예제 #1
0
void CSMSettings::UserSettings::buildSettingModelDefaults()
{
    QString section;

    declareSection ("3d-render", "3D Rendering");
    {
        Setting *shaders = createSetting (Type_CheckBox, "shaders", "Enable Shaders");
        shaders->setDefaultValue ("true");

        Setting *farClipDist = createSetting (Type_DoubleSpinBox, "far-clip-distance", "Far clipping distance");
        farClipDist->setDefaultValue (300000);
        farClipDist->setRange (0, 1000000);
        farClipDist->setToolTip ("The maximum distance objects are still rendered at.");

        QString defaultValue = "None";
        Setting *antialiasing = createSetting (Type_ComboBox, "antialiasing", "Antialiasing");
        antialiasing->setDeclaredValues (QStringList()
            << defaultValue << "MSAA 2" << "MSAA 4" << "MSAA 8" << "MSAA 16");
        antialiasing->setDefaultValue (defaultValue);
    }

    declareSection ("3d-render-adv", "3D Rendering (Advanced)");
    {
        Setting *numLights = createSetting (Type_SpinBox, "num_lights",
            "Number of lights per pass");
        numLights->setDefaultValue (8);
        numLights->setRange (1, 100);
    }

    declareSection ("scene-input", "Scene Input");
    {
        Setting *timer = createSetting (Type_SpinBox, "timer", "Input responsiveness");
        timer->setDefaultValue (20);
        timer->setRange (1, 100);
        timer->setToolTip ("The time between two checks for user input in milliseconds.<p>"
            "Lower value result in higher responsiveness.");

        Setting *fastFactor = createSetting (Type_SpinBox, "fast-factor",
            "Fast movement factor");
        fastFactor->setDefaultValue (4);
        fastFactor->setRange (1, 100);
        fastFactor->setToolTip (
            "Factor by which movement is speed up while the shift key is held down.");
    }

    declareSection ("window", "Window");
    {
        Setting *preDefined = createSetting (Type_ComboBox, "pre-defined",
            "Default window size");
        preDefined->setEditorSetting (false);
        preDefined->setDeclaredValues (
            QStringList() << "640 x 480" << "800 x 600" << "1024 x 768" << "1440 x 900");
        preDefined->setViewLocation (1, 1);
        preDefined->setColumnSpan (2);
        preDefined->setToolTip ("Newly opened top-level windows will open with this size "
            "(picked from a list of pre-defined values)");

        Setting *width = createSetting (Type_LineEdit, "default-width",
            "Default window width");
        width->setDefaultValues (QStringList() << "1024");
        width->setViewLocation (2, 1);
        width->setColumnSpan (1);
        width->setToolTip ("Newly opened top-level windows will open with this width.");
        preDefined->addProxy (width, QStringList() << "640" << "800" << "1024" << "1440");

        Setting *height = createSetting (Type_LineEdit, "default-height",
            "Default window height");
        height->setDefaultValues (QStringList() << "768");
        height->setViewLocation (2, 2);
        height->setColumnSpan (1);
        height->setToolTip ("Newly opened top-level windows will open with this height.");
        preDefined->addProxy (height, QStringList() << "480" << "600" << "768" << "900");

        Setting *reuse = createSetting (Type_CheckBox, "reuse", "Reuse Subviews");
        reuse->setDefaultValue ("true");
        reuse->setToolTip ("When a new subview is requested and a matching subview already "
            " exist, do not open a new subview and use the existing one instead.");

        Setting *statusBar = createSetting (Type_CheckBox, "show-statusbar", "Show Status Bar");
        statusBar->setDefaultValue ("true");
        statusBar->setToolTip ("If a newly open top level window is showing status bars or not. "
            " Note that this does not affect existing windows.");

        Setting *maxSubView = createSetting (Type_SpinBox, "max-subviews",
            "Maximum number of subviews per top-level window");
        maxSubView->setDefaultValue (256);
        maxSubView->setRange (1, 256);
        maxSubView->setToolTip ("If the maximum number is reached and a new subview is opened "
            "it will be placed into a new top-level window.");

        Setting *hide = createSetting (Type_CheckBox, "hide-subview", "Hide single subview");
        hide->setDefaultValue ("false");
        hide->setToolTip ("When a view contains only a single subview, hide the subview title "
            "bar and if this subview is closed also close the view (unless it is the last "
            "view for this document)");

        Setting *minWidth = createSetting (Type_SpinBox, "minimum-width",
            "Minimum subview width");
        minWidth->setDefaultValue (325);
        minWidth->setRange (50, 10000);
        minWidth->setToolTip ("Minimum width of subviews.");
    }

    declareSection ("records", "Records");
    {
        QString defaultValue = "Icon and Text";
        QStringList values = QStringList() << defaultValue << "Icon Only" << "Text Only";

        Setting *rsd = createSetting (Type_RadioButton, "status-format",
            "Modification status display format");
        rsd->setDefaultValue (defaultValue);
        rsd->setDeclaredValues (values);

