int main()
#endif
{
CGAL::Timer total_timer;
total_timer.start();
std::cerr << "PARAMETERIZATION" << std::endl;
//***************************************
// Read options on the command line
//***************************************
std::string type; // default: Floater param
std::string border; // default: circular border param.
std::string solver; // default: OpenNL solver
std::string input; // required
std::string output; // default: out.eps
try
{
#ifdef CGAL_USE_BOOST_PROGRAM_OPTIONS
po::options_description desc("Allowed options");
desc.add_options()
("help,h", "prints this help message")
("type,t", po::value<std::string>(&type)->default_value("floater"),
"parameterization method: floater, conformal, barycentric, authalic or lscm")
("border,b", po::value<std::string>(&border)->default_value("circle"),
"border shape: circle, square or 2pts (lscm only)")
("solver,s", po::value<std::string>(&solver)->default_value("opennl"),
"solver: opennl")
("input,i", po::value<std::string>(&input)->default_value(""),
"input mesh (OFF)")
("output,o", po::value<std::string>(&output)->default_value("out.eps"),
"output file (EPS or OBJ)")
;
po::positional_options_description p;
p.add("input", 1);
p.add("output", 1);
po::variables_map vm;
po::store(po::command_line_parser(argc, argv).options(desc).positional(p).run(), vm);
po::notify(vm);
if (vm.count("help")) {
std::cout << desc << "\n";
return 1;
}
#else
std::cerr << "Command-line options require Boost.ProgramOptions" << std::endl;
std::cerr << "Use hard-coded options" << std::endl;
border = "square";
type = "floater";
solver = "opennl";
input = "data/rotor.off";
output = "rotor_floater_square_opennl_parameterized.obj";
#endif
}
catch(std::exception& e) {
std::cerr << "error: " << e.what() << "\n";
return 1;
}
catch(...) {
std::cerr << "Exception of unknown type!\n";
throw;
}
//***************************************
// Read the mesh
//***************************************
CGAL::Timer task_timer;
task_timer.start();
// Read the mesh
std::ifstream stream(input.c_str());
Polyhedron mesh;
stream >> mesh;
if(!stream || !mesh.is_valid() || mesh.empty())
{
std::cerr << "Error: cannot read OFF file " << input << std::endl;
return EXIT_FAILURE;
}
std::cerr << "Read file " << input << ": "
<< task_timer.time() << " seconds "
<< "(" << mesh.size_of_facets() << " facets, "
<< mesh.size_of_vertices() << " vertices)" << std::endl;
task_timer.reset();
//***************************************
// Create mesh adaptor
//***************************************
// The Surface_mesh_parameterization package needs an adaptor to handle Polyhedron_ex meshes
Parameterization_polyhedron_adaptor mesh_adaptor(mesh);
// The parameterization methods support only meshes that
// are topological disks => we need to compute a cutting path
// that makes the mesh a "virtual" topological disk
//
// 1) Cut the mesh
Seam seam = cut_mesh(mesh_adaptor);
if (seam.empty())
{
std::cerr << "Input mesh not supported: the example cutting algorithm is too simple to cut this shape" << std::endl;
return EXIT_FAILURE;
}
//
// 2) Create adaptor that virtually "cuts" a patch in a Polyhedron_ex mesh
Mesh_patch_polyhedron mesh_patch(mesh_adaptor, seam.begin(), seam.end());
if (!mesh_patch.is_valid())
{
std::cerr << "Input mesh not supported: non manifold shape or invalid cutting" << std::endl;
return EXIT_FAILURE;
}
std::cerr << "Mesh cutting: " << task_timer.time() << " seconds." << std::endl;
task_timer.reset();
//***************************************
// switch parameterization
//***************************************
std::cerr << "Parameterization..." << std::endl;
// Defines the error codes
typedef CGAL::Parameterizer_traits_3<Mesh_patch_polyhedron> Parameterizer;
Parameterizer::Error_code err;
if (solver == std::string("opennl"))
{
err = parameterize<Mesh_patch_polyhedron,
OpenNL::DefaultLinearSolverTraits<double>,
OpenNL::SymmetricLinearSolverTraits<double>
>(mesh_patch, type, border);
}
else
{
std::cerr << "Error: invalid solver parameter " << solver << std::endl;
err = Parameterizer::ERROR_WRONG_PARAMETER;
}
// Report errors
switch(err) {
case Parameterizer::OK: // Success
break;
