void QgsGeometryCheck::deleteFeatureGeometryPart( const QString &layerId, QgsFeature &feature, int partIdx, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[layerId];
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *geom = featureGeom.get();
if ( dynamic_cast<QgsGeometryCollection *>( geom ) )
{
static_cast<QgsGeometryCollection *>( geom )->removeGeometry( partIdx );
if ( static_cast<QgsGeometryCollection *>( geom )->numGeometries() == 0 )
{
featurePool->deleteFeature( feature.id() );
changes[layerId][feature.id()].append( Change( ChangeFeature, ChangeRemoved ) );
}
else
{
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
changes[layerId][feature.id()].append( Change( ChangePart, ChangeRemoved, QgsVertexId( partIdx ) ) );
}
}
else
{
featurePool->deleteFeature( feature.id() );
changes[layerId][feature.id()].append( Change( ChangeFeature, ChangeRemoved ) );
}
}
void QgsGeometryCheck::deleteFeatureGeometryRing( const QString &layerId, QgsFeature &feature, int partIdx, int ringIdx, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[layerId];
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *partGeom = QgsGeometryCheckerUtils::getGeomPart( featureGeom.get(), partIdx );
if ( dynamic_cast<QgsCurvePolygon *>( partGeom ) )
{
// If we delete the exterior ring of a polygon, it makes no sense to keep the interiors
if ( ringIdx == 0 )
{
deleteFeatureGeometryPart( layerId, feature, partIdx, changes );
}
else
{
static_cast<QgsCurvePolygon *>( partGeom )->removeInteriorRing( ringIdx - 1 );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
changes[layerId][feature.id()].append( Change( ChangeRing, ChangeRemoved, QgsVertexId( partIdx, ringIdx ) ) );
}
}
// Other geometry types do not have rings, remove the entire part
else
{
deleteFeatureGeometryPart( layerId, feature, partIdx, changes );
}
}
void QgsGeometryHoleCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->get( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
const QgsAbstractGeometry *geom = featureGeom.constGet();
QgsVertexId vidx = error->vidx();
// Check if ring still exists
if ( !vidx.isValid( geom ) )
{
error->setObsolete();
return;
}
// Fix error
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == RemoveHoles )
{
deleteFeatureGeometryRing( error->layerId(), feature, vidx.part, vidx.ring, changes );
error->setFixed( method );
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometryDuplicateNodesCheck::fixError( const QMap<QString, QgsFeaturePool *> &featurePools, QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->getFeature( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *geom = featureGeom.get();
QgsVertexId vidx = error->vidx();
// Check if point still exists
if ( !vidx.isValid( geom ) )
{
error->setObsolete();
return;
}
// Check if error still applies
int nVerts = QgsGeometryCheckerUtils::polyLineSize( geom, vidx.part, vidx.ring );
QgsPoint pi = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, ( vidx.vertex + nVerts - 1 ) % nVerts ) );
QgsPoint pj = geom->vertexAt( error->vidx() );
if ( QgsGeometryUtils::sqrDistance2D( pi, pj ) >= mContext->tolerance )
{
error->setObsolete();
return;
}
// Fix error
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == RemoveDuplicates )
{
if ( !QgsGeometryCheckerUtils::canDeleteVertex( geom, vidx.part, vidx.ring ) )
{
error->setFixFailed( tr( "Resulting geometry is degenerate" ) );
}
else if ( !geom->deleteVertex( error->vidx() ) )
{
error->setFixFailed( tr( "Failed to delete vertex" ) );
}
else
{
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
error->setFixed( method );
changes[error->layerId()][error->featureId()].append( Change( ChangeNode, ChangeRemoved, error->vidx() ) );
}
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometryAreaCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> &mergeAttributeIndices, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->get( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
double layerToMapUnits = featurePool->getLayerToMapUnits();
QgsGeometry g = feature.geometry();
const QgsAbstractGeometry *geom = g.constGet();
QgsVertexId vidx = error->vidx();
// Check if polygon still exists
if ( !vidx.isValid( geom ) )
{
error->setObsolete();
return;
}
// Check if error still applies
double value;
if ( !checkThreshold( layerToMapUnits, QgsGeometryCheckerUtils::getGeomPart( geom, vidx.part ), value ) )
{
error->setObsolete();
return;
}
// Fix with selected method
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == Delete )
{
deleteFeatureGeometryPart( error->layerId(), feature, vidx.part, changes );
error->setFixed( method );
}
else if ( method == MergeLongestEdge || method == MergeLargestArea || method == MergeIdenticalAttribute )
{
QString errMsg;
if ( mergeWithNeighbor( error->layerId(), feature, vidx.part, method, mergeAttributeIndices[error->layerId()], changes, errMsg ) )
{
error->setFixed( method );
}
else
{
error->setFixFailed( tr( "Failed to merge with neighbor: %1" ).arg( errMsg ) );
}
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometryContainedCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsGeometryContainedCheckError *containerError = static_cast<QgsGeometryContainedCheckError *>( error );
QgsFeaturePool *featurePoolA = mContext->featurePools[ error->layerId() ];
QgsFeaturePool *featurePoolB = mContext->featurePools[ containerError->containingFeature().first ];