        Setting *ritd = createSetting (Type_RadioButton, "type-format",
            "ID type display format");
        ritd->setDefaultValue (defaultValue);
        ritd->setDeclaredValues (values);
    }

    declareSection ("table-input", "Table Input");
    {
        QString inPlaceEdit ("Edit in Place");
        QString editRecord ("Edit Record");
        QString view ("View");
        QString editRecordAndClose ("Edit Record and Close");

        QStringList values;
        values
            << "None" << inPlaceEdit << editRecord << view << "Revert" << "Delete"
            << editRecordAndClose << "View and Close";

        QString toolTip = "<ul>"
            "<li>None</li>"
            "<li>Edit in Place: Edit the clicked cell</li>"
            "<li>Edit Record: Open a dialogue subview for the clicked record</li>"
            "<li>View: Open a scene subview for the clicked record (not available everywhere)</li>"
            "<li>Revert: Revert record</li>"
            "<li>Delete: Delete recordy</li>"
            "<li>Edit Record and Close: Open a dialogue subview for the clicked record and close the table subview</li>"
            "<li>View And Close: Open a scene subview for the clicked record and close the table subview</li>"
            "</ul>";

        Setting *doubleClick = createSetting (Type_ComboBox, "double", "Double Click");
        doubleClick->setDeclaredValues (values);
        doubleClick->setDefaultValue (inPlaceEdit);
        doubleClick->setToolTip ("Action on double click in table:<p>" + toolTip);

        Setting *shiftDoubleClick = createSetting (Type_ComboBox, "double-s",
            "Shift Double Click");
        shiftDoubleClick->setDeclaredValues (values);
        shiftDoubleClick->setDefaultValue (editRecord);
        shiftDoubleClick->setToolTip ("Action on shift double click in table:<p>" + toolTip);

        Setting *ctrlDoubleClick = createSetting (Type_ComboBox, "double-c",
            "Control Double Click");
        ctrlDoubleClick->setDeclaredValues (values);
        ctrlDoubleClick->setDefaultValue (view);
        ctrlDoubleClick->setToolTip ("Action on control double click in table:<p>" + toolTip);

        Setting *shiftCtrlDoubleClick = createSetting (Type_ComboBox, "double-sc",
            "Shift Control Double Click");
        shiftCtrlDoubleClick->setDeclaredValues (values);
        shiftCtrlDoubleClick->setDefaultValue (editRecordAndClose);
        shiftCtrlDoubleClick->setToolTip ("Action on shift control double click in table:<p>" + toolTip);
    }

    {
        /******************************************************************
        * There are three types of values:
        *
        * Declared values
        *
        *       Pre-determined values, typically for
        *       combobox drop downs and boolean (radiobutton / checkbox) labels.
        *       These values represent the total possible list of values that
        *       may define a setting.  No other values are allowed.
        *
        * Defined values
        *
        *       Values which represent the actual, current value of
        *       a setting.  For settings with declared values, this must be one
        *       or several declared values, as appropriate.
        *
        * Proxy values
        *       Values the proxy master updates the proxy slave when
        *       it's own definition is set / changed.  These are definitions for
        *       proxy slave settings, but must match any declared values the
        *       proxy slave has, if any.
        *******************************************************************/
/*
        //create setting objects, specifying the basic widget type,
        //the page name, and the view name

        Setting *masterBoolean = createSetting (Type_RadioButton, section,
                                                "Master Proxy");

        Setting *slaveBoolean = createSetting (Type_CheckBox, section,
                                                "Proxy Checkboxes");

        Setting *slaveSingleText = createSetting (Type_LineEdit, section,
                                                "Proxy TextBox 1");

        Setting *slaveMultiText = createSetting (Type_LineEdit, section,
                                                "ProxyTextBox 2");

        Setting *slaveAlphaSpinbox = createSetting (Type_SpinBox, section,
                                                "Alpha Spinbox");

        Setting *slaveIntegerSpinbox = createSetting (Type_SpinBox, section,
                                                "Int Spinbox");

        Setting *slaveDoubleSpinbox = createSetting (Type_DoubleSpinBox,
                                                section, "Double Spinbox");

        Setting *slaveSlider = createSetting (Type_Slider, section, "Slider");

        Setting *slaveDial = createSetting (Type_Dial, section, "Dial");

        //set declared values for selected views
        masterBoolean->setDeclaredValues (QStringList()
                                        << "Profile One" << "Profile Two"
                                        << "Profile Three" << "Profile Four");

        slaveBoolean->setDeclaredValues (QStringList()
                            << "One" << "Two" << "Three" << "Four" << "Five");

        slaveAlphaSpinbox->setDeclaredValues (QStringList()
                            << "One" << "Two" << "Three" << "Four");


        masterBoolean->addProxy (slaveBoolean, QList <QStringList>()
                                 << (QStringList() << "One" << "Three")
                                 << (QStringList() << "One" << "Three")
                                 << (QStringList() << "One" << "Three" << "Five")
                                 << (QStringList() << "Two" << "Four")
                                 );

