void tst_QCameraBackend::testCameraStates()
{
QCamera camera;
QCameraImageCapture imageCapture(&camera);
QSignalSpy errorSignal(&camera, SIGNAL(error(QCamera::Error)));
QSignalSpy stateChangedSignal(&camera, SIGNAL(stateChanged(QCamera::State)));
QSignalSpy statusChangedSignal(&camera, SIGNAL(statusChanged(QCamera::Status)));
QCOMPARE(camera.state(), QCamera::UnloadedState);
QCOMPARE(camera.status(), QCamera::UnloadedStatus);
camera.load();
QCOMPARE(camera.state(), QCamera::LoadedState);
QCOMPARE(stateChangedSignal.count(), 1);
QCOMPARE(stateChangedSignal.last().first().value<QCamera::State>(), QCamera::LoadedState);
QVERIFY(stateChangedSignal.count() > 0);
QTRY_COMPARE(camera.status(), QCamera::LoadedStatus);
QCOMPARE(statusChangedSignal.last().first().value<QCamera::Status>(), QCamera::LoadedStatus);
camera.unload();
QCOMPARE(camera.state(), QCamera::UnloadedState);
QCOMPARE(stateChangedSignal.last().first().value<QCamera::State>(), QCamera::UnloadedState);
QTRY_COMPARE(camera.status(), QCamera::UnloadedStatus);
QCOMPARE(statusChangedSignal.last().first().value<QCamera::Status>(), QCamera::UnloadedStatus);
#ifdef Q_WS_MAEMO_6
//resource policy doesn't work correctly when resource is released and immediately requested again.
QTest::qWait(250);
#endif
camera.start();
QCOMPARE(camera.state(), QCamera::ActiveState);
QCOMPARE(stateChangedSignal.last().first().value<QCamera::State>(), QCamera::ActiveState);
QTRY_COMPARE(camera.status(), QCamera::ActiveStatus);
QCOMPARE(statusChangedSignal.last().first().value<QCamera::Status>(), QCamera::ActiveStatus);
camera.stop();
QCOMPARE(camera.state(), QCamera::LoadedState);
QCOMPARE(stateChangedSignal.last().first().value<QCamera::State>(), QCamera::LoadedState);
QTRY_COMPARE(camera.status(), QCamera::LoadedStatus);
QCOMPARE(statusChangedSignal.last().first().value<QCamera::Status>(), QCamera::LoadedStatus);
camera.unload();
QCOMPARE(camera.state(), QCamera::UnloadedState);
QCOMPARE(stateChangedSignal.last().first().value<QCamera::State>(), QCamera::UnloadedState);
QTRY_COMPARE(camera.status(), QCamera::UnloadedStatus);
QCOMPARE(statusChangedSignal.last().first().value<QCamera::Status>(), QCamera::UnloadedStatus);
QCOMPARE(camera.errorString(), QString());
QCOMPARE(errorSignal.count(), 0);
}
void tst_QCameraBackend::testExposureMode()
{
#if !defined(Q_WS_MAEMO_6)
QSKIP("Capture exposure parameters are supported only on mobile platforms");
#endif
QCamera camera;
QCameraExposure *exposure = camera.exposure();
#ifdef Q_WS_MAEMO_6
QEXPECT_FAIL("", "Camerabin reports Manual exposure instead of Auto", Continue);
#endif
QCOMPARE(exposure->exposureMode(), QCameraExposure::ExposureAuto);
// Night
exposure->setExposureMode(QCameraExposure::ExposureNight);
QCOMPARE(exposure->exposureMode(), QCameraExposure::ExposureNight);
camera.start();
QTRY_COMPARE(camera.status(), QCamera::ActiveStatus);
QCOMPARE(exposure->exposureMode(), QCameraExposure::ExposureNight);
camera.unload();
QTRY_COMPARE(camera.status(), QCamera::UnloadedStatus);
#ifdef Q_WS_MAEMO_6
//resource policy doesn't work correctly when resource is released and immediately requested again.
