/**
@see QAM_NIM_FP_INITIALIZE
*/
s32
rtl2840_max3543_Initialize(
QAM_NIM_MODULE *pNim
)
{
typedef struct
{
s32 RegBitName;
u64 Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2840_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{QAM_OPT_RF_AAGC_DRIVE, 0x1 },
{QAM_OPT_IF_AAGC_DRIVE, 0x1 },
{QAM_OPT_RF_AAGC_OEN, 0x1 },
{QAM_OPT_IF_AAGC_OEN, 0x1 },
{QAM_RF_AAGC_MAX, 0xff },
{QAM_RF_AAGC_MIN, 0x0 },
{QAM_IF_AAGC_MAX, 0xff },
{QAM_IF_AAGC_MIN, 0x0 },
{QAM_AAGC_MODE_SEL, 0x0 },
};
QAM_DEMOD_MODULE *pDemod;
TUNER_MODULE *pTuner;
s32 i;
s32 RegBitName;
u64 Value;
// Get demod module and tuner module.
pDemod = pNim->pDemod;
pTuner = pNim->pTuner;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency in Hz with NIM default.
if(pDemod->SetIfFreqHz(pDemod, RTL2840_MAX3543_IF_FREQ_HZ_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with NIM default.
if(pDemod->SetSpectrumMode(pDemod, RTL2840_MAX3543_SPECTRUM_MODE_DEFAULT) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod AAGC registers.
// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
for(i = 0; i < RTL2840_MAX3543_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_set_registers:
error_status_execute_function:
return FUNCTION_ERROR;
}
/**
@see QAM_NIM_FP_INITIALIZE
*/
int
rtl2836b_dvbc_va1t1ed6093_Initialize(
QAM_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2836B_DVBC_VA1T1ED6093_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{QAM_AGC_DRIVE_LV, 0x0 },
{QAM_OPT_RF_AAGC_DRIVE, 0x0 },
{QAM_OPT_IF_AAGC_DRIVE, 0x0 },
{QAM_OPT_RF_AAGC_OE, 0x0 },
{QAM_OPT_IF_AAGC_OE, 0x1 },
{QAM_PAR_RF_SD_IB, 0x1 },
{QAM_PAR_IF_SD_IB, 0x1 },
{QAM_RF_AAGC_MAX, 0x80 },
{QAM_RF_AAGC_MIN, 0x80 },
{QAM_IF_AAGC_MAX, 0xff },
{QAM_IF_AAGC_MIN, 0x0 },
{QAM_VTOP, 0x80 },
{QAM_KRF_MSB, 0x1 },
{QAM_KRF_LSB, 0x1 },
{QAM_AAGC_MODE_SEL, 0x0 },
};
QAM_DEMOD_MODULE *pDemod;
TUNER_MODULE *pTuner;
int i;
int RegBitName;
unsigned long Value;
// Get demod module and tuner module.
pDemod = pNim->pDemod;
pTuner = pNim->pTuner;
// Enable demod QAM_I2CT_EN_CTRL.
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, QAM_I2CT_EN_CTRL, 0x1) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Disable demod QAM_I2CT_EN_CTRL.
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, QAM_I2CT_EN_CTRL, 0x0) != FUNCTION_SUCCESS)
goto error_status_set_registers;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency with 36 MHz.
if(pDemod->SetIfFreqHz(pDemod, IF_FREQ_36000000HZ) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_NORMAL.
// Note: RTL2836B DVB-C demod hardware will detect spectrum mode automatically,
// even if one uses SetSpectrumMode() to set spectrum mode.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_NORMAL) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod AAGC registers.
// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
for(i = 0; i < RTL2836B_DVBC_VA1T1ED6093_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->RegAccess.Addr16Bit.SetRegBits(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_set_registers:
error_status_execute_function:
return FUNCTION_ERROR;
}
/**
@see QAM_NIM_FP_INITIALIZE
*/
int
rtl2840_mt2063_Initialize(
QAM_NIM_MODULE *pNim
)
{
typedef struct
{
int RegBitName;
unsigned long Value;
}
REG_VALUE_ENTRY;
static const REG_VALUE_ENTRY AdditionalInitRegValueTable[RTL2840_MT2063_ADDITIONAL_INIT_REG_TABLE_LEN] =
{
// RegBitName, Value
{QAM_OPT_RF_AAGC_DRIVE, 0x1 },
{QAM_OPT_IF_AAGC_DRIVE, 0x1 },
{QAM_OPT_RF_AAGC_OEN, 0x1 },
{QAM_OPT_IF_AAGC_OEN, 0x1 },
{QAM_RF_AAGC_MAX, 0x80 },
{QAM_RF_AAGC_MIN, 0x80 },
{QAM_IF_AAGC_MAX, 0xff },
{QAM_IF_AAGC_MIN, 0x0 },
{QAM_AAGC_MODE_SEL, 0x0 },
};
TUNER_MODULE *pTuner;
QAM_DEMOD_MODULE *pDemod;
MT2063_EXTRA_MODULE *pTunerExtra;
RTL2840_MT2063_EXTRA_MODULE *pNimExtra;
int i;
int RegBitName;
unsigned long Value;
// Get modules.
pTuner = pNim->pTuner;
pDemod = pNim->pDemod;
pTunerExtra = &(pTuner->Extra.Mt2063);
pNimExtra = &(pNim->Extra.Rtl2840Mt2063);
// Initialize tuner.
if(pTuner->Initialize(pTuner) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set tuner IF frequency in Hz.
if(pTunerExtra->SetIfFreqHz(pTuner, pNimExtra->IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Initialize demod.
if(pDemod->Initialize(pDemod) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod IF frequency in Hz.
if(pDemod->SetIfFreqHz(pDemod, pNimExtra->IfFreqHz) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod spectrum mode with SPECTRUM_INVERSE.
if(pDemod->SetSpectrumMode(pDemod, SPECTRUM_INVERSE) != FUNCTION_SUCCESS)
goto error_status_execute_function;
// Set demod AAGC registers.
// Note: SetParameters() will set QAM_AAGC_TARGET and QAM_VTOP according to parameters.
for(i = 0; i < RTL2840_MT2063_ADDITIONAL_INIT_REG_TABLE_LEN; i++)
{
// Get register bit name and its value.
RegBitName = AdditionalInitRegValueTable[i].RegBitName;
Value = AdditionalInitRegValueTable[i].Value;
// Set demod registers
if(pDemod->RegAccess.Addr8Bit.SetRegBitsWithPage(pDemod, RegBitName, Value) != FUNCTION_SUCCESS)
goto error_status_set_registers;
}
return FUNCTION_SUCCESS;
error_status_set_registers:
error_status_execute_function:
return FUNCTION_ERROR;
}