        masterBoolean->addProxy (slaveSingleText, QList <QStringList>()
                                 << (QStringList() << "Text A")
                                 << (QStringList() << "Text B")
                                 << (QStringList() << "Text A")
                                 << (QStringList() << "Text C")
                                 );

        masterBoolean->addProxy (slaveMultiText, QList <QStringList>()
                                 << (QStringList() << "One" << "Three")
                                 << (QStringList() << "One" << "Three")
                                 << (QStringList() << "One" << "Three" << "Five")
                                 << (QStringList() << "Two" << "Four")
                                 );

        masterBoolean->addProxy (slaveAlphaSpinbox, QList <QStringList>()
                                 << (QStringList() << "Four")
                                 << (QStringList() << "Three")
                                 << (QStringList() << "Two")
                                 << (QStringList() << "One"));

        masterBoolean->addProxy (slaveIntegerSpinbox, QList <QStringList> ()
                                 << (QStringList() << "0")
                                 << (QStringList() << "7")
                                 << (QStringList() << "14")
                                 << (QStringList() << "21"));

        masterBoolean->addProxy (slaveDoubleSpinbox, QList <QStringList> ()
                                 << (QStringList() << "0.17")
                                 << (QStringList() << "0.34")
                                 << (QStringList() << "0.51")
                                 << (QStringList() << "0.68"));

        masterBoolean->addProxy (slaveSlider, QList <QStringList> ()
                                 << (QStringList() << "25")
                                 << (QStringList() << "50")
                                 << (QStringList() << "75")
                                 << (QStringList() << "100")
                                 );

        masterBoolean->addProxy (slaveDial, QList <QStringList> ()
                                 << (QStringList() << "25")
                                 << (QStringList() << "50")
                                 << (QStringList() << "75")
                                 << (QStringList() << "100")
                                 );

        //settings with proxies are not serialized by default
        //other settings non-serialized for demo purposes
        slaveBoolean->setSerializable (false);
        slaveSingleText->setSerializable (false);
        slaveMultiText->setSerializable (false);
        slaveAlphaSpinbox->setSerializable (false);
        slaveIntegerSpinbox->setSerializable (false);
        slaveDoubleSpinbox->setSerializable (false);
        slaveSlider->setSerializable (false);
        slaveDial->setSerializable (false);

        slaveBoolean->setDefaultValues (QStringList()
                                        << "One" << "Three" << "Five");

        slaveSingleText->setDefaultValue ("Text A");

        slaveMultiText->setDefaultValues (QStringList()
                                         << "One" << "Three" << "Five");

        slaveSingleText->setWidgetWidth (24);
        slaveMultiText->setWidgetWidth (24);

        slaveAlphaSpinbox->setDefaultValue ("Two");
        slaveAlphaSpinbox->setWidgetWidth (20);
        //slaveAlphaSpinbox->setPrefix ("No. ");
        //slaveAlphaSpinbox->setSuffix ("!");
        slaveAlphaSpinbox->setWrapping (true);

        slaveIntegerSpinbox->setDefaultValue (14);
        slaveIntegerSpinbox->setMinimum (0);
        slaveIntegerSpinbox->setMaximum (58);
        slaveIntegerSpinbox->setPrefix ("$");
        slaveIntegerSpinbox->setSuffix (".00");
        slaveIntegerSpinbox->setWidgetWidth (10);
        slaveIntegerSpinbox->setSpecialValueText ("Nothing!");

        slaveDoubleSpinbox->setDefaultValue (0.51);
        slaveDoubleSpinbox->setSingleStep(0.17);
        slaveDoubleSpinbox->setMaximum(4.0);

        slaveSlider->setMinimum (0);
        slaveSlider->setMaximum (100);
        slaveSlider->setDefaultValue (75);
        slaveSlider->setWidgetWidth (100);
        slaveSlider->setTicksAbove (true);
        slaveSlider->setTickInterval (25);

        slaveDial->setMinimum (0);
        slaveDial->setMaximum (100);
        slaveDial->setSingleStep (5);
        slaveDial->setDefaultValue (75);
        slaveDial->setTickInterval (25);
*/
        }
}
예제 #2
0
void CSMSettings::UserSettings::buildSettingModelDefaults()
{
    /*
    declareSection ("3d-render", "3D Rendering");
    {
        Setting *farClipDist = createSetting (Type_DoubleSpinBox, "far-clip-distance", "Far clipping distance");
        farClipDist->setDefaultValue (300000);
        farClipDist->setRange (0, 1000000);
        farClipDist->setToolTip ("The maximum distance objects are still rendered at.");

        QString defaultValue = "None";
        Setting *antialiasing = createSetting (Type_ComboBox, "antialiasing", "Antialiasing");
        antialiasing->setDeclaredValues (QStringList()
            << defaultValue << "MSAA 2" << "MSAA 4" << "MSAA 8" << "MSAA 16");
        antialiasing->setDefaultValue (defaultValue);
    }
    */

