//------------------------------sched_call-------------------------------------
uint Block::sched_call( Matcher &m, Block_Array &bbs, uint node_cnt, Node_List &worklist, int *ready_cnt, MachCallNode *mcall, VectorSet &next_call ) {
RegMask regs;
// Schedule all the users of the call right now. All the users are
// projection Nodes, so they must be scheduled next to the call.
// Collect all the defined registers.
for (DUIterator_Fast imax, i = mcall->fast_outs(imax); i < imax; i++) {
Node* n = mcall->fast_out(i);
assert( n->Opcode()==Op_MachProj, "" );
--ready_cnt[n->_idx];
assert( !ready_cnt[n->_idx], "" );
// Schedule next to call
_nodes.map(node_cnt++, n);
// Collect defined registers
regs.OR(n->out_RegMask());
// Check for scheduling the next control-definer
if( n->bottom_type() == Type::CONTROL )
// Warm up next pile of heuristic bits
needed_for_next_call(n, next_call, bbs);
// Children of projections are now all ready
for (DUIterator_Fast jmax, j = n->fast_outs(jmax); j < jmax; j++) {
Node* m = n->fast_out(j); // Get user
if( bbs[m->_idx] != this ) continue;
if( m->is_Phi() ) continue;
if( !--ready_cnt[m->_idx] )
worklist.push(m);
}
}
// Act as if the call defines the Frame Pointer.
// Certainly the FP is alive and well after the call.
regs.Insert(m.c_frame_pointer());
// Set all registers killed and not already defined by the call.
uint r_cnt = mcall->tf()->range()->cnt();
int op = mcall->ideal_Opcode();
MachProjNode *proj = new (1) MachProjNode( mcall, r_cnt+1, RegMask::Empty, MachProjNode::fat_proj );
bbs.map(proj->_idx,this);
_nodes.insert(node_cnt++, proj);
for( OptoReg::Name r = OptoReg::Name(0); r < _last_Mach_Reg; r=OptoReg::add(r,1) ) {
if( !regs.Member(r) ) { // Not already defined by the call
// Save-on-call register?
if( (m._register_save_policy[r] == 'C') ||
(m._register_save_policy[r] == 'A') ||
((m._register_save_policy[r] == 'E') &&
(op == Op_CallRuntime ||
op == Op_CallNative ||
op == Op_CallInterpreter ||
op == Op_CallLeaf)) ) {
proj->_rout.Insert(r);
}
}
}
return node_cnt;
}
//------------------------------add_call_kills-------------------------------------
// helper function that adds caller save registers to MachProjNode
static void add_call_kills(MachProjNode *proj, RegMask& regs, const char* save_policy, bool exclude_soe) {
// Fill in the kill mask for the call
for( OptoReg::Name r = OptoReg::Name(0); r < _last_Mach_Reg; r=OptoReg::add(r,1) ) {
if( !regs.Member(r) ) { // Not already defined by the call
// Save-on-call register?
if ((save_policy[r] == 'C') ||
(save_policy[r] == 'A') ||
((save_policy[r] == 'E') && exclude_soe)) {
proj->_rout.Insert(r);
}
}
}
}
//------------------------------sched_call-------------------------------------
uint Block::sched_call( Matcher &matcher, Block_Array &bbs, uint node_cnt, Node_List &worklist, int *ready_cnt, MachCallNode *mcall, VectorSet &next_call ) {
RegMask regs;
// Schedule all the users of the call right now. All the users are
// projection Nodes, so they must be scheduled next to the call.
// Collect all the defined registers.
for (DUIterator_Fast imax, i = mcall->fast_outs(imax); i < imax; i++) {
Node* n = mcall->fast_out(i);
assert( n->Opcode()==Op_MachProj, "" );
--ready_cnt[n->_idx];
assert( !ready_cnt[n->_idx], "" );
// Schedule next to call
_nodes.map(node_cnt++, n);
// Collect defined registers
regs.OR(n->out_RegMask());
// Check for scheduling the next control-definer
if( n->bottom_type() == Type::CONTROL )
// Warm up next pile of heuristic bits
needed_for_next_call(n, next_call, bbs);
// Children of projections are now all ready
for (DUIterator_Fast jmax, j = n->fast_outs(jmax); j < jmax; j++) {
Node* m = n->fast_out(j); // Get user
if( bbs[m->_idx] != this ) continue;
if( m->is_Phi() ) continue;
if( !--ready_cnt[m->_idx] )
worklist.push(m);
}
}
// Act as if the call defines the Frame Pointer.
// Certainly the FP is alive and well after the call.
regs.Insert(matcher.c_frame_pointer());
// Set all registers killed and not already defined by the call.
uint r_cnt = mcall->tf()->range()->cnt();
int op = mcall->ideal_Opcode();
MachProjNode *proj = new (matcher.C, 1) MachProjNode( mcall, r_cnt+1, RegMask::Empty, MachProjNode::fat_proj );
bbs.map(proj->_idx,this);
_nodes.insert(node_cnt++, proj);
// Select the right register save policy.
const char * save_policy;
switch (op) {
case Op_CallRuntime:
case Op_CallLeaf:
case Op_CallLeafNoFP:
// Calling C code so use C calling convention
save_policy = matcher._c_reg_save_policy;
break;
case Op_CallStaticJava:
case Op_CallDynamicJava:
// Calling Java code so use Java calling convention
save_policy = matcher._register_save_policy;
break;
default:
ShouldNotReachHere();
}
// When using CallRuntime mark SOE registers as killed by the call
// so values that could show up in the RegisterMap aren't live in a
// callee saved register since the register wouldn't know where to
// find them. CallLeaf and CallLeafNoFP are ok because they can't
// have debug info on them. Strictly speaking this only needs to be
// done for oops since idealreg2debugmask takes care of debug info
// references but there no way to handle oops differently than other
// pointers as far as the kill mask goes.
bool exclude_soe = op == Op_CallRuntime;
// If the call is a MethodHandle invoke, we need to exclude the
// register which is used to save the SP value over MH invokes from
// the mask. Otherwise this register could be used for
// deoptimization information.
if (op == Op_CallStaticJava) {
MachCallStaticJavaNode* mcallstaticjava = (MachCallStaticJavaNode*) mcall;
if (mcallstaticjava->_method_handle_invoke)
proj->_rout.OR(Matcher::method_handle_invoke_SP_save_mask());
}
// Fill in the kill mask for the call
for( OptoReg::Name r = OptoReg::Name(0); r < _last_Mach_Reg; r=OptoReg::add(r,1) ) {
if( !regs.Member(r) ) { // Not already defined by the call
// Save-on-call register?
if ((save_policy[r] == 'C') ||
(save_policy[r] == 'A') ||
((save_policy[r] == 'E') && exclude_soe)) {
proj->_rout.Insert(r);
}
}
}
return node_cnt;
}