QTest::qWait(250);
#endif
// Auto
exposure->setExposureMode(QCameraExposure::ExposureAuto);
QCOMPARE(exposure->exposureMode(), QCameraExposure::ExposureAuto);
camera.start();
QTRY_COMPARE(camera.status(), QCamera::ActiveStatus);
QCOMPARE(exposure->exposureMode(), QCameraExposure::ExposureAuto);
}
void tst_QCameraBackend::testExposureCompensation()
{
#if !defined(Q_WS_MAEMO_6)
QSKIP("Capture exposure parameters are supported only on mobile platforms");
#endif
QCamera camera;
QCameraExposure *exposure = camera.exposure();
QSignalSpy exposureCompensationSignal(exposure, SIGNAL(exposureCompensationChanged(qreal)));
//it should be possible to set exposure parameters in Unloaded state
QCOMPARE(exposure->exposureCompensation()+1.0, 1.0);
exposure->setExposureCompensation(1.0);
QCOMPARE(exposure->exposureCompensation(), 1.0);
QTRY_COMPARE(exposureCompensationSignal.count(), 1);
QCOMPARE(exposureCompensationSignal.last().first().toReal(), 1.0);
//exposureCompensationChanged should not be emitted when value is not changed
exposure->setExposureCompensation(1.0);
QTest::qWait(50);
QCOMPARE(exposureCompensationSignal.count(), 1);
//exposure compensation should be preserved during load/start
camera.load();
QTRY_COMPARE(camera.status(), QCamera::LoadedStatus);
QCOMPARE(exposure->exposureCompensation(), 1.0);
exposureCompensationSignal.clear();
exposure->setExposureCompensation(-1.0);
QCOMPARE(exposure->exposureCompensation(), -1.0);
QTRY_COMPARE(exposureCompensationSignal.count(), 1);
QCOMPARE(exposureCompensationSignal.last().first().toReal(), -1.0);
camera.start();
QTRY_COMPARE(camera.status(), QCamera::ActiveStatus);
QCOMPARE(exposure->exposureCompensation(), -1.0);
exposureCompensationSignal.clear();
exposure->setExposureCompensation(1.0);
QCOMPARE(exposure->exposureCompensation(), 1.0);
QTRY_COMPARE(exposureCompensationSignal.count(), 1);
QCOMPARE(exposureCompensationSignal.last().first().toReal(), 1.0);
}
void tst_QCameraBackend::testCameraCapture()
{
QCamera camera;
QCameraImageCapture imageCapture(&camera);
//prevents camera to flash during the test
camera.exposure()->setFlashMode(QCameraExposure::FlashOff);
QVERIFY(!imageCapture.isReadyForCapture());
QSignalSpy capturedSignal(&imageCapture, SIGNAL(imageCaptured(int,QImage)));
QSignalSpy savedSignal(&imageCapture, SIGNAL(imageSaved(int,QString)));
QSignalSpy errorSignal(&imageCapture, SIGNAL(error(int, QCameraImageCapture::Error,QString)));
imageCapture.capture();
QTRY_COMPARE(errorSignal.size(), 1);
QCOMPARE(imageCapture.error(), QCameraImageCapture::NotReadyError);
QCOMPARE(capturedSignal.size(), 0);
errorSignal.clear();
camera.start();
QTRY_VERIFY(imageCapture.isReadyForCapture());
QCOMPARE(camera.status(), QCamera::ActiveStatus);
QCOMPARE(errorSignal.size(), 0);
int id = imageCapture.capture();
QTRY_VERIFY(!savedSignal.isEmpty());
QCOMPARE(capturedSignal.size(), 1);
QCOMPARE(capturedSignal.last().first().toInt(), id);
QCOMPARE(errorSignal.size(), 0);
QCOMPARE(imageCapture.error(), QCameraImageCapture::NoError);
QCOMPARE(savedSignal.last().first().toInt(), id);
QString location = savedSignal.last().last().toString();
QVERIFY(!location.isEmpty());
QVERIFY(QFileInfo(location).exists());
QImageReader reader(location);
reader.setScaledSize(QSize(320,240));
QVERIFY(!reader.read().isNull());
QFile(location).remove();
}
void tst_QCameraBackend::testCameraCaptureMetadata()
{
#ifndef Q_WS_MAEMO_6
QSKIP("Capture metadata is supported only on harmattan");