QgsFeature featureA;
QgsFeature featureB;
if ( !featurePoolA->get( error->featureId(), featureA ) ||
!featurePoolB->get( containerError->containingFeature().second, featureB ) )
{
error->setObsolete();
return;
}
// Check if error still applies
QgsGeometryCheckerUtils::LayerFeature layerFeatureA( featurePoolA, featureA, true );
QgsGeometryCheckerUtils::LayerFeature layerFeatureB( featurePoolB, featureB, true );
std::unique_ptr< QgsGeometryEngine > geomEngineA = QgsGeometryCheckerUtils::createGeomEngine( layerFeatureA.geometry(), mContext->tolerance );
std::unique_ptr< QgsGeometryEngine > geomEngineB = QgsGeometryCheckerUtils::createGeomEngine( layerFeatureB.geometry(), mContext->tolerance );
if ( !( geomEngineB->contains( layerFeatureA.geometry() ) && !geomEngineA->contains( layerFeatureB.geometry() ) ) )
{
error->setObsolete();
return;
}
// Fix error
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == Delete )
{
changes[error->layerId()][featureA.id()].append( Change( ChangeFeature, ChangeRemoved ) );
featurePoolA->deleteFeature( featureA.id() );
error->setFixed( method );
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometryMultipartCheck::fixError( const QMap<QString, QgsFeaturePool *> &featurePools, QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->getFeature( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
const QgsAbstractGeometry *geom = featureGeom.constGet();
// Check if error still applies
if ( geom->partCount() > 1 || !QgsWkbTypes::isMultiType( geom->wkbType() ) )
{
error->setObsolete();
return;
}
// Fix error
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == ConvertToSingle )
{
feature.setGeometry( QgsGeometry( QgsGeometryCheckerUtils::getGeomPart( geom, 0 )->clone() ) );
featurePool->updateFeature( feature );
error->setFixed( method );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
else if ( method == RemoveObject )
{
featurePool->deleteFeature( feature.id() );
error->setFixed( method );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeRemoved ) );
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
void QgsGeometryCheck::replaceFeatureGeometryPart( const QString &layerId, QgsFeature &feature, int partIdx, QgsAbstractGeometry *newPartGeom, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[layerId];
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *geom = featureGeom.get();
if ( QgsGeometryCollection *geomCollection = dynamic_cast< QgsGeometryCollection *>( geom ) )
{
geomCollection->removeGeometry( partIdx );
geomCollection->addGeometry( newPartGeom );
changes[layerId][feature.id()].append( Change( ChangePart, ChangeRemoved, QgsVertexId( partIdx ) ) );
changes[layerId][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geomCollection->partCount() - 1 ) ) );
feature.setGeometry( featureGeom );
}
else
{
feature.setGeometry( QgsGeometry( newPartGeom ) );
changes[layerId][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
featurePool->updateFeature( feature );
}
void QgsGeometryValidationService::fixError( QgsGeometryCheckError *error, int method )
{
QgsGeometryCheck::Changes changes;
error->check()->fixError( mFeaturePools, error, method, QMap<QString, int>(), changes );
error->setFixed( method );
QgsFeaturePool *featurePool = mFeaturePools.value( error->layerId() );
QgsVectorLayer *layer = nullptr;
if ( featurePool )
layer = featurePool->layer();
else
{
// Some checks don't tell us on which layer they are because they are able to do cross-layer checks.
// E.g. the gap check will report in such a way
for ( auto layerCheck = mLayerChecks.constBegin(); layerCheck != mLayerChecks.constEnd(); ++layerCheck )
{
const QList<std::shared_ptr<QgsGeometryCheckError>> &topologyCheckErrors = layerCheck.value().topologyCheckErrors;
for ( const auto &checkError : topologyCheckErrors )
{
if ( checkError.get() == error )
{
layer = layerCheck.key();
break;
}
}
}
}
if ( layer )
{
layer->triggerRepaint();
emit topologyErrorUpdated( layer, error );
}
}
void QgsGeometryOverlapCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QString errMsg;
QgsGeometryOverlapCheckError *overlapError = static_cast<QgsGeometryOverlapCheckError *>( error );
QgsFeaturePool *featurePoolA = mContext->featurePools[ overlapError->layerId() ];
QgsFeaturePool *featurePoolB = mContext->featurePools[ overlapError->overlappedFeature().first ];
QgsFeature featureA;
QgsFeature featureB;
if ( !featurePoolA->get( overlapError->featureId(), featureA ) ||
!featurePoolB->get( overlapError->overlappedFeature().second, featureB ) )
{
error->setObsolete();
return;
}
// Check if error still applies
QgsGeometryCheckerUtils::LayerFeature layerFeatureA( featurePoolA, featureA, true );
QgsGeometryCheckerUtils::LayerFeature layerFeatureB( featurePoolB, featureB, true );
std::unique_ptr< QgsGeometryEngine > geomEngineA = QgsGeometryCheckerUtils::createGeomEngine( layerFeatureA.geometry(), mContext->reducedTolerance );
if ( !geomEngineA->overlaps( layerFeatureB.geometry() ) )
{
error->setObsolete();
return;
}
std::unique_ptr< QgsAbstractGeometry > interGeom( geomEngineA->intersection( layerFeatureB.geometry(), &errMsg ) );
if ( !interGeom )
{
error->setFixFailed( tr( "Failed to compute intersection between overlapping features: %1" ).arg( errMsg ) );
return;
}
// Search which overlap part this error parametrizes (using fuzzy-matching of the area and centroid...)
