double QgsComposerScaleBar::mapDiagonal() const
{
if ( !mComposerMap )
{
return 0.0;
}
QgsRectangle composerMapRect = mComposerMap->extent();
if ( mUnits == MapUnits )
{
return sqrt( composerMapRect.width() * composerMapRect.width() + composerMapRect.height() * composerMapRect.height() );
}
else
{
QgsDistanceArea da;
da.setProjectionsEnabled( true );
da.setSourceCrs( mComposerMap->mapRenderer()->destinationCrs().srsid() );
QSettings s;
da.setEllipsoid( s.value( "/qgis/measure/ellipsoid", "WGS84" ).toString() );
double measure = da.measureLine( QgsPoint( composerMapRect.xMinimum(), composerMapRect.yMaximum() ), QgsPoint( composerMapRect.xMaximum(), composerMapRect.yMinimum() ) );
if ( mUnits == Feet )
{
measure /= 0.3048;
}
return measure;
}
}
void QgsMeasureDialog::configureDistanceArea( QgsDistanceArea& da )
{
QSettings settings;
QString ellipsoidId = settings.value( "/qgis/measure/ellipsoid", "WGS84" ).toString();
da.setSourceCrs( mTool->canvas()->mapRenderer()->destinationCrs().srsid() );
da.setEllipsoid( ellipsoidId );
da.setProjectionsEnabled( mcbProjectionEnabled->isChecked() );
}
void QgsMapToolMeasureAngle::configureDistanceArea( QgsDistanceArea& da )
{
QSettings settings;
QString ellipsoidId = settings.value( "/qgis/measure/ellipsoid", "WGS84" ).toString();
da.setSourceCrs( mCanvas->mapRenderer()->destinationCrs().srsid() );
da.setEllipsoid( ellipsoidId );
da.setProjectionsEnabled( mResultDisplay->projectionEnabled() );
}
void GlobePlugin::syncExtent()
{
osgEarth::Util::EarthManipulator* manip = dynamic_cast<osgEarth::Util::EarthManipulator*>( viewer.getCameraManipulator() );
//rotate earth to north and perpendicular to camera
manip->setRotation( osg::Quat() );
//get mapCanvas->extent().height() in meters
QgsRectangle extent = mQGisIface->mapCanvas()->extent();
QgsDistanceArea dist;
dist.setProjectionsEnabled( true );
QgsPoint ll = QgsPoint( extent.xMinimum(), extent.yMinimum() );
QgsPoint ul = QgsPoint( extent.xMinimum(), extent.yMaximum() );
double height = dist.measureLine( ll, ul );
//camera viewing angle
double viewAngle = 30;
//camera distance
double distance = height / tan( viewAngle * osg::PI / 180 ); //c = b*cotan(B(rad))
OE_NOTICE << "map extent: " << height << " camera distance: " << distance << std::endl;
osgEarth::Util::Viewpoint viewpoint( osg::Vec3d( extent.center().x(), extent.center().y(), 0.0 ), 0.0, -90.0, distance );
manip->setViewpoint( viewpoint, 4.0 );
}
void RgLineVectorLayerDirector::makeGraph( RgGraphBuilder *builder, const QVector< QgsPoint >& additionalPoints,
QVector< QgsPoint >& tiedPoint ) const
{
QgsVectorLayer *vl = myLayer();
if ( vl == NULL )
return;
int featureCount = ( int ) vl->featureCount() * 2;
int step = 0;
QgsCoordinateTransform ct;
QgsDistanceArea da;
ct.setSourceCrs( vl->crs() );
if ( builder->coordinateTransformEnabled() )
{
ct.setDestCRS( builder->destinationCrs() );
da.setProjectionsEnabled( true );
//
//da.setSourceCrs( builder->destinationCrs().srsid() );
//
}
else
{
ct.setDestCRS( vl->crs() );
da.setProjectionsEnabled( false );
}
tiedPoint = QVector< QgsPoint >( additionalPoints.size(), QgsPoint( 0.0, 0.0 ) );
TiePointInfo tmpInfo;
tmpInfo.mLength = infinity();
QVector< TiePointInfo > pointLengthMap( additionalPoints.size(), tmpInfo );
QVector< TiePointInfo >::iterator pointLengthIt;
// begin: tie points to the graph
QgsAttributeList la;
vl->select( la );
QgsFeature feature;
while ( vl->nextFeature( feature ) )
{
QgsMultiPolyline mpl;
if ( feature.geometry()->wkbType() == QGis::WKBLineString )
{
mpl.push_back( feature.geometry()->asPolyline() );
}else if ( feature.geometry()->wkbType() == QGis::WKBMultiLineString )
{
mpl = feature.geometry()->asMultiPolyline();
}
QgsMultiPolyline::iterator mplIt;
for ( mplIt = mpl.begin(); mplIt != mpl.end(); ++mplIt )
{
QgsPoint pt1, pt2;
bool isFirstPoint = true;
QgsPolyline::iterator pointIt;
for ( pointIt = mplIt->begin(); pointIt != mplIt->end(); ++pointIt )
{
pt2 = builder->addVertex( ct.transform( *pointIt ) );
if ( !isFirstPoint )
{
int i = 0;
for ( i = 0; i != additionalPoints.size(); ++i )
{
TiePointInfo info;
if ( pt1 == pt2 )
{