    /*
    declareSection ("scene-input", "Scene Input");
    {
        Setting *fastFactor = createSetting (Type_SpinBox, "fast-factor",
            "Fast movement factor");
        fastFactor->setDefaultValue (4);
        fastFactor->setRange (1, 100);
        fastFactor->setToolTip (
            "Factor by which movement is speed up while the shift key is held down.");
    }
    */

    declareSection ("window", "Window");
    {
        Setting *preDefined = createSetting (Type_ComboBox, "pre-defined",
            "Default window size");
        preDefined->setEditorSetting (false);
        preDefined->setDeclaredValues (
            QStringList() << "640 x 480" << "800 x 600" << "1024 x 768" << "1440 x 900");
        preDefined->setViewLocation (1, 1);
        preDefined->setColumnSpan (2);
        preDefined->setToolTip ("Newly opened top-level windows will open with this size "
            "(picked from a list of pre-defined values)");

        Setting *width = createSetting (Type_LineEdit, "default-width",
            "Default window width");
        width->setDefaultValues (QStringList() << "1024");
        width->setViewLocation (2, 1);
        width->setColumnSpan (1);
        width->setToolTip ("Newly opened top-level windows will open with this width.");
        preDefined->addProxy (width, QStringList() << "640" << "800" << "1024" << "1440");

        Setting *height = createSetting (Type_LineEdit, "default-height",
            "Default window height");
        height->setDefaultValues (QStringList() << "768");
        height->setViewLocation (2, 2);
        height->setColumnSpan (1);
        height->setToolTip ("Newly opened top-level windows will open with this height.");
        preDefined->addProxy (height, QStringList() << "480" << "600" << "768" << "900");

        Setting *reuse = createSetting (Type_CheckBox, "reuse", "Reuse Subviews");
        reuse->setDefaultValue ("true");
        reuse->setToolTip ("When a new subview is requested and a matching subview already "
            " exist, do not open a new subview and use the existing one instead.");

        Setting *statusBar = createSetting (Type_CheckBox, "show-statusbar", "Show Status Bar");
        statusBar->setDefaultValue ("true");
        statusBar->setToolTip ("If a newly open top level window is showing status bars or not. "
            " Note that this does not affect existing windows.");

        Setting *maxSubView = createSetting (Type_SpinBox, "max-subviews",
            "Maximum number of subviews per top-level window");
        maxSubView->setDefaultValue (256);
        maxSubView->setRange (1, 256);
        maxSubView->setToolTip ("If the maximum number is reached and a new subview is opened "
            "it will be placed into a new top-level window.");

        Setting *hide = createSetting (Type_CheckBox, "hide-subview", "Hide single subview");
        hide->setDefaultValue ("false");
        hide->setToolTip ("When a view contains only a single subview, hide the subview title "
            "bar and if this subview is closed also close the view (unless it is the last "
            "view for this document)");

        Setting *minWidth = createSetting (Type_SpinBox, "minimum-width",
            "Minimum subview width");
        minWidth->setDefaultValue (325);
        minWidth->setRange (50, 10000);
        minWidth->setToolTip ("Minimum width of subviews.");

        QString defaultScroll = "Scrollbar Only";
        QStringList scrollValues = QStringList() << defaultScroll << "Grow Only" << "Grow then Scroll";

        Setting *mainwinScroll = createSetting (Type_RadioButton, "mainwindow-scrollbar",
            "Add a horizontal scrollbar to the main view window.");
        mainwinScroll->setDefaultValue (defaultScroll);
        mainwinScroll->setDeclaredValues (scrollValues);
        mainwinScroll->setToolTip ("Scrollbar Only: Simple addition of scrollbars, the view window does not grow"
            " automatically.\n"
            "Grow Only: Original Editor behaviour. The view window grows as subviews are added. No scrollbars.\n"
            "Grow then Scroll: The view window grows. The scrollbar appears once it cannot grow any further.");

        Setting *grow = createSetting (Type_CheckBox, "grow-limit", "Grow Limit Screen");
        grow->setDefaultValue ("false");
        grow->setToolTip ("When \"Grow then Scroll\" option is selected, the window size grows to"
            " the width of the virtual desktop. \nIf this option is selected the the window growth"
            "is limited to the current screen.");
    }

    declareSection ("records", "Records");
    {
        QString defaultValue = "Icon and Text";
        QStringList values = QStringList() << defaultValue << "Icon Only" << "Text Only";

        Setting *rsd = createSetting (Type_RadioButton, "status-format",
            "Modification status display format");
        rsd->setDefaultValue (defaultValue);
        rsd->setDeclaredValues (values);

        Setting *ritd = createSetting (Type_RadioButton, "type-format",
            "ID type display format");
        ritd->setDefaultValue (defaultValue);
        ritd->setDeclaredValues (values);
    }

    declareSection ("table-input", "ID Tables");
    {
        QString inPlaceEdit ("Edit in Place");
        QString editRecord ("Edit Record");
        QString view ("View");
        QString editRecordAndClose ("Edit Record and Close");

        QStringList values;
        values
            << "None" << inPlaceEdit << editRecord << view << "Revert" << "Delete"
            << editRecordAndClose << "View and Close";