QgsAbstractGeometry *interPart = nullptr;
for ( int iPart = 0, nParts = interGeom->partCount(); iPart < nParts; ++iPart )
{
QgsAbstractGeometry *part = QgsGeometryCheckerUtils::getGeomPart( interGeom.get(), iPart );
if ( std::fabs( part->area() - overlapError->value().toDouble() ) < mContext->reducedTolerance &&
QgsGeometryCheckerUtils::pointsFuzzyEqual( part->centroid(), overlapError->location(), mContext->reducedTolerance ) )
{
interPart = part;
break;
}
}
if ( !interPart || interPart->isEmpty() )
{
error->setObsolete();
return;
}
// Fix error
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == Subtract )
{
std::unique_ptr< QgsAbstractGeometry > diff1( geomEngineA->difference( interPart, &errMsg ) );
if ( !diff1 || diff1->isEmpty() )
{
diff1.reset();
}
else
{
QgsGeometryCheckerUtils::filter1DTypes( diff1.get() );
}
std::unique_ptr< QgsGeometryEngine > geomEngineB = QgsGeometryCheckerUtils::createGeomEngine( layerFeatureB.geometry(), mContext->reducedTolerance );
std::unique_ptr< QgsAbstractGeometry > diff2( geomEngineB->difference( interPart, &errMsg ) );
if ( !diff2 || diff2->isEmpty() )
{
diff2.reset();
}
else
{
QgsGeometryCheckerUtils::filter1DTypes( diff2.get() );
}
double shared1 = diff1 ? QgsGeometryCheckerUtils::sharedEdgeLength( diff1.get(), interPart, mContext->reducedTolerance ) : 0;
double shared2 = diff2 ? QgsGeometryCheckerUtils::sharedEdgeLength( diff2.get(), interPart, mContext->reducedTolerance ) : 0;
if ( !diff1 || !diff2 || shared1 == 0. || shared2 == 0. )
{
error->setFixFailed( tr( "Could not find shared edges between intersection and overlapping features" ) );
}
else
{
if ( shared1 < shared2 )
{
diff1->transform( featurePoolA->getLayerToMapTransform(), QgsCoordinateTransform::ReverseTransform );
featureA.setGeometry( QgsGeometry( std::move( diff1 ) ) );
changes[error->layerId()][featureA.id()].append( Change( ChangeFeature, ChangeChanged ) );
featurePoolA->updateFeature( featureA );
}
else
{
diff2->transform( featurePoolB->getLayerToMapTransform(), QgsCoordinateTransform::ReverseTransform );
featureB.setGeometry( QgsGeometry( std::move( diff2 ) ) );
changes[overlapError->overlappedFeature().first][featureB.id()].append( Change( ChangeFeature, ChangeChanged ) );
featurePoolB->updateFeature( featureB );
}
error->setFixed( method );
}
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
bool QgsGeometryAreaCheck::mergeWithNeighbor( const QString &layerId, QgsFeature &feature, int partIdx, int method, int mergeAttributeIndex, Changes &changes, QString &errMsg ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[ layerId ];
double maxVal = 0.;
QgsFeature mergeFeature;
int mergePartIdx = -1;
bool matchFound = false;
QgsGeometry featureGeometry = feature.geometry();
const QgsAbstractGeometry *geom = featureGeometry.constGet();
// Search for touching neighboring geometries
const QgsFeatureIds intersects = featurePool->getIntersects( featureGeometry.boundingBox() );
for ( QgsFeatureId testId : intersects )
{
QgsFeature testFeature;
if ( !featurePool->get( testId, testFeature ) )
{
continue;
}
QgsGeometry testFeatureGeom = testFeature.geometry();
const QgsAbstractGeometry *testGeom = testFeatureGeom.constGet();
for ( int testPartIdx = 0, nTestParts = testGeom->partCount(); testPartIdx < nTestParts; ++testPartIdx )
{
if ( testId == feature.id() && testPartIdx == partIdx )
{
continue;
}
double len = QgsGeometryCheckerUtils::sharedEdgeLength( QgsGeometryCheckerUtils::getGeomPart( geom, partIdx ), QgsGeometryCheckerUtils::getGeomPart( testGeom, testPartIdx ), mContext->reducedTolerance );
if ( len > 0. )
{
if ( method == MergeLongestEdge || method == MergeLargestArea )
{
double val;
if ( method == MergeLongestEdge )
{
val = len;
}
else
{
if ( dynamic_cast<const QgsGeometryCollection *>( testGeom ) )
val = static_cast<const QgsGeometryCollection *>( testGeom )->geometryN( testPartIdx )->area();
