutput midiout;
midiout.setPort(0);
midiout.open();
midiin.setPort(0);
midiin.open();
MidiMessage message;
int sysexloc;
unsigned char *sysexdata = NULL;
int sysexsize = 0;
int i;
int running = 1;
cout << "sysexio -- display and echo SYSEX messages from MIDI input" << endl;
cout << "Press Middle C to quit." << endl;
while (running) {
if (midiin.getCount() > 0) {
message = midiin.extract();
if (message.p0() == 0xf0) {
sysexloc = message.p1();
sysexdata = midiin.getSysex(sysexloc);
sysexsize = midiin.getSysexSize(sysexloc);
// print out the sysex data to the screen:
for (i=0; i<sysexsize; i++) {
cout << hex << (int)sysexdata[i] << " ";
if ((i + 1) % 30 == 0) {
cout << endl;
}
}
cout << endl;
// Now echo the messages to MIDI output (as a demo
// for how to send Sysex outputs)
midiout.rawsend(sysexdata, sysexsize);
// As a courtesy, mark the midiin sysex buffer free
// but this is not necessay (it will be erased when
// more space is needed for storing a sysex.
midiin.clearSysex(sysexloc);
} else if ((message.p0() & 0xf0) == 0x90) {
// Exit the program when a middle C note is pressed.
if (message.p1() == 60 && message.p2() > 0) {
running = 0;
}
}
}
}
return 0;
}
void mainloopalgorithms(void) {
while (synth.getNoteCount() > 0) {
message = synth.extractNote();
if (message.is_note_off()) {
continue;
}
returnpitch = message.p1();
returnvelocity = message.p2();
// returntime = message.time;
returntime = t_time;
dtime = (short)(returntime - outtimes[returnpitch]);
if (dtime > 500) { // ignore return times which take more than 0.5 sec
continue;
}
vchange = returnvelocity - outvels[returnpitch];
velchange[returnpitch][outvels[returnpitch]].append(vchange);
deltatimes[returnpitch][outvels[returnpitch]].append(dtime);
}
if (!playstate) {
return;
}
if (nextnotetime <= t_time) {
currentnote += 11;
if (currentnote > 127) {
currentnote -= 127;
}
if (currentnote < A0 || currentnote > C8) {
return;
}
velocity = rand() % 127 + 1; // random velocity between 1 and 127
voices[currvoice].off();
outvels[currentnote] = velocity;
outtimes[currentnote] = mainTimer.getTime();
voices[currvoice++].play(0, currentnote, velocity);
if (currvoice >= maxvoices) {
currvoice = 0;
}
notecount++;
nextnotetime = t_time + duration;
}
}
void processKeyboard(void) {
MidiMessage message;
int key;
int vel;
int command;
while (synth.getNoteCount() > 0) {
message = synth.extractNote();
command = message.p0();
key = message.p1();
vel = message.p2();
if (vel == 0 || (command & 0xf0 == 0x80)) {
// note-off command section
long duration = t_time - performerNotes[key];
durations.insert(duration);
durtimes.insert(t_time);
performerNotes[key] = 0;
performerPC[key%12]--;
if (performerPC[key%12] < 0) {
performerPC[key%12] = 0;
}
} else { // note-on command
performerNotes[key] = t_time;
performerPC[key%12]++;
performerPCHistory[key%12]++;
keys.insert(key);
keytimes.insert(t_time);
volumes.insert(vel);
voltimes.insert(t_time);
} // end of the note-on command section
} // end of the while loop for processing notes from the performer
// update the time that the performer last play a note on/off:
lastPerformerTime = t_time;
updatePerformRegions();
updateDuration();
updateVolume();
}
void initialization(void) {
batonTimer.setPeriod(50); // time to get new state of baton
offTimer.setPeriod(200); // time to check buffer for forgetting
controlDisplayTimer.setPeriod(200); // time to check buffer for forgetting
// set the voice channels all to be 0 for the disklavier and so
// the channels do not have to be specified when playing the note.
