bool SCH_PRINTOUT::OnPrintPage( int page )
{
    SCH_SHEET_LIST sheetList( g_RootSheet );

    wxCHECK_MSG( page >= 1 && page <= (int)sheetList.size(), false,
                 wxT( "Cannot print invalid page number." ) );

    wxCHECK_MSG( sheetList[ page - 1].LastScreen() != NULL, false,
                 wxT( "Cannot print page with NULL screen." ) );

    wxString msg;
    msg.Printf( _( "Print page %d" ), page );
    m_parent->ClearMsgPanel();
    m_parent->AppendMsgPanel( msg, wxEmptyString, CYAN );

    SCH_SCREEN*     screen       = m_parent->GetScreen();
    SCH_SHEET_PATH  oldsheetpath = m_parent->GetCurrentSheet();
    m_parent->SetCurrentSheet( sheetList[ page - 1 ] );
    m_parent->GetCurrentSheet().UpdateAllScreenReferences();
    m_parent->SetSheetNumberAndCount();
    screen = m_parent->GetCurrentSheet().LastScreen();
    DrawPage( screen );
    m_parent->SetCurrentSheet( oldsheetpath );
    m_parent->GetCurrentSheet().UpdateAllScreenReferences();
    m_parent->SetSheetNumberAndCount();

    return true;
}
예제 #2
0
void DIALOG_PLOT_SCHEMATIC::CreateDXFFile( bool aPlotAll, bool aPlotFrameRef )
{
    SCH_EDIT_FRAME* schframe  = m_parent;
    SCH_SCREEN*     screen    = schframe->GetScreen();
    SCH_SHEET_PATH  oldsheetpath = schframe->GetCurrentSheet();

    /* When printing all pages, the printed page is not the current page.
     *  In complex hierarchies, we must setup references and others parameters
     * in the printed SCH_SCREEN
     *  because in complex hierarchies a SCH_SCREEN (a schematic drawings)
     *  is shared between many sheets
     */
    SCH_SHEET_LIST sheetList;

    if( aPlotAll )
        sheetList.BuildSheetList( g_RootSheet );
    else
        sheetList.push_back( schframe->GetCurrentSheet() );

    REPORTER& reporter = m_MessagesBox->Reporter();

    for( unsigned i = 0; i < sheetList.size();  i++ )
    {
        schframe->SetCurrentSheet( sheetList[i] );
        schframe->GetCurrentSheet().UpdateAllScreenReferences();
        schframe->SetSheetNumberAndCount();
        screen = schframe->GetCurrentSheet().LastScreen();

        wxPoint plot_offset;
        wxString msg;

        try
        {
            wxString fname = schframe->GetUniqueFilenameForCurrentSheet();
            wxString ext = DXF_PLOTTER::GetDefaultFileExtension();
            wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
                                                          ext, &reporter );

            if( PlotOneSheetDXF( plotFileName.GetFullPath(), screen, plot_offset, 1.0,
                                 aPlotFrameRef ) )
            {
                msg.Printf( _( "Plot: \"%s\" OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::RPT_ACTION );
            }
            else    // Error
            {
                msg.Printf( _( "Unable to create file \"%s\".\n" ),
                            GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::RPT_ERROR );
            }
        }
        catch( IO_ERROR& e )
        {
            msg.Printf( wxT( "DXF Plotter exception: %s"), GetChars( e.What() ) );
            reporter.Report( msg, REPORTER::RPT_ERROR );
            schframe->SetCurrentSheet( oldsheetpath );
            schframe->GetCurrentSheet().UpdateAllScreenReferences();
            schframe->SetSheetNumberAndCount();
            return;
        }
    }

    schframe->SetCurrentSheet( oldsheetpath );
    schframe->GetCurrentSheet().UpdateAllScreenReferences();
    schframe->SetSheetNumberAndCount();
}
예제 #3
0
void DIALOG_PLOT_SCHEMATIC::CreateDXFFile( bool aPlotAll, bool aPlotFrameRef )
{
    SCH_EDIT_FRAME* schframe  = (SCH_EDIT_FRAME*) m_parent;
    SCH_SCREEN*     screen    = schframe->GetScreen();
    SCH_SHEET_PATH* sheetpath;
    SCH_SHEET_PATH  oldsheetpath = schframe->GetCurrentSheet();