else
val = testGeom->area();
}
if ( val > maxVal )
{
maxVal = val;
mergeFeature = testFeature;
mergePartIdx = testPartIdx;
}
}
else if ( method == MergeIdenticalAttribute )
{
if ( testFeature.attribute( mergeAttributeIndex ) == feature.attribute( mergeAttributeIndex ) )
{
mergeFeature = testFeature;
mergePartIdx = testPartIdx;
matchFound = true;
break;
}
}
}
}
if ( matchFound )
{
break;
}
}
if ( !matchFound && maxVal == 0. )
{
return method == MergeIdenticalAttribute;
}
// Merge geometries
QgsGeometry mergeFeatureGeom = mergeFeature.geometry();
const QgsAbstractGeometry *mergeGeom = mergeFeatureGeom.constGet();
std::unique_ptr<QgsGeometryEngine> geomEngine( QgsGeometryCheckerUtils::createGeomEngine( QgsGeometryCheckerUtils::getGeomPart( mergeGeom, mergePartIdx ), mContext->reducedTolerance ) );
QgsAbstractGeometry *combinedGeom = geomEngine->combine( QgsGeometryCheckerUtils::getGeomPart( geom, partIdx ), &errMsg );
if ( !combinedGeom || combinedGeom->isEmpty() || !QgsWkbTypes::isSingleType( combinedGeom->wkbType() ) )
{
return false;
}
// Replace polygon in merge geometry
if ( mergeFeature.id() == feature.id() && mergePartIdx > partIdx )
{
--mergePartIdx;
}
replaceFeatureGeometryPart( layerId, mergeFeature, mergePartIdx, combinedGeom, changes );
// Remove polygon from source geometry
deleteFeatureGeometryPart( layerId, feature, partIdx, changes );
return true;
}
void QgsGeometryTypeCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->get( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
const QgsAbstractGeometry *geom = featureGeom.constGet();
// Check if error still applies
QgsWkbTypes::Type type = QgsWkbTypes::flatType( geom->wkbType() );
if ( ( mAllowedTypes & ( 1 << type ) ) != 0 )
{
error->setObsolete();
return;
}
// Fix with selected method
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == Convert )
{
// Check if corresponding single type is allowed
if ( QgsWkbTypes::isMultiType( type ) && ( ( 1 << QgsWkbTypes::singleType( type ) ) & mAllowedTypes ) != 0 )
{
// Explode multi-type feature into single-type features
for ( int iPart = 1, nParts = geom->partCount(); iPart < nParts; ++iPart )
{
QgsFeature newFeature;
newFeature.setAttributes( feature.attributes() );
newFeature.setGeometry( QgsGeometry( QgsGeometryCheckerUtils::getGeomPart( geom, iPart )->clone() ) );
featurePool->addFeature( newFeature );
changes[error->layerId()][newFeature.id()].append( Change( ChangeFeature, ChangeAdded ) );
}
// Recycle feature for part 0
feature.setGeometry( QgsGeometry( QgsGeometryCheckerUtils::getGeomPart( geom, 0 )->clone() ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
// Check if corresponding multi type is allowed
else if ( QgsWkbTypes::isSingleType( type ) && ( ( 1 << QgsWkbTypes::multiType( type ) ) & mAllowedTypes ) != 0 )
{
QgsGeometryCollection *geomCollection = nullptr;
switch ( QgsWkbTypes::multiType( type ) )
{
case QgsWkbTypes::MultiPoint:
{
geomCollection = new QgsMultiPoint();
break;
}
case QgsWkbTypes::MultiLineString:
{
geomCollection = new QgsMultiLineString();
break;
}
case QgsWkbTypes::MultiPolygon:
{
geomCollection = new QgsMultiPolygon();
break;
}
case QgsWkbTypes::MultiCurve:
{
geomCollection = new QgsMultiCurve();
break;
}
case QgsWkbTypes::MultiSurface:
{
geomCollection = new QgsMultiSurface();
break;
}
default:
break;
}
if ( !geomCollection )
{
error->setFixFailed( tr( "Unknown geometry type" ) );
}
else
{
geomCollection->addGeometry( geom->clone() );
feature.setGeometry( QgsGeometry( geomCollection ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
}
// Delete feature
else
{
featurePool->deleteFeature( feature.id() );
changes[error->layerId()][error->featureId()].append( Change( ChangeFeature, ChangeRemoved ) );
}
error->setFixed( method );
}
else if ( method == Delete )
{
featurePool->deleteFeature( feature.id() );