for (int i=0; i<MAXVOICES; i++) {
voice[i].setChannel(0);
}
computer.setChannel(0);
computerMessage.time = t_time;
computerMessage.p0() = 0x90;
computerMessage.p1() = 0;
computerMessage.p2() = 0;
keys.setSize(1000); // store keys for memory of previous notes
keytimes.setSize(1000); // note times for keys buffer
volumes.setSize(1000); // duration of notes being held by performer
voltimes.setSize(1000); // duration of notes being held by performer
durations.setSize(1000); // duration of notes being held by performer
durtimes.setSize(1000); // duration of notes being held by performer
}
void processNote(MidiMessage message, int seqLength, int direction) {
static Array<char> notes;
static Array<char> velocities;
static Array<int> durations;
static Array<int> iois;
static Array<int> ontimes;
static CircularBuffer<int> attacktimes;
static int init = 0;
static TumbleParameters temparam;
char vel;
if (!init) {
attacktimes.setSize(256);
attacktimes.reset();
notes.setSize(0);
velocities.setSize(0);
durations.setSize(0);
iois.setSize(0);
ontimes.setSize(128);
ontimes.zero();
init = 1;
}
char note;
int deltatime;
int ioi0;
int ioix;
if (message.is_note_on()) {
attacktimes.insert(message.time);
// check to see if the ioi is in the correct range
if (notes.getSize() == 0) {
// no notes yet, so don't know the first ioi
} else {
deltatime = attacktimes[0] - attacktimes[1];
iois.append(deltatime);
}
if (iois.getSize() > 1) {
ioi0 = iois[0];
ioix = iois[iois.getSize()-1];
if ((ioix < ioi0 * tolerance) || (ioix > ioi0 / tolerance)) {
goto resettrigger;
}
}
// at this point the note can be added to the sequence
if (notes.getSize() + 1 >= seqLength) {
// time to trigger an algorithm
if (durations.getSize() < notes.getSize()) {
// if the last note has not yet been turned off, approximate dur.
deltatime = iois[iois.getSize()-1];
durations.append(deltatime);
}
int i;
for (i=0; i<seqLength; i++) {
temparam.v[i] = velocities[i];
temparam.i[i] = iois[i];
temparam.d[i] = durations[i];
temparam.n[i] = notes[i] - notes[0];
}
temparam.n[0] = message.p1() - notes[0];
temparam.current = message.p1();
temparam.pos = 1;
temparam.max = seqLength;
temparam.active = 1;
startAlgorithm(temparam);
goto resettrigger;
} else {
// add the note info to the algorithm pile
note = message.p1();
notes.append(note);
vel = message.p2();
velocities.append(vel);
attacktimes[message.p1()] = message.time;
}
} else if (message.is_note_off()) {
if (notes.getSize() > 0) {
if (notes[notes.getSize()-1] == message.p1()) {
deltatime = message.time - ontimes[message.p1()];
durations.append(deltatime);
} else {
cout << "A funny error ocurred" << endl;
}
}
return;
resettrigger:
attacktimes.setSize(0);
notes.setSize(0);
velocities.setSize(0);
durations.setSize(0);
iois.setSize(0);
if (message.is_note_on()) {
note = message.p1();
notes.append(note);
ontimes[message.p1()] = message.time;
vel = message.p2();
velocities.append(vel);
}
}
//////////////////////////////
//
// startAlgorithm -- start playing the tumble algorithm. Inserts a
// FunctionEvent into the eventBuffer which plays the tumble
// algorithm sequence. The algorithm will die after the notes
// fall off of the 88-note keyboard.
