void OpenconnectSettingWidget::writeConfig()
{
Q_D(OpenconnectSettingWidget);
d->setting->setServiceType(QLatin1String(NM_DBUS_SERVICE_OPENCONNECT));
QStringMap data;
QStringMap secretData;
data.insert(QLatin1String(NM_OPENCONNECT_KEY_GATEWAY), d->ui.leGateway->text().toUtf8());
if (!d->ui.leCaCertificate->url().isEmpty())
data.insert(QLatin1String(NM_OPENCONNECT_KEY_CACERT), d->ui.leCaCertificate->url().path());
if (!d->ui.leProxy->text().isEmpty())
data.insert(QLatin1String(NM_OPENCONNECT_KEY_PROXY), d->ui.leProxy->text().toUtf8());
data.insert(QLatin1String(NM_OPENCONNECT_KEY_CSD_ENABLE), d->ui.chkAllowTrojan->isChecked() ? "yes" : "no");
if (!d->ui.leCsdWrapperScript->url().isEmpty())
data.insert(QLatin1String(NM_OPENCONNECT_KEY_CSD_WRAPPER), d->ui.leCsdWrapperScript->url().path());
if (!d->ui.leUserCert->url().isEmpty())
data.insert(QLatin1String(NM_OPENCONNECT_KEY_USERCERT), d->ui.leUserCert->url().path());
if (!d->ui.leUserPrivateKey->url().isEmpty())
data.insert(QLatin1String(NM_OPENCONNECT_KEY_PRIVKEY), d->ui.leUserPrivateKey->url().path());
data.insert(QLatin1String(NM_OPENCONNECT_KEY_PEM_PASSPHRASE_FSID), d->ui.chkUseFsid->isChecked() ? "yes" : "no");
/* These are different for every login session, and should not be stored */
data.insert(QLatin1String(NM_OPENCONNECT_KEY_COOKIE"-flags"), QString::number(Knm::Setting::NotSaved));
data.insert(QLatin1String(NM_OPENCONNECT_KEY_GWCERT"-flags"), QString::number(Knm::Setting::NotSaved));
data.insert(QLatin1String(NM_OPENCONNECT_KEY_GATEWAY"-flags"), QString::number(Knm::Setting::NotSaved));
d->setting->setData(data);
//VpnSecrets empty so far, they will be acquired by the auth dialog
d->setting->setVpnSecrets(secretData);
}
uint VpncSettingWidget::handleOnePasswordType(const QComboBox * combo, const QString & key, QStringMap & data)
{
uint type = combo->currentIndex();
switch (type) {
case VpncSettingWidgetPrivate::EnumPasswordStorage::AlwaysAsk:
data.insert(key, QString::number(Knm::Setting::NotSaved));
break;
case VpncSettingWidgetPrivate::EnumPasswordStorage::Save:
data.insert(key, QString::number(Knm::Setting::AgentOwned));
break;
case VpncSettingWidgetPrivate::EnumPasswordStorage::NotRequired:
data.insert(key, QString::number(Knm::Setting::NotRequired));
break;
}
return type;
}
QStringMap AbstractWebApplication::parseCookie(const Http::Request &request) const
{
// [rfc6265] 4.2.1. Syntax
QStringMap ret;
const QString cookieStr = request.headers.value(QLatin1String("cookie"));
const QVector<QStringRef> cookies = cookieStr.splitRef(';', QString::SkipEmptyParts);
for (const auto &cookie : cookies) {
const int idx = cookie.indexOf('=');
if (idx < 0)
continue;
const QString name = cookie.left(idx).trimmed().toString();
const QString value = Utils::String::unquote(cookie.mid(idx + 1).trimmed())
.toString();
ret.insert(name, value);
}
return ret;
}
void SSDP::ProcessData( MSocketDevice *pSocket )
{
QByteArray buffer;
long nBytes = 0;
while ((nBytes = pSocket->bytesAvailable()) > 0)
{
buffer.resize(nBytes);
long nRead = 0;
do
{
long ret = pSocket->readBlock( buffer.data() + nRead, nBytes - nRead );
if (ret < 0)
{
LOG(VB_GENERAL, LOG_ERR, QString("Socket readBlock error %1")
.arg(pSocket->error()));
buffer.clear();
break;
}
nRead += ret;
if (0 == ret)
{
LOG(VB_SOCKET, LOG_WARNING,
QString("%1 bytes reported available, "
"but only %2 bytes read.")
.arg(nBytes).arg(nRead));
nBytes = nRead;
buffer.resize(nBytes);
break;
}
}
while (nRead < nBytes);
if (buffer.isEmpty())
continue;
QHostAddress peerAddress = pSocket->peerAddress();
quint16 peerPort = pSocket->peerPort ();
// ------------------------------------------------------------------
QString str = QString(buffer.constData());
QStringList lines = str.split("\r\n", QString::SkipEmptyParts);
QString sRequestLine = lines.size() ? lines[0] : "";
lines.pop_front();
// ------------------------------------------------------------------
// Parse request Type
// ------------------------------------------------------------------
LOG(VB_UPNP, LOG_DEBUG, QString("SSDP::ProcessData - requestLine: %1")
.arg(sRequestLine));
SSDPRequestType eType = ProcessRequestLine( sRequestLine );
// ------------------------------------------------------------------
// Read Headers into map
// ------------------------------------------------------------------
QStringMap headers;
for ( QStringList::Iterator it = lines.begin();
it != lines.end(); ++it )
{
QString sLine = *it;
QString sName = sLine.section( ':', 0, 0 ).trimmed();
QString sValue = sLine.section( ':', 1 );
sValue.truncate( sValue.length() ); //-2
if ((sName.length() != 0) && (sValue.length() !=0))
headers.insert( sName.toLower(), sValue.trimmed() );
}
#if 0
pSocket->SetDestAddress( peerAddress, peerPort );
#endif
// --------------------------------------------------------------
// See if this is a valid request
// --------------------------------------------------------------
switch( eType )
{
case SSDP_MSearch:
{
// ----------------------------------------------------------
// If we haven't enabled notifications yet, then we don't
// want to answer search requests.