        QString toolTip = "<ul>"
            "<li>None</li>"
            "<li>Edit in Place: Edit the clicked cell</li>"
            "<li>Edit Record: Open a dialogue subview for the clicked record</li>"
            "<li>View: Open a scene subview for the clicked record (not available everywhere)</li>"
            "<li>Revert: Revert record</li>"
            "<li>Delete: Delete recordy</li>"
            "<li>Edit Record and Close: Open a dialogue subview for the clicked record and close the table subview</li>"
            "<li>View And Close: Open a scene subview for the clicked record and close the table subview</li>"
            "</ul>";

        Setting *doubleClick = createSetting (Type_ComboBox, "double", "Double Click");
        doubleClick->setDeclaredValues (values);
        doubleClick->setDefaultValue (inPlaceEdit);
        doubleClick->setToolTip ("Action on double click in table:<p>" + toolTip);

        Setting *shiftDoubleClick = createSetting (Type_ComboBox, "double-s",
            "Shift Double Click");
        shiftDoubleClick->setDeclaredValues (values);
        shiftDoubleClick->setDefaultValue (editRecord);
        shiftDoubleClick->setToolTip ("Action on shift double click in table:<p>" + toolTip);

        Setting *ctrlDoubleClick = createSetting (Type_ComboBox, "double-c",
            "Control Double Click");
        ctrlDoubleClick->setDeclaredValues (values);
        ctrlDoubleClick->setDefaultValue (view);
        ctrlDoubleClick->setToolTip ("Action on control double click in table:<p>" + toolTip);

        Setting *shiftCtrlDoubleClick = createSetting (Type_ComboBox, "double-sc",
            "Shift Control Double Click");
        shiftCtrlDoubleClick->setDeclaredValues (values);
        shiftCtrlDoubleClick->setDefaultValue (editRecordAndClose);
        shiftCtrlDoubleClick->setToolTip ("Action on shift control double click in table:<p>" + toolTip);

        QString defaultValue = "Jump and Select";
        QStringList jumpValues = QStringList() << defaultValue << "Jump Only" << "No Jump";

        Setting *jumpToAdded = createSetting (Type_RadioButton, "jump-to-added",
            "Jump to the added or cloned record.");
        jumpToAdded->setDefaultValue (defaultValue);
        jumpToAdded->setDeclaredValues (jumpValues);

        Setting *extendedConfig = createSetting (Type_CheckBox, "extended-config",
            "Manually specify affected record types for an extended delete/revert");
        extendedConfig->setDefaultValue("false");
        extendedConfig->setToolTip("Delete and revert commands have an extended form that also affects "
                                   "associated records.\n\n"
                                   "If this option is enabled, types of affected records are selected "
                                   "manually before a command execution.\nOtherwise, all associated "
                                   "records are deleted/reverted immediately.");
    }

    declareSection ("dialogues", "ID Dialogues");
    {
        Setting *toolbar = createSetting (Type_CheckBox, "toolbar", "Show toolbar");
        toolbar->setDefaultValue ("true");
    }

    declareSection ("report-input", "Reports");
    {
        QString none ("None");
        QString edit ("Edit");
        QString remove ("Remove");
        QString editAndRemove ("Edit And Remove");

        QStringList values;
        values << none << edit << remove << editAndRemove;

        QString toolTip = "<ul>"
            "<li>None</li>"
            "<li>Edit: Open a table or dialogue suitable for addressing the listed report</li>"
            "<li>Remove: Remove the report from the report table</li>"
            "<li>Edit and Remove: Open a table or dialogue suitable for addressing the listed report, then remove the report from the report table</li>"
            "</ul>";

        Setting *doubleClick = createSetting (Type_ComboBox, "double", "Double Click");
        doubleClick->setDeclaredValues (values);
        doubleClick->setDefaultValue (edit);
        doubleClick->setToolTip ("Action on double click in report table:<p>" + toolTip);

        Setting *shiftDoubleClick = createSetting (Type_ComboBox, "double-s",
            "Shift Double Click");
        shiftDoubleClick->setDeclaredValues (values);
        shiftDoubleClick->setDefaultValue (remove);
        shiftDoubleClick->setToolTip ("Action on shift double click in report table:<p>" + toolTip);

        Setting *ctrlDoubleClick = createSetting (Type_ComboBox, "double-c",
            "Control Double Click");
        ctrlDoubleClick->setDeclaredValues (values);
        ctrlDoubleClick->setDefaultValue (editAndRemove);
        ctrlDoubleClick->setToolTip ("Action on control double click in report table:<p>" + toolTip);

        Setting *shiftCtrlDoubleClick = createSetting (Type_ComboBox, "double-sc",
            "Shift Control Double Click");
        shiftCtrlDoubleClick->setDeclaredValues (values);
        shiftCtrlDoubleClick->setDefaultValue (none);
        shiftCtrlDoubleClick->setToolTip ("Action on shift control double click in report table:<p>" + toolTip);
    }

    declareSection ("search", "Search & Replace");
    {
        Setting *before = createSetting (Type_SpinBox, "char-before",
            "Characters before search string");
        before->setDefaultValue (10);
        before->setRange (0, 1000);
        before->setToolTip ("Maximum number of character to display in search result before the searched text");