//
}
void RadioBaton::interpretCommand(MidiMessage aMessage) {
ushort value; // for the buff value receive commands
if (aMessage.command() == BAT_MIDI_COMMAND) {
switch (aMessage.p1()) {
case BAT_STICK1_RESPONSE_X: // stick 1 responding to poll; x
s1ps(aMessage.time);
s1pd(DATA_X, aMessage.p2());
break;
case BAT_STICK1_RESPONSE_Y: // stick 1 responding to poll; y
s1pd(DATA_Y, aMessage.p2());
break;
case BAT_STICK1_RESPONSE_Z: // stick 1 responding to poll; z
s1pd(DATA_Z, aMessage.p2());
break;
case BAT_STICK2_RESPONSE_X: // stick 2 responding to poll; x
s2ps(aMessage.time);
s2pd(DATA_X, aMessage.p2());
break;
case BAT_STICK2_RESPONSE_Y: // stick 2 responding to poll; y
s2pd(DATA_Y, aMessage.p2());
break;
case BAT_STICK2_RESPONSE_Z: // stick 2 responding to poll; z
s2pd(DATA_Z, aMessage.p2());
break;
case BAT_POT1_RESPONSE: // pot 1 responding to poll
d1p = aMessage.p2(); // update global state variable
dial1position();
recordState(aMessage.time, DIAL1RECORD, d1p);
d1pb.insert(aMessage.p2());
break;
case BAT_POT2_RESPONSE: // pot 2 responding to poll
d2p = aMessage.p2(); // update global state variable
dial2position();
recordState(aMessage.time, DIAL2RECORD, d2p);
d2pb.insert(aMessage.p2());
break;
case BAT_POT3_RESPONSE: // pot 3 responding to poll
d3p = aMessage.p2(); // update global state variable
dial3position();
recordState(aMessage.time, DIAL3RECORD, d3p);
d3pb.insert(aMessage.p2());
break;
case BAT_POT4_RESPONSE: // pot 4 responding to poll
d4p = aMessage.p2(); // update global state variable
dial4position();
recordState(aMessage.time, DIAL4RECORD, d4p);
d4pb.insert(aMessage.p2());
break;
case BAT_STICK1_TRIGGER: // stick 1 got triggered
s1ts(aMessage.time);
s1td(DATA_W, aMessage.p2());
break;
case BAT_STICK1_TRIG_X: // stick 1 got triggered
s1td(DATA_X, aMessage.p2());
break;
case BAT_STICK1_TRIG_Y: // stick 1 got triggered
s1td(DATA_Y, aMessage.p2());
break;
case BAT_STICK2_TRIGGER: // stick 2 got triggered
s2ts(aMessage.time);
s2td(DATA_W, aMessage.p2());
break;
case BAT_STICK2_TRIG_X: // stick 2 got triggered
s2td(DATA_X, aMessage.p2());
break;
case BAT_STICK2_TRIG_Y: // stick 2 got triggered
s2td(DATA_Y, aMessage.p2());
break;
case BAT_BUTTON_FOOT_TRIGGER: // button or pedal was triggered
switch (aMessage.p2()) {
case BAT_B14p_TRIGGER: // B14+ button pressed
b14pt = aMessage.time;
b14ptb.insert(b14pt);
recordState(aMessage.time, BUTTON1RECORD);
b14plustrig();
break;
case BAT_B15p_TRIGGER: // B15+ button pressed
b15pt = aMessage.time;
recordState(aMessage.time, BUTTON2RECORD);
b15plustrig();
b15ptb.insert(b15pt);
break;
case BAT_B14m_DOWN_TRIGGER: // B14- pedal was depressed
b14mdt = aMessage.time;
b14mdtb.insert(b14mdt);
recordState(b14mdt, FOOTPEDAL1RECORD, 1);
b14minusdowntrig();
break;
case BAT_B14m_UP_TRIGGER: // B14- pedal was released
b14mut = aMessage.time;
b14mutb.insert(b14mut);
recordState(b14mut, FOOTPEDAL1RECORD, 0);
b14minusuptrig();
break;
case BAT_B15m_DOWN_TRIGGER: // B15- pedal was depressed
b15mdt = aMessage.time;
b15mdtb.insert(b15mdt);
recordState(b15mut, FOOTPEDAL2RECORD, 1);
b15minusdowntrig();
break;
case BAT_B15m_UP_TRIGGER: // B15- pedal was released
b15mut = aMessage.time;
b15mutb.insert(b15mut);
recordState(b15mut, FOOTPEDAL2RECORD, 0);
b15minusuptrig();
break;
}
break;
case BAT_SEND:
// ignore this command
break;
default:
if (errorQ) {