// ----------------------------------------------------------
if (m_pNotifyTask != NULL)
ProcessSearchRequest( headers, peerAddress, peerPort );
break;
}
case SSDP_MSearchResp:
ProcessSearchResponse( headers);
break;
case SSDP_Notify:
ProcessNotify( headers );
break;
case SSDP_Unknown:
default:
LOG(VB_UPNP, LOG_ERR,
"SSPD::ProcessData - Unknown request Type.");
break;
}
}
}
void NovellVpnSettingWidget::writeX509Auth(QStringMap & data, QStringMap & secretData)
{
data.insert(QLatin1String(NM_NOVELLVPN_KEY_AUTHTYPE), QLatin1String(NM_NOVELLVPN_CONTYPE_X509_STRING));
data.insert(NM_NOVELLVPN_KEY_CERTIFICATE, d->ui.x509Cert->url().path());
secretData.insert(QLatin1String(NM_NOVELLVPN_KEY_CERT_PWD), d->ui.x509CertPass->text());
}
void NovellVpnSettingWidget::writeConfig()
{
kDebug();
d->setting->setServiceType(QLatin1String(NM_DBUS_SERVICE_NOVELLVPN));
QStringMap data;
QStringMap secretData;
// required settings
data.insert(NM_NOVELLVPN_KEY_GATEWAY, d->ui.leGateway->text());
if (d->ui.cmbGwType->currentIndex() == 0) {
data.insert(QLatin1String(NM_NOVELLVPN_KEY_GWTYPE), QLatin1String(NM_NOVELLVPN_GWTYPE_NORTEL_STRING));
if (d->ui.cmbAuthType->currentIndex() == 0) {
data.insert(QLatin1String(NM_NOVELLVPN_KEY_AUTHTYPE), QLatin1String(NM_NOVELLVPN_CONTYPE_GROUPAUTH_STRING));
data.insert(QLatin1String(NM_NOVELLVPN_KEY_USER_NAME), d->ui.leUserName->text());
data.insert(QLatin1String(NM_NOVELLVPN_KEY_GROUP_NAME), d->ui.leGroupName->text());
secretData.insert(QLatin1String(NM_NOVELLVPN_KEY_USER_PWD), d->ui.leUserPass->text());
secretData.insert(QLatin1String(NM_NOVELLVPN_KEY_GRP_PWD), d->ui.leGroupPass->text());
} else {
writeX509Auth(data, secretData);
}
} else {
data.insert(QLatin1String(NM_NOVELLVPN_KEY_GWTYPE), QLatin1String(NM_NOVELLVPN_GWTYPE_STDGW_STRING));
writeX509Auth(data, secretData);
}
// advanced dialog
data.insert(QLatin1String(NM_NOVELLVPN_KEY_DHGROUP),
(d->advUi.rbDh1->isChecked()
? QString::number(DHGROUP_DH1)
: QString::number(DHGROUP_DH2)));
if (d->advUi.rbPfOff->isChecked()) {
data.insert(QLatin1String(NM_NOVELLVPN_KEY_PFSGROUP), QString::number(PFSGROUP_OFF));
} else if (d->advUi.rbPf1->isChecked()) {
data.insert(QLatin1String(NM_NOVELLVPN_KEY_PFSGROUP), QString::number(PFSGROUP_PFS1));
} else {
data.insert(QLatin1String(NM_NOVELLVPN_KEY_PFSGROUP), QString::number(PFSGROUP_PFS2));
}
data.insert(QLatin1String(NM_NOVELLVPN_KEY_NOSPLITTUNNEL), d->advUi.cbDisableSplit->isChecked() ? QLatin1String("yes") : QLatin1String("no"));
d->setting->setData(data);
d->setting->setVpnSecrets(secretData);
}
QDomDocument SOAPClient::SendSOAPRequest(const QString &sMethod,
QStringMap &list,
int &nErrCode,
QString &sErrDesc)
{
QUrl url(m_url);
url.setPath(m_sControlPath);
nErrCode = UPnPResult_Success;
sErrDesc = "";
QDomDocument xmlResult;
if (m_sNamespace.isEmpty())
{
nErrCode = UPnPResult_MythTV_NoNamespaceGiven;
sErrDesc = "No namespace given";
return xmlResult;
}
// --------------------------------------------------------------
// Add appropriate headers
// --------------------------------------------------------------
QHash<QByteArray, QByteArray> headers;
headers.insert("Content-Type", "text/xml; charset=\"utf-8\"");
QString soapHeader = QString("\"%1#%2\"").arg(m_sNamespace).arg(sMethod);
headers.insert("SOAPACTION", soapHeader.toUtf8());
headers.insert("User-Agent", "Mozilla/9.876 (X11; U; Linux 2.2.12-20 i686, en) "
"Gecko/25250101 Netscape/5.432b1");
// --------------------------------------------------------------
// Build request payload