#endif
QCamera camera;
QCameraImageCapture imageCapture(&camera);
camera.exposure()->setFlashMode(QCameraExposure::FlashOff);
QSignalSpy metadataSignal(&imageCapture, SIGNAL(imageMetadataAvailable(int,QString,QVariant)));
QSignalSpy savedSignal(&imageCapture, SIGNAL(imageSaved(int,QString)));
camera.start();
QTRY_VERIFY(imageCapture.isReadyForCapture());
int id = imageCapture.capture(QString::fromLatin1("/dev/null"));
QTRY_VERIFY(!savedSignal.isEmpty());
QVERIFY(!metadataSignal.isEmpty());
QCOMPARE(metadataSignal.first().first().toInt(), id);
}
int main(int argc, char *argv[])
{
QCoreApplication a(argc, argv);
QList<QByteArray> devices = QCamera::availableDevices();
// QGPhotoServicePlugin s;
// devices = s.devices(Q_MEDIASERVICE_CAMERA);
for (QList<QByteArray>::Iterator i = devices.begin(); i != devices.end(); i ++) {
QByteArray current = *i;
cout << QString(current).toStdString() << "\n";
}
cout << "### New camera\n";
cout.flush();
QCamera *camera = new QCamera(devices[1]);
cout << "### Camera device description\n";
cout.flush();
QString description = camera->deviceDescription(devices.at(1)); //
std::cout << description.toStdString() << "\n";
QCameraImageCapture *imageCapture = new QCameraImageCapture(camera); // Object to take pictures
camera->setCaptureMode(QCamera::CaptureStillImage); // Set the camera mode
cout << "### Start camera\n";
cout.flush();
camera->start();
/*
camera->searchAndLock();
imageCapture->capture(QString('/tmp/test.jpg')); // Method to take a picture. Arg: path to save the picture
camera->unlock();
*/
// imageCapture->capture(QString("/tmp/capture.nef"));
qDebug() << camera->exposure()->supportedApertures();
qDebug() << camera->exposure()->supportedIsoSensitivities();
qDebug() << camera->exposure()->supportedShutterSpeeds();
qDebug() << "Aperture = " << camera->exposure()->aperture();
qDebug() << "Shutter speed = " << camera->exposure()->shutterSpeed();
qDebug() << "ISO = " << camera->exposure()->isoSensitivity();
camera->exposure()->setManualAperture(5.6);
camera->exposure()->setManualShutterSpeed(10.0);
camera->exposure()->setManualIsoSensitivity(800);
cout << "### Stop camera\n";
cout.flush();
camera->stop();
delete imageCapture;
delete camera;
return a.exec();
}
void tst_QCameraBackend::testCaptureToBuffer()
{
QCamera camera;
QCameraImageCapture imageCapture(&camera);
camera.exposure()->setFlashMode(QCameraExposure::FlashOff);
camera.load();
#ifdef Q_WS_MAEMO_6
QVERIFY(imageCapture.isCaptureDestinationSupported(QCameraImageCapture::CaptureToBuffer));
#endif
if (!imageCapture.isCaptureDestinationSupported(QCameraImageCapture::CaptureToBuffer))
QSKIP("Buffer capture not supported");
QTRY_COMPARE(camera.status(), QCamera::LoadedStatus);
QCOMPARE(imageCapture.bufferFormat(), QVideoFrame::Format_Jpeg);
QVERIFY(imageCapture.isCaptureDestinationSupported(QCameraImageCapture::CaptureToFile));
QVERIFY(imageCapture.isCaptureDestinationSupported(QCameraImageCapture::CaptureToBuffer));
QVERIFY(imageCapture.isCaptureDestinationSupported(
QCameraImageCapture::CaptureToBuffer | QCameraImageCapture::CaptureToFile));
QSignalSpy destinationChangedSignal(&imageCapture, SIGNAL(captureDestinationChanged(QCameraImageCapture::CaptureDestinations)));
QCOMPARE(imageCapture.captureDestination(), QCameraImageCapture::CaptureToFile);
imageCapture.setCaptureDestination(QCameraImageCapture::CaptureToBuffer);