cerr << "Baton command not recognized: 0x" << hex
<< (int)aMessage.command() << dec
<< ", param1 = " << (int)aMessage.p1()
<< ", param2 = " << (int)aMessage.p2()
<< endl;
}
} // end of switch (aMessage.command())
} // end of if a baton command (0xa0)
else if (aMessage.command() == 0xa1) {
// do nothing: old calibration message
} else if (aMessage.command() == 0xa2) {
// do nothing: old calibration message
} else if (aMessage.command() == 0xa3) {
// do nothing: old calibration message
} else if (aMessage.command() == 0xa4) {
// do nothing: old calibration message
}
// take care of buf data
else if (aMessage.command() == 0xa5) {
// if p1 is not in the range from 0 to 15 then ignore the error:
if (aMessage.p1() > 15) return;
completeBufQ[aMessage.p1()] = 0;
value = (ushort)(aMessage.p2() & 0x000f);
buf[aMessage.p1()] &= 0x0fff;
buf[aMessage.p1()] |= (value << 12);
} else if (aMessage.command() == 0xa6) {
// if p1 is not in the range from 0 to 15 then ignore the error:
if (aMessage.p1() > 15) return;
value = (ushort)(aMessage.p2() & 0x000f);
buf[aMessage.p1()] &= 0xf0ff;
buf[aMessage.p1()] |= (value << 8);
} else if (aMessage.command() == 0xa7) {
// if p1 is not in the range from 0 to 15 then ignore the error:
if (aMessage.p1() > 15) return;
value = (ushort)(aMessage.p2() & 0x000f);
buf[aMessage.p1()] &= 0xff0f;
buf[aMessage.p1()] |= (value << 4);
} else if (aMessage.command() == 0xa8) {
// if p1 is not in the range from 0 to 15 then ignore the error:
if (aMessage.p1() > 15) return;
value = (ushort)(aMessage.p2() & 0x000f);
buf[aMessage.p1()] &= 0xfff0;
buf[aMessage.p1()] |= value;
completeBufQ[aMessage.p1()] = 1;
// record buffer element to file if recording
// NOTE: have to figure out what to put in the time slots below; 0 for now.
switch (aMessage.p1()) {
case 0: recordState(timer.getTime(), ANTENNA0RECORD, buf[0]); break;
case 1: recordState(timer.getTime(), ANTENNA1RECORD, buf[1]); break;
case 2: recordState(timer.getTime(), ANTENNA2RECORD, buf[2]); break;
case 3: recordState(timer.getTime(), ANTENNA3RECORD, buf[3]); break;
case 4: recordState(timer.getTime(), ANTENNA4RECORD, buf[4]); break;
case 5: recordState(timer.getTime(), POT4RECORD, buf[5]); break;
case 6: recordState(timer.getTime(), ANTENNA5RECORD, buf[6]); break;
case 7: recordState(timer.getTime(), ANTENNA6RECORD, buf[7]); break;
case 8: recordState(timer.getTime(), ANTENNA7RECORD, buf[8]); break;
case 9: recordState(timer.getTime(), ANTENNA8RECORD, buf[9]); break;
case 10: recordState(timer.getTime(), ANTENNA9RECORD, buf[10]); break;
case 11: recordState(timer.getTime(), POT1RECORD, buf[11]); break;
case 12: recordState(timer.getTime(), POT2RECORD, buf[12]); break;
case 13: recordState(timer.getTime(), POT3RECORD, buf[13]); break;
case 14: recordState(timer.getTime(), B14RECORD, buf[14]); break;
case 15: recordState(timer.getTime(), B15RECORD, buf[15]); break;
}
}
else if (aMessage.command() == 0xaa) { // miditest
currentmidi = aMessage.p2();
if (currentmidi != 0) {
if (currentmidi != lastmidi + 1) {
midierrors++;
}
lastmidi = currentmidi;
miditests++;
}
} else if (aMessage.command() == 0xab) { // miditest
currentmidi = aMessage.p2();
if (currentmidi != 0) {
if (currentmidi != lastmidi+1) {
midierrors++;
}
lastmidi = currentmidi;
miditests++;
}
}
// All other MIDI commands are ignored. Maybe they are
// for/from a synthesizer or something like that.