// --------------------------------------------------------------
QByteArray aBuffer;
QTextStream os( &aBuffer );
os.setCodec("UTF-8");
os << "<?xml version=\"1.0\" encoding=\"utf-8\"?>\r\n";
os << "<s:Envelope "
" s:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\""
" xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\">\r\n";
os << " <s:Body>\r\n";
os << " <u:" << sMethod << " xmlns:u=\"" << m_sNamespace << "\">\r\n";
// --------------------------------------------------------------
// Add parameters from list
// --------------------------------------------------------------
for (QStringMap::iterator it = list.begin(); it != list.end(); ++it)
{
os << " <" << it.key() << ">";
os << HTTPRequest::Encode( *it );
os << "</" << it.key() << ">\r\n";
}
os << " </u:" << sMethod << ">\r\n";
os << " </s:Body>\r\n";
os << "</s:Envelope>\r\n";
os.flush();
// --------------------------------------------------------------
// Perform Request
// --------------------------------------------------------------
LOG(VB_UPNP, LOG_DEBUG,
QString("SOAPClient(%1) sending:\n %2").arg(url.toString()).arg(aBuffer.constData()));
QString sXml;
if (!GetMythDownloadManager()->postAuth(url.toString(), &aBuffer, NULL, NULL, &headers))
{
LOG(VB_GENERAL, LOG_ERR, QString("SOAPClient::SendSOAPRequest: request failed: %1")
.arg(url.toString()));
}
else
sXml = QString(aBuffer);
// --------------------------------------------------------------
// Parse response
// --------------------------------------------------------------
LOG(VB_UPNP, LOG_DEBUG, "SOAPClient response:\n" +
QString("%1\n").arg(sXml));
// TODO handle timeout without response correctly.
list.clear();
QDomDocument doc;
if (!doc.setContent(sXml, true, &sErrDesc, &nErrCode))
{
LOG(VB_UPNP, LOG_ERR,
QString("SendSOAPRequest( %1 ) - Invalid response from %2")
.arg(sMethod).arg(url.toString()) +
QString("%1: %2").arg(nErrCode).arg(sErrDesc));
return xmlResult;
}
// --------------------------------------------------------------
// Is this a valid response?
// --------------------------------------------------------------
QString sResponseName = sMethod + "Response";
QDomNodeList oNodeList =
doc.elementsByTagNameNS(m_sNamespace, sResponseName);
if (oNodeList.count() == 0)
{
// --------------------------------------------------------------
// Must be a fault... parse it to return reason
// --------------------------------------------------------------
nErrCode = GetNodeValue(
doc, "Envelope/Body/Fault/detail/UPnPError/errorCode", 500);
sErrDesc = GetNodeValue(
doc, "Envelope/Body/Fault/detail/UPnPError/errorDescription", "");
if (sErrDesc.isEmpty())
sErrDesc = QString("Unknown #%1").arg(nErrCode);
QDomNode oNode = FindNode( "Envelope/Body/Fault", doc );
oNode = xmlResult.importNode( oNode, true );
xmlResult.appendChild( oNode );
return xmlResult;
}
QDomNode oMethod = oNodeList.item(0);
if (oMethod.isNull())
return xmlResult;
QDomNode oNode = oMethod.firstChild();
for (; !oNode.isNull(); oNode = oNode.nextSibling())
{
QDomElement e = oNode.toElement();
if (e.isNull())
continue;
QString sName = e.tagName();
QString sValue = "";
QDomText oText = oNode.firstChild().toText();
if (!oText.isNull())
sValue = oText.nodeValue();
list.insert(QUrl::fromPercentEncoding(sName.toUtf8()),
QUrl::fromPercentEncoding(sValue.toUtf8()));
}
// Create copy of oMethod that can be used with xmlResult.
oMethod = xmlResult.importNode( oMethod.firstChild(), true );
// importNode does not attach the new nodes to the document,
// do it here.