case Parameterizer::ERROR_EMPTY_MESH: // Input mesh not supported
case Parameterizer::ERROR_NON_TRIANGULAR_MESH:
case Parameterizer::ERROR_NO_TOPOLOGICAL_DISC:
case Parameterizer::ERROR_BORDER_TOO_SHORT:
std::cerr << "Input mesh not supported: " << Parameterizer::get_error_message(err) << std::endl;
return EXIT_FAILURE;
break;
default: // Error
std::cerr << "Error: " << Parameterizer::get_error_message(err) << std::endl;
return EXIT_FAILURE;
break;
};
std::cerr << "Parameterization: " << task_timer.time() << " seconds." << std::endl;
task_timer.reset();
//***************************************
// Output
//***************************************
// get output file's extension
std::string extension = output.substr(output.find_last_of('.'));
// Save mesh
if (extension == ".eps" || extension == ".EPS")
{
// write Postscript file
if ( ! mesh.write_file_eps(output.c_str()) )
{
std::cerr << "Error: cannot write file " << output << std::endl;
return EXIT_FAILURE;
}
}
else if (extension == ".obj" || extension == ".OBJ")
{
// write Wavefront obj file
if ( ! mesh.write_file_obj(output.c_str()) )
{
std::cerr << "Error: cannot write file " << output << std::endl;
return EXIT_FAILURE;
}
}
else
{
std::cerr << "Error: output format not supported" << output << std::endl;
err = Parameterizer::ERROR_WRONG_PARAMETER;
return EXIT_FAILURE;
}
std::cerr << "Write file " << output << ": "
<< task_timer.time() << " seconds " << std::endl;
return EXIT_SUCCESS;
}
// ----------------------------------------------------------------------------
// main()
// ----------------------------------------------------------------------------
int main(int argc, char * argv[])
{
std::cerr << "PARAMETERIZATION" << std::endl;
std::cerr << " Discrete Authalic Parameterization" << std::endl;
std::cerr << " Circular arclength border" << std::endl;
std::cerr << " Eigen solver" << std::endl;
std::cerr << " Very simple cut if model is not a topological disk" << std::endl;
std::cerr << " Output: EPS" << std::endl;
//***************************************
// decode parameters
//***************************************
if (argc-1 != 2)
{
std::cerr << "Usage: " << argv[0] << " input_file.off output_file.eps" << std::endl;
return(EXIT_FAILURE);
}
// File names are:
const char* input_filename = argv[1];
const char* output_filename = argv[2];
//***************************************
// Read the mesh
//***************************************
// Read the mesh
std::ifstream stream(input_filename);
Polyhedron mesh;
stream >> mesh;
if(!stream || !mesh.is_valid() || mesh.empty())
{
std::cerr << "Error: cannot read OFF file " << input_filename << std::endl;
return EXIT_FAILURE;
}
//***************************************
// Create Polyhedron adaptor
//***************************************
Parameterization_polyhedron_adaptor mesh_adaptor(mesh);
//***************************************
// Virtually cut mesh
//***************************************
// The parameterization methods support only meshes that
// are topological disks => we need to compute a "cutting" of the mesh
// that makes it homeomorphic to a disk
Seam seam = cut_mesh(mesh_adaptor);
if (seam.empty())
{
std::cerr << "Input mesh not supported: the example cutting algorithm is too simple to cut this shape" << std::endl;
return EXIT_FAILURE;
}
// Create a second adaptor that virtually "cuts" the mesh following the 'seam' path
typedef CGAL::Parameterization_mesh_patch_3<Parameterization_polyhedron_adaptor>
Mesh_patch_polyhedron;
Mesh_patch_polyhedron mesh_patch(mesh_adaptor, seam.begin(), seam.end());
if (!mesh_patch.is_valid())
{
std::cerr << "Input mesh not supported: non manifold shape or invalid cutting" << std::endl;
return EXIT_FAILURE;
}
//***************************************
// Discrete Authalic Parameterization (square border)
// with Eigen solver
//***************************************
// Border parameterizer
typedef CGAL::Circular_border_arc_length_parameterizer_3<Mesh_patch_polyhedron>
Border_parameterizer;
// Discrete Authalic Parameterization (square border)
// with Eigen solver
typedef CGAL::Discrete_authalic_parameterizer_3<Mesh_patch_polyhedron,
Border_parameterizer> Parameterizer;