error->setFixed( method );
changes[error->layerId()][error->featureId()].append( Change( ChangeFeature, ChangeRemoved ) );
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
bool QgsGeometryGapCheck::mergeWithNeighbor( const QMap<QString, QgsFeaturePool *> &featurePools,
QgsGeometryGapCheckError *err,
Changes &changes, QString &errMsg ) const
{
double maxVal = 0.;
QString mergeLayerId;
QgsFeature mergeFeature;
int mergePartIdx = -1;
const QgsGeometry geometry = err->geometry();
const QgsAbstractGeometry *errGeometry = QgsGeometryCheckerUtils::getGeomPart( geometry.constGet(), 0 );
const auto layerIds = err->neighbors().keys();
// Search for touching neighboring geometries
for ( const QString &layerId : layerIds )
{
QgsFeaturePool *featurePool = featurePools.value( layerId );
std::unique_ptr<QgsAbstractGeometry> errLayerGeom( errGeometry->clone() );
QgsCoordinateTransform ct( featurePool->crs(), mContext->mapCrs, mContext->transformContext );
errLayerGeom->transform( ct, QgsCoordinateTransform::ReverseTransform );
const auto featureIds = err->neighbors().value( layerId );
for ( QgsFeatureId testId : featureIds )
{
QgsFeature testFeature;
if ( !featurePool->getFeature( testId, testFeature ) )
{
continue;
}
QgsGeometry featureGeom = testFeature.geometry();
const QgsAbstractGeometry *testGeom = featureGeom.constGet();
for ( int iPart = 0, nParts = testGeom->partCount(); iPart < nParts; ++iPart )
{
double len = QgsGeometryCheckerUtils::sharedEdgeLength( errLayerGeom.get(), QgsGeometryCheckerUtils::getGeomPart( testGeom, iPart ), mContext->reducedTolerance );
if ( len > maxVal )
{
maxVal = len;
mergeFeature = testFeature;
mergePartIdx = iPart;
mergeLayerId = layerId;
}
}
}
}
if ( maxVal == 0. )
{
return false;
}
// Merge geometries
QgsFeaturePool *featurePool = featurePools[ mergeLayerId ];
std::unique_ptr<QgsAbstractGeometry> errLayerGeom( errGeometry->clone() );
QgsCoordinateTransform ct( featurePool->crs(), mContext->mapCrs, mContext->transformContext );
errLayerGeom->transform( ct, QgsCoordinateTransform::ReverseTransform );
QgsGeometry mergeFeatureGeom = mergeFeature.geometry();
const QgsAbstractGeometry *mergeGeom = mergeFeatureGeom.constGet();
std::unique_ptr< QgsGeometryEngine > geomEngine = QgsGeometryCheckerUtils::createGeomEngine( errLayerGeom.get(), mContext->reducedTolerance );
std::unique_ptr<QgsAbstractGeometry> combinedGeom( geomEngine->combine( QgsGeometryCheckerUtils::getGeomPart( mergeGeom, mergePartIdx ), &errMsg ) );
if ( !combinedGeom || combinedGeom->isEmpty() || !QgsWkbTypes::isSingleType( combinedGeom->wkbType() ) )
{
return false;
}
// Add merged polygon to destination geometry
replaceFeatureGeometryPart( featurePools, mergeLayerId, mergeFeature, mergePartIdx, combinedGeom.release(), changes );
return true;
}
void QgsGeometrySelfIntersectionCheck::fixError( QgsGeometryCheckError *error, int method, const QMap<QString, int> & /*mergeAttributeIndices*/, Changes &changes ) const
{
QgsFeaturePool *featurePool = mContext->featurePools[ error->layerId() ];
QgsFeature feature;
if ( !featurePool->getFeature( error->featureId(), feature ) )
{
error->setObsolete();
return;
}
QgsGeometry featureGeom = feature.geometry();
QgsAbstractGeometry *geom = featureGeom.get();
QgsVertexId vidx = error->vidx();
// Check if ring still exists
if ( !vidx.isValid( geom ) )
{
error->setObsolete();
return;
}
const QgsGeometryUtils::SelfIntersection &inter = static_cast<QgsGeometrySelfIntersectionCheckError *>( error )->intersection();
// Check if error still applies
bool ringIsClosed = false;
int nVerts = QgsGeometryCheckerUtils::polyLineSize( geom, vidx.part, vidx.ring, &ringIsClosed );
if ( nVerts == 0 || inter.segment1 >= nVerts || inter.segment2 >= nVerts )
{
error->setObsolete();
return;
}
QgsPoint p1 = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, inter.segment1 ) );