xmlResult.appendChild( oMethod );
return xmlResult;
}
void VpncSettingWidget::writeConfig()
{
Q_D(VpncSettingWidget);
kDebug();
d->setting->setServiceType(QLatin1String(NM_DBUS_SERVICE_VPNC));
QStringMap data;
QStringMap secretData;
// General settings
// gateway
if (!d->ui.leGateway->text().isEmpty()) {
data.insert(NM_VPNC_KEY_GATEWAY, d->ui.leGateway->text());
}
// group name
if (!d->ui.leGroupName->text().isEmpty()) {
data.insert(NM_VPNC_KEY_ID, d->ui.leGroupName->text());
}
// user password
if (!d->ui.leUserPassword->text().isEmpty() && d->ui.cboUserPassOptions->currentIndex() == VpncSettingWidgetPrivate::EnumPasswordStorage::Save) {
secretData.insert(NM_VPNC_KEY_XAUTH_PASSWORD, d->ui.leUserPassword->text());
}
// group password
if (!d->ui.leGroupPassword->text().isEmpty() && d->ui.cboGroupPassOptions->currentIndex() == VpncSettingWidgetPrivate::EnumPasswordStorage::Save) {
secretData.insert(NM_VPNC_KEY_SECRET, d->ui.leGroupPassword->text());
}
handleOnePasswordType(d->ui.cboUserPassOptions, NM_VPNC_KEY_XAUTH_PASSWORD"-flags", data);
handleOnePasswordType(d->ui.cboGroupPassOptions, NM_VPNC_KEY_SECRET"-flags", data);
// hybrid auth
if (d->ui.cbUseHybridAuth->isChecked()) {
data.insert(NM_VPNC_KEY_AUTHMODE, QLatin1String("hybrid"));
data.insert(NM_VPNC_KEY_CA_FILE, d->ui.leCaCertPath->url().path());
}
// Optional settings
// username
if (!d->ui.leUserName->text().isEmpty()) {
data.insert(NM_VPNC_KEY_XAUTH_USER, d->ui.leUserName->text());
}
// domain
if (!d->ui.leDomain->text().isEmpty()) {
data.insert(NM_VPNC_KEY_DOMAIN, d->ui.leDomain->text());
}
// encryption
switch (d->ui.cboEncryptionMethod->currentIndex()) {
case VpncSettingWidgetPrivate::EnumEncryptionMethod::Weak:
data.insert(NM_VPNC_KEY_SINGLE_DES, QLatin1String("yes"));
break;
case VpncSettingWidgetPrivate::EnumEncryptionMethod::None:
data.insert(NM_VPNC_KEY_NO_ENCRYPTION, QLatin1String("yes"));
break;
default:
break;
}
// nat traversal
switch (d->ui.cboNatTraversal->currentIndex()) {
case VpncSettingWidgetPrivate::EnumNatt::Force:
data.insert(NM_VPNC_KEY_NAT_TRAVERSAL_MODE, QLatin1String(NM_VPNC_NATT_MODE_NATT_ALWAYS));
break;
case VpncSettingWidgetPrivate::EnumNatt::CiscoUdp:
data.insert(NM_VPNC_KEY_NAT_TRAVERSAL_MODE, QLatin1String(NM_VPNC_NATT_MODE_CISCO));
break;
case VpncSettingWidgetPrivate::EnumNatt::Disabled:
data.insert(NM_VPNC_KEY_NAT_TRAVERSAL_MODE, QLatin1String(NM_VPNC_NATT_MODE_NONE));
break;
case VpncSettingWidgetPrivate::EnumNatt::NattIfAvail:
default:
data.insert(NM_VPNC_KEY_NAT_TRAVERSAL_MODE, QLatin1String(NM_VPNC_NATT_MODE_NATT));
break;
}
// dead peer detection
if (d->ui.chkDeadPeerDetection->isChecked()) {
if (d->dpdTimeout > 0) {
data.insert(NM_VPNC_KEY_DPD_IDLE_TIMEOUT, QString::number(d->dpdTimeout));
}
} else {
data.insert(NM_VPNC_KEY_DPD_IDLE_TIMEOUT, QString::number(0));
}
// dh group
switch (d->ui.cboDHGroup->currentIndex()) {
case VpncSettingWidgetPrivate::EnumDh::Dh1: // DH Group 1
data.insert(NM_VPNC_KEY_DHGROUP, NM_VPNC_DHGROUP_DH1);
break;
case VpncSettingWidgetPrivate::EnumDh::Dh2: // DH Group 2
data.insert(NM_VPNC_KEY_DHGROUP, NM_VPNC_DHGROUP_DH2);
break;
case VpncSettingWidgetPrivate::EnumDh::Dh5: // DH Group 5
data.insert(NM_VPNC_KEY_DHGROUP, NM_VPNC_DHGROUP_DH5);
break;
}
// Perfect Forward Secrecy
switch (d->ui.cboPerfectForwardSecrecy->currentIndex()) {
case VpncSettingWidgetPrivate::EnumPerfectForwardSecrecy::NoPfs:
data.insert(NM_VPNC_KEY_PERFECT_FORWARD, QLatin1String("nopfs"));
break;
case VpncSettingWidgetPrivate::EnumPerfectForwardSecrecy::Server:
data.insert(NM_VPNC_KEY_PERFECT_FORWARD, QLatin1String("server"));
break;
case VpncSettingWidgetPrivate::EnumPerfectForwardSecrecy::Dh1:
data.insert(NM_VPNC_KEY_PERFECT_FORWARD, QLatin1String("dh1"));
break;
case VpncSettingWidgetPrivate::EnumPerfectForwardSecrecy::Dh2:
data.insert(NM_VPNC_KEY_PERFECT_FORWARD, QLatin1String("dh2"));
break;
case VpncSettingWidgetPrivate::EnumPerfectForwardSecrecy::Dh5:
data.insert(NM_VPNC_KEY_PERFECT_FORWARD, QLatin1String("dh5"));
break;
}
// Vendor
switch (d->ui.cboVendor->currentIndex()) {
case VpncSettingWidgetPrivate::EnumVendor::Cisco:
data.insert(NM_VPNC_KEY_VENDOR, QLatin1String("cisco"));
break;
case VpncSettingWidgetPrivate::EnumVendor::Netscreen:
data.insert(NM_VPNC_KEY_VENDOR, QLatin1String("netscreen"));
break;
}
// Application Version
if (!d->ui.leApplicationVersion->text().isEmpty()) {
data.insert(NM_VPNC_KEY_APP_VERSION, d->ui.leApplicationVersion->text());
}
// Local Port
data.insert(NM_VPNC_KEY_LOCAL_PORT, QString::number(d->ui.spbLocalPort->value()));
// Cisco UDP Encapsulation Port
data.insert(NM_VPNC_KEY_CISCO_UDP_ENCAPS_PORT, QString::number(d->ui.spbCiscoUdpEncPort->value()));
d->setting->setData(data);
d->setting->setVpnSecrets(secretData);
}
void SSDP::ProcessData( MSocketDevice *pSocket )
{
long nBytes = 0;
long nRead = 0;
while ((nBytes = pSocket->bytesAvailable()) > 0)
{
QByteArray buffer;
buffer.resize(nBytes);
nRead = pSocket->readBlock( buffer.data(), nBytes );
QHostAddress peerAddress = pSocket->peerAddress();
quint16 peerPort = pSocket->peerPort ();