info.mLength = additionalPoints[ i ].sqrDist( pt1 );
info.mTiedPoint = pt1;
}
else
{
info.mLength = additionalPoints[ i ].sqrDistToSegment( pt1.x(), pt1.y(), pt2.x(), pt2.y(), info.mTiedPoint );
}
if ( pointLengthMap[ i ].mLength > info.mLength )
{
info.mTiedPoint = builder->addVertex( info.mTiedPoint );
info.mFirstPoint = pt1;
info.mLastPoint = pt2;
pointLengthMap[ i ] = info;
tiedPoint[ i ] = info.mTiedPoint;
}
}
}
pt1 = pt2;
isFirstPoint = false;
}
}
emit buildProgress( ++step, featureCount );
}
// end: tie points to graph
if ( mDirectionFieldId != -1 )
{
la.push_back( mDirectionFieldId );
}
if ( mSpeedFieldId != -1 )
{
la.push_back( mSpeedFieldId );
}
SpeedUnit su = SpeedUnit::byName( mSpeedUnitName );
// begin graph construction
vl->select( la );
while ( vl->nextFeature( feature ) )
{
QgsAttributeMap attr = feature.attributeMap();
int directionType = mDefaultDirection;
QgsAttributeMap::const_iterator it;
// What direction have feature?
for ( it = attr.constBegin(); it != attr.constEnd(); ++it )
{
if ( it.key() != mDirectionFieldId )
{
continue;
}
QString str = it.value().toString();
if ( str == mBothDirectionValue )
{
directionType = 3;
}
else if ( str == mDirectDirectionValue )
{
directionType = 1;
}
else if ( str == mReverseDirectionValue )
{
directionType = 2;
}
}
// What speed have feature?
double speed = 0.0;
for ( it = attr.constBegin(); it != attr.constEnd(); ++it )
{
if ( it.key() != mSpeedFieldId )
{
continue;
}
speed = it.value().toDouble();
}
if ( speed <= 0.0 )
{
speed = mDefaultSpeed;
}
// begin features segments and add arc to the Graph;
QgsMultiPolyline mpl;
if ( feature.geometry()->wkbType() == QGis::WKBLineString )
{
mpl.push_back( feature.geometry()->asPolyline() );
}else if ( feature.geometry()->wkbType() == QGis::WKBMultiLineString )
{
mpl = feature.geometry()->asMultiPolyline();
}
QgsMultiPolyline::iterator mplIt;
for ( mplIt = mpl.begin(); mplIt != mpl.end(); ++mplIt )
{
QgsPoint pt1, pt2;
bool isFirstPoint = true;
QgsPolyline::iterator pointIt;
for ( pointIt = mplIt->begin(); pointIt != mplIt->end(); ++pointIt )
{
pt2 = builder->addVertex( ct.transform( *pointIt ) );
std::map< double, QgsPoint > pointsOnArc;
pointsOnArc[ 0.0 ] = pt1;
pointsOnArc[ pt1.sqrDist( pt2 )] = pt2;
for ( pointLengthIt = pointLengthMap.begin(); pointLengthIt != pointLengthMap.end(); ++pointLengthIt )
{
if ( pointLengthIt->mFirstPoint == pt1 && pointLengthIt->mLastPoint == pt2 )
{
QgsPoint tiedPoint = pointLengthIt->mTiedPoint;
pointsOnArc[ pt1.sqrDist( tiedPoint )] = tiedPoint;
}
}
if ( !isFirstPoint )
{
std::map< double, QgsPoint >::iterator pointsIt;
QgsPoint pt1;
QgsPoint pt2;
bool isFirstPoint = true;
for ( pointsIt = pointsOnArc.begin(); pointsIt != pointsOnArc.end(); ++pointsIt )
{
pt2 = pointsIt->second;
if ( !isFirstPoint )
{
double cost = da.measureLine( pt1, pt2 );
if ( directionType == 1 ||
directionType == 3 )
{
builder->addArc( pt1, pt2, cost, speed*su.multipler(), feature.id() );
}
if ( directionType == 2 ||
directionType == 3 )
{
builder->addArc( pt2, pt1, cost, speed*su.multipler(), feature.id() );
}
}
pt1 = pt2;
isFirstPoint = false;
}
} // if ( !isFirstPoint )
pt1 = pt2;
isFirstPoint = false;
}
} // for (it = pl.begin(); it != pl.end(); ++it)
emit buildProgress( ++step, featureCount );
} // while( vl->nextFeature(feature) )
} // makeGraph( RgGraphBuilder *builder, const QgsRectangle& rt )
bool QgsMapToolIdentify::identifyVectorLayer( QgsVectorLayer *layer, int x, int y )
{
if ( !layer )
return false;
QMap< QString, QString > attributes, derivedAttributes;
QgsPoint point = mCanvas->getCoordinateTransform()->toMapCoordinates( x, y );
derivedAttributes.insert( tr( "(clicked coordinate)" ), point.toString() );
// load identify radius from settings
QSettings settings;
double identifyValue = settings.value( "/Map/identifyRadius", QGis::DEFAULT_IDENTIFY_RADIUS ).toDouble();
QString ellipsoid = settings.value( "/qgis/measure/ellipsoid", "WGS84" ).toString();
if ( identifyValue <= 0.0 )
identifyValue = QGis::DEFAULT_IDENTIFY_RADIUS;
int featureCount = 0;
QgsFeatureList featureList;
// toLayerCoordinates will throw an exception for an 'invalid' point.