QgsPoint q1 = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, inter.segment2 ) );
QgsPoint p2 = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, ( inter.segment1 + 1 ) % nVerts ) );
QgsPoint q2 = geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, ( inter.segment2 + 1 ) % nVerts ) );
QgsPoint s;
bool intersection = false;
if ( !QgsGeometryUtils::segmentIntersection( p1, p2, q1, q2, s, intersection, mContext->tolerance ) )
{
error->setObsolete();
return;
}
// Fix with selected method
if ( method == NoChange )
{
error->setFixed( method );
}
else if ( method == ToMultiObject || method == ToSingleObjects )
{
// Extract rings
QgsPointSequence ring1, ring2;
bool ring1EndsWithS = false;
bool ring2EndsWithS = false;
for ( int i = 0; i < nVerts; ++i )
{
if ( i <= inter.segment1 || i >= inter.segment2 + 1 )
{
ring1.append( geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, i ) ) );
ring1EndsWithS = false;
if ( i == inter.segment2 + 1 )
{
ring2.append( s );
ring2EndsWithS = true;
}
}
else
{
ring2.append( geom->vertexAt( QgsVertexId( vidx.part, vidx.ring, i ) ) );
ring2EndsWithS = true;
if ( i == inter.segment1 + 1 )
{
ring1.append( s );
ring1EndsWithS = false;
}
}
}
if ( nVerts == inter.segment2 + 1 )
{
ring2.append( s );
ring2EndsWithS = true;
}
if ( ringIsClosed || ring1EndsWithS )
ring1.append( ring1.front() ); // Ensure ring is closed
if ( ringIsClosed || ring2EndsWithS )
ring2.append( ring2.front() ); // Ensure ring is closed
if ( ring1.size() < 3 + ( ringIsClosed || ring1EndsWithS ) || ring2.size() < 3 + ( ringIsClosed || ring2EndsWithS ) )
{
error->setFixFailed( tr( "Resulting geometry is degenerate" ) );
return;
}
QgsLineString *ringGeom1 = new QgsLineString();
ringGeom1->setPoints( ring1 );
QgsLineString *ringGeom2 = new QgsLineString();
ringGeom2->setPoints( ring2 );
QgsAbstractGeometry *part = QgsGeometryCheckerUtils::getGeomPart( geom, vidx.part );
// If is a polygon...
if ( dynamic_cast<QgsCurvePolygon *>( part ) )
{
QgsCurvePolygon *poly = static_cast<QgsCurvePolygon *>( part );
// If self-intersecting ring is an interior ring, create separate holes
if ( vidx.ring > 0 )
{
poly->removeInteriorRing( vidx.ring );
poly->addInteriorRing( ringGeom1 );
poly->addInteriorRing( ringGeom2 );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeRemoved, vidx ) );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeAdded, QgsVertexId( vidx.part, poly->ringCount() - 2 ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeAdded, QgsVertexId( vidx.part, poly->ringCount() - 1 ) ) );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
}
else
{
// If ring is exterior, build two polygons, and reassign interiors as necessary
poly->setExteriorRing( ringGeom1 );
// If original feature was a linear polygon, also create the new part as a linear polygon
QgsCurvePolygon *poly2 = dynamic_cast<QgsPolygon *>( part ) ? new QgsPolygon() : new QgsCurvePolygon();
poly2->setExteriorRing( ringGeom2 );
// Reassing interiors as necessary
std::unique_ptr< QgsGeometryEngine > geomEnginePoly1 = QgsGeometryCheckerUtils::createGeomEngine( poly, mContext->tolerance );
std::unique_ptr< QgsGeometryEngine > geomEnginePoly2 = QgsGeometryCheckerUtils::createGeomEngine( poly2, mContext->tolerance );
for ( int n = poly->numInteriorRings(), i = n - 1; i >= 0; --i )
{
if ( !geomEnginePoly1->contains( poly->interiorRing( i ) ) )
{
if ( geomEnginePoly2->contains( poly->interiorRing( i ) ) )
{
poly2->addInteriorRing( static_cast<QgsCurve *>( poly->interiorRing( i )->clone() ) );
// No point in adding ChangeAdded changes, since the entire poly2 is added anyways later on
}
poly->removeInteriorRing( i );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeRemoved, QgsVertexId( vidx.part, 1 + i ) ) );
}
}
if ( method == ToMultiObject )
{
// If is already a geometry collection, just add the new polygon.