// ------------------------------------------------------------------
QString str = QString(buffer.constData());
QStringList lines = str.split("\r\n", QString::SkipEmptyParts);
QString sRequestLine = lines.size() ? lines[0] : "";
lines.pop_front();
// ------------------------------------------------------------------
// Parse request Type
// ------------------------------------------------------------------
VERBOSE(VB_UPNP+VB_EXTRA,
QString( "SSDP::ProcessData - requestLine: %1" )
.arg( sRequestLine ));
SSDPRequestType eType = ProcessRequestLine( sRequestLine );
// ------------------------------------------------------------------
// Read Headers into map
// ------------------------------------------------------------------
QStringMap headers;
for ( QStringList::Iterator it = lines.begin();
it != lines.end(); ++it )
{
QString sLine = *it;
QString sName = sLine.section( ':', 0, 0 ).trimmed();
QString sValue = sLine.section( ':', 1 );
sValue.truncate( sValue.length() ); //-2
if ((sName.length() != 0) && (sValue.length() !=0))
headers.insert( sName.toLower(), sValue.trimmed() );
}
// pSocket->SetDestAddress( peerAddress, peerPort );
// --------------------------------------------------------------
// See if this is a valid request
// --------------------------------------------------------------
switch( eType )
{
case SSDP_MSearch:
{
// ----------------------------------------------------------
// If we haven't enabled notifications yet, then we don't
// want to answer search requests.
// ----------------------------------------------------------
if (m_pNotifyTask != NULL)
ProcessSearchRequest( headers, peerAddress, peerPort );
break;
}
case SSDP_MSearchResp:
ProcessSearchResponse( headers);
break;
case SSDP_Notify:
ProcessNotify( headers );
break;
case SSDP_Unknown:
default:
VERBOSE(VB_UPNP, "SSPD::ProcessData - Unknown request Type.");
break;
}
}
}
/** Actually sends the sMethod action to the command URL specified
* in the constructor (url+[/]+sControlPath).
*
* \param sMethod method to be invoked. e.g. "SetChannel",
* "GetConnectionInfoResult"
*
* \param list Parsed as a series of key value pairs for the input params
* and then cleared and used for the output params.
*
* \param nErrCode set to zero on success, non-zero in case of error.
*
* \param sErrCode returns error description from device, when applicable.
*
* \param bInQtThread May be set to true if this is run from within
* a QThread with a running an event loop.
*
* \return Returns a QDomDocument containing output parameters on success.
*/
QDomDocument SOAPClient::SendSOAPRequest(const QString &sMethod,
QStringMap &list,
int &nErrCode,
QString &sErrDesc,
bool bInQtThread)
{
QUrl url(m_url);
url.setPath(m_sControlPath);
nErrCode = UPnPResult_Success;
sErrDesc = "";
QDomDocument xmlResult;
if (m_sNamespace.isEmpty())
{
nErrCode = UPnPResult_MythTV_NoNamespaceGiven;
sErrDesc = "No namespace given";
return xmlResult;
}
// --------------------------------------------------------------
// Add appropriate headers
// --------------------------------------------------------------
QHttpRequestHeader header("POST", sMethod, 1, 0);
header.setValue("CONTENT-TYPE", "text/xml; charset=\"utf-8\"" );
header.setValue("SOAPACTION",
QString("\"%1#%2\"").arg(m_sNamespace).arg(sMethod));
// --------------------------------------------------------------
// Build request payload
// --------------------------------------------------------------
QByteArray aBuffer;
QTextStream os( &aBuffer );
os.setCodec("UTF-8");
os << "<?xml version=\"1.0\" encoding=\"utf-8\"?>\r\n";
os << "<s:Envelope "
" s:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\""
" xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\">\r\n";
os << " <s:Body>\r\n";
os << " <u:" << sMethod << " xmlns:u=\"" << m_sNamespace << "\">\r\n";
// --------------------------------------------------------------
// Add parameters from list
// --------------------------------------------------------------
for (QStringMap::iterator it = list.begin(); it != list.end(); ++it)
{
os << " <" << it.key() << ">";
os << HTTPRequest::Encode( *it );
os << "</" << it.key() << ">\r\n";
}
os << " </u:" << sMethod << ">\r\n";
os << " </s:Body>\r\n";
os << "</s:Envelope>\r\n";
os.flush();
// --------------------------------------------------------------
// Perform Request
// --------------------------------------------------------------
QBuffer buff(&aBuffer);
LOG(VB_UPNP, LOG_DEBUG,
QString("SOAPClient(%1) sending:\n").arg(url.toString()) +
header.toString() + QString("\n%1\n").arg(aBuffer.constData()));
QString sXml =
HttpComms::postHttp(url,
&header,
&buff, // QIODevice*
10000, // ms -- Technically should be 30ms per spec
3, // retries
0, // redirects
false, // allow gzip
NULL, // login
bInQtThread,
QString() // userAgent, UPnP/1.0 very strict on
// format if set
);
// --------------------------------------------------------------
// Parse response
// --------------------------------------------------------------
LOG(VB_UPNP, LOG_DEBUG, "SOAPClient response:\n" +
QString("%1\n").arg(sXml));
// TODO handle timeout without response correctly.