    /* When printing all pages, the printed page is not the current page.
     *  In complex hierarchies, we must setup references and others parameters
     * in the printed SCH_SCREEN
     *  because in complex hierarchies a SCH_SCREEN (a schematic drawings)
     *  is shared between many sheets
     */
    SCH_SHEET_LIST SheetList( NULL );

    sheetpath = SheetList.GetFirst();
    SCH_SHEET_PATH list;
    REPORTER& reporter = m_MessagesBox->Reporter();

    while( true )
    {
        if( aPlotAll )
        {
            if( sheetpath == NULL )
                break;

            list.Clear();

            if( list.BuildSheetPathInfoFromSheetPathValue( sheetpath->Path() ) )
            {
                schframe->SetCurrentSheet( list );
                schframe->GetCurrentSheet().UpdateAllScreenReferences();
                schframe->SetSheetNumberAndCount();
                screen = schframe->GetCurrentSheet().LastScreen();
            }
            else  // Should not happen
            {
                return;
            }

            sheetpath = SheetList.GetNext();
        }

        wxPoint plot_offset;
        wxString msg;

        try
        {
            wxString fname = schframe->GetUniqueFilenameForCurrentSheet();
            wxString ext = DXF_PLOTTER::GetDefaultFileExtension();
            wxFileName plotFileName = createPlotFileName( m_outputDirectoryName, fname,
                                                          ext, &reporter );

            if( PlotOneSheetDXF( plotFileName.GetFullPath(), screen, plot_offset, 1.0, aPlotFrameRef ) )
            {
                msg.Printf( _( "Plot: '%s' OK.\n" ), GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::ACTION );
            }
            else    // Error
            {
                msg.Printf( _( "Unable to create file '%s'.\n" ), GetChars( plotFileName.GetFullPath() ) );
                reporter.Report( msg, REPORTER::ERROR );
            }
        }
        catch( IO_ERROR& e )
        {
            msg.Printf( wxT( "DXF Plotter exception: %s"), GetChars( e.errorText ) );
            reporter.Report( msg, REPORTER::ERROR );
            schframe->SetCurrentSheet( oldsheetpath );
            schframe->GetCurrentSheet().UpdateAllScreenReferences();
            schframe->SetSheetNumberAndCount();
            return;
        }
        if( !aPlotAll )
        {
            break;
        }
    }

    schframe->SetCurrentSheet( oldsheetpath );
    schframe->GetCurrentSheet().UpdateAllScreenReferences();
    schframe->SetSheetNumberAndCount();
}
void DIALOG_PLOT_SCHEMATIC::CreateDXFFile( bool aPlotAll, bool aPlotFrameRef )
{
    SCH_EDIT_FRAME* schframe  = (SCH_EDIT_FRAME*) m_parent;
    SCH_SCREEN*     screen    = schframe->GetScreen();
    SCH_SHEET_PATH* sheetpath;
    SCH_SHEET_PATH  oldsheetpath = schframe->GetCurrentSheet();
    wxString        plotFileName;

    /* When printing all pages, the printed page is not the current page.
     *  In complex hierarchies, we must setup references and others parameters
     * in the printed SCH_SCREEN
     *  because in complex hierarchies a SCH_SCREEN (a schematic drawings)
     *  is shared between many sheets
     */
    SCH_SHEET_LIST SheetList( NULL );

    sheetpath = SheetList.GetFirst();
    SCH_SHEET_PATH list;

    while( true )
    {
        if( aPlotAll )
        {
            if( sheetpath == NULL )
                break;

            list.Clear();

            if( list.BuildSheetPathInfoFromSheetPathValue( sheetpath->Path() ) )
            {
                schframe->SetCurrentSheet( list );
                schframe->GetCurrentSheet().UpdateAllScreenReferences();
                schframe->SetSheetNumberAndCount();
                screen = schframe->GetCurrentSheet().LastScreen();
            }
            else  // Should not happen
            {
                return;
            }

            sheetpath = SheetList.GetNext();
        }

        wxPoint plot_offset;
        plotFileName = schframe->GetUniqueFilenameForCurrentSheet() + wxT(".")
                       + DXF_PLOTTER::GetDefaultFileExtension();

        wxString msg;

        if( PlotOneSheetDXF( plotFileName, screen, plot_offset, 1.0, aPlotFrameRef ) )
            msg.Printf( _( "Plot: <%s> OK\n" ), GetChars( plotFileName ) );
        else    // Error
            msg.Printf( _( "Unable to create <%s>\n" ), GetChars( plotFileName ) );

        m_MessagesBox->AppendText( msg );


        if( !aPlotAll )
            break;
    }

    schframe->SetCurrentSheet( oldsheetpath );
    schframe->GetCurrentSheet().UpdateAllScreenReferences();
    schframe->SetSheetNumberAndCount();
}