}
void mainloopalgorithms(void) {
if (comparestate && notetimer.expired()) {
if (notetimer.expired() > 2) {
notetimer.reset();
} else {
notetimer.update();
}
notestate = !notestate;
if (notestate == 1 || notestate == -1) {
synth.play(0, note, 64);
data = 0x90; sentout.insert(data);
data = note; sentout.insert(data);
data = 64; sentout.insert(data);
} else {
synth.play(0, note, 0);
data = 0x90; sentout.insert(data);
data = note; sentout.insert(data);
data = 0; sentout.insert(data);
note += step * direction;
if (note > highestnote) {
note = lowestnote;
}
if (note < lowestnote) {
note = highestnote;
}
}
}
if (midiinput.getCount() > 0) {
message = midiinput.extract();
receivedin.insert(message.p0());
receivedin.insert(message.p1());
receivedin.insert(message.p2());
// check that the messages are identical
if (receivedin.getCount() < 3) {
cout << "Error: not enough received data" << endl;
} else {
checkin[0] = receivedin.extract();
checkin[1] = receivedin.extract();
checkin[2] = receivedin.extract();
}
if (sentout.getCount() < 3) {
cout << "Error: not enough sent data" << endl;
} else {
checkout[0] = sentout.extract();
checkout[1] = sentout.extract();
checkout[2] = sentout.extract();
}
if ((checkout[0] != checkin[0]) || (checkout[1] != checkin[1]) ||
(checkout[2] != checkin[2])) {
synth.rawsend(0xaa, 0x7f, 0x00);
cout << "Error "
<< "output was = (" << hex << (int)checkout[0] << ") "
<< dec << (int)checkout[1] << " "
<< dec << (int)checkout[2] << "\tbut input is = ("
<< hex << (int)checkin[0] << ") "
<< dec << (int)checkin[1] << " "
<< dec << (int)checkin[2] << " "
<< endl;
// assume that a note message was missed.
if (sentout.getCount() < 3) {
cout << "Error: not enough sent data during error" << endl;
} else {
checkout[0] = sentout.extract();
checkout[1] = sentout.extract();
checkout[2] = sentout.extract();
}
stop();
cout << "Press space to restart testing, "
"or press 'S' to silence synth" << endl;
}
}
}
void keyboardchar(int key) {
if (isdigit(key)) {
int mkey = 5 * 12 + key - '0';
int mvel = (int)(drand48() * 40 + 40);
//turn off old note from computer's point of view
computerMessage.time = t_time;
computerMessage.p2() = 0;
synth.insert(computerMessage);
cout << "played note: " << mkey << " with velocity: " << mvel << endl;
computer.play(mkey, mvel);
computerMessage.time = t_time;
computerMessage.p0() = 0x90; // midi note-on command, channel 1
computerMessage.p1() = mkey;
computerMessage.p2() = mvel;
synth.insert(computerMessage);
cout << "played note: " << mkey << " with velocity: " << mvel << endl;
return;
}
switch (key) {
case ' ': // turn output notes on/off
activeQ = !activeQ;
if (activeQ) {
cout << "Program Activated" << endl;
} else {
cout << "Program Deactivated" << endl;
}
break;
case 'c': // toggle baton control display
controlDisplayQ = !controlDisplayQ;
if (controlDisplayQ == 0) {
cout << endl;
}
break;
case 'd': // display baton's output notes
displayOutput = !displayOutput;
if (displayOutput) {
cout << "Baton output notes display turned ON" << endl;
} else {
cout << "Baton output notes display turned OFF" << endl;
}
break;
case 'n': // display performerPCHistory pitches
{
cout << "Piano notes: ";
for (int i=0; i<11; i++) {
cout << performerPCHistory[i] << ", ";
}
cout << performerPCHistory[11] << endl;
}
break;
case 'm': // display performerPC pitches
{
cout << "Notes on: ";
for (int i=0; i<11; i++) {
cout << performerPC[i] << ", ";
}