list.clear();
QDomDocument doc;
if (!doc.setContent(sXml, true, &sErrDesc, &nErrCode))
{
LOG(VB_UPNP, LOG_ERR,
QString("SendSOAPRequest( %1 ) - Invalid response from %2")
.arg(sMethod).arg(url.toString()) +
QString("%1: %2").arg(nErrCode).arg(sErrDesc));
return xmlResult;
}
// --------------------------------------------------------------
// Is this a valid response?
// --------------------------------------------------------------
QString sResponseName = sMethod + "Response";
QDomNodeList oNodeList =
doc.elementsByTagNameNS(m_sNamespace, sResponseName);
if (oNodeList.count() == 0)
{
// --------------------------------------------------------------
// Must be a fault... parse it to return reason
// --------------------------------------------------------------
nErrCode = GetNodeValue(
doc, "Envelope/Body/Fault/detail/UPnPError/errorCode", 500);
sErrDesc = GetNodeValue(
doc, "Envelope/Body/Fault/detail/UPnPError/errorDescription", "");
if (sErrDesc.isEmpty())
sErrDesc = QString("Unknown #%1").arg(nErrCode);
QDomNode oNode = FindNode( "Envelope/Body/Fault", doc );
oNode = xmlResult.importNode( oNode, true );
xmlResult.appendChild( oNode );
return xmlResult;
}
QDomNode oMethod = oNodeList.item(0);
if (oMethod.isNull())
return xmlResult;
QDomNode oNode = oMethod.firstChild();
for (; !oNode.isNull(); oNode = oNode.nextSibling())
{
QDomElement e = oNode.toElement();
if (e.isNull())
continue;
QString sName = e.tagName();
QString sValue = "";
QDomText oText = oNode.firstChild().toText();
if (!oText.isNull())
sValue = oText.nodeValue();
list.insert(QUrl::fromPercentEncoding(sName.toUtf8()),
QUrl::fromPercentEncoding(sValue.toUtf8()));
}
// Create copy of oMethod that can be used with xmlResult.
oMethod = xmlResult.importNode( oMethod.firstChild(), true );
// importNode does not attach the new nodes to the document,
// do it here.
xmlResult.appendChild( oMethod );
return xmlResult;
}
bool SOAPClient::SendSOAPRequest( const QString &sMethod,
QStringMap &list,
int &nErrCode,
QString &sErrDesc,
bool bInQtThread )
{
QUrl url( m_url );
url.setPath( m_sControlPath );
// --------------------------------------------------------------
// Add appropriate headers
// --------------------------------------------------------------
QHttpRequestHeader header;
header.setValue("CONTENT-TYPE", "text/xml; charset=\"utf-8\"" );
header.setValue("SOAPACTION" , QString( "\"%1#GetConnectionInfo\"" )
.arg( m_sNamespace ));
// --------------------------------------------------------------
// Build request payload
// --------------------------------------------------------------
QByteArray aBuffer;
QTextStream os( &aBuffer );
os << "<?xml version=\"1.0\" encoding=\"utf-8\"?>\r\n";
os << "<s:Envelope s:encodingStyle=\"http://schemas.xmlsoap.org/soap/encoding/\" xmlns:s=\"http://schemas.xmlsoap.org/soap/envelope/\">\r\n";
os << " <s:Body>\r\n";
os << " <u:" << sMethod << " xmlns:u=\"" << m_sNamespace << "\">\r\n";
// --------------------------------------------------------------
// Add parameters from list
// --------------------------------------------------------------
for ( QStringMap::iterator it = list.begin();
it != list.end();
++it )
{
os << " <" << it.key() << ">";
os << HTTPRequest::Encode( *it );
os << "</" << it.key() << ">\r\n";
}
os << " </u:" << sMethod << ">\r\n";
os << " </s:Body>\r\n";
os << "</s:Envelope>\r\n";
os.flush();
// --------------------------------------------------------------
// Perform Request
// --------------------------------------------------------------
QBuffer buff( &aBuffer );
QString sXml = HttpComms::postHttp( url,
&header,
(QIODevice *)&buff,
10000, // ms
3, // retries
0, // redirects
false, // allow gzip
NULL, // login
bInQtThread );
// --------------------------------------------------------------
// Parse response
// --------------------------------------------------------------
list.clear();
QDomDocument doc;
if ( !doc.setContent( sXml, true, &sErrDesc, &nErrCode ))
{
VERBOSE( VB_UPNP, QString( "MythXMLClient::SendSOAPRequest( %1 ) - Invalid response from %2" )
.arg( sMethod )
.arg( url.toString() ));
return false;
}
// --------------------------------------------------------------
// Is this a valid response?