Parameterizer::Error_code err = CGAL::parameterize(mesh_patch, Parameterizer());
switch(err) {
case Parameterizer::OK: // Success
break;
case Parameterizer::ERROR_EMPTY_MESH: // Input mesh not supported
case Parameterizer::ERROR_NON_TRIANGULAR_MESH:
case Parameterizer::ERROR_NO_TOPOLOGICAL_DISC:
case Parameterizer::ERROR_BORDER_TOO_SHORT:
std::cerr << "Input mesh not supported: " << Parameterizer::get_error_message(err) << std::endl;
return EXIT_FAILURE;
break;
default: // Error
std::cerr << "Error: " << Parameterizer::get_error_message(err) << std::endl;
return EXIT_FAILURE;
break;
};
//***************************************
// Output
//***************************************
// Write Postscript file
if ( ! write_file_eps(mesh_adaptor, output_filename) )
{
std::cerr << "Error: cannot write file " << output_filename << std::endl;
return EXIT_FAILURE;
}
return EXIT_SUCCESS;
}
int main(int argc, char * argv[])
{
std::cerr << "PARAMETERIZATION" << std::endl;
std::cerr << " Floater parameterization" << std::endl;
std::cerr << " Circle border" << std::endl;
std::cerr << " OpenNL solver" << std::endl;
std::cerr << " Very simple cut if model is not a topological disk" << std::endl;
//***************************************
// decode parameters
//***************************************
if (argc-1 != 1)
{
std::cerr << "Usage: " << argv[0] << " input_file.off" << std::endl;
return(EXIT_FAILURE);
}
// File name is:
const char* input_filename = argv[1];
//***************************************
// Read the mesh
//***************************************
// Read the mesh
std::ifstream stream(input_filename);
Polyhedron mesh;
stream >> mesh;
if(!stream || !mesh.is_valid() || mesh.empty())
{
std::cerr << "Error: cannot read OFF file " << input_filename << std::endl;
return EXIT_FAILURE;
}
//***************************************
// Create Polyhedron adaptor
//***************************************
Parameterization_polyhedron_adaptor mesh_adaptor(mesh);
//***************************************
// Virtually cut mesh
//***************************************
// The parameterization methods support only meshes that
// are topological disks => we need to compute a "cutting" of the mesh
// that makes it homeomorphic to a disk
Seam seam = cut_mesh(mesh_adaptor);
if (seam.empty())
{
std::cerr << "Input mesh not supported: the example cutting algorithm is too simple to cut this shape" << std::endl;
return EXIT_FAILURE;
}
// Create a second adaptor that virtually "cuts" the mesh following the 'seam' path
typedef CGAL::Parameterization_mesh_patch_3<Parameterization_polyhedron_adaptor>
Mesh_patch_polyhedron;
Mesh_patch_polyhedron mesh_patch(mesh_adaptor, seam.begin(), seam.end());
if (!mesh_patch.is_valid())
{
std::cerr << "Input mesh not supported: non manifold shape or invalid cutting" << std::endl;
return EXIT_FAILURE;
}
//***************************************
// Floater Mean Value Coordinates parameterization
//***************************************
typedef CGAL::Parameterizer_traits_3<Mesh_patch_polyhedron>
Parameterizer; // Type that defines the error codes
Parameterizer::Error_code err = CGAL::parameterize(mesh_patch);
switch(err) {
case Parameterizer::OK: // Success
break;
case Parameterizer::ERROR_EMPTY_MESH: // Input mesh not supported
case Parameterizer::ERROR_NON_TRIANGULAR_MESH:
case Parameterizer::ERROR_NO_TOPOLOGICAL_DISC:
case Parameterizer::ERROR_BORDER_TOO_SHORT:
std::cerr << "Input mesh not supported: " << Parameterizer::get_error_message(err) << std::endl;
return EXIT_FAILURE;
break;
default: // Error
std::cerr << "Error: " << Parameterizer::get_error_message(err) << std::endl;
return EXIT_FAILURE;
break;
};
//***************************************
// Output
//***************************************
// Raw output: dump (u,v) pairs
Polyhedron::Vertex_const_iterator pVertex;
for (pVertex = mesh.vertices_begin();
pVertex != mesh.vertices_end();
pVertex++)
{
// (u,v) pair is stored in any halfedge
double u = mesh_adaptor.info(pVertex->halfedge())->uv().x();
double v = mesh_adaptor.info(pVertex->halfedge())->uv().y();
std::cout << "(u,v) = (" << u << "," << v << ")" << std::endl;
}
return EXIT_SUCCESS;
}