// For example, if you project a world map onto a globe using EPSG 2163
// and then click somewhere off the globe, an exception will be thrown.
try
{
// create the search rectangle
double searchRadius = mCanvas->extent().width() * ( identifyValue / 100.0 );
QgsRectangle r;
r.setXMinimum( point.x() - searchRadius );
r.setXMaximum( point.x() + searchRadius );
r.setYMinimum( point.y() - searchRadius );
r.setYMaximum( point.y() + searchRadius );
r = toLayerCoordinates( layer, r );
layer->select( layer->pendingAllAttributesList(), r, true, true );
QgsFeature f;
while ( layer->nextFeature( f ) )
featureList << QgsFeature( f );
}
catch ( QgsCsException & cse )
{
Q_UNUSED( cse );
// catch exception for 'invalid' point and proceed with no features found
QgsDebugMsg( QString( "Caught CRS exception %1" ).arg( cse.what() ) );
}
// init distance/area calculator
QgsDistanceArea calc;
if ( !featureList.count() == 0 )
{
calc.setProjectionsEnabled( mCanvas->hasCrsTransformEnabled() ); // project?
calc.setEllipsoid( ellipsoid );
calc.setSourceCrs( layer->crs().srsid() );
}
QgsFeatureList::iterator f_it = featureList.begin();
for ( ; f_it != featureList.end(); ++f_it )
{
featureCount++;
QgsFeatureId fid = f_it->id();
QMap<QString, QString> derivedAttributes;
// Calculate derived attributes and insert:
// measure distance or area depending on geometry type
if ( layer->geometryType() == QGis::Line )
{
double dist = calc.measure( f_it->geometry() );
QGis::UnitType myDisplayUnits;
convertMeasurement( calc, dist, myDisplayUnits, false );
QString str = calc.textUnit( dist, 3, myDisplayUnits, false ); // dist and myDisplayUnits are out params
derivedAttributes.insert( tr( "Length" ), str );
if ( f_it->geometry()->wkbType() == QGis::WKBLineString ||
f_it->geometry()->wkbType() == QGis::WKBLineString25D )
{
// Add the start and end points in as derived attributes
str = QLocale::system().toString( f_it->geometry()->asPolyline().first().x(), 'g', 10 );
derivedAttributes.insert( tr( "firstX", "attributes get sorted; translation for lastX should be lexically larger than this one" ), str );
str = QLocale::system().toString( f_it->geometry()->asPolyline().first().y(), 'g', 10 );
derivedAttributes.insert( tr( "firstY" ), str );
str = QLocale::system().toString( f_it->geometry()->asPolyline().last().x(), 'g', 10 );
derivedAttributes.insert( tr( "lastX", "attributes get sorted; translation for firstX should be lexically smaller than this one" ), str );
str = QLocale::system().toString( f_it->geometry()->asPolyline().last().y(), 'g', 10 );
derivedAttributes.insert( tr( "lastY" ), str );
}
}
else if ( layer->geometryType() == QGis::Polygon )
{
double area = calc.measure( f_it->geometry() );
QGis::UnitType myDisplayUnits;
convertMeasurement( calc, area, myDisplayUnits, true ); // area and myDisplayUnits are out params
QString str = calc.textUnit( area, 3, myDisplayUnits, true );
derivedAttributes.insert( tr( "Area" ), str );
}
else if ( layer->geometryType() == QGis::Point &&
( f_it->geometry()->wkbType() == QGis::WKBPoint ||
f_it->geometry()->wkbType() == QGis::WKBPoint25D ) )
{
// Include the x and y coordinates of the point as a derived attribute
QString str;
str = QLocale::system().toString( f_it->geometry()->asPoint().x(), 'g', 10 );
derivedAttributes.insert( "X", str );
str = QLocale::system().toString( f_it->geometry()->asPoint().y(), 'g', 10 );
derivedAttributes.insert( "Y", str );
}
derivedAttributes.insert( tr( "feature id" ), fid < 0 ? tr( "new feature" ) : FID_TO_STRING( fid ) );
results()->addFeature( layer, *f_it, derivedAttributes );
}
QgsDebugMsg( "Feature count on identify: " + QString::number( featureCount ) );
return featureCount > 0;
}