cout << performerPC[11] << endl;
}
break;
case 'r': // display the register information
{
cout << "Register: "
<< performerRegion[0]
<< performerRegion[1]
<< performerRegion[2]
<< endl;
}
break;
case 'v': // display the active voice count for baton
{
cout << endl << "Active voices = " << countActiveVoices();
cout << ": ";
for (int z=0; z<MAXVOICES; z++) {
if (voiceState[z]) {
cout << " " << (int)voice[z].getKey();
} else {
cout << " 0";
}
}
cout << endl;
}
break;
case 'z': // forget the current piano's key history
{
for (int z=0; z<12; z++) {
performerPCHistory[z] = 0;
}
keys.reset();
keytimes.reset();
}
break;
case '[': // decrease the note memory time
keyDuration -= 1000;
if (keyDuration < 1000) {
keyDuration = 1000;
}
cout << "Note memory time set to : " << keyDuration/1000
<< " seconds" << endl;
break;
case ']': // increase the note memory time
keyDuration += 1000;
if (keyDuration > 60000) {
keyDuration = 60000;
}
cout << "Note memory time set to : " << keyDuration/1000
<< " seconds" << endl;
break;
case '-': // turn off computer keyboard note
// turn off old note from computer's point of view
computerMessage.time = t_time;
computerMessage.p2() = 0;
synth.insert(computerMessage);
// turn off old note from synthesizer's point of view
computer.off();
break;
}
}
int main(int argc, char** argv) {
options.setOptions(argc, argv);
checkOptions(options);
displayHeader(cout);
if (fileQ) {
displayHeader(outputfile);
}
KeyboardInput keyboard; // for typing comments into output file
char keych; // character from keyboard
MidiMessage message;
int lastTime = -1;
midi.open();
while (1) {
while (midi.getCount() > 0) {
message = midi.extract();
if (echoQ) {
midi.send(message);
}
if ((!activeSensingQ) && (message.p0() == 0xfe)) {
// don't display incoming active-sensing messages
continue;
}
// filter any specified message types
if (suppressOffQ && ((message.p0() & 0xf0) == 0x90) &&
(message.p2() == 0)) {
continue;
} else if (filter[(message.p0() >> 4) - 8]) {
continue;
} else if (cfilter[message.p0() & 0x0f]) {
continue;
}
// adjust message time to delta time if necessary
if (!absoluteQ) {
if (lastTime == -1) {
lastTime = message.time;
message.time = 0;
} else {
int temp = message.time;
message.time = message.time - lastTime;
lastTime = temp;
}
}
displayMessage(cout, message, style);
if (fileQ) {
displayMessage(outputfile, message, style);
}
}
if (keyboardQ && keyboard.hit()) {
keych = keyboard.getch();
switch (keych) {
case 27: // escape key
if (fileQ && bufferIndex != 0 && bufferIndex < MAX_KEY_BUFF) {
inputBuffer[bufferIndex] = '\0';
outputfile << inputBuffer;
}
keyboard.deinitialize();
exit(0);
break;
case 0x08: // backspace key
case 0x7f: // delete key
if (bufferIndex > 0) {
cout << "\b \b" << flush;
bufferIndex--;
}
break;
case 0x0a: // enter key only
#ifdef VISUAL
break;
#endif
case 13: // line feed
cout << endl;
if (bufferIndex < MAX_KEY_BUFF) {
inputBuffer[bufferIndex] = '\0';
if (fileQ) {
outputfile << inputBuffer << '\n';
}
examineInputForCommand(inputBuffer);
}
bufferIndex = 0;
break;
case 0x0c: // ^L key (redraw input)
cout << endl;
if (bufferIndex < MAX_KEY_BUFF) {
inputBuffer[bufferIndex] = '\0';
cout << inputBuffer << flush;
}
break;
default: // normal key
cout << keych << flush;
if (bufferIndex < MAX_KEY_BUFF) {
inputBuffer[bufferIndex++] = keych;
} else {
// buffer is WAY to long: kill it
bufferIndex = 0;
}
}
}
millisleep(1); // sleep for 1 millisec for multi-tasking courtesy
}