        Setting *after = createSetting (Type_SpinBox, "char-after",
            "Characters after search string");
        after->setDefaultValue (10);
        after->setRange (0, 1000);
        after->setToolTip ("Maximum number of character to display in search result after the searched text");

        Setting *autoDelete = createSetting (Type_CheckBox, "auto-delete", "Delete row from result table after a successful replace");
        autoDelete->setDefaultValue ("true");
    }

    declareSection ("script-editor", "Scripts");
    {
        Setting *lineNum = createSetting (Type_CheckBox, "show-linenum", "Show Line Numbers");
        lineNum->setDefaultValue ("true");
        lineNum->setToolTip ("Show line numbers to the left of the script editor window."
                "The current row and column numbers of the text cursor are shown at the bottom.");

        Setting *monoFont = createSetting (Type_CheckBox, "mono-font", "Use monospace font");
        monoFont->setDefaultValue ("true");
        monoFont->setToolTip ("Whether to use monospaced fonts on script edit subview.");

        QString tooltip =
            "\n#RGB (each of R, G, and B is a single hex digit)"
            "\n#RRGGBB"
            "\n#RRRGGGBBB"
            "\n#RRRRGGGGBBBB"
            "\nA name from the list of colors defined in the list of SVG color keyword names."
            "\nX11 color names may also work.";

        QString modeNormal ("Normal");

        QStringList modes;
        modes << "Ignore" << modeNormal << "Strict";

        Setting *warnings = createSetting (Type_ComboBox, "warnings",
            "Warning Mode");
        warnings->setDeclaredValues (modes);
        warnings->setDefaultValue (modeNormal);
        warnings->setToolTip ("<ul>How to handle warning messages during compilation:<p>"
        "<li>Ignore: Do not report warning</li>"
        "<li>Normal: Report warning as a warning</li>"
        "<li>Strict: Promote warning to an error</li>"
        "</ul>");

        Setting *toolbar = createSetting (Type_CheckBox, "toolbar", "Show toolbar");
        toolbar->setDefaultValue ("true");

        Setting *delay = createSetting (Type_SpinBox, "compile-delay",
            "Delay between updating of source errors");
        delay->setDefaultValue (100);
        delay->setRange (0, 10000);
        delay->setToolTip ("Delay in milliseconds");

        Setting *errorHeight = createSetting (Type_SpinBox, "error-height",
            "Initial height of the error panel");
        errorHeight->setDefaultValue (100);
        errorHeight->setRange (100, 10000);

        Setting *formatInt = createSetting (Type_LineEdit, "colour-int", "Highlight Colour: Int");
        formatInt->setDefaultValues (QStringList() << "Dark magenta");
        formatInt->setToolTip ("(Default: Green) Use one of the following formats:" + tooltip);

        Setting *formatFloat = createSetting (Type_LineEdit, "colour-float", "Highlight Colour: Float");
        formatFloat->setDefaultValues (QStringList() << "Magenta");
        formatFloat->setToolTip ("(Default: Magenta) Use one of the following formats:" + tooltip);

        Setting *formatName = createSetting (Type_LineEdit, "colour-name", "Highlight Colour: Name");
        formatName->setDefaultValues (QStringList() << "Gray");
        formatName->setToolTip ("(Default: Gray) Use one of the following formats:" + tooltip);

        Setting *formatKeyword = createSetting (Type_LineEdit, "colour-keyword", "Highlight Colour: Keyword");
        formatKeyword->setDefaultValues (QStringList() << "Red");
        formatKeyword->setToolTip ("(Default: Red) Use one of the following formats:" + tooltip);

        Setting *formatSpecial = createSetting (Type_LineEdit, "colour-special", "Highlight Colour: Special");
        formatSpecial->setDefaultValues (QStringList() << "Dark yellow");
        formatSpecial->setToolTip ("(Default: Dark yellow) Use one of the following formats:" + tooltip);

        Setting *formatComment = createSetting (Type_LineEdit, "colour-comment", "Highlight Colour: Comment");
        formatComment->setDefaultValues (QStringList() << "Green");
        formatComment->setToolTip ("(Default: Green) Use one of the following formats:" + tooltip);

        Setting *formatId = createSetting (Type_LineEdit, "colour-id", "Highlight Colour: Id");
        formatId->setDefaultValues (QStringList() << "Blue");
        formatId->setToolTip ("(Default: Blue) Use one of the following formats:" + tooltip);
    }

    declareSection ("general-input", "General Input");
    {
        Setting *cycle = createSetting (Type_CheckBox, "cycle", "Cyclic next/previous");
        cycle->setDefaultValue ("false");
        cycle->setToolTip ("When using next/previous functions at the last/first item of a "
            "list go to the first/last item");
    }

    declareSection ("scene-input", "3D Scene Input");
    {
        QString left ("Left Mouse-Button");
        QString cLeft ("Ctrl-Left Mouse-Button");
        QString right ("Right Mouse-Button");
        QString cRight ("Ctrl-Right Mouse-Button");
        QString middle ("Middle Mouse-Button");
        QString cMiddle ("Ctrl-Middle Mouse-Button");