if ( dynamic_cast<QgsGeometryCollection *>( geom ) )
{
static_cast<QgsGeometryCollection *>( geom )->addGeometry( poly2 );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeChanged, QgsVertexId( vidx.part, vidx.ring ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geom->partCount() - 1 ) ) );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
}
// Otherwise, create multipolygon
else
{
QgsMultiPolygon *multiPoly = new QgsMultiPolygon();
multiPoly->addGeometry( poly->clone() );
multiPoly->addGeometry( poly2 );
feature.setGeometry( QgsGeometry( multiPoly ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
}
else // if ( method == ToSingleObjects )
{
QgsFeature newFeature;
newFeature.setAttributes( feature.attributes() );
newFeature.setGeometry( QgsGeometry( poly2 ) );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
featurePool->addFeature( newFeature );
changes[error->layerId()][feature.id()].append( Change( ChangeRing, ChangeChanged, QgsVertexId( vidx.part, vidx.ring ) ) );
changes[error->layerId()][newFeature.id()].append( Change( ChangeFeature, ChangeAdded ) );
}
}
}
else if ( dynamic_cast<QgsCurve *>( part ) )
{
if ( method == ToMultiObject )
{
if ( dynamic_cast<QgsGeometryCollection *>( geom ) )
{
QgsGeometryCollection *geomCollection = static_cast<QgsGeometryCollection *>( geom );
geomCollection->removeGeometry( vidx.part );
geomCollection->addGeometry( ringGeom1 );
geomCollection->addGeometry( ringGeom2 );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeRemoved, QgsVertexId( vidx.part ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geomCollection->partCount() - 2 ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geomCollection->partCount() - 1 ) ) );
}
else
{
QgsMultiCurve *geomCollection = new QgsMultiLineString();
geomCollection->addGeometry( ringGeom1 );
geomCollection->addGeometry( ringGeom2 );
feature.setGeometry( QgsGeometry( geomCollection ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged ) );
}
}
else // if(method == ToSingleObjects)
{
if ( dynamic_cast<QgsGeometryCollection *>( geom ) )
{
QgsGeometryCollection *geomCollection = static_cast<QgsGeometryCollection *>( geom );
geomCollection->removeGeometry( vidx.part );
geomCollection->addGeometry( ringGeom1 );
feature.setGeometry( featureGeom );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeRemoved, QgsVertexId( vidx.part ) ) );
changes[error->layerId()][feature.id()].append( Change( ChangePart, ChangeAdded, QgsVertexId( geomCollection->partCount() - 1 ) ) );
}
else
{
feature.setGeometry( QgsGeometry( ringGeom1 ) );
featurePool->updateFeature( feature );
changes[error->layerId()][feature.id()].append( Change( ChangeFeature, ChangeChanged, QgsVertexId( vidx.part ) ) );
}
QgsFeature newFeature;
newFeature.setAttributes( feature.attributes() );
newFeature.setGeometry( QgsGeometry( ringGeom2 ) );
featurePool->addFeature( newFeature );
changes[error->layerId()][newFeature.id()].append( Change( ChangeFeature, ChangeAdded ) );
}
}
else
{
delete ringGeom1;
delete ringGeom2;
}
error->setFixed( method );
}
else
{
error->setFixFailed( tr( "Unknown method" ) );
}
}
bool QgsGeometryChecker::fixError( QgsGeometryCheckError *error, int method, bool triggerRepaint )
{
mMessages.clear();
if ( error->status() >= QgsGeometryCheckError::StatusFixed )
{
return true;
}
#if 0
QTextStream( stdout ) << "Fixing " << error->description() << ": " << error->layerId() << ":" << error->featureId() << " @[" << error->vidx().part << ", " << error->vidx().ring << ", " << error->vidx().vertex << "](" << error->location().x() << ", " << error->location().y() << ") = " << error->value().toString() << endl;
#endif
QgsGeometryCheck::Changes changes;
QgsRectangle recheckArea = error->affectedAreaBBox();
error->check()->fixError( error, method, mMergeAttributeIndices, changes );
#if 0
QTextStream( stdout ) << " * Status: " << error->resolutionMessage() << endl;
static QVector<QString> strChangeWhat = { "ChangeFeature", "ChangePart", "ChangeRing", "ChangeNode" };
static QVector<QString> strChangeType = { "ChangeAdded", "ChangeRemoved", "ChangeChanged" };
for ( const QString &layerId : changes.keys() )
{
for ( const QgsFeatureId &fid : changes[layerId].keys() )
{
for ( const QgsGeometryCheck::Change &change : changes[layerId][fid] )
{
QTextStream( stdout ) << " * Change: " << layerId << ":" << fid << " :: " << strChangeWhat[change.what] << ":" << strChangeType[change.type] << ":(" << change.vidx.part << "," << change.vidx.ring << "," << change.vidx.vertex << ")" << endl;