// --------------------------------------------------------------
QString sResponseName = sMethod + "Response";
QDomNodeList oNodeList = doc.elementsByTagNameNS( m_sNamespace, sResponseName );
if (oNodeList.count() > 0)
{
QDomNode oMethod = oNodeList.item(0);
if (!oMethod.isNull())
{
for ( QDomNode oNode = oMethod.firstChild(); !oNode.isNull();
oNode = oNode.nextSibling() )
{
QDomElement e = oNode.toElement();
if (!e.isNull())
{
QString sName = e.tagName();
QString sValue = "";
QDomText oText = oNode.firstChild().toText();
if (!oText.isNull())
sValue = oText.nodeValue();
list.insert(QUrl::fromPercentEncoding(sName.toUtf8()),
QUrl::fromPercentEncoding(sValue.toUtf8()));
}
}
}
return true;
}
// --------------------------------------------------------------
// Must be a fault... parse it to return reason
// --------------------------------------------------------------
nErrCode = GetNodeValue( doc, "Envelope/Body/Fault/detail/UPnPResult/errorCode" , 500 );
sErrDesc = GetNodeValue( doc, "Envelope/Body/Fault/detail/UPnPResult/errorDescription", QString( "Unknown" ));
return false;
}
UPnPResultCode MythXMLClient::GetConnectionInfo( const QString &sPin, DatabaseParams *pParams, QString &sMsg )
{
if (pParams == NULL)
return UPnPResult_InvalidArgs;
int nErrCode = 0;
QString sErrDesc;
QStringMap list;
sMsg.clear();
list.insert( "Pin", sPin );
QDomDocument xmlResults = SendSOAPRequest(
"GetConnectionInfo", list, nErrCode, sErrDesc, m_bInQtThread);
// --------------------------------------------------------------
// Is this a valid response?
// --------------------------------------------------------------
QDomNode oNode = xmlResults.namedItem( "GetConnectionInfoResult" );
if (UPnPResult_Success == nErrCode && !oNode.isNull())
{
QDomNode dbNode = oNode.namedItem( "Database" );
pParams->dbHostName = GetNodeValue( dbNode, "Host" , QString());
pParams->dbPort = GetNodeValue( dbNode, "Port" , 0 );
pParams->dbUserName = GetNodeValue( dbNode, "UserName" , QString());
pParams->dbPassword = GetNodeValue( dbNode, "Password" , QString());
pParams->dbName = GetNodeValue( dbNode, "Name" , QString());
pParams->dbType = GetNodeValue( dbNode, "Type" , QString());
QDomNode wolNode = oNode.namedItem( "WOL" );
pParams->wolEnabled = GetNodeValue( wolNode, "Enabled" , false );
pParams->wolReconnect = GetNodeValue( wolNode, "Reconnect", 0 );
pParams->wolRetry = GetNodeValue( wolNode, "Retry" , 0 );
pParams->wolCommand = GetNodeValue( wolNode, "Command" , QString());
return UPnPResult_Success;
}
else
{
sMsg = sErrDesc;
LOG(VB_GENERAL, LOG_ERR,
QString("MythXMLClient::GetConnectionInfo Failed - (%1) %2")
.arg(nErrCode) .arg(sErrDesc));
}
if (( nErrCode == UPnPResult_HumanInterventionRequired ) ||
( nErrCode == UPnPResult_ActionNotAuthorized ) ||
( nErrCode == 501 ))
{
// Service calls no longer return UPnPResult codes,
// convert standard 501 to UPnPResult code for now.
return UPnPResult_ActionNotAuthorized;
}
return UPnPResult_ActionFailed;
}
UPnPResultCode MythXMLClient::GetConnectionInfo( const QString &sPin, DatabaseParams *pParams, QString &sMsg )
{
if (pParams == NULL)
return UPnPResult_InvalidArgs;
int nErrCode = 0;
QString sErrDesc;
QStringMap list;
sMsg.clear();
list.insert( "Pin", sPin );
if (SendSOAPRequest( "GetConnectionInfo", list, nErrCode, sErrDesc, m_bInQtThread ))
{
QString sXml = "<Info>" + list[ "Info" ] + "</Info>";
sMsg = sErrDesc;
QDomDocument doc;
if ( !doc.setContent( sXml, false, &sErrDesc, &nErrCode ))
{
sMsg = QObject::tr("Error Requesting Connection Info");
VERBOSE( VB_UPNP, QString( "Error Requesting Connection Info : (%1) - %2" )
.arg( nErrCode )
.arg( sErrDesc ) );
return UPnPResult_ActionFailed;
}
// --------------------------------------------------------------
// Is this a valid response?