QCOMPARE(imageCapture.captureDestination(), QCameraImageCapture::CaptureToBuffer);
QCOMPARE(destinationChangedSignal.size(), 1);
QCOMPARE(destinationChangedSignal.first().first().value<QCameraImageCapture::CaptureDestinations>(),
QCameraImageCapture::CaptureToBuffer);
QSignalSpy capturedSignal(&imageCapture, SIGNAL(imageCaptured(int,QImage)));
QSignalSpy imageAvailableSignal(&imageCapture, SIGNAL(imageAvailable(int,QVideoFrame)));
QSignalSpy savedSignal(&imageCapture, SIGNAL(imageSaved(int,QString)));
QSignalSpy errorSignal(&imageCapture, SIGNAL(error(int, QCameraImageCapture::Error,QString)));
camera.start();
QTRY_VERIFY(imageCapture.isReadyForCapture());
int id = imageCapture.capture();
QTRY_VERIFY(!imageAvailableSignal.isEmpty());
QVERIFY(errorSignal.isEmpty());
QVERIFY(!capturedSignal.isEmpty());
QVERIFY(!imageAvailableSignal.isEmpty());
QTest::qWait(2000);
QVERIFY(savedSignal.isEmpty());
QCOMPARE(capturedSignal.first().first().toInt(), id);
QCOMPARE(imageAvailableSignal.first().first().toInt(), id);
QVideoFrame frame = imageAvailableSignal.first().last().value<QVideoFrame>();
QVERIFY(frame.isValid());
QCOMPARE(frame.pixelFormat(), QVideoFrame::Format_Jpeg);
QVERIFY(!frame.size().isEmpty());
QVERIFY(frame.map(QAbstractVideoBuffer::ReadOnly));
QByteArray data((const char *)frame.bits(), frame.mappedBytes());
frame.unmap();
frame = QVideoFrame();
QVERIFY(!data.isEmpty());
QBuffer buffer;
buffer.setData(data);
buffer.open(QIODevice::ReadOnly);
QImageReader reader(&buffer, "JPG");
reader.setScaledSize(QSize(640,480));
QImage img(reader.read());
QVERIFY(!img.isNull());
capturedSignal.clear();
imageAvailableSignal.clear();
savedSignal.clear();
//Capture to yuv buffer
#ifdef Q_WS_MAEMO_6
QVERIFY(imageCapture.supportedBufferFormats().contains(QVideoFrame::Format_UYVY));
#endif
if (imageCapture.supportedBufferFormats().contains(QVideoFrame::Format_UYVY)) {
imageCapture.setBufferFormat(QVideoFrame::Format_UYVY);
QCOMPARE(imageCapture.bufferFormat(), QVideoFrame::Format_UYVY);
id = imageCapture.capture();
QTRY_VERIFY(!imageAvailableSignal.isEmpty());
QVERIFY(errorSignal.isEmpty());
QVERIFY(!capturedSignal.isEmpty());
QVERIFY(!imageAvailableSignal.isEmpty());
QVERIFY(savedSignal.isEmpty());
QTest::qWait(2000);
QVERIFY(savedSignal.isEmpty());
frame = imageAvailableSignal.first().last().value<QVideoFrame>();
QVERIFY(frame.isValid());
qDebug() << frame.pixelFormat();
QCOMPARE(frame.pixelFormat(), QVideoFrame::Format_UYVY);
QVERIFY(!frame.size().isEmpty());
frame = QVideoFrame();
capturedSignal.clear();
imageAvailableSignal.clear();
savedSignal.clear();
imageCapture.setBufferFormat(QVideoFrame::Format_Jpeg);
QCOMPARE(imageCapture.bufferFormat(), QVideoFrame::Format_Jpeg);
}
//Try to capture to both buffer and file
#ifdef Q_WS_MAEMO_6
QVERIFY(imageCapture.isCaptureDestinationSupported(QCameraImageCapture::CaptureToBuffer | QCameraImageCapture::CaptureToFile));
#endif
if (imageCapture.isCaptureDestinationSupported(QCameraImageCapture::CaptureToBuffer | QCameraImageCapture::CaptureToFile)) {
imageCapture.setCaptureDestination(QCameraImageCapture::CaptureToBuffer | QCameraImageCapture::CaptureToFile);
int oldId = id;
id = imageCapture.capture();
QVERIFY(id != oldId);
QTRY_VERIFY(!savedSignal.isEmpty());
QVERIFY(errorSignal.isEmpty());
QVERIFY(!capturedSignal.isEmpty());
QVERIFY(!imageAvailableSignal.isEmpty());
QVERIFY(!savedSignal.isEmpty());
QCOMPARE(capturedSignal.first().first().toInt(), id);