        QStringList values;
        values << left << cLeft << right << cRight << middle << cMiddle;

        Setting *primaryNavigation = createSetting (Type_ComboBox, "p-navi", "Primary Camera Navigation Button");
        primaryNavigation->setDeclaredValues (values);
        primaryNavigation->setDefaultValue (left);

        Setting *secondaryNavigation = createSetting (Type_ComboBox, "s-navi", "Secondary Camera Navigation Button");
        secondaryNavigation->setDeclaredValues (values);
        secondaryNavigation->setDefaultValue (cLeft);

        Setting *primaryEditing = createSetting (Type_ComboBox, "p-edit", "Primary Editing Button");
        primaryEditing->setDeclaredValues (values);
        primaryEditing->setDefaultValue (right);

        Setting *secondaryEditing = createSetting (Type_ComboBox, "s-edit", "Secondary Editing Button");
        secondaryEditing->setDeclaredValues (values);
        secondaryEditing->setDefaultValue (cRight);

        Setting *primarySelection = createSetting (Type_ComboBox, "p-select", "Selection Button");
        primarySelection->setDeclaredValues (values);
        primarySelection->setDefaultValue (middle);

        Setting *secondarySelection = createSetting (Type_ComboBox, "s-select", "Selection Button");
        secondarySelection->setDeclaredValues (values);
        secondarySelection->setDefaultValue (cMiddle);

        Setting *contextSensitive = createSetting (Type_CheckBox, "context-select", "Context Sensitive Selection");
        contextSensitive->setDefaultValue ("false");

        Setting *dragMouseSensitivity = createSetting (Type_DoubleSpinBox, "drag-factor",
            "Mouse sensitivity during drag operations");
        dragMouseSensitivity->setDefaultValue (1.0);
        dragMouseSensitivity->setRange (0.001, 100.0);

        Setting *dragWheelSensitivity = createSetting (Type_DoubleSpinBox, "drag-wheel-factor",
            "Mouse wheel sensitivity during drag operations");
        dragWheelSensitivity->setDefaultValue (1.0);
        dragWheelSensitivity->setRange (0.001, 100.0);

        Setting *dragShiftFactor = createSetting (Type_DoubleSpinBox, "drag-shift-factor",
            "Acceleration factor during drag operations while holding down shift");
        dragShiftFactor->setDefaultValue (4.0);
        dragShiftFactor->setRange (0.001, 100.0);
    }

    declareSection ("tooltips", "Tooltips");
    {
        Setting *scene = createSetting (Type_CheckBox, "scene", "Show Tooltips in 3D scenes");
        scene->setDefaultValue ("true");

        Setting *sceneHideBasic = createSetting (Type_CheckBox, "scene-hide-basic", "Hide basic  3D scenes tooltips");
        sceneHideBasic->setDefaultValue ("false");

        Setting *sceneDelay = createSetting (Type_SpinBox, "scene-delay",
            "Tooltip delay in milliseconds");
        sceneDelay->setDefaultValue (500);
        sceneDelay->setRange (1, 10000);
    }

    {
        /******************************************************************
        * There are three types of values:
        *
        * Declared values
        *
        *       Pre-determined values, typically for
        *       combobox drop downs and boolean (radiobutton / checkbox) labels.
        *       These values represent the total possible list of values that
        *       may define a setting.  No other values are allowed.
        *
        * Defined values
        *
        *       Values which represent the actual, current value of
        *       a setting.  For settings with declared values, this must be one
        *       or several declared values, as appropriate.
        *
        * Proxy values
        *       Values the proxy master updates the proxy slave when
        *       it's own definition is set / changed.  These are definitions for
        *       proxy slave settings, but must match any declared values the
        *       proxy slave has, if any.
        *******************************************************************/
/*
        //create setting objects, specifying the basic widget type,
        //the page name, and the view name

        Setting *masterBoolean = createSetting (Type_RadioButton, section,
                                                "Master Proxy");

        Setting *slaveBoolean = createSetting (Type_CheckBox, section,
                                                "Proxy Checkboxes");

        Setting *slaveSingleText = createSetting (Type_LineEdit, section,
                                                "Proxy TextBox 1");

        Setting *slaveMultiText = createSetting (Type_LineEdit, section,
                                                "ProxyTextBox 2");

        Setting *slaveAlphaSpinbox = createSetting (Type_SpinBox, section,
                                                "Alpha Spinbox");

        Setting *slaveIntegerSpinbox = createSetting (Type_SpinBox, section,
                                                "Int Spinbox");

        Setting *slaveDoubleSpinbox = createSetting (Type_DoubleSpinBox,
                                                section, "Double Spinbox");