}
}
}
#endif
emit errorUpdated( error, true );
if ( error->status() != QgsGeometryCheckError::StatusFixed )
{
return false;
}
// If nothing was changed, stop here
if ( changes.isEmpty() )
{
return true;
}
// Determine what to recheck
// - Collect all features which were changed, get affected area
QMap<QString, QSet<QgsFeatureId>> recheckFeatures;
for ( auto it = changes.constBegin(); it != changes.constEnd(); ++it )
{
const QMap<QgsFeatureId, QList<QgsGeometryCheck::Change>> &layerChanges = it.value();
QgsFeaturePool *featurePool = mContext->featurePools[it.key()];
QgsCoordinateTransform t( featurePool->getLayer()->crs(), mContext->mapCrs, QgsProject::instance() );
for ( auto layerChangeIt = layerChanges.constBegin(); layerChangeIt != layerChanges.constEnd(); ++layerChangeIt )
{
bool removed = false;
for ( const QgsGeometryCheck::Change &change : layerChangeIt.value() )
{
if ( change.what == QgsGeometryCheck::ChangeFeature && change.type == QgsGeometryCheck::ChangeRemoved )
{
removed = true;
break;
}
}
if ( !removed )
{
QgsFeature f;
if ( featurePool->get( layerChangeIt.key(), f ) )
{
recheckFeatures[it.key()].insert( layerChangeIt.key() );
recheckArea.combineExtentWith( t.transformBoundingBox( f.geometry().boundingBox() ) );
}
}
}
}
// - Determine extent to recheck for gaps
for ( QgsGeometryCheckError *err : qgis::as_const( mCheckErrors ) )
{
if ( err->check()->getCheckType() == QgsGeometryCheck::LayerCheck )
{
if ( err->affectedAreaBBox().intersects( recheckArea ) )
{
recheckArea.combineExtentWith( err->affectedAreaBBox() );
}
}
}
recheckArea.grow( 10 * mContext->tolerance );
QMap<QString, QgsFeatureIds> recheckAreaFeatures;
for ( const QString &layerId : mContext->featurePools.keys() )
{
QgsFeaturePool *featurePool = mContext->featurePools[layerId];
QgsCoordinateTransform t( mContext->mapCrs, featurePool->getLayer()->crs(), QgsProject::instance() );
recheckAreaFeatures[layerId] = featurePool->getIntersects( t.transform( recheckArea ) );
}
// Recheck feature / changed area to detect new errors
QList<QgsGeometryCheckError *> recheckErrors;
for ( const QgsGeometryCheck *check : qgis::as_const( mChecks ) )
{
if ( check->getCheckType() == QgsGeometryCheck::LayerCheck )
{
if ( !recheckAreaFeatures.isEmpty() )
{
check->collectErrors( recheckErrors, mMessages, nullptr, recheckAreaFeatures );
}
}
else
{
if ( !recheckFeatures.isEmpty() )
{
check->collectErrors( recheckErrors, mMessages, nullptr, recheckFeatures );
}
}
}
// Go through error list, update other errors of the checked feature
for ( QgsGeometryCheckError *err : qgis::as_const( mCheckErrors ) )
{
if ( err == error || err->status() == QgsGeometryCheckError::StatusObsolete )
{
continue;
}
QgsGeometryCheckError::Status oldStatus = err->status();
bool handled = err->handleChanges( changes );
// Check if this error now matches one found when rechecking the feature/area
QgsGeometryCheckError *matchErr = nullptr;
int nMatch = 0;
for ( QgsGeometryCheckError *recheckErr : qgis::as_const( recheckErrors ) )
{
if ( recheckErr->isEqual( err ) || recheckErr->closeMatch( err ) )
{
++nMatch;
matchErr = recheckErr;
}
}
// If just one close match was found, take it
if ( nMatch == 1 && matchErr )
{
err->update( matchErr );
emit errorUpdated( err, err->status() != oldStatus );
recheckErrors.removeAll( matchErr );
delete matchErr;
continue;
}
// If no match is found and the error is not fixed or obsolete, set it to obsolete if...
if ( err->status() < QgsGeometryCheckError::StatusFixed &&
(
// changes weren't handled
!handled ||
// or if it is a FeatureNodeCheck or FeatureCheck error whose feature was rechecked
( err->check()->getCheckType() <= QgsGeometryCheck::FeatureCheck && recheckFeatures[err->layerId()].contains( err->featureId() ) ) ||
// or if it is a LayerCheck error within the rechecked area
( err->check()->getCheckType() == QgsGeometryCheck::LayerCheck && recheckArea.contains( err->affectedAreaBBox() ) )
)
)
{
err->setObsolete();
emit errorUpdated( err, err->status() != oldStatus );
}
}
// Add new errors
for ( QgsGeometryCheckError *recheckErr : qgis::as_const( recheckErrors ) )
{
emit errorAdded( recheckErr );
mCheckErrors.append( recheckErr );
}
if ( triggerRepaint )
{
for ( const QString &layerId : changes.keys() )
{
mContext->featurePools[layerId]->getLayer()->triggerRepaint();
}
}
return true;
}