QCOMPARE(imageAvailableSignal.first().first().toInt(), id);
frame = imageAvailableSignal.first().last().value<QVideoFrame>();
QVERIFY(frame.isValid());
QCOMPARE(frame.pixelFormat(), QVideoFrame::Format_Jpeg);
QVERIFY(!frame.size().isEmpty());
QString fileName = savedSignal.first().last().toString();
QVERIFY(QFileInfo(fileName).exists());
}
}
void tst_QCameraBackend::testCaptureMode()
{
QCamera camera;
QSignalSpy errorSignal(&camera, SIGNAL(error(QCamera::Error)));
QSignalSpy stateChangedSignal(&camera, SIGNAL(stateChanged(QCamera::State)));
QSignalSpy captureModeSignal(&camera, SIGNAL(captureModeChanged(QCamera::CaptureModes)));
QCOMPARE(camera.captureMode(), QCamera::CaptureStillImage);
if (!camera.isCaptureModeSupported(QCamera::CaptureVideo)) {
camera.setCaptureMode(QCamera::CaptureVideo);
QCOMPARE(camera.captureMode(), QCamera::CaptureStillImage);
QSKIP("Video capture not supported");
}
camera.setCaptureMode(QCamera::CaptureVideo);
QCOMPARE(camera.captureMode(), QCamera::CaptureVideo);
QTRY_COMPARE(captureModeSignal.size(), 1);
QCOMPARE(captureModeSignal.last().first().value<QCamera::CaptureModes>(), QCamera::CaptureVideo);
captureModeSignal.clear();
camera.load();
QTRY_COMPARE(camera.status(), QCamera::LoadedStatus);
//capture mode should still be video
QCOMPARE(camera.captureMode(), QCamera::CaptureVideo);
//it should be possible to switch capture mode in Loaded state
camera.setCaptureMode(QCamera::CaptureStillImage);
QTRY_COMPARE(captureModeSignal.size(), 1);
QCOMPARE(captureModeSignal.last().first().value<QCamera::CaptureModes>(), QCamera::CaptureStillImage);
captureModeSignal.clear();
camera.setCaptureMode(QCamera::CaptureVideo);
QTRY_COMPARE(captureModeSignal.size(), 1);
QCOMPARE(captureModeSignal.last().first().value<QCamera::CaptureModes>(), QCamera::CaptureVideo);
captureModeSignal.clear();
camera.start();
QTRY_COMPARE(camera.status(), QCamera::ActiveStatus);
//capture mode should still be video
QCOMPARE(camera.captureMode(), QCamera::CaptureVideo);
stateChangedSignal.clear();
//it should be possible to switch capture mode in Active state
camera.setCaptureMode(QCamera::CaptureStillImage);
//camera may leave Active status, but should return to Active
QTest::qWait(10); //camera may leave Active status async
QTRY_COMPARE(camera.status(), QCamera::ActiveStatus);
QCOMPARE(camera.captureMode(), QCamera::CaptureStillImage);
QVERIFY2(stateChangedSignal.isEmpty(), "camera should not change the state during capture mode changes");
QCOMPARE(captureModeSignal.size(), 1);
QCOMPARE(captureModeSignal.last().first().value<QCamera::CaptureModes>(), QCamera::CaptureStillImage);
captureModeSignal.clear();
camera.setCaptureMode(QCamera::CaptureVideo);
//camera may leave Active status, but should return to Active
QTest::qWait(10); //camera may leave Active status async
QTRY_COMPARE(camera.status(), QCamera::ActiveStatus);
QCOMPARE(camera.captureMode(), QCamera::CaptureVideo);
QVERIFY2(stateChangedSignal.isEmpty(), "camera should not change the state during capture mode changes");
QCOMPARE(captureModeSignal.size(), 1);
QCOMPARE(captureModeSignal.last().first().value<QCamera::CaptureModes>(), QCamera::CaptureVideo);
captureModeSignal.clear();
camera.stop();
QCOMPARE(camera.captureMode(), QCamera::CaptureVideo);
camera.unload();
QCOMPARE(camera.captureMode(), QCamera::CaptureVideo);
QVERIFY2(errorSignal.isEmpty(), QString("Camera error: %1").arg(camera.errorString()).toLocal8Bit());
}