        Setting *slaveSlider = createSetting (Type_Slider, section, "Slider");

        Setting *slaveDial = createSetting (Type_Dial, section, "Dial");

        //set declared values for selected views
        masterBoolean->setDeclaredValues (QStringList()
                                        << "Profile One" << "Profile Two"
                                        << "Profile Three" << "Profile Four");

        slaveBoolean->setDeclaredValues (QStringList()
                            << "One" << "Two" << "Three" << "Four" << "Five");

        slaveAlphaSpinbox->setDeclaredValues (QStringList()
                            << "One" << "Two" << "Three" << "Four");


        masterBoolean->addProxy (slaveBoolean, QList <QStringList>()
                                 << (QStringList() << "One" << "Three")
                                 << (QStringList() << "One" << "Three")
                                 << (QStringList() << "One" << "Three" << "Five")
                                 << (QStringList() << "Two" << "Four")
                                 );

        masterBoolean->addProxy (slaveSingleText, QList <QStringList>()
                                 << (QStringList() << "Text A")
                                 << (QStringList() << "Text B")
                                 << (QStringList() << "Text A")
                                 << (QStringList() << "Text C")
                                 );

        masterBoolean->addProxy (slaveMultiText, QList <QStringList>()
                                 << (QStringList() << "One" << "Three")
                                 << (QStringList() << "One" << "Three")
                                 << (QStringList() << "One" << "Three" << "Five")
                                 << (QStringList() << "Two" << "Four")
                                 );

        masterBoolean->addProxy (slaveAlphaSpinbox, QList <QStringList>()
                                 << (QStringList() << "Four")
                                 << (QStringList() << "Three")
                                 << (QStringList() << "Two")
                                 << (QStringList() << "One"));

        masterBoolean->addProxy (slaveIntegerSpinbox, QList <QStringList> ()
                                 << (QStringList() << "0")
                                 << (QStringList() << "7")
                                 << (QStringList() << "14")
                                 << (QStringList() << "21"));

        masterBoolean->addProxy (slaveDoubleSpinbox, QList <QStringList> ()
                                 << (QStringList() << "0.17")
                                 << (QStringList() << "0.34")
                                 << (QStringList() << "0.51")
                                 << (QStringList() << "0.68"));

        masterBoolean->addProxy (slaveSlider, QList <QStringList> ()
                                 << (QStringList() << "25")
                                 << (QStringList() << "50")
                                 << (QStringList() << "75")
                                 << (QStringList() << "100")
                                 );

        masterBoolean->addProxy (slaveDial, QList <QStringList> ()
                                 << (QStringList() << "25")
                                 << (QStringList() << "50")
                                 << (QStringList() << "75")
                                 << (QStringList() << "100")
                                 );

        //settings with proxies are not serialized by default
        //other settings non-serialized for demo purposes
        slaveBoolean->setSerializable (false);
        slaveSingleText->setSerializable (false);
        slaveMultiText->setSerializable (false);
        slaveAlphaSpinbox->setSerializable (false);
        slaveIntegerSpinbox->setSerializable (false);
        slaveDoubleSpinbox->setSerializable (false);
        slaveSlider->setSerializable (false);
        slaveDial->setSerializable (false);

        slaveBoolean->setDefaultValues (QStringList()
                                        << "One" << "Three" << "Five");

        slaveSingleText->setDefaultValue ("Text A");

        slaveMultiText->setDefaultValues (QStringList()
                                         << "One" << "Three" << "Five");

        slaveSingleText->setWidgetWidth (24);
        slaveMultiText->setWidgetWidth (24);

        slaveAlphaSpinbox->setDefaultValue ("Two");
        slaveAlphaSpinbox->setWidgetWidth (20);
        //slaveAlphaSpinbox->setPrefix ("No. ");
        //slaveAlphaSpinbox->setSuffix ("!");
        slaveAlphaSpinbox->setWrapping (true);

        slaveIntegerSpinbox->setDefaultValue (14);
        slaveIntegerSpinbox->setMinimum (0);
        slaveIntegerSpinbox->setMaximum (58);
        slaveIntegerSpinbox->setPrefix ("$");
        slaveIntegerSpinbox->setSuffix (".00");
        slaveIntegerSpinbox->setWidgetWidth (10);
        slaveIntegerSpinbox->setSpecialValueText ("Nothing!");

        slaveDoubleSpinbox->setDefaultValue (0.51);
        slaveDoubleSpinbox->setSingleStep(0.17);
        slaveDoubleSpinbox->setMaximum(4.0);

        slaveSlider->setMinimum (0);
        slaveSlider->setMaximum (100);
        slaveSlider->setDefaultValue (75);
        slaveSlider->setWidgetWidth (100);
        slaveSlider->setTicksAbove (true);
        slaveSlider->setTickInterval (25);

        slaveDial->setMinimum (0);
        slaveDial->setMaximum (100);
        slaveDial->setSingleStep (5);
        slaveDial->setDefaultValue (75);
        slaveDial->setTickInterval (25);
*/
        }
}