// --------------------------------------------------------------
QDomNode infoNode = doc.namedItem( "Info" );
if (!infoNode.isNull())
{
QDomNode dbNode = infoNode.namedItem( "Database" );
pParams->dbHostName = GetNodeValue( dbNode, "Host" , QString( ));
pParams->dbPort = GetNodeValue( dbNode, "Port" , 0 );
pParams->dbUserName = GetNodeValue( dbNode, "UserName" , QString( ));
pParams->dbPassword = GetNodeValue( dbNode, "Password" , QString( ));
pParams->dbName = GetNodeValue( dbNode, "Name" , QString( ));
pParams->dbType = GetNodeValue( dbNode, "Type" , QString( ));
QDomNode wolNode = infoNode.namedItem( "WOL" );
pParams->wolEnabled = GetNodeValue( wolNode, "Enabled" , false );
pParams->wolReconnect = GetNodeValue( wolNode, "Reconnect", 0 );
pParams->wolRetry = GetNodeValue( wolNode, "Retry" , 0 );
pParams->wolCommand = GetNodeValue( wolNode, "Command" , QString( ));
return UPnPResult_Success;
}
else
{
if (sMsg.isEmpty())
sMsg = QObject::tr("Unexpected Response");
VERBOSE( VB_IMPORTANT, QString( "MythXMLClient::GetConnectionInfo Failed : Unexpected Response - %1" )
.arg( sXml ));
}
}
else
{
sMsg = sErrDesc;
if (sMsg.isEmpty())
sMsg = QObject::tr("Access Denied");
VERBOSE( VB_IMPORTANT, QString( "MythXMLClient::GetConnectionInfo Failed - (%1) %2" )
.arg( nErrCode )
.arg( sErrDesc ));
}
if (UPnPResult_HumanInterventionRequired == nErrCode
|| UPnPResult_ActionNotAuthorized == nErrCode)
return (UPnPResultCode)nErrCode;
return UPnPResult_ActionFailed;
}
UPnPResultCode MythXMLClient::GetConnectionInfo( const QString &sPin, DatabaseParams *pParams, QString &sMsg )
{
if (pParams == NULL)
return UPnPResult_InvalidArgs;
int nErrCode = 0;
QString sErrDesc;
QStringMap list;
sMsg.clear();
list.insert( "Pin", sPin );
QDomDocument xmlResults = SendSOAPRequest(
"GetConnectionInfo", list, nErrCode, sErrDesc, m_bInQtThread);
// --------------------------------------------------------------
// Is this a valid response?
// --------------------------------------------------------------
QDomNode oNode = xmlResults.namedItem( "GetConnectionInfoResult" );
if (UPnPResult_Success == nErrCode && !oNode.isNull())
{
QDomNode dbNode = oNode.namedItem( "Database" );
pParams->dbHostName = GetNodeValue( dbNode, "Host" , QString());
pParams->dbPort = GetNodeValue( dbNode, "Port" , 0 );
pParams->dbUserName = GetNodeValue( dbNode, "UserName" , QString());
pParams->dbPassword = GetNodeValue( dbNode, "Password" , QString());
pParams->dbName = GetNodeValue( dbNode, "Name" , QString());
pParams->dbType = GetNodeValue( dbNode, "Type" , QString());
QDomNode wolNode = oNode.namedItem( "WOL" );
pParams->wolEnabled = GetNodeValue( wolNode, "Enabled" , false );
pParams->wolReconnect = GetNodeValue( wolNode, "Reconnect", 0 );
pParams->wolRetry = GetNodeValue( wolNode, "Retry" , 0 );
pParams->wolCommand = GetNodeValue( wolNode, "Command" , QString());
QDomNode verNode = oNode.namedItem( "Version" );
pParams->verVersion = GetNodeValue( verNode, "Version" , "" );
pParams->verBranch = GetNodeValue( verNode, "Branch" , "" );
pParams->verProtocol = GetNodeValue( verNode, "Protocol" , "" );
pParams->verBinary = GetNodeValue( verNode, "Binary" , "" );
pParams->verSchema = GetNodeValue( verNode, "Schema" , "" );
if ((pParams->verProtocol != MYTH_PROTO_VERSION) ||
(pParams->verSchema != MYTH_DATABASE_VERSION))
// incompatible version, we cannot use this backend
{
LOG(VB_GENERAL, LOG_ERR,
QString("MythXMLClient::GetConnectionInfo Failed - "
"Version Mismatch (%1,%2) != (%3,%4)")
.arg(pParams->verProtocol)
.arg(pParams->verSchema)
.arg(MYTH_PROTO_VERSION)
.arg(MYTH_DATABASE_VERSION));
sMsg = QObject::tr("Version Mismatch", "UPNP Errors");
return UPnPResult_ActionFailed;
}
return UPnPResult_Success;
}
else
{
sMsg = sErrDesc;
LOG(VB_GENERAL, LOG_ERR,
QString("MythXMLClient::GetConnectionInfo Failed - (%1) %2")
.arg(nErrCode) .arg(sErrDesc));
}
if (( nErrCode == UPnPResult_HumanInterventionRequired ) ||
( nErrCode == UPnPResult_ActionNotAuthorized ) ||
( nErrCode == 501 ))
{
// Service calls no longer return UPnPResult codes,
// convert standard 501 to UPnPResult code for now.
sMsg = QObject::tr("Not Authorized", "UPNP Errors");
return UPnPResult_ActionNotAuthorized;
}
sMsg = QObject::tr("Unknown Error", "UPNP Errors");
return UPnPResult_ActionFailed;
}
